Related
Hello wondering if anyone can help.
Bought the device yesterday, galaxy player 5.0
The only way I can connect to the wifi is if I disable WEP and have the router open.
When I use WIFI, either from the cell phone or my home WIFI using WEP, the device is stuck in obtaining IP address, as soon as I remove the WEP and have the router open, it connects.
None of my other devices have this issue, only this one.
Any ideas?
or
Should I return it?
Thanks.
I found that if my router was broadcasting its SSID my 5 would connect, if it was hiding the SSID it would not (just sat there searching for IP). Maybe that's the problem?
Mine has problem too on my belkin54g (open config), connect and disconnection all the time pretty annoying, i really hope there will come a fix out from samsung since it came with 2.3.5 update....
Thanks!!!
Thanks guys got it working.
Changed password on the router and did a reset to it.
Seems that did the trick.
Almost returned the player.
And the worst is that I had already installed a shield for the screen, 15 bucks!!!
Anyway, thanks for the response!!!
Hidden SSID need patch for YP-G70
Just install HiddenSSID Enabler from market, it'll work for YP-G70. You need run it once and get your hidden wifi connected, then can uninstall it. Looks like it is just a patch but really works.
I was under the impression you could use a hidden SSID under stock 2.3.5. Under Wifi Settings, there is the "Add Wi-Fi network" option, and it looks like it can be used for hidden SSIDs.
apapousek said:
I was under the impression you could use a hidden SSID under stock 2.3.5. Under Wifi Settings, there is the "Add Wi-Fi network" option, and it looks like it can be used for hidden SSIDs.
Click to expand...
Click to collapse
No, it won't work coz hidden SSID not supported by GB.
Sent from my YP-G70 using xda premium
Try using WPA instead of WEP. WEP is ancient, and some newer wifi chipsets don't interoperate well with it because it's so old and it's been HIGHLY recommended to ditch it on routers for at least 5 years. WEP was known to be insecure almost a decade ago!
Sent from my GT-P7510 using Tapatalk
Someone correct me if I'm wrong but it seems like I remember reading a few years ago that hidden ssid's were not part of the 802.11 b,g, or n specifications. I thought that while a lot of devices had that function, it wasn't exactly "compliant".
Meticulus said:
Someone correct me if I'm wrong but it seems like I remember reading a few years ago that hidden ssid's were not part of the 802.11 b,g, or n specifications. I thought that while a lot of devices had that function, it wasn't exactly "compliant".
Click to expand...
Click to collapse
Yes, that's true. I haven't seen any android smartphone on GB (don't know what's in ICS) can connect hidden SSID unless apply the hidden SSID Enabler patch. However, iphone / ipod has no problem.
Sent from my YP-G70 using xda premium
I am constantly losing my connection with wifi, i got samsung galaxy player s wifi 3.6
wifi disconnect/reconnect fixed
On my 4.0 US, the wifi would disconnect and reconnect constantly. To fix it, go to ur network (on windows go to start and click network or type in ur IP address) and go to LAN settings. Change the dhcp lease time to 2 weeks or anything bit forever. It resolved my issue completely
Hi
to begin I want to applogize if this question/problem has been asaked earlier but I gave up searching the forum or the internet.
I tried diffrent roms (GalaxyTask, Overcome, Task 650 and CM9) on my p7510 but It does not find my home wifi after flashing. However, when I use Stock or CM9 it recognizes my home wifi.
Has anyone a fix for that problem?
Can you give a little more information? What type of router (make + model)? are you using 2.4ghz or 5? wifi g or n?
slack04 said:
Can you give a little more information? What type of router (make + model)? are you using 2.4ghz or 5? wifi g or n?
Click to expand...
Click to collapse
I have a D-link 635 using wifi n.
The strange thing is that the tab finds my home network under the Cyanogenmod9 rom and stock rom but not under the Overcome, starburst or galaxy tab rom. This makes me think that it is not a router problem. I could be wrong tough.
I tried to set up the wifi manually but it did not work. I also tried to delete it from auto recognition before flashing a new rom. Still it finds many other wifi networks but not my home network.
Yeah, that's pretty weird. I'd post your question in task's thread; he's pretty good about figuring this stuff out. Also, I have to point this out: "CM9" is not available yet; what you have is the CM9 preview. Kind of has to be said so as not to confuse anyone with the real thing...
