[HELP] [QUICKLY] Bootloader question. - Sony Ericsson XPERIA X10 Mini

Are we able to crack it or is it too hard? Does the X8 and X10 Mini share the same type of bootloader?
What's the progress of cracking it?
Searching didn't come up with squat.

Help!
I too have a pressing issue with my bootloaders. I had GingerDX installed on my phone and did a factory reset with xrecovery before flashing the CWM zip with xrecovery. Ever since then, my phone has been stuck on the SE screen, I'm guessing because of a problem with its bootloader. I've tried superoneclick, that update app inside the folder structure of SE PC Companion, flashtool (plus drivers) and pressing pretty much every combination of buttons to try and get it to connect to flashtool. Flashtool always has an error trying to flash the bootloader, though, and nothing else will connect for more than a few seconds after I plug in my device.
Anybody got any ideas? I'm posting here as a last resort, had this phone so long it's turning yellow and I'm going to replace it, but I suppose it's worth one last try.

click click said:
I too have a pressing issue with my bootloaders. I had GingerDX installed on my phone and did a factory reset with xrecovery before flashing the CWM zip with xrecovery. Ever since then, my phone has been stuck on the SE screen, I'm guessing because of a problem with its bootloader. I've tried superoneclick, that update app inside the folder structure of SE PC Companion, flashtool (plus drivers) and pressing pretty much every combination of buttons to try and get it to connect to flashtool. Flashtool always has an error trying to flash the bootloader, though, and nothing else will connect for more than a few seconds after I plug in my device.
Anybody got any ideas? I'm posting here as a last resort, had this phone so long it's turning yellow and I'm going to replace it, but I suppose it's worth one last try.
Click to expand...
Click to collapse
Have you tried this way?
http://forum.xda-developers.com/showthread.php?p=12811312
Sent from my U20i using xda premium

Yes, I tried it after using ggsetup; I had already installed the semc drivers.

Related

[Q] Really bricked x10 mini-No solution

I tried installing CM7.1 last night but after i carried out all the steps and installed update.zip, the phone said something like recovery seems bad when i tried to reboot my device. It was either reboot with bad recovery or restore current recovery, i restored the first time and reinstalled CM7.1 but the same happened so i went with reboot with bad recovery and they said you might not be able to reboot into recovery, so after the reboot i got stuck on the Sony Ericsson logo, and none of the methods (SEUS, x10 flashtool, or the battery method) work. I couldn't find a solution anywhere. Is there a way i can possible reach xrecovery via my SD Card or something?
Thanks in advance.
I had mine stuck at the logo too, but I managed to flash it with flashtool by pressing the top and middle button (to reset the battery) and then press the back button to set the phone to "flash mode". It's kind of tricky but I'm sure you'll get it after a couple of tries (you should see the green light go on).
Get a stock .tft for your mini, the run flashtool. If it won't work try different versions of flashtool and also install Gordons Gate to make the drivers detect the phone.
I'm pretty sure there is no such thing as a "bricked" phone. If you can get into "flash mode" you should be able to recover the phone.
Good luck!
Thanks alot..
I tried using the old SEUS update service (i had a setup file) and it worked, my phone is now working

