Ok i got all of the unlcoking things done....RSD command line stuff...the usuall....but when i try to turn my phone on....im stuck at the "dual core" screen it says unlock up at the top but im nt booting up completly....also the red light flashes the whole time.....someone plz help me before my dad kills me.....
pimp11774 said:
Ok i got all of the unlcoking things done....RSD command line stuff...the usuall....but when i try to turn my phone on....im stuck at the "dual core" screen it says unlock up at the top but im nt booting up completly....also the red light flashes the whole time.....someone plz help me before my dad kills me.....
Click to expand...
Click to collapse
As long as your unlocked, boot into fastboot mode & install RomRacers CWM via fastboot. And then you can boot into android recovery and flash 2.3.4 fruitcake, and should be good to go after that.
Sent from my MB860 using XDA Premium App
Thank you so much dude ur a life saver
Related
i was on 2.3.4 unlocked, flashed back to 1.83 thru rsdlite..when it came back up the att screen went black and the red light is blinking. i cannot get into download, recovery, anything......HELP?!
Flash the unlock sbf. Worked for me.
d3athsd00r said:
Flash the unlock sbf. Worked for me.
Click to expand...
Click to collapse
cant get into download mode..
Even after flashing the unlock sbf, it still gets the blinking red light after the AT&T screen! Help!
macperson123 said:
Even after flashing the unlock sbf, it still gets the blinking red light after the AT&T screen! Help!
Click to expand...
Click to collapse
u should wipe 2.3.4 user data!
start fastboot on ur phone and connect it to pc ,then type this command:
Code:
fastboot -w
Lol now this has be scared to remove 2.3 dont wanna brick my phone.
had the same issue, follow my thread, i fixed the issue. There's a post there I made with designgear's advice on how to get out of a brick via recovery mode.
http://forum.xda-developers.com/showthread.php?p=15137935
I don't even know what kind of title should be for my problem with CWM.
When booting into CWM phone goes in some weird cwm with white letters
PWRReason: PWR_KEY_PRESS then the modes are listed under neath such:
1. RSD
2. FAST BOOT
etc I don't wont to list them all.
I reflashed cwm and now I do have it but first goes into this weird mode then if I choose android recovery goes to real cwm.
How get rid of this weird mod pre-cwm drivng me nuts, any help appreciated.
dito33 said:
I don't even know what kind of title should be for my problem with CWM.
When booting into CWM phone goes in some weird cwm with white letters
PWRReason: PWR_KEY_PRESS then the modes are listed under neath such:
1. RSD
2. FAST BOOT
etc I don't wont to list them all.
I reflashed cwm and now I do have it but first goes into this weird mode then if I choose android recovery goes to real cwm.
How get rid of this weird mod pre-cwm drivng me nuts, any help appreciated.
Click to expand...
Click to collapse
i'm not entirely sure what you are saying or talking about. i just assume you mean when you start in the bootloader you have to navigate to android recovery in that "menu" to go into the recovery? if so. that's normal.
dito33 said:
I don't even know what kind of title should be for my problem with CWM.
When booting into CWM phone goes in some weird cwm with white letters
PWRReason: PWR_KEY_PRESS then the modes are listed under neath such:
1. RSD
2. FAST BOOT
etc I don't wont to list them all.
I reflashed cwm and now I do have it but first goes into this weird mode then if I choose android recovery goes to real cwm.
How get rid of this weird mod pre-cwm drivng me nuts, any help appreciated.
Click to expand...
Click to collapse
Yeah its the bootloader and there is nothing you can do to change it to my knowledge. But most custom roms come with a power button option to 'boot to recovery' so you will very rarely ever have to see it.
Your boot logo, the motorola dual core startup screen, was erased. Flash another boot logo.
Sent from my MB855 using xda premium
hoslayer13 said:
Your boot logo, the motorola dual core startup screen, was erased. Flash another boot logo.
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
Yes, I did erase something when got stock I couldn't go back.
Now when normal power still goes to that screen first then to operating system.
So just flashing boot logo would cure this problem? if any links to that appreciated too, meanwhile I look for one, thnaks.
I did it, thank you hoslayer13, big help and it works.
hoslayer13 said:
Your boot logo, the motorola dual core startup screen, was erased. Flash another boot logo.
