so i had rooted my 2.3.4 phone and installed gingerblur on it, now im dealing with a problem it seems to be in bootloop, and i have tried to wipe all the data/cache and still no boot :/ and i noobishly did not back up my phone and the gingerblur is on the internal card and not on my external, any idea? i have rsd on there but i dont know if my usb debugging is enabled.
helppp lol
Ok. Search the android development forums for fruitcake. Download the 2.3.4 fruitcake onto your computer. Take your sd card out of your phone and hopefully u have a mini sd card holder so u can plug into your computer to put the fruitcake on your external sd card. Once its on, boot into fastboot and erase system, user data, webtop, preinstall, boot, and cache. Then fastboot reboot into recovery and flash the fruitcake.
Sent from my MB860 using XDA Premium App
when i turn it down and hold the volume down there are quite a bit of options to choose from
garrett_tx said:
when i turn it down and hold the volume down there are quite a bit of options to choose from
Click to expand...
Click to collapse
Yeh keep hitting down till u see fastboot then hit up to get into fastboot
Sent from my MB860 using XDA Premium App
do i delete everything via android recovery?
alrighty sorry about all the questions
sorry not reading
and what should i type into cmd for the flashing of fruitcake
fastboot erase system
fastboot erase data
...etc...
Just go through and erase what Phalanx621 listed and then boot into recovery. Make sure you do NOT erase the recovery.
garrett_tx said:
alrighty sorry about all the questions
i have fruitcake zip on my sd card now and its plugged into usb do i press the volume up when i get to fastboot?
and what should i type into cmd
Click to expand...
Click to collapse
Alternatively, you can just use "fastboot -w" to clear the data and cache in one shot. Just thought I throw that in there...
live4nyy said:
fastboot erase system
fastboot erase data
...etc...
Just go through and erase what Phalanx621 listed and then boot into recovery. Make sure you do NOT erase the recovery.
Click to expand...
Click to collapse
But you still have to do system, webtop, preinstall, and boot.
how do i flash fruitcake? do i just NvFlash or what
After you finish erasing everything you just power down the phone and then power it up while holding down "VOL Down" and wait for it to say "Fastboot", then press the "VOL Down" until it says "Android Recovery" and then press "VOL Up". You should be able to flash using the menu there. Of course, it would help if you had Tenfar's or romracer's recovery. Do you have either one of those?
If not, you will have to go to one of their threads, download it to your computer, put it in the same folder as fastboot, reboot into fastboot, and then run the commands:
fastboot erase recovery
fastboot flash recovery "file name.img" (make sure you type in the file name exactly)
After that, you can boot into recovery and flash the fruitcakes by using "flash from zip" > "external SD"
garrett_tx said:
how do i flash fruitcake? do i just NvFlash or what
Click to expand...
Click to collapse
garrett_tx said:
how do i flash fruitcake? do i just NvFlash or what
Click to expand...
Click to collapse
Phalanx7621 said:
Ok. Search the android development forums for fruitcake. Download the 2.3.4 fruitcake onto your computer. Take your sd card out of your phone and hopefully u have a mini sd card holder so u can plug into your computer to put the fruitcake on your external sd card. Once its on, boot into fastboot and erase system, user data, webtop, preinstall, boot, and cache. Then fastboot reboot into recovery and flash the fruitcake.
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
Right there buddy.
Here is romracer's recovery:
http://forum.xda-developers.com/showthread.php?t=1204500
live4nyy said:
After you finish erasing everything you just power down the phone and then power it up while holding down "VOL Down" and wait for it to say "Fastboot", then press the "VOL Down" until it says "Android Recovery" and then press "VOL Up". You should be able to flash using the menu there. Of course, it would help if you had Tenfar's or romracer's recovery. Do you have either one of those?
If not, you will have to go to one of their threads, download it to your computer, put it in the same folder as fastboot, reboot into fastboot, and then run the commands:
fastboot erase recovery
fastboot flash recovery "file name.img" (make sure you type in the file name exactly)
After that, you can boot into recovery and flash the fruitcakes by using "flash from zip" > "external SD"
Click to expand...
