hi everyone, i got myself into a hot mess here after trying to flash pershoots kernel
10.1-Wifi (GT-P7510):
boot-cm_2636.4-oc-xtra-vfpv3-d16_fp-081911.zip
after rebooting from CWR i get a scrambled rainbow screen.... Ive tried rebooting twice.
If I go back into CWR, I cant do any restores, its as if it doesnt see the sdcard or anything.
I couldnt post this in the dev section as I dont have enough posts. Any advice is greatly appreciated!
Check the dev section and flash via odin.
Sent from my GT-P7510 using Tapatalk
I think thats overclocking, right? Anyways, it happened once with my tab and I couldn't get it back to normal except by booting a new ROM (Starburst). Try this method, but I can't be 100% sure it will work with all people
I had this happen to me
just flash the starburst rom, it installs a new kernel
saved my tab
= )
Related
So j was trying to get it to where it had gingerbread and lockscreen mods on it now its on eclair and has 2 bootloaders on it , its on 2.1 update 1 baseband t959uvjfd and kernal 2.6.29 this was awhile ago now and I remember I was trying to install gingerbread and I got an error on startup that said something like creating system partition , not enough space for partition , and the background was bullets or something ... I REALLY NEED SOMEONE WHOSE HAD THIS PHONE FOR AWHILD TO HELP WITH DIRECTIONS TO FIX MY GIRLS PHONE its on eclair now anc runs like **** , it freezes and just runs bad , I think im experienced with odin and flashing , ive made themes for my old epic 4g and my new galaxy 2 but when I picked up her phone and looked around I was lost ... I hope someone can help me
Sent from my SPH-D710 using xda premium
Digglez said:
So j was trying to get it to where it had gingerbread and lockscreen mods on it now its on eclair and has 2 bootloaders on it , its on 2.1 update 1 baseband t959uvjfd and kernal 2.6.29 this was awhile ago now and I remember I was trying to install gingerbread and I got an error on startup that said something like creating system partition , not enough space for partition , and the background was bullets or something ... I REALLY NEED SOMEONE WHOSE HAD THIS PHONE FOR AWHILD TO HELP WITH DIRECTIONS TO FIX MY GIRLS PHONE its on eclair now anc runs like **** , it freezes and just runs bad , I think im experienced with odin and flashing , ive made themes for my old epic 4g and my new galaxy 2 but when I picked up her phone and looked around I was lost ... I hope someone can help me
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I assume thet the phone is rooted. You should flash a 2.2 Rom from the vibrant forum first. Bionix, Trigger etc. Once you flash a 2.2 froyo rom, it should be smooth. I like Zendroid located here
http://forum.xda-developers.com/showthread.php?t=1079517
If you can get into CWM you should be golden ..good luck
Haha Lapdog hit the Thanks instead of the Quote.
Ok then. Here us what you can do. Hit my signature and download CWR. Open the folder and put the Update.zip on her internal SD. Go here and download this ROM (Derange9). Put it on her internal SDcard.
Boot into recovery (either volume up AND down and power OR volume up + power [depending on whatever bootloader you have]). It will show up Blue.
Tab down to Reinstall Packages and hit it. It will cycle through and come back to the blue screen. Hit Reinstall Packages again and the recovery will go from blue (stock) to green (CWR).
Scroll down to Wipe cache, factory reset/data and advanced->wipe Dalvik. Then scroll to Install from SD and find the above ROM and flash it.
Once done Reboot and profit, you are on Deranged9. If you want to flash a different ROM, just replace D9 with whatever one you want. After it boots up and she is no longer pissed at you, you should get some kisses. Tell er' Wood sent you.
really she wants it to just be stock , it was ten times smoother when i got it then after i tried to put the lockscreens on it , is there any way i can get rid of the 2 bootloaders and just have one and have it be all stock
Try Odin if u want it back dtock
Sent from my SGH-T959 using XDA App
If you just want to Odin to the latest stock, it appears to be KB5:
http://www.google.com/search?hl=en&sky=mrdr&q=t959uvkb5&oq=t959uvk&aq=1&aqi=s1g4&aql=&gs_sm=c&gs_upl=2935l15089l0l18525l11l10l0l1l1l0l531l1319l0.6.5-1l9l0&mvs=0
That doesnt solve my dual bootloader problem though
Sent from my SPH-D710 using xda premium
I don't know what you mean by dual bootloader. You might want to Odin back to the froyo bootloader before installing a stock rom.
i mean when it first turns on you see it go through 2 bootloaders the froyo one and the gingerbread one First is Galaxy S i9000 logo , then Vibrant logo, finally is T-mobile bootscreen.
i would like to get it back to how it was where it only says the vibrant logo when loading then i would like to odin it to the most rexent stock version
like if i hook it up to samsung kies for vibrant that will fix it right ?
