Related
Hey everyone, I am unable to unlock my bootloader after accepting this OTA. I just got an EVO 3D yesterday and I updated it as soon as I got it. I first checked to see if it was an HBOOT below 1.5, it wasn't so I went ahead and updated. However when i get to step 12 i believe on the htc dev site, I flash the unlock_code.bin and nothing happens just sits there. I read around and found people saying you need to take the 2.08 RUU, I tried that and when it gets to the black HTC screen I get an error 140. I was so excited to get this phone and already downloaded the rom i wanted before owning it. If someone can please help me out I would appreciate it. Thanks
No one? Dam..
Sent from my PG86100 using XDA App
majid25 said:
No one? Dam..
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Did you try factory reset or battery pull then give it another go? Also did you follow all the steps anyways give her another go.
frustrated
majid25 said:
Hey everyone, I am unable to unlock my bootloader after accepting this OTA. I just got an EVO 3D yesterday and I updated it as soon as I got it. I first checked to see if it was an HBOOT below 1.5, it wasn't so I went ahead and updated. However when i get to step 12 i believe on the htc dev site, I flash the unlock_code.bin and nothing happens just sits there. I read around and found people saying you need to take the 2.08 RUU, I tried that and when it gets to the black HTC screen I get an error 140. I was so excited to get this phone and already downloaded the rom i wanted before owning it. If someone can please help me out I would appreciate it. Thanks
Click to expand...
Click to collapse
Same here.
The same RUU I used to revert to the .2sw update to unlock two other evo3d's with hboot 1.5, will not work. Im unbelievably frustrated right now as Ive been sitting at this computer for over three hours. Please, if you find a way to downgrade your software, please let me know. thanks
not sure why you wanted to be on hboot 1.50. but shouldnt be a problem to unlock the bootloader, since it was just minor updates and still on hboot 1.50. id just try doing the process again.
i unlocked mine with unlock_code.bin that i used when i rooted my evo 3d for 1st time.....it worked fine.
Tried 5 times and failed..
Sent from my PG86100 using XDA App
evoRomz said:
not sure why you wanted to be on hboot 1.50. but shouldnt be a problem to unlock the bootloader, since it was just minor updates and still on hboot 1.50. id just try doing the process again.
Click to expand...
Click to collapse
I didn't want to be on hboot 1.5, I wanted to be below it. But when I first got my phone I checked the bootloader and was already at 1.5. If it was below that I would've been rooted right now...
to be a bit more clear it was hboot 1.5 with an OTA 2.08 when I first received the phone.
Sent from my PG86100 using XDA App
majid25 said:
I didn't want to be on hboot 1.5, I wanted to be below it. But when I first got my phone I checked the bootloader and was already at 1.5. If it was below that I would've been rooted right now...
to be a bit more clear it was hboot 1.5 with an OTA 2.08 when I first received the phone.
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
1st Check you bootloader .What it says at the top .(locked/unlocked/relocked) if it says unlocked you do not need unlock_code.bin.
Try these from step 13:
http://htcevohacks.com/htc-evo-3d-hacks/how-to-root-evo-3d-2-08-651-2-and-later-htc-unlock-method/
You can flash another recovery in step 18 .....
mnomaanw said:
1st Check you bootloader .What it says at the
http://htcevohacks.com/htc-evo-3d-hacks/how-to-root-evo-3d-2-08-651-2-and-later-htc-unlock-method/
Click to expand...
Click to collapse
That's the guide I used to HTC Unlock. Video helped. There is a post somewhere about needing to Re-flash the stock RUU.exe or Ruu.zip (renamed to PG86IMG.zip) to get the phone past the "nothing happens" step where you're supposed to get the "unlock" option screen on the phone. I haven't seen the 651.5 released as a complete RUU, but you could probably flash the 651.3 RUU, finish the HTC unlock and then run the 651.5 update. Heck, the unlock would probably work after the update, idk for sure.
I have some links and my issue with this below.
