MeeGo for Tegra 2 devices - Folio 100 General

Anyone tried to port this to Toshiba Folio?
I see some work here with Vega and Gtablet
http://wiki.meego.com/ARM/TEGRA2
Some video of MeeGo tablet UI.
http://www.youtube.com/watch?v=GB-nnFhGKbk&feature=player_embedded#!

Looks nice. Seems to run on our oldish 2.3.32.9 kernel. Might be worth a try to get this working.

I copy MeeGo to sdcard with dd command and from fastboot ONLY BOOTED(NOT FLASH) 2.6.32 kernel for booting from sdcard(DerArtem's) with this command(like it said in readme file):
fastboot -c "boardtype=PR root=/dev/mmcblk1p1 init=/sbin/init usb-storage.delay_use=0 rootdelay=10 tegrapart=recovery:122000:a00:800,linux:a0e00:1000:800,loader:300:400:800,mbr:700:200:800,system:900:20000:800,cache:20900:80000:800,misc:a0900:400:800,userdata:a1f00:80000:800 [email protected] [email protected] vmalloc=192M video=tegrafb usbcore.old_scheme_first=1 debug" boot boot.img
BUT
during boot I saw that sdcard is recognized,(and) first cpu stopped.(and) I'm not sure for init, it said that init isn't fond(that's ok, I unpacked boot.img and there're nothing in ramdisk folder and there're something else under init not found. Some words and numbers that I don't understand. Init is in /sbin folder, I checked. I set init position in fastboot command(init=/sbin/init) and I forgot, it said that it's try to pass "init=" and after that some strange words and numbers.
Is it problem in booting kernel but I think that isn't, I this thread ==> http://forum.xda-developers.com/showthread.php?t=899976 (post 6, wolfx) he only boots kernel.
What's the problem???
Thank's in advice!!!

Related

[HOWTO] Ubuntu on Folio 100

I'm sorry it took so long, I got lots of stuff to deal with. Good things are worth waiting for (i heard)
First off: You are responsible for any of your actions! Changes that are needed to boot Ubuntu on your folio will void your warranty!
Special Thanks goes to DerArtem for posting his Kernels, Weeds2000 for eMail support, topogigi for wifi hacking and last but not least the Ubuntu-Touch Team on IRC that made it possible for me to tweak the touchscreen driver.
However, the system you are about to create is not fully functional, there are still things missing (a working sound driver for example). Its nice to play with it anyway
Heres a quick walk-through:
We will flash a kernel to the toshiba folio tablet which makes it possible to boot from an sdcard or USB-stick (You have to choose one, we need at least 2GB, I'd recommend 4GB so you can install fancy stuff like OpenOffice etc.).
We will then create a root filesystem with rootstock, which will hold our Ubuntu system (similar to your hard drive-Ubuntu).
Finally, we have to tweak that filesystem and change passwords, copy wifi driver etc.
Then we're able to boot a beautiful Ubuntu.
Things you will need:
- A Computer running Linux (Debian / Ubuntu would be great. If you're not running Linux on your computer, running it on the folio would make absolutely no sense. Please don't ask, I don't know how to install it in Windows.)
- The files i added to this post
- A SD-Card, 2-4 GB should be fine.
- optional: A second SD-card, 128MB would be enough (for flashing)
- A USB hub (If you want to boot from USB AND use a keyboard.
- Some time... =)
The first thing you should do is flash one of the update.zip files; choose update-sdmmc.zip (this will boot your folio from sdcard) or update-usb.zip (this will boot from a usb pen drive), open it and unpack the content to a sdcard (This has to be a SDcard, we're gonna flash our device from there.)
Backup all your data on your folio (I'm serious! It'll be gone!) and turn it off.
Put the SDcard in its slot and turn the folio back on. Press + hold both power and volume up.
Follow instructions to do a system update (If you've never done this before you shouldn't start now =) )
When it reboots, your folio will show some funny black and white linux text stuff and hang somewhere. Congratulations! You just bricked your tablet. Now lets see how we can fix it... Turn it off (Keep power pressed for about 5 seconds) and take out the sdcard, put it in your PC.
It's getting messy now, so grab a beer and let's go:
Open a Terminal on your linux computer.
Code:
#echo "Hello world!"
If your console says "Hello World" you got it. Awesome! =)
Code:
#sudo apt-get install rootstock gparted
This will install rootstock, the tool we're gonna need to create our filesystem, as well as gparted, a tool for partitioning our flash drive. You can also install rootstock-gtk, the graphical version. Try it if you like:
Code:
#sudo apt-get install rootstock-gtk
I heard that ubuntu-netbook won't work because there are drivers missing, would somebody try that and report please?
If your beer is already empty when this is done, you need a faster computer. Tell your wife the guys at xda-developers told you so
Back to the terminal:
Code:
#sudo rootstock -f MyCoolHostName -l myCoolUserName -p myCoolPassword --seed xubuntu-desktop -i 2G --notarball
This will create our filesystem with a user called "myCoolUserName" and (theoretically) his password "myCoolPassword" and install a basic xubuntu-desktop. I had to change the password manually because it didn't work this way... We'll do that later.
Rootstock will download lots of packages (You could also set it up with "--seed ubuntu-desktop", then youll download even more packages or "--seed ubuntu-minimal" or kubuntu... I still didnt find a list of seeds online :-/
The creating will take quite some time, get another beer.
When this is done, you'll get a file like this : "qemu-armel-201104112120.img". We will now mount this image: (make sure the directory /mnt/ does exist and is empty:
Code:
#ls -la /mnt )
Code:
#sudo su
(its simpler to be root for now)
Code:
#mount -o loop qemu-armel-201104112120.img /mnt/
(You are aware that your filename is different, are you? Try this:
Code:
# mount -o loop qemu-armel-*TAB*
and your terminal will automatically fill in your filename. Awesome linux, huh? =)
)
Code:
#cd /mnt/etc/
#mv fstab fstab.bak
#echo "proc /proc proc defaults 0 0" > fstab
#echo "dev /dev tmpfs rw 0 0" >> fstab
Note that the first time we create a file called fstab (echo asdf > fstab), then we add one line to this file (echo asdfasdf >> fstab)
Now we need to copy our wifi-driver over. Remember I told you to write down the directory you put them in? =)
Code:
#cp /home/YourUserName/Desktop/FolioStuff/firmware /mnt/lib/firmware
We will now do something stupid: We chroot into our arm-based system from an intel-system. But since we're only changing passwords, we should be OK.
Code:
#cd /
#chroot /mnt/
#passwd myCoolUserName
#passwd
#exit
That's it, we're out of the chroot.
It's now time to prepare the SDcard (The steps are the same for a USB Flash drive, I think you'll figure them out.)
Find out how your SDcard can be accessed (You should still be root):
Code:
# fdisk -l
In my card reader, it's "/dev/mmcblk0", it could also be "/dev/sdb1" in your computer.
Now there are two possibilities:
1. You know what youre doing. Then it's easy: You wipe the only partition (or, if there are more than one, the first partition) on your sdcard and format it with ext3:
Code:
#mkfs.ext3 /dev/mmcblk0p1
Note: The device is called /dev/mmcblk0, the partition itself /dev/mmcblk0p1 (Partition 1)
2. You are not sure about this. No problem, start gparted: (as root!)
Code:
#gparted
In the upper right corner, select your flash drive, delete all partitions and create one formatted with ext3. Close gparted.
Mount your freshly created partition somewhere (i chose /mnt2/):
Code:
#mkdir /mnt2/
Code:
#mount /dev/mmcblk0p1 /mnt2
We can now copy our filesystem over. Make sure you use exactly the same flags (rfp for recursive, force, preserve (attributes))
Code:
#cp -rfp /mnt/* /mnt2/
OK, that could work. Unmount the sdcard:
Code:
#umount /mnt2/
Put it in your folio and cross your fingers.
Wifi drivers will be up soon...
It's recommend to add build-essentials to your rootstock image too..
Because then you can easily build the wireless lan drivers on your devices..
Maybe I'll post a howto this afternoon!
Is this Ubuntu really usable (for daily work) with the folio 100 (touch, response speed, ecc.)?
Thanks.
Yup, it's usable for everyday work. It's quite fast on the Folio 100, I've been pretty impressed when I tested it a few weeks ago.
Thanks ph84
It seems most difficult than expected but, great job !
Only i have 1 question, bricking the tablet sounds dangerous... is possible break out the tablet and get a rock?
Thanksss!!!!!
if ubuntu is installed on sd, does that mean that we can dual boot foliomod from nand and ubuntu from sd/usb?
Hm... I'm using Ubuntu 11.04 and I'm getting this error at the end of the rootfs creation :
E: Sub-process /usr/bin/dpkg returned an error code (1)
E: Second stage build in chroot failed !
E: Please see the log to see what went wrong.
I: Cleaning up...
.....
I: Umounting temporary Image
umount2: Dispositivo o risorsa occupata
umount: /tmp/tmp.zaZ1j1Tgt6/tmpmount/proc: device is busy.
(In some cases useful info about processes that use
the device is found by lsof(8) or fuser(1))
umount2: Dispositivo o risorsa occupata
Click to expand...
Click to collapse
Do you have any idea where I can find the log?
And this procedure will build in the tablet a dual boot? Or dualboot is another procedure?
what is the *.rar????
No it's for singleboot only...
You can only start Ubuntu installed on SD-Card/USB-Stick with this procedure...
I don't know wether the boot-partition is locked when you are booting ubuntu/android..
If not it should be possible to build some applications to flash the boot-partition on the running system to change from ubuntu to android
When I do the rootstock step,I got this error!!!Please help!!!
I: Base system installed successfully.
I: First stage install done
I: Using Chroot for installer
Adding 'local diversion of /usr/sbin/invoke-rc.d to /usr/sbin/invoke-rc.d.rootstock'
Generating locales...
en_GB.UTF-8... done
Generation complete.
Generating locales...
en_US.UTF-8... done
Generation complete.
/bin/installer: line 53: syntax error near unexpected token `+'
E: Second stage build in chroot failed !
E: Please see the log to see what went wrong.
I: Cleaning up...
.....
I: Umounting temporary Image
I: A logfile was saved as //rootstock-201104140706.log
I: Done
Click to expand...
Click to collapse
Could you upload an *.img for us in this forum?
or a databank,etc?
mhmm it always hangs in the xulrunner configuration.. bahh someone know a solution for this? or does i realy have to chroot the rootfst and install everything manualy =(? Cant find any solution on google for this bug =/
sony_tornado said:
what is the *.rar????
Click to expand...
Click to collapse
Nvm, I was talking crap...
schnudergof said:
mhmm it always hangs in the xulrunner configuration.. bahh someone know a solution for this? or does i realy have to chroot the rootfst and install everything manualy =(? Cant find any solution on google for this bug =/
Click to expand...
Click to collapse
Just try rootstock without the parameters on --seed..
Maybe it will work..
You wont have a Desktop Enviroment like Gnome or something but you wont need that for installing the wireless drivers...
And after installing wireless drivers you can install ubuntu-desktop or something with apt-get!
Ok, I have been looking at rootstock, and if you install rootstock-gtk and than click on tasksel there is a whole list of seeds to chose from. I Think im going to try build the netbook build.
On a side note:
We will now do something stupid: We chroot into our arm-based system from an intel-system. But since we're only changing passwords, we should be OK
Click to expand...
Click to collapse
with chroot your only changing the root of your file system, your not running anything from there.
But its its in no way a complaint to your awesome guide! Thanks and keep up the good work!
shidima_101 said:
with chroot your only changing the root of your file system, your not running anything from there.
Click to expand...
Click to collapse
Thats right but when you change your root shell to the rootstock-fs you can also use sudo apt-get update/install and install it into the rootfs!
ph84 said:
Meanwhile, open another terminal. (This is linux! We're gonna multitask since our computer is capable of handling that!) Go to where you stored the attached files, for example
Code:
#cd /home/YourUserName/Desktop/FolioStuff
and unpack them:
Code:
#rar x *.rar
Click to expand...
Click to collapse
Where/what is the "attached files"?
Thanks
Just go to the first page, press STRG+F and type attached into the search window...
I hope you will find the attached files.. Else you dont have to try installing ubuntu on your folio >_<
°EraZoR° said:
Just go to the first page, press STRG+F and type attached into the search window...
I hope you will find the attached files.. Else you dont have to try installing ubuntu on your folio >_<
Click to expand...
Click to collapse
The files I found are only *.zip for update bootloader. Where is *.rar file?
Thanks

