[q] htc evo4 boost/metro - Android Q&A, Help & Troubleshooting

Im not gonna ask the obvious how to guides ive used google and found them and programs needed but i have a few questions.
if i do it for metro and follow the guide do i still need to go get the phone metroflashed (i dont have one in my state) or just follow guide cause it says no where in any of the ones i found they u need to get the phone flashed by metro at all.
and for boost i know you have to do the donor phone with it
last question is has anyone got kicked off there plan for having the evo on there. for example any way for them to find out after you do this ?
thanks in advance for anyone who takes the time to read and help thanks

From everything I've read you need to have metro FLASH the phone in store FIRST before following the guide and installing Metrodroid.
I'm trying to find out myself now if possible to follow the unlocking guide AFTER Metrodroid has been installed.

Related

New to rooting - Need help

I've been trying to root my HTC Hero for the past 2 days and since I'm COMPLETELY new to all of this, I found no easy method.
After a lot of research, I realized I need to patch my recovery screen so I can load new ROMs (correct me if I'm wrong). I've tried many methods, one where I install Flashrec onto my phone, but that didn't work. I also tried this method I found on android.modaco.com. I can't link outside of this site since I'm new, so I can't show you the method. I can tell you the problems I encountered when trying the two procedures and maybe you can tell me what to do from there.
I also tried the Goldcard method. I think it worked out and my memory card is good to go, but I don't know where to go from there. (Also, how can I test out my memory card to check if it really has the Goldcard?)
Please don't bash me for not knowing anything on this stuff. I'd love to learn about it, but I just don't know where to start.
Help would be very appreciated.
EDIT: Sorry if this is in the wrong section. I searched throughout the entire site and tried to find the most appropriate section for me to put this thread and thought this was the place.
MoeKz said:
I've been trying to root my HTC Hero for the past 2 days and since I'm COMPLETELY new to all of this, I found no easy method.
After a lot of research, I realized I need to patch my recovery screen so I can load new ROMs (correct me if I'm wrong). I've tried many methods, one where I install Flashrec onto my phone, but that didn't work. I also tried this method I found on android.modaco.com. I can't link outside of this site since I'm new, so I can't show you the method. I can tell you the problems I encountered when trying the two procedures and maybe you can tell me what to do from there.
I also tried the Goldcard method. I think it worked out and my memory card is good to go, but I don't know where to go from there. (Also, how can I test out my memory card to check if it really has the Goldcard?)
Please don't bash me for not knowing anything on this stuff. I'd love to learn about it, but I just don't know where to start.
Help would be very appreciated.
EDIT: Sorry if this is in the wrong section. I searched throughout the entire site and tried to find the most appropriate section for me to put this thread and thought this was the place.
Click to expand...
Click to collapse
try searching for the unlockr on google, helped me loads!! if i'm right the flashrec method has changed (throws up a error but still roots), dont count me on that one!!
5 reasons not to root your Android
Hello Moekz, I am more or less in your situation, may I ask you a question? are you usually developing? if yes.. you probably will need a root, if not then probably it's better to keep the device as it is. There are few problems with rooting the phone and if the reason is to update to the 2.1...forget it now! At the moment there is not the perfect ROM on Web, we need to wait until HTC comes out with the official ROM. If you decide to root the phone you have to be sure the bluetooth, wifi are ok and the battery life is good...then is tricky and maybe dangerous for your phone if you don't follow step by step and perfectly the tutorial of Unlocker.com and xda suggestion. Anyway there is a video even on youtube: How to root your Hero with one click..watch it and then decide. I would wait 3-4 weeks. Good luck!
francomur99 said:
Hello Moekz, I am more or less in your situation, may I ask you a question? are you usually developing? if yes.. you probably will need a root, if not then probably it's better to keep the device as it is. There are few problems with rooting the phone and if the reason is to update to the 2.1...forget it now! At the moment there is not the perfect ROM on Web, we need to wait until HTC comes out with the official ROM. If you decide to root the phone you have to be sure the bluetooth, wifi are ok and the battery life is good...then is tricky and maybe dangerous for your phone if you don't follow step by step and perfectly the tutorial of Unlocker.com and xda suggestion. Anyway there is a video even on youtube: How to root your Hero with one click..watch it and then decide. I would wait 3-4 weeks. Good luck!
Click to expand...
Click to collapse
Well, that's just it. I don't want to wait 3-4 weeks for the update. It's been a while since HTC released Android 2.1, and we still don't have it for the Hero.

