Openwatch - Android Q&A, Help & Troubleshooting

Coming here from [http://forum.xda-developers.com/showthread.php?t=554551], since I can't post there anymore:
I'm using Sony Ericsson X10i with a MBW-150 and Openwatch 1.5 of course. I recently upgraded Android to 2.3.3 and now my watch randomly disconnects and doesn't reconnect, even if I leave my phone and then return. Usually it took <30 seconds for them to reconnect, but I have given them minutes and still no reaction. I have to push a button on my watch to make it reconnect.
Any upcoming solution on this, or any information, I would be thankful.
/Oli

since not being allowed to post in the development forum (http://forum.xda-developers.com/showthread.php?t=554551]), i have to ask here:
firt of all, i'm using a google nexus s with NSCollab 1.0.39 and it works pretty good, so you may add the device to the "tested or reportet" list.
but i have two (minor) issues:
the sender and subject is not displayed on the watch when i recieve an email, using the modded gmail 2.3.5 (http://forum.xda-developers.com/showthread.php?p=16265599), neither with "classic" notification nor "all notifications".
i want to start the music app (or maybe other apps, mytracks for gps tracking for example) remotely. i can easily find out the package, its com.google.android.music, but which classname do i have to fill in and where can i find it out?
nevertheless, thanks for this great app.

I am also not allowed to post in the previously mentioned thread in the development section, but have some questions:
I recently purchased the thinkgeek watch (apparently without reading the development thread thoroughly enough) and it does not work quite as well as would be desired. As stated before, when I "test" the connection after following the instructions for the LM watches, it vibrates, but does not activate the screen. I am using the fake mdw-150 device type. In terms of notification functionality:
At first I was able to connect to the watch, and it gave me the option of two different messaging lines and global notifications and the whole nine yards. Subsequently, it did not give me these options. I think something funny happened with the paired devices in the bluetooth menu that I have to figure out. All functionality I am referencing here is after the options available to me was reduced.
Phone Calls: Vibrates, no text
SMS: Nothing
Alarm: Vibrates, No text
Media: Nothing
Gmail: Nothing
That is the extent of my testing at this point. I'm going to try fixing the goofyness that is going on with my bluetooth paired devices, then possibly try installing cyanogenmod and seeing if there's any root tools I can use that might help (my phone is a rooted nexus s running stock 4.0.3 if that helps you.) I'll update this when I have more thoroughly explored this to the best of my abilities.

