hy
how root the lg optimus pro ?
need a guide thanks
1 º Download this suite of applications that I use (I added the zip original drivers from LG, which, with no specific model for this, worked like a charm):
www.megaupload.com/?d=U3L199Z3
2 Reset the phone manufactures (who have data to backup, use the File maneger Astro, for example), to obtain a clean file system Settings \ Privacy \ Reset factory data;
3 Extract the zip to a folder on your desktop and install the USB drivers, which are in the zip, the folder "USB driver";
4 Connect the phone to pc cable and expect drivers to be installed;
5 º Go to the pc start \ programs \ accessories \ command line;
6 After you open the command line type:
cd \
cd Users
cd (user name in question)
cd Desktop
cd (name of which are powered uncompressed zip files)
cd ADB
and the result is something like: C: \ Users \ (user name) \ Desktop \ Root Maximo LG Pro \ ADB
then enter the following commands:
adb devices (pressenter)
adb shell (press enter, and then the letter of the command line will pass to $)
echo 1> / data / local / lge_adb.conf (press enter)
7 After these commands inserted, turn off and then turn on the phone (very important this step), always with the phone connected by USB;
8 After restarting the phone, go to the folder where the files are downloaded and run the SuperOneClick.exe;
9 Select the method GingerBreak and click "ROOT"
10 When the process finishes (VERY IMPORTANT) make sure you turn off and turn it on again and update the application through the superuser Market.
That's it. Phone with root access.
Credits go to: Bruno Pinto @ AndroidPT
Hi,
I've tried as you say, and i jammed on the driver installation. Why? On the pack you've posted, there's only a shortcut to the driver file: LGUnitedMobileDriver_S4981MAN32AP22_ML_WHQL_Ver_3.2 - Atalho
and when clicking it its giving me a link to something that doesn't exist:
C:\Users\"username"\Desktop\LGUnitedMobileDriver_S4981MAN32AP22_ML_WHQL_Ver_3.2.exe
Even so, i'd already had installed the LG software suite and so i've got the driver so i moved to the next steps.
when going to perform the adb shell command (error: device not found), i tried with mass storage mode on and off and msg is always the same.
can you please help me?
thanks for any answer
That guide is so complicated for n00b like me who has never before used Android. The stock rom is awfull anyway, any hope for costum roms on this one?
Hi!!
After running the adb command line and restart the mobile, i've started the super one click, it started rooting and in the end in step 7 he says "Remounting /system with read-write access .... FAILED", what went wrong?
I have the latest drivers for this smart and the latest super one click v.2.1.1
My LG has the 2.3.4 version of android and it's from TMN
Regards
is it possible to unlock it? (for free preferably)
hugoafsilva said:
Hi,
I've tried as you say, and i jammed on the driver installation. Why? On the pack you've posted, there's only a shortcut to the driver file: LGUnitedMobileDriver_S4981MAN32AP22_ML_WHQL_Ver_3.2 - Atalho
and when clicking it its giving me a link to something that doesn't exist:
C:\Users\"username"\Desktop\LGUnitedMobileDriver_S4981MAN32AP22_ML_WHQL_Ver_3.2.exe
Even so, i'd already had installed the LG software suite and so i've got the driver so i moved to the next steps.
when going to perform the adb shell command (error: device not found), i tried with mass storage mode on and off and msg is always the same.
can you please help me?
thanks for any answer
Click to expand...
Click to collapse
the drivers are here: http://www.mediafire.com/?85wvjkp5ytb816y
This is NOT complicated method and it works great. I have also tried this on Optimus Net and works fine
Help..! Help..!
I have an LG-C660 Android Gingerbread 2.3.4
1 - Does anyone has an Android version fot this device..?
2 - After Root the device, it boots but dont´s shows the Desktop. It´s stucks on Carrier Screen
3 - Please Help me..!
I tried as instructions but the adb driver can't be successfully installed. I've tried installing drivers many times but it doesn't work.
Done! I removed the SD card and it worked finally!
i have a lg C660 from TMN with v2.3.4 i've tried and tried and cant make it work. anyone got it to work?
Edit :: with superoneclick v2.1.1 i get this
SuperOneClick v2.1.1.0
Checking drivers...
Killing ADB Server...
* server not running *
OK 0,10s
Starting ADB Server...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
OK 4,14s
Waiting for device...
