[Q] Help plz!!! - G Tablet Q&A, Help & Troubleshooting

help ! i've installed clockworkmod recovery v8 on my gtablet by following the instructions of copying it to the root of internal memory and then power up with volume up to start stock recovery then chose update.zip , after i did that the tabtlet showed the installation box then the tabtlet booted .. the thing is when i start the recovery mod now nothing loads and the screen stops at the 3 birds screen and doesnt go forward ( only when i start recovery mod , normal mod works normally and i can use my tablet) ,,
i've heard something about that view sonic is has used a new bootloader version 1.2 or something and it locks anything that get installed over the stock versions ,,,i've bought the tabtlet recently since 2 monthes ,, exactly i've purchased it from amazon on the mid of june,, so i thought maybe my tabtlet has this new loader
is there anyway to fix the problem or even to go back to the stock loader??
thank you ...

http://viewsonic-gtablet-for-dummies.webs.com/

Related

[Q] How to unlock P7500 Bootloader

Hi there..
Just want to ask, last time My P7500 (10.1/3G) is REPAIRED (Replace LCD & Mainboard) @ Samsung Service Center before that i use a few custom kernel plus install CWM but after REPAIRED i saw somethng strange on "Samsung Galaxy Tab Boot Logo" the something like a KEY @ @ the bottom "Samsung Galaxy Tab Boot Logo" at first i think it's normal cause i doesn't to root or isntall cutom rom yet but when the time i want to root or even install CWM the progress is OK but when i ENTERING CWM menu the screen suddenly is RUNNING UP SIDE DOWN so FAST so i cannot see the screen normaly but i still try to root & install custom rom on my Gtab & DONE...!! but when it's Boot the screen is far than normal it split into two screen & sometimes it running up side down again like on CWM menu does anyone know what happen to my Gtab P7500...?? is it cause My Bootloader is Locked by Samsung & how to Unlock it cause i cannot ask "them" about this condition cause it happen just when i try to root & install custom rom and when entering cwm menu but when i flash official rom from random release ALL is BACK to NORMAL & nothing stange happen to my P7500
Please advise..
Regard's
soomat said:
Hi there..
Just want to ask, last time My P7500 (10.1/3G) is REPAIRED (Replace LCD & Mainboard) @ Samsung Service Center before that i use a few custom kernel plus install CWM but after REPAIRED i saw somethng strange on "Samsung Galaxy Tab Boot Logo" the something like a KEY @ @ the bottom "Samsung Galaxy Tab Boot Logo" at first i think it's normal cause i doesn't to root or isntall cutom rom yet but when the time i want to root or even install CWM the progress is OK but when i ENTERING CWM menu the screen suddenly is RUNNING UP SIDE DOWN so FAST so i cannot see the screen normaly but i still try to root & install custom rom on my Gtab & DONE...!! but when it's Boot the screen is far than normal it split into two screen & sometimes it running up side down again like on CWM menu does anyone know what happen to my Gtab P7500...?? is it cause My Bootloader is Locked by Samsung & how to Unlock it cause i cannot ask "them" about this condition cause it happen just when i try to root & install custom rom and when entering cwm menu but when i flash official rom from random release ALL is BACK to NORMAL & nothing stange happen to my P7500
Please advise..
Regard's
Click to expand...
Click to collapse
Anyone can help me about this...??
cause right now i still cannot do anything with my p7500 ..
Thanks
Have you tried this?
http://forum.xda-developers.com/showthread.php?t=1555984
Sent from my GT-N7000 using Tapatalk 2

[Q] [Help me] T110 Bricked (samsung tab 3 lite)

(I'm new to xda forums. So if i do something wrong tell me!)
Hey guys. I'm tom and i have a big problem!
I got home from school today and thought about my rooted tablet. I had cwm on it so i wanted to boot in it with rom manager. Once there i was looking at some things here and there because i had a problem with otg (if this problem is over please help me with that one ;D)
But once i was clear looking through the recovery i selected reboot system to go back. First the t110 samsung thingy came on the screen. But then the screen faded black and 30 seconds later my recovery came back again. This went on and on. Even when selecting turn off in advanced. After taking a break because i downloaded a stock kernel to install i tried again. But then it became even crazier. I can't boot at all, everything is black I can only boot in odin mode. So. Can someone please help me with my bricked tablet. I only have for like 1 month!
P.S Yes. I'm to dump to make a backup (Stupid me )
Edit: I can boot again in cwm! My sd card was out....
Edit: And i can't boot in cwm. Even with sd card in

[BRICKED] Need help!! Alcatel One Touch S'Pop (4030x)