Related

Continuous Alerts

Does anyone know of a program that can provide continuous alerts (ring/vibrate) until I acknowledge and turn it off? I get a one time ring or vibrate alert but often don’t notice the one short vibrate. So, unless I look at the phone I will never know I missed a call, have an email, or anything else. I have a Treo 600 also and there is a real handy program called Treo Butler that does just what I need but it is only for Palm OS. I use the T-Mobile PPC 2003 phone.
Thank you in advance.
Joe
Quit easy:
SPB Plus comes with repeating alarms and many more:
The close (X) button is trained to close programs (as well as minimizing them)
Easy-to-use task manager as a pop-up menu on the X button
Multiple windows support for Pocket Internet Explorer
Full screen mode in Pocket Internet Explorer
Repeating sound for appointment, task and clock alarms
Battery monitor on the Today screen
Storage monitor on the Today screen
Program and document shortcuts for the Today screen
Localized for main languages
Check:
http://www.spbsoftwarehouse.com/products/pocketplus/?en
regards,
Do you know if it has repeating alarms for email, missed voice calls, and voice mail? it says "Repeating sound for appointment, task and clock alarms" but it does not sound like it has any phone related repeats.
Thanks.
Joe
It's a windows configuration thing
I guess, this is a windows configuration thing.
You can configure warnings for different events right within Windows mobile. Based on this, it should be possible.
But just to be on the save side: Download a trial version and try it to make sure it works in the way you want.
regards, Koponet
Continuous Alerts / Repeating Alarms
I tried Pocket Plus 2.0 and it does not seem to enable repeating alarms for Mised Calls or Voice Mail. Anyone know if there is a way to do this?
I have the same issue and e-mailed spb to see if/when they would be suppor ing this. They would not commit, but the CTO said they always 'listened to their customers' ;-) I did get hold of a beta version of 'Super Alert' from www.pocketfillers.com, that covered these functions, but it was designed for WM2002. I have not been able to get another beta version for WM2003, and have been too scared to try the old version on my XDA 2 :-o I''l try and get hold of the guy at pocketfillers to see if they have an update.
Regards
Chris
FINALLY
I have been whining about this for MONTHS. No repeating alerts for missed calls, etc.
To answer that previous post, NO, that software doesn't do it. Repeating alarms for calender crap etc, but not phone related functions.
I've been saying that most all cell phones have repeating alerts, but despite searching I haven't found a single thing to accomplish this on the PPC.
Cheers.
The current release of 'super alert' does not contain the functionality, but if you read the post, you'll see that I received a beta version of the next version, that adds SMS, email and voice mail repeating alerts. It has one or two bugs, but works pretty well on the whole. They were due to release it last year, but must have run into some development issue. Also, I have not tried it since I upgraded to WM2003.
PocketZenPhone
Isn't this exactly the functionality provided for XDA-II, for free, by PocketZenPhone ?
I have this set so that any missed call or incoming SMS sets the red LED alert flashing with no time limit - so a quick glance shows if something has happened that I haven't noticed/acknowledged yet.
This seemed like the most battery-friendly way of ensuring a long-term notification.
Thanks for the pointer to pocketZenPhone. It seems to have some usful features, but it looks like it only supports a 'visual' repeating alert, as opposed to an 'audible' repeating alert for the phone functions. Am I reading that correctly? If I am, then I think this is available in the basic WM2003 os under 'notifications' I set this yesterday based on a post in another thread, and it is a big help, but you have to remember to 'glance' at your device from time to time. I think everyone is looking for the audible repeating alert to remind those of us that can't remember to look. Aren't we a sad lot?

[Q] How can I prove that my Android Device (SGS2) has been used by someone else?

Back Story:
My phone was left in my house (shared with other people) yesterday while I was at work. When I got home I was checking missed calls, voicemail etc and I noticed that some text messages were missing. I looked a bit more and it seems that 2 seperate sms message threads had been deleted and a number of contacts had been deleted too. Now, this has happened before to another housemate but we couldn't prove that it had been done. We are pretty sure we know who did it but I need concrete evidence that the phone was accessed.
Phone Specs: Samsung Galaxy S2, rooted, running CM7 latest nightly. I also have Cerebrus installed if that helps.
So my questions are as follows:
1) Is it possible to see what activity was happening on my phone yesterday? I don't have any "logging" software running.
2) Is it possible to retrieve the deleted SMS messages?
I work in IT so am pretty tech savvy, just not in the workings of the Android OS!
All help greatly appreciated.
P.S. I have already been able to restore the contacts that were deleted using the restore functionality in gmail.
The short answer is no. It is, at least in theory, possible to "undelete" stuff, but it isn't usually practical. Even if you did, you wouldn't have "proof" in the legal sense.
That said, I have been involved in a similar situation. Here's the approach we used. It is reasonable to assume that this behavior will continue. Therefore, get some logging software installed. Do NOT talk about it. Do nothing out of the ordinary. Just quietly install some software that will let you see what is going on with your phone. I know there are apps which will email an alert when accessed, snap a pic from the front-facing camera, log SMS to email, remotely lock the phone, etc etc. Based on what you need to accomplish, get these set up and then BE PATIENT. wait a few days (unless you normally leave your phone at home) and leave it again when the person in question might be around.
A pic would be sufficient proof I would think for confronting a roomie. If nothing else log your sms's. I use integrated Google Voice so I'd get an alert on my PC even if I didn't have the phone (very handy, that), but that may not be an option for you.
I also use SeekDroid for remote locking, and I -think- there's a remote camera provision, but it's at a higher paid level than I am subscribed to. At any rate that's my suggestions.
Or, the simple solution: Put a better lock code on your phone.
-JB
A lock code would help prevent the behavior in the future. For catching the vandal red-handed, I believe an app like Gotcha! may do what you need.