OK 0,08s
2.3.4
Getting manufacturer...
LGE
OK 0,02s
Getting model...
LG-C660
OK 0,03s
Getting version...
V10c-Aug-25-2011.2ED2FC6537
OK 0,03s
Checking if rooted...
False
OK 0,06s
Installing BusyBox (temporary)... - Step #1
2039 KB/s (1062992 bytes in 0.509s)
OK 0,59s
Installing BusyBox (temporary)... - Step #2
OK 0,03s
Rooting device... - Step #1
OK 0,02s
Rooting device... - Step #2
OK 0,03s
Rooting device... - Step #3
782 KB/s (16830 bytes in 0.021s)
OK 0,10s
Rooting device... - Step #4
OK 0,04s
Rooting device... - Step #5
OK 0,02s
Rooting device... - Step #6
[**] Gingerbreak/Honeybomb -- android 2.[2,3], 3.0 softbreak
[**] (C) 2010-2011 The Android Exploid Crew. All rights reserved.
[**] Kudos to jenzi, the #brownpants-party, the Open Source folks,
[**] Zynamics for ARM skills and Onkel Budi
[**] donate to [email protected] if you like
[**] Exploit may take a while!
[+] Plain Gingerbread mode!
[+] Found PT_DYNAMIC of size 232 (29 entries)
[+] Found GOT: 0x00014354
[+] Using device /devices/platform/msm_sdcc.1/mmc_host
[*] vold: 0000 GOT start: 0x00014354 GOT end: 0x00014394
OK 80,24s
Rooting device... - Step #7
OK 8,08s
Remounting /system with read-write access...
mount: Operation not permitted
FAILED ::
When you get the #6 step you have to disable and enable debug usb on the device..in this way it should work
Sent from my LG-C660 using Tapatalk
Sir i have tried the above procedure. But after "loading gingerbreak" nothing happens. i have waited for half hour.Please tell me what went wrong?
some body know how to get in recovery mode ´cuz i can root my c660 i have gingerbread 2.3.4
i have rooted my gf's phone and made a custom ROM for her i made it for her only !
Step 5 and Step 7 problem
EDIT:
Finally Done. I used SuperOneClick v2.2 and removed the SD card (only in settings) and on step five just disable and enable usb debugging. I feel like alchymist.
And now i am looking how i can custom default rom.
simmer14 said:
i have rooted my gf's phone and made a custom ROM for her i made it for her only !
Click to expand...
Click to collapse
sir kindly make one for us too.. we are sick of Stock ROM...
unabl to root every =time it gets strucked on step 7... somebody help me
Installed at last after 3 days hardwork :/ :/
Related
Hello people!
As I'm fairly new to the whole android scene I'm having trouble understanding how I'm supposed to re-root my Galaxy S 2 after updating it to the most recent firmware. I do not want to replace the ROM at all as I'm quite content with the stock ROM and want to avoid random force closes/missing features, which is what I got in the last couple of custom ROMs.
I just want it rooted so that I can remove the bloatware Samsung bundle with the phone, and also to customise the usability of the phone (bootscreen, CRT effect, improved/silent camera etc).
However when using SuperOneClick 2.0 Beta 1 to try and root it, I get as far as:
SuperOneClick v2.0.0.0
Checking drivers…
Killing ADB Server…
OK
Starting ADB Server…
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
OK
Waiting for device…
OK
2.3.4
Getting manufacturer…
HTC
OK
Getting model…
Nexus One
OK
Getting version…
85805
OK
Checking if rooted…
False
OK
Rooting device… – Step #1
OK
Rooting device… – Step #2
OK
Rooting device… – Step #3
684 KB/s (16830 bytes in 0.024s)
OK
Rooting device… – Step #4
OK
Rooting device… – Step #5
$ cd /data/local/tmp/
$ ./GingerBreak
[**] Gingerbreak/Honeybomb — android 2.[2,3], 3.0 softbreak
[**] (C) 2010-2011 The Android Exploid Crew. All rights reserved.
[**] Kudos to jenzi, the #brownpants-party, the Open Source folks,
[**] Zynamics for ARM skills and Onkel Budi
[**] donate to (email) if you like
[**] Exploit may take a while!
[+] Plain Gingerbread mode!