At least two of the recent hard-brickings I've read about recently have involved Kies. I wouldn't touch it. Odin or Heimdall for me.
Info about kb5:
http://duckduckgo.com/?q=t959uvkb5
I'm a little concerned about your initial "i9000". If there is any possibility you changed the SBL, you might want to Odin back to a stock Froyo SBL before loading kb5. Do it in the same session: uncheck "reboot" in Odin before loading the SBL, then after it loads, load kb5. Probably the initial "i9000" just means you somehow got an i9000 kernel.
I think you need to go back to odin3 flash the stock jfd to stock then go in phone dailer press *2767*3855# to format the system to wipe out the old folder then go back to odin3 again and flash the VIBRANT STOCK (FROYO) BOOTLOADER. I hope that help. I did have 2 bootloader like seeing i9000 and the Vibrant logo before
bootloader
http://forum.xda-developers.com/showthread.php?t=1117990
Sbl and jdf , no comprendas , I get most of what your saying just not those terms , and whats odin3 I know what odin is just never heard of odin3 unless thats the version
Sent from my SPH-D710 using xda premium
Dude quit asking redundant questions about the help and just read a guide on Odin, know How to use it and fix the phone.
You shouldnt be flashing if you can't get back to stock.
Sent from my SGH-T959 using XDA App
ok im assuming sbl is samsung boot loader but like i said in the beginning i dont have a vibrant , i was just trying to help my girl deck out her phone , you can catch me in the og epic or the epic touch threads and im pretty much on the ball there and im pretty well versed in using odin to get MY phone back to stock . as for redundant questions ... i dont really see where i asked any ? i just know last time i started messing with my girls phone it went all bad so i guess i was just trying to make sure i understood what people were talking about ... also i guess i could have just googled odin3 (which i just did and im pretty sure i got the idea of it) but i was on the go and had really horrible service , its the Q&A section so i guess dont read it if you dont wanna hear people asking question
Use the AIO Vibrant toolbox 2.5
http://forum.xda-developers.com/showthread.php?t=954509
Kies won't fix anything. If you don't have much experience, use Heimdall One-Click. http://forum.xda-developers.com/showthread.php?t=1278683
It will flash the stock bootloaders and the stock Vibrant ROM. It will be back to the way it was when you (or she) first got it.
Note: It won't let you flash bootloaders until you've flashed it once, so just reflash it with bootloaders checked. If it fails, just keep doing it. It will flash it eventually. I used this when I bricked my Vibrant.
Flashed CM9 to experiment with it and see how it ran, prior to doing so made a backup of current setup (unnamed 2.2.1 w/ siyah kernel). After flashing to CM9 and playing around a bit i was going to revert back to my original setup. Tried flashing back and now I am unable to even get to CWM Recovery, or Download Mode. It will boot to the SGS2 screen and then just go black no matter what I do. It is still recognized in Odin so I was thinking I'm going to have to revert back to stock and just flash it back afterwards. Any ideas before I proceed?
AK40Nine said:
Flashed CM9 to experiment with it and see how it ran, prior to doing so made a backup of current setup (unnamed 2.2.1 w/ siyah kernel). After flashing to CM9 and playing around a bit i was going to revert back to my original setup. Tried flashing back and now I am unable to even get to CWM Recovery, or Download Mode. It will boot to the SGS2 screen and then just go black no matter what I do. It is still recognized in Odin so I was thinking I'm going to have to revert back to stock and just flash it back afterwards. Any ideas before I proceed?
Click to expand...
Click to collapse
Flash back to stock. Strange - you say you can't get into download mode, but Odin recognizes it?
Ok, finally got into DL mode and flashed a stock kernel from Entropy's post. Now i'm faced with it booting to the ATT splash screen and it just loops that screen infinitely. I'm still unable to access recovery mode to wipe data/cache or anything like that. This is becoming frustrating and I'm not quite able to wrap my head around why after flashing stock that I'm unable to boot into the phone beyond the splash screen. Am I using the wrong stock fw or something? Here's the link to the one i used.
http://forum.xda-developers.com/showthread.php?t=1286432
From my experience it's the wrong SPL/radio combo.
