Hi guys,
Can I install : speedmod-kernel-s2-k1-t38.tar - [Click for QR Code]?
On my :
SGSII (2.3.4)
(Which I believe still stock ROM)
BaseBand : xxKG1
Kernel: XXKG6
Build GingerBread: XXKG6
I am in Australia and I am wondering if this is going to be suitable for my phone.
I am thinking of flashing with the Speedmod hoping that I will get stability and also good battery life (with speed if possible).
with installing the speedmod - will I get what I hope to get above?
Cheers for the info
I don't see why not. I used speedmod kernels while I was on KG6 and had no issues.
I found it to be very stable and battery life wasn't too bad either. It really depends on what you do with your phone.
miisterlim said:
I don't see why not. I used speedmod kernels while I was on KG6 and had no issues.
I found it to be very stable and battery life wasn't too bad either. It really depends on what you do with your phone.
Click to expand...
Click to collapse
Thanks for the reply.
if i install the kernel will it root the phone? Did you find any issues/bug when using the speedmod?
Cheers
Related
Hey me and friend installed the new TW007.1 on our x10's. Now im still learning how to get around this and all, but it seems like his phone is a little faster than mine, while mine has the lag about it. Difference i found is my kernel is on SEMCUser while his is on zdzihu-mod3.52. How do i got about getting the zdzihu kernel for Tw007.1??
Is it that or should i just root 2.1 on it and install custom rom again? it just seems so laggy my one
Thanks!
By the sounds of it you have flashed tw007.1 stock. Go on and download the one with custom kernel: http://www.mediafire.com/?0h7zy9apc4bxi98
use the 3.52 kernal
Hi all,
Sorry if this is kind of double post ( I have been advised to post it in this section)
Firstly I am a complete newbie so any step by step guide , pointer to the correct link or direction is so much appreciated.
My situation is:
I have SGS2 with:
Model Number: GT-I9100
Android Version : 2.3.3
Baseband Version: I9100xxKG1
Kernel 2.6..35.7-I9100ZSKG2-CL361136
Build number : GingerBread ZSKG2
1. I want to try either Litening Rom 6.1 or Darky ROM.
* Is this the correct Link to follow?
Darky: http://forum.xda-developers.com/show....php?t=1159920
Litening : http://forum.xda-developers.com/show....php?t=1095274
** Do I need to root the phone before installing the Litening ROM? or can I go ahead with my current spec and flash it with Litening ROM via ODIN?
2. I want to preserve my Current state of my Device before flashing with Darky or Litening.
* Is it possible to back up everything so I can return it to the way it is for Warranty purposes?
* or is it not possible to put back when we installed Darky or Litening?
3. Which one do you recommend Darky or Litening? - which one is less bug at this stage?
I am hoping that by flashing with the custom rom, it will make the device
- faster more efficient
- still able to get good GPS signal (or better)
- Good Wifi reception (or better)
- Good battery life (or better than now)
Please let me know if this is a false hope?
Thanks guys - sorry for the very basic questions.
Regards,
I am wondering if anyone else has experience the same process and would like to share their tips .
Thanks again guys
ardabelati said:
Hi all,
Sorry if this is kind of double post ( I have been advised to post it in this section)
Firstly I am a complete newbie so any step by step guide , pointer to the correct link or direction is so much appreciated.
My situation is:
I have SGS2 with:
Model Number: GT-I9100
Android Version : 2.3.3
Baseband Version: I9100xxKG1
Kernel 2.6..35.7-I9100ZSKG2-CL361136
Build number : GingerBread ZSKG2
1. I want to try either Litening Rom 6.1 or Darky ROM.
* Is this the correct Link to follow?
Darky: http://forum.xda-developers.com/show....php?t=1159920
Litening : http://forum.xda-developers.com/show....php?t=1095274
** Do I need to root the phone before installing the Litening ROM? or can I go ahead with my current spec and flash it with Litening ROM via ODIN?
2. I want to preserve my Current state of my Device before flashing with Darky or Litening.
* Is it possible to back up everything so I can return it to the way it is for Warranty purposes?
* or is it not possible to put back when we installed Darky or Litening?
