Related
Ok, got my SGS2 a few days ago, Installed KIES and Samsung drivers.... When I try to flash an insecure kernel on my phone (To obtain root permissions), Odin keeps getting stuck on zImage... Anybody got a solution??
Make sure you are flashing the correct kernel version and that all kier processes are closed.
Already did that, still no luck getting past zImage
Did you manage to resolve this? I'm in a similar position - i'm trying to install clockworkmod but when I select start in odin once the file has been selected (PDA) it seems to proceed but then just hangs at zImage
<ID:0/017> Removed!!
<ID:0/017> Added!!
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> zImage
This is my first flash, however I just cannot get it to work? I have all the relevant drivers on my mahine and my S2 is rooted, any ideas anyone?
Thanks
As per that post a couple above yours, make absolutely 100% sure that Kies/any of its processes are not running in Windoze Task Manager. Can't stress this enough.
Failing that, could be a bad download, try downloading the kernel (I presume you're trying to flash a kernel that has CWM ?) again.
Also, uninstall Kies. Reboot your PC, download a fresh copy of Kies (you need the drivers for Odin to work), fresh reinstall of Kies. Reboot & try flashing the kernel again.
thanks for the fast reply! I did have kies open earlier it may have not closed correctly, i'll try a reboot first before uninstalling and reinstalling kies
thank you
ok ive tried that but no joy
just to clarify im not trying to install a new rom - just trying to install clockworkmod (have downloaded the tar file from this site) and have rooted my s2
i used the new method mentioned on this site to root my s2 which only installs SuperUser and nothing else hence me wanting to install CWM
..still searching for a solution, any help appreciated
Uninstall KIES. It's safe. Samsung USB drivers are a different package.
Change ports, re-download, etc. Make sure your cable is in a good state.
quick update, i've uninstalled kies and tried again but no luck. I've also tried a different cable but again nothing
I'm thinking perhaps it might be the .tar file itself - I initially mentioned I downloaded it from this site but now i've realised it wasn't from this site but another... rootingdroid .com
maybe I need to re-download CWM (if available from here) and try again
Also worth mentioning my phone is network locked to Orange (but I dont believe this would have an affect on anything)
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
jje
tried the above but same issue, seems to stop at zimage no matter what tar file I use (PDA)
do I need to 'wipe cache partition' in the existing Android system recovery first? Dont think so but just covering al angles just so i can get CWM, thanks
got it installed! used an older version of odin .... version 1.30
may help others with the same issue
thanks to all
flylife2k said:
got it installed! used an older version of odin .... version 1.30
may help others with the same issue
thanks to all
Click to expand...
Click to collapse
I also could not do it using odin 1.85. Looks like Odin 1.81 as posted by entropy is working. It's still going on though.
"NAND WRITE START!" from Odin when trying to flash a Brand new S3 i9300.Problem from the box.
No service centre here.
Thanks
Why is it so hard to post in the right section for some? You drive in the opposite lane with you care also? "didn't bother looking for signs or search for other cars so sorry daaah"
Sent from my GT-I9300 using xda premium
Stop ****ing around with it! If you don't know what your doing....don't do it! Seriously man.....
Sent from my GT-I9300 using xda premium
Noted, After opening the box ,the client wanted latest whatsapp plus a new dialup pad app.After that handset hung and rebooted in samsung i9300 only.Download mode ok but same error.
I find it really helpful of you all to just yell at someone who is trying to find an answer. I have the same problem, and I am not inexperienced with flashing phones. The question still remains: Can there be something done via Odin or adb or whatever or is it a case for repair.
I would really, really appreciate to get some useful answers. I can **** myself I don't need others to do this.
Thanks in advance.
EDIT: I have found a solution thanks to a very helpful friend who found the relevant post here on xda (http://forum.xda-developers.com/showpost.php?p=27995287&postcount=16). You need to flash a 3-file stock rom via Odin v3.0.4 with mx.pit-file and repartition ticked. This worked for me and I very much hope that it also works for everyone else.
With all the pit files, i m getting there is no pit file.I m still looking for 3 files firmware.
Can someone post me a link for a 3 files pda phone and csc for S3.All the files i ve found are single file.
