Hi all,
I did a bad work with my galaxy tab. I've flashed it with a new ROM but this ROM is not working correctly, I can't see correctly my display probably due to a bad driver inside the build. My problem is that I've no more a working ROM on my galaxytab and I can't reflash it.
USB seems not working correctly, so device is powered on but I can't access to it from Windows.
Is there a way to to upload a file to internal storage in recovery mode or download mode?
Thanks
Stefano
Stefano,
Depends what recovery you have as recovery...stock recovery no you can't, clockwork recovery yes you can. From download you can use Odin.
What model Tab do you have? Wifi, 3G? What version firmware were you on before the problem and what do you want to restore to?
Ciao
Hi, yes I've Clockwork installed but how I can 'upload' a file using Odin? The standard guide shows that Odin3 is used only to upload a .tar.md5 file to root the phone....
Thanks
Ste
stemilano said:
Hi, yes I've Clockwork installed but how I can 'upload' a file using Odin? The standard guide shows that Odin3 is used only to upload a .tar.md5 file to root the phone....
Thanks
Ste
Click to expand...
Click to collapse
That's why i asked what sort of tab you have and what you want to flash your tab to..
There are odin files available to go back to 3.0.1, to go to Early Touchwiz, both for Wifi only tabs...if you are really stuck it is often beneficial to go all the way back to 3.0.1 then go in whatever direction you like.
Or, if the tab is sort of working even tho the display is corrupt you might be able to connect and use adb to push a rom to the sdcard and then flash from clockwork. More info Stefano, what have you got by way of tab, and where do you want to get to?
Download the samsung drivers on your computer . Then install android sdk so you can use the adb if you haven't already.Then you can adb to push a rom to your device and flash.
I'll try ASAP...I'll also add ROM and device details.
I've a Samsung Galaxy TAB 10.1 GT-P7500
Problem is with ROM: [ROM][CWM][EUR][3G] BroodComb G-P7500 XWKG9 [ALPHA]
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to General
Related
Hi, I've been looking around on here because the app 'ROM Manager' told me to look on here for help. I haven't found any tutorials for my model of phone. Its a Samsung Galaxy 5. Please could somebody provide a simple tutorial/explaination of how to 'flash a Clockwork compatible kernel first' so that i can use ROM Manager to backup my stock ROM
Thanks!
Jordanooo said:
Hi, I've been looking around on here because the app 'ROM Manager' told me to look on here for help. I haven't found any tutorials for my model of phone. Its a Samsung Galaxy 5. Please could somebody provide a simple tutorial/explaination of how to 'flash a Clockwork compatible kernel first' so that i can use ROM Manager to backup my stock ROM
Thanks!
Click to expand...
Click to collapse
Me also waiting for dat +1 ..... pls sum1 work on it
Sent from my Galaxy5 using XDA Premium App
I am searching dilligently..
So far I have not come across the particular thread either. There is a lot about making kernels but not the where to or how of for the samsung phone to become compatible with rom manager. Will find and post asap. Keep Moving Forward
I think I found it, hope this is the one. Have a great one.
http://forum.xda-developers.com/showthread.php?t=788108
downloaded rom manager premium..... opend it... tapped on download roms... my phone (galaxy 5) isnt listed der... plz help...
eldunari said:
downloaded rom manager premium..... opend it... tapped on download roms... my phone (galaxy 5) isnt listed der... plz help...
Click to expand...
Click to collapse
our phone isnt supported with rom manager yet, there is clockworkmod for our phone though but you need to install it through odin
Download Odin 4.28 and the ClockworkMod file, and flash your phone to CWM that way, it works- thats how i got my phone running CM7.1.
Download Odin 4.28 and the ClockworkMod file, and flash your phone to CWM that way, it works- thats how i got my phone running CM7.1.
Links would be helpful, thanks
skunkwerx said:
Download Odin 4.28 and the ClockworkMod file, and flash your phone to CWM that way, it works- thats how i got my phone running CM7.1.
Links would be helpful, thanks
Click to expand...
Click to collapse
No need for links. Clockworkmod Recovery is now officially available through ROM Manager.
Solved (for me)
I also have a Samsung GT I5500 (Galaxy 5, Europa)
So, as I see, Rom Manager free isn't available for Android 2.1 (that's the version I had).
Although, Clockwork recovery can be installed using Odin, but to start the phone in "recovery" mode it's needed to do it trough the console in the computer, using the developer tools (with adb) ...or, use it just after it's installed.
After installing that recovery image it's automatically started, for the first time.
But you can use it to install another newer and better ROM, that can be compatible with ROM Manager. I installed CyanogenMod 7.