Try switching from wifi n to b or g (in your router configuration). Might bring you closer to a solution.
Also, you could try different channels to sort things out.
Wifi-Analyzer is a good app to analyse and fix Wifi Problems
http://market.android.com/details?id=com.farproc.wifi.analyzer&feature=top-free#?t=W251bGwsMSwyLDIwNSwiY29tLmZhcnByb2Mud2lmaS5hbmFseXplciJd
I'm having wifi problems with my tab as well.
It worked fine with the stock rom. After I flashed task rom 10 the wifi range got realy bad. I mean bad like it only got 4 bars when standing right next to the router. In the next room, separated by a wall, it would got nothing. I did not change a thing in the router for months.
I thought it might be something related to HC 3.2 so I flashed the In Paris rom and the problem was gone. I might try another HC 3.2 rom to see if what happens but right now I'm probably going to wait for CM9 anyway.
btw my router is a asus rt-n56u
maupenabh said:
I'm having wifi problems with my tab as well.
It worked fine with the stock rom. After I flashed task rom 10 the wifi range got realy bad. I mean bad like it only got 4 bars when standing right next to the router. In the next room, separated by a wall, it would got nothing. I did not change a thing in the router for months.
I thought it might be something related to HC 3.2 so I flashed the In Paris rom and the problem was gone. I might try another HC 3.2 rom to see if what happens but right now I'm probably going to wait for CM9 anyway.
btw my router is a asus rt-n56u
Click to expand...
Click to collapse
I´m currently on Overcome 2.1.1 (for 7500 3G Tab) and have no issue´s at all.
I can fully recommend it as a 3.2 ROM
Well my problem is that it does not find my home network at all. No matter which rom I flash except for the CM9 preview. I get a whole lot of other wifi networks but not mine. This makes me think that it is something that the rom does rather my router.
Change your router's channel plz.
Every router have 1-13 channels. It will be set to auto by default. Change it from 1-13, and you can find one to use.
RealDealSaar said:
I´m currently on Overcome 2.1.1 (for 7500 3G Tab) and have no issue´s at all.
I can fully recommend it as a 3.2 ROM
Click to expand...
Click to collapse
Yeah, I heard good things about it. I skipped it because of the stock kernel, I want a kernell with OC enabled, Can I use it with pershoot kernel maybe?
Please use the Q&A Forum for questions Thanks
Moving to Q&A
zhangyi0402 said:
Change your router's channel plz.
Every router have 1-13 channels. It will be set to auto by default. Change it from 1-13, and you can find one to use.
Click to expand...
Click to collapse
Thanks that did the trick. I used a fixed channel instead of the auto setting that my router uses. Pefect now I can enjoy all the roms completly!
Tyst Tysk said:
Thanks that did the trick. I used a fixed channel instead of the auto setting that my router uses. Pefect now I can enjoy all the roms completly!
Click to expand...
Click to collapse
The last 2 channels of the router do not show up on my rooted galaxy 10.1, I had to change the router channel because of this.
My model is YP-G70 , firmware 2.3.5 on original updated stock rom.
My wifi working very well when I used with my others device (HTC Desire, Nook Color and PC) but with my awesome Samsung Player...
Every some minute the player drop the wifi line and after 1/2 second reconnect.
And i loose my download
Incredible.
I turn off Juicedefender, I 've setup the wifi property "Wifi sleep policy" with NEVER, I turn on KeepWifi Service (app) but.. NOTHING.
Do you have some advice?
Help...
I had the same issue when I bought my US model. But I only had the issue with my home wifi and not anywhere else. Can you connect at another location and see if you have the same issue? I ended up just replacing my old Belkin router and haven't had an issue since.
Sent from my YP-G70 using XDA
Try installing KeepWifi, see if that works. Otherwise it could be your router configuration, like the kind of encryption you use for your wifi password. Try to reset your router but don't use any password for a little while, if that works, use another encryption method.
Sent from my YP-G70
SirRhor said:
Try installing KeepWifi, see if that works. Otherwise it could be your router configuration, like the kind of encryption you use for your wifi password. Try to reset your router but don't use any password for a little while, if that works, use another encryption method.
Sent from my YP-G70
Click to expand...
Click to collapse
Thanks for the advice...
