Related
Could I have bricked my tablet? Or could there be a way to recover?
As for what it's current state is; (I am sure is is stuck in the reboot loop) When powering on the tablet, it displays "Android", goes dark, and repeats. Though this is a change from when I was trying to fix it on my own. Before it looping, it would show the "Android" screen and just sit there.
No comes what I think the REAL issue is... Running 'ClockworkMod v2.5.1.1-bekit-0.8', I am unable to mount an external SDcard or mount the USB Storage(text in menu implies to me it is the USB cable to computer).
So other than the images already on the tablet, I seem to be unable to get a new image into it. And of course the images on it don't do any good.
Tech1381 said:
Could I have bricked my tablet? Or could there be a way to recover?
As for what it's current state is; (I am sure is is stuck in the reboot loop) When powering on the tablet, it displays "Android", goes dark, and repeats. Though this is a change from when I was trying to fix it on my own. Before it looping, it would show the "Android" screen and just sit there.
No comes what I think the REAL issue is... Running 'ClockworkMod v2.5.1.1-bekit-0.8', I am unable to mount an external SDcard or mount the USB Storage(text in menu implies to me it is the USB cable to computer).
So other than the images already on the tablet, I seem to be unable to get a new image into it. And of course the images on it don't do any good.
Click to expand...
Click to collapse
Most definitely not bricked. I've recovered from a much worse situation (bootloader wouldn't even budge - couldn't boot into recovery or regular at all).
Since you are able to boot into recovery, there's probably a way to get things working without resorting to nvflash (we'll get to that in a second - nvflash is the failsafe mechanism, and you should be able to re-nvflash your tablet back to its original state if all else fails).
Here's roughly what I'd try in order:
Option 1) Figure out why you are unable to mount as USB in recovery. I've actually never heard of this problem. Are you using the right cable - i.e. a working USB-to-mini-USB cable (I don't think this works at all with the full sized USB port under the latch cover). Have you tried it with another computer - perhaps there's a driver issue on your PC?
Option 2) If for some reason you really aren't able to get USB mounting working in recovery (I'm skeptical - again, I've never heard of that problem - unless you really did flash a bum recovery image or something - but seems unlikely), then I'd see if you can get ADB working properly when you are in recovery mode. Search around and read about setting up ADB if you haven't already - just a matter of getting the right driver installed on your PC and installing the binary stuff (either from the full Android SDK or one of the packages that just has the ADB stuff floating around). Search the forums, you'll find some references to help you get this working and download the right stuff.
If ADB works, you can always use "adb push filetoflash.zip /sdcard/filetoflash.zip" to put a new file on your internal SD card area and flash it.
Option 3) You can always use nvflash. I'm not going to write up a tutorial on it here - search the forums for nvflash, there are several HOWTOs. Look for the stuff Roebeet posted. You'll need to install the APX driver on your PC first before this will work, and Roebeet's posts don't explain how to install it on Windows, so you'll need to search separately for that. I have gotten this to work before, but it's a pain and I only recommend it if your recovery image is truly trashed or your bootloader is malfunctioning as mine was. In other words, don't bother until you've exhausted the first two options.
So in short - you are in a pain-in-the-ass situation, but you have by no means bricked your tablet - it is very, very far from bricked. Give us more info on *exactly* what happens when you try to "mount as USB" while you have your mini USB cable plugged into the G Tablet - do you see a drive appear on your PC? Are you running a Windows box? Mac? Linux? Have you verified that a USB keychain drive works fine with your PC but the G Tablet won't mount? Basically we need some more info to guide you in your search.
Ok finally had some free time from cleaning/packing and house hunting to try fixing the tablet.
Good news is that I was able to mount the USB. I didn't notice the cat nibble on my cable... So once I dug a spare out, I was able to copy a TnT-Lite image (still had on computer) onto it right quick. Restarted and it installed the image.
So now it has TnT-Lite, though it is weirdly stuck on the setup wizard. It tells me to touch the android to continue and shows an animation of a hand touching the android. But when I touch the android, it turns white and thats it. Also I can change the language to UK or American English. Plus when I press the menu button, I can go to wireless settings, as in cell phone wireless settings. Lastly, I can make an emergency call. So new worthless image. YEY!