HTC Fetch

These look like they would be fun to have:
http://www.htc.com/www/accessories/htc-fetch/
If they start approaching US$25, I'll probably grab one.
ive got one. its a nifty little gadget.
marctronixx said:
ive got one. its a nifty little gadget.
Click to expand...
Click to collapse
Mine arrived from Best Buy today. Does anyone know if there's a way to keep the proximity functionality without having the notification always show in the notification bar? I went to app settings, and it's not allowing me to disable it.
in the stock config, the icon is there when activated, just like the nfc icon.
marctronixx said:
ive got one. its a nifty little gadget.
Click to expand...
Click to collapse
marctronixx, I think I recognize you from a few previous phone forums. :good:
This device sounds like it wold be an ideal 'Trusted Device' along the lines of the Moto-X implementation where the phone lowers its security barriers when paired with a specific Bluetooth device. I've even suggested as much to HTC.
I'm wondering... Have you tried it with any of the myriad of tasker-like apps out there to try to replicate the feature?
hey!
ive only used it as directed, but if you pose a scenario i can experiment with, perhaps i can help you answer your question?
@marctronixx
Big apologies for long delay.
Here is a scenario... There is an app called Pebble Locker that although designed for a Pebble watch, allows any BT device to act as a trusted connection and automatically disables PIN lock. If no Pebble or other trusted device is conected, PIN lock returns. (Unfortunately it doesn't work with pattern lock or fingerprint scan). The idea is that if you have a separate device near the phone, it lowers the barrier. If you leave the device, the barrier rises again. I'm hoping the Fetch would work for that as it would almost always be in my pocket or nearby.
Of course, it would be better if it was something built in to HTC devices. Some time ago I stumbled across their SDK and it seems to be pretty powerful but I'm not a programmer so...
-Separate note: I've seen some discussions that the KitKat update on the HTC One's breaks Fetch. Not too many confirmations, but no denials either.
Hello! I have 2 Fetchs. One for the One Max and One for the One m7. My Fetch works great with One m7 on Kitkat.
Cannot find the discussions... I´m curious
HelloBoy26 said:
Hello! I have 2 Fetchs. One for the One Max and One for the One m7. My Fetch works great with One m7 on Kitkat.
Cannot find the discussions... I´m curious
Click to expand...
Click to collapse
Glad to hear it. I found a couple of places where two or three people reported problems.
http://androidandme.com/2014/02/news/sprint-htc-one-android-4-4-2-update-available-for-manual-pull/
http://htcsource.com/2014/02/sprint-releases-htc-one-android-4-4-2-update/
Just search 'fetch' within the threads. I found them today by Googling 'HTC Fetch KitKat not working'
@Faxman, thank you. No Problems here. Fetch and Kitkat does the job. Pi pi pi pi pi pi pi pi
Looks like Best Buy US is starting to sell the Fetch for $29. Looks like I'll be owning one soon.
I got my Fetch from BestBuy (see above) and it works as advertised. Only 75% battery charge out of the box.
It indeed showed up as a Bluetooth device in Pebble Locker (see farther above) so I am able to set the phone to remain unlocked while in range of the Fetch and PIN lock if not.
Now, for all you actual developers out there, here's a link to the SDK for the Fetch. Let the fun begin.
I installed the Sprint OTA KitKat update yesterday and the fetch continues to work... sort of. I've found that if I turn the fetch off I have to go in and find it again and pair again.
I also noticed and downloaded the HTC Fetch app in the app store.
It has a nicer interface and apparently a couple of additional features (including the ability to connect to other BT 4 devices)
It apparently connects differently as you can run it without it being paired in regular BT settings and it doesn't retain the annoying Fetch icon in the notification area. BUT, since it no longer shows as a BT device, the Pebble Unlocker app that I use to simulate 'trusted device' doesn't see it and doesn't keep the phone unlocked.
I'm hoping there will be some interest in the developer community because I think there are some enhancements that can and should be made to either or both of the apps.
For one, I'd like to be able to disable change the tone or somehow further delay the alarms that go off when out of range. I do that far too often. However, when that feature is disabled, it also disconnects the BT connection and as above defeats the trusted device functionality mentioned above.
I mostly want to use it so my phone is secure if I'm not nearby and occasionally use the separation alarm feature if I am in a situation where one or the other might be left behind.
i have not noticed any issues with fetch after the sprint 4.x update. im stock non rooted.
thanks for the heads up on a fetch app. ill go smoke it over...

