Related
Just bought this for (what I think) was a really good deal... then noticed after I bought it that the power cable is proprietary... (ugh)...
I was hoping to get some sort of battery pack for this in case it goes dead on a trip, anyone know of one that would work? OR even better, is there an adapter to charge the tablet S off of usb somehow?
... I'm hoping I didn't just get buyers remorse....
The AC adapter is two pieces. The cable with the prongs, then the little box with the cable that goes to the tablet. I bet you can find a cable that has a cigarette adapter instead of prongs. If thou find one, link me, I would be interested.
Sent from my Sony Tablet S
Why don't you just get something like THIS and save yourself a lot of headache. Plus you can use it with all of your devices! I've had one for a few years now and it's a must have!
Won't 75w be too little? I think it will be less than 1 amp the charger requires. Maybe i m wrong in my calcs on this
Sent from my R800i
No, you're probably right. I don't think iPads can charge via car chargers either now that I think about it, but I've used to to power laptops and charge cell phones. I haven't tried mine yet with the tablet s but maybe I shall soon.
annoying
anakinjay said:
Just bought this for (what I think) was a really good deal... then noticed after I bought it that the power cable is proprietary... (ugh)...
I was hoping to get some sort of battery pack for this in case it goes dead on a trip, anyone know of one that would work? OR even better, is there an adapter to charge the tablet S off of usb somehow?
... I'm hoping I didn't just get buyers remorse....
Click to expand...
Click to collapse
The only thing I don't like so far is the crazy plug. Why does Sony have to be different than everyone else?
Gonna make a trip to Fry's Electronics and see what they have.
would this 150w one work? http://www.amazon.com/BESTEK-inverter-converter-blackberry-MRI1511U-4/dp/B003SGJIRO/ref=pd_vtp_e_2. I'm not sure about how the wattage works with car chargers so please let me know if the cars battery can only produce a certain max output.
puredreamz said:
would this 150w one work? http://www.amazon.com/BESTEK-inverter-converter-blackberry-MRI1511U-4/dp/B003SGJIRO/ref=pd_vtp_e_2. I'm not sure about how the wattage works with car chargers so please let me know if the cars battery can only produce a certain max output.
Click to expand...
Click to collapse
I think wattage works as multiplication of voltage times amp. I don't have the charger here, but if you divide 150 watt by whatever voltage your converter produces you get the amps. I.e. Assuming 100-110v you get up to 1.5amp, or assuming 220v you get up to almost 700mAmp. I think sony charger requires 1amp but im not sure for what voltage they quote it. Hope it helps
Sent from my R800i
Can someone recommend a really good external battery charger?
sent from my Evo 4g LTE
I am willing to spend up to 50
sent from my Evo 4g LTE
Do you have an accessory discount with Verizon? If so, the 6000mAh HTC battery pack is $52.
geoff5093 said:
Do you have an accessory discount with Verizon? If so, the 6000mAh HTC battery pack is $52.
Click to expand...
Click to collapse
No just get another phone with a bigger battery or removable battery. Or buy two DNA's, 2 phones would take up less space. When one phone dies turn the other one on.:silly:
geoff5093 said:
Do you have an accessory discount with Verizon? If so, the 6000mAh HTC battery pack is $52.
Click to expand...
Click to collapse
i havent been able to find that one. would you be so kinda as to post a link?
treadwayj said:
i havent been able to find that one. would you be so kinda as to post a link?
Click to expand...
Click to collapse
http://www.verizonwireless.com/b2c/...ypeId=13487&accessoryId=52132&initialPhoneId=
It's $69.99, but I get 25% off Verizon accessories because of my discount.
thetunicakid said:
Can someone recommend a really good external battery charger?
sent from my Evo 4g LTE
Click to expand...