[+] Found PT_DYNAMIC of size 232 (29 entries)
[+] Found GOT: 0×00014344
[+] Using device /devices/platform/goldfish_mmc.0
[*] vold: 0000 GOT start: 0×00014344 GOT end: 0×00014384
OK
Rooting device… – Step #6
OK
Rooting device… – Step #7
OK
Installing BusyBox (temporary)… – Step #1
1186 KB/s (1062992 bytes in 0.875s)
OK
Installing BusyBox (temporary)… – Step #2
OK
Getting mount path…
/dev/block/mtdblock3
OK
Remounting /system with read-write access…
mount: Operation not permitted
FAILED
I have tried search other topics and they mention having to reflash with an unofficial ROM, but not really linking to which one, and I'm not sure if it's retaining the stock ROM in the way I want it to (aka, untouched, just rooted so I can customise it myself).
Any assistance would be greatly appreciated!
You have to flash at least an insecure kernel for SuperOneClick to work on the SGS2.
You can also flash a kernel that takes care of all the rooting, like CF-Root or maybe even mine
Don't confuse this with flashing a complete custom ROM, it's only the kernel, but that one needs to be flashed in order to root.
Removed my post here as I found a kernal to use when I get home.
Thank you very much for the clarifications given.
I was really happy havin my ROOTED S.ony Tablet S, but unfortunately am not able to root again after a update.
Details:
S.ONY TABLET S 16GB (3G)
Country: India
Android Version: 3.2.1 (Release2)
Baseband Version: R3B01
Kernel Version: 2.6.36.3
Hop I have provided needed info.
Thanks for all the updates from "XDA"
Under "Kernel Version" mine says
2.6.36.3
[email protected] #1
What does it say on yours ?
If you have [email protected] #1 or above you are unable to root at this time.
kryddan said:
Under "Kernel Version" mine says
2.6.36.3
[email protected] #1
What does it say on yours ?
If you have [email protected] #1 or above you are unable to root at this time.
Click to expand...
Click to collapse
Thanks for replying bro:
Mine says :: [email protected] #1
And so i am unable to root right ???
So how can I root again ???
coolfire000 said:
Thanks for replying bro:
Mine says :: [email protected] #1
And so i am unable to root right ???
So how can I root again ???
Click to expand...
Click to collapse
That is correct. As of now you are not able to root your tablet, since you have build10. I guess all you can do now is wait and see if someone root the later builds or what for ICS and hope for root.
Not sure if you could try and flash an older rom with recovery, and therein get root?
kryddan said:
That is correct. As of now you are not able to root your tablet, since you have build10. I guess all you can do now is wait and see if someone root the later builds or what for ICS and hope for root.
Not sure if you could try and flash an older rom with recovery, and therein get root?
Click to expand...
Click to collapse
Ok thanks for the replies bro, will wait the things as am a newbie to all this things.
Hope to get ICS and rooted both.
Please . . . . .
Any idea about ICS ?
kryddan said:
Under "Kernel Version" mine says
2.6.36.3
[email protected] #1
What does it say on yours ?
If you have [email protected] #1 or above you are unable to root at this time.
Click to expand...
Click to collapse
I Have [email protected] #1 and I rooted my device following the instructions of the developers.
This will work on all build?
I have build 10. Thank you so much.
Can you provide me some link
rfreeman said:
I Have [email protected] #1 and I rooted my device following the instructions of the developers.
Click to expand...
Click to collapse
Hi can you please prove some link as am a bit newbie I hope you'll help
When I tried using Root 1.1, I got the following output
[*]
[*] Sony Tablet S root script v1.1 (Windows version)
[*] by Dan Rosenberg (@djrbliss).
[*]
[*] Before continuing, ensure USB debugging is enabled, that ADB
[*] is working properly, and that your tablet is connected via USB.
[*] You've got to have proper MPT driver to root your tab!
[*] (MPT driver - wpdmtp.inf included).
[*]
[*] WARNING: This exploit may result in wiping your /data partition,
[*] causing you to lose any applications and data on your tablet.
[*] There should be no risk of permanent damage to your device, but
[*] by running this script you accept all responsibility.
[*] +small mods/optimizations by Konrad Plaszczykowski (@condi)+
[*]
[*] FULLY AUTOMATIC - ROOT SHOULD TAKE ABOUT ~ 3min 10s.
