Sorry I'm new so was wondering if anyone could relay or respond. I can't seem to get any wifi tethering to work on Synergy r345.
Same...I was wanting to use the synergy ROM but after I flashed USB tethering was not working and neither was the hotspot it said I was not subscribed.
I am using Steel's ROM for now.
are you guys using cwm 4.0.1.4 recovery
ivan1.ruiz said:
are you guys using cwm 4.0.1.4 recovery
Click to expand...
Click to collapse
using TWRP
using cwm cuz i have no other choice (htc official root) and wifi is borked.
can someone confirm changes to the new Synergy release?... is the 3G/4G notification gone? Also no settings access in the notification dropdown?
Your different things may not work if you are using a 2.3.3 ROM with a device that got the new OTA. Also 2.3.4 ROMs only work with the new kernels or stuff won't work.
Sent from my HTC Hero making C.R.E.A.M.
Did you unlock with the HTC unlock? If so I do not think its allowing to flash a kernel. It appears to flash but it doesn't. Is the rom you're trying to flash a 2.3 rom? If so try flashing a kernel and seeing in settings if it actually changed. (If you used HTC to unlock that is) wifi was borked on my buddy's phone (used HTC unlock) with any 2.3 rom.
Sent from my PG86100 using XDA App
no, I used revolution for the unlock... I'm just guessing it's the new 2.3.4 I'll just wait it out a week or 2 and see what happens.
Ditto here. Flashed Synergy earlier today, and no wifi (specifically WPA2). It acts like it's going to connect and then just drops. I've tried the "gingerjane" kernel and Dream Kernel, and none work (and I did verify in the Settings that the kernel had properly been installed). I've even tried flashing different radios just for kicks.
This sucks
Flash the newest Synergy build, both wifi and usb tethering are working now. You will have to be familiar with svn, there is a guide on the second post I believe. Or you can wait for somebody to upload the revision 381. Then you can grab it and flash away.
Related
Hey guys,
2 days ago I flashed the latest Fusion 2.2 ROM and started to have wifi problem (unable to start wifi) or it would connect and immediately disconnect and all the wifi hotspot would disappeared as well. I know its not the ROM's fault cuz I've tried 4 other ROM's trying to figure out how to fix this, but since I have no skillz what so ever other then flashing roms (if you consider this a skill...lol)
Can my wifi be fried? or else???
Thanks in advance for your help!
Seems strange. You tried 2.1 ROMS as well as Froyo?
pulser_g2 said:
Seems strange. You tried 2.1 ROMS as well as Froyo?
Click to expand...
Click to collapse
Yes, 2.1 VanillaEclair 4.0 & 5.0
Froyo, Cronos 2.2 ROM and Fusion ROM...
I've even gone back to my original 1.5 ROM and it still the same! I also flashed 3 different Radio ROM and it doesn't change anything!
Now most of the time it can't even find any wifi spots!
What about changing the radio maybe?
Sent from my HTC Hero using XDA App
Kukussi said:
Yes, 2.1 VanillaEclair 4.0 & 5.0
Froyo, Cronos 2.2 ROM and Fusion ROM...
I've even gone back to my original 1.5 ROM and it still the same! I also flashed 3 different Radio ROM and it doesn't change anything!
Now most of the time it can't even find any wifi spots!
Click to expand...
Click to collapse
Tried as I stated above! Nothing changed!
Further more I'v flashed all GSM radio ROM and still my wifi gives me either a "error" "unable to start wifi" or disconects a second after it connected!
I hope you dev's can help me out!
Anyone? Sucks Im using only my data and it will cost me a lot... (i need internet access all the time)
Sent from my Hero using XDA App
shoot…same happening here! So its either the 2.2 rom or the wifi tether fried it!
I have just rooted my Thunderbolt and I am looking to install a rom. Das Bamf looks great. I have experience flashing roms on my OG Droid. However I never had to flash any radios. What radios will work/recommended for Bamf? And Do I need to install the 1.7 first then the remix or is the remix a full rom? How do I install the custom lock screens?
You should not have to flash a radio with 1.7 it comes packaged with everything you need. Do a backup, wipe, and flash the new rom.
Sent from my ADR6400L using Tapatalk
same you would a radio. download the zip to your sd card and install it from recovery. When i first installed BAMF, i installed the first or second radio in the radio thread. I had reboots since day one. Then i tried the 3rd radio which i think is old cdma version/new lte version, i still got reboots but not as many. i then went to GB, but went back to Froyo on the news that came out. When i went back, to Froyo, i installed the 4th radio in the thread, which i believe is old cdma version/old lte version. i have not had any reboots since i have gone back. so my recommendation would be to go with the fourth radio.