[ROM] Build Your Own Dell Venue Rom > Froyo > Gingerbread > Ice Cream

I wish to open New Thread for enable focus into developing custom rom for dell venue and expecting get some suggestion, comment, help from other members of this forum :
I have wrote brief guide to prepare build environment and build kernel & rom for dell venue HERE
I do test to emulator and device all build result before posting to this thread, but need other user/member willing to test the build and post any suggestion, comment etc.
Starting by building froyo base rom, to test and ensure the buiild process is correct and exepcting to build further base i.e gingerbread and ice cream sandwich
since I'm terrible noob in android development, help, guide, suggestions are very welcome
-update-
Kernel Build
I have been succesfully "build" a kernel HERE
I splited 408-kernel to "borrow" the ramdisk (To make it easy I renamed file boot.img of 408-kernel into boot408.img.
Code:
[[email protected] venimg-1]$ split_bootimg.pl boot408.img
Page size: 2048 (0x00000800)
Kernel size: 3092536 (0x002f3038)
Ramdisk size: 168270 (0x0002914e)
Second size: 0 (0x00000000)
Board name:
Command line: androidboot.hardware=venue
Writing boot408.img-kernel ... complete.
Writing boot408.img-ramdisk.gz ... complete.
extracted ramdisk
Code:
[[email protected] ramdisk]$ gzip -dc ../boot408.img-ramdisk.gz | cpio -i
561 blocks
edited ro.secure=1 to re.secure=0
recreate cpio archive
Code:
$ mkbootfs ./ramdisk | gzip > ramdisk-408-2.gz
recreate boot image by using new build kernel named zImage-05
Code:
$ mkbootimg --cmdline 'androidboot.hardware=venue console=null' --kernel zImage-05 --ramdisk ramdisk-408-2.gz -o boot408-2.img
flash boot408-2.img > NO LUCKS > NOT BOOTING .. I'm clueless. Anybody give an idea ?
-update-
My failed to make "succesfull build kernel" to "boot" is the absent of info : BOARD_KERNEL_BASE (address) for dell venue. Someone can appoint me where I can get this info?
please test
changkho1908 said:
please test
Click to expand...
Click to collapse
this is very early stage of development build with available source. As I found HERE available ICS Chocolate Branch Manifest for msm7627. I will personally do experiment to build this ICS branch for dell venue.
I still need help from someone to understand and appoint a clue to this information at the end of build process :
Code:
.....
APK certs list: out/target/product/msm7627_surf/obj/PACKAGING/apkcerts_intermediates/msm7627_surf-apkcerts-eng.x.txt
Package target files: out/target/product/msm7627_surf/obj/PACKAGING/target_files_intermediates/msm7627_surf-target_files-eng.x.zip
Package OTA: out/target/product/msm7627_surf/update.zip
./build/tools/releasetools/ota_from_target_files:63: DeprecationWarning: the sha module is deprecated; use the hashlib module instead
import sha
unzipping target target-files...
using device-specific extensions in device/qcom/common
[B][I][COLOR="Red"]unable to load device-specific module; assuming none[/COLOR][/I][/B]
done.
sysmtem is alive but boot (kenel) is still NON BOOTABLE ... I believed by working together we will have "something" for this device
The 40x roms are based off of the MSM8x60 branches, as they dont implicitly list 8260 they likely used 8660 as their base.
I dont know if the 8x60 is closer to the 8x50 then the 7627, but just pointing it out.
You might be better off at least getting 2.2/2.3 to boot first, you may very well need to deal with the drivers and at least 2.2/2.3 have working binary-only drivers.
TheManii said:
The 40x roms are based off of the MSM8x60 branches, as they dont implicitly list 8260 they likely used 8660 as their base.
I dont know if the 8x60 is closer to the 8x50 then the 7627, but just pointing it out.
You might be better off at least getting 2.2/2.3 to boot first, you may very well need to deal with the drivers and at least 2.2/2.3 have working binary-only drivers.
Click to expand...
Click to collapse
Dear TheManii,
I believed you are one who having well understanding on this funky smart phone. please let me know qsd8x50 : is the name of processor isnt it > qualcom snap dragon (qsd) and how about MSM8x60 <-- this is name of BOARD of Name or Processor. When coming into building kernel I need to have correct understanding. So far I know only the ARCH. Is there any wiki or site page to refer. This is example when I was on old time with gentoo linux on compiling kernel for PC > Safe Cflags. Board understanding will help in configure config file, processor understanding will help in overclocking or set best and safe for building kernel.
binary only available driver will always make head-ache in open source community. Hopefully vendor releasing the driver copy sorry for the question, I'm really new to this embedded device
Snapdragon is the device family, 8250 is the specific SOC used in the venue.
Like I stated earlier, dell used the 8x60 branch as their base as qualcomm/CAF no longer supports 8x50 devices. I dont know if it's better or worse as the group that makes the roms pretty much does a terrible job at it, the venue has only a fraction of the issues of the streak 5 (due mainly to drivers), but there's not much you can say to defend them when it takes over a year to release GB (in fact it was just days after ICS was released) for the venue.
Dell cant and wont release the drivers to any of their devices, most of them except the streak 5 arent unusual anyway. The reason ICS has a beta for the S7 is this very fact.
You can likely base it on the nexus one/passion as it's likely not terribly different from it.
I dont expect the GB drivers to simply work in ICS, and since we dont have them you'd pretty much need to rewrite/port from a similar device using the same hardware.
At least with the current drivers, you could theoretically build the rest of the system and drop in the current ones. I've never had the time to try so myself but this is pretty much how cyanogen is ported to some devices.
That's pretty much ALL the info for the venue, as I'm the closest to a dev for it (at least on xda, there's other devs but they dont speak english much/visit xda much so it doesnt really make much of a difference in the end) and that's about as much as I can offer.
I cant really offer much more as I've never attempted to build android itself. Most I've done is build the makefiles to compile CWM. The makefiles for android is a lot more complex then merely porting CWM
dear all,
can someone appoint me out to have correct GB manifest on codeaurora ? I tried
Code:
[email protected]:~/dell-venue$ gingerbread_rel -m M7630AABBQMLZA404020.xml ^C
[email protected]:~/dell-venue$ repo init -u git://codeaurora.org/platform/manifest.git -b gingerbread_rel -m M7630AABBQMLZA404020.xml --repo-url=git://codeaurora.org/tools/repo.git
.repo/manifests/: manifest switched gingerbread_chocolate...gingerbread_rel
.repo/manifests/: discarding 70 commits removed from upstream
fatal: manifest 'M7630AABBQMLZA404020.xml' not available
fatal: cannot link manifest M7630AABBQMLZA404020.xml
I did many googling, still No lucks I agree to Guru TheManii advise to make GB kernel booting first then investigate to port ICS into dell venue.