[*] Press enter to root your tablet...
[*]
[*] Waiting for device...
* daemon not running. starting it now *
* daemon started successfully *
[*] MTP driver has been disabled.
[*] Device found.
[*] Pushing log flooder to device...
failed to copy 'flood' to '/log/flood': Permission denied
Unable to chmod /log/flood: No such file or directory
[*] Preparing to append to packages.list...
link failed File exists
[*] Rebooting device...
[*] Waiting for tablet to reboot...... (~20s)
* daemon not running. starting it now *
* daemon started successfully *
error: protocol fault (no status)
[*] Attempting to move system package library directory...
* daemon not running. starting it now *
* daemon started successfully *
error: device not found
error: device not found
error: device not found
[*] Rebooting device...
error: device not found
[*] Waiting for tablet to reboot...... (~40s)
[*] Attempting to insert fake local.prop entry...
link failed File exists
/log/flood: not found
[*] Rebooting device...
[*] Waiting for tablet to reboot...... (~40s)
[*] Attemping persistence...
remount failed: Operation not permitted
failed to copy 'su' to '/system/bin/su': Read-only file system
Unable to chmod /system/bin/su: No such file or directory
failed to copy 'busybox' to '/system/xbin/busybox': Read-only file system
Unable to chmod /system/xbin/busybox: No such file or directory
/system/xbin/busybox: not found
failed to copy 'Superuser.apk' to '/system/app/Superuser.apk': Read-only file sy
stem
[*] Cleaning up...
failed on '/data/data/com.google.android.location/lib.bak' - No such file or dir
ectory
[*] Rebooting...... (~35s)
[*] MTP driver has been enabled back.
[*] Exploit complete!
[*] Press any key to exit.
Click to expand...
Click to collapse
coolfire000 said:
Hi can you please prove some link as am a bit newbie I hope you'll help
Click to expand...
Click to collapse
Use S.onlyTablet.S v1.1 it has builtin check if your device is rootable.
condi said:
Use S.onlyTablet.S v1.1 it has builtin check if your device is rootable.
Click to expand...
Click to collapse
Thanks for reply bro, but getting the following error:
[*] Sony Tablet S root script v1.1 (Windows version)
[*] by Dan Rosenberg (@djrbliss).
[*]
[*] Before continuing, ensure USB debugging is enabled, that ADB
[*] is working properly, and that your tablet is connected via USB.
[*] You've got to have proper MPT driver to root your tab!
[*] (MPT driver - wpdmtp.inf included).
[*]
[*] WARNING: This exploit may result in wiping your /data partition,
[*] causing you to lose any applications and data on your tablet.
[*] There should be no risk of permanent damage to your device, but
[*] by running this script you accept all responsibility.
[*]
[*] +small mods/optimizations by Konrad Plaszczykowski (@condi)+
[*]
[*] FULLY AUTOMATIC - ROOT SHOULD TAKE ABOUT ~ 3min 10s.
[*] Press enter to root your tablet...
[*]
[*] Waiting for device...
* daemon not running. starting it now *
* daemon started successfully *
[*] It looks that your device is [for now] not rootable...
[*] In your kernel version exploit vulnerability has been locked down...
[*] You need to wait for DEVs to find another way...
[*] Press any key to exit.
Click to expand...
Click to collapse
Solution to all
Check if u hav enabled usb debugging ... n unknown sources ..in the setting... u cn use tis file ... whch ucn find in the Android development area too..... nt responsible for any damage to ure device ...
coolfire000 said:
Thanks for reply bro, but getting the following error:
[*] It looks that your device is [for now] not rootable...[*] In your kernel version exploit vulnerability has been locked down...[*] You need to wait for DEVs to find another way...
[*] Press any key to exit.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Yep, exactly as it says. No solution for now. You need to wait
T0Tal_N00b said:
Check if u hav enabled usb debugging ... n unknown sources ..in the setting... u cn use tis file ... whch ucn find in the Android development area too..... nt responsible for any damage to ure device ...
Click to expand...
Click to collapse
No need to reupload tool, its available in official S.onyTablet.S thread.
br!
condi
Can build 9 be rooted?
Sent from my E16i using xda premium
mine says
Android Version: 3.2.1 (Release2)
2.6.36.3
[email protected] #1
it just hangs after daemon successful luanch... im using xp on vmware btw.