So still a little confused. If I download 1.7 from rom manager it will flash the radio for me as part of the flash rom step or I need to flash the radio first then install the rom with rom manager?
Also a little help with themes too (see above )
Sent from my ADR6400L using XDA App
Radios are flashed separately through HBoot, not through recovery. The radios are also not part of the Das Bamf rom. However, the stock radio should work with Das Bamf. There's a separate radio thread here that has some combinations. Do not flash the Gingerbread radio until you read more about the subject. I'm using the second radio listed in that thread, the .7 CDMA radio with the .6 LTE radio(No reboots since I switch to that combo). The instructions for flashing a radio can be found here.
As for Das Bamf, I would recommend downloading it from the thread and loading it manually through recovery instead of going through ROM Manager. Although I've used ROM Manager successfully in the past, many people have had various problems with using it to flash ROMs.
FreemanB said:
I'm using the second radio listed in that thread, the .7 CDMA radio with the .6 LTE radio(No reboots since I switch to that combo).
Click to expand...
Click to collapse
how did you come to find this one was the best? testing? lucky guess?
any steps i can take to determine which radio is best for me?
martin_nj said:
how did you come to find this one was the best? testing? lucky guess?
any steps i can take to determine which radio is best for me?
Click to expand...
Click to collapse
Nothing scientific about it, I just saw someone else say that they stopped getting the random reboots after switching to that particular combo.(The theory was that they were related to the .7 LTE radio) I decided to give it a shot, and I haven't had a random reboot since switching a few weeks ago. I'd say go with that combo until you have a reason to switch to something else due to either problems or newer versions being released.
Thx for the help! If I have a problem which one is the Stock radio. I ask because my og Droid had a touch screen issue and I had to un root it. Will all the extra steps in these time and rooting procedures it is confusing. If I use the auto un root will it reinstall the stock OS and radio along with un rooting and s-on
Sent from my ADR6400L using XDA App
disa5080 said:
I have just rooted my Thunderbolt and I am looking to install a rom. Das Bamf looks great. I have experience flashing roms on my OG Droid. However I never had to flash any radios. What radios will work/recommended for Bamf? And Do I need to install the 1.7 first then the remix or is the remix a full rom? How do I install the custom lock screens?
Click to expand...
Click to collapse
I've had no problems on BAMF stripped 1.1 and 1.7 on both the release and newest radios.
Tried to flash BAMF 2.0.5
Flashed the first radio in the list of radio's booted back into froyo and it worked fine, flashed BAMF 2.0 Beta 5 and got alot of HTC force close. One was sync and I'm assuming another was the software that activates the phone. After getting to a WIFI, I signed into google and got to the dialer and tried *228 and it told me that I needed to install a sim card. Sim Card was installed! I freaked out and restored a recovery of the stock rom rooted and have no problem getting a signal.
1.) What did I do wrong, do I just need to install one of the other radio's?
2.) When I recover, did it also revert back to the radio that was installed when I did the backup (stock)?
I am a first time HTC flasher!! )) I had a OG that I ran Bugless Beast and many others on, a droid x that ran the gingerbread leak. Maybe I should just be happy to be rooted and on Froyo but I couldn't stay away from Gingerbread after having it on the Droid X. Thanks in advance for your help!!
djenks24 said:
Flashed the first radio in the list of radio's booted back into froyo and it worked fine, flashed BAMF 2.0 Beta 5 and got alot of HTC force close. One was sync and I'm assuming another was the software that activates the phone. After getting to a WIFI, I signed into google and got to the dialer and tried *228 and it told me that I needed to install a sim card. Sim Card was installed! I freaked out and restored a recovery of the stock rom rooted and have no problem getting a signal.
1.) What did I do wrong, do I just need to install one of the other radio's?
2.) When I recover, did it also revert back to the radio that was installed when I did the backup (stock)?
I am a first time HTC flasher!! )) I had a OG that I ran Bugless Beast and many others on, a droid x that ran the gingerbread leak. Maybe I should just be happy to be rooted and on Froyo but I couldn't stay away from Gingerbread after having it on the Droid X. Thanks in advance for your help!!
Click to expand...
Click to collapse
Das BAMF 2.0 Beta #5 REQUIRES a Gingerbread radio, not a Froyo radio.
The banf 2.0 needs a gingerbread radio. The radio currently is causing bricks. Go back to froyo!
Sent from my ADR6400L using XDA App
ProTekk said:
Das BAMF 2.0 Beta #5 REQUIRES a Gingerbread radio, not a Froyo radio.