Hi guys, new to the forum, but been reading for a while now.
I need some help with my gf's device which i got messed.. So here is the problem:
Device: Alcatel One Touch S'Pop (4030x)
Carrier: Globul(Bulgarian)
Root: YES
SU Status: Installed SuperSU
Stock firmware: latest ver of Android JB 4030x modded for globul
Recovery: Selfmade CWM.
So the problem is that the device was stock and sim locked by carrier globul, what i was trying to do is root inastall cust recovery and install new rom, hoping that this will debloat the device and eventualy sim unlock it, now i am stuck with a white screen every time i try to boot it, juat after the first boot animation. Tried to go to recovery - work flawlessly. Tried re-installing the custom ROM several times with no luck.. Here is what i done:
Rooted with VRoot, then installed CWM recovery via MTK Droid Root & Tools, all worked fine, the stock (rooted) ROM booted with no problems at all (restarted couple o times)
Then i downloaded to my SD the last version of GE-Rom from MXDevelopers blog and tried to flash it via recovery, following their guide(only difference that i used CWM instead of TWRP) everything went well and nice, then i pressed "Reboot device now" option in the recovery and it rebooted, shown the 1st bootlogo and than that white screen (ofdeath) and it doesn't do anything except when i press volume down and hold it, it vibrates as when you switch silent mode on with the vol keys, also i noticed that the power button works as supposed (locks unlocks).
What i need to do is getting a custom rom working on the device, or at least a stock (non globul) rom working on it..
I tried to flash thru recovery the X9 ROM in hope it will do the job but null... I tried several times to install and re install the rom with no succes so far. What i am thinking is that i somehow damaged the boot image ( i havent touched it but i dont know if the custom rom had tried to modify it. )
Please help!!
Will click the thanks button, i promise
If anything in the given information is unclear, just ask and i will clear it for you, or in case i haven't given enough info on something..
C'mon guys.. Why nobody posting ? I followed the help request guide, i made clear what the problem is and i've given all the information that is avail. ...
I mean.. Please help, any help, advice or whatever will be highly apreciated.. You see, i'm new here but if there is something i can help with - then i will do it.. I know that some devs here do have got that model of alcatel..
I had a very similar problem to yours and
Only resolved it today. Go into XDA and search
Bricked Alcatel 4030. Wergi1 has the solution
Well it worked for me good luck.

[q] gti8262 > phone doesn't start

Hi XDA members, I came here because I'm tired and I cant'd do anything more, I need help
Ok so first I had a Samsung Galaxy Core Duos GTI8262, original, no modified, android 4.1.2, everything all right.
Then I starded to try to install a costum ROM with 4.4. I rooted it, and then I found a CMW Recovery and I had installed it via Odin307, but it didn't work because it was not compatible with my phone, it was crashing all the time and the phone used to make noises, like an engine working or something, and then it shuts down. Then after much search I found here in XDA a costum Recovery Based in CMW for my phone, "CMW based Recovery v6.0.4.7".
I installed it via Odin307 under the previous CMW that dint work properly, and finally everething went all right, I installed a ROM with KitCat, then another with Lillicop, etc... then I wanted to try Cynogen, it was in my model devolopment and I installed it, bigger mistake, it didn't recognize SIM card such as Wifi, Bluethoth, etc... no conections. I get tired because with all my Download mode started to get stuck, so, I could not install another ROM, so, angry, I went to based CMW Recovery and I formatted EVERYTHING, until get to the point where there wasn't ANY file in SDCARD0, I tried to make factory Reset, didn't work, so I turn the phone On and the logo "Galaxy Core Duos GTI8262" stays there forever... the phone doesn't start.
THEEN... i downloaded the stock ROM here in XDA to my model (I'm Portuguese (Portugal)), and tried to install it via Odin207. I was waiting that the Download Mode got stucked again but I tried it in the same way, because I didn't knew what to do more. BUT, instead of get stuck, the Download Mode only stays for aprox. 5 seconds, then the phone shuts down... SO > nothing in SDCARD0 (and the CWM Based doesn't have the option to install anything in extSDCard I dont know why...) and Download Mode crashes... without pay nothing, WHAT CAN I DO PEOPLE? :crying:
Please help, sorry my English...
Duarte T.

[q] [help] gti8262 > phone doesn't start

Hi XDA members, I came here because I'm tired and I cant'd do anything more, I need help
Ok so first I had a Samsung Galaxy Core Duos GTI8262, original, no modified, android 4.1.2, everything all right.
Then I starded to try to install a costum ROM with 4.4. I rooted it, and then I found a CMW Recovery and I had installed it via Odin307, but it didn't work because it was not compatible with my phone, it was crashing all the time and the phone used to make noises, like an engine working or something, and then it shuts down. Then after much search I found here in XDA a costum Recovery Based in CMW for my phone, "CMW based Recovery v6.0.4.7".
I installed it via Odin307 under the previous CMW that dint work properly, and finally everething went all right, I installed a ROM with KitCat, then another with Lillicop, etc... then I wanted to try Cynogen, it was in my model devolopment and I installed it, bigger mistake, it didn't recognize SIM card such as Wifi, Bluethoth, etc... no conections. I get tired because with all my Download mode started to get stuck, so, I could not install another ROM, so, angry, I went to based CMW Recovery and I formatted EVERYTHING, until get to the point where there wasn't ANY file in SDCARD0, I tried to make factory Reset, didn't work, so I turn the phone On and the logo "Galaxy Core Duos GTI8262" stays there forever... the phone doesn't start.
THEEN... i downloaded the stock ROM here in XDA to my model (I'm Portuguese (Portugal)), and tried to install it via Odin207. I was waiting that the Download Mode got stucked again but I tried it in the same way, because I didn't knew what to do more. BUT, instead of get stuck, the Download Mode only stays for aprox. 5 seconds, then the phone shuts down... SO > nothing in SDCARD0 (and the CWM Based doesn't have the option to install anything in extSDCard I dont know why...) and Download Mode crashes... without pay nothing, WHAT CAN I DO PEOPLE?
Please help, sorry my English...
Duarte T.

Categories

Resources