Related
Have picked up a second hand TG01, the power cable is loose as is the usb cable.
When connected via usb active sync and charging drops after a short period of time.
Is this a common issue? are there any fixes? Does anyone know which pin in the mini usb deals with sync?
thanks
alecoddlyiv said:
Have picked up a second hand TG01, the power cable is loose as is the usb cable.
When connected via usb active sync and charging drops after a short period of time.
Is this a common issue? are there any fixes? Does anyone know which pin in the mini usb deals with sync?
thanks
Click to expand...
Click to collapse
I have had this problem as well
had? Did you manage to fix it?
As far as i know I dont think so. you probable have afaulty usb cable.
try blutoothe activesync perhaps? or buy a new cable from ebay they are very cheap!
had the same Problem, so I changed to BT
anoying on big files ->> so a solution would be handy
My ActiveSync also keeps dropping, I have new cables but its still the same.
Sometimes its fine for hours and other times it dies after a few minutes but what I do is to open settings, connections and usb-pc and change to mass storage mode then change back to ActiveSync.
Tried different roms (6.1 seems to last the longest) on different machines and with different cables but nothing seems to work reliably.
dr_strangetrick said:
My ActiveSync also keeps dropping, I have new cables but its still the same.
Sometimes its fine for hours and other times it dies after a few minutes but what I do is to open settings, connections and usb-pc and change to mass storage mode then change back to ActiveSync.
Tried different roms (6.1 seems to last the longest) on different machines and with different cables but nothing seems to work reliably.
Click to expand...
Click to collapse
That's a known problem with TG01. I prefer using Wifi connection with Pocket Controller
I know you can use BT/WiFi but they suck the battery
I like to let my TG01 'trickle charge' from USB especially considering the small battery Toshiba gave us.
dr_strangetrick said:
I know you can use BT/WiFi but they suck the battery
I like to let my TG01 'trickle charge' from USB especially considering the small battery Toshiba gave us.
Click to expand...
Click to collapse
Sorry, I don't understand. USB charge always works for me (orange led lighting) don't matter if connection works or not! Even with USB connection switched to mass storage.
Pere said:
Sorry, I don't understand. USB charge always works for me (orange led lighting) don't matter if connection works or not! Even with USB connection switched to mass storage.
Click to expand...
Click to collapse
yes, pere- on my tg01 too!
Hi guys, yes usb charging works for me and when in mass storage mode but I dont want to connect via wifi/bt when activesync dies.
I would prefer for the TG01 not to keep loosing the activesync connection
To solve this, i restart my TG01. Right after the restart, i can transfer big files or list huge directories (\Windows i.e.) without connection Loss.
mine doesnt actually connect with the phone in mass storage mode, the connection is REALLY temperamental even on a mains charger - once its connected its fine but I sometimes have to try 20+ times before it starts charging.
I have also tried a new charger and a different usb cable.
This evening having fully charged it I have just installed the 6.1 mirom14 to see if it is any better but no *sob*
Hey guys, thanks for dropping by.
I have a very wierd problem, that I just cant figure out.
It all started the other day, when I found my tablet dead after having been left on and charging during the night. The tab was dead, and I feared the worst. After having left it on what seems to me like a trickle charge for several hours, I managed to get it up and running, and the tab seems fine, it was just completely out of juice.
But my troubles are not over. Whenever I'd connect the tab to the wall charger, I'd only get the red "X" symbol in the corner, and it would say MTP Initialize, even though its plugged into the standard OEM wall charger that comes with.
When I connect the tablet to my computer using the same cable, nothing happens, and by that I mean nothing. Computer doesn't start the connection process at all, its not recognized in the device manager, nothing. Not even Odin can see the tablet when I put it in download mode, the tab keeps saying "Waitting USB Cable..."
Tried this on 2 computers, still no luck, even using a USB plug on the motherboard instead of front-usb.
Now, the tablet will "trickle charge" from both the wall charger, and the computer, but nothing else happens.
I figured it could've been the ROM, so I got the latest ICS Kanang ROM downloaded, transferred it to my tab using Bluetooth, and flashed this without hassle, but the problem still persists, only now showing a regular charge icon in the lower right section, but it is still only trickle charging as far as I can tell.