unable to downgrade my rom, need advice

Hi guys I have a generic unbanded hero running 2.73.405.66 and have been trying to root it for the past few days with no sucess.
Ive managed to create a goldcard ok (I think) and am able to start the install of the earlier rom ok, but once the install starts and reboots the phone, after a minute or so i get an incorrect bootloader error and the install stops.
Just wondering if anyone using this ROM has managed to downgrade to gain root, if so a prod in the right direction would be appreciated
Oh and I know some of you are going to say search the forums, but I cannot seem to find any info on this latest rom, all the guides seem to cover earlier or carrier specific ROMS.
I dont think you need to downgrade the 405 bootloader. Have you tried the one click method at unlocker.com.
rosso22 said:
Hi guys I have a generic unbanded hero running 2.73.405.66 and have been trying to root it for the past few days with no sucess.
Ive managed to create a goldcard ok (I think) and am able to start the install of the earlier rom ok, but once the install starts and reboots the phone, after a minute or so i get an incorrect bootloader error and the install stops.
Just wondering if anyone using this ROM has managed to downgrade to gain root, if so a prod in the right direction would be appreciated
Oh and I know some of you are going to say search the forums, but I cannot seem to find any info on this latest rom, all the guides seem to cover earlier or carrier specific ROMS.
Click to expand...
Click to collapse
My guide can be used for all users.
You just need to downgrade! You need the correct driver, check my ADB / Sync guide for the driver.

[Q] Unable to Root HTC Evo Design 4g. Version 2.3.4

Hello there, I was hoping somebody could help me with this.
So i've been trying to get my Evo Design 4g rooted but I always seem to get in some sort of a problem in the last steps. I first tried Frigid's SuperUserV3(in this post: http://forum.xda-developers.com/showthread.php?t=1343114), but did not get the phone rooted, I even got the colored flashing screen that says "Rooted" but superuser(Downloaded from Google Play) does not find a thing, the root checker says my phone is not rooted, and Titanium Backup says it cannot get access and that I need to root my phone.
Therefore I tried a different approach to the problem, and after some hours of research I found this post:
http://forum.xda-developers.com/showthread.php?t=1470038
Which says that after all of that I will be able to "root" my Evo design, it pretty much tells you to use the same steps as this other post:
http://forum.xda-developers.com/showthread.php?t=1239821
(by the way I do not really know what HBoot 1.5 means or what is it's purpose)
So after following the instructions on both of the posts I've done the first steps without problem, my Design already has been unlocked and I have already pushed the Recovery.img and the su.zip into the SD, I also went into fastboot and had the recovery option in there, I selected it and the phone started to restart as in this video:
http://www.youtube.com/watch?v=sGlTGu_CBLI&feature=player_embedded
I however did not get anything after the HTC screen with the white background, it just stays there, I've waited for like aprox. 10 mins and it doesn't move or change so I'm guessing something must be wrong.
Now I don't know if all of this is not working because of my phone's version.
It is relatively new I got it a week ago as a replacement for an older one that had some problems with the charge port. Anyways, as soon as the phone was given to me I updated and everything(I did not Think/Know a lot about rooting at this point so I let it all install and it left me with this software version:
Android Version: 2.3.4
HTC Sense Version: 3.0 (I don't know if it has anything to do with rooting or this)
Software Number: 2.12.651.8 710RD
All of this as of may 31 2012
I also found this other post: http://forum.xda-developers.com/showthread.php?t=1399351
It does has some stuff on it for after the rooting and 2 links to do so but, they seem to be outdated/dead as the link that takes you to supertool still reads v2, and he has already released v3. The second one seems to take you to a page that doesn't exist anymore so the post just doesn't seem to be able to help me.
I also tried some of the other posts that this page recommended when posting this but none of them seem to have a real answer and take me in some kind of a loophole of the early mentioned options or have no answers about the rooting.
As an ultimate resource I've been pondering about using rEVOked with the settings of the Evo 4g since it seems to be very similar to my phone, or at least something similar to those words. Also tried UnlockRoot at some point in between but didn't work at all either. Don't think it is relevant though since there is not a lot I can do or work with when it comes to a one-click program.
Any Help would be greatly appreciated and I will try my best to continue researching and maybe post any changes or an official way to root this device since it seems as there is none around at least not to this point.
I am new to here and the whole rooting topic but i will try my best to be useful to the community and keep posting useful stuff around here.
Thanks!. Btw your noob video is hilarious.
I'm going to suggest you check out the design 4g / hero s section in the forums of sdx-developers.com & 2fastroms.com (2fast's site is down atm, but most files you need are in his download section for the hero s). There isn't an official sub section for the phone here at xda & its hard to find support. 2fast has a cwm recovery, custom kernels, & roms that works great with the design 4g (I'll pm links as soon as the site is back up). Sdx-developers gears towards more roms & mods. You will find a section for rooting your design at sdx here http://forum.sdx-developers.com/index.php?topic=19080.0 Sorry for not answering your question & just refering you to other sites, but I think you will find you solution & more support from the sites I posted than here at xda.
Thanks, it seems as that actually was the page that the other post was redirecting me to, so I guess I'll have to wait for that; I actually found that the problem might be that the Recovery.img that I'm using does not work on Evo Design/ Hero S phones. I found a different image on a post in here that got extracted from a Foreign forum, I'll try that after class and then see how everything goes. I would still love to get a link to a forum that has an "official" root for it though.
Thanks a lot
This is the correct recovery (clockworkmod) for the design 4g. Just rename it to Ph44IMG & place it on your sd card. Boot to hboot & let the phone find it & select to install. Remove or rename file from you sd card before you try to boot into your os. http://dl.dropbox.com/u/24065431/Design_PH44IMG.zip
Is that one for Sprint?
I'm in Indonesia and had tried recovery for Boost one and had GSM problem, no signal at all.

