[Q] Revolutionary not working... Why? - Thunderbolt Q&A, Help & Troubleshooting

I am trying to root an HTC Thunderbolt with Hboot 1.04.0000. I tried using Revolutionary to gain S-Off and it has not been working. It recognizes the device, allows me to enter my beta key but it always says it's an invalid key and aborts, then closes. Why is this and is there anything I can do to fix it? Any help is greatly appreciated. I have attached a screenshot of the process when it is "completed."
Edit: I got it to work finally. It was my work PC's proxy config that disabled Revolutionary from downloading recovery. All is well now. Thanks for your responses though.

Got me, but neither of the sites for AlphaRevX or revolution are working so far as I can tell. From what I'm reading I don't think you can't obtain a correct key unless the site is up and providing them. That might be part of the problem.

I think that was the issue. I tried it later and it worked seamlessly. However it did not install clockwork mod so I am now facing that issue...

nickelghandi said:
I think that was the issue. I tried it later and it worked seamlessly. However it did not install clockwork mod so I am now facing that issue...
Click to expand...
Click to collapse
That's easy to fix. Download ROM Manager and install it through that.

That's the issue. It says something about the service not being good enough. I cannot remember the exact error message; it's my friend's phone. Anyway it has either full 3G or WiFi depending upon whether I turn on WiFi or not so there cannot possibly be an issue with the service. I won't have the phone in-hand again until tomorrow, but I can give instructions to my friend as to what to do.
Edit: He got root checker and it said that something was not configured properly. Could running Revolutionary again fix this or would it not do anything?

Revolutionary gives you S-OFF but DOES NOT give you root
You need to install this, straight from their FAQ
http://goo-inside.me/superuser/su-2.3.6.3-efgh-signed.zip
You need to install superuser to get gain root.
as for the beta key invalid it's because you Need to COPY and PASTE it
You do so by clicking the title bar, edit, paste then it will work

ScoobarSTI said:
Revolutionary gives you S-OFF but DOES NOT give you root
You need to install this, straight from their FAQ
http://goo-inside.me/superuser/su-2.3.6.3-efgh-signed.zip
You need to install superuser to get gain root.
as for the beta key invalid it's because you Need to COPY and PASTE it
You do so by clicking the title bar, edit, paste then it will work
Click to expand...
Click to collapse
In order to flash that you will need Clockworkmod Recovery installed. Use the directions in the thread I linked to install Clockworkmod recovery from bootloader. ~~> http://forum.xda-developers.com/showthread.php?t=1179386
Also download the Su-2.3.6.3 zip from ScoobarSTI's post and put it on your sdcard. Once you flash clockwork recovery in the bootloader via the thread I linked reboot into recovery and flash the Su-2.3.6.3 zip. Once you do that you will be rooted.
Sent from my HTC Thunderbolt

I had a similar problem, mine ended up being my inability to figure out the case of a "C", worked perfectly after that.

Thanks to all that replied. For some reason, revolutionary did not install clockwork Mod after it got s-off. I ran it again and it ended up doing it fine. Now the Thunderbolt is rooted and ready for a custom ROM. Any suggestions on which ROM to go with? I need a stable one with sense 3.0 that is decent on speed and battery.
Sent from my HTC EVO 4G White with Kinged Shooter ROM and stock kernel using XDA App.

It does NOT install Clockwork. It will prompt you to download it, but that's it.

I'm Trying to run revolutionary and keep closing instanly need help

Bamf and synergy both have pretty sweet 3.0 roms
Sent from my tbolt running ShiftTh3ory AOSP

My beta key wont work!!!!
My beta key wont work....help please thanks!!!!!!!

dlneal86 said:
My beta key wont work....help please thanks!!!!!!!
Click to expand...
Click to collapse
You may be getting letters and numbers confused like me with o0O and Il1 that got me many tines, is kind of process of elimination lol
Sent from my Thunderbolt using Tapatalk

jaquanxda said:
I'm Trying to run revolutionary and keep closing instanly need help
Click to expand...
Click to collapse
you probably have htc sync installed... if you do, you will need to uninstall it before you can run the revolutionary application.

Copy the beta key and then paste it.
This will work fine. I did the same thing typing over and over. I about gave up.
Good luck
Edward
Sent from my ADR6400L using xda premium

just watch the youtube video on it.
It's step by step instructions AND has the solution to everybody's issues in this thread.