SOLVED-Stock Hboot1.50 HTC Unlock/ RUU 651.3 flash problems (1-14-12) http://forum.sdx-developers.com/?topic=18852.0
Evo3d Useful Links(md5's): http://forum.sdx-developers.com/?topic=18827.0
Edit: Here's where I saw the info about flashing the RUU to get a good unlock:
(XDA) JTniggle's [GUIDE] HTC Unlock Hboot 1.50 + TWRP Recovery + Root + Flash!! [9.11.11] (All via ADB)
http://forum.xda-developers.com/showthread.php?t=1239821
Says locked.
mpgrimm2 said:
That's the guide I used to HTC Unlock. Video helped. There is a post somewhere about needing to Re-flash the stock RUU.exe or Ruu.zip (renamed to PG86IMG.zip) to get the phone past the "nothing happens" step where you're supposed to get the "unlock" option screen on the phone. I haven't seen the 651.5 released as a complete RUU, but you could probably flash the 651.3 RUU, finish the HTC unlock and then run the 651.5 update. Heck, the unlock would probably work after the update, idk for sure.
I have some links and my issue with this below.
SOLVED-Stock Hboot1.50 HTC Unlock/ RUU 651.3 flash problems (1-14-12) http://forum.sdx-developers.com/?topic=18852.0
Evo3d Useful Links(md5's): http://forum.sdx-developers.com/?topic=18827.0
Edit: Here's where I saw the info about flashing the RUU to get a good unlock:
(XDA) JTniggle's [GUIDE] HTC Unlock Hboot 1.50 + TWRP Recovery + Root + Flash!! [9.11.11] (All via ADB)
http://forum.xda-developers.com/showthread.php?t=1239821
Click to expand...
Click to collapse
Thank your for all the help. However I tried doing what is said in these links, I ran the 2.08.651.3 RUU and at the black HTC screen I get the error 140. Can I downgrade OTA's or no? Cuz that what it looks like I have to do here.
majid25 said:
Thank your for all the help. However I tried doing what is said in these links, I ran the 2.08.651.3 RUU and at the black HTC screen I get the error 140. Can I downgrade OTA's or no? Cuz that what it looks like I have to do here.
Click to expand...
Click to collapse
I could before the .5 update. Had to get a new phone last night and it will not downgrade to the .2 software so I can then unlock. Frustrating to say the least. Actually, I'm pissed about it.
Sent from my Google Nexus S 4G via XDA Premium
How did you get a new phone, through Sprint? And yea this sucks, hope there is a solution soon I've been posting everywhere like an idiot haha
majid25 said:
How did you get a new phone, through Sprint? And yea this sucks, hope there is a solution soon I've been posting everywhere like an idiot haha
Click to expand...
Click to collapse
Yeah, returned it. Dead pixel. Now I'm stuck with this bs bloat on here cause I can't downgrade and unlock.
Sent from my Google Nexus S 4G via XDA Premium
Edit: I cant even get a damn temp root! Stuff is pissing me off. Bout to go iphone so I dont have to nerd it up and waste my damn time, which isnt even that valuable.
I say you try to just wait it out a bit. Give it a week...but don't go iPhone!!!
majid25 said:
I say you try to just wait it out a bit. Give it a week...but don't go iPhone!!!
Click to expand...
Click to collapse
At the rate devs are dropping off, a week is an eternity. And I'm new to the evo3d. Sad face.
Sent from my Google Nexus S 4G via XDA Premium
tailsthecat3 said:
Yeah, returned it. Dead pixel. Now I'm stuck with this bs bloat on here cause I can't downgrade and unlock.
Sent from my Google Nexus S 4G via XDA Premium
Edit: I cant even get a damn temp root! Stuff is pissing me off. Bout to go iphone so I dont have to nerd it up and waste my damn time, which isnt even that valuable.
Click to expand...
Click to collapse
What method did you try for temp root?
Crackanug said:
What method did you try for temp root?
Click to expand...
Click to collapse
Frevo.
Sent from my Google Nexus S 4G via XDA Premium
tailsthecat3 said:
Frevo.
Sent from my Google Nexus S 4G via XDA Premium
Click to expand...
Click to collapse
I have some tools and files for you to use that will give you temp root and allow a downgrade to 2.08.651.2 rom, hboot will still be 1.50 though. However from there you should be able to unlock via HTCdev method. I gotta upload the files and write the code which I will post up here in a second. I hope you are ok with using adb and fastboot.
So I just got the EVO 3D and am running HBOOT 1.5 and the most recent update I believe. Nothing I could do about that, it was preloaded on there.