X10 bricked Help Please

Hi friends,
I think I have bricked my X10i B'cuz the phone is struck at the Sony Ericsson logo.
What I tried to do?
I was in tripndoid MIUI, so I wanted to upgrade the rom to black edition, so I tried to unlock the boot-loader, I had successfully downgraded the firmware and unlocked the boot-loader and also updated to custom kernel (doomloard)
After that I got in CWM recovery mode and installed the .zip file after cleaning the system cache and dalviks cache, Now the phone refuses to start nor get into flash mode.
I tried removing the battery and reinstalling the battery, but as soon as I put the battery back on the phone lights up at the Sony logo.
Even If it try to charge the phone from the electrical socket, the led of the phone does not turn on, it still gets into the Sony logo and stops there.
The phone gets recognized in the flash tool, its tells the phone is in ADB mode. I cannot put the phone on flash mode anymore.
I tried looking in various threads, but could not get a concrete answer, please help. I have limited access to internet, So i do not have PC companion to try and repair my phone. Is there any way that I can get back my phone alive.
Edit: I just plugged it in, I can get into flash mode.. Anyone please help me how can I flash back to any rom..
Did you flash the upgrade firmware after downgrading and unlocking firmware? Sometimes the Kernel doesn't support certain ROMs as well and it can't boot into the system.
The easy method of flashing the stock SE firmware is by using the X10 Flashtool. Simply download and install it (you might have to turn off anti-virus software as it's listed as a virus of some kind) and install the stock SE 2.3.3 firmware and press flash. Instructions will pop up and your phone will be as good as new. It does mean that you lose everything like ck, recovery, unlocked bootloader, etc.
You can find the Flashtool and the stock firmwares here:
http://forum.xda-developers.com/showthread.php?t=920746
EDIT: To do flashing, you will have to turn the phone off. The X10 may turn on when you reinsert the battery too soon, like you have described. Generally, you should take the battery out for about 5 seconds before reinserting it so the phone actually turns off and doesn't turn back on.
Good luck and don't forget to hit thanks if this helped in some way
@ Panzerfaust101 - I have already hit thanks
I figured it out myself.. here is how I made it through..
Problem - was in the Kernel, just out of some instinct I downloaded Doom's kernel v.006 and some how got the phone into flash mode and flashed the kernel.
After that I was able to navigate into recovery and install the new ROM, but my problem did not stop. Now the phone got struck in the new RoM's startup screen.
So again I downloaded the right version of Doom's kernel for the RoM and flashed it again. So I got the problem solved, but I realized the phone radio was not working, So I again downgraded the firmware and ran the bootunlocker and then updated the phone back to the right kernel.
Now I am able to enjoy the new ROM.
Yeah, it should be your ck. I flashed a ck before (can't remember which one), but for one reason or another, I couldn't get cwm-based recovery working, so I tried another one which couldn't boot anything up properly, so I'm back on stock 2.3.3 (was on the MIUI-based BlackHD Edition. Brilliant ROM btw) waiting for beta+ CM9 ROM for X10 to be released
Btw, for future reference, can you link me the exact Doom ck that you used? I'm probably going to install a custom ROM on mine again and I need to know one that will be guaranteed to work without a problem. Thanks
Cool, you will need Doom's kernal - X10_FXP_DooMKernel-v05a-BootManager-v1.3
Also hope you have the bootlocker unlocked, if not you need to use X10_aZuZu_Kernel_Downgrade_Generic firmware and unlock the boot loader after that you can directly upgrade the firmware to Doom's kernel and install the RoM.
Thanks to DooM and aZuZu for the files.
Kernal link
http://forum.xda-developers.com/showthread.php?t=1362392&page=90
i've your same problem...how i can plug-in in flash mode?
Try this trick!!!
Remove the battery.
Connect your phone to system with the battery still out.
Now hold the back button and put the battery on, green led will glow.
Now you are on flash mode and this would stay for not more than 5-10 secs
You should have quick fingers, so that you should select the firmware or any update within those ten sec's. Keep trying this will work... BTW its was the only way I could revive my phone.
but pc don't recognize my x10...
Shindoruk said:
but pc don't recognize my x10...
Click to expand...
Click to collapse
Are you using a flashtool or Pc Companion? Also please reinstall the adb drivers to your PC and check again.
amrth said:
Try this trick!!!
Remove the battery.
Connect your phone to system with the battery still out.
Now hold the back button and put the battery on, green led will glow.
Now you are on flash mode and this would stay for not more than 5-10 secs
You should have quick fingers, so that you should select the firmware or any update within those ten sec's. Keep trying this will work... BTW its was the only way I could revive my phone.
Click to expand...