***dell venue make me very currious (and also fustating)***
x1123 said:
dear all,
can someone appoint me out to have correct GB manifest on codeaurora ? I tried
Code:
[email protected]:~/dell-venue$ gingerbread_rel -m M7630AABBQMLZA404020.xml ^C
[email protected]:~/dell-venue$ repo init -u git://codeaurora.org/platform/manifest.git -b gingerbread_rel -m M7630AABBQMLZA404020.xml --repo-url=git://codeaurora.org/tools/repo.git
.repo/manifests/: manifest switched gingerbread_chocolate...gingerbread_rel
.repo/manifests/: discarding 70 commits removed from upstream
fatal: manifest 'M7630AABBQMLZA404020.xml' not available
fatal: cannot link manifest M7630AABBQMLZA404020.xml
I did many googling, still No lucks I agree to Guru TheManii advise to make GB kernel booting first then investigate to port ICS into dell venue.
***dell venue make me very currious (and also fustating)***
Click to expand...
Click to collapse
good luck for you, we are always support you
changkho1908 said:
good luck for you, we are always support you
Click to expand...
Click to collapse
cũng chỉ biết good luck for you àh
nguyen_vh said:
cũng chỉ biết good luck for you àh
Click to expand...
Click to collapse
đệt, chú muốn thế nào nữa
I tested to build android and using three source : codeaurora, cyanogen, aosp. To build GB on codeaurora I just can not find correct manifest. On cyanogen just wont build (for certain device) without proper propreitary binary drivers. On aosp ... well, build is easier. From TheManii advise I build GB aosp > passion and will not boot to be flashed to dell venue. I change the kernel with 408, rom is alive on device, but No wireless functionality work, either gsm or wifi. Anyone can give a clue where to get radio.img for dell venue? to build booting customs android kernel for venue still no lucks for me.
if someone want to take a look please download passion build packed with 408 kernel HERE flashable via cwm recovery. This will not brick your device.
To turn back device into normal android usage just flash TheManii StreakDroid4-250 without wipe anything. I put StreakDroid4-250 file also HERE just for make easier to download from my region (Indonesia).
split / unpack / repack boot.img
Hi Guys,
My biggest problem to determine how to pack kernel into boot image is solved. I optimistic to have booting kernel and pack into boot image. I cant determine the board kernel base address. Now I found out the base address is 0x20000000 (twenty million). I have test the coomand line and work well. This is the test procedure > download live boot.img (mean its proved bootable). I toke 408-boot image from many Streakdriod4 rom ... thanks to TheManii :
Code:
$ split_bootimage.pl 408boot.img
(I renamed boot.img to 408boot.img for easy remember)
output
Code:
Page size: 2048 (0x00000800)
Kernel size: 3092536 (0x002f3038)
Ramdisk size: 168270 (0x0002914e)
Second size: 0 (0x00000000)
Board name:
Command line: androidboot.hardware=venue
Writing 408boot.img-kernel ... complete.
Writing 408boot.img-ramdisk.gz ... complete.
...
Now I have in the folder > 3 files : 408boot.img 408boot.img-kernel 408boot.img-rakdisk.gz. We test our command line > to repack kernel and ramdisk into boot image and must be flashable to device and booting :
Code:
$ mkbootimg --kernel 408boot.img-kernel --ramdisk 408boot.img-ramdisk.gz --pagesize 2048 --cmdline "androidboot.hardware=venue" --board venue --base 0x20000000 -o new408boot.img <ENTER>
You should have new408boot.img bootable into our venue viat fastboot > test >
Code:
$sudo fastboot earse boot (to ensure existing boot is clean)
$sudo fastboot flash boot new408boot.img
$sudo fastboot reboot
...
Mu dell venue with TheManii rom booting properly.
But we need to ensure everything work well. Let us utilize second procedure well known in the world
Code:
$rm 408boot.img-kernel 408boot.img-ramdisk.gz new408boot.img [B][COLOR="Red"](to clean the folder).[/COLOR][/B]
$unpack-bootimg.pl 408boot.img [ENTER]
OUTPUT WILL BE
Code:
kernel written to 408boot.img-kernel.gz
ramdisk written to 408boot.img-ramdisk.cpio.gz
561 blocks
extracted ramdisk contents to directory 408boot.img-ramdisk/
By using UNPACK method we will have THREE file (four including 408boot.img) in folder
408boot.img 408boot.img-ramdisk 408boot-ramdisk.cpio.gz 408boot.img-kernel.gz
I choose unpack method since I wanna to test all command line available in internet is working properly. I change initlogo.rle with one I download from internet and edit default.prop file.
Code:
$nano -w 408boot.img-ramdisk/default.prop
EDIT THE text > ro.secure=1 TO ro.secure=0.
change initlogo.rle with other FILENAME.rle (You can download from internet)
Now we have ramdisk file (folder) with different default.prop file and initlogo.rle file (different image .. default is dell logo)
Create new ramdisk file to enable us create bootable image
Code:
$mkbootfs 408boot.img-ramdisk | gzip > new408-ramdisk [ENTER]
we should have file named new408-ramdisk gziped
Now repack kernel and new ramdisk >
Code:
$mkbootimg --kernel 408boot.img-kernel.gz --ramdisk new408-ramdisk --pagesize 2048 --board venue --cmdline "androidboot.hardware=venue --base 0x20000000 -o realynewboot.img [ENTER]
...
flash realynewboot.img via fastboot my boot splash changed into image attached ...
for step by step ... i put on MY BLOG
I share this to have someone try together to compile a kernel and convert into bootable image. with this kernel proble tackled ... build ROM is easier
Booting kernel
Hi Folks,
attached is booting kernel for dell venue. I tried on GB Rom (TheManii Rom) Steakdroid4-2.5.0.
Build info :
- Build from source tree : DJSteve-StreakKernel-92bf64f
- using 408config > extracted from 408boot.img
- switched off back cover awareness (I dont know what exact name) feature
- ramdisk > splitted ramdisk from 408-boot image.
- flashable via fastboot
- download atachement
- boot to fastboot
-$ sudo fastboot erase boot
-$ sudo fastboot flash boot djsteveboot.img
-$ sudo fastboot reboot
NOTE
This is development stage kernel. so please only try if you can tackle all problem. Good news flash the boot WILL NOT brick Your device
share here the result
x1123 said:
- switched off back cover awareness (I dont know what exact name) feature
Click to expand...
Click to collapse
It's redundant on the V at least, as it has no door sensor/doesnt care if the back cover is off. I do that all the time to hot swap memory cards.
Even the stock kernel will allow you to remove the door and not complain
Hi, I built a kernel too but based on Venue (4.06) sources.
http://forum.xda-developers.com/showthread.php?p=23544539#post23544539
You can check my sources here :
https://github.com/adridu59/dell-venue-kernel
The Venue codename is 'toucan'.
There are Venue-specific files and I do not know whether they are present in the Streak source you used.
I am developing a CM7 build myself. In fact, things are OK except the fact that the kernel is still stock 408 (things about setting up the working environment is here: http://forum.xda-developers.com/showthread.php?t=1687679).
After being able to build CM7 myself, I will turn back with the kernel issue for 2.3.x. Then, proceed to Android 4 ICS. God bless all of us!

