I have currently installed RUU_Le2_UK_1.72.206.3_Radio_15.32.50.07U_2.07.51.22_2_Signed_LEO_Ship
everything works fine.
i have tried Dutty CDLC version 14 which worked fine but due to the messaging client being not compatible with smartwatchM i had to go back to stockrom
i previously HSPL so i could install custom radio (to make android work)
after going back to the stock rom i have since tried various other roms and i have the same problem each time
it installs and boots fine, after a restart it just seems to hang at first screen (does not display radio rom etc in bottom corner like normal just screen)
only way to get anything to work again is to once again install the stock rom via bootloader screen.
is the HSPL damaged? or have i missed something
thank you for you help
you are flashing 576 ram enabled roms, but your radio is still a 51 version so they won't boot.
enter bootloader, flash something like 2.08.50.x radio and your phone will boot. don't forget every time you flash back to that o2 rom it will reset the radio to a 51 version.
that makes so much sense, im just an idiot.
i shall attempt this now. thanks alot
easy to overlook.
it worked ... altho i have to go back due to me not being able to find a new rom that works with my mbw150 lol , 2 days just to revert back
anyways im very happy for the quick reply and help and not mocking me for being dumb. thanx again
Ok, I have a Motorola atrix AT&T, but live in Australia i wanted an unbranded one, but apparently there's no such thing.
I unlocked my bootloader and flashed cm7 then once i had my fill of it i tried flashing gingerblur, which resulted in softbricking my handset a number of times. So after all that playing around i used sbf to flash back the standard moroblur 2.3.4 4.5.91 gingerbread rom.
Today when i had all screen animations on after factory resetting it to see if there would be any change in the ram (total 817/ free 317), i noticed that i still have the screen off animation! is this normal? Or is it that there are still remnants of the previous rom still on my phone?
Im currently reading up on how to wipe everything and wanting to know if its possible to do all this then install the standard rom??
Thanks for all your replies in advance.
The stock ROM 2.3.4 came with those animations...
I piss excellence
thanks, I didn't know t screen off crt was available. Pity there nit further controls to just use that without all the other animations.
I bought a Rezound on ebay, pre-rooted/unlocked with the leaked ICS / Sense 3.6 ROM (besides that, pretty much bone-stock)
I decided I wanted to try out a different ROM and make sure I am familiar with the process before I try to do the S-OFF process....
Well, I found that the first thing I needed to do to upgrade to (insert ICS/Sense 4 Rom here) was to upgrade to the newest Firmware (3.11.605.22), and I am currently on 3.11.605.01 ... I followed their instructions closely to update the firmware ( re-lock , load new FW as PH98IMG.zip , flash it , unlock, etc)
Well, that didn't work for me, when I got to loading up hboot and it automatically updating the FW, it didn't do what the instructions said it would, it showed a dark blue bar near the top/right, waited for that to complete, then same thing but yellow, that completed and asked to reboot, but would only reboot to fastboot...
eventually I unlocked it again and it allowed me to return to my ROM (normal ICS/sense 3.6)
Sorry about this short story... lol ^
Basically I cannot for the life of me install any rom with success... I can't even restore the nandroid I made last night (before any of this) with success..
the CLOSEST thing to success I got was installing newts One XxX sense 4 rom, it booted, and will sit on the lock screen just fine, but when I try to unlock and go to settings to turn off animations (like instructed) it will freeze and reboot....
DO I need to install the newest FW???
OR what do I need to dooo?
Pls help! I am fairly familiar with android, as I had a D Inc before this, evervolv ICS etc etc....
Thanks alot anyone !
x70xchallengerx said:
I bought a Rezound on ebay, pre-rooted/unlocked with the leaked ICS / Sense 3.6 ROM (besides that, pretty much bone-stock)
I decided I wanted to try out a different ROM and make sure I am familiar with the process before I try to do the S-OFF process....
Well, I found that the first thing I needed to do to upgrade to (insert ICS/Sense 4 Rom here) was to upgrade to the newest Firmware (3.11.605.22), and I am currently on 3.11.605.01 ... I followed their instructions closely to update the firmware ( re-lock , load new FW as PH98IMG.zip , flash it , unlock, etc)
Well, that didn't work for me, when I got to loading up hboot and it automatically updating the FW, it didn't do what the instructions said it would, it showed a dark blue bar near the top/right, waited for that to complete, then same thing but yellow, that completed and asked to reboot, but would only reboot to fastboot...
eventually I unlocked it again and it allowed me to return to my ROM (normal ICS/sense 3.6)
Sorry about this short story... lol ^
Basically I cannot for the life of me install any rom with success... I can't even restore the nandroid I made last night (before any of this) with success..
the CLOSEST thing to success I got was installing newts One XxX sense 4 rom, it booted, and will sit on the lock screen just fine, but when I try to unlock and go to settings to turn off animations (like instructed) it will freeze and reboot....