Thanks
The only 3 part files and pit for the Samsung range have in the past been posted on Sammobile.com .You will have to look and see if they post such for SGS3 . Never seen them on XDA and 3 part files posted on XDA have in the past been from sammobile .
jje
Here's the link to a 3-file firmware:
https://hotfile.com/dl/156320160/eb4a939/I9300XXALE8_I9300OJVALE7_OJV.zip.html
Here's the one from SamMobile for the pit-files:
http://www.mediafire.com/?ddfpfkk2pb8326k
And here's the post who helped me:
http://forum.xda-developers.com/showpost.php?p=27995287&postcount=16
from this thread:
http://forum.xda-developers.com/showthread.php?t=1737996&page=2
To all the others: This is what help looks like, and don't forget you were all in these same shoes once.
zimbardo.ea said:
Here's the link to a 3-file firmware:
https://hotfile.com/dl/156320160/eb4a939/I9300XXALE8_I9300OJVALE7_OJV.zip.html
Here's the one from SamMobile for the pit-files:
http://www.mediafire.com/?ddfpfkk2pb8326k
And here's the post who helped me:
http://forum.xda-developers.com/showpost.php?p=27995287&postcount=16
from this thread:
http://forum.xda-developers.com/showthread.php?t=1737996&page=2
To all the others: This is what help looks like, and don't forget you were all in these same shoes once.
Click to expand...
Click to collapse
All your work and not one bloody thanks, come on people, thank the woman!!
zimbardo.ea said:
Here's the link to a 3-file firmware:
https://hotfile.com/dl/156320160/eb4a939/I9300XXALE8_I9300OJVALE7_OJV.zip.html
Here's the one from SamMobile for the pit-files:
http://www.mediafire.com/?ddfpfkk2pb8326k
And here's the post who helped me:
http://forum.xda-developers.com/showpost.php?p=27995287&postcount=16
from this thread:
http://forum.xda-developers.com/showthread.php?t=1737996&page=2
To all the others: This is what help looks like, and don't forget you were all in these same shoes once.
Click to expand...
Click to collapse
Man, you are so wonderful, will post result.Done or not, you are a time saver.
Thanks ......Thanks
History of the device.
Brand New from the Box,The owner went to google-play(market) and downloaded 2 apps.One of them whatsapp.The phone froze and rebooted and Stuck at Startup Logo.
Update:Using the 3 Files firmware.
1= With pit file:
added
enter CS for MD5
check md5..Do not unplug the cable..
please wait..
CODE_I9300XXALEF_....
MODEM_I9300XXLEF_REV...
CSC_OXE_I9300XEALE4_...
Checking MD5 finished Successfully..
Leave CS..
Odin v.3 engine (ID:31)
FILE ANALYSIS...
Setupconnection..
Initialzation..
Set Pit file..
DO NOT TURN OFF TARGET!!
Re-Partition operation failed.
Added!!
All threat completed.(succeed 0/failed 1)
---------------------------------------------
2= Without Pit File
added
enter CS for MD5
check md5..Do not unplug the cable..
please wait..
CODE_I9300XXALEF_....
MODEM_I9300XXLEF_REV...
CSC_OXE_I9300XEALE4_...
Checking MD5 finished Successfully..
Leave CS..
Odin v.3 engine (ID:31)
FILE ANALYSIS...
Setupconnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
sboot.bin
NAND Write Start!!
param.bin
tz.img
boot.img
Complete(Write)operation failed.
Added!!
All threat completed.(succeed 0/failed 1)
----------------------------------------
The Only File which can be loaded SUCCESSFULLY and Odin can give PASS is GT-I9300_Boot_Recovery.tar, But device will reset and back in Download mode.
Ps: All types of Single files could not be loaded
Only Download Mode available,Phone cannot enter Recovery mode
All Kernels and recovery tars cant cant fully be loaded,Odin will stop and FAILED
Different types of Odin tried,including 3.04
==========================================
No Service centre in this Country,So,will just keep it till Solution Comes.
blaiseid said:
History of the device.
Brand New from the Box,The owner went to google-play(market) and downloaded 2 apps.One of them whatsapp.The phone froze and rebooted and Stuck at Startup Logo.
Update:Using the 3 Files firmware.
1= With pit file:
added
enter CS for MD5
check md5..Do not unplug the cable..
please wait..
CODE_I9300XXALEF_....
MODEM_I9300XXLEF_REV...
CSC_OXE_I9300XEALE4_...
Checking MD5 finished Successfully..
Leave CS..
Odin v.3 engine (ID:31)
FILE ANALYSIS...
Setupconnection..
Initialzation..
Set Pit file..
DO NOT TURN OFF TARGET!!
Re-Partition operation failed.
Added!!
All threat completed.(succeed 0/failed 1)
---------------------------------------------
2= Without Pit File
added
enter CS for MD5
check md5..Do not unplug the cable..
please wait..
CODE_I9300XXALEF_....
MODEM_I9300XXLEF_REV...