[Q] View kernel messages on Transformer Prime

Is it possible to see the messages of my CM kernel while booting, either on the tablet screen, or in some other way (e.g. USB serial terminal)? I am trying to find why a kernel doesn't boot (and I suspect that it is flashed correctly but it panics for some reason), so dmesg-after-the-fact is not useful.
The /proc/cmdline of the current CM running on the tablet contains some properties that sound relevant (like 'console' and 'debug_uartport'):
Code:
$ cat /proc/cmdine
tegraid=... [email protected] vmalloc=256M androidboot.serialno=... video=tegrafb no_console_suspend=1 console=none debug_uartport=hsport usbcore.old_scheme_first=1 [email protected] [email protected] core_edp_mv=1300 audio_codec=wm8903 tegraboot=sdmmc gpt gpt_sector=60415999 androidboot.product=TF201 androidboot.carrier=wifi-only
(I have replaced some stuff with ... in the output above)
What I do:
1. Recompile the kernel from its sources, to build a zImage.
2. Get a boot.img from a nandroid backup.
3. Unpack it using the AndroidRoot BootTools.
4. Use the zImage from step 1 with the ramdisk from step 3 and a cmdline like the one at /proc/cmdline to build a boot.img.
5. Boot tablet into fastboot and fastboot -i 0x0b05 boot boot.img to test the new kernel.
But step 5 fails silently, no output is shown (except from the fastboot message "Booting downloaded image"). According to http://bootloader.wikidot.com/linux:android:kmsg, setting console=tty0 should show the messages on the screen, but it doesn't (and neither do "=tty" or "=/dev/tty0").
For step 5... the command should be fastboot -i 0x0b05 boot boot.img
Perhaps this post might help.
http://forum.xda-developers.com/showpost.php?p=27658214&postcount=157
Basically, run your kernel, then flash the file from attachment in above post, then flash a known working kernel. The /proc/last_kmsg from your kernel should be in the /sdcard.
craigacgomez said:
For step 5... the command should be fastboot -i 0x0b05 boot boot.img
Click to expand...
Click to collapse
That was a typo, fixed it in my post, thank you!