PhillyCheez said:
just watch the youtube video on it.
It's step by step instructions AND has the solution to everybody's issues in this thread.
Click to expand...
Click to collapse
NO IT DOESN'T. As great as the video is, it does not address the Beta key not working.
My beta key isn't working. I have tried the pasting using the title bar and doing edit paste and it does paste the key just fine, but it keeps telling me it is invalid. I uninstalled HTC Sync like one person said and still doesn't.
Any help?

Sorry, but none of us can help you with your key issue. That's something only they can help with. I got s-off last night with this method with no problems.
Sent from my ADR6400L using XDA App

I also copied and pasted the beta key and kept getting invalid key. Any help?

Related

Did I mess up my root? Detailed description of the steps I took.

Ok so let me explain further what I have done as I believe I may have seriously botched this process at some point...
Step 1- I followed MobileTech Videos instructions on how to apply Adeo v0.1 . I downloaded all the drivers from their website. This worked flawless and I quickly rebooted and checked and had the Reboot option after pressing the power button so I continued on.
Step 2 - I downloaded Super One click ran the ROOT option and everything worked flawlessly once again.
Step 3 - Downloaded Boxy and after a reboot it worked and installed perfectly. After checking in Titanium backup I realized I had root.
Step 4 I downloaded the Theme pack from mobiletech and followed their video instructions.. I get stuck each time right before the boxy process..
Now when running Super one click and click ROOT or SHELL ROOT the application freezes (not responding from windows) and I get no where.
At the time my phone works perfectly but I am very curious what is going on.. Any advice for someone new to Android will help ease my nerves. Thanks!
JoshRH said:
Ok so let me explain further what I have done as I believe I may have seriously botched this process at some point...
Step 1- I followed MobileTech Videos instructions on how to apply Adeo v0.1 . I downloaded all the drivers from their website. This worked flawless and I quickly rebooted and checked and had the Reboot option after pressing the power button so I continued on.
Step 2 - I downloaded Super One click ran the ROOT option and everything worked flawlessly once again.
Step 3 - Downloaded Boxy and after a reboot it worked and installed perfectly. After checking in Titanium backup I realized I had root.
Step 4 I downloaded the Theme pack from mobiletech and followed their video instructions.. I get stuck each time right before the boxy process..
Now when running Super one click and click ROOT or SHELL ROOT the application freezes (not responding from windows) and I get no where.
At the time my phone works perfectly but I am very curious what is going on.. Any advice for someone new to Android will help ease my nerves. Thanks!
Click to expand...
Click to collapse
Have you tried Designgears aroot? Superineclick installs busybox twice due to busybix already installed by moto by default. If you run aroot it'll clear up that mess.
Sent from my MB860 using XDA Premium App
Thank you so much for your reply... I downloaded A ROOT and ran it but it only took maybe .5 seconds to run completely and my phone never re-booted.. I re-booted manually.. Is this normal?
Sadly this did not fix the issues I am dealing with.. When trying to install the Adeo rom over top of itself I get an error saying "device not found" as well as having the installer of the gingerbread theme getting stuck. At this point, although my post has not been up long, I would be willing to PayPal someone for any additional help in fixing my issue.
JoshRH said:
Sadly this did not fix the issues I am dealing with.. When trying to install the Adeo rom over top of itself I get an error saying "device not found" as well as having the installer of the gingerbread theme getting stuck. At this point, although my post has not been up long, I would be willing to PayPal someone for any additional help in fixing my issue.
Click to expand...
Click to collapse
It takes a while for aRoot's reboot to occur. Run aRoot again and leave it be. Be patient.
Possibly you lost adb. Trying using the adb fix here in the forum?
Sent from my MB860 using XDA Premium App
Very good call and thanks again for the suggestions.. I am missing my ADBD file and have read the thread but am curious how to transfer this file to root explorer? I downloaded the app but can't for the life of me figure out how to transfer the file.
I was able to get the ADBD file to download and once unzipping the file and adding it to the correct location with the right permissions I am still getting the device offline error.. I truly am stuck at this point.. Anyone have any thoughts?