[Q] Need advice on Lollipop native / apps please

Hi All.
I've taken the plunge and ordered my S6 Edge 128gb in Emerald Green.
I'm sure everything will be just fine, but I was hoping for some pointers from the Android users for certain apps and features I use on the BlackBerry.
I've been using BlackBerry for a few years now (Z30 and a Passport) but I'm wanting a change and LOVED the look of the Edge. Just wondering if you fab people could give some assistance in either clarifying what Lollipop does natively or suggesting apps I could use to achieve a similar effect.
1. One of the things I think I will miss quite a bit is the notification light on the BlackBerry. Hence why I ultimately went with the Edge. I know the edge can have notification lights for the top 5 contacts (thats enough for me) showing when placed face down.. however. just two questions connected to this:
* Does the notification light continue to flash if you miss the call / message? i.e. continue until you pick the phone up and look
* I'm sure the notification doesn't work with the phone facing upwards or stood on a stand, but do you think this is something that a rom flash could fix? or even, maybe an app..
2. BlackBerry Hub really is very good. You have all your communications in one location, save opening text apps, Social media, then mail apps etc. How does Lollipop 5 handle messaging? Does it have a similar type of hub?
3. I run an app called Hubb++ on my Passport. Here I can tell notifications to switch off and on during certain time periods. Ideal after a long hard day in the office, get home and my phone automatically goes into silent from 8.30pm until 7am. (except for contacts I've highlighted as important and to break the silence). Again, does Android lollipop have anything like this or is there an app that does similar?
4. Bluetooth connection to the car. I have to be honest and say the BlackBerry really does nothing special in the arena for me. It's a basic rSAP connection type which allows contacts etc to be sent to my car (Audi A7). How is Bluetooth within Android Lollipop? Last time I used Android, rSAP was not working and I had to root the phone and install all sorts to get it going. To be honest, my days of rooting and messing are over (I know, that's part of the fun of Android) I'm too busy these days to spend the time learning and testing etc. I just want the connection to work. Any input please.
That's basically it. Any input and recommendations would be received with thanks.
1. There's notification light blinking on the top left of the phone for miss call, message /SMS or social app/ voicemail, email etc... You can get a short vibration when you pick up your phone and you have miss call or SMS message as well /not sure for other notifications/
2. I'm sure there's some apps you can find for the most messaging services on Google play, buy better give it a try on few and see what's best for you
3. There's apps to switch your profiles according to time settings, but I thing S6 has option to do that as well with detecting your GPS location /home, work, etc.../
4. The bluetooth should be just fine. I have no problem with Audi A5
pacho_bs said:
1. There's notification light blinking on the top left of the phone for miss call, message /SMS or social app/ voicemail, email etc... You can get a short vibration when you pick up your phone and you have miss call or SMS message as well /not sure for other notifications/
2. I'm sure there's some apps you can find for the most messaging services on Google play, buy better give it a try on few and see what's best for you
3. There's apps to switch your profiles according to time settings, but I thing S6 has option to do that as well with detecting your GPS location /home, work, etc.../
4. The bluetooth should be just fine. I have no problem with Audi A5
Click to expand...
Click to collapse
Just wanted to say thanks for taking the time to answer.
Sent from my Passport using Tapatalk