D00QLE said:
mine says
Android Version: 3.2.1 (Release2)
2.6.36.3
[email protected] #1
it just hangs after daemon successful luanch... im using xp on vmware btw.
Click to expand...
Click to collapse
does the XP on vmware detects ur tablet s?(like: adb devices (does this show u ur tablet? )) i was using Oracle VirtualMachine and i had to passthrough my USB devices to my guest OS. Perhaps u might want to check that(usb passthrough on vmware) out.
Maybe USB 1.1 only ?
I had to disable Oracle VirtualBox USB 2.0 support extension to get the tablet recognized by ADB in a Windows XP VM running under a Linux (Debian Squeeze) host...
Keep checking the build #
I purchased my Tablet S (refurbished) last week. It came with Build10. The first thing I did after turning it on was check to Build#.
However, after restarting a few times it reverted to Build5. I am not sure why that happened, but I was able to root using the All In One. I think someone else here had this happen also.
I *may* have run a Sony update on the previous restart. (It was late and I can't remember)
I guess you got it with FW 3.2 and Kernel build#10
Then you did a update to 3.2.1R2 with kernel build#5.
Could you remember?
zerod78 said:
does the XP on vmware detects ur tablet s?(like: adb devices (does this show u ur tablet? )) i was using Oracle VirtualMachine and i had to passthrough my USB devices to my guest OS. Perhaps u might want to check that(usb passthrough on vmware) out.
Click to expand...
Click to collapse
problem solved, it was the
echo 0x54c >> %HOMEPATH%\.android\adb_usb.ini
Click to expand...
Click to collapse
i though i had to add echo but no
Lets just go straight to the point :
Make sure that you've :
- Downloaded and extracted 'DooMLoRD's Easy Rooting Toolkit [v4.0](zergRush Exploit)' (ref : http://forum.xda-developers.com/showthread.php?t=1321582)
- Installed Android SDK to enable you to run ADB shell
- Enabled 'Unknown Sources' in your phone
- Enabled 'USB Debugging' in your phone
Step 1 :
- Open command line as Administrator and go to 'android-sdk/platform-tools' folder
- Run this command :
adb devices (after this command you should see your device id)
adb shell
echo 1 > /data/local/lge_adb.conf
- Leave the cmd windows open
Step 2 :
- Go to DooMLorD folder
- run 'runme.bat'
- press 'Enter' once and then once more
VOILA!!
p/s : You can close the 'cmd' windows now
Superoneclick method is better which dosent need android sdk installed
its just another way. no biggie
I rooted my O1 with Superoneclick and I recommend it , fast and safe
Sorry, where can i found superoneclick?
i have O1 with last ginger update, it's compatible?
kyrulamri said:
Lets just go straight to the point :
Make sure that you've :
- Downloaded and extracted 'DooMLoRD's Easy Rooting Toolkit [v4.0](zergRush Exploit)' (ref : http://forum.xda-developers.com/showthread.php?t=1321582)
- Installed Android SDK to enable you to run ADB shell
- Enabled 'Unknown Sources' in your phone
- Enabled 'USB Debugging' in your phone
Step 1 :
- Open command line as Administrator and go to 'android-sdk/platform-tools' folder
- Run this command :
adb devices (after this command you should see your device id)
adb shell
echo 1 > /data/local/lge_adb.conf
- Leave the cmd windows open
Step 2 :
- Go to DooMLorD folder
- run 'runme.bat'
- press 'Enter' once and then once more
VOILA!!
p/s : You can close the 'cmd' windows now
Click to expand...
Click to collapse
Superoneclick has zergRush exploit in it and more.
Anyone wanting to root their phone or flash baseband go into my guide, link is in my signature
Hello,
to cut a long story short I have my device with this configuration:
Smartphone: Motorola RAZR XT910
ROM: 982.124.14.XT910.Retail.en.EU
Kernel: 3.0.8-g7198280 [email protected] #1 SMP PREEMPT
The problems that I am experiencing:
1) Neither Mac, Win, nor Linux detect my RAZR when I connect it to the computer. Weird thing is that RSD (on Win) and Terminal (Linux) seem to detect the phone.
I tried switching ON/OFF USB debugging, Mass Storage, MTP but no luck at all.
