I had Streakdroid 1.9.1 installed on my Dell Streak, I was trying to update my Streak to 2.0.0. Downloaded amss.mbn from DJ.steve's thread by using right click... I was not aware that file was incorrect (mirror2.streakdroid.com/amss.mbn is broken, basically, amss.mbn I had was a webpage)... So I pretty much fast booted that webpage into my streak... After rebooted the streak, I can no longer power it back on nor fast boot or anything...
I tried QDLTool following the QDLTool tutorial to every word, this is what I get
Code:
###QDLTool: M 2.7.4.8, build ID: 1.301.20101022, time stamp: Sun Aug 21 23:48:27 2011
Check image DBL: C:\Users\liang\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\dbl.mbn ...
Check image FSBL: C:\Users\liang\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\fsbl.mbn ...
Check image OSBL: C:\Users\liang\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\osbl.mbn ...
Check image AMSS: C:\Users\liang\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\amss.mbn ...
Check image DSP1: C:\Users\liang\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\dsp1.mbn ...
Check image APPSBL: C:\Users\liang\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\appsboot.mbn ...
Check image DT: C:\Users\liang\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\DT.img ...
Check image boot.img: C:\Users\liang\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\boot.img ...
Check image system.img: C:\Users\liang\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\system.img ...
Check image userdata.img: C:\Users\liang\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\userdata.img ...
Check image recovery.img: C:\Users\liang\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\recovery.img ...
Check image logfilter.img: C:\Users\liang\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\logfilter.img ...
Check image Region: C:\Users\liang\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\RC_us.img ...
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl Boot System Userdata Recovery LogFilter RCFile
Check images ok
Download in speedup way
Open COM port success
OSBL version: 12-5035-AUSB1AM-09
osbl.mbn version:
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Open COM port success
Check Secure Boot is enabled
#Set Fast Boot Flag success
Open COM port success
Test communication success
Check Secure Boot is enabled
#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#DT to DDR success
#backup FSBL to DDR success
Run HEX success
Check Secure Boot is enabled
Streaming hello success
Send Security mode success
Download partition table success
#Download DBL success
#Download FSBL success
#Download OSBL success
#Download DT success
#Download backup FSBL success
Erase EFS2 success
Wait for rebooting ....... ok
Wait for modem set up ......
Wait for ADB device .........
ERROR[D2]: wait ADB fastboot mode timeout!
Please check that device is exist and driver is properly installed.
Download Fail! - 2011/08/21 23:48:56
Elapsed Time: 29.31 sec
I tried reinstalling the driver for the bricked phone(R288920) - Qualcomm HS-USB Diagnostics 9002 and tried different USB ports, but I still get the above error... I think it probably ADB device driver, but have no idea what to do. Can someone please help?
I was in the same situation as you 2 days ago. Managed to get it up again using streakflash.zip version of the QDL tool: http://www.rdtk.net/2011/07/16/modding-your-streak-where-to-start/
kiwi45 said:
I was in the same situation as you 2 days ago. Managed to get it up again using streakflash.zip version of the QDL tool: rdtk.net/2011/07/16/modding-your-streak-where-to-start
Click to expand...
Click to collapse
Thanks!
I tried Streakflash, and it appeared to be successful.
Code:
--
LOG
--
###QDLTool: M 2.7.4.5, build ID: 1.302.20100910, time stamp: Mon Aug 22 13:09:16 2011
Check image DBL: C:\Users\leonchen\Desktop\streakflash\images\dbl.mbn ...
Check image FSBL: C:\Users\leonchen\Desktop\streakflash\images\fsbl.mbn ...
Check image OSBL: C:\Users\leonchen\Desktop\streakflash\images\osbl.mbn ...
Check image AMSS: C:\Users\leonchen\Desktop\streakflash\images\amss.mbn ...
Check image DSP1: C:\Users\leonchen\Desktop\streakflash\images\dsp1.mbn ...
Check image APPSBL: C:\Users\leonchen\Desktop\streakflash\images\appsboot.mbn ...
Check image DT: C:\Users\leonchen\Desktop\streakflash\images\DT.img ...