I next tried to reboot back into ClockworkMod to see what I could possibly do to get by the lack of continuation in the TnT. But the image install did something interesting. When trying to enter Clockwork Mod, here is what it does from powerup: Displays "Detect a recovery key pressed" then on the next line "Booting recovery kernel image", blanks the screen and then displays "Android" for a few seconds, lastly switching to an exclamation mark in a triangle and rebooting.
So how do I go about screwing it up more?
Tech1381 said:
I next tried to reboot back into ClockworkMod to see what I could possibly do to get by the lack of continuation in the TnT. But the image install did something interesting. When trying to enter Clockwork Mod, here is what it does from powerup: Displays "Detect a recovery key pressed" then on the next line "Booting recovery kernel image", blanks the screen and then displays "Android" for a few seconds, lastly switching to an exclamation mark in a triangle and rebooting.
)
Click to expand...
Click to collapse
CWM is not installed
flash the latest firmware using stock recovery
read read read
http://forum.xda-developers.com/showthread.php?t=892090
It almost sounds like you now have stock recovery in your Gtab.
If that's the case, then maybe copy a stock TNT update.zip onto the external Sdcard, and create recovery/command file on there with the string for SDCARD2, then reboot w power and volume+. If you do have stock recovery, that should flash it back to stick TNT. Try Stock TNT 3452, since that'll also flash a stock recovery for sure.
Jim
Looks like Brian and I crossposted each other .
For the recovery/command file on the external SDCARD, put the following text in it:
--update_package=SDCARD2:/update.zip
NOTE THE 2 DASHES AT BEGINNING OF THE LINE...
Jim
No really, I've Bricked It
So, G Tablet arrived about 5 hours ago. I got it rooted and tried to install CMod 8.1. Things went wrong but I'm not sure what. Anyway, the last thing that I did was to boot in Recovery and then I selected, Format System. Now, when the tablet is turned on, in the top right corner, I have a tiny red message, Magic Value Mismatch. I get this message whether the SD card is installed or not.
I know this information is a little vague but as a Nod, it's all that I have.
f3justusc said:
So, G Tablet arrived about 5 hours ago. I got it rooted and tried to install CMod 8.1. Things went wrong but I'm not sure what. Anyway, the last thing that I did was to boot in Recovery and then I selected, Format System. Now, when the tablet is turned on, in the top right corner, I have a tiny red message, Magic Value Mismatch. I get this message whether the SD card is installed or not.
I know this information is a little vague but as a Nod, it's all that I have.
Click to expand...
Click to collapse
I'm freaking out, I think I bricked it...
I'm only getting the black android screen, I can't seem to mount USB, suggestions?
Ive been stuck right where you are a few times, not to big of a deal, just NVFlash back and start over. I am assuming you are getting the black screen you mention is the APX mode one you get by starting your tab by pressing vol down and power at the same time.
I followed this guide http://forum.xda-developers.com/showthread.php?t=861950 (Roebeet's post) which brought me back to stock.
However, when I apply the 1.1-3588 the tablet shuts off and is unable to be turned back on. The only way to turn it back on is to run the nvflash_gtablet batch file. At which point a receive a notice saying 'The update to version 1.1-3588' was not successful. Please try again or contact customer support.'
Why is the tablet unresponsive after the failed update? Why must I NVFlash to reactivate the screen?
I searched through the forums for the past hour and although I found similar problems I have yet to run into my exact one. I am hoping to find some help.
Edit*
I have the same problem as another user which can be found here http://forum.xda-developers.com/showthread.php?t=903684
I can NVFlash the stock image (or even the NVFlash of TnT-lite 1.02) and the tablet will boot after the flash and function. Power it off (or do something that requires a reboot) and the tablet will no longer function. No power on (that I can tell), can't boot to recovery......and if I plug the tablet in to the PC I can NVFlash it and it boots. It's like it's stuck in APX mode now. I just have to plug it in to the PC, no Power + Volume- combo.....just plug the USB in and run NVFlash. It boots (to whatever I flashed) and will run until I power it off or try to reboot.
Getting APX mode to function is not a problem......so I can NVFlash it but what I've tried so far has not worked (it doesn't delete the data partition, etc..as I reflash and it's right where it was before I turned it off).
Click to expand...
Click to collapse
The fix posted by acidburn89 was unsuccessful for me
Citi,
I'm not sure exactly what you are doing, but if you are getting the message
you described, that sounds more like you are booting in recovery or a regular
boot and not APX (Power/Volume - to be the white, the black APX NVFlash screen).
My suggestion is to do the stock recovery NVFlash Procedure again. Check
everything step by step to make sure the right files are there and the right
things done.