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
Gave you a thanks just for your username, it made me laugh
Sent from my Photon 4G via Tapatalk 2
Soooo before the flame begins, yes i was stupid to do this so that is covered. Was curious today and never played with the app in question (chainfire 3D) and installed in my LTE. Little did I know this app doesn't work with ICS (so i read?..). Well I installed the driver that came with it and since after initial shutdown from installation, I can only get to my splash screen. I've tried recovery and fastboot combos and neither pass the splash screen >.< Anyone?
U try running the RUU?
Sent from my EVO using XDA
Was thinking about trying that. Worried this may brick my secure element : S
Edit: tried the RUU (RUU_JEWEL_CL_ICS_40_Sprint_WWE_1.12.651.2_Radio_1.02.11.0423_2_NV_SPCS_2.28_003_release_257970_signed), got an unknown error. Attempted the error recovery method from RUU but was unable to get to the bootloader screen...****.
Gotta do it...
sent from my EVO LTE
See post edit.. : S
naterz said:
Was thinking about trying that. Worried this may brick my secure element : S
Edit: tried the RUU (RUU_JEWEL_CL_ICS_40_Sprint_WWE_1.12.651.2_Radio_1.02.11.0423_2_NV_SPCS_2.28_003_release_257970_signed), got an unknown error. Attempted the error recovery method from RUU but was unable to get to the bootloader screen...****.
Click to expand...
Click to collapse
where did you get the 1.12.651.2
all i can find is 1.12.651.1
shipped-roms.com. I guess i could try the .1 version
when i try to run the .1 ruu, it shows im on 1.12.651.1_R2
Just tried the .1 RUU, got error [155]: UKNOWN ERROR again... gonna try the Recover option thru that..
edit* error 155 again after Recovery option success and RUU reflash :'(
edit* I'm not too familiar with ADB, but do you think I could get to my hboot/bootloader screen through it or perhaps Recovery in general?
naterz said:
Just tried the .1 RUU, got error [155]: UKNOWN ERROR again... gonna try the Recover option thru that..
edit* error 155 again after Recovery option success and RUU reflash :'(
edit* I'm not too familiar with ADB, but do you think I could get to my hboot/bootloader screen through it or perhaps Recovery in general?
Click to expand...
Click to collapse
Navigate to your adb tools folder via terminal and type
adb reboot bootloader
tried adb reboot, error device not found : (
ddeecc
naterz said:
Soooo before the flame begins, yes i was stupid to do this so that is covered. Was curious today and never played with the app in question (chainfire 3D) and installed in my LTE. Little did I know this app doesn't work with ICS (so i read?..). Well I installed the driver that came with it and since after initial shutdown from installation, I can only get to my splash screen. I've tried recovery and fastboot combos and neither pass the splash screen >.< Anyone?
Click to expand...
Click to collapse
But you did get to the splash screen and that's a sign of hope..this phone won't even do that. nothing at all screen dead, everything is dead including bootloader. :\
Shutdown the phone and boot into bootloader.
Option 1) do a factory reset and if it doesn't work then,
Option 2) select fastboot then ran Ruu.
Sent from my HTC One X using xda premium
There is no way to boot into bootloader or fastboot, whether through adb or the key combos :S Adb states device not found and the key combos only give me splash then a lightly lit black screen..
Sent from my PC36100 using XDA
Are you positive about not able to boot into bootloader with key combo? Your phone has to pass bootloader before going to the splash screen.
http://htcevohacks.com/htc-evo-4g-l...tc-evo-4g-lte-unlock-bootloadertwrp-recovery/
So you tried booting as instructed as the above link?
Sent from my HTC One X using xda premium
Ive never really pressed the power button a second time after the initial let-off. I'll give it a shot when I get home, but I'm expecting the same results. Just FYI, I DO see the two Orange bars move on the splash screen (upper right) before it goes blank..
Sent from my PC36100 using XDA
Sounds like a case of the looped boot screen
Sent from my HTC One X using xda premium
UPDATE! Phone was completely drained when i got home...plugged into charger, orange light came on! Was able to enter the bootloader through the key combo and successfully entered my TWRP to do a nand restore. Restore went well and am now running again! Brick fixed by draining battery!