Click to collapse
While I haven't purchased it myself (highly considering it though, will need to do more research), this seems fairly interesting.
http://www.newtrent.com/store/ipad-external-battery/icarrier.html
Here's a "review" that I watched/learned about its existence. Doesn't help much... anyone care to explain which port we would use to charge the DNA? The 2A or the 1A?
http://www.youtube.com/watch?v=xKg0smUz0L4&feature=youtube_gdata
I don't remember where I saw someone post this.. but credit goes to them!
binsleepin said:
While I haven't purchased it myself (highly considering it though, will need to do more research), this seems fairly interesting.
http://www.newtrent.com/store/ipad-external-battery/icarrier.html
Here's a "review" that I watched/learned about its existence. Doesn't help much... anyone care to explain which port we would use to charge the DNA? The 2A or the 1A?
http://www.youtube.com/watch?v=xKg0smUz0L4&feature=youtube_gdata
I don't remember where I saw someone post this.. but credit goes to them!
Click to expand...
Click to collapse
It really doesn't matter which port, I don't believe the DNA uses more than an amp to charge, but you can't damage it by using the 2A port.
This is correct! The phone decides how much charge to pull preventing incorrect chargers from damaging
Sent from my Galaxy Nexus using Tapatalk 2
I did some searching on Amazon and found this, not bad for $30!
http://www.amazon.com/New-Trent-IMP52D-Thunderbolt-Blackberry/dp/B0013G8PTS/ref=cm_cr_pr_product_top
binsleepin said:
While I haven't purchased it myself (highly considering it though, will need to do more research), this seems fairly interesting.
http://www.newtrent.com/store/ipad-external-battery/icarrier.html
Here's a "review" that I watched/learned about its existence. Doesn't help much... anyone care to explain which port we would use to charge the DNA? The 2A or the 1A?
http://www.youtube.com/watch?v=xKg0smUz0L4&feature=youtube_gdata
I don't remember where I saw someone post this.. but credit goes to them!
Click to expand...
Click to collapse
use the 1 amp. When using car chargers that have 1 and 2 amp choices, my phones have always charged @ 500mah on the 2 amp side but 1 amp on the 1 amp side. I think its to protect the phone. There are battery apps that will tell you how much charge the phone is getting.
http://www.amazon.com/5600mAh-Exter...d=1353451168&sr=8-2&keywords=external+battery
I use the 5600mA version (though only has a charge rate of 500mAh, but the biggest one can even charge a laptop and it goes for less than $45, the smallest one is about the size of two fingers put together and the largest one about the size of a 2nd phone (though probably a bit thicker) and has a 3Ah max charging speed
edit: i was looking at the 10000 mA version and it seems that the astro3E doesn't have the laptop charging, but i found the regular one (astro3) that does have the output for laptops, but is also selling for $60.
What about MintyBoost? I'm planning to make a few. The main feature is that it works with standard AA batteries (or AAA or whatever gives it from 1.5 to 4.5 volts or so, rechargeable or not it's not picky about source) and you can hot-swap them in the field with fresh or even cannibalized ones (you can easily "increase" the amount of power you carry with you without buying another expensive charger by just having a stash of cheap rechargeable AA).
Anyone tried? Any bad things about it?
I just got the EasyAcc 12000mAh one from Amazon for $40 and I highly recommend it. 12,000 mAh so roughly 5 full charges for the DNA. I'd post a link but I'm new.
I've got the Motorola P4000 from VZW. It's nearly perfect. The form factor is exactly what I want...very very thin. It also has a built in MicroUSB cable, which tucks nicely into the lip around the unit. Both of these are features I wanted. It also accepts a USB cable to use a separate cable if you prefer, but the integrated cable is huge to me. It's recognized as a 1A AC charger and charges fast.
There's just one fairly big problem though. If I'm in certain areas, presumably where signal is a bit iffy, it'll kill my signal when I plug it in with the integrated cable. Interestingly it seems not to do that if I use a separate cable -- even if the phone and the charger are in the exact same spot as when I used the integrated cable. So it seems like there may be some kind of interference that isn't being shielded with the built in cable. It's a big issue, but I haven't yet found another device with the form factor, integrated cable, and 1A charging. And in most places, it doesn't happen. I just have to keep an eye on it if I'm using it and expecting a call.
