Related
Hi.
I thought I might start an new tread for my repacks
I have repacked TripNRaVeRs progress to an flash-able ZIPs for xRecovery
All KUDOS goes to J,Z,T!
UPDATE.ZIPs for recovery:
Froyo_2.2.1_xperia_TripNRaVeR-v02.zip
Froyo_2.2.1_xperia_TripNRaVeR-v021.zip
Froyo_2.2.1_xperia_TripNRaVeR-v024.zip
Froyo_2.2.1_xperia_TripNRaVeR-v024.1.zip
NewMarket.zip
Android_2.2.1_Froyo_X10-TripNRaVeR-v040.zip
Froyo_2.2.1_xperia_TripNRaVeR-v0401.1.zip
TripNRaVers original Recovery Backups:
http://rapidshare.com/files/441083539/Android_2.2.1_Froyo_X10-TripNRaVeR-v040.tar.bz2
http://rapidshare.com/files/441186956/Froyo_2.2.1_xperia_TripNRaVeR-v401.tar.bz2
TripNRavers original update.zip for xrecovery.
http://rapidshare.com/files/441499239/Froyo_2.2.1_xperia_TripNRaVeR-v045.zip
(If Z, T or J has any objections I'll take it down)
Trouble shooting same as with Z's Froyo ROM
If you don't have radio (network) or your home is just restarting after 1st boot, please open ADB shell and issue this command:
Code:
killall servicemanager
No wifi connect: Add static IP address or do in adb:
Code:
setprop net.dns1 192.168.1.1
If you don't have root access, please open ADB shell and issue this command:
chmod 4755 /system/bin/su
P.S I hope I don't step on somebodys toes
I'll try to follow TripNRaVeRs progress..
Excellent idea, is the CPU scaling set to 'on demand' or do I need to use setcpu to preserve my battery (the original from J/Z was not set to on demand)
Thanks
I must say runs nice,,,,thou still got market FC and no memory card...
But Top Job
@roRt it's on performance
@lodger try to wipe data before you flash.
Sent from my X10i using XDA App
Full data wipe or cache partition?
Hi there...
So i am a little confused here...
I have tried to install this 3 times now, all 3 times i wiped data before the install.
And still the marked FC on me...
I have also tried to remove all the data in /data/data/xxxxx.vending, and still no luck
Then i have tried to get the vending.apk and replace it, and still FC
So what can be the problem here ??
It is btw the 024 rom i am trying to get running...
hows the camera for pictures? is hd video recording availible?
Sent from my X10i using XDA App
very nice rom!
ballubas said:
hows the camera for pictures? is hd video recording availible?
Sent from my X10i using XDA App
Click to expand...
Click to collapse
+1 Would Like to know tooo! thanks
dk2000zx said:
+1 Would Like to know tooo! thanks
Click to expand...
Click to collapse
+2
Sent from my X10i using Tapatalk
CAMERA IS NOT WORKING!
IT WILL TAKE QUITE A WHILE
SO HOLD ON
thanks :3
Market fix
1.: Take Root Explorer and Delete everything IN the folder "Data/Data/com.android.vending" & "com.android.vending.updater"
(not the folders.. but ALL the stuff they contain)
2.: Download the Vending.apk from http://forum.xda-developers.com/showpost.php?p=10259539&postcount=5874 and save it on your SD Card,
then Take the Root Explorer, and replace the "System/app/vending.apk" with the new one, you have downloaded. Then long press the Vending.apk > Permissions and set them for write, execute etc...
Then Restart the Phone.
It worked for me.
Greets, David
th4r said:
...Installation guide
* Move .ZIP file to SD card
* Reboot your phone, go to RecoveryMenuInstall custom zip
* Wipe data if you're not coming from one of my repacks
Click to expand...
Click to collapse
Just to confirm: is this step still necessary for v024?
Right now I'm with the 2.1 v006 version from J.
Which is the original ROM thread that is being referred to in here?