CSC_OXE_I9300XEALE4_...
Checking MD5 finished Successfully..
Leave CS..
Odin v.3 engine (ID:31)
FILE ANALYSIS...
Setupconnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
sboot.bin
NAND Write Start!!
param.bin
tz.img
boot.img
Complete(Write)operation failed.
Added!!
All threat completed.(succeed 0/failed 1)
----------------------------------------
The Only File which can be loaded SUCCESSFULLY and Odin can give PASS is GT-I9300_Boot_Recovery.tar, But device will reset and back in Download mode.
Ps: All types of Single files could not be loaded
Only Download Mode available,Phone cannot enter Recovery mode
All Kernels and recovery tars cant cant fully be loaded,Odin will stop and FAILED
Different types of Odin tried,including 3.04
==========================================
No Service centre in this Country,So,will just keep it till Solution Comes.
Click to expand...
Click to collapse
Which pit-file did you use? The mx.pit file? It worked with this one only. I'm sorry that my help didn't solve your issues
i tried all pit files including the mx one with no luck.
blaiseid said:
i tried all pit files including the mx one with no luck.
Click to expand...
Click to collapse
just use (mx.pit) file in 10 seconds your smartphone is back
treskilos said:
just use (mx.pit) file in 10 seconds your smartphone is back
Click to expand...
Click to collapse
I had my phone bricked, could enter only in download mode, nothing more, tons of failed installations in Odin
Well, after flashing ONLY the mx.pit File, i was able to flash then the custom recovery and even a single PDA firmware file
THANKSSSS!
treskilos said:
just use (mx.pit) file in 10 seconds your smartphone is back
Click to expand...
Click to collapse
OMG THANK YOU....I almost got a heart attack ^^
I confirm using the mx.pit file with odin worked...could boot to recovery and flash a rom from sd.
Thanks again
Can someone help me please?
As i said in the previous post i managed to get to the recovery menu and flash a custom rom but whenever i try to reflash the stock with odin it stucks at NAND Writing!
I don't know what to do i tried everything...other version of odin other usb, installed kies again ect....
I'm on Android Revolution HD right now....my phone is a Samsung Galaxy S III GT-I9300...i really wound like to be able to flash the stock rom is there a way to install it from the CWR and if yes will i be able to install CWR after?
edit: also i forgot to add i have siyah kernel 1.8.9 and previously installed the siyah recovery menu from the foxhound 2.2 rom..i'm on CWR now tho...
zeroblu3 said:
Can someone help me please?
As i said in the previous post i managed to get to the recovery menu and flash a custom rom but whenever i try to reflash the stock with odin it stucks at NAND Writing!
I don't know what to do i tried everything...other version of odin other usb, installed kies again ect....
I'm on Android Revolution HD right now....my phone is a Samsung Galaxy S III GT-I9300...i really wound like to be able to flash the stock rom is there a way to install it from the CWR and if yes will i be able to install CWR after?
edit: also i forgot to add i have siyah kernel 1.8.9 and previously installed the siyah recovery menu from the foxhound 2.2 rom..i'm on CWR now tho...
Click to expand...
Click to collapse
Go to recovery and then mounts and storage.
Format system, data and cache. Also do a factory wipe on the first cwm page.
After that pull battery wait 5 seconds abs reinsert it.
Hold power home and vol down to go to download mode. Then press the up arrow.
Then plug it in to computer. In odin select pda csc and modem or if it's a one file firmware just select it in pda. Do not tick repart or select a pit file.
Then hit start.
Drew071
Sent from my GT-I9300 using xda app-developers app
drew071 said:
Go to recovery and then mounts and storage.
Format system, data and cache. Also do a factory wipe on the first cwm page.
After that pull battery wait 5 seconds abs reinsert it.
Hold power home and vol down to go to download mode. Then press the up arrow.
Then plug it in to computer. In odin select pda csc and modem or if it's a one file firmware just select it in pda. Do not tick repart or select a pit file.
Then hit start.
Drew071
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
OMG this actually worked...
So here is what i did...step by step...
1. Uninstalled Kies but did keep the USB drivers..
2. Made a Nandroid backup in CWM and followed Drew071's instruction and removed the ext_sd card...i actually did that before but without the pull battery step...
3. Used Odin 3.07 with only auto reboot and f. time reset ticked and loaded the stock rom that i took from sammobile in PDA...