[Q] Help completing a10 allwinner kernel compiling guide

Hi all,
My aim has been to compile a kernel for an Allwinner a10 F1-LY tablet (pengpod 700) that features PS3 and other gamepad support. I can upgrade my ROM to Cyanogenmod 10 to achieve this but then the hard buttons and screen rotation stop working.
After days of searching, reading and testing, I feel like I am close but need help getting over the line. I am running a virtualbox installation of Xubuntu.
Once I have this running, I will contribute a guide with screenshots back to the community.
My steps:
0. My device is running this ROM, which is JB 4.1.1 with root and CWM 5.5 installed. The image is based on a Seby build, and modified by Magica.
1. Install virtualbox and then 32 bit Ubuntu 13.0.4. Make sure you have 3D acceleration enabled and a decent amount of RAM allocated or it will run incredibly slow.
2. Install guest additions and a shared folder with the windows host machine.
3. Install some packages for later use:
Code:
sudo apt-get install gedit git ncurses5 jre-default
4. Make a folder in the home directory to work from. Open a terminal in it and then install the kernal library:
Code:
git clone https://github.com/linux-sunxi/linux-sunxi linux-sunxi
cd linux-sunxi
git checkout sunxi-3.0
5. Install the cross compile tool chain.
Download http://www.codesourcery.com/sgpp/lite/arm/portal/package7853/public/arm-none-linux-gnueabi/arm-2010.09-50-arm-none-linux-gnueabi.bin
Install with:
Code:
sudo ./arm-2010.09-50-arm-none-linux-gnueabi.bin
6. Setup kernel config.
Code:
make ARCH=arm sun4i_crane_defconfig
make menuconfig ARCH=arm
The second line opens up a GUI for configuring the kernel, where I activated the following options using here as a guide::
Code:
--- Networking support <*>
Bluetooth subsystem support --->
<*> HIDP protocol support
Bluetooth device drivers --->
<*> HCI USB driver
[*] HID Devices --->
Special HID drivers --->
<*> Sony PS3 controller
<*> DragonRise Inc. game controller
[*] DragonRise Inc. force feedback
<*> Pantherlord/GreenAsia game controller
[*] Pantherlord force feedback support
<*> GreenAsia (Product ID 0x12) game controller support
[*] GreenAsia (Product ID 0x12) force feedback support
<*> SmartJoy PLUS PS2/USB adapter support
[*] SmartJoy PLUS PS2/USB adapter force feedback support
I'm not sure if my thinking is correct here, but I went through the config and changed any modular options to included, to avoid the need for additional files to be copied to the device.
7. Compile kernel:
Code:
make ARCH=arm CROSS_COMPILE=/root/CodeSourcery/Sourcery_G++_Lite/bin/arm-none-linux-gnueabi-
This runs for a long time and will eventually produce a zImage file in the linux-sunxi/arch-arm-boot/ folder.
8. Get original boot.img from device.
To do this I booted into recovery mode and used the backup feature. This made a folder on my external SD card with boot.img and other archives. I then copied boot.img to the shared folder on my windows host.
9. Split original boot.img into zImage and ramdisk, replace zImage
Make a new folder in your home directory to keep this clean. Copy the original boot.img into this folder.
I downloaded and unzipped Adi_Pat's scripts from here. into the new folder.
The boot.img file will be unpacked with:
Code:
./extract.sh
Your zImage will be in kernel/zImage
Your ramdisk will be in ramdisk folder (unpacked)
Click to expand...
Click to collapse
I then deleted the zImage in the kernel folder and replaced it with the one compiled earlier from linux-sunxi/arch/arm/boot/. The ramdisk was left alone.
10. Modify script and repack boot.img
I'm aware that Adi_pat's script is for a different device, so I modified the pack_boot.sh script to suit the a10. Line 31 becomes:
Code:
./tools/mkbootimg --kernel kernel/zImage --ramdisk ramdisk.gz -o out/boot.img --base 0x40000000 --cmdline 'console=ttyS0,115200 tw init=/init loglevel=8' --pagesize 2048
This is based on searching and the the information given when running extract.sh. The updated script can now be executed:
Code:
./pack_boot.sh
A new boot.img is created at out/boot.img.
11. Put new boot.img onto device and flash.
I copied the new boot.img into my shared folder and then onto a SD card. Using a root file explorer on the device, move the boot.img file to the /sdcard directory. Open Novo7 tools and then go to the flash boot.img option.
12. Reboot device
When the device reboots, it hangs on the first Android logo, so clearly something has been done incorrectly. Fortunately I can recover to a working device from the backup in CWM recovery in just a few minutes.
Obviously I'm doing something wrong here, and would appreciate any pointers to get it working.
I have searched and read for days, so I am sorry if I have missed a thread that answers this for me.
Many thanks in advance.
lawgic said:
Hi all,
My aim has been to compile a kernel for an Allwinner a10 F1-LY tablet (pengpod 700) that features PS3 and other gamepad support. I can upgrade my ROM to Cyanogenmod 10 to achieve this but then the hard buttons and screen rotation stop working.
After days of searching, reading and testing, I feel like I am close but need help getting over the line. I am running a virtualbox installation of Xubuntu.
Once I have this running, I will contribute a guide with screenshots back to the community.
My steps:
0. My device is running this ROM, which is JB 4.1.1 with root and CWM 5.5 installed. The image is based on a Seby build, and modified by Magica.
1. Install virtualbox and then 32 bit Ubuntu 13.0.4. Make sure you have 3D acceleration enabled and a decent amount of RAM allocated or it will run incredibly slow.
2. Install guest additions and a shared folder with the windows host machine.
3. Install some packages for later use:
Code:
sudo apt-get install gedit git ncurses5 jre-default
4. Make a folder in the home directory to work from. Open a terminal in it and then install the kernal library:
Code:
git clone https://github.com/linux-sunxi/linux-sunxi linux-sunxi
cd linux-sunxi
git checkout sunxi-3.0
5. Install the cross compile tool chain.
Download http://www.codesourcery.com/sgpp/lite/arm/portal/package7853/public/arm-none-linux-gnueabi/arm-2010.09-50-arm-none-linux-gnueabi.bin
Install with:
Code:
sudo ./arm-2010.09-50-arm-none-linux-gnueabi.bin
6. Setup kernel config.
Code:
make ARCH=arm sun4i_crane_defconfig
make menuconfig ARCH=arm
The second line opens up a GUI for configuring the kernel, where I activated the following options using here as a guide::
Code:
--- Networking support <*>
Bluetooth subsystem support --->
<*> HIDP protocol support
Bluetooth device drivers --->
<*> HCI USB driver
[*] HID Devices --->
Special HID drivers --->
<*> Sony PS3 controller
<*> DragonRise Inc. game controller
[*] DragonRise Inc. force feedback
<*> Pantherlord/GreenAsia game controller
[*] Pantherlord force feedback support
<*> GreenAsia (Product ID 0x12) game controller support
[*] GreenAsia (Product ID 0x12) force feedback support
<*> SmartJoy PLUS PS2/USB adapter support
[*] SmartJoy PLUS PS2/USB adapter force feedback support
I'm not sure if my thinking is correct here, but I went through the config and changed any modular options to included, to avoid the need for additional files to be copied to the device.
7. Compile kernel:
Code:
make ARCH=arm CROSS_COMPILE=/root/CodeSourcery/Sourcery_G++_Lite/bin/arm-none-linux-gnueabi-
This runs for a long time and will eventually produce a zImage file in the linux-sunxi/arch-arm-boot/ folder.
8. Get original boot.img from device.
To do this I booted into recovery mode and used the backup feature. This made a folder on my external SD card with boot.img and other archives. I then copied boot.img to the shared folder on my windows host.
9. Split original boot.img into zImage and ramdisk, replace zImage
Make a new folder in your home directory to keep this clean. Copy the original boot.img into this folder.
I downloaded and unzipped Adi_Pat's scripts from here. into the new folder.
The boot.img file will be unpacked with:
Code:
./extract.sh
I then deleted the zImage in the kernel folder and replaced it with the one compiled earlier from linux-sunxi/arch/arm/boot/. The ramdisk was left alone.
10. Modify script and repack boot.img
I'm aware that Adi_pat's script is for a different device, so I modified the pack_boot.sh script to suit the a10. Line 31 becomes:
Code:
./tools/mkbootimg --kernel kernel/zImage --ramdisk ramdisk.gz -o out/boot.img --base 0x40000000 --cmdline 'console=ttyS0,115200 tw init=/init loglevel=8' --pagesize 2048
This is based on searching and the the information given when running extract.sh. The updated script can now be executed:
Code:
./pack_boot.sh
A new boot.img is created at out/boot.img.
11. Put new boot.img onto device and flash.
I copied the new boot.img into my shared folder and then onto a SD card. Using a root file explorer on the device, move the boot.img file to the /sdcard directory. Open Novo7 tools and then go to the flash boot.img option.
12. Reboot device
When the device reboots, it hangs on the first Android logo, so clearly something has been done incorrectly. Fortunately I can recover to a working device from the backup in CWM recovery in just a few minutes.
Obviously I'm doing something wrong here, and would appreciate any pointers to get it working.
I have searched and read for days, so I am sorry if I have missed a thread that answers this for me.
Many thanks in advance.
Click to expand...
Click to collapse
I am heavily into the allwinner tablets and would like to get CM10 install. I ran into the same issue until I build kernel 3.0.8 but you MUST put the generated NAND.KO file into the ramdisk folder and edit the init.sun4i.rc file to load it before anything else...this should get rid of the issue. I have a serial port I added to my tablet so Its a bit easier to troubleshoot and edit uboot vars when needed. If you would like to collaborate let me know.i have a 95% working android build environment that works for my tablet, only the gsensor is inverted which is a simple fix.
Michael Pizzileo
BinaryDroid
I am working with a Polaroid Tablet (pmid10c) and have been attempting to build and install a newer kernel with no success. Any help/guidance would be great. I am currently working in this thread: http://forum.xda-developers.com/showthread.php?p=46685741#post46685741 please chime in with any advice you may have.
Thanks