One of the things I was really excited about with the Lumia 920 was the built in wireless charging feature. Since the Nokia charging plate was selling for about 70 bucks (ouch) I decided to see what alternatives were available. I've tried two different wireless chargers so far with mixed results:
LG Electronics WCP-700 - This charger works great and I was able to snag it from amazon for 35 bucks shipped. If you want wireless charging but don't want to pay 70 bucks for one charger, then I highly suggest this model. You can get 2 for the price of one Nokia Charger.
Powermat 2x - I was hoping the community could give me some advice on the powermat. Naturally if you plug the powercube into the phone, it will charge just fine. BUT I noticed that if you put a charging plate on the charger and then put the 920 on top of it, the 920 will begin to go into charging mode, although when i tried doing that, it didn't really seem to be charging at any noticeable rate( I may have been taking the phone off the charger too frequently though). Does anyone know exactly what voltage and amperage the powermat wirelessly charges at? My concern is that the volts or amps will be off and damage could be done to the battery in my lumia 920. Any thoughts?
Good questions! I was wondering the same thing about the different mats out there.
What about the Energizer one?
Also, the LG one apparently beeps a lot...does it do so with the Nokia? When it finishes charging it turns off and lets the phone run off battery for a bit, then turns back on to top it off again, causing it to beep each time it turns on throughout the night. Have you noticed this?
LudoGris said:
Good questions! I was wondering the same thing about the different mats out there.
What about the Energizer one?
Also, the LG one apparently beeps a lot...does it do so with the Nokia? When it finishes charging it turns off and lets the phone run off battery for a bit, then turns back on to top it off again, causing it to beep each time it turns on throughout the night. Have you noticed this?
Click to expand...
Click to collapse
From what I've read, the Energizer QI chargers will work fine with the 920, I just didn't get one since the LG model was a bit cheaper. The LG one does beep, although I haven't found it to be too much of an issue. When I place the phone on the charger, the LG mat will beep and show the green charging icon, and my phone will make the connection noise. I also think the mat will beep occasionally when the phone is charged, since it lets the battery drain a bit, then starts charging again, although last night it didn't wake me up at all while I slept. You could probably remove the speaker from the LG pad fairly easily, although from my experience, it's not bothersome enough to be worth the trouble.
beebop483 said:
One of the things I was really excited about with the Lumia 920 was the built in wireless charging feature. Since the Nokia charging plate was selling for about 70 bucks (ouch) I decided to see what alternatives were available. I've tried two different wireless chargers so far with mixed results:
LG Electronics WCP-700 - This charger works great and I was able to snag it from amazon for 35 bucks shipped. If you want wireless charging but don't want to pay 70 bucks for one charger, then I highly suggest this model. You can get 2 for the price of one Nokia Charger.
Powermat 2x - I was hoping the community could give me some advice on the powermat. Naturally if you plug the powercube into the phone, it will charge just fine. BUT I noticed that if you put a charging plate on the charger and then put the 920 on top of it, the 920 will begin to go into charging mode, although when i tried doing that, it didn't really seem to be charging at any noticeable rate( I may have been taking the phone off the charger too frequently though). Does anyone know exactly what voltage and amperage the powermat wirelessly charges at? My concern is that the volts or amps will be off and damage could be done to the battery in my lumia 920. Any thoughts?
Click to expand...
Click to collapse
Doesn't the PowerMat use a different wireless charging standard? I thought I read somewhere it wasn't the QI standard.
PowerMat is its own standard.
Not sure where you are, but the plate is $50 and the stand is $70 here.
Might want to try mail-order?
As for other plates, I have a few lying around, but I don't want to risk my phone trying them without knowing. I have 2 plates and a stand, so I am pretty covered.
Philips DLP7210B/10 also works with the Lumia 920.
I ordered a Palm Touchstone off Amazon for $6 and free shipping. I'll know in a few days when it gets here if it works or not, but I read somewhere that it should.
Sorry to disappoint you, but the Touchstone does not work. It makes the charging notification sound, but the battery still drains; it doesn't charge at all.