Could you suggest me on the Installation Procedures? I have the X10 Custom ROM AOSP 2.1 installed currently using XRecovery. How should I be proceeding after this.
I'm using your custom install with xrecovery and I'm getting 100% market F/C
Even tried the method above. Didn't work for me at all
Sighx said:
I'm using your custom install with xrecovery and I'm getting 100% market F/C
Even tried the method above. Didn't work for me at all
Click to expand...
Click to collapse
Same here.
even clean install ? (full wipe, no data restore?)
Sighx said:
I'm using your custom install with xrecovery and I'm getting 100% market F/C
Even tried the method above. Didn't work for me at all
Click to expand...
Click to collapse
I tried the above and it works. I just had to set the permitions for the new vending.apk as the others apps on the same folder manually using root explorer, but it worked after I rebooted.
Yeah, that would be nice!
SHAKEOFABIOMEN said:
Could you suggest me on the Installation Procedures? I have the X10 Custom ROM AOSP 2.1 installed currently using XRecovery. How should I be proceeding after this.
Click to expand...
Click to collapse
Sent from my X10i using XDA App
Very suddenly youtube stopped working on my NC, tried to use astro to uninstall but no joy. The app just shutdown when it goes to launch; any info on a fix is appreciated.
This solution was posted by Bimboy in these forums. My youtube tends to go wacky every once in awhile and this fix works every time.
From the Market, download Titanium Backup (Free in the Market)... You may already have it installed, if so, skip this part.
Open up Titanium Backup, it will likely ask for Superuser permissions. Grant it.
If you get a Busybox error, install Busybox from the Market.
Click on the second tab at the top of Titanium, named 'Backup/Restore', and let it populate all of your apps
Scroll to the bottom of the list and tap the YouTube app
You'll get a dialog box. Click on the 'Wipe Data' button
Just close Titanium Backup, and you're done. YouTube will work, now that you cleared your user data.
Thank you for the info, i appreciate you taking the time to spell it out for me.
The other thing that made YouTube stop working for me was that I added my account in the YouTube app, which was the same one I used to register my NC. Apparently this seems to be an issue. I cleared the data and I am back working again, but I am not going to enter My Channel again.
I used mini info to wipe data... just wanted to add that in case anyone wanted an alternative
I have also noticed that I have to do the TB "wipe data" fix every time the phone boots up. This has been annoying with the random reboots that happen with the NC. Hope there is a permanent fix for this soon.
Does anyone know if there is a way to write a script that could execute this upon every boot?
GarJones27 said:
I have also noticed that I have to do the TB "wipe data" fix every time the phone boots up. This has been annoying with the random reboots that happen with the NC. Hope there is a permanent fix for this soon.
Does anyone know if there is a way to write a script that could execute this upon every boot?
Click to expand...
Click to collapse
Not sure about a script, but "Tasker" should be able to do that for you (from the Market). I don't have this issue, but that would be a pain to deal with as many times as I reboot my NC during the day for testing.
I poached the "fix" portion of the script here to fix youtube... It seemed to work fine. In short, I did this:
Code:
adb shell mount -o rw,remount -t ext2 /dev/block/mmcblk0p5 /system
adb shell busybox rm /data/data/com.google.android.youtube -r
adb reboot
Hope this helps.
360Razir said:
Not sure about a script, but "Tasker" should be able to do that for you (from the Market). I don't have this issue, but that would be a pain to deal with as many times as I reboot my NC during the day for testing.
Click to expand...
Click to collapse
I've asked on a separate thread as well...what if i've deleted youtube. I don't see it in the market which doesn't make much sense that i wouldn't be seeing a general app there.... but how do i dnld it again? Hope i don't have to re root the NC.
i've tried to care about you tube. really.
but i can't.
good luck
you tube is in the market and the .apk is posted here a million times. should be pretty easy to find.
i just wipe the data and start over
I am proud to present you with: Nook Tablet Unrooter One click APP!