Click to collapse
Is that the method you use to flashing? I've seen it quite a lot on these forums, but I haven't personally used it before and I've been curious as to what they did. Generally, don't you prepare to flash by pressing the flash button on Flashtool and following the instructions that pop up? i.e. disconnect and turn off phone, hold back button, reconnect phone. I've always used this method for flashing. Doesn't it work properly for some devices?
Also, if the battery's out and the flashing takes 10+ seconds, what happens? does it stay on once it's detected a device flashing the firmware?
Panzerfaust101 said:
Is that the method you use to flashing? I've seen it quite a lot on these forums, but I haven't personally used it before and I've been curious as to what they did. Generally, don't you prepare to flash by pressing the flash button on Flashtool and following the instructions that pop up? i.e. disconnect and turn off phone, hold back button, reconnect phone. I've always used this method for flashing. Doesn't it work properly for some devices?
Also, if the battery's out and the flashing takes 10+ seconds, what happens? does it stay on once it's detected a device flashing the firmware?
Click to expand...
Click to collapse
The ten seconds isnt a standard just a rough idea. Yeah the flashtool way is proper way to enter flashmode it just that the USB socket on this model isn't the best, many people had problems and basically just found their own way around it.
Sent from my X10i using XDA App
Pleeease, I need help.
My x10 enters in flash mode with the green led, but it still only 10 seconds on, after that change to SE logo and that's it...I think that it's because it ran out of battery...any solution for this!?!?
After that I can leave it connected by USB but still being with the SE logo and it doesn't seem that the battery is charging.
Even if I take off the battery, put in again and simply connect it by USB the SE logo shows again...I don't know what else to do...
This is Flash tool log:
11/035/2012 15:35:25 - INFO - Device connected in flash mode
11/035/2012 15:35:44 - INFO - Device disconnected
11/035/2012 15:35:45 - INFO - Device connected with USB debugging off
11/035/2012 15:35:45 - INFO - For 2011 devices line, be sure you are not in MTP mode
Did you flash the upgrade firmware after downgrading and unlocking firmware? Sometimes the Kernel doesn't support certain ROMs as well and it can't boot into the system.
The easy method of flashing the stock SE firmware is by using the X10 Flashtool. Simply download and install it (you might have to turn off anti-virus software as it's listed as a virus of some kind) and install the stock SE 2.3.3 firmware and press flash. Instructions will pop up and your phone will be as good as new. It does mean that you lose everything like ck, recovery, unlocked bootloader, etc.
You can find the Flashtool and the stock firmwares here:
http://forum.xda-developers.com/showthread.php?t=920746
I wish i can download the .ftf from the link that u had provided , please can any1 provide me a correct link, so i can unbrick my phone.
Panzerfaust101 said:
Is that the method you use to flashing? Doesn't it work properly for some devices?
Also, if the battery's out and the flashing takes 10+ seconds, what happens? does it stay on once it's detected a device flashing the firmware?
Click to expand...
Click to collapse
Kind of a late reply, apologies for that. Yes I followed the same method as listed. Some times your method works but not always!!!
If the battery is below 5% i believe the system will not get you into the flash mode. Since flashing hardly takes few seconds, I suppose the available battery will hold on.
BTW my trick starts only after I get into the flash tool
laneyofdeath said:
The ten seconds isnt a standard just a rough idea. Yeah the flashtool way is proper way to enter flashmode it just that the USB socket on this model isn't the best, many people had problems and basically just found their own way around it.
Click to expand...
Click to collapse
+1, I agree to this.
_CoRo_ said:
Pleeease, I need help.
My x10 enters in flash mode with the green led, but it still only 10 seconds on, after that change to SE logo and that's it...I think that it's because it ran out of battery...any solution for this!?!?
Click to expand...
Click to collapse
I don't think its cuz of a battery issue, It cuz of kernel issue. Kindly give a backdrop of what you are trying to do? Might be helpful to correlate the actions.
uglyprince said:
I wish i can download the .ftf from the link that u had provided , please can any1 provide me a correct link, so i can unbrick my phone.
Click to expand...
Click to collapse
Yes mate I tried the same tool that you have posted. Yeas I did upgrade the firmware to custom kernel and then went ahead with the installation.
Try this link : http://www.mediafire.com/?3ol6gpykaa5acwo
Thank 7hr08ik for this link. Please use the FXp kernal, not DooM.
Major update is that DooM kernel version that I had installed was completely a phone crasher, So I had to update the kernal and the RoM for a newer version.
Right now I am using FXP kernal with v3 of the blackedition HD v1.3 RoM, So far So good
Cheers
Amrth