helpful info to help you root and s-off

read this before you brick your device. It will only take 5 mins of your time. THIS DOES NOT INSTALL ROOT only s-off and it is permanent on the 3vo and sensation. Root can be downloaded from the link, as well as instructions/
http://unrevoked.com/rootwiki/doku.php/public/revolutionary
thanks and hope this helps some of you
I am s-off, rooted, and have a working recovery that is nandroiding my phone as we speak
*MODS*
I am only starting this thread to help, i see a lot of people having issues/ Please move if you need too.
Thanks,
welrope said:
read this before you brick your device. It will only take 5 mins of your time. THIS DOES NOT INSTALL ROOT only s-off and it is permanent on the 3vo and sensation. Root can be downloaded from the link, as well as instructions/
http://unrevoked.com/rootwiki/doku.p.../revolutionary
thanks and hope this helps some of you
I am s-off, rooted, and have a working recovery that is nandroiding my phone as we speak
*MODS*
I am only starting this thread to help, i see a lot of people having issues/ Please move if you need too.
Thanks,
Click to expand...
Click to collapse
your link is broken. error 404
bradbusa said:
your link is broken. error 404
Click to expand...
Click to collapse
Thanks for the heads up, it works now!
It only says to flash su zip from recovery but doesn't say how to get recovery, any tut on how to get recovery?
Sent from my PG86100 using XDA Premium App
-eVo- said:
It only says to flash su zip from recovery but doesn't say how to get recovery, any tut on how to get recovery?
Sent from my PG86100 using XDA Premium App
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1192245
good directions in the first post
The root file is not downloading for me from the goo.me site. Will someone please post a different link for the su file to root. Thanks
TheMike1 said:
The root file is not downloading for me from the goo.me site. Will someone please post a different link for the su file to root. Thanks
Click to expand...
Click to collapse
http://dl.dropbox.com/u/26733192/su-2.3.6.3-efgh-fixed-unsigned.zip
here ya go....this one worked for me....all apps work now
How to Enter Recovery/Clockworkmod
1. Unplug USB
2. Turn the device off
3. Hold volume down button (HOLD IT) and press power
4. Hboot will start. Navigate to recovery with the vol down button. Press power to select and enter recovery.
Regards,
JDC4429
also make sure htc sync is uninstalled, simply being disabled will not help.
franky_402 said:
also make sure htc sync is uninstalled, simply being disabled will not help.
Click to expand...
Click to collapse
That's not true. I just exited out of it in the taskbar and everything worked.
mwalt2 said:
That's not true. I just exited out of it in the taskbar and everything worked.
Click to expand...
Click to collapse
so then if it is just disabled it still must have some processes running that is interfering with revolution. Fully exiting must close everything then. As long as it works.
Just so everyone knows when my wouldnt work it was sitting at
acquiring root (method 3)...
so if that is happening to anyone make sure htc sync is fully exited or uninstalled! I never used htc sync i had just installed it for drivers so it was no big deal to me to uninstall!!
I have uninstalled HTC sync and am still stuck at acquiring root (method 3)

Revolutionary 0.4pre is live!