Click to collapse
i do have tenfars, when i try to erase stuff it says failed to process command erase recovery error (0x180001)
im not getting an option to flash
Are u typing the command properly ? Errors show up usually if u mistype the commands
Sent from my MB860 using XDA Premium App
you have to be more specific about where you're getting these errors
garrett_tx said:
im not getting an option to flash
Click to expand...
Click to collapse
yeah i am, its saying
C:\root>fastboot flash recovery "root.img"
sending 'recovery' (32768 KB)... OKAY 2.052s
writing 'recovery'... FAILED (remote: (00180002))
Are you leaving the quotation marks out of the command?
Also, why is it called root.img? It should be a recovery. If that's what you renamed it then it should be fine. Which recovery are you using? have you tried typing "fastboot devices" to make sure it is recognized?
garrett_tx said:
yeah i am, its saying
C:\root>fastboot flash recovery "root.img"
sending 'recovery' (32768 KB)... OKAY 2.052s
writing 'recovery'... FAILED (remote: (00180002))
Click to expand...
Click to collapse
i guess i dont know the orginal recovery name from tenfars cwm so its not flashing it it just fails every time
im so lost right now -____-
Related
Im having some weird issues with ClockworkMod Recovery v2.5.0.1. I have flashed the recovery image without issues. I have been able to boot into recovery.
The problem I am having is that after rebooting and going back into recovery I am left with the stock dell recovery.
Any ideas?
I have the same issue. Reflashing the recovery gets me back to clockwork recovery.
Oh, and also, I can't reboot into recovery or initiate a backup from ROM manager, nor can I complete a backup from recovery, it stalls at data.img.
MSigler said:
I have the same issue. Reflashing the recovery gets me back to clockwork recovery.
Click to expand...
Click to collapse
I reflash recovery and it works, but after 1 or 2 reboots I am back to stock recovery again.
Paul @ Modaco has fixed this and I can confirm it works.
http://android.modaco.com/content/dell-streak-streak-modaco-com/316229/19-aug-streak-2-1-downloads-how-tos-rom-superboot-recovery/
crash6 said:
I reflash recovery and it works, but after 1 or 2 reboots I am back to stock recovery again.
Click to expand...
Click to collapse
Exactly, and the modaco fix linked above fixes it.
Guys, having issues with clockwork recovery images as well
Heres exactly what i'm doing and please tell me where i'm going wrong.
-Power on device while holding camera button
-Says "waiting for SD detect..."
-wait
-Tap fastboot in top right corner
-"waiting for USB FastBoot detect..."
-Plug usb in and now it says "FASTBOOT_MODE" in bottom left
-then in terminal (on a mac)
Code:
$ fastboot -i 0x413c flash recovery recovery-clockwork-streak-2501.img
sending 'recovery' (3280 KB)... OKAY
writing 'recovery'... OKAY
$ fastboot -i 0x413c reboot
rebooting...
$
Before rebooting it says "starting RECOVERY writing" then "Download RECOVERY Done!"
(also done it without fastboot -i 0x413c rebbot, but by pulling the battery and powering up into recovery and still same thing)
Device restarts and i hold both volume keys and it comes in the stock recovery..
i select option 2 (update.pkg from storage card) and now screen is just black
adb won't connect in terminal.
I've tried about 4 different clockwork recovery images and all the same thing.
Just to test i flashed the stock 02 recovery image from the modaco thread and the home and menu button's lights were flashing so its flashing them right?
Any help? my brain is melted.. i stayed up all night learning terminal, adb and fastboot.
----update---
Ok i got it.. for some reason this did it
MAC – Open a terminal window to the directory containing the files, and type ‘chmod +x install-recovery-mac.sh’ followed by ‘./install-recovery-mac.sh’
Click to expand...
Click to collapse
Why does that work over me typing it out? if i open up install-recovery-mac.sh it contains the following "./fastboot-mac -i 0x413c flash recovery recovery-clockwork-streak.img"
is the "./" before fastboot whats making it work?
I've rooted and unlocked my MoPho as of now.
I've attempted to flash joker and romracer's recovery.
However, when I go to check to see how CWM is doing, I only get 4 options:
reboot system now
apply update from sdcard
wipe data/factory reset
wipe cache partition
Both of the videos I have watched show other options such as backup's and such. I'm not sure what I'm doing wrong, and any help would be appreciated!