First you have to "root" your phone, here is how I did it:
http://forum.xda-developers.com/showthread.php?p=19576527#post19576527
To install something using Odin use this post (about installing ClockworkMod Recovery and CyanogenMod 7), it's newbie-friendly:
http://forum.xda-developers.com/showthread.php?t=1416190
But I recommend using the files from this post (are the latest 7 January 2012):
http://forum.xda-developers.com/showthread.php?t=1149110&highlight=mad2sd
And, as in that last post says, be sure to install the "Baseband", without that I got a boot cycle:
http://www.madteam.co/forum/development/basebands/
Oook... it seems i'm not allowed to post into Development session due to my low number of post, so as suggested by VBullettin i'm posting into Q&A....
Really need your help guys.
I've played a bit today with my GT 10.1 3G and i ended up installing Bonsai ROM.
First boot ok, i setup all the stuff and rebooted.
Second boot, bootloop.
Then the tragedy.... i probably did something wrong and so actually this is my situation:
CWM 4.0.0.4 correctly accessible
all the partitions have been formatted
i'm unable to push any custom rom to the phone using adb as it seems that /sdcard, which actually is a link to /data/media, cannot be mounted properly by CWM or something similar
Even tried a factory restore through ODIN but when i enter downloading mode ODIN does not recognize the device and i see a usb drivers errors in WIN7. (drivers are installed correctly, i was able to use ODIN at the beginning).
Any hint?
I'd be happy both being able to install a custom MOD or even a factory restore, i just want to stay away from completely bricking the device - and it seems i'm not that far....
thanks in advance to anyone,
Cris
CWM 4.0.0.4 correctly accessible! Thats good news,all isn't lost.
1)Restore from a backup you created.
2)Try the touchwiz ROM quite popular in development forum and flash with odin actually for GT 10.1 3G
3) To push a custom rom into the device (why?) follow the steps, incase its update.zip
Now in CWM xxx recovery mode connect it to your pc,
STARt>run>cmd> direct to the adb containing pathway like:
C:\ cd Program Files\Android\android-sdk\platform-tools\(type)adb devices
Hopefully your device will be detected,
Now push the restore.img (in case you backed up)
or anything into the sdcard( the push file should be in adb.exe folder) via PC:
adb start-server
adb push xxx.zip /sdcard/
4)Factory restore should be attempted from recovery mode, there is specifically an option for this plus dalvik cache clear all cache clear;NOT ODIN
Seriously bro its time to flash a factory ROM be it 3.0 or 3.1 if available via ODIN. I won't recommend flashing any custom ROM now.
Thanks man.
I was finally able to flash via ODIN HC 3.1.
The only minor issue is that is a P7510 version, so the mobile network 3g is not working. Minor issue as i didn't buy a SIM for data traffic yet.
Still, if anyone could point me to a ODIN compatible ROM for 7500, i'd be grateful.
REPEATING:
Try the touchwiz ROM quite popular in development forum and flash with odin actually for GT 10.1 3G
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1162302
PROOF: (quoted by Original Poster)
Current Issues:
Because this rom is for the 3G version of the device there are some issues with apps..
Click to expand...
Click to collapse
mughalgxt said:
REPEATING:
http://forum.xda-developers.com/showthread.php?t=1162302
PROOF: (quoted by Original Poster)
Click to expand...
Click to collapse
oops
sorry for that, got to pay more attention when reading kind and useful replies as yours.
Thanks again
hi im having trouble getting CWM to work on my Rogers (GT-P7500R) WIFI+4G to accept CWM, I have trying to flash it and it sends my galaxy tab into a boot crash...I had to to restore it to stock kernel with ODIN 1.85 which worked fine, but still on the stupid default recovery (I HATE IT). as soon as I try and flash it with the CWM it simply turns off the tablet and then when I power on again, it shows the samsung galaxy tab logo for a second and then turns off again, then i use odin to flash stock and it works normal again, no data lost at all...any help plz, cause without CWM im pretty sure i cannot do other stuff like custom rom, kernels, overclocking...HELP!!!!!!!!!! im pretty sure this has a signed only bootloader right?? thats why i need something other then 3e recovery to be able to flash stuff
FIXED!!!!
so see below
Good work
Keep us posted! I pick mine up tonight and will be following your foot steps haha thanks for the info so far.