5. Flashed as usual O_O....
I really don't know what it was but it scared the s..t out of me ^^
I'll try to root the stock FW now with the usual odin method and let you know if it works...thx all for your support
EDIT: Ok so i used CF-Auto-Root-m0-m0xx-gti9300 with Odin v3.07....all went well and i'm a happy root user again ^^
I have Samsung S3 (GT-I9300)
Followed the guide in http://forum.xda-developers.com/showthread.php?t=1684535
After that when I reboot in recovery it tells me:
Custom Binary Downloads: Yes (2 counts)
Current Binary: Custom
System Status: Custom
The reason I have 2 counts is that I installed 'CF-SGS3-CWM-v5.5-v1.5.tar' with Odin3 v.1.85 and discovered after that there was a later version Odin3 v.3.04. Then I reinstalled the tar-file with the later version ... I guess no harm done. Odin installed successfully both times.
But where is SuperSU & ClockWorkMod ???
I thought the were installed with the tar-file.
When I boot in recovery there is no option 'install from zip' ... so I can't install the downloaded 'CWM-SuperSU-v0.96.zip' either.
Tried to install SuperSU from Play (both free & pro) but when clickin on SuperSu error message 'there is no SU binary installed, and SuperSU cannot install it'
So where did the simple rooting go wrong ???
Appreciate help.
The device restores stock recovery on boot unless you
* rename the etc/install_recovery.sh
* or take the x-flag from it.
Sent from my GT-I9300 using xda app-developers app
Had something similar some time ago, but it only sended me to stock recovery while using adb to reboot.
Download cf root from chainfire and flash it with Odin.
Afterwards install cwm touch with rommanager.
Worked for me back then.
Edit: btw, the thread you are referring to is for cwm touch only, got nothing to with root.
Sent from my GT-I9300 using Tapatalk 2
Simple rooting are you sure you followed the instructions ???
After that when I reboot in recovery it tells me:
Custom Binary Downloads: Yes (2 counts)
Current Binary: Custom
System Status: Custom
NOPE not shown in recovery but in DOWNLOAD/ Odin Mode .
Confirmed working as of 30 seconds ago .
http://forum.xda-developers.com/showthread.php?t=1695238
jje
You are right ... it is shown in download mode ... my mistake
As mentioned I downloaded CF Root 'CF-SGS3-CWM-v5.5-v1.5.tar' from chainfire and flash it with Odin.
I got this from Odin:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:1/004> Added!!
Then I downloaded/installed 'rommanager' from Play but when running it there is an error message that I am not root.
Don't understand howto get root privilidges ... thought flashing CF Root took care of that.
zkab said:
You are right ... it is shown in download mode ... my mistake
As mentioned I downloaded CF Root 'CF-SGS3-CWM-v5.5-v1.5.tar' from chainfire and flash it with Odin.
I got this from Odin:
Added!!
Odin v.3 engine (ID:3)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
recovery.img
NAND Write Start!!
RQT_CLOSE !!
RES OK !!
Completed..
Added!!
All threads completed. (succeed 1 / failed 0)
Added!!
Then I downloaded/installed 'rommanager' from Play but when running it there is an error message that I am not root.
Don't understand howto get root privilidges ... thought flashing CF Root took care of that.
Click to expand...
Click to collapse
That's just cwm, you need to flash cf-root.
Gimme a sec and I'll link you.
http://forum.xda-developers.com/showthread.php?t=1695238
Sent from my GT-I9300 using xda premium
As the name tells it is cwm not root.
Go here: http://forum.xda-developers.com/showthread.php?t=1695238
download cf root from the third post and flash it with Odin, afterwards you have root and cwm installed. If you want cwm touch do like told before with rommanager.
Edit: beaten^^
Sent from my GT-I9300 using Tapatalk 2
Thank you nodstuff & Tectas ... now I am airborne and much wiser
Well ... it seems that I am not 100% airborne.
After I installed 'CF-Root-SGS3-v6.4.zip' with Odin I maid a backup.
Then I flashed 'RR_JB_V3.0.6_AOKP_4.1.1_I9300.zip' & configured & rebooted ---> S3 is dead after the 'Samsung S3 GT-I9300' is displayed.
Now I have to boot into recovery and restored my backup to get S3 alive again.
What is wrong with 'RR_JB_V3.0.6_AOKP_4.1.1_I9300.zip' ?
I have used RR before on my old S2 and had never experienced any problem ?
Is it a S3 issue ?
zkab said:
Well ... it seems that I am not 100% airborne.
After I installed 'CF-Root-SGS3-v6.4.zip' with Odin I maid a backup.
Then I flashed 'RR_JB_V3.0.6_AOKP_4.1.1_I9300.zip' & configured & rebooted ---> S3 is dead after the 'Samsung S3 GT-I9300' is displayed.