2) I cannot root it! When I try to apply the Dan Rosenberg method all I get is:
[email protected]:/tmp/share$ sudo ./run.sh
[+] Waiting for device...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
[+] Device found.
[+] Pushing exploit...
3791 KB/s (366952 bytes in 0.094s)
4466 KB/s (1867568 bytes in 0.408s)
1559 KB/s (64498 bytes in 0.040s)
4031 KB/s (1578585 bytes in 0.382s)
pkg: /data/local/tmp/Superuser.apk
Success
[+] Rooting phone...
[+] Your phone may appear to reboot. Please ignore this and continue with the exploit.
/system/bin/sh: /storage/rfs0/pwn: not found
[+] Please press any hardware button on your phone.
[+] Don't worry if the phone is unresponsive at this time.
[+] The device will vibrate when the exploit is complete.
[+] Press enter to continue once the device has vibrated.
Then it does not vibrate and no root is applied.
No luck either with this http://forum.xda-developers.com/showthread.php?t=2257137
3) I cannot boot into recovery! When I switch on pressing Power + VolUp + VolDown I get into the screen with robot & red ! triangle but even pressing buttons from there does not take me anywere! I don't know what to do.
4) Last but not least I would like to unlock the bootloader and change kernel. I got to know that this 982.124.14.XT910.Retail.en.EU appears to lock you yet I would like to ask if someone found some turnaround.
Can you help me?
Thanks a lot for the support!
Alberto
albertaz said:
Hello,
to cut a long story short I have my device with this configuration:
Smartphone: Motorola RAZR XT910
ROM: 982.124.14.XT910.Retail.en.EU
Kernel: 3.0.8-g7198280 [email protected] #1 SMP PREEMPT
The problems that I am experiencing:
1) Neither Mac, Win, nor Linux detect my RAZR when I connect it to the computer. Weird thing is that RSD (on Win) and Terminal (Linux) seem to detect the phone.
I tried switching ON/OFF USB debugging, Mass Storage, MTP but no luck at all.
2) I cannot root it! When I try to apply the Dan Rosenberg method all I get is:
[email protected]:/tmp/share$ sudo ./run.sh
[+] Waiting for device...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
[+] Device found.
[+] Pushing exploit...
3791 KB/s (366952 bytes in 0.094s)
4466 KB/s (1867568 bytes in 0.408s)
1559 KB/s (64498 bytes in 0.040s)
4031 KB/s (1578585 bytes in 0.382s)
pkg: /data/local/tmp/Superuser.apk
Success
[+] Rooting phone...
[+] Your phone may appear to reboot. Please ignore this and continue with the exploit.
/system/bin/sh: /storage/rfs0/pwn: not found
[+] Please press any hardware button on your phone.
[+] Don't worry if the phone is unresponsive at this time.
[+] The device will vibrate when the exploit is complete.
[+] Press enter to continue once the device has vibrated.
Then it does not vibrate and no root is applied.
No luck either with this http://forum.xda-developers.com/showthread.php?t=2257137
3) I cannot boot into recovery! When I switch on pressing Power + VolUp + VolDown I get into the screen with robot & red ! triangle but even pressing buttons from there does not take me anywere! I don't know what to do.
4) Last but not least I would like to unlock the bootloader and change kernel. I got to know that this 982.124.14.XT910.Retail.en.EU appears to lock you yet I would like to ask if someone found some turnaround.
Can you help me?
Thanks a lot for the support!
Alberto
Click to expand...
Click to collapse
Have you installed the latest drivers? Sounds like that's you issue..
And to boot into recovery turn off your device then press power+volume up+volume down and select recovery,when you get to the android with red triangle press volume up+volume down for about 10 seconds I think then let go and you'll enter to the recovery mode.
Sent from my XT910 using xda premium
Thanks for the reply.
Yes, I have the latest drivers installed both on Win and on Mac, as for Linux I guess they are not needed
Yet nothing happens... On Win I keep hearing that notifications sound but nothing shows up. On the RAZR screen I read something like "AT command service start", "AT command service stop" when I plus/unplug it to the PC USB. And that's it
As for the recovery: thanks a lot. It worked although I had to try a couple of times as the device sometimes freezes even during that boot stage.
AztekSoul said:
Have you installed the latest drivers? Sounds like that's you issue..