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl
Check images ok
Download in speedup way
Open COM port success
OSBL version: 12-5035-AUSB1AM-09
osbl.mbn version:
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Open COM port success
Test communication success
Check Secure Boot is enabled
#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#AMSS to DDR success
#DSP1 to DDR success
#DT to DDR success
#APPSBL to DDR success
#backup FSBL to DDR success
#backup OSBL to DDR success
#backup DT to DDR success
#backup APPSBL to DDR success
Run HEX success
Check Secure Boot is enabled
Streaming hello success
Send Security mode success
Download partition table success
#Download DBL success
#Download FSBL success
#Download OSBL success
#Download AMSS success
#Download DSP1 success
#Download DT success
#Download APPSBL success
#Download backup FSBL success
#Download backup OSBL success
#Download backup DT success
#Download backup APPSBL success
Erase EFS2 success
Wait for rebooting ....... ok
Wait for modem set up ......
Download success - 2011/08/22 13:10:41
Elapsed Time: 85.04 sec
However, I didn't get much luck with QDLTool(repair tool) after multiple attempts. I tried different USB ports, all I get is "Error [D2]: wait ADB fastboot mode timeout!"
Code:
--
LOG
--
###QDLTool: M 2.7.4.8, build ID: 1.301.20101022, time stamp: Mon Aug 22 13:16:19 2011
Check image DBL: C:\Users\leonchen\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\dbl.mbn ...
Check image FSBL: C:\Users\leonchen\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\fsbl.mbn ...
Check image OSBL: C:\Users\leonchen\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\osbl.mbn ...
Check image AMSS: C:\Users\leonchen\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\amss.mbn ...
Check image DSP1: C:\Users\leonchen\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\dsp1.mbn ...
Check image APPSBL: C:\Users\leonchen\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\appsboot.mbn ...
Check image DT: C:\Users\leonchen\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\DT.img ...
Check image boot.img: C:\Users\leonchen\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\boot.img ...
Check image system.img: C:\Users\leonchen\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\system.img ...
Check image userdata.img: C:\Users\leonchen\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\userdata.img ...
Check image recovery.img: C:\Users\leonchen\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\recovery.img ...
Check image logfilter.img: C:\Users\leonchen\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\logfilter.img ...
Check image Region: C:\Users\leonchen\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\RC_us.img ...
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl Boot System Userdata Recovery LogFilter RCFile
Check images ok
Download in speedup way
Open COM port success
OSBL version: 12-5035-AUSB1AM-09
osbl.mbn version:
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Open COM port success
Check Secure Boot is enabled
#Set Fast Boot Flag success
Open COM port success
Test communication success
Check Secure Boot is enabled
#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#DT to DDR success
#backup FSBL to DDR success
Run HEX success
Check Secure Boot is enabled
Streaming hello success
Send Security mode success
Download partition table success
#Download DBL success
#Download FSBL success
#Download OSBL success
#Download DT success
#Download backup FSBL success
Erase EFS2 success
Wait for rebooting ....... ok
Wait for modem set up ......
Wait for ADB device .........
ERROR[D2]: wait ADB fastboot mode timeout!
Please check that device is exist and driver is properly installed.
Download Fail! - 2011/08/22 13:16:55
Elapsed Time: 36.11 sec
I am lost...no idea what to do now...
iLluFe... Never be bored to repeat again.. I never was so, because flashing amss.mbm.. and now..my baseband turned into AUS_100908_01_BOSS_EVT3_F-EU
I'm using streakflash.. downloaded from streakdroid.com
Okay... good luck...
Sent from my Dell Streak using Tapatalk
So did StreakFlash finally work?
I too am stuck at the same problem.
Did the same mistake.
I am currently downloading StreakFlash and QDL Tool. Hoping for good. Will post back if it works for me.
Worked like a magic
Guys,
I tried it, worked good and unbricked my phone.
Make sure u use streakflash first and then repairtool.
I did it and now I am happily on GingerStreak 2.4.4
Related
###QDLTool: M 2.7.4.8, build ID: 1.301.20101022, time stamp: Mon Feb 21 10:21:48 2011
Check image DBL: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\dbl.mbn ...