Now I have to boot into recovery and restored my backup to get S3 alive again.
What is wrong with 'RR_JB_V3.0.6_AOKP_4.1.1_I9300.zip' ?
I have used RR before on my old S2 and had never experienced any problem ?
Is it a S3 issue ?
Click to expand...
Click to collapse
Have you follow the installation guide from RR thread (specially the wipe things...) ?
Of course I forgot ... the wipe things... thanks
Can you advise me about the modem thing ... I googled and found it has to do with the reception signal
Before I flashed I had (Samung default) basbandversion: I9300XXLH1
When configuring the kernel there were the options for modem:
DXLG2
XBLFB
XXLF3
XXLF5
Which one to choose ? I took the default one DXLG2
Is there any documentation about these guys ?
zkab said:
Of course I forgot ... the wipe things... thanks
Can you advise me about the modem thing ... I googled and found it has to do with the reception signal
Before I flashed I had (Samung default) basbandversion: I9300XXLH1
When configuring the kernel there were the options for modem:
DXLG2
XBLFB
XXLF3
XXLF5
Which one to choose ? I took the default one DXLG2
Is there any documentation about these guys ?
Click to expand...
Click to collapse
No docs re modems . Try them all .
jje
Since Samsung had XXLH1 is there one of the modems
DXLG2
XBLFB
XXLF3
XXLF5
to prefer ?
It strange to have options to choose from and no documentation is provided ... just close the eyes and point ...
I found a easy solution for this
if you're getting the binary error
just ignore it and root again with autoroot
1.download cf auto root (just google it)
2.use odin to root
3.download super su from playstore (when you use auto root super su gets removed)
4.rooted
youngtodie said:
I found a easy solution for this
if you're getting the binary error
just ignore it and root again with autoroot
1.download cf auto root (just google it)
2.use odin to root
3.download super su from playstore (when you use auto root super su gets removed)
4.rooted
Click to expand...
Click to collapse
Had a cross between the issues here. Had flashed CF-Root through Odin and couldn't get it to boot into recovery. So flashed again with Auto-Root it opened into recovery and then still didn't appear to be rooted.
Downloaded SuperSU from the playstore and hey presto... it's working like a charm.
Hello!
I Have dead (stuck on Samsung logo) GalaxyS 5.0 International version. I have try to flash Clock Work Mod Recovery, but without success. Still have stock Recovery.
I have also try to flash many other firmwares via Odin, but device still hang on Samsung logo, right after boot animation. Can You help me somehow?
It might help if you told us what caused or what you were doing before the bootloop (the cycling of the Samsung logo) in the first place...
Sent from my YP-G70 using xda app-developers app
My friend tell me he try to change ROM, but he not tell me what goes wrong.
Flash R14 kernel,enter recovery and flash some custom rom
Sent from my Nexus 7 using xda app-developers app
kwaku85 said:
Hello!
I Have dead (stuck on Samsung logo) GalaxyS 5.0 International version. I have try to flash Clock Work Mod Recovery, but without success. Still have stock Recovery.
I have also try to flash many other firmwares via Odin, but device still hang on Samsung logo, right after boot animation. Can You help me somehow?
Click to expand...
Click to collapse
you have the international version so you need to flash this fileYP-G70-Kernel-r14.tar from here http://forum.xda-developers.com/showpost.php?p=20750550&postcount=1
if you need a custon rom i can help you with that just say the word
Still same problem. Kernel 14 is in .zip file, so I can't flash with Odin, after flashing Kernel 13 there is still stock recovery. Only update.zip file, "install zip from sdcard" option not exist. I have no idea what's wrong with this device...
kwaku85 said:
Hello!
I Have dead (stuck on Samsung logo) GalaxyS 5.0 International version. I have try to flash Clock Work Mod Recovery, but without success. Still have stock Recovery.
I have also try to flash many other firmwares via Odin, but device still hang on Samsung logo, right after boot animation. Can You help me somehow?
Click to expand...
Click to collapse
If you don't mind reinstalling apps, just do a factory reset in stock recovery.
Sent from my Galaxy Nexus
No, I mean I can't flash anything in Recovery, because it's stock. There is no option to flash from zip. How can I flash ClockWork Mod recovery?
kwaku85 said:
No, I mean I can't flash anything in Recovery, because it's stock. There is no option to flash from zip. How can I flash ClockWork Mod recovery?
Click to expand...
Click to collapse
Download Entropy's first version - it's a tar file that can be used with Odin. Yes, I know your buttons won't work, but they aren't needed for CWM. So once that's flashed, then you can flash rj's kernel in recovery.