And to boot into recovery turn off your device then press power+volume up+volume down and select recovery,when you get to the android with red triangle press volume up+volume down for about 10 seconds I think then let go and you'll enter to the recovery mode.
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
I got the same problem when updated to JB to root the phone. Just try to root again since phone couldnot root first time i tried. Then i run the script again and it was ok...
After several attempts I used a linux computer and did step by step what Dan described in his root procedure.
I found out that there was a last problem which was that the phone was looking for "rfs1" while the "run.sh" on linux was using "rsf0" so I edite the "run.sh" file in the folder /tmp/share (you should find that at line 47):
echo "[+] Rooting phone..."
echo "[+] Your phone may appear to reboot. Please ignore this and continue with the exploit."
$adb shell /storage/rfs0/pwn 1 ---> I modified that into $adb shell /storage/rfs1/pwn
then I saved and re-applied the last part of the ROOT procedure and it worked smoothly.
2) USB connection reappeared!
ersink said:
I got the same problem when updated to JB to root the phone. Just try to root again since phone couldnot root first time i tried. Then i run the script again and it was ok...
Click to expand...
Click to collapse
albertaz said:
After several attempts I used a linux computer and did step by step what Dan described in his root procedure.
I found out that there was a last problem which was that the phone was looking for "rfs1" while the "run.sh" on linux was using "rsf0" so I edite the "run.sh" file in the folder /tmp/share (you should find that at line 47):
echo "[+] Rooting phone..."
echo "[+] Your phone may appear to reboot. Please ignore this and continue with the exploit."
$adb shell /storage/rfs0/pwn 1 ---> I modified that into $adb shell /storage/rfs1/pwn
then I saved and re-applied the last part of the ROOT procedure and it worked smoothly.
2) USB connection reappeared!
Click to expand...
Click to collapse
That's useful info. I always try custom roms and smtimes razr got soft bricked so i flash the firmware again then root again. Every rooting process i stuck first then reroot the phone. This is the situation why at first try phone cannot rooted.
Hi, I have a stock Tablet Z on 10.7.A.0.222
I have successfully unlocked the bootloader via instructions on xperia firmware. However I have been unable to root it or install twrp.
I am a complete noob at this but the tablet is running incredibly laggy as stock so want to refresh it. I was using this guide:
https://www.cyanogenmods.org/forums/topic/xperia-tablet-z-cm14-cyanogenmod-14-nougat-7-0-rom/
In that guide I got to 1b which led me to this guide for installing recovery:
https://www.cyanogenmods.org/forums/topic/install-twrp-recovery-android-using-fastboot/
When i try to do step 6 the tablet shuts off and does not go into bootloader mode where I can flash twrp.
Can someone provide direction on what I need to do differently? I have done various searches on this site and I believe there is not a recovery installed in this firmware version or something and that is preventing me from being able to do this step but I am not sure how I get around that.
cward0625 said:
Can someone provide direction on what I need to do differently? I have done various searches on this site and I believe there is not a recovery installed in this firmware version or something and that is preventing me from being able to do this step but I am not sure how I get around that.
Click to expand...
Click to collapse
Hello!
Look at this thread.
Rootk1t said:
Hello!
Look at this thread.
Click to expand...
Click to collapse
Thanks for the response, I had referred to this guide too but was unable to get this step to work for me->
- Root. Follow Bin4ry root : http://forum.xda-developers.com/show....php?t=1886460
Download : http://forum.xda-developers.com/show....php?t=1886460
Below is what I get in the command prompt when doing the steps. When I tried option 4 for new xperia root it did not work...it just hangs here:
======================================================================
= This script will root your Android phone with adb restore function =
= Script by Bin4ry =
= (15.06.2014) v36 =
======================================================================
Device type:
0) New Z2 Root Method by cubeandcube (thanks man!)
1) 2014 root (thx jcase for nice pwn binary and xsacha for the exploit)
2) Xperia Root by cubeundcube
3) New Standard-Root (thx Ariel Berkman)
4) New Xperia Root by Goroh_kun (Xperia Z, Xperia V [JellyBean] ...)
5) Old
6) Old-Special (for example: Sony Tablet S, Medion Lifetab)
G) Google Glass Mode (thx Saurik for the ab file)
x) Unroot
Make a choice: 4
Please connect Xperia device with enabled USB-Debugging now to your Computer
Going to copy over some files ...
