Hi all
Starting to think this is a hardware fault as I have tried all I can software wise but thought I would check with others.
I was on Batista 3.5 and flashed to 3.5 returns, my home button started to go wrong, i was having to press it many times for it to work, a day later and now it does not work, i tried flashing other roms/stock/wipes/all i can think of but the home button is just not working, i dont know if its hardware or that the rom has messed up my home button, i would say hardware but problem was that another guy was having same issue as me.....................anyone had this? any fix?
If it is a ROM issue then try a different ROM, a Stock ROM, if it persists then it's a hardware problem, you need to do RMA, sadly.
Regards.
tried other roms and back on stock but same problem...seems it is HW problem.
cheers
Related
I post this question on few ROM threads, and hoped, that with new ROM version it will dissappear. But, neither with PROven 3.2 neiter with ROMeOS 1.95.3, it still persist.
Sometimes - many times a day - hardware button get mixed. For example "phone up" turns into left, od stop working etc.
It is ROM independent and I'm affraid, it is hardware problem to the servise...
Has anyone similar problem?
No one has similar problem, so it is probably hardware problem. So it needs TP to send to service...
Hi guys , had a weird problem with my end call/power button.
Out of no where my end call button stopped working. I've found its most annoying because i usually press it to turn the screen off ( lock the screen)
The button doesnt appear to be broken or anything and doesnt work when i press hard
I did a software factory reset this morning via the phone and the button started working again! but its gone 3 hours later again!
I havent recently installed anything and it appeared out of the blue... any help??!
Same problem here! Nothing helped, hard reset, another custom rom, back to stock rom and radio...nothing. Hardware failure, I suspect. Sending it back to factory under warranty. Never had a hardware problem before in 12 yrs using mobile phones.
kinda fixed it now, dont know how though, did a hard rest and formatted mem card, removed everything and didnt reinstall half the stuff i used to have inc all the cabs from here.
its working now on the new rom just fine, but its the first time its happened to me too, and i didnt even do anything !
try a hard reset and wipe and reinstall youre old cabs at ure own risk!
sl1200 said:
Same problem here! Nothing helped, hard reset, another custom rom, back to stock rom and radio...nothing. Hardware failure, I suspect. Sending it back to factory under warranty. Never had a hardware problem before in 12 yrs using mobile phones.
Click to expand...
Click to collapse
Same happens for me too, not all endkey, but my home key is started to work as call key, back and windows key started to work as volume up key.
I am really annoyed guys!! help me out guys!!
any solution mine too is not working since last night did hard rest but still no luck
Hi everyone.
I got some trouble with my Samsung Galaxy S II.
The home button (the physical one just under the screen) sometimes work and sometimes doesn't want to work anymore.
I'm trying to understand why it works or doesn't.
I'm going to try to reset the firmware and put the original kernel back.
If someone got some advices,
Thanks.
Update : Still doing the trick, Back to original fw and kernel changed nothing.
How can a that expensive phone have a button that sometimes works, sometimes doesn't ?
It is an hardware problem i guess ...
Noone faced the same problem ?
Hey there,
Everytime I try to activate the front camera I either get a 'cannot open camera' error or just a black screen (even though I can change the settings), sometimes I just get a FC after few seconds.
I tried using different camera application and all I get is a black screen, some application allow me to take a picture but the result is just a completely black image.
I don't know what triggered the problem, it was pretty sudden. I was on CM7. Even after a complete wipe and flashing olympus rom, nothing has changed.
I tried cleaning the cache, rebooting, everything I can think of.
Looking for older threads in the forums didn't result any useful information.
Help would be very much appreciated.
bump?
Have you flashed a full blur ROM yet to make sure it isn't a hardware issue?
Sent from my Atrix with XDA Premium
Lets say I go back to motion blur rom and nothing changes, will it confirm that it is certainly a hardware issue? Thanks for the respond.
I haven't mentioned it but the LED doesn't work too.
Its possible that a cable was knocked loose. If you verify it is a hardware issue, you can void your warranty and take apart your phone to try and fix it following instructions here: http://www.ifixit.com/Teardown/Motorola-Atrix-4G-Teardown/4964/1
I dropped my phone in some water, and the volume up button was acting like it was always being pressed (really annoying when rebooting as it kept kicking into RSD mode). I managed to disassemble it and clean the button, and now it works great again.
Is the only way to verify is to install motion blur rom? If so, is there any recommendation for a specific rom that might give me the most accurate indication that it's a hardware issue?
Thanks for the quick respond.
I would say that as soon as you have tried a ROM with a different kernel, you have verified a hardware issue.
Changed to motion blur based rom, still dead.
I guess it's a hardware issue.
Btw I dont know why I wrote it's the front camera but I meant the back camera so if it's BACK Camera+LED Light and switching roms/format/hardreset didn't help so it's a hardware problem.
I'll try and contact Motorola since I still have warranty.
Dear memeber
i have a new problem with my htc legend its sometimes when i need to do something the touch screen give me a wrong selection and other times it not respond ,,, i do a restart for the phone and it back to work .. but i can't keep turn the phone off and re on it if somebody no how to fix this error its will be great and i keep the screen clean from everything i keep clean it but that is not help
Hello,
It happens too with my old ROM (B0.4.8), but didn't find the origin of the problem.
Sometimes it happens with my new ROM (CM9 Beta4) but only when I charge it (when by USB), as soon as I disconnect the cable, the phone is functionnal...
yeah but its not a problem with the room because i didn't do anything for the Os on it .. it just start like this sometimes it respond other times no .. if it work you have to made a selection many time or restart the phone
I experience it too. As I remembered after installing HomICS Venus this problem occur. I do not know whether its ROM related or not. I tried to flash another ROM ex. BlaYO ROM and CRQ 1.3 but the problems still persist.
I had this problem too - sent it to HTC and they exchanged my Legend for a new one ----- as I heared it is a common problem and has to do with the grounding of the touchscreen -> that is why it works sometimes and sometimes it doesnt
Sorry to say that I too suffer from this problem. Also, the part of my screen, where the power widget on the notification bar is resting, is completely unresponsive. I need to use the trackball to hit those buttons. And also, sometimes the screen can just go bananas and go into spasmic movements on its own. In my frustration once I hit the screen really hard with my knuckles and that temporarily fixed the spasmic movements. But it still reoccurs. I assume I would need my warranty to replace my phone, but my warranty has already ran out.
I can also confirm that it has NOTHING to do with your ROM. It started for me when I was running CyanogenMod 7.1, but I still have the same problems on stock ROM, HomICS, Miui, basically any ROM.