Which clockwork are you using?
I have used this:
http://forum.xda-developers.com/showthread.php?t=1216143
and the
AIO root
The standard cwm (The one from market) gives me all the options.
However, when I try to flash jokers or romracers cwm recovery I just get the 4 basic options again.
Fastboot erase recovery and then use fasboot to install the new, one romracers or jokers your choice. If flashing CM9 id use Jokers.
That is the method I attempted to flash both of them with.
I still get the triangle with the arrow and the android by it that I have to press both the up and down volume buttons to show the recovery screen.
cardinalsfre said:
That is the method I attempted to flash both of them with.
I still get the triangle with the arrow and the android by it that I have to press both the up and down volume buttons to show the recovery screen.
Click to expand...
Click to collapse
Thats the stock recovery.. You ARE unlocked correct? and you flashed it by putting phone into fastboot and with CMD pushing the new recovery?
Yes, I do believe I am unlocked.
Root check shows that I am rooted
Upon boot the phone says, "unlocked"
Yes, I am using the CMD prompt to attempt to flash, following qbking's video instructions.
Edit: Also, the CMD prompt says it has completed the recovery flash.
So you did all this below?
"moto-fastboot erase recovery
moto-fastboot flash recovery recoveryfilename.img"
and it came back saying
"sending 'recovery' (4780 KB)... OKAY [ 0.490s]
writing 'recovery'... OKAY [ 0.544s]"
If so id to redownload the recovery.img and try again..
That worked, at first.
Upon first boot up I was greeted with the right recovery module.
When I went restarted to flash my ROM I was brought back to the original Android Recovery.
Edit: Should I flash on first boot up or should I wait until I can get the recovery to stick?
You have to go into the files and rename the stock recovery to ".bak" to make the new one stick. If I can find the link again, I will post it , or you can Google it? I think that's how I found it to begin with.
Thanks, that worked!
The title basically describes my problem, essentially I some how managed to completely filled up my internal storage and now my phone will not start. I did try formatting but it give me error make_ext4fs failed on /dev/block/etc etc
Any clue on what I should do?
S-OFF HBOOT 1.93.0002
Mobilicity Stock ICS Rooted
4EXT Recovery
dpsi said:
The title basically describes my problem, essentially I some how managed to completely filled up my internal storage and now my phone will not start. I did try formatting but it give me error make_ext4fs failed on /dev/block/etc etc
Any clue on what I should do?
Click to expand...
Click to collapse
Did you try boot into recovery & delete unwanted data?
dpsi said:
The title basically describes my problem, essentially I some how managed to completely filled up my internal storage and now my phone will not start. I did try formatting but it give me error make_ext4fs failed on /dev/block/etc etc
Any clue on what I should do?
Click to expand...
Click to collapse
I'm going to list the following commands you should do. I assume that you know how to use Fastboot and the like and already have the drivers set up. If not, there are threads out there that explain in detail on how to do that.
Ensure the battery is fully charged before doing anything
Take out the battery and reinsert it. Hold the Vol Down button and press power button. This will take you into bootloader mode. Use the Volume Up/Down buttons in the bootloader mode to boot into FASTBOOT mode. You will know if you're in the fastboot mode when you see the text "FASTBOOT" highlighted in RED. If you see the text "BOOTLOADER" highlighted in BLUE, you are NOT in fastboot mode.
After you have entered fastboot mode, plug in the usb cable. The highlighted "Fastboot" text should change into "Fastboot USB". After that, open the command prompt. You should have had the fastboot drivers set up before starting this.
Input the following commands EXACTLY (including their respective case):
fastboot erase cache
fastboot erase system -w
After that's done, reboot into recovery and re-install your ROM of choice. NOTE: Upon doing those fastboot commands, you will lose all of your data and your ROM on the phone.
crazykas said:
Did you try boot into recovery & delete unwanted data?
Click to expand...
Click to collapse
If formatting won't work, how do you think I can delete files?
Keylogger_0 said:
fastboot erase cache
fastboot erase system -w
Click to expand...
Click to collapse
Code:
erasing 'system'...