All I can figure is a defective USB cable, or even worse, defective port on the tablet itself, but I'm not sure. I've ordered a new cable from DealExtreme, that will hopefully arrive sooner rather than later.
But seeing as the tab is hardly 4-5 weeks old, I find it difficult to believe the cable is the problem.
Anyone have any ideas? I'm all out at this point, so any pointers is very appreciated. Thanks.
It could be the cable. It's the part you have used in each situation. I'd wait for the cable to arrive and test it with the tablet when you get it.
Sent from my GT-P7510 using xda premium
Hey, thanks for the reply.
Yeah, I really really hope this is the case, time will tell, DealExtreme is not the quickest dealer. I'll update when I get it.
The new cable came from DX, but I'm afraid it showed no difference on anything.
The cable is working just as the original one, so that's not the problem.
Anyone have any ideas?
I guess my main goal at the moment is flashing it back to stock and un-rooting so I can get it repaired.
You mind posting a screenshot, it's kinda hard to imagine what you see by what you read For all I know my imagination went from a red X to the corner to something like an X off battousai's face.
Then again, I'd be glad to help, provided you post screenies, would be a major help
Ah, yes, I will take screenshots of anything you want to see.
Right now im on ICS preview, and these are some snapshots WITH the cable connected.
The red "X" I'm talking about you can see on the first picture on the charging icon, this happened even when the wall charger was connected on gingerbread/overcome experience rom.
The other pictures you can see it says discharging. Now, this was taken when connected to the computer, and I guess that's normal, but it also happens exactly the same when connected to the wall charger that came with the unit.
If you want screenshots of anything else, ill get it asap!
I took a poorly image of the tab connected via USB, to my computer with Odin open, hopefully you can see what it says.
If not its just what happens, I don't get further.
By the screenshots, Is the language Swedish?
Then again thanks for providing the screenies
In your first screenshot that could be part of the theme, or was it never there previously? I don't really know if it's not charging or that's supposed to be the charging icon, because for some odd reason on ICS preview I don't see that red icon anywhere.
As for the tablet, the reason why you aren't detecting it seems as though you don't have the drivers on the PC, I don't know if you installed them or you didn't mention it because I never found it being mentioned in your reply. I know it sounds silly but the same thing happened to me when I was using the tablet, (originally my 3G series belonged to my dad who knew nothing about modding so he just gave it to me and said, "do your thing" ) He did also forget to mention that you require to have the drivers to detect it via Device Manager and MTP in general, shortly the COM port will show up aswell. Perhaps re-installing the drivers should do the trick?
Made me wonder how did you install ICS in the first place if you weren't able to have it read? But I realized you could have downloaded the zip file via the tablet, On another note, how did you install CWM in the first place? o.o
Hehe, almost! Its in Norwegian on the honeycomb picture.
The red "X" would show up whenever i was connected to the PC via USB, to indicate its not charging. It will however "trickle" charge, and take 24h to charge fully with no usage and turned off.
Yes, the red icon is not on ICS, it just says not charging in the about page, as you can see from the screenshot.
Drivers have been reinstalled two or three times on two different PC's, I don't believe this is the issue.
When I bought the unit, it was working 100%
USB was okay, I flashed and rooted the unit over to "Overcome Experience".
From there I transferred ICS preview via Bluetooth and installed that way.
Have you tried factory reset to make sure all modules are reset? Maybe the USB charge module in Overcome is conflicting.
Yes.
Factory reset 3-4 times on the two different roms. I've reset everything I could find, without success.
Perhaps it has gone faulty with the tablet's plug in port, someone had the same issue although it was his wire that was at fault, it detects the charge via USB but not enough volt's to be detected by the PC, has it been grounded? Seem's more likely :| Might have to get it checked in your local center perhaps, It's how I mentioned that any metallic object is able to relay electricity despite being broken or not, you may have a broken pin for all I know :|
Hi,
I'm having exactly the same issue with my 1 month old tab 7+. I tested it using my bosses charge cable and there is no issue so I need to go to the service centre for a warranty replacement on the cable.
Hope you sort out your issue soon!
Thanks, but I don't think I have any other choice to deliver it to Samsung Europe as a payable service to get it fixed.
Purchased on a American store, and I doubt they'll take it back with flashed software.
I'm not sure really, I'll see what I end up doing. Its not the cable, that's for sure.