I'm wondering if it is even worth it for me to root my phone at this point. I've seen a few people hboot 1.5 **** up their phones and i'd rather not do that. I'm no stranger to custom roms at all (I installed countless ones on my Hero) so it's not that I'm not familiar. Were the people who messed up their phones just doing stuff they shouldn't have/being stupid in general?
DjNawo said:
So I just got the EVO 3D and am running HBOOT 1.5 and the most recent update I believe. Nothing I could do about that, it was preloaded on there.
I'm wondering if it is even worth it for me to root my phone at this point. I've seen a few people hboot 1.5 **** up their phones and i'd rather not do that. I'm no stranger to custom roms at all (I installed countless ones on my Hero) so it's not that I'm not familiar. Were the people who messed up their phones just doing stuff they shouldn't have/being stupid in general?
Click to expand...
Click to collapse
Yes, it worths at least for myself. I have hboot 1.50 too and i rooted fast with no problems.
DjNawo said:
So I just got the EVO 3D and am running HBOOT 1.5 and the most recent update I believe. Nothing I could do about that, it was preloaded on there.
I'm wondering if it is even worth it for me to root my phone at this point. I've seen a few people hboot 1.5 **** up their phones and i'd rather not do that. I'm no stranger to custom roms at all (I installed countless ones on my Hero) so it's not that I'm not familiar. Were the people who messed up their phones just doing stuff they shouldn't have/being stupid in general?
Click to expand...
Click to collapse
More than likely, yes. Most users who follow the guides don't seem to have issues.
The HTC unlock method changes the dynamics a bit from previous common and accepted methods. Many "new" users become between old and current guides.
As far as I've seen, there are only three limitations to hboot 1.5, compared with early "compromised" versions using the AlphaRevX revolutionary method.
1) Kernel is not able to be flashed from recovery mode. Work arounds include: flashing from normal Android mode, my app is great for that, Flash Image GUI. Loading the custom recovery from fastboot. Flashing the kernel from fastboot. Using the "dumlock" method with TWRP.
2) Unable to selectively flash radio images
3) Unable to selectively flash intial splash screens
If I'm missing anything, I'm sure somebody else can post up.
None of those seem like deal breakers to me. Thanks for the fast replies.
It's kind of a ***** just because you have to do a few extra steps but if you know what your doing you won't screw it up.
Yarr. I think I'm going to keep stock for probably just a bit longer. Maybe 1.5 S-Off wont be a problem then. Not bored of it yet, and coming from HTC Hero the thing is a dream.
Root is the way to go Get rid of bloat Also adb isn't hard I always fastboot boot recovery.img and wipe flash no issues
Should I start a new thread on this? I tried to root my HBoot1.5 with 2.17.651.5. When I have went through the HTC unlock process it stays locked. I tried to install the 2.08 version through the original RUU, but it keeps failing. Not sure where I should go from there.
ls3mach said:
Should I start a new thread on this? I tried to root my HBoot1.5 with 2.17.651.5. When I have went through the HTC unlock process it stays locked. I tried to install the 2.08 version through the original RUU, but it keeps failing. Not sure where I should go from there.
Click to expand...
Click to collapse
I used the 2.17 from http://www.filefactory.com/f/4ef0ef536face67a/ and mine unlocked. I ran the ruu while in hboot so it didnt check my current version. When i tried the same ruu from within android it failed every time.
What did it say when you flashed the unlock token? Did you get the message on the phone screen asking if you want to unlock?
xcpefrmreality said:
I used the 2.17 from http://www.filefactory.com/f/4ef0ef536face67a/ and mine unlocked. I ran the ruu while in hboot so it didnt check my current version. When i tried the same ruu from within android it failed every time.
What did it say when you flashed the unlock token? Did you get the message on the phone screen asking if you want to unlock?
Click to expand...
Click to collapse
That is what he needs to do to fix .
Sent from my PG86100 using xda premium
DjNawo said:
Yarr. I think I'm going to keep stock for probably just a bit longer. Maybe 1.5 S-Off wont be a problem then. Not bored of it yet, and coming from HTC Hero the thing is a dream.
Click to expand...
Click to collapse
You have Hboot 1.5 with S-off?
G.Newton said:
You have Hboot 1.5 with S-off?
Click to expand...
Click to collapse
No he doesn't from what he said he is stock and asking if he should root
xcpefrmreality said:
I used the 2.17 from http://www.filefactory.com/f/4ef0ef536face67a/ and mine unlocked. I ran the ruu while in hboot so it didnt check my current version. When i tried the same ruu from within android it failed every time.