Check image FSBL: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\fsbl.mbn ...
Check image OSBL: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\osbl.mbn ...
Check image AMSS: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\amss.mbn ...
Check image DSP1: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\dsp1.mbn ...
Check image APPSBL: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\appsboot.mbn ...
Check image DT: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\DT.img ...
Check image boot.img: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\boot.img ...
Check image system.img: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\system.img ...
Check image userdata.img: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\userdata.img ...
Check image recovery.img: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\recovery.img ...
Check image logfilter.img: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\logfilter.img ...
Check image Region: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\RC_us.img ...
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl Boot System Userdata Recovery LogFilter RCFile
Check images ok
Download in speedup way
Open COM port success
OSBL version: 12-5035-AUSB1AM-09
osbl.mbn version:
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Open COM port success
Check Secure Boot is enabled
#Set Fast Boot Flag success
Open COM port success
Test communication success
Check Secure Boot is enabled
#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#DT to DDR success
#backup FSBL to DDR success
Run HEX success
Check Secure Boot is enabled
Streaming hello success
Send Security mode success
Download partition table success
#Download DBL success
#Download FSBL success
#Download OSBL success
#Download DT success
#Download backup FSBL success
Erase EFS2 success
Wait for rebooting ....... ok
Wait for modem set up ......
Wait for ADB device .........
ERROR[D2]: wait ADB fastboot mode timeout!
Please check that device is exist and driver is properly installed.
Download Fail! - 2011/02/21 10:22:35
Elapsed Time: 47.11 sec
My dell streak doesn't go past dell logo
"Recovery mode", by holding "Vol up, down and power" at the same time not working.
Fastboot not working as well. just power boton and dell logo stays on.
help me please!!!
QDLTool
Check image DBL: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\dbl.mbn ...
Check image FSBL: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\fsbl.mbn ...
Check image OSBL: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\osbl.mbn ...
Check image AMSS: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\amss.mbn ...
Check image DSP1: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\dsp1.mbn ...
Check image APPSBL: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\appsboot.mbn ...
Check image DT: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\DT.img ...
Check image boot.img: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\boot.img ...
Check image system.img: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\system.img ...
Check image userdata.img: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\userdata.img ...
Check image recovery.img: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\recovery.img ...
Check image logfilter.img: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\logfilter.img ...
Check image Region: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\RC_us.img ...
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl Boot System Userdata Recovery LogFilter RCFile
Check images ok
Download in speedup way
Open COM port success
OSBL version: 12-5035-AUSB1AM-09
osbl.mbn version:
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Open COM port success
Check Secure Boot is enabled
#Set Fast Boot Flag success
Open COM port success
Test communication success
Check Secure Boot is enabled
#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#DT to DDR success
#backup FSBL to DDR success
Run HEX success
Check Secure Boot is enabled
Streaming hello success
Send Security mode success
Download partition table success
#Download DBL success
#Download FSBL success
#Download OSBL success
#Download DT success
#Download backup FSBL success
Erase EFS2 success
Wait for rebooting ....... ok
Wait for modem set up ......
Wait for ADB device .........
ERROR[D2]: wait ADB fastboot mode timeout!
Please check that device is exist and driver is properly installed.
Download Fail! - 2011/05/07 18:43:45
Elapsed Time: 30.39 secgo stays on.
Look at my post on this thread, i had the exact problem and i solved it.
http://forum.xda-developers.com/showpost.php?p=13446944&postcount=10
read the entire thread including my post, if you still have problems let me know.
link to entire thread.
http://forum.xda-developers.com/showthread.php?p=13446944#post13446944
Or follow this thread
http://forum.xda-developers.com/showthread.php?t=982906
Hi....
I have big problemm with my Dell Streak!!!