By Indirect​​
Information?: Well, the way to best unroot the nook tablet (as it's easy to see if you have done mods to it) is to do a factory system restore, so I decided why not exploit that and make it into an application? Well that's exactly what I did and best of all, it's 1 click (technically 3 but i don't count accepting SU permissions as part of the app). You need to grant SU both times it asks for it to automatically reboot.
Code:
//I take no responsibility what happens with this application or your device and assume that any problem during this process if user fault.
//
Download link?:
http://dl.dropbox.com/u/15069134/Nookunrooter.apk
Instructions?:
Install app, open, click button, grant SU permissions (twice), and let it restore. That's about it.
Warnings?:
You WILL lose ALL data on the tablet except the Sdcard. Be sure to back everything up using titanium backup.
Changelog?:
Code:
1.2: Initial release
Credits?:
Code:
Dodgejcr for his code on github so I just had to change a few things as well as his help in IRC. Thanks man
Myself for rewriting parts of the app to be a one click unroot for the nook tablet
Added the download link meaning it's live! I tested on my device and it worked flawlessly!
Reserved as well
Thanks for this, I have it downloaded as a just in case. Seems much simpler than the 8 or 10 failed boot techniques.
Dumb question, but I am assuming this has been tested on an actual NT?
kes00601 said:
Thanks for this, I have it downloaded as a just in case. Seems much simpler than the 8 or 10 failed boot techniques.
Dumb question, but I am assuming this has been tested on an actual NT?
Click to expand...
Click to collapse
Yeah, tested it on mine last night before release.
This does indeed work although it didn't reboot my Nook Tablet automatically. After I clicked on Unroot Device, it didn't automatically reboot. I tried rebooting it myself and then it began the process of restoring to factory. When it booted back it it was indeed unrooted. Or at least I think it is.
Is there anyway to verify that is truly is unrooted?
kingbobyjr said:
This does indeed work although it didn't reboot my Nook Tablet automatically. After I clicked on Unroot Device, it didn't automatically reboot. I tried rebooting it myself and then it began the process of restoring to factory. When it booted back it it was indeed unrooted. Or at least I think it is.
Is there anyway to verify that is truly is unrooted?
Click to expand...
Click to collapse
Get terminal emulator apk and then type su
if you get permission denied, it's unrooted. I know it's unrooted since I had to re-root.
Edit: The developer and I are working on it.
Updated app to now properly reboot the device.
Indirect said:
Updated app to now properly reboot the device.
Click to expand...
Click to collapse
BAD ASS!
Just outa curiosity are you doing a QF or a FF (quick format or factory format)
Loglud said:
BAD ASS!
Just outa curiosity are you doing a QF or a FF (quick format or factory format)
Click to expand...
Click to collapse
Factory Format.
Video: http://www.youtube.com/watch?v=XBjxZxHoUsY
suicideclown said:
Video: http://www.youtube.com/watch?v=XBjxZxHoUsY
Click to expand...
Click to collapse
I know this is off-topic, but what launcher are you using there?
kes00601 said:
I know this is off-topic, but what launcher are you using there?
Click to expand...
Click to collapse
ADW Launcher. It is what I use on my transformer and phone.
suicideclown said:
ADW Launcher. It is what I use on my transformer and phone.
Click to expand...
Click to collapse
Thanks much. Just happened to see the EX version of ADW.Launcher is 10 cents today, so went ahead and bought it.
kes00601 said:
Thanks much. Just happened to see the EX version of ADW.Launcher is 10 cents today, so went ahead and bought it.
Click to expand...
Click to collapse
Good spotting! Thanks for the tip!
nookabee said:
Good spotting! Thanks for the tip!
Click to expand...
Click to collapse
We are in the 10 days christmas sale for android market. There are a selection of apps each day that are 10 cents each. If you haven't seen that, make sure you take advantage of it. Someone already made a thread about it, but it sounds like you haven't seen it yet.