Hi,
so here is how to get clockworkmod on the samsung galaxy tab 10.1 (GT-P7500R)...I looked around XDA for hours before finding some useful info...here it is:
Step 1
download these files:
http://www.4shared.com/file/KbSJhFtI/recovery-cwm_4004-sam-tab-101t.html
and
http://www.4shared.com/rar/74D8ERjO/Odin_v185.html
Step 2
extract the odin zip file and run odin, by right clicking first and say run as administrator...reboot the phone into download mode (ask me if u do not know how , there will be a warning and then a screen with some text in the upper left, connect you device to the usb, and back in odin select the bootloader check box and click browse to the right and select the other recovery-cwm file u downloaded and click start, it should take a short time and you will see a progress bar on the screen...viola, you will have clockworkmod
OPTIONAL: if you want to root it at this time, just follow below:
Download this file:
http://www.4shared.com/zip/cVgtnw_t/Galaxy_root.html
Step 3
put the file in root of the device and reboot into recovery mode (ask me if u do not know how and select update from zip and select the file, then its done and done.
OPTIONAL: if you want to put a custom kernal on, so that you can overclock it to 1.4 ghz, like I have then follow below...it worked and works fine for me
Download this file:
http://www.4shared.com/zip/vWdGcQcr/boot-cm_26364_p4_ux_hc32-oc-xt.html
and follow from step 3 again.
PS: I also have a stock kernal for the rogers edition of the galaxy tab if needed, if u mess it up in the future
Overcome has a good working version of cwm and custom rom that install easily on the Rogers Tab -- the OC kernel by Pershoot works fine. The custom rom by Genbarou also installs well.
Im also on XDA on my tab too...
Sent from my GT-P7500R using xda premium
Help.. XDA'er In Need...
theandroidnerd said:
Hi,
so here is how to get clockworkmod on the samsung galaxy tab 10.1 (GT-P7500R)...I looked around XDA for hours before finding some useful info...here it is:
Step 1
download these files:
http://www.4shared.com/file/KbSJhFtI/recovery-cwm_4004-sam-tab-101t.html
and
http://www.4shared.com/rar/74D8ERjO/Odin_v185.html
Step 2
extract the odin zip file and run odin, by right clicking first and say run as administrator...reboot the phone into download mode (ask me if u do not know how , there will be a warning and then a screen with some text in the upper left, connect you device to the usb, and back in odin select the bootloader check box and click browse to the right and select the other recovery-cwm file u downloaded and click start, it should take a short time and you will see a progress bar on the screen...viola, you will have clockworkmod
OPTIONAL: if you want to root it at this time, just follow below:
Download this file:
http://www.4shared.com/zip/cVgtnw_t/Galaxy_root.html
Step 3
put the file in root of the device and reboot into recovery mode (ask me if u do not know how and select update from zip and select the file, then its done and done.
OPTIONAL: if you want to put a custom kernal on, so that you can overclock it to 1.4 ghz, like I have then follow below...it worked and works fine for me
Download this file:
http://www.4shared.com/zip/vWdGcQcr/boot-cm_26364_p4_ux_hc32-oc-xt.html
and follow from step 3 again.
PS: I also have a stock kernal for the rogers edition of the galaxy tab if needed, if u mess it up in the future
Click to expand...
Click to collapse
I was able to load the CWM Recovery onto my Rogers 4G Tab, however I flashed with the files from here initially:
http://forum.xda-developers.com/showthread.php?t=1171089
using the 4G Recovery and Kernel files. This created nothing but boot loop. I was then able to use the CWM file from this post and get CWM to boot however that is all I can do at this time.
I cannot get the device to connect to PC for usb storage (to potentially load a bootable rom) while in CWM as it says "unable to open ums lunefile (no such file or directory).
I believe the kernel.zip file from the other post has messed up my device. Does anyone have a Stock Rogers Kernel, or custom that is flashable via ODIN so I can at least get back to Android OS and load a Rom via USB?
Also can someone repost the Galaxy_root.zip file. I cant download from 4shared. Keeps timing out to file not found. THANKs
macknup said:
I was able to load the CWM Recovery onto my Rogers 4G Tab, however I flashed with the files from here initially:
http://forum.xda-developers.com/showthread.php?t=1171089
using the 4G Recovery and Kernel files. This created nothing but boot loop. I was then able to use the CWM file from this post and get CWM to boot however that is all I can do at this time.
I cannot get the device to connect to PC for usb storage (to potentially load a bootable rom) while in CWM as it says "unable to open ums lunefile (no such file or directory).
I believe the kernel.zip file from the other post has messed up my device. Does anyone have a Stock Rogers Kernel, or custom that is flashable via ODIN so I can at least get back to Android OS and load a Rom via USB?