[HOW-TO] extract kernel from source, compile, and insert on GPE (510)

How to extract the boot image from your tablet, set up adb, compile a new kernel with cool options, and put it back on your device!
UPDATED for Lolipop 12-4-14
This is a complete guide from start to finish, copy and paste style. If you own a gpe510, or any other AOSP device and a computer running Debian Linux, you can do all of this.
If all you want is the modified kernel, download from here:
Sleekai Kernel For The LG GPad 8.3 V510(GPE)
​
I am hoping people will add to this with new ideas and patches in order to make the GPE a better device. I see the potential for all sorts of neat stuff.
This guide assumes a basic knowledge of linux operating systems. I am using a Debian 64 bit (wheezy stable) to compile my kernel. I have used many, many hours of the day to figure this out properly, with specific thanks going to Pete of Pete's Blog for his image tools.
But first, lets keep this simple. As usual, you are on your own if you brick your device, though I don't see how you could if you are paying attention!
There are dependencies for building your own kernel, and you will definitely want to use a 64 bit system as a 32 bit will not work properly for kitkat.
Here are all of the packages you will need, and they will draw in further dependencies when you install, but these are it! So, here we go:
Open a terminal, su to root and:
Code:
dpkg --add-architecture i386
##This will allow for the use of some 32 bit librarys that we will need for both adb and the kernel compile. Then:
Code:
apt-get update ; apt-get install libc6:i386 libncurses5:i386 libstdc++6:i386 libc6-i686:i386 lzop liblzo2-dev libgpm2:i386 git-core git gnupg flex bison gperf libsdl1.2-dev libesd0-dev build-essential zip curl gedit libncurses5-dev zlib1g-dev fakeroot lib32z1-dev lib32ncurses5-dev gcc-multilib g++-multilib
Next, you will need to install adb and have your permissions set up.
In order to do this you will need to go into the developer options on your device to enable debugging on your tablet. Go to settings/about tablet/build number, and tap on build number several times to unlock the developer options.
then:
You will need to create new udev rules for your device in/etc/udev/rules.d on your computer.
Use "lsusb" in your terminal to find the manufactures code of your device. it will show up as a nexus 4, or Google device.
You will need to create a file in your computer in /etc/udev/rules.d/99-android.rules.
You can use gedit if you like:
Code:
gedit /etc/udev/rules.d/99-android.rules
Put the following inside and save, changing the manufactures code as necessary to fit your device, and change “your-login” to your login name on your computer.
Code:
# Google Nexus devices
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", MODE="0666", OWNER="your-login" # Google Nexus devices
18d1 is the manufacturers code.
You will then want to restart udev on your computer:
Code:
service udev restart
you will now have permissions to access your android device from user space.
Now to download adb and get started. You should probably not use adb from the Debian repositories, as it may be an older version. the V510 is using kitkat android and needs the latest build of adb to work properly. It is a good idea to get rid of any old adb files on your computer first. The code below will do just that.
Code:
apt-get purge android-tools-adb android-tools-fastboot
Now download the latest adb bundle from here:
http://developer.android.com/sdk/index.html
Move it into a new directory,
*note -the version number may be different.
Code:
mkdir ~/adb
Code:
cd ~/adb
Code:
unzip adt-bundle-linux-x86_64-20131030.zip
su to root and Move the bundle to /opt:
Code:
mv adt-bundle-linux-x86_64-20131030 /opt/android-sdk-linux-x86_64-20131030
Other google products reside in /opt, this should too. This takes a minute or so on slow machines.
Next we need to link adb to /usr/bin
Code:
ln -s /opt/android-sdk-linux-x86_64-20131030/sdk/platform-tools/adb /usr/bin
Code:
ln -s /opt/android-sdk-linux-x86_64-20131030/sdk/platform-tools/fastboot /usr/bin
We are ready to begin working on the device! first start the adb server and look for your device.
Code:
adb start-server
Code:
adb devices
You will then need to confirm the connection on your tablet screen to allow access from your computer.
Okay, wev'e got this first part set up. it's time to begin working on a kernel!
Lets get started.
I want to extract and build my zimage in $userspace, so open a terminal from /home and:
Code:
mkdir ~/android
Download the source package LG-V510(G-Pad 8.3 Google Play Edition)_Android_KK_V510_11c from here :
https://www.lg.com/global/support/opensource/opensourceList?types=ALL&search=lgv510
and open it to find three folders, including a kernel folder. Move the kernel folder to ~/android and then:
Code:
cd ~/android
Download the current eabi-4.6 Google tool chain to ~/android to cross compile your android kernel:
Code:
git clone https://android.googlesource.com/platform/prebuilts/gcc/linux-x86/arm/arm-eabi-4.8
When it completes, enter ~/android/kernel and get ready to compile a new kernel from the source code.
Code:
cd ~/android/kernel
Do the following each time you compile another kernel. This insures the correct path.
Code:
export PATH=$PATH:~/android/arm-eabi-4.8/bin
Code:
arm-eabi-gcc --version
you should get:
Code:
arm-eabi-gcc (GCC) 4.6.x-google 20120106 (prerelease)
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Continue on! we are not done yet!
Code:
export ARCH=arm
Code:
export SUBARCH=arm
Code:
export CROSS_COMPILE=arm-eabi-
Code:
export KERNEL_DEFCONFIG=palman_defconfig
Code:
make clean
Code:
make palman_defconfig
Doing the above prepares your kernel build environment, while the following code opens a interface to configure the kernel. You can simplify this later however you wish.
But for now,
Code:
make menuconfig
At this point make whatever changes you wish to the config file. for a list of the changes I have made, and that are in the kernel available to download, look in the sleekai kernel thread. (At start of thread, or in my signature).
After saving your changes,
Code:
make
Or conversely
Code:
make -o2
which will optimize the make. I recommend using simply "make" first, as the other may not properly show errors should any occur.
and go make a pot of coffee, and probably drink the whole pot! This will take a while.
At the end you will see that the "zimage is ready"
If you have errors, then you probably have dependency problems. If not, Yay! You compiled your first kernel, but we are not done yet!
The zimage you just produced is stored in /kernel/arch/arm/boot/zImage
To put both the zimage and any modules into a separate folder inside of ~/android so as to make extracting them easier:
Code:
mkdir ~/android/kernel_output
Code:
cp ~/android/kernel/arch/arm/boot/zImage ~/android/kernel_output/zImage
Code:
find ~/android/kernel -name "*.ko" -exec cp {} ~/android/kernel_output/ \;
The above code will find all the modules for your kernel. We don't need them for this tutorial, but it still is mighty handy!
Extract your boot image (boot.emmc.win) for the ramdisk You may also download the stock.zip from the sleekai kernel thread
Now make a backup to transfer to your computer.
Reboot to recovery on your tablet. I'm using TWRP. If you are using something else it should be just as easy.
Code:
adb reboot recovery
Only tick the boot
make a backup to your sd card. I changed the name to boot.bac to keep it simple
reboot
make sure the backup of boot is present using a file explorer. I am using ES File explorer.
On your computer, pull the file using adb
Code:
adb start-server
Code:
adb devices
Code:
adb pull /storage/sdcard1/TWRP/BACKUPS/LG0000606708987/boot.bac /home/sleek
sleek is my user name, replace with yours or use tilde.
What we are after is the "boot.emmc.win" file. We will only need this and the zImage to compile a new boot image and run it on your tablet.
The tools to extract the kernel and ramdisk from the boot.emmc.win you will need the following boot image tools installed on your computer.
