I had this working fine on my N1. If my phone was connected to my car's Bluetooth stereo, the audio from the video call would go through the stereo and I'm pretty sure my voice would go through the stereo's mic.
However, on my S2 it insists on going through the speaker. Anyone know why?
I should mention that it goes through headphones properly.
Related
ok we all have our lovely toys and are all connected with cingulars awesome high speed internet. some of us are probly saving mins by using skype calls. well thats what i do any ways. i picked up a plantronics 855 stereo and mono bluetooth headset. in mono mode it also supports a2dp so it seemed like u can use it to do skype calls but turns out that a2dp doesnt turn on the mic, so ur dependent on the mic on the unit instead of the headset. does anyone know how to get a2dp and have the mic on too. skype calls are saving me a fortune but cant always have my ear up to my beautiful phone ((( people tend to stare at u when u got a umpc like device up to your ear)))
henvanvo said:
ok we all have our lovely toys and are all connected with cingulars awesome high speed internet. some of us are probly saving mins by using skype calls. well thats what i do any ways. i picked up a plantronics 855 stereo and mono bluetooth headset. in mono mode it also supports a2dp so it seemed like u can use it to do skype calls but turns out that a2dp doesnt turn on the mic, so ur dependent on the mic on the unit instead of the headset. does anyone know how to get a2dp and have the mic on too. skype calls are saving me a fortune but cant always have my ear up to my beautiful phone ((( people tend to stare at u when u got a umpc like device up to your ear)))
Click to expand...
Click to collapse
Yes, there is a problem with mic in stereo headsets. I have Jabra mono headset and another Jabra stereo one.
If I use my mono Jabra, I can use BT Audio to redirect all audio including mic to the headset. Unfortunatelly this does not work with my stereo Jabra (320s). If I try to use BT Audio while using Jabra 320s, something strange happens and the audio system gets crazy, it usualy does not transmit any audio or gets stucked completly. That is why, if I have my Jabra 320s on, I simply use it as audio in, and the standard mic in X7500 for my VoIP. It works well and prevents against the echo effect. The mic in X7500 is very good, so I can keep it in normall distance of about 50 cm from my face. I use Aget phone for my VoIP, but it works with SJPhone as well.
Edit:
I have made my Jabra 320s (stereo) to provide mic in VoIP. I have unclicked the "Wireless Stereo" option in Bluoetooth settings og the headset. After this BT Audio works well and does not create any problems.
Now the only issue I have is to find some software which could work like BT Audio but from command line. I use Aget phone which can be set to start any software with command line, just before and after the call. This could be easily used to send audio with mic to BL headset just before the call and then return it to standard settings after the call.
Any clues...?
I just experienced a bug. I got in mij car, enabled bluetooth and stared the enging. I could hear the touch cruise connect to the parrot bluetooth carkit (usually it beeps twice, now it beeped 4-5 times).
I fired up my TomTom, instructions were given over the speakers of my car stereo (via carkit)!! I did some testing with other audio files, all worked over speakers.
Quality wasn''t sufficient for audio, but e-books and podcasts sounded good enough.
After a few minutes of playing arround I received a call, after hanging up the call the usual way on the carkit shut down the possibility to hear audio over the car speakers.
Anybody know a way to force audio over the car speakers through the handsfree??
Try this tool:
it sends all the audio signals to the headset (or BT Carkit)
Would it be possible to switch bluetooth audio on just when there is a sound to play, cause it seems a little bit useless to hear nothing when my navigation has nothing to say..
How do I get all audio on my Verizon Touch Pro to play through my bluetooth earpiece?
With my Motorola Q, I connected the bluetooth device, it changed to a Headset profile and all audio (tcpmp, windows media, etc) played through the bluetooth device.
When I connect the same bluetooth earpice to my Touch Pro, the only time it activates is if I hit voice command or once a call is connected.
I also have bluetooth stereo headphones with that stereo profile and those do get audio from Windows Media player.
How do I get audio from TCPMP/Windows Media to play through the Hands Free profile that the bluetooth earpieces I have use?
Anyone able to help with this? I'm disappointed that I can't listen to audio through a bluetooth headset with the hands-free profile.
There has to be a simple fix.
Tap and hold the name of the headset and tap 'Set as Wireless Stereo.'