I have the Maxell Airvolt QI charger. It works but the phone seems to get warm unlike the Fatboy charger I use at night.
jhoff80 said:
Sorry to disappoint you, but the Touchstone does not work. It makes the charging notification sound, but the battery still drains; it doesn't charge at all.
Click to expand...
Click to collapse
Doh!
I really hope someone makes a 12v charging pad to keep in your car. Plug into the cig lighter and lay the phone on the "pad" somewhere in the car. I know the new dodge cars have it as an option now.
john94si said:
I really hope someone makes a 12v charging pad to keep in your car. Plug into the cig lighter and lay the phone on the "pad" somewhere in the car. I know the new dodge cars have it as an option now.
Click to expand...
Click to collapse
There's no reason why a 12v adaptor of sufficient ampage wouldn't work. Just match up the plug and polarity to the DC adaptor that comes with the charging pad.
But obviously a QI charger is not designed for use in a car. QI only recently release their guidelines:
http://www.wirelesspowerconsortium....ermarket-chargers-v-10.pdf?force-download=yes
It seems there are two current wireless charging standards: QI and PMA
Powermat are PMA, and this is a copyrighted licensed standard, i.e., Powermat will get revenue/license on each device. There is a limited trial in Starbucks.
QI is open, and I think a "free" standard. They have public charging spots in Japan, and Japanese handsets are predominantly QI
This is all just what I've recently read, so I'm not an expert or utterly certain it is correct, but it does seem that Nokia 920's are to the QI standard, and so any QI charging plate should work...?
gilesjuk said:
There's no reason why a 12v adaptor of sufficient ampage wouldn't work. Just match up the plug and polarity to the DC adaptor that comes with the charging pad.
But obviously a QI charger is not designed for use in a car. QI only recently release their guidelines:
Click to expand...
Click to collapse
I personally plan to do just this. I figure a Qi compatible charger hard wired into the car, then find a good place to mount it with a thin grip pad covering it. It should work just fine.
SuperSport said:
I personally plan to do just this. I figure a Qi compatible charger hard wired into the car, then find a good place to mount it with a thin grip pad covering it. It should work just fine.
Click to expand...
Click to collapse
Make sure you post pictures when you do this.
Sent from my RM-820_nam_att_100 using Board Express
SuperSport said:
I personally plan to do just this. I figure a Qi compatible charger hard wired into the car, then find a good place to mount it with a thin grip pad covering it. It should work just fine.
Click to expand...
Click to collapse
Ooooo, my Edge has a little 'shelf' under the console that has a ribbed rubber bottom. And it has a 12v plug right beside it. I bet my husband (the engineer) might be able to wire up a charging plate. He would need to shorten the cord so it wouldn't flop around. But he's very good at that sort of thing.
This is a great idea! He works overseas but I think I have a new 'honey-do' for him on his next R&R. Thanks!
beebop483 said:
Any thoughts?
Click to expand...
Click to collapse
Anything that is a Qi charger should work, it's a standard.
http://en.wikipedia.org/wiki/Qi_(inductive_power_standard)
I have an Everyready Qi charger, the 920 and it are happy as clams together.
schettj said:
Anything that is a Qi charger should work, it's a standard.
http://en.wikipedia.org/wiki/Qi_(inductive_power_standard)
I have an Everyready Qi charger, the 920 and it are happy as clams together.
Click to expand...
Click to collapse
Nice! I'll get one too!
tabletop charging
I personally think it would be awesome to be able to integrate QI wireless charging into a tabletop. think about it, when you sit down at a table for dinner, you usually take your phone out of your pocket, right? what if you could charge it while you eat? why doesn't starbucks do this?:highfive:
Has anyone purchased/used one yet? I am looking at getting one, but haven't yet, mostly because I haven't found one that I am sold on. Thanks
I've got two different ones that I've tried now and neither of them keep the phone charging, but the battery will usually stay at the same amount. They charged my Nexus 5 pretty well even under hard use while driving.