Few days ago after reboot I receive NO SIM CARD error and the softkey didn't work. I send it to warranty repair and 3 day later I receive it back working. The same day it crash with the same errors again. Then I did factory reset, but it didn't help. Then - fastboot/update.pkg (15309 stock rom) and everything was fine 'till the next reboot. Then - fastboot/StreakDroid5-2.0.zip and it hangs on Dell logo forever!!! Now I did QDL Tool. I did everything as describe except for the ADB driver – I receive code 10 error when I try to update the driver. Then I run QDL Tool but nothing happen. I receive this report from QDL Tool:
###QDLTool: M 2.7.4.5, build ID: 1.302.20100910, time stamp: Mon Jul 25 11:34:14 2011
Check image DBL: D:\Android Software\SYSTEM\zzzNew\streakflash\images\dbl.mbn ...
Check image FSBL: D:\Android Software\SYSTEM\zzzNew\streakflash\images\fsbl.mbn ...
Check image OSBL: D:\Android Software\SYSTEM\zzzNew\streakflash\images\osbl.mbn ...
Check image AMSS: D:\Android Software\SYSTEM\zzzNew\streakflash\images\amss.mbn ...
Check image DSP1: D:\Android Software\SYSTEM\zzzNew\streakflash\images\dsp1.mbn ...
Check image APPSBL: D:\Android Software\SYSTEM\zzzNew\streakflash\images\appsboot.mbn ...
Check image DT: D:\Android Software\SYSTEM\zzzNew\streakflash\images\DT.img ...
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl
Check images ok
Download in speedup way
Open COM port success
OSBL version: 00-5035-AUSB1AM-09
osbl.mbn version:
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Open COM port success
Test communication success
Check Secure Boot is enabled
#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#AMSS to DDR success
#DSP1 to DDR success
#DT to DDR success
#APPSBL to DDR success
#backup FSBL to DDR success
#backup OSBL to DDR success
#backup DT to DDR success
#backup APPSBL to DDR success
Run HEX success
Check Secure Boot is enabled
Streaming hello success
Send Security mode success
Download partition table success
#Download DBL success
#Download FSBL success
#Download OSBL success
#Download AMSS success
#Download DSP1 success
#Download DT success
#Download APPSBL success
#Download backup FSBL success
#Download backup OSBL success
#Download backup DT success
#Download backup APPSBL success
Erase EFS2 success
Wait for rebooting ....... ok
Wait for modem set up ......
Download success - 2011/07/25 11:35:40
Elapsed Time: 85.48 sec
But the phone remain DEAD!!! Any ideas how to proceed or how to install ADB driver when my PC recognize the Dell as "Qualcomm HS-USB Diagnostics 9002"?
Hey there! I own a streak since august 2010 and I know quite well the whole thing (fastboot, recovery, clockwork recovery, etc.).
recently Ia colleague gave me a streak and I noticed that even if sometimes it was correctly booting, most of the time it went into a booting loop.
context: my adb driver is correctly working (tested same config in a few minutes on another streak) so I exclude any adb driver problem.
I tried to refresh it and now I'm in the following situation: stuck at dell logo during boot, no way of going into recovery mode, no way of going in fastboot mode (which means that if I push the came button while powering on, the white screen doesn't show and instead the streak keeps rebooitng).
I'm able to flash with streakflash but not to reflash the whole system with QDL; here are the logs of QDL;
streakflash (QDL Upgrade build M 2.7.4.5):
Check image OSBL: C:\Users\aletib\Desktop\streakflash\images\osbl.mbn ...
Check image AMSS: C:\Users\aletib\Desktop\streakflash\images\amss.mbn ...
Check image DSP1: C:\Users\aletib\Desktop\streakflash\images\dsp1.mbn ...
Check image APPSBL: C:\Users\aletib\Desktop\streakflash\images\appsboot.mbn ...
Check image DT: C:\Users\aletib\Desktop\streakflash\images\DT.img ...
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl
Check images ok
Download in speedup way
Open COM port success
OSBL version: 12-5035-AUSB1AM-09
osbl.mbn version:
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Open COM port success
Test communication success
Check Secure Boot is enabled
#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#AMSS to DDR success
#DSP1 to DDR success
#DT to DDR success
#APPSBL to DDR success
#backup FSBL to DDR success
#backup OSBL to DDR success
#backup DT to DDR success
#backup APPSBL to DDR success
Run HEX success
Check Secure Boot is enabled
Streaming hello success
Send Security mode success
Download partition table success
#Download DBL success
#Download FSBL success
#Download OSBL success
#Download AMSS success
#Download DSP1 success
#Download DT success
#Download APPSBL success
#Download backup FSBL success
#Download backup OSBL success
#Download backup DT success
#Download backup APPSBL success
Erase EFS2 success
Wait for rebooting ....... ok
Wait for modem set up ......