I will try, but tomorrow I 'll be in another "wifi area" so with another router...
Solution
I've changed the "Client Lease Time" in my dhcp server (ddrwrt) from 0 to 99999 minutes.
It's working end I don't know why
I read this solution in an old XDA item of this forum. Thanks!!!
Hi
I have the same problem with my G70. For to have the max signal in the device i need to go beside my router. I have try with other router but the problem is the same.
maybe is only the display animation in the screen? I say that because i check the quality of my signal at it tell me GOOD.
im also having this problem on my I9003.
the wifi sleep policy has a bug.
some say that your Security/password should be WPA or WPA 2, they said this happens on WPA-secured routers, i haven't confirmed it though.
the only temporary solution for this is to disconnect or turn off the wifi in your phone settings and turning it on again, then you can connect again.
Due to the ROM,i think.Because wifi on 2.2.1(mine is YP-G1) functions great
Dose G70 have a ROM of 2.2.1?If so,you can try it yourself if you like
well i found a fix for this bug, just download the latest version of WiFi fixer from the Play Store.
that's the easiest way to fix this wifi sleep bug.
Hello, I am having the same problem, but I suspect my situation is worse. I've even tried the wifi fixer app, but my 5.0 drops wifi and breaks large downloads and games that require constant connection.
Do I have a defective unit? Any advice and help would be much appreciated.
Solution! (for me at least) go into your router settings on ur PC and change the lease time to either Forever or 30 minutes ( I can't remember which one). It worked for me... good luck
Sent from my YP-G1 using XDA
I had this wifi problem with 2.3.5 it was really annoying . Even if i was a meter from the router the signal sometimes dropped to 1 line. Samsung fixed this problem with the 2.3.6 update, and now the signal is ok.
Sent from my YP-G70 using Tapatalk 2
Not the best solution, but....
I have the same problem that happens with my SGP 5, my friend's IPAD, and the Actiontec Router that Verizon supplies with their FIOS service.
I've tried every other remedy that I can find with no success.
The only solution that works for me is to assign a static IP address to the devices. It results in a very solid and stable connection in both cases.
Hope this helps someone else !!
Thank you all for the advice, but nothing seems to work, and I have no idea how to force it to upgrade the os from 2.3.5.
I don't know what to do now short of sending it to Samsung for service.
Bogard07 said:
Thank you all for the advice, but nothing seems to work, and I have no idea how to force it to upgrade the os from 2.3.5.
Click to expand...
Click to collapse
Download from samfirmware (or anywhere else) the XXKPL firmware.If you are 5.0 international, simply flash it with Odin. US users must make a new tar with just the "factoryfs.rfs" in it and flash it with Odin. That will upgrade you to 2.3.6. However, if you do that, I strongly recommend installing one of the custom kernels, so it won't be impossible to root.
Sent from my YP-G70 using XDA
So, i've had wifi issues with my galaxy player 5.0 US model ever since I got it. I thought rooting it and flashing a new kernal and custom
rom would fix it but i've still been encountering the same issues. After I connect to wifi (anywhere) It will randomly turn itself off and then back
on and reconnect, I've set up a static ip on the device and that fixes the problem, but the static ip only seems to work when I connect at my house
and my girlfriends, anywhere else I have to turn off the static ip and just deal with the wifi problem. Is there a fix I don't know about?
Well, this was a well known bug talked about during the first few months of the galaxy player. It was decided it mainly had to do with Belkin routers. One fix for some was to change the router timout. You would need router access to do so.I think it was fixed in the 2.3.6 update. If you could find a custom Rom based on 2.3.6, that might solve it.
Sent using Tapatalk
iJimaniac said:
Well, this was a well known bug talked about during the first few months of the galaxy player. It was decided it mainly had to do with Belkin routers. One fix for some was to change the router timout. You would need router access to do so.I think it was fixed in the 2.3.6 update. If you could find a custom Rom based on 2.3.6, that might solve it.
Sent using Tapatalk
Click to expand...
Click to collapse
Yes and try to re-flash the custom kernel if you use a ROM without a kernel inside (after the first installation), always by CWM; I solved this problem with 2.3.6 GB custom rom based or 2.3.6 stock ROM + custom kernel.
Me Too !!