What did it say when you flashed the unlock token? Did you get the message on the phone screen asking if you want to unlock?
Click to expand...
Click to collapse
Much obliged!
DjNawo said:
So I just got the EVO 3D and am running HBOOT 1.5 and the most recent update I believe. Nothing I could do about that, it was preloaded on there.
I'm wondering if it is even worth it for me to root my phone at this point. I've seen a few people hboot 1.5 **** up their phones and i'd rather not do that. I'm no stranger to custom roms at all (I installed countless ones on my Hero) so it's not that I'm not familiar. Were the people who messed up their phones just doing stuff they shouldn't have/being stupid in general?
Click to expand...
Click to collapse
I think some people just got ahead of themselves flashing wrong files. I got a bit worried too first go round after coming from a.Transform.
In my signature I've got a guide/flashing notes that are a bit more updated than some of the stickied threads that may help clear some things up.
Sent from my PG86100 using Tapatalk
What root did you use
Sent from my EVO 3D using XDA Premium
[/COLOR]
Yoyodude1124 said:
What root did you use
Click to expand...
Click to collapse
I used the HTC Unlock (zedomax's video), CWM Recovery, Su 3.07 zip, BusyBox (market), all layed out here:
[Guide] My Hboot 1.50 HTC Unlock/recovery/rom/kernel flashing notes http://forum.xda-developers.com/show....php?t=1495358
Hey thanks again. Yeah I have the newest update, so i would need to get the 2.17 that xcp mentioned. Also, thanks for the guide above.
Hey guys....
I feel really stupid about this entire thing but I've finally decided to post here because I'm getting desperate.
The guide in question (http://forum.xda-developers.com/showthread.php?t=1563342) is fairly striaghtforward. Except the links are really scattered, at least for me. I'm on HBOOT 1.58, and I've had numerous problems even getting to the point where my phone is relocked (it's currently HTC unlocked because I use an MIUI port ROM) successfully. I would bring my problems to that thread, but I don't have 10 posts, which is a questionable rule but w/e.
Anyway, here's my problem. First, I'll tell you what I've done so far, and the problem I've come across both times.
1. Place a "2.89 RUU" or whatever onto my SD card and call it PG86IMG. This is where most of my confusion is. OP of that thread hasn't yet covered what the difference between 2.17 and 2.89 is, but my understand is that 2.17 corresponds with HBOOT 1.5 and 2.89 to 1.58. Honestly, all these numbers piss me off when there's little to no documentation of what the hell they even mean. This file is about 448 MB and my understanding was that it was a stock RUU and would make it so I could access my phone while it was still locked, which you can't do with a 3rd party ROM like the one I usually use.
2. Lock my phone's bootloader. I just did fastboot oem lock in Windows and it rebooted to *** RELOCKED *** *** Security Warning ***. Apparently this is normal, and now I need to flash said RUU.
3. Flash the RUU. This took an EXTREMELY long time, and it went through Loading PG86IMG.zip.. then to some other stage that took much less time to complete. After that it just sits in the bootloader.
Here's my concern... I can't access my SD card. Why? Because I can't even get out of the bootloader or fastboot. All it does is sit here, and since I can't remove the update file PG86IMG.zip, if I try to enter recovery (which I'm sure won't work anyway) it will try to start loading that file again. I don't really know what step I missed here, but it's probably because I'm fairly clueless when it comes to this stuff, lol.
So, I did this once, and then I waited about 6 hours for HTCdev's site to stop crashing so I could unlock my phone again. Made it through a school day with my old ROM and stuff, deleted the update files so they wouldn't run again, etc. etc.
Now, I'm doing it again today with this new 2.89 RUU or whatever and the same exact problem is happening. So now I'm at a stage where my phone is entirely useless until HTCdev.com starts actually sending e-mails. I swear, these crashes on HTCdev's part could not be more untimely.
So basically, what am I doing wrong with relocking my phone? OP implies that I should be able to start my phone (not the bootloader, but actually start it) because they ask after you've supposedly re-locked the bootloader for you to move a new PG86IMG.zip file onto your SD card, which I'm unable to do because my phone can't get out of fastboot/bootloader screen. That's the next step, which is actually doing the downgrading.