33 KB/s (442 bytes in 0.012s)
33 KB/s (170 bytes in 0.004s)
13 KB/s (57 bytes in 0.003s)
Starting restore operation, please look on your device and confirm restore!
after that press anykey here in the console
Now unlock your device and confirm the restore operation.
Press any key to continue . . .
After restore is confirmed please look on your device and choose "Service Tests -> Display" in Service menu and WAIT THERE!"
Starting: Intent { act=android.intent.action.MAIN cmp=com.sonyericsson.android.servicemenu/.ServiceMainMenu }
/data/local/tmp/onload.sh ...
Then if I try option 1 instead I get this (although I do not think this is the correct option anyways:
Device type:
0) New Z2 Root Method by cubeandcube (thanks man!)
1) 2014 root (thx jcase for nice pwn binary and xsacha for the exploit)
2) Xperia Root by cubeundcube
3) New Standard-Root (thx Ariel Berkman)
4) New Xperia Root by Goroh_kun (Xperia Z, Xperia V [JellyBean] ...)
5) Old
6) Old-Special (for example: Sony Tablet S, Medion Lifetab)
G) Google Glass Mode (thx Saurik for the ab file)
x) Unroot
Make a choice: 1
Exploit type:
0) xsacha Z2 Tablet Root
1) jcase Z1S Root (make sure to download the pwn binary first from XDA thread!)
Make a choice: 1
Please connect your device with enabled USB-Debugging ...
Copy needed files ...
4106 KB/s (574722 bytes in 0.136s)
6023 KB/s (104576 bytes in 0.016s)
5317 KB/s (2139595 bytes in 0.392s)
72 KB/s (148 bytes in 0.001s)
1024 KB/s (2092 bytes in 0.001s)
4525 KB/s (1109128 bytes in 0.239s)
Beaups and jcase were here
donations may go here, pleaes say what it was for -> [email protected]
Rebooting device, please wait ...
mount: Permission denied
dd: /system/xbin/su: Read-only file system
chown: /system/xbin/su: No such file or directory
Unable to open /system/xbin/su: No such file or directory
ln: /system/bin/su: Read-only file system
dd: /system/app/Superuser.apk: Read-only file system
chown: /system/app/Superuser.apk: No such file or directory
Unable to open /system/app/Superuser.apk: No such file or directory
dd: /system/xbin/busybox: Read-only file system
chown: /system/xbin/busybox: No such file or directory
Unable to open /system/xbin/busybox: No such file or directory
/data/local/tmp/install_tool.sh[39]: /system/xbin/busybox: not found
mount: Permission denied
"If this helped you please consider donating to the original author jcase: http://forum.xda-developers.com/showpost.php?p=53407127&postcount=1004"
You can close all open command-prompts now!
After reboot all is done! Have fun!
Bin4ry
Press any key to continue . . .
Any ideas on what I am doing wrong or what I need to do differently?
I have rooted my phones before and installed different ROMs but something seems to be off here.
cward0625 said:
Thanks for the response, I had referred to this guide too but was unable to get this step to work for me->
Any ideas on what I am doing wrong or what I need to do differently?
I have rooted my phones before and installed different ROMs but something seems to be off here.
Click to expand...
Click to collapse
forget about root. To install TWRP to FOTA or custom ROM, you don't need it.
Proceed with step 7.
Rootk1t said:
forget about root. To install TWRP to FOTA or custom ROM, you don't need it.
Proceed with step 7.
Click to expand...
Click to collapse
thanks a lot, I did that, got lineage installed, worked fine, then when I followed the directions to install gapps and rebooted it just keeps loading twrp and not to lineage. I tried wiping and starting over and getting the same thing. Is there something I need to do differently? I used gapps arm 7.1 neon 20181118
thanks again
cward0625 said:
thanks a lot, I did that, got lineage installed, worked fine, then when I followed the directions to install gapps and rebooted it just keeps loading twrp and not to lineage. I tried wiping and starting over and getting the same thing. Is there something I need to do differently? I used gapps arm 7.1 neon 20181118
thanks again
Click to expand...
Click to collapse
wiping and installing 14.1 did not work, but when i did 15.1 it did. I think I should be set now.
Thanks