See if you can complete that and get back to a working bekit 1105 (Stock
Version 2638).
If you can do that, go into Settings/Display and set it so the display does not
turn off).
THEN, if it offers you the OTA Update, let it run.
If it is unsuccessful again, post back here and I will see if I can find the file
and instructions to load 3588 manually.
Hope this helps,
Rev
Ok so I reread Roebeets NVFlash post and double checked my files. All of them are there and in the correct location. I set up my USB drivers, booted into APX mode and ran the nvflash_gtablet.bat
Then the tablet loads properly into the stock TNT 2638. After setting up my WiFi I get a notification that the 3588 update is available. I download the update and after it ask me if I would like to apply now or later. I have tried both options however both seem to fail.
At this point if I hit apply now it shuts down the tablet however it does not turn on. The only way to turn it on is using nvflash_gtablet.bat file. Which it then boots up properly (and it is not wiped, it's as if it is jut turning on normally)and I either get one of two errors.
'The update to version 1.1-3588' was not successful. Please try again or contact customer support.'
or
'The update process cannot proceed due to an unrecoverable error. More information about the error is below, 'Verify checksum: file was not found. Downloaded file does not exist.null'
Hope this helps, I am not new to rooting/flashing roms but this is a completely new error to me.
Citi,
Did you do what I said about setting the display not to go off?
I tell people to do that because I have heard that it can
interrupt the download.
Whatever is happening, it seems like the download is not happening
or not finishing.
You can go to the Developer Forum (or there may be one in General)
and find the thread that tells where to download the .zip version of
the OTA 3588 download.
Then go down to end of the top 4349 thread in General and I wrote a post there for a
guy on how to install an update from the .zip file.
Rev
Yup I set the display to never turn off. However, it seems as if I have this problem http://forum.xda-developers.com/showthread.php?t=999832
I am currently working on this method
Edit* Well I figured out the exact problem however the link I posted was unable to solve it
Another thread on my problem, and the fix found to work for others has not worked for me,
http://forum.xda-developers.com/showthread.php?t=903684
Just bumping this as it is still relevant and it seems to be a unique issue, as all past solutions have yet to fix this problem. I spent the whole day on IRC and have seemed to stump a few people. Looks like I may have the first fully bricked tablet
Have you tried re-partitioning?
Can't get into CWM to do so, stuck in an infinite APX mode and I can only turn the power on via an NVFlash
Citi said:
Can't get into CWM to do so, stuck in an infinite APX mode and I can only turn the power on via an NVFlash
Click to expand...
Click to collapse
get the recovery.img from from cwm .8 zip file and then use nvFlash to load that.
nvflash --bl bootloader.bin --download 9 recovery.img
(make sure you put the recovery.img in you nvFlash folder and then issue the command above. That will install cwm .8)
from what you wrote above it seems like you are getting stuck in apx mode when you reboot. So my question is what files did you download to setup your nvFlash????
I will attempt to load CWM using NVFlash, and I followed this guide EXACTLY http://forum.xda-developers.com/showthread.php?t=861950 for NVFlash for windows
Citi said:
I will attempt to load CWM using NVFlash, and I followed this guide EXACTLY http://forum.xda-developers.com/showthread.php?t=861950 for NVFlash for windows
Click to expand...
Click to collapse
which files did you download from his dropbox????? I am more interested in knowing if you used nvflash_gtablet_2010110500.zip or nvflash_gtablet_46_2010112600.zip????
I initially used that nvflash_gtablet_2010110500.zip and had the same problem as you few weeks ago. So I tried using nvflash_gtablet_46_2010112600.zip and that worked a lot better for me .
hope that helps...let me know if you stuck anywhere.
enjoy
Unfortunately I tried out both with the same result
So the problem has changed from not being able to load an update to being in an APX loop? If I understand your original post correctly you were indeed able to nvflash back to original stock and boot normally. Then it failed when you tried to do the update to 3588. If you can still do that...
1) nvflash to bekit's 1105 stock
2) do not install the update
3) clear cache and data with Method I from: http://forum.xda-developers.com/showthread.php?t=1030915 - If this fails due to not being able to enter recovery then your nvflash was no good. You'll need to verify that you have the correct drivers installed, you're using the correct version of nvflash and that your image is sound. Easiest way to do that is to download them again.
4) install ClockworkMod .8 using MicroSD card method.