http://twitter.com/#!/alpharevx/status/102826334820110336
Revolutionary 0.4pre is live! Support all GB roms, new devices: Thunderbolt, Evo 4G, MT4GS, Evo 3D GSM! revolutionary.io #Revolutionary
we dont need to reflash the s-off do we ??
No why would you?
Sent from my PG86100 using Tapatalk
WOOOHOOOOOOOOO!!!!!!!!
Thx man, for the great news.
jgalan14 said:
No why would you?
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
just making sure
Nice the gsm
So i've tryed it on my EVO 3D GSM and worked like a charm.
Thx guys.
I choose the HBOOT 1.40 because 1.49 wasn't available from dropdownlist, but i am sure that will be fixed in the coming days
nice now i can root my pops OG evo so he will quit *****ing about it even though i told him not to accept the damn GB update
If I'm not mistaken this is only for rooting correct. This is not a updated recovery. NEVERMIND ITS JUST FOR ROOTING.
Rooted 3D in full affect
Icant get the recovery image downloaded... at that point, the program dies...? "Stopped working"...?
Ive tried with both 0.4pre1 and pre2.
I can start the procedure again, and the programe states that Im S-OFF and starts to download the image again, but stops working...
Am I the only one with this problem?
Oops I posted a thread on the same thing. Sorry Cheezy. I didn't even see this and I did look before posting. Hopefully the mods will delete mine.
Where is it?
housry23 said:
Oops I posted a thread on the same thing. Sorry Cheezy. I didn't even see this and I did look before posting. Hopefully the mods will delete mine.
Click to expand...
Click to collapse
no worries man
HBOOT 1.49.0008 still not working
And i got so excited.
Jakedude2011 said:
Icant get the recovery image downloaded... at that point, the program dies...? "Stopped working"...?
Ive tried with both 0.4pre1 and pre2.
I can start the procedure again, and the programe states that Im S-OFF and starts to download the image again, but stops working...
Am I the only one with this problem?
Click to expand...
Click to collapse
I had the smae proble S-oof worked but Recovery clockworkmod failed and in deed win7 x64 unexpectecly shutdown the dos-screen.
I now downloaded the pre3 one and everything worked just re-run it it says it's already s-off but then asks you to download clockwork mod . This time everything wen't fine
Yep... thats confirmed... win64 made errors when downloading the image.
But the pre3 fixed that, and know I got Revolutionary CWM v4.0.1.4.
Nice... S-OFF and Revolutionary CWM v4.0.1.4.
How ecxatly do I flash the "su-2.3.6.3-efgh-signed.zip" file in recovery?
Any wipes or just a straight flash?
No support yet for Rogers 0008 units
I did it straight forward but i had some issues downloaded several version of the net and found this i attached it in this post that worked for me all the others gave errors while installing.
Now it's fully rooted.
Noob question: what is this for?
Sent from my PG86100 using XDA Premium App
janvk said:
I did it straight forward but i had some issues downloaded several version of the net and found this i attached it in this post that worked for me all the others gave errors while installing.
Now it's fully rooted.
Click to expand...
Click to collapse
Weird... same here... the file I got, gave an error when flashing. (aborted status 0) but when I rebooted with violently beating heart, it just was rooted and all was good. Busybox could install and rootexplorer was apple to get in to every folder now. And both programs got superuser rights. wohoooo nice!!
(thx, janvk... flashed again with your file, and got no errors this time! )
Jakedude2011 said:
Weird... same here... the file I got, gave an error when flashing. (aborted status 0) but when I rebooted with violently beating heart, it just was rooted and all was good. Busybox could install and rootexplorer was apple to get in to every folder now. And both programs got superuser rights. wohoooo nice!!
(thx, janvk... flashed again with your file, and got no errors this time! )
Click to expand...
Click to collapse
Your welcome