I too had the same problem with the stock SGP 5 and my Verizon FIOS ActionTec router. It works fine with a static IP address, and without it, it would drop the connection. Changing the router timeout did not work for me. I've concluded that certain devices don't play well with each other. In my case, it was the SGP5 and Actiontec router. By the way, my girlfriend's IPAD has the same problem (and same solution) with the Actiontec router, so it's not just a problem with the SGP5.
Hello all, I have a Samsung Galaxy S3 GT-I9300 with Stock 4.1.2 unrooted and baseband version I9300DXEMB1. The problem I have is when I try to connect with my home WiFi from my room, it says Authentication Error Occurred. I have to be directly infront of the router then it'll connect and allow me to load webpages.
If I stand in front of the router and connect, It will get connected without any problems but as soon as I return back to my room or any other place that is more than 3 feet away from the router, it wouldnt load any webpages or anything that requires an Internet connection. Then when I toggle WiFi off and on again, the authentication error occurred problem will be back. It's like my phone can only connect and load webpages when it is 1cm in front of the router. Does anyone here have any suggestion on how to help me? I'm pretty sure that it is not my router's problem because my computer and Galaxy S4 in my room can connect just fine and load webpages just fine. I've tried searching the Internet for solutions but have not found anyone with the exact same problem with range/signal strength hence I started this thread.
Wifi is kernel change your kernel .
JJEgan said:
Wifi is kernel change your kernel .
Click to expand...
Click to collapse
Rooted the phone and installed Siyah kernel. Problem still persist. Any other possible fixes? Continued my search and found this thread http://forum.xda-developers.com/galaxy-s3/help/galaxy-s3-wont-connect-to-wifi-t1779535 Same problem with what OP is experiencing. (Post #10)
I once had the same problem and fixed it by deleting the .cid.info file in /data.
vpwrf said:
I once had the same problem and fixed it by deleting the .cid.info file in /data.
Click to expand...
Click to collapse
I did the exact same thing and still no improvement. Could it be a hardware issue?. I've tried rebooting router, forgetting network, turning off Wifi power safe mode in *#0011# menu but to no avail
Sent from my GT-I9505 using Tapatalk
Suggest wipe phone install stock rom and test .
If it connects to other routers/ wifi its your router a problem .
I had these kinds of problems with two stock ROMs, do not remember the exact versions, but when I upgraded the problems were gone. That was while using the exact same Yank kernel, so it doesn't seem kernel related. It is a very annoying bug though! But upgrading ROM will fix it, I know for a fact that GNA5 doesn't have this bug.
Have you tried using wifi on other places on the same phone?
Sent from my GT-I9500 using Tapatalk
Hazerm said:
Rooted the phone and installed Siyah kernel. Problem still persist. Any other possible fixes? Continued my search and found this thread http://forum.xda-developers.com/galaxy-s3/help/galaxy-s3-wont-connect-to-wifi-t1779535 Same problem with what OP is experiencing. (Post #10)
Click to expand...
Click to collapse
From that thread, someone posted a nice solution:
rpmlins said:
Since I saw that lots of people have the same problem. I like many other, I have done everything said here, and all over the web.
Here is what I did to fix my problem...
1 - Check if you have any special char on the wi-fi SSID like "!,@,',ã,á,~,ç,ã" etc...
and Remove it.
2 - On your router check if you have ip adress ranged configured like: 192.168.1.100 to 192.168.1.150, and change it to the wide range: 192.168.1.1 to 192.168.1.254
This two steps solved my problem after I have tried everything stated here and over the web
I just registered to share this and hope to help someone.
Sorry for my bad english...
Click to expand...
Click to collapse
The thread also highlighted using static IP to solve the issue.
Plus, you can try to change the router transmission channel to a lower number and see if it works.
~ RazorMC
JJEgan said:
Suggest wipe phone install stock rom and test .
If it connects to other routers/ wifi its your router a problem .
Click to expand...
Click to collapse
Thanks for the reply, hard resetted the phone back to everything stock and tried 2 different stock firmwares but still no luck. I also went to format /data and cache in stock recovery just to make sure but still same problem.
johan81 said:
I had these kinds of problems with two stock ROMs, do not remember the exact versions, but when I upgraded the problems were gone. That was while using the exact same Yank kernel, so it doesn't seem kernel related. It is a very annoying bug though! But upgrading ROM will fix it, I know for a fact that GNA5 doesn't have this bug.