5) Re-partition 2048 and 0
Were there any error messages in the output of your latest nvflash attempts?
I posted on how you can get cwm .8 installed on your tablet if you are stuck in apx mode. There are also other threads that are pinned under the development section that explain how you can get cwm .8 using nvFlash. You will need that to get out of the apx loop that you are stuck in.
The problem is found here http://forum.xda-developers.com/showthread.php?t=903684
I can NVFlash the stock image (or even the NVFlash of TnT-lite 1.02) and the tablet will boot after the flash and function. Power it off (or do something that requires a reboot) and the tablet will no longer function. No power on (that I can tell), can't boot to recovery......and if I plug the tablet in to the PC I can NVFlash it and it boots. It's like it's stuck in APX mode now. I just have to plug it in to the PC, no Power + Volume- combo.....just plug the USB in and run NVFlash. It boots (to whatever I flashed) and will run until I power it off or try to reboot.
Getting APX mode to function is not a problem......so I can NVFlash it but what I've tried so far has not worked (it doesn't delete the data partition, etc..as I reflash and it's right where it was before I turned it off).
Click to expand...
Click to collapse
And I attempted to install CWM using the NVFlash method with no success. It seemed to install however when I booted the system back up (using the batch file) I saw the "Android" screen and then the tablet went black, no green CWM menu appeared or anything
rbansal2 said:
I posted on how you can get cwm .8 installed on your tablet if you are stuck in apx mode. There are also other threads that are pinned under the development section that explain how you can get cwm .8 using nvFlash. You will need that to get out of the apx loop that you are stuck in.
Click to expand...
Click to collapse
Citi said:
The problem is found here http://forum.xda-developers.com/showthread.php?t=903684
And I attempted to install CWM using the NVFlash method with no success. It seemed to install however when I booted the system back up (using the batch file) I saw the "Android" screen and then the tablet went black, no green CWM menu appeared or anything
Click to expand...
Click to collapse
If the screen is blank then connect it to your computer and see if your tablet is in APX mode. You will probably hear the usb connect sound and you can go in device manager to see if it is connected. Let me know and then we can go from there
Yes it has been in a permanent APX mode since my original NVFlash, with the only way to turn the tablet on is to use the nvflash_gtablet.bat file. This will bring the tablet to TnT however my data has not wiped since my original NVFlash and the Wifi and other information is still present. It prompts me to download the new update however there is no need since once the tablet shuts down it will go to APX mode, with a rinse repeat of the cycle and I use .bat file to turn the tablet on.
ok try this...not sure if it will work but its worth a try
1. replace part9.img with the recovery.img ( i m sure u have done this already. this is so cwm .8 gets installed when you do a full nvFlash)
2. when you boot on for the first time.. press the power & + so you go in cwm .8.
let me know if you access cwm .8 if you do this ....we'll move forward from there
Failed first time I did it, but I just tried again and what do you know...success, unsure why.
Currently sitting in CWM looking at that beautiful green screen. I am in the IRC room if we could continue there that would probably work better and faster.
ya i m still at work and cant get on irc here :/...but if you are in cwm .8 then first thing i would do is wipe data then clear cache and then clear dalvik...then go under mounts menu and mount all the partiontions and then format all the partitions...once you are done with that i would mount your tablet so you can see is as a mass storage device on your computer and upload stock frimware 3588 on there...
use this link http://forum.xda-developers.com/showthread.php?t=861950 and go down to post nvflash and get the 3588.zip
from the 3588.zip get the update.zip and copy that to your tablet...once u have that go to the main menu of cwm .8 and choose the option to install update.zip form sdcard...i thikn thats the second one down
try that and see if it works...if not then i'll on irc in the evening today and i'll help you out ...dont stress we'll get your tablet up and running again
Good morning all! Got a brand new Viewsonic G Tablet and was trying to follow these instructions for a rom (http://forum.xda-developers.com/showthread.php?t=865245) but I am having a problem. During Part One Step 4, it get stuck displaying "Detect a recovery key pressed" and some other text and doesn't install or go into a boot screen.
Any help would be appreciated.
Good evening. Congratulations on getting the G tab. Need a little more info from you. Is your new G tab running 3028 or 4349? 3028=BL1.1 and 4349=BL1.2. Let's assume 4349. With the G tab powered on and USB cable connected to the computer, did you copy BL1.2's update.zip to the root of the internal SD card?