OX+ need help flashing.

Ok, you know, today I got my phone, I had been waiting forever, I got it and within 2 hours I screwed it up. I have followed and followed many forums and posts on how to fix this, and I am just.. lost. So please i need your help, I am seriously stressing out, and I know I shouldnt, but this is my first android phone. I am shot right now.
I had unlocked the bootloader, and then I tried to root it, then it rebooted and went into bootloop mode or whatever it is.
I still cannot figure out how to use this Hasoons2000's OX+ AIO kit. So I am just leaving it alone.
Ok the PC doesn't recognize it as a storage device, but the fastboot does recognize it, as I have executed a few commands, like reboot or something, just to test that it works.
My phone is ATT but I am in Russia so there is no sending this anywheres. All I want to do is reboot the OS and have it work again, I dont care what mod or stock rom it is, I just really need some direction here.
I know something about RUU, ATT RUU, Fastboot, some other stuff, I have like 5 pages on XDA pulled up and I cant figure this out.
What is the CMW or TWRP or whatever it is called? How do I flash a zip or an img to the phone? I really just want my phone on again.
Yes Ive done stupid noob stuff, but you learn. So please I am kindly asking for any assistance,
No need to stress. Its fairly hard to brick your phone, good way to learn quick also is to screw with it.
Just need the right guide and I think this will help you since u have fastboot access hopefully. Its a pain rebuiling so read everything so u only have to do it once.
Remember these guides are for different phones so don't use the ruu or recovery links, user my links below.
Your phone is:
AT&T(Evitare)
This guide:
http://forum.xda-developers.com/showthread.php?p=30863908
Or this guide:
http://forum.xda-developers.com/showthread.php?p=27301573
This is for another phone so you need to choose an ATT ruu from here for step 1:
Your phone is a HTC One X+ for AT&T(Evitare)*
http://www.androidfiles.org/ruu/?developer=EvitaRE
More info here for custom recoveries etc which is cwm and twrp for deploying roms, backing up your current installed Rom and general tools for fixing or enhancing your phone, displayed prior to your phone booting into android:
http://forum.xda-developers.com/showthread.php?p=37778531
Sent from my HTC One X+ using xda premium
somemadcaaant said:
No need to stress. Its fairly hard to brick your phone, good way to learn quick also is to screw with it.
Just need the right guide and I think this will help you since u have fastboot access hopefully. Its a pain rebuiling so read everything so u only have to do it once.
Remember these guides are for different phones so don't use the ruu or recovery links, user my links below.
Your phone is:
AT&T(Evitare)
This guide:
http://forum.xda-developers.com/showthread.php?p=30863908
Or this guide:
http://forum.xda-developers.com/showthread.php?p=27301573
This is for another phone so you need to choose an ATT ruu from here for step 1:
Your phone is a HTC One X+ for AT&T(Evitare)*
http://www.androidfiles.org/ruu/?developer=EvitaRE
More info here for custom recoveries etc which is cwm and twrp for deploying roms, backing up your current installed Rom and general tools for fixing or enhancing your phone, displayed prior to your phone booting into android:
http://forum.xda-developers.com/showthread.php?p=37778531
Sent from my HTC One X+ using xda premium
Click to expand...
Click to collapse