So, again, lets keep this simple. All the tools are forked to my github for ease of use.
So lets install the tools! Ready?
As Root:
Code:
mkdir /usr/src/android
Code:
mkdir /usr/src/android/boot
Code:
cd /usr/src/android/
Code:
git clone https://github.com/sleekmason/bootimg-tools.git
Code:
cd bootimg-tools/libmincrypt/
Code:
gcc -c *.c -I../include
Code:
ar rcs libmincrypt.a *.o
Code:
cd ../mkbootimg
Code:
gcc mkbootimg.c -o mkbootimg -I../include ../libmincrypt/libmincrypt.a
Code:
cp mkbootimg /usr/local/bin/
Code:
cd ../cpio
Code:
gcc mkbootfs.c -o mkbootfs -I../include
Code:
cp mkbootfs /usr/local/bin/
Code:
cd /usr/src/android/bootimg-tools/mkbootimg/
Code:
wget https://raw.github.com/sleekmason/bootimg-tools/master/mkbootimg/unmkbootimg.c
Code:
gcc -o unmkbootimg unmkbootimg.c
Code:
cp unmkbootimg /usr/local/bin/
Now everything is in place to make a new boot image for your tablet!
Finishing this up is easy.
As root, we made a directory in /usr/src/android/boot for your boot.emmc.win file to be torn apart:
Code:
cd /usr/src/android/boot
Copy your new zImage and the boot.emmc.win file you extracted from your device.
Note* "/home/sleek" is the path on my computer, and should be changed to reflect yours!
Code:
cp /home/sleek/android/kernel_output/zImage /usr/src/android/boot
Code:
cp /home/sleek/boot.emmc.win /usr/src/android/boot
Now unpack the boot.emmc.win file to get the ram disk
Code:
unmkbootimg -i boot.emmc.win
Now you may remove the current boot.emmc.win file, and the resultant kernel file as we will be making new ones, and rename the zImage file you moved here to "kernel".
Code:
rm boot.emmc.win kernel && mv zImage kernel
Now repack using the command given to you during the unpack:
Code:
mkbootimg --base 0 --pagesize 2048 --kernel_offset 0x80208000 --ramdisk_offset 0x82200000 --second_offset 0x81100000 --tags_offset 0x80200100 --cmdline 'console=ttyHSL0,115200,n8 androidboot.hardware=palman lpj=67677 vmalloc=300M' --kernel kernel --ramdisk ramdisk.cpio.gz -o boot.emmc.win
Note* For 500 users this may be different. Simply use the command from the prompt.
You should now have a brand new boot.emmc.win image in /usr/src/android/boot!!
To push back on your device to test
Code:
adb reboot bootloader
Code:
fastboot boot boot.emmc.win
USING the above will only put your kernel build into memory and should not hurt your device if something goes wrong. Use the command below to make it permanent.
If everything works well, you should see the change you made to the /general/perf-localversion/ in your settings under kernel. from there it's up to you to hack away! make new and unique kernels!
If you want your kernel to survive reboot do;
Code:
fastboot flash boot boot.emmc.win
then:
Code:
fastboot reboot
You can expect a slow bootup on the first go around as your new kernel populates the widgets, etc..
NOTE*For the use of the latest eabi-4.7 google toolchain, you will need the libglibc libraries from the "testing" branch as gcc 4.7 is in testing. I advise completing the guide with eabi 4.6 first before trying 4.7.
The gamma correction though enabled in 4.6, isn't near as good as the native compile using 4.7. If you want the screen to look like it does in my kernels, you will need 4.7
For the eabi-4.7:
Code:
git clone https://android.googlesource.com/platform/prebuilts/gcc/linux-x86/arm/arm-eabi-4.7
That's it! Good luck! Remember, If you post a kernel you have made, you will need to show your kernel source, etc . . . Git hub is a good choice to keep track of changes you make. Best regards, Sleekmason
If you are a v500 user and want to build your own kernel!
First, read the above post as you will be following the steps listed there.​
There are just a couple of changes that you will need to do, and maybe a riddle to figure out as well. Read on.
You will need to download the v500 source from here: https://www.lg.com/global/support/opensource/opensourceList?superOsCategoryId=CAT00000001&osCategoryId=
Look for the LGV500 kernel source.
Where it says "palman" for the defconfig items, you will want to replace that with the defconfig for the 500, so replace palman with awifi-perf,
like this:
Code:
export KERNEL_DEFCONFIG=awifi-perf_defconfig
Code:
make awifi-perf_defconfig
Important
Follow the guide and build with the Google Toolchain eabi4.6 first
LG compiled for the 500 and 510 using the eabi4.6. It works, and will give you a feel for the process, and allow you to use your kernel.
Note*
I use the google toolchain eabi-4.7 for the sleekai kernels as it changes the gamma to reasonable defaults on the 510 without further tweaking. After compiling a kernel or two to get a feel for it, you should try using the 4.7 toolchain. To do so, you will probably need the libglibc libraries from the "testing" branch. Look it up.
caveat: I recieved a compile error for the v500 when I used the eabi-4.7 . . . . . yeah. You'll have to work that out.
There is a modified anykernel script for emmc devices out there (Search Google or here in xda). You will have to use the anykernel script after making your boot.emmc.win image as fastboot won't work on the 500. There may be another way .... But I don't know what it is.
Edit* There are now two different kernels for the LG GPad 8.3 V500(awifi) located in the development section of the forum.
Best of luck! -sleekmason
Can this be used to create a kernel for the non Google Play Edition Gpad to be able to allow us to install the Google Play edition ROM on it
Sent from my SM-N900W8 using Tapatalk
Canadoc said:
Can this be used to create a kernel for the non Google Play Edition Gpad to be able to allow us to install the Google Play edition ROM on it
Sent from my SM-N900W8 using Tapatalk
Click to expand...
Click to collapse
I would think so. I edited the above to show how to put the image back on your device. You should be able to use any source you wish to compile with. My thoughts are that you might wish to examine the differences in the ram disk if any.
sleekmason said:
Howdy, I would like to share how to download the kernel source for the gpe, compile a new custom kernel, and insert into your LG gpad GPE 510.
...
Click to expand...
Click to collapse
Thanks for the guide. Making GPE kernel was my next step in trying to get the GPE ROM to work on v510.
I just made guide for getting your Android build environment going if you want to use it on your blog or where ever.
http://forum.xda-developers.com/showthread.php?t=2629008
The problem with v500 is that it does not have fastboot so we can not flash kernel like how you can on v510.
@ AndroidUser00110001 Hi! I know that somebody tweaked the Any kernel to work on emmc devices... Maybe it could be adapted? Actually getting the menuconfig and make should be the same process as well as repacking the image. I take it just getting it back on the 500 device is the problem?
I will add your link to this post for setting up a build environment if that is okay.
sleekmason said:
@ AndroidUser00110001 Hi! I know that somebody tweaked the Any kernel to work on emmc devices... Maybe it could be adapted? Actually getting the menuconfig and make should be the same process as well as repacking the image. I take it just getting it back on the 500 device is the problem?
I will add your link to this post for setting up a build environment if that is okay.
Click to expand...
Click to collapse
Is that the koush any kernel? I was going to mess with that too. I just need a small break now. Took a few days to get new system exactly how I want it.
Go ahead and use guide...mo problem at all.
AndroidUser00110001 said:
Is that the koush any kernel? I was going to mess with that too. I just need a small break now. Took a few days to get new system exactly how I want it.
Go ahead and use guide...mo problem at all.
Click to expand...
Click to collapse
Yes, from here: http://forum.xda-developers.com/showthread.php?t=847265
I noted that boot was on block nncblk0p21 on our device, and not 22? better double check that. I tried it Anykernel as well to no avail when getting this set up. Fastboot is Awesome!