Hi All,
I was wondering if anyone had any insights in to this problem I have been having.
Briefly, I have the 4g lte verion on EE's new network. I purchased the official MHL/HDMI adapter which works fine and the video is outputed to my sammy 50inch tv fine. The issue I have is the battery drains while doing so. I belive this may to due to the phone outputting more than it is drawing from the power source. Any thoughts ?
I spoke with Samsung tech and they said a number of people have started to report this issue and they are currently testing/investigating. If this is indeed the case seems a pointless acessory as a long video would possibly drain the whole battery, Im yet to test the full drain time.
Secondly, with a 3rd party docking cradle with spare battery slot which purchased from amazon (http://www.amazon.co.uk/eLifeStore®-Samsung-Desktop-Charger-Docking/dp/B008PPRGFY) also does not charge phone properly. Even with the orignial charger in the ac port (or usb port) . The phone reports as charging but stays the same or decreases. Charged directly from the socket it is fine. Strange!
Any help or thoughts would be greatly appreciated.
Thanks
Ian
It's common. Mine did that too! I switched to my old S2 charger, problem solved
Thanks Ill try that out, any idea why that works ?
lawboffin said:
Thanks Ill try that out, any idea why that works ?
Click to expand...
Click to collapse
No idea man? A design fault maybe? All I know is that my phone took for f#*%ing ever to charge with the USB type wall charger. I pulled it out of the socket and plugged my other other one in that was sitting right next to it and it started charging? Checked a few minutes later and it had climbed considerably so I pulled the USB cable out of the new plug and kicked it under the bed where it now lays resting not to be used again LOL.
USB plug/cord works perfectly fine? So I use it on the computer. My laptop even charges the phone via the USB cable faster than the socket plug (which is usually the opposite - as I am sure we are all aware). So yeah I would say poor design or defective wall plug or both or something? Wasn't going to send my phone back because of it. 2second decision problem solved Samsung phone is great!
Im having exactly the same problem.
I have an s3 on orange and have the same mhl adapter conected to my tv.
I have tried the charger from my s3 which does says its charging when I connect my phone but only for about a minute so I also tried using the charger from my s2 and that just does exactly the same.
An easier way is to buy the official allshare dongle for your hdtv then you can stream anything from your phones screen direct to your tv and can have the phone on charge via pc or wall socket at the same time,
Hope this helps
i suggest you throw away your original charger (slow charge) and its usb cable (loose - actually caused the extsd to become damaged to the point i had to repartition) and buy yourself a cheap usb cable for data (£2) and a 3rd party charger (pref not a usb adapter one - £5) and all should be fine!
I still experienced a small battery drain while using the mhl adapter, however, i froze a few apps with titianuim (ones i know run all the time like utter and tasker, paragon ntfs, easy ums, directory bind etc), and put it on min brightness - works like a charm. I know its a effort freezing apps but does the trick with my phone... Since finding that out i actually keep paragon & easy ums frozen till i need them...
just a few thoughts for you....
This guide will help you:
- diagnose charging problems;- fix problems with the touchscreen while charging;I decided to write this because I searched for my problems on-line and never found a complete answer, just partial undocumented answers, essentially guesses from people, tried them, most didn't work, wasted a lot of time with trials so I hope this will save some people some time.
1. My phone says it's charging but the battery level drops or stays the same.
This is common when you are not using the original charger, but in order to check if you phone is actually charging you need to look in dmesg for something like this:
Code:
ab8500-charger ab8500-charger.0: VBUS input current limit set to[B] 500 mA[/B]
When connected to a computer (USB 2.0 port), you will usually see a limit of 500mA, and when connected to a car/ac charger, you will usually see a limit of 1500mA. If the charger is defective or not recognized by the phone you will see 0mA, even if the phone will look like it's charging it's actually not charging!
2. I get touch screen errors when my phone is connected to a PC or when charging.
It took me a while to figure this out, but it's quite simple, you need to check that your outlet is grounded. Once you plug your notebook/laptop/computer/charger into a grounded outlet all problems will go away. If you can't get a grounded outlet but still need to use your phone while plugged into your notebook/laptop remove the charger from the notebook/laptop and all will be fine.
The touch screen problems can also be fixed some times by using another charger, but this is a process of trial and error, for example I managed to get 2 chargers to work from 10.
thanks man... great post.... already clicked thanks button....