3. Which one do you recommend Darky or Litening? - which one is less bug at this stage?
I am hoping that by flashing with the custom rom, it will make the device
- faster more efficient
- still able to get good GPS signal (or better)
- Good Wifi reception (or better)
- Good battery life (or better than now)
Please let me know if this is a false hope?
Thanks guys - sorry for the very basic questions.
Regards,
Click to expand...
Click to collapse
First its your own choose for a ROM.
But if you will Litening rom you must flash it with Odin.
For Darky ROM: I dont know.
For a better battery life check this thread.
Speedmod is the best battery kernel.
Your device is not very faster but a little bit.
I dont know about wifi and gps.
P.S I dont have a rooted SGS2
I found this link here:
http://forum.xda-developers.com/showthread.php?t=1095274
is this the one I need to follow?
Do I need to install speedmod or CWM separately if I want to install Litening ROM?
can I directly flash directly from :
Model Number: GT-I9100
Android Version : 2.3.3
Baseband Version: I9100xxKG1
Kernel 2.6..35.7-I9100ZSKG2-CL361136
Build number : GingerBread ZSKG2
to Litening ROM 6.1??
Thanks again
Yes, you can.
Litening rom will be a bit faster than Darky rom because litening will have already a overclocked frequency to 1.6Ghz with it.
Every custom rom build using stock like Darky & Litening & Villian will provide more stable system than Cyanogen, MIUI & AOSP roms. That's what I've experienced.
Problems that you may faced after flashing custom are it may has bootloop, stuck on splash screen. If you got a bootloop, try flash it again, sometimes it needs to flash twice. If splash screen never pass then do a full wipe in CMW, wipe user data, partition, wipe delvik.
Hey guys! I've been tinkering with other custom roms and ended with CM7. They all consume a lot of battery even if im just on CF-root kernel. So know i'm planning to go back to stock ROM so what would you guys recommend? KI3, KI8, KG6 etc..? I just want to enjoy the stock rom experience before going back to CM7
How about trying out ninphetamine 2.1.3? That is what I have been told. If you get something else better, please share.
You say stock so KI3 or KI8 .
But 90% of battery drain is user.
jje
which is the best combination of kernal ver and Rom for good battery life??
i am using
baseband :- XXKI3 (2.3.5)
sensation rom 1.8,
ninpetaine kernal 2.1.3,
with this i m getting 15-20hr battery backup with decent internet usage(1hr to 2hr) on 3g.
can u suggest me best combination of kernal ver and Rom for good battery life??
If you're looking for good battery life, try Lite'ning Rom v6.1
A KI3/8/KJ1/KJ3 type frankenstein rom combined with the latest 2-13 speedmod kernel.
No messing, close to stock, rooted, excellent battery life.
ki3 + speedmod k17
Thread closed.
Best relies on so many variables flash as what's best for someone else isn't likely to be best for you! Make a backup and flash away...............
Hi People I have a Problem that should be easy to solve for most of you ^^.
I have a rootet Galaxy S2 with the following rom on it:
.galaxys2root.com/galaxy-s2-roms/darky-ics-rom-for-rooted-galaxy-s2-gt-i9100-xxlpqofficial-ota/
My Device is running
Android Version: 4.0.3 (Official Samsung Firmware)
BaseBand: I9100xxlph
Kernel: 3.0.15-I9100xxlph-cl118559 [email protected] #3
build: lidroid-resurrection remix ics 9.6 by westcripro.build.version.incremental=xxlph
everything is working fine execpt the batterylife.
in my opinion the last rom (stock) was way better.
so my question is: is there any kernel that matches the rom i am actually using that increases the batterylife ?
at "normal" use my batt is loosing power very fast.
-no gps on
-display turned down
-wifi is not running
i am very new to those things. its my first xp with rooting and modding.
help would be nice.
Chainfire has a CF-root for LPQ. Maybe try that and have a mess about with the voltages?
Sent from my GT-I9100 using XDA
Acording to your device info your on LPH and thats a BETA firmware.Your battery wont get any better until you are running the official release LPQ firmware which has increased quite a lot the battery life in my opinion.Flash the LPQ firmware and an LPQ based custom ROM.