And yes, I know that it's possible for HBOOT 1.58 because someone else already did it (last post in the thread).
At this point, I don't really care when I get it to work, man. This is proving to be such a gigantic pain in the ass just to install a new Jelly Bean ROM. I JUST WANT JELLY BEAN!
If anyone can send a noob in the right direction, that'd be great. I have all week and all weekend, but I've run out of time to waste on this for today. I guess most of what I need is to know what files I'm supposed to be downloading, because I have a feeling that's most of what I'm getting wrong.
I hope I've explained my problem well enough, and thanks a ton to anyone who just suffered through reading my essay and can offer help. I'll be sending this to OP of the guide as a PM so hopefully if none of you guys can help they can.
Thanks a ton everyone, I just want to get Jelly Bean on my phone and stop dealing with MIUI :laugh:
Update: Found this thread: http://forum.xda-developers.com/showthread.php?t=1495358. I believe this will probably help me out a lot! Wish I would've seen it sooner.
TL;DR: Need better explanation of how to relock 1.58 hboot bootloader with a stock rom, and where to find the rom.
Honestly, your post was tl;dr for me, but I think you would be best served to follow ramjet's guide to s-off. It's really the easiest and includes everything you need.
http://forum.xda-developers.com/showthread.php?t=1889438
coal686 said:
Honestly, your post was tl;dr for me, but I think you would be best served to follow ramjet's guide to s-off. It's really the easiest and includes everything you need.
http://forum.xda-developers.com/showthread.php?t=1889438
Click to expand...
Click to collapse
Lol. I'm not surprised. I tend to pour my heart out on forums when I get to the point of desperation.
Gonna be honest with you, zero interest in the wire tap method. Zero. Not trying it. Not even going to think about it. Sorry, I appreciate the idea but honestly screw that.
Logic33 said:
Lol. I'm not surprised. I tend to pour my heart out on forums when I get to the point of desperation.
Gonna be honest with you, zero interest in the wire tap method. Zero. Not trying it. Not even going to think about it. Sorry, I appreciate the idea but honestly screw that.
Click to expand...
Click to collapse
Then, honestly, you are EXTREMELY limited as to what you can do. S-Off is your best bet. Good Luck.
raptoro07 said:
Then, honestly, you are EXTREMELY limited as to what you can do. S-Off is your best bet. Good Luck.
Click to expand...
Click to collapse
I don't understand how that limits me at all. I just want to use the downgrade method to hboot 1.4 and s-off. I never had any intention of staying on hboot 1.5, and certainly not hboot 1.58.
Logic33 said:
I don't understand how that limits me at all. I just want to use the downgrade method to hboot 1.4 and s-off. I never had any intention of staying on hboot 1.5, and certainly not hboot 1.58.
Click to expand...
Click to collapse
From my understanding, the downgrade method works with hboot 1.58, but you have to brick your phone twice. But it really is the more challenging method so you may want to reconsider your stance on the wire trick. I've yet to hear of an unhappy customer who followed ramjet's guide.
coal686 said:
From my understanding, the downgrade method works with hboot 1.58, but you have to brick your phone twice. But it really is the more challenging method so you may want to reconsider your stance on the wire trick. I've yet to hear of an unhappy customer who followed ramjet's guide.
Click to expand...
Click to collapse
I'm not sure.
However, this thread can be closed because I *finally* got the RUU to work properly! I was doing things in the wrong order, and not using the .exe was a silly idea. It's much easier that way. Currently have stock ROM running on a locked 1.58 hboot. Now I can continue!
Logic33 said:
I'm not sure.
However, this thread can be closed because I *finally* got the RUU to work properly! I was doing things in the wrong order, and not using the .exe was a silly idea. It's much easier that way. Currently have stock ROM running on a locked 1.58 hboot. Now I can continue!
Click to expand...
Click to collapse
Good! :thumbup:
Keep posting questions, we'll do our best to help.
coal686 said:
Good! :thumbup:
Keep posting questions, we'll do our best to help.
Click to expand...
Click to collapse
LOLJK. I swear, at this point HTC must be trolling me. It's loaded up now. Thanks for trying to help everyone! I can't wait to get Jelly Bean on here soon!