Click to expand...
Click to collapse
Yeah, I'm suffering from OCD and just to make sure the bug doesn't carry over to the next ROM i flash, I formatted my phone through recovery before flashing the .tar firmware in ODIN. And I tried 2 different firmwares and still same thing. Now on MF6 stock 4.1.2 and trying to avoid stock 4.3 because of Knox bootloader.
mrao said:
Have you tried using wifi on other places on the same phone?
Sent from my GT-I9500 using Tapatalk
Click to expand...
Click to collapse
I've tried other Unsecured networks around my area. Same problem. Very sure it is not my router problem as my other phone and computer can connect just fine and even getting at least 20mbps speed. This S3 can only connect when I'm physically beside the router.
RazorMC said:
From that thread, someone posted a nice solution:
The thread also highlighted using static IP to solve the issue.
Plus, you can try to change the router transmission channel to a lower number and see if it works.
~ RazorMC
Click to expand...
Click to collapse
Thanks for suggestions, I've also tried Static IP and checked my router settings and that it doesnt have those punctuations in the SSID and also the start and end IP is pretty wide from 192.168.1.1 to 192.168.1.253 (I don't think that 1 difference from .254 could make a difference could it?) I'm really starting to believe that It's a hardware issue. I'm probably going to contact a person to diagnose the phone tomorrow. Maybe it could be a malfunction of the WiFi chips in the phone.
Hazerm said:
...
Thanks for suggestions, I've also tried Static IP and checked my router settings and that it doesnt have those punctuations in the SSID and also the start and end IP is pretty wide from 192.168.1.1 to 192.168.1.253 (I don't think that 1 difference from .254 could make a difference could it?) I'm really starting to believe that It's a hardware issue. I'm probably going to contact a person to diagnose the phone tomorrow. Maybe it could be a malfunction of the WiFi chips in the phone.
Click to expand...
Click to collapse
If there is authentication error then that means that the phone can detect the wireless network so the hardware seems ok. Did you try to change the router channel? And even try changing the transmission from a/b/g/n to "G only" or "N only".
~ RazorMC
RazorMC said:
If there is authentication error then that means that the phone can detect the wireless network so the hardware seems ok. Did you try to change the router channel? And even try changing the transmission from a/b/g/n to "G only" or "N only".
~ RazorMC
Click to expand...
Click to collapse
That's exactly what I thought too. Why can't it connect if it can detect the network? And I've since tried changing channels only for it to return to the same result, authentication error. And my router settings do not have an option to change the radio type. I can't remember exactly where but it might be Android forums or something (read too many different forums over the past few days) and this guy said that maybe it was some power management failure thing. I'm not an expert with hardware and can't provide any explanation or theory. Maybe there's some other component that manages the power to use that'll enable the phone to receive data from the router and that thing malfunctions while the main wifi chip still works that explains why I can still detect wifi networks?
[Edit]I'm also thinking that maybe because this Imaginary power management component inside the phone is malfunctioning/not receiving enough power, that's why when im in a room different from where the router is, i cannot connect because the phone isn't receiving enough power to validate the data from the radio waves and also because when Im standing beside the router then can load webpages just fine because the Signal strength is high and probably the radio waves from the router is emitting high energy so the power management component doesn't require as much energy to receive data compared to when Im in my room. Something like the router shouting and your phone needs a certain amount of energy to hear the voice from the room otherwise you cant but if you're standing beside it you can hear it no matter what. (This is just my theory and what Im thinking the problem is. It is not an explanation but just my opinion. This information could be totally wrong for all I know.)
Sent from my GT-I9505 using Tapatalk
@Hazerm, can you try WPS setup if your router supports it?
On your phone: Settings > WiFi > Menu > WPS
Rebooting the router is also recommended. Maybe you can also try changing the security on the router to WPA/WPA2
~ RazorMC
RazorMC said:
@Hazerm, can you try WPS setup if your router supports it?
On your phone: Settings > WiFi > Menu > WPS
Meanwhile, I will try to search for another solution and post it here if i can find anything.
~ RazorMC
Click to expand...