Click to expand...
Click to collapse
Thanks for the quick reply, I must have downloaded the wrong one, I used the link for the radio from the Das BAMF 2.0 Thread. Thanks for the help, I'll try again.
What what
Sent from my ADR6400L using XDA App
What what in the
Sent from my ADR6400L using XDA App
What what in the butt. I said what what in the butt.
Sent from my ADR6400L using XDA App
What what.
Sent from my ADR6400L using XDA App
FreemanB said:
Radios are flashed separately through HBoot, not through recovery. The radios are also not part of the Das Bamf rom. However, the stock radio should work with Das Bamf. There's a separate radio thread here that has some combinations. Do not flash the Gingerbread radio until you read more about the subject. I'm using the second radio listed in that thread, the .7 CDMA radio with the .6 LTE radio(No reboots since I switch to that combo). The instructions for flashing a radio can be found here.
As for Das Bamf, I would recommend downloading it from the thread and loading it manually through recovery instead of going through ROM Manager. Although I've used ROM Manager successfully in the past, many people have had various problems with using it to flash ROMs.
Click to expand...
Click to collapse
Excellent post. I flashed to 1.7 today through Recovery as well and haven't had any issues yet. I used Recovery for previous ROM updates also with no problems. I have not tried to flash through ROM Manager, since Recovery has worked well.
I had earlier flashed the radio, so I'm not running the stock radio. I'm running the first radio in the thread (I had 3G/4G handoff issues with the old version of the LTE radio).
Just do a nandroid backup first to be on the safe side.
Here's the stock kernel from software ver 1.13.651.7, flashable through recovery, of course.
Thank you.
Sent from my PG86100 using XDA Premium App
Thanx for this.
Sent from my PG86100 using XDA Premium App
Finally! Thanks man!
Wow thanks.
thanks.........
Thanks dude. Not sure what I did but my battery started discharging crazy fast this morning, I had to switch back to stock.
[Kernel] Modified Stock 2.08.651.2 (2.6.35.13-g84f8edd)
Adding new kernel to new post.
Good looking man. Thanks.
Locked & Loaded
" Shooter on Deck"
Has anyone flashed this kernel?
I downloaded this from the link at the top, and flashed via TWRP recovery (yes I did wipe the caches).
After I rebooted, I checked the Kernel version, and either it didn't work, or the version of this kernel is the same as the original one I had, 1.11.651.3. In fact, I tried this twice, but the results are still the same.
Am I missing something?
Dudemeister said:
Has anyone flashed this kernel?
I downloaded this from the link at the top, and flashed via TWRP recovery (yes I did wipe the caches).
After I rebooted, I checked the Kernel version, and either it didn't work, or the version of this kernel is the same as the original one I had, 1.11.651.3. In fact, I tried this twice, but the results are still the same.
Am I missing something?
Click to expand...
Click to collapse
Do you have hboot 1.5? Just asking because there are ~2 more steps to take before flashing a kernel... Or I heard you can use Flash Image GUI.
Sent from my Infected EVO3D! Virus, you rock!
I flashed a AOSP kernel, and my rom didn't load. so I restored a backup and my wifi didn't work and also. So i flashed this kernel and now my backup doesn't work or even any rom that I have downloaded.
using viperrom before.
now nothing is working
questions is:
1. is there a way to flash a kernel, using recovery?
2. what roms work with this kernal?
im getting really sick of this evo3d.
TheFlatulentFox said:
questions is:
1. is there a way to flash a kernel, using recovery?
2. what roms work with this kernal?
Click to expand...
Click to collapse
1. Yes, so long as you are NOT HBOOT 1.5
2. This is a stock HTC Sense kernel as clearly outlined in the OP. It is not AOSP.
SteelH said:
1. Yes, so long as you are NOT HBOOT 1.5
2. This is a stock HTC Sense kernel as clearly outlined in the OP. It is not AOSP.
Click to expand...
Click to collapse
yeah I have Hboot 1.5
and I know I installed a kernel for AOSP and downloaded an AOSP rom. I should have said that before. but The AOSP rom didnt load, it just hanged on the HTC screen. So i recovered my backup using still on the AOSP kernel, it worked excluding WIFI and some other stuff. so I installed this kernel using GUI app, and restored my back up again. and now it just hangs.
now I can't find a rom for this kernel I downloaded three different roms, all sense. none of them are working.