Help with bricked x10 please

Hi would appreciate some help as i seem to of exhausted all avenues...
Was loading a new rom with xrecovery and twice it would'nt load so without any thought took out cable when it rebooted was left with just SONY ERRICSSON in white screen.
It appears no rom is on at all now and will not recognise on superoneclick, flashtool or seus!!
I've tried many times but to no avail HELP!!!
lounger64 said:
Hi would appreciate some help as i seem to of exhausted all avenues...
Was loading a new rom with xrecovery and twice it would'nt load so without any thought took out cable when it rebooted was left with just SONY ERRICSSON in white screen.
It appears no rom is on at all now and will not recognise on superoneclick, flashtool or seus!!
I've tried many times but to no avail HELP!!!
Click to expand...
Click to collapse
Can you still access xrecovery at all?
If not, what can you when you try to flash something via flashtool?
Did you try PC Companion instead?
Flash the stock SE firmware (I would recommend the 2.3.3 one to save yourself trouble) from Flashtool. If that doesn't work, you're pretty much screwed.
DL firmware from here : http://forum.xda-developers.com/showthread.php?t=920746
Best option is given by Panzerfaust101
Another option is as follows:
Remove the battery.
Connect your phone to system with the battery still out.
Now hold the back button and put the battery on, green led will glow.
Now you are on flash mode and this would stay for not more than 10 secs, install the latest firmware and then try accessing Xrecovery.
Its should do the trick!!

[Q] Phone bricked, flashtool not working with phone.

I'm running cobrato's miui rom with his modified version of doomlord's fully over clocked kernel.
The problem is, when I hold down the power button to turn it on, nothing happens. The same thing if I pug it into a charger or my computer. I can get it into flash mode and I tried flashing a new kernel but when it flashes the loader it gets stuck at 13%. I also tried flashing stock 2.3 firmware but again, flashtool can't flash the loader.
letterman12 said:
I'm running cobrato's miui rom with his modified version of doomlord's fully over clocked kernel.
The problem is, when I hold down the power button to turn it on, nothing happens. The same thing if I pug it into a charger or my computer. I can get it into flash mode and I tried flashing a new kernel but when it flashes the loader it gets stuck at 13%. I also tried flashing stock 2.3 firmware but again, flashtool can't flash the loader.
Click to expand...
Click to collapse
did you try restore from PC companion or SEUS?
^ true that
Try using SEUS to repair your phone, sometimes when everything else seems to fail, surprisingly the one thing we've always ignored, actually works !!
I did try that. It keeps saying, "There's no new software for your phone. Please try again later."
Hi, so your phone coulb be save...
You may need to reinstall the stock rom and start your config again...
In PC Compagnion (I think SEUS doesn't work again)
Go to SUPPORT ZONE / UPDATE PHONE / REPAIR PHONE...(I'm not sure it's exactly the same words because it's in french language for me..)
I hope it solved your problem or someonelse idea, because no news...
Sent from my X10 using XDA

is this what they call bricked phone?