Good to hear:good:. brick was fixed by draining battery :what: then why did you need to do a nand restore? Whatever worked for you
why i said it was fixed via drain was that the charge light finally came on after it died and was plugged in, therefore it allowed me to access bootloader which let me into recovery to restore my backed up clean system files. When the nand restore was completed i was actually able to pass my splash screen! : )
Sorry i did not have the kernel or most information about the phone but ill explain the problem if anyone can help out it'd be a blessing
i have a U.S cellular Motorola electrify running 2.3.5 ( which recently found out was unrom-able)
i got it rooted using one touch method--
Then not thinking -- ( ive rooted and installed roms on other phones never a Motorola) didn't know it needed a unlocked bootloader to function and get roms installed.
i knew i needed a clockworkmod on the phone and i read about the app that boots into clockworkmod bootstrap--apk
did that and it worked--
here is the problem..
didn't install the bootloader.. and tried installing Cyanogenmod10 unofficial rom from photon development forum
rebooted-- got Failed to Start2- starting rsd mode -- if i dont press anything
if i press down it says NV recovery but does nothing
if i press UP it goes into Starting usd recovery ( sorry not exact words not with my phone at the moment)
ive been reading guides.. downing the lock unlock from the bricked guide.. RSD lite would read the phone in the usd recovery
try flashing the offical us cellular back but get an error
wont show up in command prompt
not sure what to do.. please help its hard to function without a phone i hope its not fully bricked
Can you get into fast boot by pressing power and volume-down? If so, you just need to wipe everything using "fastboot -w" and rebooting into RSD mode to flash the uscc sbf.
When you flashed cm10, the kernel is not compatible with the bootloader you're on.
If anyone has the 2.3.5 electrify boot.img, you could probably flash it through fastboot if it'll let you
Sent from my sunfire using xda premium
hoslayer13 said:
Can you get into fast boot by pressing power and volume-down? If so, you just need to wipe everything using "fastboot -w" and rebooting into RSD mode to flash the uscc sbf.
When you flashed cm10, the kernel is not compatible with the bootloader you're on.
If anyone has the 2.3.5 electrify boot.img, you could probably flash it through fastboot if it'll let you
Sent from my sunfire using xda premium
Click to expand...
Click to collapse
Thank you for the reply.. when I press volume down and boot on it says " nv flash mode" then turns off unless hooked in a computer then just stays on that screen
If I press volume up and turn on it says fast boot protocol support and Is half recognized in rsd ITE
If I just power no volume press on it says failed to boot 2 starting RSS mode..
I'm sort of new to everything and need more details.. tryed wiping using fast boot u downloaded but gives error.. same with flashing yes cellular sbf in RSd lite trying all 3 button combos that work
Please I need this phone working.. I messed up someone's phone saying I could put cm10 it for Christmas! Any help would be awesome
Guys plz help me out....
i flashed this ROM on my friends A116 HWv01 SWv16
It was running smoothly until after 1-2 days it hanged and stuck at bootloop, unable to enter recovery ( Mediatek logo came but then it switches off).
I flashed stock ROM but it gave error and was stuck at 41% in green bar.
I tried to reflash it but it gave same error 3149 and this time stuck at 34%.
If i try to boot, it shows canvas logo.
I retried to flash last time but since then it is giving me "BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail" error.
Preloader is intact as it detects A116.
I have succesfully flashed through sp tools before.
I have two stock ROMs both giving same error.
S9201_4.2_MP_F3F8_B1_IN_MMX_09_FLASHER_USER
S9201_MP_F4_B1_IN_MMX_0.16__flasher_user
I think Ram of the device has actually failed... Maybe.. U tried roehosoft ram expander which causes such problems ??
Redownload everything and try again... Go here.. http://forum.xda-developers.com/showthread.php?p=42269382
vsvipul555 said:
I think Ram of the device has actually failed... Maybe.. U tried roehosoft ram expander which causes such problems ??
Click to expand...
Click to collapse
No I didn't use any such app...
$hino said:
Redownload everything and try again... Go here.. http://forum.xda-developers.com/showthread.php?p=42269382
Click to expand...
Click to collapse
Redownloaded and tried but failed...
Even if I tick just preloader, it fails to flash. Any help?? Or should I take to MMX center?? How much would it cost??
$hino said:
Redownload everything and try again... Go here.. http://forum.xda-developers.com/showthread.php?p=42269382
Click to expand...
Click to collapse
Okay I redownloaded and now its giving me error 3149 and stuck at 22℅ in green ... But my phone shows charging when connected to charger.
When I try to boot in recovery, it shows volume up is recovery, and when I press it, it shows Chd logo n shuts down...