App idea: tell time through vibration

Hello,
I have recently bought a watch with Wear OS 2. I quite like it, but I am missing one nice feature from competition watches. I am blind. Apple watch and some other specialised devices can tell you time by certain vibration patterns. e.g. 5:30 am - 5 short vibrations, then pause, then 3 short vibrations... etc. I am thinking about creating something with Tasker, but this would require connection to the phone all the time.
Would someone take this as an interesting project? Or maybe would someone give me a helping hand in developing this? I am a programmer but never programmed for Android unfortunately.
what would be your preferred way of activating the vibration?
i'm thinking about an empty watchface which could, whenever it's activated either by gesture or button, start the time pattern.
also please let me know how exactly such a vibration pattern would best look like. (first hours then minutes, ok. what about 11:34 ? also seconds are not needed i guess?)
I might do a quick app
I really like this idea because the watchface would be sooo battery friendly
btw: any idea for a good name? I think I would go for "time feel watchface" if no one's got a better idea
if everything goes right, I will have a first test version by tomorrow
update: basic watchface running. gonna implement vibration pattern tomorrow.
need info:
-i assume it's no problem that the watchface is always black, this is to save as much battery as possible
-any symbol maybe for blindness i could use for the icon / watchface preview?
-should the vibration pattern start again if you touch the screen?
----I find this problematic because screen usually is only on for a few seconds, maybe i have to let it stay on as long as the pattern is running and it would go to standby immediatly after that... so i'm not quite sure how to handle this
-is a 24 hour mode needed or should it even be default?
Hi, thanks for your response. Yes this is aimed at blind people specifically, I am blind my self. Yes blind people use smart watches, mostly from Apple, but there are also some users of Android Wear OS.
wow I read your reply just now and it seems cool. I have a few points:
A watch face is an interesting idea, but for example I would prefer it to be just an app which even does not launch a screen, does the vibration and exits. I use information I have on my watch face, I use screenreader to read info about upcoming events, battery etc. You may ask why do I need this vibration way of telling time when I can read it from the watch face? Well it is more discrete and does not bother surroundings. I could assign a specific gesture in the screenreader which would launch the app and do vibrations.
Honestly, I am probably the only Wear OS user in Czech Republic and I have to get connected with other blind people to get their opinions.
I think 12 hour format should be OK so far.
so basically you just need an app that vibrates the time when launched?
for example 5:33 x x x x x pause x x x pause x x x?
then i need to rethink that. but that should be even easier
Yes, for me this would be enough. Ideally if the app would do it without displaying any window so that the screenreader does not read anything. Is that possible? I am sorry I did not clarify this at the begining.
As to how to do vibrations:
I imagine this schema:
1 - one short vibration
2 - two short vibrations
3 - three short vibrations,
4 - four short vibrations,
5 - one long vibration
6 - one long vibration, short pause, one short vibration
...
9 - one long viberation, short pause, four short vibrations
0 - long vibration, short pause, long vibration
e.g.
10:56 - short vibration, long pause, long vibration, short pause, long vibration, long pause, long vibration, long pause, long vibration, short pause, short vibration
here's a first prototype.
do you know how to install apk to your watch? you need to enable ADB and WiFi Debugging to install wireless over ADB
let me know what you think. is it too fast?
i know it's not perfect, for example you need to exit the app to relaunch the pattern. i can fix that - can i let the app run the pattern and immediately exit? so you wouldn't need to exit manually everytime
Hello, you are amazing! So fast! Thank you very much. I tried the app.I have few questions:
1. Vibrations are quite fast. Could you make it a bit slower? Let's say that the long pause among numbers could be 1 second?
2. Could you make it so that the app does not open any window? That after launching the icon everything happens in the background?
3. Will this work also on phones or only on watch?
Thank you so much. If you don't mind, I would like to spread the word about this among other Wear OS users.
1. sure. i actually use two different long pause durations: one between the digits and one between hours/minutes
---i need to do this because leading zeros are ignored. i could also do leading zeros so you always have 4 digits and pause can be constant, but imho that's not as efficient
2. In this new version the window exits after launch, I hope that's fine. also fixes not working on second launch and makes the app not stay in RAM.
3. This version is only for Wear OS, but I could copy it to an android app.