[Q] Can't Figure Out How to Root

I need help with rooting my phone. I have gone to:
http://forum.xda-developers.com/showthread.php?t=1957155
http://forum.xda-developers.com/showthread.php?t=2043636
http://forum.xda-developers.com/forumdisplay.php?f=1884#tutorial
I first started out with Samsung Galaxy Note II Kit. But, the update said I needed to do something about unlocking my boot loader, so I went to the Adam Outtler page. But, he says in the first post that this won't work If you do it with an OTA update after January 18, 2012. Well, I didn't notice that first anyways and tried Odin, and all it would do mainly was fail, or setup connection would take forever, and even Casual says:
/system/bin/sh: su: not found
noroot
DEVICE IS NOT ROOTED! ROOT YOUR DEVICE! Install any VRALJB ROM --Adam Outler
What I think I need to do is uninstall the OTA update, but most people I have seen do it through a rooted phone, but I don't have one yet. I have no idea what to do, and I am really confused and don't want to hard brick or screw up my phone. Could anyone help me with this? I am sorry if I am being stupid about this, but the only thing I ever rooted was a NOOK tablet which was simple.
P.S. I am sorry but if anyone respond between the times of 10am-12pm today, and 4pm-12am today, I will not be able to respond due to work arrangements I have for today.
First confirm the baseband: System Settings > About Phone > Baseband. If it shows VRALL4, you have the update and need to use the updated root and unlock method here - http://forum.xda-developers.com/showthread.php?t=2118348
Just go slowly and follow the directions (measure twice and cut once), its pretty easy. Good luck.
start at section 1 of my guide...then if youwant to unlock follow adams thread. make sure to use his latest "jailbreak" method(the one linked in my guide).
If you on the latest software from Verizon, just use Adams guide. That's all I did. Need any help let me know!
Or just follow this dude here.
https://www.youtube.com/watch?v=5RAnj9DgMKo&feature=youtube_gdata_player
Sent from my SCH-I605 using xda app-developers app
evolishesh said:
If you on the latest software from Verizon, just use Adams guide. That's all I did. Need any help let me know!
Or just follow this dude here.
https://www.youtube.com/watch?v=5RAnj9DgMKo&feature=youtube_gdata_player
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
the last thing i would recomend is using anything other than adams or my thread. also the op may just want root, which he can simply place root66 in odin and be done. the latest software adds no benifit other than if you like to internet bench race.
tfly212 said:
First confirm the baseband: System Settings > About Phone > Baseband. If it shows VRALL4, you have the update and need to use the updated root and unlock method here - http://forum.xda-developers.com/showthread.php?t=2118348
Just go slowly and follow the directions (measure twice and cut once), its pretty easy. Good luck.
Click to expand...
Click to collapse
Okay I'll try this. Thanks guys, I'll tell you all if I have anymore problems.
droidstyle said:
the last thing i would recomend is using anything other than adams or my thread. also the op may just want root, which he can simply place root66 in odin and be done. the latest software adds no benifit other than if you like to internet bench race.
Click to expand...
Click to collapse
Well this is what I used on my Note 2, and had no issues. But, the OP can use whatever he wants. I was just suggesting what's the easiest method to me. Thanks for pointing it out
Sent from my SCH-I605 using xda app-developers app
Ok, well I got everything together, I got TWRP and thus it is rooted. But, now I'm trying to install Cyanogen mod 10, using this video.
http://www.youtube.com/watch?v=x0_j-L2iaP4
But, not using those files because those are for Sprint and I am instead using the files here.
http://forum.xda-developers.com/showthread.php?t=2047734
But, once I try to put the roms up, it says I failed in TWRP, I have no idea why to.
jaaajaa102 said:
Ok, well I got everything together, I got TWRP and thus it is rooted. But, now I'm trying to install Cyanogen mod 10, using this video.
http://www.youtube.com/watch?v=x0_j-L2iaP4
But, not using those files because those are for Sprint and I am instead using the files here.
http://forum.xda-developers.com/showthread.php?t=2047734
But, once I try to put the roms up, it says I failed in TWRP, I have no idea why to.
Click to expand...
Click to collapse
Maybe u got a bad download... Try downloading the rom again.. Make sure u back everything up..and make sure u got the latest recovery from goo manager... Good luck Homie...
!GaNgStA Gn2!!!
jaaajaa102 said:
Ok, well I got everything together, I got TWRP and thus it is rooted. But, now I'm trying to install Cyanogen mod 10, using this video.
http://www.youtube.com/watch?v=x0_j-L2iaP4
But, not using those files because those are for Sprint and I am instead using the files here.
http://forum.xda-developers.com/showthread.php?t=2047734
But, once I try to put the roms up, it says I failed in TWRP, I have no idea why to.
Click to expand...
Click to collapse
Use goo manager and update your twrp
Sent from my SCH-I605 using Tapatalk 2