I'm wondering if anyone has suffered with and recovered from the sudden case of no charging/USB>PC recognition?
I've seen countless similar stories across the web, covering many of the Z Family. Some were simple reset jobbies, and I've seen as in-depth as what I'm assuming is an IC being removed, flux cleaned and re-applied (w ww .you tube. com/watch?v=ZyCeNfc99a0).
I purchased a new charger port and also a new battery, as I figured with all the insane constant burning of my pocket, it could use a new one. I'd hoped it was just a charger port issue, but much to my dismay, the issue still persists after fitting them.
I've tried every single button combination "fix", and all to no avail. Multiple leads, charger units, all that polava. Checked and cleaned connections with isopropyl alcohol, checked for burned-out looking mainboard components, at least those that are visible.
I was having minor inconsistent charging issues for a while, up until last Friday. I figured it was the USB port on the phone or the leads, and put it down to general wear and tear.
Last Friday I was at my mates house with super low battery, popped it on charge round his and I noticed it had died completely and kept boot cycling, like the charger was being plugged in and taken out over and over.
I took it out and tried it when I got home with the regular charger, and nothing. My phone is otherwise in mint condition and has been looked after since day one release in the UK.
I'm wondering if some super helpful person here would possibly have some other alternatives that haven't been mentioned, whether a hardware bypass or some trick that isn't amidst the countless cries for help out there.
Many thanks in advance.
Hello,
I have a problem when connecting to a charger it will go in strange charging mode that actually does not charge. It makes the sound like a charger is connected, no charging animation on battery though...
The problem for me it was the USB cable used for charging (i have changed 5 of them in 1 and a half years). Also same behavior happens when using a under 1A wall charger.
P.S. : The USB cables that i have changed they still work fine with other devices/phones .... but not with my Z5C. I`m not sure what but is definetly something wrong withe phone usb port (and it is not dirt).
no, but
I cannot get a usable USB connection to my computer, but if I hold Volume Up while connecting the USB cable to the computer, the charger LED turns red for a moment, then blue. It WILL charge in this mode, which I think is fastboot mode. Someone said it bypasses the charge circuitry or software, which makes me think that maybe I could go into developer mode and turn on OEM unlocking to see if I can stop it from trying to optimize charging. I also have not tried all the USB connection modes yet.
I tried to charge with this blue light technique on the wall charger, but that did not work. Just ran the battery down again and I could not boot the phone.
I know if I press Volume Down while connecting the USB cable to my computer that the charger LED turns green, but I am not sure it will charge in that mode. I think this is for flashing or something, but since my computer does not recognize the USB device no matter what I do, I don't think flashing is an option.
Oh, and when I do charge the phone with the blue light special (old obscure USA discount retailer reference), for some reason the charger LED flashes white every 4 to 5 seconds, but it seems to keep enough charge to get me through at least the day until I can charge again by same method.
Maybe we can keep pooling info here. I got the blue light technique from someone else on this site, so there are people here who know quite a bit about this phone, thankfully.
Well, I had that issue, too (at least it sounds pretty familiar).
https://forum.xda-developers.com/z5-compact/help/wont-off-issues-t3485575
Does your phone also believe to be connected to "something" all the time?
I fear there is some IC fried, although I never dared to open my phone.
My "solution" was to talk my local salesman into giving me a (used, but working) replacement phone, and I did not want him to find any traces of DIY
So, no, I never found a technical solution, probably they just scrapped my phone for spare parts, idk.
The root cause for my error (probably) was a faulty charger, therefore I am pretty sure I fried something hardware-like, but depending on your cause, ymmv.
Anyway, trying to clean your USB port, re-soldering the connector and/or replacing the battery sounds like being worth a try, anyway.
// edit: "cat /sys/class/power_supply/usb/present" used to always output 1, even when not connected. On my now-good Z5C this works like it should (connected ->1, not connected -> 0)
Hey people. I have tried all the tricks for several days. Tried several charging cables. Nothing worked for me. I just brought a new phone, and it came with a cheapo charging cable. Decided to plug it into my Xperia and it worked. Maybe a little fairy fixed my phone when I was out buying a new one. Anyway, I'm love my Xperia Z5. Using it right now. Good luck people