I have flash device with r2 Kernel (first working in .tar) and R13 (latest in .tar), but after flashing I still have stock recovery, not CWM. So, I can't play with custom ROMs, because in stock Recovery it's not possible to flash Custom ROMs. Is there any other way to flash CWM?
kwaku85 said:
I have flash device with r2 Kernel (first working in .tar) and R13 (latest in .tar), but after flashing I still have stock recovery, not CWM. So, I can't play with custom ROMs, because in stock Recovery it's not possible to flash Custom ROMs. Is there any other way to flash CWM?
Click to expand...
Click to collapse
R13 has CWM..if you flash it then you have CWM.
Sent from my Nexus 7 using xda app-developers app
So, I have not. I have try flashing few kernels and I still have stock Recovery, where I cannot flash any Custom ROMs. I have no idea what to do next
kwaku85 said:
So, I have not. I have try flashing few kernels and I still have stock Recovery, where I cannot flash any Custom ROMs. I have no idea what to do next
Click to expand...
Click to collapse
Then you flash it wrongly
Sent from my Galaxy Nexus using xda app-developers app
Can You tell me why?
I'm flashing it like any other Samsung. Put in Odin kernel file, in PDA field and that's all. It's nothing dificult. Flash is going well,. but after operation I have still stock recovery.
It's log from ODIN:
<ID:0/139> Added!!
<ID:0/139> Odin v.3 engine (ID:139)..
<ID:0/139> File analysis..
<ID:0/139> SetupConnection..
<ID:0/139> Initialzation..
<ID:0/139> Get PIT for mapping..
<ID:0/139> Firmware update start..
<ID:0/139> zImage
<ID:0/139> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/139> Removed!!
Like You see, everything is ok. I have also try to flash CWM from this tutorial: http://coveringandroid.com/root-install-cwm-recovery-in-galaxy-player-5-0/ Step by step, even with latest r14 kernel. And still stock Recovery. I'm going crazy :silly:
kwaku85 said:
It's log from ODIN:
<ID:0/139> Added!!
<ID:0/139> Odin v.3 engine (ID:139)..
<ID:0/139> File analysis..
<ID:0/139> SetupConnection..
<ID:0/139> Initialzation..
<ID:0/139> Get PIT for mapping..
<ID:0/139> Firmware update start..
<ID:0/139> zImage
<ID:0/139> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/139> Removed!!
Like You see, everything is ok. I have also try to flash CWM from this tutorial: http://coveringandroid.com/root-install-cwm-recovery-in-galaxy-player-5-0/ Step by step, even with latest r14 kernel. And still stock Recovery. I'm going crazy :silly:
Click to expand...
Click to collapse
Can you attach a picture of what your recovery looks like?
Mevordel said:
Can you attach a picture of what your recovery looks like?
Click to expand...
Click to collapse
Of course:
Like I said, it's stock.
kwaku85 said:
Of course:
Like I said, it's stock.
Click to expand...
Click to collapse
That is a stock recovery, yes, but it doesn't look quite like a Galaxy Player 5 one, as we don't use BML. Anyway, look in /cache to see if there is a hidden file called ".stock_recovery" (or just try wiping cache from the stock recovery).
Please anyone who have tried to root this device please help me..i want to root this dwvice because i want to swap my memories..user available is too low..cant install hd games..thanks in advance..godbless
Sent from my SHV-E220S using xda app-developers app
You can use the Framaroot for this. I have used it and it rooted my phone with ease. Please use the version compatible for S3 or please read thoroughly the instructions. Have a great day.
Sent from my SHV-E220S using xda app-developers app
kjedznolimits said:
You can use the Framaroot for this. I have used it and it rooted my phone with ease. Please use the version compatible for S3 or please read thoroughly the instructions. Have a great day.
Sent from my SHV-E220S using xda app-developers app
Click to expand...
Click to collapse
Used it as indicated and worked!
Samsung Galaxy Pop SHV-E220s ROM Root How?
Samsung Galaxy Pop SHV-E220s
Hello guys.... I'm looking for link on how to root Samsung Galaxy Pop SHV-E220s...
Is there any Custom Rom for this device? I tried searching the web only to find nothing... i need some help...
If there's no custom rom for Samsung SHV-e220s, does the ROM for Samsung S3 will work?
How i wish to convert my SHV-e220s into local / international version...
Thanks in advance! Your help is very much appreciated...
kjedznolimits said:
You can use the Framaroot for this. I have used it and it rooted my phone with ease. Please use the version compatible for S3 or please read thoroughly the instructions. Have a great day.