Can I try only to flash Philz recovery and then can I restore backup?? Will it work??
Cod3AlchemisT said:
Okay I redownloaded and now its giving me error 3149 and stuck at 22℅ in green ... But my phone shows charging when connected to charger.
When I try to boot in recovery, it shows volume up is recovery, and when I press it, it shows Chd logo n shuts down...
Can I try only to flash Philz recovery and then can I restore backup?? Will it work??
Click to expand...
Click to collapse
That could work... First flash the stock recovery.... And then flash philz... If that doesn't work am afraid you're gonna have to go to service centre... But beware they are gonna loot you... One of my friends was asked to pay 1000 for ruining the phone..
$hino said:
That could work... First flash the stock recovery.... And then flash philz... If that doesn't work am afraid you're gonna have to go to service centre... But beware they are gonna loot you... One of my friends was asked to pay 1000 for ruining the phone..
Click to expand...
Click to collapse
Update: it shows charging but it isn't really!!
Can you give me steps for it??
What should I tick in so tools??
Sent from my A116 using XDA Premium 4 mobile app
$hino said:
That could work... First flash the stock recovery.... And then flash philz... If that doesn't work am afraid you're gonna have to go to service centre... But beware they are gonna loot you... One of my friends was asked to pay 1000 for ruining the phone..
Click to expand...
Click to collapse
Okay I now have working recovery.... I tried flashing Discovery but got screen flicker and auto shutdown.... Same with PXZ2 (bootloop) ... Can you give me cwm flashable zip for stock 4.2.1??
Sent from my A116 using XDA Premium 4 mobile app
Cod3AlchemisT said:
Okay I now have working recovery.... I tried flashing Discovery but got screen flicker and auto shutdown.... Same with PXZ2 (bootloop) ... Can you give me cwm flashable zip for stock 4.2.1??
Sent from my A116 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Here you go..Hit thanks if i helped.. http://d-h.st/fXr
$hino said:
Here you go..Hit thanks if i helped.. http://d-h.st/fXr
Click to expand...
Click to collapse
Is it cwm flashable???
Sent from my A116i Pure Xperia Z2 rom.
Cod3AlchemisT said:
Is it cwm flashable???
Sent from my A116i Pure Xperia Z2 rom.
Click to expand...
Click to collapse
Yes it is....
Same problem guys!!!
Hey guys
I got into a wierd problem today!
I am using MIUI ROM but flashed Discovery few days back so Boot logo is still of Mediatek(discovery rom)
It was perfectly working since installation!
But today - I pressed unlock button! Slided the screen unlock down , but screen didnt unlock , it got stuck there!
I pressed unlock button again and screen went off, Now i pressed unlock again to turn it on!
This time nothing came on screen , only hardware buttons light came up! and from this point on unlock button had no effect!
As last resort i pulled the battery! BUT now it gets stuck at boot logo(not bootanimation) . I cant open recovery or fastboot by volume buttons . It stays at bootlogo for around 30 seconds before restarting to again get stuck in boot logo!
If i connect phone without battery! MT65xx preloader gets installed on laptop but i cant do anything because it keeps getting restarted there also!
I am out of troubleshooting Ideas ! please suggest!
akshay961 said:
Hey guys
I got into a wierd problem today!
I am using MIUI ROM but flashed Discovery few days back so Boot logo is still of Mediatek(discovery rom)
It was perfectly working since installation!
But today - I pressed unlock button! Slided the screen unlock down , but screen didnt unlock , it got stuck there!
I pressed unlock button again and screen went off, Now i pressed unlock again to turn it on!
This time nothing came on screen , only hardware buttons light came up! and from this point on unlock button had no effect!
As last resort i pulled the battery! BUT now it gets stuck at boot logo(not bootanimation) . I cant open recovery or fastboot by volume buttons . It stays at bootlogo for around 30 seconds before restarting to again get stuck in boot logo!
If i connect phone without battery! MT65xx preloader gets installed on laptop but i cant do anything because it keeps getting restarted there also!
I am out of troubleshooting Ideas ! please suggest!
Click to expand...
Click to collapse
Flash stock ROM using sptools..... here is the link: http://forum.xda-developers.com/showthread.php?t=2312557
Just replace recovery.img with your own recovery of choice (rename it to recovery.img).
Flash it using sp tools..... i get BROM error but recovery gets flashed which will help you restore your nandroid backup.