Doubt this will help, but did you remove the PG86IMG.zip from your sd card? Also, did you run the ruu.exe while in bootloader (it will say fastboot usb in red). I'm sort of grasping at straws since the ruu usually works without issue when using the exe.
coal686 said:
Doubt this will help, but did you remove the PG86IMG.zip from your sd card? Also, did you run the ruu.exe while in bootloader (it will say fastboot usb in red). I'm sort of grasping at straws since the ruu usually works without issue when using the exe.
Click to expand...
Click to collapse
I have a feeling you didn't see my update It magically decided to work. Here comes double bricking action... this should be (un)fun D:
i am on hboot 1.58 and used HTC Unlock and wire trick to get s-off. i was about to flash a JB Rom but realized that it requires hboot to be lower than 1.58. so all i do is pick the first hboot 1.40 from Here, put it in the root of SD, boot up the phone in recovery and flash that PG86IMG.zip.
once its done ill swap the SD with another one which would have the ROM i want to install, then boot again in recovery and wipe Dalvik+cache, and then flash ROM?
am i doing it right?
thank you.
chubaan said:
i am on hboot 1.58 and used HTC Unlock and wire trick to get s-off. i was about to flash a JB Rom but realized that it requires hboot to be lower than 1.58. so all i do is pick the first hboot 1.40 from Here, put it in the root of SD, boot up the phone in recovery and flash that PG86IMG.zip.
once its done ill swap the SD with another one which would have the ROM i want to install, then boot again in recovery and wipe Dalvik+cache, and then flash ROM?
am i doing it right?
thank you.
Click to expand...
Click to collapse
No, do it from the bootloader
Sent from my skz_tenderloin using xda premium
fdavila17 said:
No, do it from the bootloader
Sent from my skz_tenderloin using xda premium
Click to expand...
Click to collapse
I have the exact situation with my wife's phone? I want to install Pacman on her phone which is still stock. Is all I have to do what chubaan said?
ruckstande said:
I have the exact situation with my wife's phone? I want to install Pacman on her phone which is still stock. Is all I have to do what chubaan said?
Click to expand...
Click to collapse
Just download the hboot you want, 1.50 or below to get PACMAN to.boot, rename it as PG86IMG.zip place it on the root of your sd card, go to.the bootloader and select yes to apply update , and your done
Sent from my PG86100 using xda premium
Thank you.. that's what I did. And after you're done make sure to wipe dalvik and cache from recovery, at least in my case I had to. And then flash the rom. And that's it..
Sent from my PG86100 using XDA Premium App
Hello everyone Im hoping someone can help me with a problem I'm having :/ . I want to go back to stock but I can't find the right ruu. I got a refurbished phone from VM and it came with 1.58 and radio 1.09 and flashed the nega rom but I want to go back to stock but everytime it says error when trying to ruu the phone. Can someone help me find the right ruu or tell me what I'm doing wrong? Ohh and I'm s-on.
Anyone? im almost crying of how fed up trying to find the problem ! :/ i cant find the fastboot drivers for the phone either
fabyprado123 said:
Hello everyone Im hoping someone can help me with a problem I'm having :/ . I want to go back to stock but I can't find the right ruu. I got a refurbished phone from VM and it came with 1.58 and radio 1.09 and flashed the nega rom but I want to go back to stock but everytime it says error when trying to ruu the phone. Can someone help me find the right ruu or tell me what I'm doing wrong? Ohh and I'm s-on.
Click to expand...
Click to collapse
There is no RUU available yet that will work with the 2.95 update installed which is apparently how you go the phone. You can either get S-OFF and then flash the original RUU and take the two OTA updates, or try flashing one of the stock ROM's in this post. If you want to go back to almost 100% stock and unrooted you will need to flash the unrooted version of the stock ROM and then flash the stock recovery.
The one thing that won't be stock in that scenario is the bootloader since if you lock it the status will show "relocked" rhater than "locked".
ramjet73
I want to thank you for replying !!! ive seen many posts and you are like a god of the Htc evo 3d ! Im trying to get s off with jbear but i get the error message " connect device and install drivers" i think it might be the fastboot but not sure can you help me with that?
fabyprado123 said:
I want to thank you for replying !!! ive seen many posts and you are like a god of the Htc evo 3d ! Im trying to get s off with jbear but i get the error message " connect device and install drivers" i think it might be the fastboot but not sure can you help me with that?
Click to expand...