It's taxing to get it set up right. Seems like things change very often for the dependencies based on other package changes. I ussually go with testing but redid two partitions with stable. The 32 bit is just going to sit there, which seems kinda silly due to the need for extra packages in 64 to compile for 32 but whatever. Yeah.
AndroidUser00110001 said:
Thanks for the guide. Making GPE kernel was my next step in trying to get the GPE ROM to work on v510.
I just made guide for getting your Android build environment going if you want to use it on your blog or where ever.
http://forum.xda-developers.com/showthread.php?t=2629008
The problem with v500 is that it does not have fastboot so we can not flash kernel like how you can on v510.
Click to expand...
Click to collapse
I don't understand, what are the differences bettween the v500 and v510? they both have the same hardware, but not the same boot partition or something like that?
ayziaa said:
I don't understand, what are the differences bettween the v500 and v510? they both have the same hardware, but not the same boot partition or something like that?
Click to expand...
Click to collapse
The boot on the 500 cannot be fully unlocked.
This is not the appropriate place to ask that kind of question should be asked in general or in troubleshooting. Also, there are already many threads about this same question please use the search utility to find them. Thank you.
i was thinking of writing a tutorial about this as well for the v500 but this better than i would have done Well done...
sleekmason said:
Yes, from here: http://forum.xda-developers.com/showthread.php?t=847265
I noted that boot was on block nncblk0p21 on our device, and not 22? better double check that. I tried it Anykernel as well to no avail when getting this set up. Fastboot is Awesome!
It's taxing to get it set up right. Seems like things change very often for the dependencies based on other package changes. I ussually go with testing but redid two partitions with stable. The 32 bit is just going to sit there, which seems kinda silly due to the need for extra packages in 64 to compile for 32 but whatever. Yeah.
Click to expand...
Click to collapse
Another tool that i ported to the lg g pad a bit back along with loki-doki...
Quick hint, dont bother with direct mmc naming as qcom (i dont know if the other chip makers do the same thing, as i have only had qcom devices) has given us a simple naming scheme...
should only be used by people who know how to use this,
darkassain said:
i was thinking of writing a tutorial about this as well for the v500 but this better than i would have done Well done...
Another tool that i ported to the lg g pad a bit back along with loki-doki...
Quick hint, dont bother with direct mmc naming as qcom (i dont know if the other chip makers do the same thing, as i have only had qcom devices) has given us a simple naming scheme...
should only be used by people who know how to use this,
Click to expand...
Click to collapse
Thank you! Have you successfully used your script to push a kernel onto the 500 Or 510?
I would think this could be very handy for sharing a custom kernel for the 510, but would like to see somebody report a positive test result. Very cool!
sleekmason said:
Thank you! Have you successfully used your script to push a kernel onto the 500 Or 510?
I would think this could be very handy for sharing a custom kernel for the 510, but would like to see somebody report a positive test result. Very cool!
Click to expand...
Click to collapse
yes back before when there wasnt a overclocked kernel i basically used this to push it when i would compile just the kernel (didnt maintain so i now use dyn's)...
yes this is only for the v500 as this has the extra loki step, but it shouldnt be hard to modify so it does not do that extra step
darkassain said:
i was thinking of writing a tutorial about this as well for the v500 but this better than i would have done Well done...
Another tool that i ported to the lg g pad a bit back along with loki-doki...
Quick hint, dont bother with direct mmc naming as qcom (i dont know if the other chip makers do the same thing, as i have only had qcom devices) has given us a simple naming scheme...
should only be used by people who know how to use this,
Click to expand...
Click to collapse
Hi, can you just use a generic anykernel updater script too?
For example to flash a packed boot.img
Code:
run_program("/tmp/busybox", "dd", "if=/dev/block/platform/msm_sdcc.1/by-name/boot", "of=/tmp/boot.img");
run_program("/tmp/unpackbootimg", "-i", "/tmp/boot.img", "-o", "/tmp/");
run_program("/tmp/repack-ramdisk.sh");
run_program("/tmp/mkbootimg.sh");
run_program("/tmp/busybox", "dd", "if=/tmp/newboot.img", "of=/dev/block/platform/msm_sdcc.1/by-name/boot");
mako and flo can do like this.. I think HTC One as well, since they are all similar qcom chipsets maybe this device can too
poondog said:
Hi, can you just use a generic anykernel updater script too?
For example to flash a packed boot.img
Code:
run_program("/tmp/busybox", "dd", "if=/dev/block/platform/msm_sdcc.1/by-name/boot", "of=/tmp/boot.img");
run_program("/tmp/unpackbootimg", "-i", "/tmp/boot.img", "-o", "/tmp/");
run_program("/tmp/repack-ramdisk.sh");
run_program("/tmp/mkbootimg.sh");
run_program("/tmp/busybox", "dd", "if=/tmp/newboot.img", "of=/dev/block/platform/msm_sdcc.1/by-name/boot");
mako and flo can do like this.. I think HTC One as well, since they are all similar qcom chipsets maybe this device can too
Click to expand...
Click to collapse
thanks for reminding me the any kernel uploaded by me won't work as it doesn't parse Loki images xorrectly, I'll upload the correct one once I have access to my pc
darkassain said:
thanks for reminding me the any kernel uploaded by me won't work as it doesn't parse Loki images xorrectly, I'll upload the correct one once I have access to my pc
Click to expand...
Click to collapse
could you please re-post to a different thread rather than hijacking this thread, as your script does not work with the 510 currently and I do not want to go to get confused with my kernel how to. what started out to maybe become relevant apparently will not and so shouldn't be confused with what I'm doing here. I will be happy to try working with your script if you would open up an appropriate thread. Thank you.
Installed kenel and booted. Now to install trickster mod and fix the dang gamma.
gunnyman said:
Installed kenel and booted. Now to install trickster mod and fix the dang gamma.
Click to expand...
Click to collapse
Excellent!! Pleased to know that you are able to use it. Have you changed your gamma settings?
I did on mine and am pleased with the result. I'm using 248, 252, 255 using trickster mod What are you going with?
sleekmason said:
Excellent!! Pleased to know that you are able to use it. Have you changed your gamma settings?
I did on mine and am pleased with the result. I'm using 248, 252, 255 using trickster mod What are you going with?
Click to expand...
Click to collapse
havent messed around too much.
I had a thought about this and I think it would be awesome if we could incorporate faux123's bits for gamma and color control. His fauxcontrol offers much more granular control than trickster.
I'm thankful to have what we have, and THANK YOU for sharing it, but like any good geek I WANTS MOAR!!!!!
gunnyman said:
havent messed around too much.
I had a thought about this and I think it would be awesome if we could incorporate faux123's bits for gamma and color control. His fauxcontrol offers much more granular control than trickster.
I'm thankful to have what we have, and THANK YOU for sharing it, but like any good geek I WANTS MOAR!!!!!
Click to expand...
Click to collapse
me too! I'll look into it. There are other apps besides trickster to give you more control. I think at the kernel level everything we need is unlocked. And yeah, he knows his business like nobody else eh? I'm just persistent.

Categories

Resources