thank you very much I really appreciate your help. I finally figured out the ruu.exe thing, I didnt know they had to be the same numbers, ex 1.15.xxx.xx or whatever.
You see what happened originally was that I unlocked the bootloader, easy pie, but I tried to root it and that is when it started looping. Maybe I didnt understand something, but I seemed to have messed up right there.
Is there really any reason to root? I mean yeah there is super user, but doesnt bootloader help with that a bit? I know BL is for flashing custom roms and all.
May I ask how to flash a custom rom? I really want all of this ATT stuff off of my phone, I really dislike it.
Yes I know I can search, here, google etc. And maybe I should, but I end up getting so many different results, and here and there, and this and that. It really is just easier to talk to one single person who knows what they are doing. So if you could help me, I would again extend my appreciation.
Also I have the android revolution for ox+, and I dont know if it is.. you know.. THE BEST or not. Dont know what to do.
And yes, you live and learn, took me forever with iphones, then I realized hacking and roms and stuff were completely different from iphone. So new game new story.

[Q] Tried to flash CM (wrong version) need help

[SUMMARY] - If you're bored or find this kind of thing funny you could read this post from the bottom up and watch a noob go from freaking out, to learning how to troubleshoot then finally resolving his issue... all of this just by reading the FAQ thread and following some advice found there. I've learned my lesson... read XDA *before* trying to flash a new ROM.
[SOLVED] - Solution was to flash the boot.img from stock ROM. Once I did that the phone rebooted and went into the typical device setup. Now I guess I can update my ROM.
[FIRST UPDATE]
Turns out a lot of exactly what I was looking for is on the FAQ page (first bullet in Q15, no less). Trying what I found there. Please don't blast me with, Maybe you should have read the FAQ... I've been all over the place trying to find something that would work quickly... I only have one phone and I commute into Philly for work so I need a working phone... Now that I've found the XDA HTC ONE X + FAQ, I think I'll be fine. Thanks for the great site... so much info on here to read... good for long train rides.
[ORIGINAL POST]
Hi, I ran into a problem trying to flash CM to my HOX+ (AT&T). I followed the instructions here (wiki.cyanogenmod.org/w/Install_CM_for_enrc2b), but that was for the International version, not the AT&T... Dumb? Guess so, I don't know much about the difference, but it's what happened. I've tried to connect to the phone (per the instructions on the wiki) to adb push the ROM I want to flash, but I keep getting the device not found error. The instructions warn of possible driver error on the PC, but I haven't found a driver yet that will allow me to connect. I can get into recovery (CWM-based Recovery v6.0.2.7) but with no ROM on the sdcard I have nothing to flash and can't figure out how to get the file onto the device. The wiki should probably mention putting the ROM on the device prior to going through the HTC unlock steps, just in case, but maybe they assume a more cautious user than I am. I've tried to flash from sideload, but don't know if that is even possible?
Can someone point me in the right direction, or start asking questions to help me figure out what my next step is? Just want to get back to a working phone...
Thanks!
Signature?

Categories

Resources