Click to collapse
Yep, WPS is supported and enabled on my router. Use it cause I was too lazy to retype my password everytime i flashed a firmware on the phone haha. And same thing. when I try to connect using WPS, the phone (in my room or any location 10cm or more away from router) doesnt react even after pushing the button on the router. But if I were to stand beside the router, WPS works without any problems.
Hazerm said:
Yep, WPS is supported and enabled on my router. Use it cause I was too lazy to retype my password everytime i flashed a firmware on the phone haha. And same thing. when I try to connect using WPS, the phone (in my room or any location 10cm or more away from router) doesnt react even after pushing the button on the router. But if I were to stand beside the router, WPS works without any problems.
Click to expand...
Click to collapse
Ok try using airplane mode when you are standing at a distance and check if the wireless connection continues.
~ RazorMC
RazorMC said:
Ok try using airplane mode when you are standing at a distance and check if the wireless connection continues.
~ RazorMC
Click to expand...
Click to collapse
No improvement, unfortunately The progress bar just crawls to the end and the phone just says WPS failed. This was approximately 1 meter away from the router, I have to be less than 1 metre from the router to get a connection. Btw, router was rebooted several times and Security has always been WPA/WPA2-PSK, not very interested in changing the security to other types like WEP. Just not very trustable
Hazerm said:
No improvement, unfortunately The progress bar just crawls to the end and the phone just says WPS failed. This was approximately 1 meter away from the router, I have to be less than 1 metre from the router to get a connection. Btw, router was rebooted several times and Security has always been WPA/WPA2-PSK, not very interested in changing the security to other types like WEP. Just not very trustable
Click to expand...
Click to collapse
I can understand that this is very frustrating for you. Believe me, I've had issues with phones and wifi
Ok, so I found 2 short threads that you could read:
Link 1
Link 2
Summary:
- try the steps in Link 1
- Change phone frequency from 2.4ghz to 5GHz (had this option in Omega ROM 4.3-based)
- 2 users report that the issue is fixed in CM9 (or even other CM roms)
- Might be a mainboard issue after all.
PS: Surprisingly, some of the people reporting the issue have used Omega rom in the past and faced the issues since then. (I didn't have any issues though so I cant blame the rom)
~ RazorMC
RazorMC said:
I can understand that this is very frustrating for you. Believe me, I've had issues with phones and wifi
Ok, so I found 2 short threads that you could read:
Link 1
Link 2
Summary:
- try the steps in Link 1
- Change phone frequency from 2.4ghz to 5GHz (had this option in Omega ROM 4.3-based)
- 2 users report that the issue is fixed in CM9 (or even other CM roms)
- Might be a mainboard issue after all.
PS: Surprisingly, some of the people reporting the issue have used Omega rom in the past and faced the issues since then. (I didn't have any issues though so I cant blame the rom)
~ RazorMC
Click to expand...
Click to collapse
Unfortunately I'm not the original owner of this S3 so I can't be sure if the previous owner flashed any custom ROMs.
Sent from my GT-I9505 using Tapatalk
Hazerm said:
Yeah, I'm suffering from OCD and just to make sure the bug doesn't carry over to the next ROM i flash, I formatted my phone through recovery before flashing the .tar firmware in ODIN. And I tried 2 different firmwares and still same thing. Now on MF6 stock 4.1.2 and trying to avoid stock 4.3 because of Knox bootloader.
Click to expand...
Click to collapse
Don't worry about Knox, it is not present in 4.3, so you can just flash GNA5 and be done with it! I do recommend Nova or Apex launcher though, way smoother!
For all the other people here, this is a known bug with certain routers that are not 100% compliant with the WiFi standard and therefor do not confirm the handshake. I have had these problems with certain ROMs as well (cannot exactly remember which ones) and after flashing another ROM (at the moment I am on GNA5) Samsung fixed it, while it is not even their issue, the issue/bug lies within the routers that pose problems.
johan81 said:
Don't worry about Knox, it is not present in 4.3, so you can just flash GNA5 and be done with it! I do recommend Nova or Apex launcher though, way smoother!
Click to expand...
Click to collapse
Really? Because with the Galaxy S4, late 4.2.2 firmwares and all 4.3 and above firmwares had new Knox bootloaders which means no turning back to old 4.2.2 ROMs and also the Knox 0x1 flag which to my knowledge is not resettable at the time of this writing.
Sent from my GT-I9505 using Tapatalk