Click to collapse
You need to install the HTC drivers. Which version of Windows are you using?
Getting S-OFF with hboot 1.58 installed is still uncharted territory for VM users. I suggest you check out the related threads in this forum and post there for help since there are a lot of Evo V 4G users there that can help. They are actually looking for someone in your situation who is willing to try getting S-OFF so I'm sure you will get lots of help.
ramjet73
will do ive tried installing random drivers i find for the evo 3d but dont work :/ do you know where to put the folder for the drivers? thank you so much for your help btw
Dude !! I finally got s-off !!!
fabyprado123 said:
Dude !! I finally got s-off !!!
Click to expand...
Click to collapse
Great!
How did you do it?
ramjet73
I flashed viper Rom (don't remember which one) and that gave me stock kernel. Then, I downloaded a .zip file with the drivers to the phone and used the jbear program to s-off. Then , I put 1.04.200 hboot and used the ruu to bring me back to stock. Updated my phone and I am all good. If I get all the folders together might make a tutorial on how to get s-off even after taking the OTS updates on s-on. Or prob. You can hel0 me ramjet73?
Sent from my HTCEVOV4G using xda app-developers app
fabyprado123 said:
I flashed viper Rom (don't remember which one) and that gave me stock kernel. Then, I downloaded a .zip file with the drivers to the phone and used the jbear program to s-off. Then , I put 1.04.200 hboot and used the ruu to bring me back to stock. Updated my phone and I am all good. If I get all the folders together might make a tutorial on how to get s-off even after taking the OTS updates on s-on. Or prob. You can hel0 me ramjet73?
Click to expand...
Click to collapse
Well, we already have guides on both XDA and androidforums.com and the unlimited.io developers that created JuopunutBear have gotten very sensitive about having instructions posted in other places.
I'm curious how you did the wire trick since the Windows downloads are no longer on the unlimited.io website. Did you use an existing guide? At this point we are just trying to figure out what is the best version of JBear to use after VM users have installed the March OTA and have hboot 1.58.
ramjet73
I'm not sure ? I have the folder though , I can send it to you and you can take a look at it?
Sent from my HTCEVOV4G using xda app-developers app
fabyprado123 said:
I'm not sure ? I have the folder though , I can send it to you and you can take a look at it?
Click to expand...
Click to collapse
Yea, just for the jbear portion. I'd appreciate it if you can zip it up and upload it to dropbox or similar and PM the link to me.
As I said, at this point we are just trying to determine which jbear version works best with the Evo V updated to the March OTA and hboot 1.58. If the most effective process warrants a new guide I will be happy to work with you on that.
ramjet73
Program I used to S-OFF
I dont think its letting me send the link to the program i used. Can I post it here?
Hello, I desperately would like to see how to put my HTC Amaze back to stock. A couple of months ago I tried putting it back to stock because the energy rom kept rebooting on me and draining my battery life randomly. Anyways I was not successful and so I just kept the rom and the rebooting problems stopped anyways. Now, its happening again and I would really love for some one to help me get it back to stock so I can see if it improves and maybe get the thing S-OFF later. I am with Wind mobile.
Any help is greatly appreciated,
A frustrated amaze user.
rspierz said:
Hello, I desperately would like to see how to put my HTC Amaze back to stock. A couple of months ago I tried putting it back to stock because the energy rom kept rebooting on me and draining my battery life randomly. Anyways I was not successful and so I just kept the rom and the rebooting problems stopped anyways. Now, its happening again and I would really love for some one to help me get it back to stock so I can see if it improves and maybe get the thing S-OFF later. I am with Wind mobile.
Any help is greatly appreciated,
A frustrated amaze user.
Click to expand...
Click to collapse
Well since you're s on lock your bootloader and flash a wind ruu from bootloader you can find the necessary thread in development section
Sent from my HTC_Amaze_4G using xda premium
ravike14 said:
Well since you're s on lock your bootloader and flash a wind ruu from bootloader you can find the necessary thread in development section
Sent from my HTC_Amaze_4G using xda premium
Click to expand...
Click to collapse
Hey thanks for the response. So I locked the bootloader and then got the wind RUU renamed it as PH85img.zip or w/e its supposed to be. And now when in the boot screen it cannot find my file I then tried another RUU but this time is used the exe wind one but that one failed as well and came up as an error saying the hboot version is older then what im flashing or something?