You can use nvflash to install CWM, which is how I do it now. Extract the "recovery.img" file and copy it to your nvflash folder. Either run or create a batch file with the following:
nvflash.exe --bl bootloader.bin --download 9 recovery.img
This'll be a quick process. Once done, you should be able to power off the tablet and power it back on (holding the Volume Up button) to get into recovery.
Hopefully some of this will help.
I tried to do this and it appeared to work but my gtab will still not boot to CWM or anything. I can get it to go into the APX mode but nothing else. Any help would be appreciated.
Go to goodintentions' site and follow the directions specific to your problem:
viewsonic-gtablet-for-dummies.webs.com
First, thanks for all the amazing information on this site, it's an awesome resource to have.
I've been searching around for quite a while now trying to figure out how to get my gtablet working again and have hit a wall. Right now I can get into APX mode, but not CWM. First I tried restoring with nvflash following this thread:
http://forum.xda-developers.com/showthread.php?t=861950
Everything seems to work, but then I get stuck in a loop at the tapntap screen (It shows tapntap, then n, then tapntap, then n, etc). Next I tried to setup CWM with nvflash using this guide (other tapntap loop problems lead me to try this):
http://forum.xda-developers.com/showthread.php?t=1030042
But I have not been able to boot into CMW. The gtablet always goes back into APX mode. At the moment, it will boot into APX mode, and show the "NVIDIA USB Boot-recovery driver for Mobile devices" in device manager, even when I only press the power button (and don't hold down volume -). Holding Volume + while turning it on also goes into APX mode. Everything I have tried just leads to APX mode, except trying to restore with nvflash, which leads to tapntap loop.
All of the similar problems I have found where solved with these steps, so now I'm not sure what else to try. I've also tried to restore from an external SD card, but it doesn't seem to do anything. Every way I try to boot it it just goes into APX mode and ignores the SD card.
I've also tried this guide:
http://forum.xda-developers.com/showthread.php?t=974422
And I got the red message (which was exciting because it was finally something different ), but still got stuck in a tapntap loop after restoring with nvflash.
Anyone have any advice or something else for me to try? I would really appreciate it.
Thanks for reading
See this post.
After you've got CWM installed OK, boot into it, then partition the SD card (the internal one--remove any external microSD cards). This step will clear out the (internal) SD card. Misformatted or corrupted SD card partitions can also cause boot loops.
Thank you very much for the reply
K J Rad's procedure had a detail that I was missing. I had to hold the Volume + key BEFORE running the nvflash command to add CWM to get it to boot into CWM. After that started working the rest fell into place.
Thanks again!
I was having trouble with ADB on my newly acquired ViewSonic ViewPad E100. I thought rooting it and/or installing a new OS/ROM might help.
I saw this thread:
http://forum.xda-developers.com/showthread.php?t=2021203
Where someone pointed a guy to a universal root tool:
http://forum.xda-developers.com/showthread.php?t=1886460
I got the tool to run, and tried to use the #1 - New Standard Root - it got as far as to reboot the device.
Maybe I wasn't in trouble yet. But I waited for a bit and the device was still on the "ViewSonic" boot animation. I stupidly pulled the usb plug out to check out the device closer. It didn't boot. Then I restarted. I can no longer get farther than the "View Sonic" boot animation.
Okay, I know there's some special boot methods in Android, so I try a bunch of key combinations. Power+volume down doesn't seem to do anything [yet] but when I press Power+volume up, I get the android guy with a red exclamation in his belly:
http://i.stack.imgur.com/kcSE4.jpg
It's possible I see a flash of a better image, like this one:
http://www.android-hilfe.de/attachm...ery-rotes-warndreieck-2012-09-22-03.41.16.jpg
So no idea what to do. I figured it couldn't get much worse, so put a recovery "update.img" for a gtab on an SD card and then tried to reboot, with holding vol+power, just power, no luck with any combination.
Then I discovered 'nvflash'
http://raywaldo.com/2011/01/nvflash-for-dummies/
I think I'm following the steps right (for a gtab at least), but I can't get into APX mode. I can get *something* when I hold vol-down+power, I actually get my computer (Windows) to show me some internal storage of the device I guess... There's no way for me to install APX drivers, and I don't see the screen "flash" either, just sometimes I get USB storage attached.
Can I recover from this? Are there any more things I should be trying? Does anyone else out there have this device? Where else can I look for help? I just got this device this week and was hoping to use it for development!
Thanks in advance.