Of course you can spread this app however you like. when it's done I can attempt to publish it to the play store.
please check this new version. is it still too fast?
also 12 a.m. seems to be treated as "0". should i change this?
new version with fixed 12 a.m.
if you are fine with this state i'm going to finish it and publish it to play store
Wow thanks, this look very well. I still have a problem with the app creating a window. The problem is that when the window is created and closed again, the screenreader reacts to that - in this case after closing the app window it reads info about previously opened window or a watch face. That is a bit problematic as my idea was to not make any sound at all, so that one can check for the time discretely.
Would it be possible to not display any window at all? Maybe running as a service which would be waiting for the launcher icon to be pressed? I am not good at Android internals so maybe it is a stupid idea.
krecoun said:
Wow thanks, this look very well. I still have a problem with the app creating a window. The problem is that when the window is created and closed again, the screenreader reacts to that - in this case after closing the app window it reads info about previously opened window or a watch face. That is a bit problematic as my idea was to not make any sound at all, so that one can check for the time discretely.
Would it be possible to not display any window at all? Maybe running as a service which would be waiting for the launcher icon to be pressed? I am not good at Android internals so maybe it is a stupid idea.
Click to expand...
Click to collapse
now I understand the problem. I need to look into this later. but I guess that's doable.
update: I tried to replicate your problem. I enabled talkback and started the app. only thing I can hear is a click when launching the app. is that what you are talking about? If so, I don't think that can be prevented as it's caused by the launch of the app.
-sorry, I didn't read correctly. so the problem is that it starts reading the previous app. that's a problem. I didn't find an easy way to fix this - as far as I read you cannot launch an app without starting an activity. at least not with an app. maybe i could make the watch sleep after launching? or you can find a solution with tasker or something similar
Hypothetic idea:
Let's say that the app would be running as a service after start. I don't know if this is possible in Wear OS.
1. After clicking the launcher icon, check if the service is already running.
2. If not, launch it. You can display even a window and close it, well while launching the service we probably won't avoid that but that's acceptable.
3. If yes, don't show anything but send some intend / activity / however it is called in Android to the running service which will do the vibration.
Is it doable?
the thing is afaik an app launch always needs to launch an activity.
if i'm wrong i hope someone corrects me
How about this?
https://stackoverflow.com/questions/2704084/how-to-launch-an-activity-without-a-ui
krecoun said:
How about this?
https://stackoverflow.com/questions/2704084/how-to-launch-an-activity-without-a-ui
Click to expand...
Click to collapse
it says you can have an app that's a service only, which starts on boot an can receive intents. but how do you call it? you need to activate something. you could maybe do it as a compilation, but as I see it it's not possible by launching an app.
I see two easy solutions:
-let the app run in an empty window
or
-let the device go to standby after vibration
update: I looked into this a bit more. I guess my solutions would not work. an app can't send the device to sleep and if I show an activity the screenreader always reads the app name...
so I can't help you any further. maybe someone else can
Hi, sorry for looong delay. I must say that I am using your app quite successfully. Sometimes it talks but mostly it does not and vibrations work as expected. Great work. Maybe you could release this app into Playstore, some other blind people could benefit from that or make more suggestions.
krecoun said:
Hi, sorry for looong delay. I must say that I am using your app quite successfully. Sometimes it talks but mostly it does not and vibrations work as expected. Great work. Maybe you could release this app into Playstore, some other blind people could benefit from that or make more suggestions.
Click to expand...
Click to collapse
Thanks for your feedback, i'm glad you like it.
I find myself running it from time to time, just to see if I can feel the time
I'm gonna try to publish it when I find time. I'm currently starting work at a different project.
Just came across this thread. Very interesting project!
I, myself, am not blind, but I like the direction this is going! I am going to try it out!
Have you published this to the Play store as of yet? This could be good! ??
Yeh, this is a unique app concept for many!
sorry, for not responding in almost a year.
best would be to bake this function into the os, or make it activate by gesture... wouldn't this be awesome? telling time without ears and eyes, just by a movement...
I just remembered this app and thought i might finish it and add it to play store.
HOPEfully this weekend

Categories

Resources