FAILED (remote: not allowed)
finished. total time: 0.000s
Any other ideas?
dpsi said:
If formatting won't work, how do you think I can delete files?
Code:
erasing 'system'...
FAILED (remote: not allowed)
finished. total time: 0.000s
Any other ideas?
Click to expand...
Click to collapse
Run this tool http://forum.xda-developers.com/showthread.php?t=1762936
Take note that this installs a tmobile ruu so you need supercid. Be sure to follow instructions.
Sent from my Amaze using xda app-developers app
Keylogger_0 said:
Run this tool http://forum.xda-developers.com/showthread.php?t=1762936
Take note that this installs a tmobile ruu so you need supercid. Be sure to follow instructions.
Sent from my Amaze using xda app-developers app
Click to expand...
Click to collapse
That did it, thanks.
i juast flash neutrino cm7.2 over cm10 a while ago, it boots but after installing gapps it goes black screen. waah! i tried to find solutions over the entire thread but none exept for RDS. please help. i have already managed to flashed a CWM recovery in fastboot. installed already still blank screen after reboot.
anyone? i have red i can install rom in fastboot but how? does this solves my issue?
Flash it in fastboot. I believe there is info in a sticky but if you search you'll find it pretty easy.
Sent from my MB860 using xda app-developers app
AnotherBill said:
Flash it in fastboot. I believe there is info in a sticky but if you search you'll find it pretty easy.
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
please stay for a while, can't find the exact thread. first time i got boot loop.
i can no longer boot into fastboot, why?
From power off state, press and hokd down volume button and pressing the power button is not putting you into the menu with fastboot? How far does it get? Perhaps your battery is too low?
Sent from my MB860 using xda app-developers app
AnotherBill said:
From power off state, press and hokd down volume button and pressing the power button is not putting you into the menu with fastboot? How far does it get? Perhaps your battery is too low?
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
phone can boot to fastboot, the error is from cmd "fastboot doesnt recognize the internal or external command or something. help me.
Please tell us wich command are you typing... in one ocasion I have that problem too and it solved when I install the recovery (clockworkmod touch)
Enviado desde mi MB860 usando Tapatalk 2
to lionhart_1912 i tried this method before and managed to install cwm touch problem is as if the comand promt is not detecting the atrix anymore. what could i probably missing?
upndwn4par said:
1) Set up fastboot as described in post #2
2) Download the most recent CWM available Link
3) Place recovery image in c:\Android
4) Type the following commands (no quotes, hit enter after each command)
4a) "fastboot flash recovery recovery-clockwork-5.0.2.0-olympus.img" (note: the name of your recovery image may be different)
4b) "fastboot reboot"
If everything was successful, you should see something like this:
Code:
c:\Android>fastboot flash recovery recovery-clockwork-5.0.2.0-olympus.img
sending 'recovery' (4824 KB)... OKAY [ 0.575s]
writing 'recovery'... OKAY [ 0.592s]
finished. total time: 1.169s
c:\Android>fastboot reboot
rebooting...
finished. total time: 0.002s
c:\Android>
Click to expand...
Click to collapse
gradd said:
to lionhart_1912 i tried this method before and managed to install cwm touch problem is as if the comand promt is not detecting the atrix anymore. what could i probably missing?
Click to expand...
Click to collapse
solved it. whew. . .unrooted now back to gb2.3.4 att.
please confirm, can i install cm7.2 via fastboot without rooting? tnx. and cmd command sir for installing custom rom. thank you:victory:
From Mrom.
Playing with stock sbf 141 which i have RSDlite'ed a few times - last time after updating to 145 I tried to root and it said no room left, so this time after clearing data/cache/dalvic, I formatted system.
That apparently cost me my bootloaders and now when I boot I get "failed 1", vol up yields fastboot (RSDlite recognizes it as fastboot), vol down yields a quick flash of failed 1, entering recovery, and then blank screen and nothingness (RSDlite doesn't recognize it. It will not let me flash a 4.0.0.2 image.
mhelpmmmm
Thanks!
Your boot is fine. Just flash a custom recovery via fastboot.
ravilov said:
Your boot is fine. Just flash a custom recovery via fastboot.
Click to expand...