No matter what I do, I'm stuck up to that point.....I've tried a few different stock flash packages through Odin to no avail, same result every time. I know i'm probably doing something wrong or I'm missing something here, its not bricked I do know that so its not like i'm dead in the water here. Any ideas would be better than where I'm at currently.
BeenAndroidized said:
From my experience it's the wrong SPL/radio combo.
Click to expand...
Click to collapse
There is no SPL on the GSII, and a bad radio will only screw up calls/cell data.
To the OP - exactly how did you flash CM9? CWM or some kanged-up Odin build?
Through CWM, everything worked fine but when I was using CM9 my back button and serach button weren't working, probably erroneous to this situation. this is just messing me all up that I'm able to boot up til the splash and then it just loops it over and over, its making me think that the FW is having issues loading or something.
Problem solved finally. Something must have changed after this last flash attempt because now I was able to get into CWM of all things and recover my old backups. Nice little adventure that was. Thanks guys for the help!
Entropy512 said:
There is no SPL on the GSII, and a bad radio will only screw up calls/cell data.
To the OP - exactly how did you flash CM9? CWM or some kanged-up Odin build?
Click to expand...
Click to collapse
Understood. Coming from G1 I know it's different.
Sent from my SAMSUNG-SGH-I777 using XDA App
major problem.
i flashed team perfection objection ics rom. felt that i wanted to go back to stock and thats when the problem showed up.
i havent flashed any other custom rom before the objection ics. i came from stock rooted telus.
tried flashing the tar file from this thread
[STOCK][ODIN][GB][Telus] For those who wish to revert to stock Telus
http://forum.xda-developers.com/showthread.php?p=27508953#post27508953
- sometimes odin freezes but when it doesnt and actually finishes flashing, phone wouldnt start up after the automatic reboot. (how long should i wait for the initial boot to start? i wait for about 2-3 minutes of nothing but black screen before resetting)
i tried flashing the backup files from this thread
[ROOT]For TELUS Note (i717D) - No Flash Counter
http://forum.xda-developers.com/showthread.php?t=1585440&highlight=telus+rooted+system
- after flashing, boots but gets stuck at the "touch the android screen to begin"
anybody have an idea whats going on?
tried 2 different stock tar files through odin and i cant get any of them to work.
i flashed back to the objection rom through cwm to make sure that my phone isnt bricked or anything. seems to be working fine. havent tried any other custom roms though.
any help would be appreciated.
thanks
Hi you may have a partition that is corrapted or there may be something wrong with that telus Odin flash. Go to dev section. There is another Odin flash for telus. It is a stock telus rom rooted that is flashed through Odin. It does work, I hav e used: t before. I will send you a link when I get home from work.
Sent from my SAMSUNG-SGH-I717 using xda premium
I use to have a telus note now I have a rogers note. I may still have a back up of a telus rom. Will check my computure when I get home
Sent from my SAMSUNG-SGH-I717 using xda premium
I may have found your problem. When using Odin, and flashing a backup file, it does not format your phone partitions. So you first have to go into cwm and do a factory wipe, wipe dalvik and go into advance and wipe the other dalvik . Do a battery pull, and now put your phone into download for Odin. I have telus kernel, telus modem and telus stock recovery that can be flashed in cwm. Just not sure if I have the stock from still. Pm me if you have any questions
Sent from my SAMSUNG-SGH-I717 using xda premium
Just a update wipe data, wipe cache and wipe dalvik cache before you use Odin to flash a rom. I told you partly wrong in precise post
Sent from my SAMSUNG-SGH-I717 using xda premium
thanks for the help guys
thanks for the help guys.
i dont know if its a partition problem though but it really got me worried.
for some reason i got it to flash properly and it booted up with no problems.
now im thinking thats its the odin software that was causing the problems. the first one that i used to root my phone a couple of weeks back had an "evo 4g" title at the top. it didnt gave me any problems back then so i ignored it. and thats the same one ive been busting to use last night to flash back to stock. anyhow, i tried using a different odin3 that has "android+slp" label on it and i noticed that it was freezing less and actually finishes the flashing but the bootup still has some problems. i get stuck at the bootup logo for a couple of tries. after sometime i just flashed it over and over again until i hit the jackpot.
is there anyway that i can check if my partitions are still broken? im thinking that i wont be doing any flashing until the update comes in july. the ics roms arent stable enough for me anyway.