So I've got a Xperia X10 mini pro. It had a CM7.2 on it and some nAa kernel. I've downloded another rom and flash it. Everything ok.
When I wanted to reboot the phone after the flashing, CWM said something about some CWM error or something like that. I've ignored it and now the phone gets stuck at the booting process.(powers up, sony ericsson logo apears and nothing happens). If I put the battery in, it sometimes powers up by himself. I can't get in flashmode(back key, menu key...none of them works). Windows recognises something like SEMC bla bla.. I already have a rooted, flashed Xperia Neo so I'm not exacly a noobie, but I'm a noobie at x10.
So, any thoughts? Thanx alot!
slvjpn said:
So I've got a Xperia X10 mini pro. It had a CM7.2 on it and some nAa kernel. I've downloded another rom and flash it. Everything ok.
When I wanted to reboot the phone after the flashing, CWM said something about some CWM error or something like that. I've ignored it and now the phone gets stuck at the booting process.(powers up, sony ericsson logo apears and nothing happens). If I put the battery in, it sometimes powers up by himself. I can't get in flashmode(back key, menu key...none of them works). Windows recognises something like SEMC bla bla.. I already have a rooted, flashed Xperia Neo so I'm not exacly a noobie, but I'm a noobie at x10.
So, any thoughts? Thanx alot!
Click to expand...
Click to collapse
You need to flash the kernel appropriate to the ROM.
You are on Stock kernel, and not some nAa one, so your last ROM had CWM (or xrecovery) included. This is not included in ROMS that run on nAa kernel because the nAa kernel has got it built-in. That's why it disappeared when you installed a new ROM, now find the kernel that belongs to it.
I can't flash any kernel, any rom or anything because the phone can't get connected to PC, no flashmode, no nothing. The led isn't blinking or anything not even when I connect the charger.
slvjpn said:
I can't flash any kernel, any rom or anything because the phone can't get connected to PC, no flashmode, no nothing. The led isn't blinking or anything not even when I connect the charger.
Click to expand...
Click to collapse
If you take out the battery it works sometimes you say, so take out your battery, f it powers up and gets stuck on the SE Logo, connect it to your pc, press power and home buttons together to get a hard reboot, as soon as the screen goes black, press the back-button to get into flashmode. ofcourse make sure your software is asking for flashmode before you do all that.
what I mean by powering up by himself is that it acts like I'm powering it up but it still get's stuck at se logo. I'll try the hard reboot thingie.
PLEASE try this.
remove your battery.
use flashtool to flash the 2.1 firmware of SE. or use SEUS.
connect your phone to the PC and be ready for flash mode.
hold the back button.
then insert the battery while holding the back button.
it will go to flashmode.
then start flashing the firmware.
afterwards you will be reverted to 2.1 eclair.
connect to usb debug
then root your phone using flashtool.
unlock the bootloader using s1tool.
flash the nAa kernel using flashtool.
put the zipROM on your SDcard.
enter the cwm recovery.
wipe data/cache/dalvik cache then flash the rom.
if you encounter an error on flashing the rom e.g(you experience flashing in just a very short time, then the rom is not flashed) format your SDcard then redo the flashing.
I hope this helps.
PS. on some cases, when your phone is bricked. you can directly flash the nAa kernel then flash the rom.
---------- Post added at 09:00 AM ---------- Previous post was at 08:57 AM ----------
How old is your X10minipro? I'm asking this because of your LED notif lights are not working. you maybe need to read this thread. http://forum.xda-developers.com/showthread.php?t=1935124
I after some research I supose I've deleted the recovery( xrecovery area). For those who say to press any combination of keys it doesn't work.
I got the phone in service, they said it needs flash but the gay phone wont comunicate with the pc so they didn't promise anything. I will return with news.
slvjpn said:
I after some research I supose I've deleted the recovery( xrecovery area). For those who say to press any combination of keys it doesn't work.
I got the phone in service, they said it needs flash but the gay phone wont comunicate with the pc so they didn't promise anything. I will return with news.
Click to expand...
Click to collapse
Yes, I told you that you removed xrecovery, because it was included in the ROM that used your stock kernel. You then flashed a ROM that needs a custom kernel, and it is included in the kernel then, so not in the ROM anymore. That's why you lost it. but that has nothing to do with flashmode however
thats the reason I've got it to service. Something wrong with hardware or boot area preventing the phone getting into flashmode( I suppose)...
Thanks
thanks for the thread now I able to do more than just rooting more save
The X10 mini is up and running. He had recovery and not a CWM(as I have now).
The problems was with the USB port, and it still is but I/ve managed to get it connected with Flashtool after removing and putting back the battery while holding he back key .
After 2 service shops and 2 weeks of waiting they both said to me "There is a comunication problem with the phone. Sorry!"
So, if anyone has problems like mine, they should get their usb port changed(5-10Euros) or try for as much as they need to get the phone connected( I tryied for almost 1 hour to get the green led and another half hour to get a stable connection as it whould get in flashmode but not being recognized in flashtools PS: changing the position of the data cable by standing up or down/more to the left or more to the right helps ).
Thank you all for the feedbacks!!

Categories

Resources