Sent from my SHV-E220S using xda app-developers app
Click to expand...
Click to collapse
Framaroot doesn't work on 4.1.2 NA2. Any other suggestions?
With na2, i try to do this, install cwm recovery by SH, copy update-supersu 1.93.zip in extSdcard, boot in cwm recovery by power+home+vol up, install update-supersu 1.93.zip,reboot. Install busybox from google play. It worked!
Sent from my LG-V500 using Tapatalk
larrylong said:
With na2, i try to do this, install cwm recovery by SH, copy update-supersu 1.93.zip in extSdcard, boot in cwm recovery by power+home+vol up, install update-supersu 1.93.zip,reboot. Install busybox from google play. It worked!
Sent from my LG-V500 using Tapatalk
Click to expand...
Click to collapse
Thanks. But I suppose installing cwm recovery by SH itself requires root access!!! Any help?
whoknowshimself said:
Thanks. But I suppose installing cwm recovery by SH itself requires root access!!! Any help?
Click to expand...
Click to collapse
Install SH recovery.tar by Odin
---------- Post added at 06:29 PM ---------- Previous post was at 06:27 PM ----------
whoknowshimself said:
Thanks. But I suppose installing cwm recovery by SH itself requires root access!!! Any help?
Click to expand...
Click to collapse
No, u install SH recovery.tar by Odin only
larrylong said:
Install SH recovery.tar by Odin
---------- Post added at 06:29 PM ---------- Previous post was at 06:27 PM ----------
No, u install SH recovery.tar by Odin only
Click to expand...
Click to collapse
Thanks. Can u provide a working link to SH recovery?
I got it
It's easy.
Go to this link fsrv1.sayanogen.com/Pop and download "GalaxyPOP_CWM_SH.tar".
Install it by ODIN and reboot in Recovery Mode. Install the supersu from the sdcard and you get it.
Special thanks to sktjdgns1189.
Bruno Scog said:
It's easy.
Go to this link fsrv1.sayanogen.com/Pop and download "GalaxyPOP_CWM_SH.tar".
Install it by ODIN and reboot in Recovery Mode. Install the supersu from the sdcard and you get it.
Special thanks to sktjdgns1189.
Click to expand...
Click to collapse
Thanks. I'll try the link and let the others know the result.
Bruno Scog said:
It's easy.
Go to this link fsrv1.sayanogen.com/Pop and download "GalaxyPOP_CWM_SH.tar".
Install it by ODIN and reboot in Recovery Mode. Install the supersu from the sdcard and you get it.
Special thanks to sktjdgns1189.
Click to expand...
Click to collapse
Thanks to your comment, I've successfully rooted my Galaxy Pop SHV-E220S. Here's the instruction for everybody else:
1. First download the CWM recovery from: http://fsrv1.sayanogen.com/Pop/GalaxyPOP_CWM_SH.tar
2. Flash the file through ODIN with default configurations; import the "GalaxyPOP_CWM_SH.tar" to "AP" section of ODIN.
3. Download flashable supersu zip file.
3. Go to recovery by holding up "Volume Up + Home + Power" buttons.
4. Install the "supersu" through "Install zip from SD Card".
5. Done. You can also install busybox from market.
I successfully rooted my ND2 firmware (latest version) using this method.
whoknowshimself said:
Thanks to your comment, I've successfully rooted my Galaxy Pop SHV-E220S. Here's the instruction for everybody else:
1. First download the CWM recovery from: http://fsrv1.sayanogen.com/Pop/GalaxyPOP_CWM_SH.tar
2. Flash the file through ODIN with default configurations; import the "GalaxyPOP_CWM_SH.tar" to "AP" section of ODIN.
3. Download flashable supersu zip file.
3. Go to recovery by holding up "Volume Up + Home + Power" buttons.
4. Install the "supersu" through "Install zip from SD Card".
5. Done. You can also install busybox from market.
I successfully rooted my ND2 firmware (latest version) using this method.
Click to expand...
Click to collapse
Please can somebody help me to guide about this ODIN and AP section of ODIN. how i can run/execute these things?
and please give a link of " flashable supersu.zip " file
what about if supersu needs an already rooted device ? as mentioned here ( in RED color )
http://forum.xda-developers.com/showthread.php?t=1538053
regards.
ODIN and Flashable SuperSU
oralover2006 said:
Please can somebody help me to guide about this ODIN and AP section of ODIN. how i can run/execute these things?
and please give a link of " flashable supersu.zip " file
what about if supersu needs an already rooted device ? as mentioned here ( in RED color )
http://forum.xda-developers.com/showthread.php?t=1538053
regards.