oh what do i do if wanna get the official ics update? i have stock system, i think, but its rooted. do i just flash stock kernel and unroot it?
i found an article in lockermikedotcom that allows you to unroot using a batchfile. i was wondering if you guys can point me in the right direction. thanks
If you have a stock rom but it is rooted, flashing a stock kernel usually does not remove root. You would have to install stock recovery first and then you adb to remove the superuser and busbox files from your phone to get it totally stock like it was before you rooted it. This batch file DooMLord_v1_unrooting_zip will unroot your phone .It work on the Rogers Note anyways. http://www.mediafire.com/download.php?7ysrb3v7tfu9t1a
So I was pretty determined to get Cm 10.1 running on my Galaxy Note 2 for Verizon. Before hand, I was using TWRP to do all my ROM flashings but when I tried to use CM 10.1, I was told I must use CWM for it to work properly.
Here's my issue, I tried using CWM but it kept on giving me an error and after searching for awhile, it said its because I'm trying to use TWRP instead of CWM. So I flashed CWM and it gave me the same error. Tried both Touch and regular, downgraded and upgraded to the latest CWM but still same error. So I said **** it and installed the lastest TWRP. Then all the ROMs that were giving me issues started to install flawlessly. Then I went to CWM and it gave me the same error.
Am I doing something wrong when I flash CWM? I tried both Odin and APP Update way and both with same results. After using TWRP for awhile, I actually am starting to like the CWM Touch a lot better and I want to switch but not if its going to be giving me problems every flash.
Any insight would be helpful,
and as always to everyone on this forum, thanks
Just make sure you are using the latest version of TWRP 2.5 and you will be fine. You also may need to re-download your ROM file.
Well I am, in a way, stuck using the TWRP right now but I would like to know if I can actually change it to CWM. And if so, how would I go about doing that? because flashing the CWM alone isn't doing anything for me.
wythyntime said:
Well I am, in a way, stuck using the TWRP right now but I would like to know if I can actually change it to CWM. And if so, how would I go about doing that? because flashing the CWM alone isn't doing anything for me.
Click to expand...
Click to collapse
That is the way I have always gone about getting CWM on my phone back when I wanted it. I would just flash over TWRP in TWRP and then reboot system and then reboot back into recovery and it would always be CWM. If it doesnt work for you that way then see if they have a Odin tar and if so follow the instructions to flash it in Odin. They may not have an Odin flashable though, its been a long time since I have used it and on a different phone so....
Sent from my SCH-I605 using XDA Premium HD app
Let me actually rephrase this. (My bad for any confusion)
So if I try to flash a rom using TWRP, it goes through without any issues, even the CM rom. But when I flash CWM and try flashing, it gives me the getdevice-"(t0vzwte)"-not exact".. When researching, I was kept on told its because it is running TWRP. I tell them its CWM and they told me to update my CWM. I actually like CWM a bit better, idk why. but I was just trying to get my phone 100% the way I want it.
Here goes, hopefully someone can help!
Ive installed a fair few roms on my phone and never had any issue, maybe this explains the complacency.
After updating to CWM recovery -6.0.4.7 I get stuck on my bootscreen, only seeing "Samsung galaxy I9100P" , ive been putting I9100 roms on it and losing NFC functionality for a while.
I went to update to the newest CM-11 nightly and read I needed to update CWM-recovery first. So did that, rebooted phone as instructed after installing new CWMr and nothing. Just stuck on I9100 screen.
No way to get into recovery mode, the only bright side I have found is I can boot into ODIN download mode. So what would be my next steps anyone?
Flash stock rom. or flash a kernel to get a working recovery bk with odin.
Sent from my GT-I9300 using xda premium
andrewwright said:
Flash stock rom. or flash a kernel to get a working recovery bk with odin.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
From a dig through the forums it sounds like NAND rw corruption?
I wouldn't be calling it that just yet. Unless you'd like to pay for a motherboard replacement ? Most of these are recoverable.
Used ODIN and flashed a new kernel, still on the boot screen, except now I have the yellow exclamation mark. Now to, Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.. this day is not going well..
Fingers crossed, flashed 3 or 4 kernels before one worked and allowed me into recovery mode. Trying to restore back to my backup from this morning. Heres hoping! :good:
Worked perfectly, the first thing I did was retry the initial task which was what got me stuck, currently waiting on CM-11's initial boot up after a successful install Thanks for the calming responses!