Download success - 2011/10/15 02:17:49
Elapsed Time: 82.96 sec
Click to expand...
Click to collapse
complete QLD (QDLTool3rd_20101022_GAUSB1A130500 QLDTool Upgrade Build M 2.7.4.8):
###QDLTool: M 2.7.4.8, build ID: 1.301.20101022, time stamp: Sat Oct 15 02:44:23 2011
Check image DBL: C:\Users\aletib\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\dbl.mbn ...
Check image FSBL: C:\Users\aletib\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\fsbl.mbn ...
Check image OSBL: C:\Users\aletib\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\osbl.mbn ...
Check image AMSS: C:\Users\aletib\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\amss.mbn ...
Check image DSP1: C:\Users\aletib\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\dsp1.mbn ...
Check image APPSBL: C:\Users\aletib\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\appsboot.mbn ...
Check image DT: C:\Users\aletib\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\DT.img ...
Check image boot.img: C:\Users\aletib\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\boot.img ...
Check image system.img: C:\Users\aletib\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\system.img ...
Check image userdata.img: C:\Users\aletib\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\userdata.img ...
Check image recovery.img: C:\Users\aletib\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\recovery.img ...
Check image logfilter.img: C:\Users\aletib\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\logfilter.img ...
Check image Region: C:\Users\aletib\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\RC_us.img ...
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl Boot System Userdata Recovery LogFilter RCFile
Check images ok
Download in speedup way
Open COM port success
OSBL version: 12-5035-AUSB1AM-09
osbl.mbn version:
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Open COM port success
Check Secure Boot is enabled
#Set Fast Boot Flag success
Open COM port success
Test communication success
Check Secure Boot is enabled
#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#DT to DDR success
#backup FSBL to DDR success
Run HEX success
Check Secure Boot is enabled
Streaming hello success
Send Security mode success
Download partition table success
#Download DBL success
#Download FSBL success
#Download OSBL success
#Download DT success
#Download backup FSBL success
Erase EFS2 success
Wait for rebooting ....... ok
Wait for modem set up ......
Wait for ADB device .........
ERROR[D2]: wait ADB fastboot mode timeout!
Please check that device is exist and driver is properly installed.
Download Fail! - 2011/10/15 02:45:05
Elapsed Time: 41.96 sec
Click to expand...
Click to collapse
just once i've been able to complete the procedure until:
###QDLTool: M 2.7.4.8, build ID: 1.301.20101022, time stamp: Sat Oct 15 02:22:35 2011
Check image DBL: C:\Users\aletib\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\dbl.mbn ...
Check image FSBL: C:\Users\aletib\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\fsbl.mbn ...
Check image OSBL: C:\Users\aletib\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\osbl.mbn ...
Check image AMSS: C:\Users\aletib\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\amss.mbn ...
Check image DSP1: C:\Users\aletib\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\dsp1.mbn ...
Check image APPSBL: C:\Users\aletib\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\appsboot.mbn ...
Check image DT: C:\Users\aletib\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\DT.img ...
Check image boot.img: C:\Users\aletib\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\boot.img ...
Check image system.img: C:\Users\aletib\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\system.img ...
Check image userdata.img: C:\Users\aletib\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\userdata.img ...
Check image recovery.img: C:\Users\aletib\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\recovery.img ...
Check image logfilter.img: C:\Users\aletib\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\logfilter.img ...
Check image Region: C:\Users\aletib\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\RC_us.img ...