Click to expand...
Click to collapse
Hi
The link to the flashable file or "CF-Root" is provided in the link you mentioned! look at the "download" and then "CWM / TWRP / MobileODIN installable ZIP" section at the first post. here is the link: http://download.chainfire.eu/451/SuperSU/UPDATE-SuperSU-v2.01.zip
For ODIN download and help, go to the following link. A full instruction is also provided there.
http://www.sammobile.com/firmwares/3/?download=29067
Good luck
whoknowshimself said:
Hi
The link to the flashable file or "CF-Root" is provided in the link you mentioned! look at the "download" and then "CWM / TWRP / MobileODIN installable ZIP" section at the first post. here is the link: http://download.chainfire.eu/451/SuperSU/UPDATE-SuperSU-v2.01.zip
For ODIN download and help, go to the following link. A full instruction is also provided there.
http://www.sammobile.com/firmwares/3/?download=29067
Good luck
Click to expand...
Click to collapse
Thanks whoknowshimself
will try and inform, if any problem, will ask
SuperSu: there is mentioned !!! SuperSU requires a rooted device !!! what it mean? if this SuperSu required already rooted device then how this will root any non-rooted device.
one more thing, when connecting device thru cable to PC and issuing command " adb devices " it returns " list of devices attached "
is this problem due to drivers of my device? where i can find & download drivers?
regards.
any help??
oralover2006 said:
Thanks whoknowshimself
will try and inform, if any problem, will ask
SuperSu: there is mentioned !!! SuperSU requires a rooted device !!! what it mean? if this SuperSu required already rooted device then how this will root any non-rooted device.
one more thing, when connecting device thru cable to PC and issuing command " adb devices " it returns " list of devices attached "
is this problem due to drivers of my device? where i can find & download drivers?
regards.
Click to expand...
Click to collapse
oralover2006 said:
any help??
Click to expand...
Click to collapse
Hi
Dear friend
Simply ignore the "SuperSU requires a rooted device", and you're done. I've done the same!
For Samsung mobile drivers, simply refer to the this post: http://forum.xda-developers.com/showthread.php?t=961956
With these new guides in mind, stick to the instruction and BINGO! You will have a rooted device soon! Post here your success to help the others :good:.
whoknowshimself said:
Hi
Dear friend
Simply ignore the "SuperSU requires a rooted device", and you're done. I've done the same!
For Samsung mobile drivers, simply refer to the this post: http://forum.xda-developers.com/showthread.php?t=961956
With these new guides in mind, stick to the instruction and BINGO! You will have a rooted device soon! Post here your success to help the others :good:.
Click to expand...
Click to collapse
thanks for your interest to help me.
Installed KIES from Samsung, installed Minimal ADB from xda, now adb works.
got ODIN latest version,
boot my device while pressing Home+Volume Down+Power
this shows a screen which is in Korean or Chinese
pressed Volume Up + Power
this brings device in ODIN Mode
execute ODIN, only select AP and give the file GalaxyPOP_CWM_SH.tar and press Start
it shows in small window (text box) on left side as below;
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
and reboot my device in normal mode.
I powered off my device and boot it in recovery by press Power Up + Home + Power
but when it comes in recovery, it is showing previous (actual installed) recovery because there is very few options in it.
i re-tried three times all steps but failed ...
what to do now? it showing " succeed 1 " but actually not.
.
oralover2006 said:
thanks for your interest to help me.
Installed KIES from Samsung, installed Minimal ADB from xda, now adb works.
got ODIN latest version,
boot my device while pressing Home+Volume Down+Power
this shows a screen which is in Korean or Chinese
pressed Volume Up + Power
this brings device in ODIN Mode
execute ODIN, only select AP and give the file GalaxyPOP_CWM_SH.tar and press Start
it shows in small window (text box) on left side as below;
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
and reboot my device in normal mode.
I powered off my device and boot it in recovery by press Power Up + Home + Power
but when it comes in recovery, it is showing previous (actual installed) recovery because there is very few options in it.
i re-tried three times all steps but failed ...
what to do now? it showing " succeed 1 " but actually not.
.
Click to expand...
Click to collapse
Hmmm... Seems odd. I successfully rooted NA2 and ND2. What is your current firmware version?
whoknowshimself said:
hmmm... Seems odd. I successfully rooted na2 and nd2. What is your current firmware version?
Click to expand...
Click to collapse
baseband version : E220sksand1
build number: Jzo54k e220sksand2