Click to collapse
1. power on and vol up:
failed to boot 1
PwrReason: PWR_KEY_PRESS
Starting Fastboot Protocol Support
(connect to PC)
fastboot devices:
"TA207.... fastboot"
fastboot flash recovery recovery-en-goapk-0630-1029.img
pause
"E:\My Documents\CELL PHONE and WAP\MOTO ATRIX 4G\CWM RECOV 4.0.0.2\atrix4gcwm2>f
astboot flash recovery recovery-en-goapk-0630-1029.img
sending 'recovery' (4612 KB)...
OKAY [ 0.287s]
writing 'recovery'...
FAILED (remote: (00180004))
finished. total time: 0.357s
E:\My Documents\CELL PHONE and WAP\MOTO ATRIX 4G\CWM RECOV 4.0.0.2\atrix4gcwm2>p
ause
Press any key to continue . . ."
That particular flash I have used many times with no probs.
Path to disaster:
wipe data/cache/Dalvic
format /system
boot (successfully) to RSD (Power+vol up)
use RSDlite to flash 141 sbk as I have done about 6 times with no prob. (sbk is in root of PC partition and dragged it to RSDlite window)
Went through 99% and rebooted for switch to BP Pass through and hung until fail because phone did not reboot, but stopped at failed to boot 1.
EDIT: phone showed :
Flashing partition recovery
Flashing MBR to device
Failed to process command flash: recovery error (0x180004)
KrisM22 said:
1. power on and vol up:
failed to boot 1
PwrReason: PWR_KEY_PRESS
Starting Fastboot Protocol Support
(connect to PC)
fastboot devices:
"TA207.... fastboot"
fastboot flash recovery recovery-en-goapk-0630-1029.img
pause
"E:\My Documents\CELL PHONE and WAP\MOTO ATRIX 4G\CWM RECOV 4.0.0.2\atrix4gcwm2>f
astboot flash recovery recovery-en-goapk-0630-1029.img
sending 'recovery' (4612 KB)...
OKAY [ 0.287s]
writing 'recovery'...
FAILED (remote: (00180004))
finished. total time: 0.357s
E:\My Documents\CELL PHONE and WAP\MOTO ATRIX 4G\CWM RECOV 4.0.0.2\atrix4gcwm2>p
ause
Press any key to continue . . ."
That particular flash I have used many times with no probs.
Path to disaster:
wipe data/cache/Dalvic
format /system
boot (successfully) to RSD (Power+vol up)
use RSDlite to flash 141 sbk as I have done about 6 times with no prob. (sbk is in root of PC partition and dragged it to RSDlite window)
Went through 99% and rebooted for switch to BP Pass through and hung until fail because phone did not reboot, but stopped at failed to boot 1.
EDIT: phone showed :
Flashing partition recovery
Flashing MBR to device
Failed to process command flash: recovery error (0x180004)
Click to expand...
Click to collapse
Jw, why use 4.0.0.2 when 5.0.2.0 and 5.0.2.7 are available?
Try renaming the img to just recovery and then flash it via fastboot
Sent from my MB860 using xda app-developers app
palmbeach05 said:
Jw, why use 4.0.0.2 when 5.0.2.0 and 5.0.2.7 are available?
Try renaming the img to just recovery and then flash it via fastboot
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your time. I have 5020 and 5027 as zip. I d/l'ed 5020 as image and tried it and same thing, even with the rename to just recovery.
KrisM22 said:
Thanks for your time. I have 5020 and 5027 as zip. I d/l'ed 5020 as image and tried it and same thing, even with the rename to just recovery.
Click to expand...
Click to collapse
Odd, idk why that is happening
Sent from my MB860 using xda app-developers app
palmbeach05 said:
Odd, idk why that is happening
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
ditto, but huge thanks for your looking in!!!
any ideas? anybody? anything I can do in fastboot?
fleshing this out, I find that if I power on with no vol buttons pressed, I get failed boot 1, I am in RSD mode. So I can re-RSDlite 141, but again get failed boot 1. The reason for this is that when I was last on 141, I ota (wifi) updated a 20mb file to 145. And as it is reported across the net, you can't go backward.
Anyone found a fix for "going backward"?
Nevermind, I'm up. The solution may have been to remove the SD card while doing stuff. Or else I got lucky.