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl Boot System Userdata Recovery LogFilter RCFile
Check images ok
Download in speedup way
Open COM port success
OSBL version: 12-5035-AUSB1AM-09
osbl.mbn version:
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Open COM port success
Check Secure Boot is enabled
#Set Fast Boot Flag success
Open COM port success
Test communication success
Check Secure Boot is enabled
#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#DT to DDR success
#backup FSBL to DDR success
Run HEX success
Check Secure Boot is enabled
Streaming hello success
Send Security mode success
Download partition table success
#Download DBL success
#Download FSBL success
#Download OSBL success
#Download DT success
#Download backup FSBL success
Erase EFS2 success
Wait for rebooting ....... ok
Wait for modem set up ......
Wait for ADB device ......... Okay
Check version ... DT:y3.752
version-baseband: AUS_100908_01_BOSS_EVT3_FROYO_RE
fastboot mode vid: 0x413c
Disable DT write check... ok
fastboot download: AMSS, checksum: 0x8bcb76e2 ...
fastboot download: DSP1, checksum: 0x29ca9e8d ...
fastboot download: DT, checksum: 0xce136d64 ...
fastboot download: APPSBL, checksum: 0xf55e1594 ...
fastboot download: boot, checksum: 0x22a73395 ...
INFO: download system would take more than 1 minute, please wait ...
fastboot download: system, checksum: 0x28ea5dd5 ...
fastboot download: userdata, checksum: 0xfe9ef69a ...
erasing 'logfilter'... OKAY
fastboot download: recovery, checksum: 0x8872a076 ...
fastboot download: rcfile, checksum: 0x77fbeecc ...
sending 'rcfile' (0 KB)... OKAY
writing 'rcfile'... FAILED (status read failed (Too many links))
ERROR[DA1]: download rcfile Fail!
Download Fail! - 2011/10/15 02:36:40
Elapsed Time: 845.13 sec
Click to expand...
Click to collapse
than after more than 10 minutes stuck on a 1Kb file i had to stop it.
still the phone didn't boot.
Any idea on how to recover from that situation?
thank you very much boys&girls!
byt he way: i will keep trying and share the infos with you.
Alessandro
Please use the Q&A Forum for questions Thanks
Moving to Q&A
i tried both version of QDLTool and nothing keep getting same error can anyone plz help....
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl Boot System Userdata Recovery LogFilter RCFile
Check images ok
###QDLTool: M 2.7.4.8, build ID: 1.301.20101022, time stamp: Sun Feb 26 12:04:07 2012
Check image DBL: C:\Users\Taylon\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\dbl.mbn ...
Check image FSBL: C:\Users\Taylon\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\fsbl.mbn ...
Check image OSBL: C:\Users\Taylon\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\osbl.mbn ...
Check image AMSS: C:\Users\Taylon\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\amss.mbn ...
Check image DSP1: C:\Users\Taylon\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\dsp1.mbn ...
Check image APPSBL: C:\Users\Taylon\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\appsboot.mbn ...
Check image DT: C:\Users\Taylon\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\DT.img ...
Check image boot.img: C:\Users\Taylon\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\boot.img ...
Check image system.img: C:\Users\Taylon\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\system.img ...
Check image userdata.img: C:\Users\Taylon\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\userdata.img ...
Check image recovery.img: C:\Users\Taylon\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\recovery.img ...
Check image logfilter.img: C:\Users\Taylon\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\logfilter.img ...
Check image Region: C:\Users\Taylon\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\RC_us.img ...
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl Boot System Userdata Recovery LogFilter RCFile
Check images ok
Download in speedup way
Open COM port success
OSBL version: 12-5035-AUSB1AM-09
osbl.mbn version:
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Open COM port success
Check Secure Boot is enabled
#Set Fast Boot Flag success
Open COM port success
Test communication success
Check Secure Boot is enabled
#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#DT to DDR success
#backup FSBL to DDR success
Run HEX success
Check Secure Boot is enabled
Streaming hello success
Send Security mode success
Download partition table success
#Download DBL success
#Download FSBL success
#Download OSBL success
#Download DT success
#DEBUG: CQDLCtrl::CmdDlHexWriteImageToNAND target error:Write unsuccessful
#Download backup FSBL Fail!
ERROR: Download fail!
Please remove the battery and try again.
Wait for modem set up ......
Download Fail! - 2012/02/26 12:13:41
Elapsed Time: 573.82 sec
I've downloaded every driver out there and nothing
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A