So I am stuck at this point. Do you know how to get around this?
Make sure the ruu is on the root of the sd card
Sent from my SGH-T999 using Tapatalk 2
rspierz said:
Hey thanks for the response. So I locked the bootloader and then got the wind RUU renamed it as PH85img.zip or w/e its supposed to be. And now when in the boot screen it cannot find my file I then tried another RUU but this time is used the exe wind one but that one failed as well and came up as an error saying the hboot version is older then what im flashing or something?
So I am stuck at this point. Do you know how to get around this?
Click to expand...
Click to collapse
well you cant flash a exe you have to connect your phone to the pc and run the exe from pc and bout the hboot whats your current version? :/
ravike14 said:
well you cant flash a exe you have to connect your phone to the pc and run the exe from pc and bout the hboot whats your current version? :/
Click to expand...
Click to collapse
Yeah it was connected via usb. I got somewhere, now but im am hoping you can tell me what i need to do now. I followed the second post here : http://forum.xda-developers.com/showthread.php?t=2167596 and now I have GB rom on my phone running unlocked. What do I need to do from here so I can S-off and super CID? PS I tried doing an OTA update from the phone and it wont work.
Looking into the S-off guide it says i must be on a stock RUU. is the one i got install a stock RUU. Also my hboot version is 1.93.0002 (Mar 15 2012) which is ice cream sandwich according to the Unlimited.IO site, but the RUU im on is definitely gingerbread. What can I do about this?
rspierz said:
Looking into the S-off guide it says i must be on a stock RUU. is the one i got install a stock RUU. Also my hboot version is 1.93.0002 (Mar 15 2012) which is ice cream sandwich according to the Unlimited.IO site, but the RUU im on is definitely gingerbread. What can I do about this?
Click to expand...
Click to collapse
What is your android version in settings?? Cuz what your telling is kinda weird
Sent from my HTC_Amaze_4G using xda premium
Adroid Version: 2.3.4
HTC Sense version: 3.0
Software number 1.43.531.3
am I completely screwed now? Cause it seems i wont be able to get S-off or CID off while not on this unsigned rom (t-mobile), i am with Wind. The OTA does not work while on the phone (settings > software update). Would locking my bootloader and then loading the latest OTA zip from wind on the SD card work? I am very stuck!
rspierz said:
am I completely screwed now? Cause it seems i wont be able to get S-off or CID off while not on this unsigned rom (t-mobile), i am with Wind. The OTA does not work while on the phone (settings > software update). Would locking my bootloader and then loading the latest OTA zip from wind on the SD card work? I am very stuck!
Click to expand...
Click to collapse
well you have ginger bread so try the jbear GB s off tool in ubuntu
but what about the hboot version being ICS? Do you think it should still work?
rspierz said:
but what about the hboot version being ICS? Do you think it should still work?
Click to expand...
Click to collapse
what bout your CID?
I havent done anything to the CID, so I believe it is still locked to wind?
rspierz said:
I havent done anything to the CID, so I believe it is still locked to wind?
Click to expand...
Click to collapse
well choice is yours your android version says GB hboot says ICS :/ i say try the GB s-off tool but do at your own risk...
well S-Off worked so thats good haha. Now i am trying to super CID. However, when uploading the proper hboot for doing so it wont let me because of the CID.
Ignore that last post. I figured it out so all is good. Now here is another question, should i flash CM10.1 or your rom that viper one? How would I go about flashing a rom. I remembered before you would just go into recovery and then format all execpt sd card and then install from zip. I tried that with the CM10.1 rom and when I rebooted it did not work.
went ahead and tried installing the Viper rom and after i reboot (when it said all was good) it show a black screen with green arrows. And its stuck on that. I do not know what to do now. Because I should have everything open. Was I supposed to flash something after doing the S-OFF?
This is what I am getting stuck on. I tried another rom too, same thing. I can boot into 4ext. But cant get past this on boot up.
rspierz said:
This is what I am getting stuck on. I tried another rom too, same thing. I can boot into 4ext. But cant get past this on boot up.
Click to expand...
Click to collapse
Now your s off BUT you have gb firmware so you have to flash a ruu 1st then flash a recovery then supersu or just flash any rom you want if you decide to stay with the ruu stock rom to gain root permission flash supersu
Sent from my HTC_Amaze_4G using xda premium