RED ZMAN said:
I've got two different ones that I've tried now and neither of them keep the phone charging, but the battery will usually stay at the same amount. They charged my Nexus 5 pretty well even under hard use while driving.
Click to expand...
Click to collapse
I'm having the same issue. Which chargers did you try? Mine is this one
Weird, because my Tylt Vu works just fine with it.
Also interested in seeing what people are finding useful.
I'm looking to buy one soon, and this is the one I have my eyes on now. http://www.amazon.com/CHOETECH-Wireless-Charging-Blackberry-included/dp/B00JA7HNZO
3 Coil Charger and plenty of good reviews
AB_ said:
Also interested in seeing what people are finding useful.
I'm looking to buy one soon, and this is the one I have my eyes on now. http://www.amazon.com/CHOETECH-Wireless-Charging-Blackberry-included/dp/B00JA7HNZO
3 Coil Charger and plenty of good reviews
Click to expand...
Click to collapse
The one you've linked to isn't a car charger..?
Varming said:
The one you've linked to isn't a car charger..?
Click to expand...
Click to collapse
I don't know how I missed everything about this thread.
It's not a car charger, I'll take a seat and just watch. My mistake. Long day at work.
InsaneJester17 said:
I'm having the same issue. Which chargers did you try? Mine is this one
Weird, because my Tylt Vu works just fine with it.
Click to expand...
Click to collapse
Funny enough, one of them is the same one you just posted, just a different brand name. Worked good for my Nexus 5, but my LG G3 usually just stays at the current level when I put it on there with Ingress or Waze plus BT Streaming going on. If it is hot out it loses charge slowly.
Here's the other one.
www.amazon.com/dp/B00INRZVF6/
Grips MUCH better, and is a really nice mount. 3 coil also, but not enough juice to do better than the other one. I've tried multiple 2.1A usb chargers too.
RED ZMAN said:
Funny enough, one of them is the same one you just posted, just a different brand name. Worked good for my Nexus 5, but my LG G3 usually just stays at the current level when I put it on there with Ingress or Waze plus BT Streaming going on. If it is hot out it loses charge slowly.
Here's the other one.
www.amazon.com/dp/B00INRZVF6/
Grips MUCH better, and is a really nice mount. 3 coil also, but not enough juice to do better than the other one. I've tried multiple 2.1A usb chargers too.
Click to expand...
Click to collapse
Good to know. I almost bought the one you have hoping it would solve my issue. Back to the drawing board I suppose.
RED ZMAN said:
Funny enough, one of them is the same one you just posted, just a different brand name. Worked good for my Nexus 5, but my LG G3 usually just stays at the current level when I put it on there with Ingress or Waze plus BT Streaming going on. If it is hot out it loses charge slowly.
Here's the other one.
www.amazon.com/dp/B00INRZVF6/
Grips MUCH better, and is a really nice mount. 3 coil also, but not enough juice to do better than the other one. I've tried multiple 2.1A usb chargers too.
Click to expand...
Click to collapse
Does your DigiYes consistently charge your phone? I have one of the DigiYes models, but I'm finding it frequently stops charging, often within seconds of beginning charging, though sometimes it lasts a few minutes before giving up. I always get the "Wireless Charging" message on the display, never the "slow charging" warning.
I tried swapping their 2.1A cigarette lighter adapter for an Anker 2.4A charger -- same deal. Tried adjusting the vertical position in the charger -- sometimes seems to last a little longer before giving up, but generally doesn't help at all. When it stops charging, the blue light stays on (rather than going back to green).
When it does charge, I seem to get a decent charge current out of it. Very confusing, and probably going to get shipped back.
Edit: it seems to drop out less when charging from wall power, though it still happens -- perhaps correlated with greater power demands on the phone (Google Earth).
I did state above that it charges my phone, but if Navigation and BT Streaming is going on it keeps it at a steady level, or if hot discharges slowly.
If you don't have a 3 coil QI charger, positioning is very important, if it charges and stops, it is a positioning issue for sure.