[Q] Am I too late to root

It has been over a year since I got this phone. Normally, I rooted the day I received a new phone. But I didn't think that I had any reason to do so this time until I bought a Chromebook. Now I really need to tether.
Can someone show me where to start? It seems that most the threads I have looked at are pretty old and just spent a couple of hours going no where.
Current software is 4.4.2.
Thanks.
realsol said:
It has been over a year since I got this phone. Normally, I rooted the day I received a new phone. But I didn't think that I had any reason to do so this time until I bought a Chromebook. Now I really need to tether.
Can someone show me where to start? It seems that most the threads I have looked at are pretty old and just spent a couple of hours going no where.
Current software is 4.4.2.
Thanks.
Click to expand...
Click to collapse
http://rumrunner.us
Sent from my HTC6600LVW using XDA Premium 4 mobile app
Does rumrunner work on 4.4.2? If not you may need to use firewater instead.
Drunkula said:
Does rumrunner work on 4.4.2? If not you may need to use firewater instead.
Click to expand...
Click to collapse
Firewater definitely works. I just got a DNA last night, running 4.4.2 and locked up. Temp rooted and ran Firewater and literally about 5 mins later I am unlocked and S-Off. :good:
OP did rumrunner work for you? I'm in the same situation trying to get hotspot to work after the KitKat update. Thanks
vjetti said:
OP did rumrunner work for you? I'm in the same situation trying to get hotspot to work after the KitKat update. Thanks
Click to expand...
Click to collapse
You could use pdanet
Sent from my HTC6600LVW using XDA Premium 4 mobile app
I rooted and unlocked the bootloader on the OTA Kit Kat. I thought it wasn't possible at first, but Weaksauce and Firewater will do it.
mulhiny said:
Firewater definitely works. I just got a DNA last night, running 4.4.2 and locked up. Temp rooted and ran Firewater and literally about 5 mins later I am unlocked and S-Off. :good:
Click to expand...
Click to collapse
Could you possibly give me more details on how you did this. It has been more then 2 years since I rooted anything and I don't want to do anything wrong. Since you were successful with the same phone and software I have I would really appreciate it.
realsol said:
Could you possibly give me more details on how you did this. It has been more then 2 years since I rooted anything and I don't want to do anything wrong. Since you were successful with the same phone and software I have I would really appreciate it.
Click to expand...
Click to collapse
Hi there. First thing is making sure you have all the proper drivers installed and HTC Sync uninstalled.
I then installed the app to temp root and ran Firewater. The terminal commands are on the firewater site....if you need more detail or even a step by step, I'm happy to help and write something up. I just can't tonight as I have an obligation to attend to.
Let me know how you make out and if you need additional assistance I'll write something up tomorrow around this time.
Sent from my thumbs
mulhiny said:
Hi there. First thing is making sure you have all the proper drivers installed and HTC Sync uninstalled.
I then installed the app to temp root and ran Firewater. The terminal commands are on the firewater site....if you need more detail or even a step by step, I'm happy to help and write something up. I just can't tonight as I have an obligation to attend to.
Let me know how you make out and if you need additional assistance I'll write something up tomorrow around this time.
Click to expand...
Click to collapse
Thanks for the reply. I have the instructions for Weaksauce and Firewater, but I don't want to make any mistakes here.
Where can I find the latest HTC DNA drivers without installing the HTC Sync program?
Where can I find the latest ADB download?
It looks like these are the last things I need to find before continuing.
I'm at work, but this evening I'll either find you a link or upload them to my dropbox. Hang in there...I'll help ya out lol...soon as you have everything, its literally like a 5 min process.
Sent from my thumbs
mulhiny said:
I'm at work, but this evening I'll either find you a link or upload them to my dropbox. Hang in there...I'll help ya out lol...soon as you have everything, its literally like a 5 min process.
Sent from my thumbs
Click to expand...
Click to collapse
Thanks. You have been very helpful. I have rooted 6 devices without a problem, but always rooted when the device was new along with the tools to root. Alwayw made me nervous though.
Thanks again...
realsol said:
Thanks. You have been very helpful. I have rooted 6 devices without a problem, but always rooted when the device was new along with the tools to root. Alwayw made me nervous though.
Thanks again...
Click to expand...
Click to collapse
Haven't forgotten ya...I'm just getting home. Have a few things to attend to.
You can get the HTC drivers from this post right here : http://forum.xda-developers.com/showthread.php?t=2000896
Ok, download the SDK from here : http://developer.android.com/sdk/index.html?hl=sk
Make sure USB debugging is turned on. Install the attached weaksauce apk for temp root. You can verify you're rooted by downloading superSU and root checker from the play store.
Unpack the SDK and you'll want to put the firewater file in the folder titled : adt-bundle-windows-x86_64-20140321
Open a terminal from this folder by holding down shift and right clicking the folder, "open command window here"
Follow the commands given on the firewater site.
Profit.
Once S-off and unlocked go to the TWRP thread in original development and download a recovery. Flash that via fastboot.
Then flash super user zip for root...again, search that out. I'm running out of time so I can't right now...lol
This is all I did. Collect all your files first. Make sure your drivers are good to go before starting. Install the drivers, reboot the pc and plug the phone into the usb. Likely a driver install thingy will pop up with like 5 little circles...let it finish before you begin.