TheFlatulentFox said:
yeah I have Hboot 1.5
and I know I installed a kernel for AOSP and downloaded an AOSP rom. I should have said that before. but The AOSP rom didnt load, it just hanged on the HTC screen. So i recovered my backup using still on the AOSP kernel, it worked excluding WIFI and some other stuff. so I installed this kernel using GUI app, and restored my back up again. and now it just hangs.
now I can't find a rom for this kernel I downloaded three different roms, all sense. none of them are working.
Click to expand...
Click to collapse
Someone correct me if I'm wrong, but I'm almost positive this kernel is WAY outdated (note the date of the OP)
I wanted to root for a while, just looking for a rom that looks and feels stock, but has better battery and all..
well I followed
watch?v=-hPSrzRqtX4&feature=player_detailpage (cannot post link as I'm new)
and successfully got to supra rom.. well I don't like the vanilla 5 screen non sense homescreen, though I do like the crt visuals lol...
Anyways, I can't even use my wifi, it just says error, and I NEED wifi, I use it at home non-stop as I have horrible service.
Well I tried to switch to viperRom - I did the reset in bootloader, then full wipe, then cache and all that..
well, once I installed the viperRom .zip, I started my phone and its just the same as before... I can't switch roms! I know this is prolly some nooby thing I don't understand but I've been searching all night and just want to get everything working and need to sleep haha
any help GREATLY APPRECIATED
What do you mean about not being able to switch roms?
Sent from my PG86100 using Tapatalk
I figured out that I was trying to flash to viperRom using only the update
I'm now on viper, with stock kernel and still cannot get wifi to work, any ideas? Any searching turns up kernel issues, and to revert to stock.. well I'm on stock kernel
jlear3 said:
I figured out that I was trying to flash to viperRom using only the update
I'm now on viper, with stock kernel and still cannot get wifi to work, any ideas? Any searching turns up kernel issues, and to revert to stock.. well I'm on stock kernel
Click to expand...
Click to collapse
unless you're having hardware wifi issues, which the best way to determine would be through running a stock rom and stock kernel, my guess is you have a kernel and rom mismatch issue.
the way htc has their kernels compiled includes two things: kernel and modules.
the modules include a wifi module.
if you flash a kernel and then load a rom, chances are the rom might overwrite either the kernel, the kernel modules, or both.
the best way to avoid this scenario is to flash the rom first and then flash the kernel. the kernel flash will load the kernel itself and its modules. i.e. if you're on a rom you want to stay with now, flash the kernel again and then wifi should work.
hope that helps!
Thank you, o figured this out myself, but you were right lol I was using 2.3.3 roms on 2.3.4
Sent from my PG86100 using XDA App
Hello,
I am trying to get viperROM to work correctly on my Evo 3D. I would have posted in that thread but I don't have 10 posts yet so I'm not allowed...
I wasn't thinking and I accepted the OTA update when it came out.
So I used this tutorial and did the HTC unlock and then flashed CWM 4.0.1.4 to my phone.
I used CWM to back up my stock ROM, then I used it to install viperROM.
Well, it worked except for the fact that the WiFi wouldn't turn on. It just said "Error".
I have been reading these forums for hours now and my eyes are glazing over but I figure it's something to do with the radio I guess?
I tried to do some forum searches but the search function is apparently down for nightly maintenance.
Anyways, I restored my backup and thank God WiFi is working again.
Can someone please point me in the right direction to fixing this?
Thanks.
Did you do a full wipe before you installed viperRom?
I don't believe you can use Viperrom on your phone because it is a 2.3.3 rom and your kernel is only for 2.3.4 roms. When you took the OTA and your phone upgraded to the 1.50 bootloader you lost the ability to install kernels and write to the boot partition. With out the proper kernel you will have problems running any 2.3.3 roms properly. Look for a rom that is already upgraded to 2.3.4 and give that a try. For now I would flash back to stock and wait for Viperboy to update his rom.
help please?
I try RCMIX 2.2.3 and recover HTC Rom but stcuk boot HTC logo.
Can i replaces viperROM ? how i can?
I'm Newbie.
Thanks
Konfuzion said:
Did you do a full wipe before you installed viperRom?
Click to expand...
Click to collapse
Yes, I did both of the wipes that it prompted before installing it.
cruise350 said:
I don't believe you can use Viperrom on your phone because it is a 2.3.3 rom and your kernel is only for 2.3.4 roms. When you took the OTA and your phone upgraded to the 1.50 bootloader you lost the ability to install kernels and write to the boot partition. With out the proper kernel you will have problems running any 2.3.3 roms properly. Look for a rom that is already upgraded to 2.3.4 and give that a try. For now I would flash back to stock and wait for Viperboy to update his rom.
Click to expand...
Click to collapse
I never would have thought of that!
Thanks both of you for your help