That option is grayed out for my mono headsets.
Any other ideas?
lexluthor said:
That option is grayed out for my mono headsets.
Any other ideas?
Click to expand...
Click to collapse
that is because your headset is not a2dp. what you did before was just have the crappy audio go across your headset without true a2dp so the sound was pretty bad. i have jabra bt8010 and sometimes i have to refresh the option on my headset to set wireless stereo. if i don't, the audio is piss poor because i'm just piggy backing ontop of the voice command audio stream.
sidwin said:
that is because your headset is not a2dp. what you did before was just have the crappy audio go across your headset without true a2dp so the sound was pretty bad. i have jabra bt8010 and sometimes i have to refresh the option on my headset to set wireless stereo. if i don't, the audio is piss poor because i'm just piggy backing ontop of the voice command audio stream.
Click to expand...
Click to collapse
Yes, I understand that.
But, my question is how can I get audio to come through my mono bluetooth headset when it's connected? On my Motorola Q, ALL audio routed through the headset when it was connected. On the TP, only if I start voice command or make a call does audio get sent to the headset.
I use the headset to listen to podcasts, so that's what I'm looking for.
I did find a program that would route all audio through the headset, but I do have to run it each time I connect the headset. I suppose that will suffice though.
is there anyway to get the satnav to interupt your cars headunit the same way that a call does.
i.e im listening to my headunit (fm radio) in car. infact no matter what source i'm listening to if a call comes in the source is interupted and the call can be auto answered.
but when satnav has an instruction to give it does not interupt the headunit source! to get the satnav voice over you have to be in bluetooth audio mode!
while playing audio from your phone mp3 etc to the headunit satnav will over voice it. i thought i found the solution by having the radio on my phone on playing through bluetooth audio but it won't let you it only has the ability to play through wired headset or speaker!
fix?
i must add. yes i realise the wired headset acts as the radio antenna. so what i want is the wired headset plugged in = antenna but sound to go through bluetooth
I got in on the Samsung WEP470 deal at NewEgg to use with my G Tab. But in testing it, I've noticed that it will pair, no worries, but it won't connect.
My goal is to use it to replace the rubbish internal mic for skype calls when my daughter is traveling.
Any ideas? Does anyone have a BT earpiece that does connect and can work for calling?
Thanks!
--mop
I have Motorola S7HD stereo bluetooth headset and it pairs and works great with my G Tab running latest TnT Lite. I use them to listen to pandora, and watch tv/movies from my media server using plugplayer. I haven't tested yet for video conferencing, but it should work for that too. I'm too lazy to convert my Skype friends to oovoo or whatever it is, I'm hoping Skype will just finally add video to Android Skype soon.
Good luck.
MC
Only A2DP Bluetooth
I have a Plantronics Blackbeat 903 which also works perfect for listening (through A2DP), but that's all I've been able to achieve. I mean, I can not make it work as audio input, just output. I guess g tab doesn't have the hands-free (HFP), or headset (HSP) Bluetooth profiles required to do that. So, even though I have Skype installed and I can make calls and listen via bluetooth, the built-in mic is still being used during the call instead of the Bluetooth headeset mic.
I've been googling around and still have found nothing about whether that functionality can be enabled. If you guys find something, let me know.
Anyone have BT headset/microphone combo that works?
jeanux said:
I have a Plantronics Blackbeat 903 which also works perfect for listening (through A2DP), but that's all I've been able to achieve. I mean, I can not make it work as audio input, just output. I guess g tab doesn't have the hands-free (HFP), or headset (HSP) Bluetooth profiles required to do that. So, even though I have Skype installed and I can make calls and listen via bluetooth, the built-in mic is still being used during the call instead of the Bluetooth headeset mic.
I've been googling around and still have found nothing about whether that functionality can be enabled. If you guys find something, let me know.
Click to expand...
Click to collapse
I have a Rocketfish RF-MAB2 stereo headset that works for audio output but not microphone input (works ok on my blackberry tour). Just tried Sipdroid and while I could hear fine, audio was definitely going through the microphone on the G-Tablet ("sounds like you are under-water").
Bummer. I would like to be able to hear and talk through this set of headphone/microphone. My Emerson EM227 will pair but not connect. Is this an issue where the proper bluetooth stack isn't present?