Good luck bro...I'll check in tomorrow or later tonight to see how you made out.
**I take no credit for any files linked or attached.**
Sent from my living room
Good luck bro...I'll check in tomorrow or later tonight to see how you made out.
**I take no credit for any files linked or attached.** [/QUOTE said:
Thanks much. I will get started tonight and let you know how it goes. Thanks for taking the time on a Friday night.
Click to expand...
Click to collapse
mulhiny said:
Haven't forgotten ya...I'm just getting home. Have a few things to attend to.
You can get the HTC drivers from this post right here : http://forum.xda-developers.com/showthread.php?t=2000896
Ok, download the SDK from here : http://developer.android.com/sdk/index.html?hl=sk
Make sure USB debugging is turned on. Install the attached weaksauce apk for temp root. You can verify you're rooted by downloading superSU and root checker from the play store.
Unpack the SDK and you'll want to put the firewater file in the folder titled : adt-bundle-windows-x86_64-20140321
Open a terminal from this folder by holding down shift and right clicking the folder, "open command window here"
Follow the commands given on the firewater site.
Profit.
Once S-off and unlocked go to the TWRP thread in original development and download a recovery. Flash that via fastboot.
Then flash super user zip for root...again, search that out. I'm running out of time so I can't right now...lol
This is all I did. Collect all your files first. Make sure your drivers are good to go before starting. Install the drivers, reboot the pc and plug the phone into the usb. Likely a driver install thingy will pop up with like 5 little circles...let it finish before you begin.
Good luck bro...I'll check in tomorrow or later tonight to see how you made out.
**I take no credit for any files linked or attached.**
Sent from my living room
Click to expand...
Click to collapse
Well, didn't work for me. I am guessing I might have tried to root months ago. I drank a lot back then. When I ran WeakSauce, it said I was already rooted and did nothing. Then I ran Root Check, and it said I wasn't rooted. But I moved on through the steps. But when I got to the last step in FireWater, it said I need to run as root.
I noticed I had SuperSU app installed. So I uninstalled that, uninstalled WeakSauce, re-installed both and started over, but got the same results.
Not sure where to go from here. I almost feel like I should just do a Factory Reset and start over, but that could really screw things up too.
Man, sure am sorry to hear that..maybe a full RUU would fix you up. Then start over...I'm not sure. Maybe someone with more in depth knowledge needs to chime in here..
bummer.....
mulhiny said:
Man, sure am sorry to hear that..maybe a full RUU would fix you up. Then start over...I'm not sure. Maybe someone with more in depth knowledge needs to chime in here..
bummer.....
Click to expand...
Click to collapse
You know, now that I think about it, I did have full root before, but I wasn't thinking one night and got an OTA update that made me loose root. Maybe that is why I can't use weaksauce. I decided to start in my bootloader. Attached is a screen shot. Tried to go into recovery, but that failed. Just came up with a picture of a battery or something. Had to hold the power button down for 10 seconds just to boot normally.
Does the screen shot tell you anything? It tells me, I think, that the phone is S-off'ed and unlocked. but firewater complained about not being rooted. I am confused.
realsol said:
You know, now that I think about it, I did have full root before, but I wasn't thinking one night and got an OTA update that made me loose root. Maybe that is why I can't use weaksauce. I decided to start in my bootloader. Attached is a screen shot. Tried to go into recovery, but that failed. Just came up with a picture of a battery or something. Had to hold the power button down for 10 seconds just to boot normally.
Does the screen shot tell you anything? It tells me, I think, that the phone is S-off'ed and unlocked. but firewater complained about not being rooted. I am confused.
Click to expand...
Click to collapse
Hey, your phone is already unlocked! So just flash supersu thorough Fastboot to get root.
realsol said:
You know, now that I think about it, I did have full root before, but I wasn't thinking one night and got an OTA update that made me loose root. Maybe that is why I can't use weaksauce. I decided to start in my bootloader. Attached is a screen shot. Tried to go into recovery, but that failed. Just came up with a picture of a battery or something. Had to hold the power button down for 10 seconds just to boot normally.
Does the screen shot tell you anything? It tells me, I think, that the phone is S-off'ed and unlocked. but firewater complained about not being rooted. I am confused.
Click to expand...
Click to collapse
As said right above me....you're all set to go. Use fast boot to push a recovery and then flash super su zip. If you need the zip I can attach it later.
Sent from my living room
mulhiny said:
As said right above me....you're all set to go. Use fast boot to push a recovery and then flash super su zip. If you need the zip I can attach it later.
Sent from my living room
Click to expand...
Click to collapse
Funny. There have been other threads where people are asking how to root DNA 4.4.2. They have been referring them to this thread So I guess I am not SO dumb.
Anyhow, as I remember, there are a couple of ways to flash. 1) from the PC using ADB and from the phone using an IMG file right? What is the easiest way to flash the Recover file? Which version of ClockWorkMod is going to be compatible with 4.4.2 and where would I find the download? Also, one last question, which SuperSU version is going to be compatible and where is the best download?

Categories

Resources