Guy, stay on topic please
Sent by breaking the sound barrier
minor concern
reverse back to factory stock without a hitch. Got all my paid content back after clicking on them one by one. Good deal.
Just curious though, will registering the same device multiple times raise a red flag with BN?
I press unroot and it just sits there. It does not reboot. I manually shutdown and startup and it does not run the wipe. Any suggestions to full unroot and wipe.
Bmeyer, run adb shell then type
Code:
su
echo -n 0000 /bootdata/BootCnt
reboot
Attached is an updater script zip to flash via recovery. It does not install anything, but rather only delete files. It will free ~30 Mb on your /system partition, while keeping full functionality!
How it works / What it does?
While I was playing with Google Now, I noticed that there exist some (big) files that are actually not needed. These files are used for a new feature in Jellybean - the offline message dictation. However, since most services connected with Google Now require a network connection anyway, you should be fine with removing this functionality.
Overall, deleting the "offline dictation"-specific files will free 30.53 Mb on your system partition! Without any other offside than the fact that you require a network connection for Google Now Voice input. Again: as long as you are connected to a network, you won't notice any difference - everything will just work as before!
Alternatively to the zip, you can - of course - delete the files manually. Therefor, use:
Code:
adb remount
adb shell rm -rf /system/usr/srec/config
adb shell rm /system/usr/srec/en-US/acoustic_model
adb shell rm /system/usr/srec/en-US/clg
adb shell rm /system/usr/srec/en-US/g2p_fst
adb shell rm /system/usr/srec/en-US/offensive_word_normalizer
adb shell rm /system/usr/srec/en-US/rescoring_lm
brilliant..
Works excellently, thanks....Ive been racking my brain as to how I can keep Dalvik on internal and still have Google Now. This should do it!
Thanks for that!
It would be good if you could include an option to install GNow with or without the offline dictation on your gapps aroma installer.
matheusvilela said:
It would be good if you could include an option to install GNow with or without the offline dictation on your gapps aroma installer.
Click to expand...
Click to collapse
Due to some APK updates I will update the installer package anyway - and I will include that option, too.
Does this need to be flashed immediately after a fresh install? I've been using Evervolv's JB for a few days and was hoping I wouldn't have to start fr scratch.
Thanks.
Sent from my Nexus One using xda app-developers app
With this option we can use stock hboot partition ?
My rom just shed 30.. System gone from 210 to 180 on paranoid
npiper05 said:
Does this need to be flashed immediately after a fresh install? I've been using Evervolv's JB for a few days and was hoping I wouldn't have to start fr scratch.
Click to expand...
Click to collapse
This can be flashed any time. However, it will only free space if you have installed Google Now in addition to the ROM.
omegacorp said:
With this option we can use stock hboot partition ?
Click to expand...
Click to collapse
Nope. The JB system itself is still too big for stock hboot.
Drapsthomas said:
My rom just shed 30.. System gone from 210 to 180 on paranoid
Click to expand...
Click to collapse
What do you want to tell us? That it works?
why not just remove /system/usr/srec/en-US/ and leave /system/usr/srec/config then at least you can re-download it which then installs to /data
Tried to move it to sd-ext a creating a link for /system/usr/srec/en-US to /sd-ext/us-EN...
Dunno if it works, but it could 20 megs on system partition is worth trying...
Thanks...
Sent from my GT-P7510 using xda app-developers app
How do I apply it?
Do I flash 260/8/168 hboot, flash rom (final one) then this, and then resize hboot and wipe data?
Go to settings
-about
-BUILD NUMBER ( click on it 7 times) <This will get you into Developer OPtions
-Click on developer options in back in setting menu.
-click on adb debugging (enabled)
Download KINGROOT FROM HERE. (its been mod to work on this watch )
https://www.dropbox.com/s/xh28vtdsevvdjrl/KingRootSetup_105002.exe?dl=0
Once its downloaded to the computer. Open it up. Then connect the watch to computer. Click on root and enjoy your watch.