Changing to a higher amperage charger won't help, as Qi only puts out so much. The new Qi standard coming out should fix this for us though, it transmits 2 amps I think, and has more distance so positioning shouldn't matter AS much.
RED ZMAN said:
I did state above that it charges my phone, but if Navigation and BT Streaming is going on it keeps it at a steady level, or if hot discharges slowly.
If you don't have a 3 coil QI charger, positioning is very important, if it charges and stops, it is a positioning issue for sure.
Changing to a higher amperage charger won't help, as Qi only puts out so much. The new Qi standard coming out should fix this for us though, it transmits 2 amps I think, and has more distance so positioning shouldn't matter AS much.
Click to expand...
Click to collapse
Does the DigiYes disconnect constantly like the one I have? Or no?
Nope.
My other one did, but after adjusting how high it sat with the bottom brace that problem went away.
My air dock keeps the phone at a steady charge while running navigstion, bluetooth (aptx) via stock music app, and 100% brightness. The thermal protection activates eventually and lowers the brightness to 90%, and then it starts to very slowly charge. It charges fast if not running anything.
Also, you don't need 3 charging coils. My powerbot disk style charger easily works without worrying about position. I opened it up and the whole thing (~2.5") is one big coil. The air dock works well too, but I haven't opened it up.
flaring afro said:
My air dock keeps the phone at a steady charge while running navigstion, bluetooth (aptx) via stock music app, and 100% brightness. The thermal protection activates eventually and lowers the brightness to 90%, and then it starts to very slowly charge. It charges fast if not running anything.
Also, you don't need 3 charging coils. My powerbot disk style charger easily works without worrying about position. I opened it up and the whole thing (~2.5") is one big coil. The air dock works well too, but I haven't opened it up.
Click to expand...
Click to collapse
I have two air docks (from the original crowd funding campaign) and neither one of them will hold my G3 (with the included magnets used). How well is your sticking? I wonder if I got an early batch that didn't stick well?
Patrick
preilly44 said:
I have two air docks (from the original crowd funding campaign) and neither one of them will hold my G3 (with the included magnets used). How well is your sticking? I wonder if I got an early batch that didn't stick well?
Patrick
Click to expand...
Click to collapse
It works perfectly fine. Does yours use both magnets and the suction pad? I believe they were separate options in one development point. Also, my car was dusty and it did get some dust on the pad which made it not hold, but wiping it with a damp cloth and letting it dry fixed that issue.
InsaneJester17 said:
Does the DigiYes disconnect constantly like the one I have? Or no?
Click to expand...
Click to collapse
My DigiYes 3 coil frequently disconnects, sometimes in a constant connect-disconnect loop. Other times it holds for a while. It seemed to do better when I put it on a higher amperage charger than it came with, along with the original G3 cable. However this could be coincidence. When it does charge, the charging rate is comparable to any of my desktop qi chargers.
...now available at Fasttech
https://www.fasttech.com/products/1/10061022/9691452-authentic-huawei-cp60-qi-inductive-wireless
No power supply included.
Pantaloonie said:
...now available at Fasttech
https://www.fasttech.com/products/1/10061022/9691452-authentic-huawei-cp60-qi-inductive-wireless
No power supply included.
Click to expand...
Click to collapse
Thanks - but we can use any Qi charging pad right?
kaibosh99 said:
Thanks - but we can use any Qi charging pad right?
Click to expand...
Click to collapse
Yes you can. But only Huawei has the 15w option. Others are limited to 5w-10w. At least I believe that's the case.
I just received my wireless charger yesterday.
I know some alternatives exist, but at least in Canada, 15W Qi charging options are as expensive as this charger was, so I chose the Huawei proprietary tech for the same price.
I am loving this wireless charger. I finally have quick wireless charging, and the pad feels premium.
steadly2004 said:
Yes you can. But only Huawei has the 15w option. Others are limited to 5w-10w. At least I believe that's the case.
Click to expand...