DO I need to install the newest FW???
OR what do I need to dooo?
Pls help! I am fairly familiar with android, as I had a D Inc before this, evervolv ICS etc etc....
Thanks alot anyone !
Click to expand...
Click to collapse
If you want to go back to a GB rom you need to reflash the boot image that came with it. If you want a sense 4.0 to work you need to flash the old firmware patch. For the patch I have attached it. Flash it via recovery and your rebooting on a sense 4.0 rom/ new firmware rom should be gone. (don't forget to follow the OP for Newts rom about disabling animations btw) for the boot images look to the op of the rom you are running.
cstrife999 said:
If you want to go back to a GB rom you need to reflash the boot image that came with it. If you want a sense 4.0 to work you need to flash the old firmware patch. For the patch I have attached it. Flash it via recovery and your rebooting on a sense 4.0 rom/ new firmware rom should be gone. (don't forget to follow the OP for Newts rom about disabling animations btw) for the boot images look to the op of the rom you are running.
Click to expand...
Click to collapse
Ok thanks for the reply, I did install the "old firmware patch" included with Newts XxX Sense 4 ROM, and I can successfully get the ROM to boot, it doesn't operate very well, and only for a few minutes because it will freeze and reboot. It doesn't allow me to get to the settings, no matter how fast I try to get there, it ALWAYS freezes before I can access the setting :/ ...
x70xchallengerx said:
Ok thanks for the reply, I did install the "old firmware patch" included with Newts XxX Sense 4 ROM, and I can successfully get the ROM to boot, it doesn't operate very well, and only for a few minutes because it will freeze and reboot. It doesn't allow me to get to the settings, no matter how fast I try to get there, it ALWAYS freezes before I can access the setting :/ ...
Click to expand...
Click to collapse
Hmm.. wow I'm lost. I had the same issues before I installed the patch, but after I didn't and it went fine. I'm going to have to think about this one for awhile.
cstrife999 said:
Hmm.. wow I'm lost. I had the same issues before I installed the patch, but after I didn't and it went fine. I'm going to have to think about this one for awhile.
Click to expand...
Click to collapse
Okay after flashing the ^above^ patch, the rom seems to work now, it didn't freeze so I was able to turn off animations and now it works might fine
Do you know by chance any good kernels for an ICS/Sense 4 ROM?
the stock one was draining faster than it was charging (while plugged in lol)
So I tried out the 1.836 OC kernel and it seems to be working fine, but I am interested more in battery life than performance right now, coming from the DInc, this phone is buttery smooth and doesn't REALLY need OC just yet (for me anyway)
Thanks for the help by the way!
Simple guide would be nice.
Upgraded to ICS today, the bottom right button doesnt bring up settings, it brings up a bar at the top which I don't like and can't change, the slider from lock screen changed to a camera when i often used it to turn silent on/off
it updated my facebook to the new slower/clunkier version
the text messaging is differnent
etc etc
I do no like this update and would like to revert to Gingerbread, has anyone done it and how do i do it?
I'm a noob too.
Download the. 75 firmware, install flashtool, flash the firmware and make sure you wipe your data for a clean install.
Sent from my LT26i using Tapatalk 2
link for ROM : http://www.xdafileserver.nl/index.php?dir=Sony+(Ericsson)/SE+Xperia+S+(LT26i)/STOCK+ROMS/GB
Hello everyone,
Running the stock image (Android 4.1.2). However the device has been rooted and TWRP has been installed for custom recovery. Here is the issue: The clock on the lock screen t is not in sync with the system clock. It shows the time the last time the phone was used/locked. And there is no way to delete the lock screen clock. I switched to Swipe unlock and deleted all the lock screen shortcuts as well. No change in behavior. My wife claims that this problem started after I rooted and installed custom recovery. I can't for the life of me figure out how this would be possible. How could the lock screen clock in the original ROM be affected by obtaining root and installed TWRP?
BTW the reason I rooted and installed TWRP was because I wanted the updated Android version, so I went with CM11 M10 ( I think). Everything was great except she couldn't make phone calls, send or receive messages etc. :laugh: Since I made a full backup of the original ROM using TWRP, I simply restored it to bring it back to what she had prior to CM11.
Any thoughts on whats going on? If others are running the stock ROM (4.1.2), do you have same issues with the clock on the lock screen?
Thanks