I am still working on alot more things for us. Where supersu will be a better option for us. I just figure I would open the fluid gate for us.. By dropping this tonight.. Sorry it took so long..
Credit
-ME
-Kingroot
Its awesome to see some development for this watch. Thanks so much for your time and effort.
Sent from my Nexus 6P using Tapatalk
File is not available through the provided link. I would like to test it, to disable ro.ambient.low_bit_enabled in build.prop
Sorry guys. Never used Google drive before. So what I am going to do. Is put link up later on my androidfilehost.com account.. Then problems will be fixed.. Please give me till 830pm eastern time in the states
Guys .. I just updated a link that work now.. Sorry about that. Working long days so. This is a hit and miss. Working on the zw2.
Thx a lot. Is it possibly to activate a cron job vor daily restart at 1 p.m. or something like this? My Zenwatch really needs a reboot once a day
pbaumi said:
Thx a lot. Is it possibly to activate a cron job vor daily restart at 1 p.m. or something like this? My Zenwatch really needs a reboot once a day
Click to expand...
Click to collapse
I would do a factory reset in recovery.. And try that..
blazinandroid1 said:
I would fo a factory reset in recovery.. And try that..
Click to expand...
Click to collapse
I already tried the reset and the battery performance improved. But the watch still works better with daily restarts.
Did you already do some tweaking?
Deleting some preinstalled apps? (resulting in better battery perhaps)
r0tati0n said:
Did you already do some tweaking?
Deleting some preinstalled apps? (resulting in better battery perhaps)
Click to expand...
Click to collapse
I am waiting on the latest update. Then going to make a prerooted system.img with SuperSU and file manager. So you guys can delete whatever you want. Battery life is good. Going to tweak the kernel and get little more out of are devices.
Imagine that: Synapse or Kernel Adiutor on our Watch
Kingroot seems not working for me
It ran all from 0 to 100%, but I cannot delete anything in adb shell.
It seems, it installs an app, but I do not think I have root.
Anyway, Kingroot is only chinese, I cannot read anything.
r0tati0n said:
Kingroot seems not working for me
It ran all from 0 to 100%, but I cannot delete anything in adb shell.
It seems, it installs an app, but I do not think I have root.
Anyway, Kingroot is only chinese, I cannot read anything.
Click to expand...
Click to collapse
Open the app on the watch. Click on red root. That will update root..
There is nothing new on my watch.
At least when I swipe left on the watchface, in the list is nothing new.
r0tati0n said:
There is nothing new on my watch.
At least when I swipe left on the watchface, in the list is nothing new.
Click to expand...
Click to collapse
That's weird. Try to root again. Pay attention to the watch also.
???do you have USB debugging on also
it seems there is a new app in system.
Just found out using adb.
But I cannot see a new app on the watch.
I cannot get adb in root working, should be adb shell adb root or su.
And I cannot uninstall system apps using adb uninstall or pm uninstall.
I wanted to get rid of Jawbone on the watch as a test.
For me it seems this app isnt working.
r0tati0n said:
it seems there is a new app in system.
Just found out using adb.
But I cannot see a new app on the watch.
I cannot get adb in root working, should be adb shell adb root or su.
And I cannot uninstall system apps using adb uninstall or pm uninstall.
I wanted to get rid of Jawbone on the watch as a test.
For me it seems this app isnt working.
Click to expand...
Click to collapse
Don't get rid of jawbone.. People are known to have problems.
Plus I will make a video later for you.
Same problem, KingRoot installs "KRhelper4PC" or (something like that) to my watch but there's nothing to open. ADB is definitely allowed on the watch, it asked for permission to connect to my computer and I set it to "always connect to this device". ADB shell lets me do some basic file exploring on the watch, but su doesn't work.
Are you guys on the latest update. I haven't updated my device yet to see if it works still.
Sent from my ASUS_Z00AD using Xparent BlueTapatalk 2
I am, hopefully they didn't do anything to block root!