Click to collapse
I'm quite sure Xiaomi has 20w
Well, I ordered one of these from FastTech, and it arrived about a week ago. Amazingly quick shipping considering I bought about a dozen little el cheapo goodies and paid about $2 for the postage. The charging pad is genuine Huawei, in general anything on FastTech that outright claims to be genuine is. It came in a very nondescript tough plastic bag that held a white sealed box. Inside there is a meaningless tiny little pamphlet in Chinese, but why would you need any information anyway? As was mentioned, it doesn't come with a power supply - again, why would it? I crammed my official charging cable into it, works fine. The charging pad is quite a bit smaller than I expected, I guess it doesn't need to be anything more than it is - I would say about 2.75" in diameter and about half an inch thick. The surface is very 'grippy', I wish the TPU case that came with the phone was this sticky. Speaking of which, I throw my phone on the pad with the TPU case and it works fine. In fact, just in the name of science I just tried seeing how thick of material the charger would still work through, and it easily triggers through even 1/8" of paper - so this will work with *any* case that isn't made out of metal.
At first I thought that the placement was *extremely* finicky, because sometimes it seemed like it wouldn't trigger. I've learned since that it just takes a second or two sometimes no matter where you put it, so you just learn to trust it. The phone does have to be somewhat 'centered', but it isn't crazy specific. So, you plop your phone down and the nice green bubbly animation pops up with a pleasant sound, and the icon in the center shows that it is charging via lethal levels of radiation rather than safely through a wire. There is a very small LED under the lip of the pad, that lights up when it is charging. Obviously the LED on the phone will either be green or strobing for a notification while this is going on too. As far as charging speed goes, I haven't done any rigorous testing of any kind but it is most definitely not 'slow'. You put it down, and when you pick it up it has charged up enough that I have never thought "hmm, this is slow". Yeah, I know - real scientific. Oh, and the phone gets 'barely warm' when charging, and I do mean 'barely warm'. This is good, I've heard some combos out there result in a cooking hot phone - and that isn't good for anything.
Otherwise, not much to say. It is very, very nice not to have to plug my phone in - wearing out a charging port is an actual worry, and this way the bottom speaker isn't muffled to nothingness (a strange move, but when you take aggressive hyper efficient space and waterproofing into account it makes sense). One thing to mention, you obviously can't use your phone while it is charging. I mean you *could*, but you won't. If I had to gripe about anything, it is that the pad is a little thicker than I would like. It doesn't hurt anything, but if you have it teetering up on a high spot or something you will need to be a little wary about how you place your phone.
On a side note, not that anyone really 'needs' it in the real world, but don't forget we do have wireless charging in reverse. From reading up on it, the placement between two phones is *extremely* picky, and I would say that if both phones had a case it probably wouldn't work. The other thing they mentioned is that once you initiate a reverse charge, any movement between the two phones of any kind will break the connection - and it is a pain to get going again. Did you know we also have the option to charge something else via the Type C port? It is listed in the settings, I haven't seen that mentioned anywhere. That would be crazy useful - especially since we have SO much battery to spare. Think about it, you could charge wireless earbuds, bluetooth speakers, whatever. No idea at what rate it would charge (theoretically it could be fairly substantial) and of course the kind of cable you would need to do anything with this doesn't really exist... I am going to patch together a Type C to one of those 'multi-pronged charging ends', just to try this out. I have a very neat cable with one end that with one fixed end can fit both Micro-USB and Lightning ports - no one believes me, and honestly I didn't believe it myself at first either. When you eyeball it you think "now why aren't there more of these out there?"
Anyway, for the $20 this charging pad is a no brainer. It is legit, authentic, and works like a charm. One last thing - I swear I can feel the thing radiating from a foot away. I know that is 'impossible' given the inverse square law, but I'm not kidding.
@kaibosh99
Excellent and very helpful review, thank you very much !!!
@kaibosh99
Did the LED and cooling fan switch off automatically when the M20P was fully charged?
So does it show on the screen that it's fast changing?
Sent from my Mate 20 Pro
29 € with power supply included
https://www.amazon.de/gp/product/B07JD35YS6/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1