Also can someone repost the Galaxy_root.zip file. I cant download from 4shared. Keeps timing out to file not found. THANKs
Click to expand...
Click to collapse
I dont know if this will help but you need to know that its not a 4G, its actually 3G+ so if you want to root, dont use the 4G method
I installed the cwm without any problem by following this thread:
http://forum.xda-developers.com/showthread.php?t=1171089
and by following this :
RETAIL 3G
[GTP7500]
1. Download this Root.zip file to your tablet and move it to root directory of tablet storage. (you can also download on comp. then transfer to tablet)
2. Reboot tab and go into recovery mode and apply the root.zip you just downloaded.
3. Then reboot
rooted already
For CWM
1. After rooting download and install Rom Manager from market.
2. open Rom Manager app and have it install clockwork Mod to your device, you should see your device listed within Rom manager.
3. Done.
I was unable to even get the device to recognize by PC. I could not load any zip files. Luckily I found a P7105 fille ODIN file that I was able to load. however it is a WIFI ONLY version I have. However it has enabled me to boot back to android and load files via usb. I am going to try OVERCOME 10.1 and hope that applies the necessary root as well as 3G access.
will report back
macknup said:
I was unable to even get the device to recognize by PC. I could not load any zip files. Luckily I found a P7105 fille ODIN file that I was able to load. however it is a WIFI ONLY version I have. However it has enabled me to boot back to android and load files via usb. I am going to try OVERCOME 10.1 and hope that applies the necessary root as well as 3G access.
will report back
Click to expand...
Click to collapse
Can confirm. Installing CWM then flashing Overcome FULL did wonders. Back up and running. 3.2 android and 3G+ service active.
WAAAHHOOOO! XDA to the rescue!
Some rom?
Hello, thanks for the tutorial, I'm from Venezuela and I have a 7500R if anyone needs Spanish translation let me know. Will you have some rom recommended for a 7500R
Sorry for my English.
I want to confirm that rooting method post here work great.
(This is the only part you need)
RETAIL 3G
[GTP7500]
1. Download this Root.zip file to your tablet and move it to root directory of tablet storage. (you can also download on comp. then transfer to tablet)
2. Reboot tab and go into recovery mode and apply the root.zip you just downloaded.
3. Then reboot
Note 1: The downloaded file is not named Root.zip. You can of course rename it yourself.
Note 2: To enter recovery mode, after you use vol- to highlight the recovery icon, power button didn't seem to work in selecting it. But you just wait for a min, it'll work.
Note 3: It only takes seconds to load and run the Root.zip. Then you are good to reboot, and it's done.
------
My GT10.1 -
Rogers GT-P7500R
Android 3.2 P7500RUXKK2 (stock; now rooted)
GT-P7500R
i need to go back to stock os i find some that say stock but when i go into my STATUS my IMEI is UNKNOW IMEI SV is UNKNOW the sim card not reading please help
Hey guys
Well im new to this page and i have a galaxy player 5.0. Im have succesfully rooted it but i have trouble flashing a custom recovery.
I have downloaded ROM manager but when it asks for my phone model im cant find it on the list. I have chosen Galaxy S 4G because i thought it was closer to this model.
Im sorry if there was a answer out there and didnt find it but i have some trouble finding stuff with the search function and cat understand some terms that are used by more experienced people
Sorry for my english its not my native language
Thanks in advance
You don't actually have to have ROM manager to flash stuff, bit you DO need a kernel with cwm. Get the one appropriate for your device (us or international). Then reboot into recovery (hold down power + up or use an app) and install your zip from there.
Hope that helps!
Sent from my YP-G70
Thanks, But where can i find a kernel for my device and now if its US or international, and what is it?
Mine is the international version
Just search this:
[KERNEL][CWM][OC&UV] rj's custom kernel for Galaxy Player 5.0 INTL (YP-G70) r14
Download the appropriate software (Odin, kies, drivers.) and follow the directions carefully.
Don't use rom manager.
Thanks. I downloaded the Kernel. It has 2 files in it. One is called zImage and the other one is a folder called META.INF
As i have understanded in the instructions i should open Odin3 and and select PDA and select a file but i dont know wich. and when i open and browse to the folder where the 2 files are on i just find the folder called META.INF
Help Me please!!!
Rimusa said:
Thanks. I downloaded the Kernel. It has 2 files in it. One is called zImage and the other one is a folder called META.INF
As i have understanded in the instructions i should open Odin3 and and select PDA and select a file but i dont know wich. and when i open and browse to the folder where the 2 files are on i just find the folder called META.INF
Help Me please!!!
Click to expand...
Click to collapse
You have to flash the zimage under pda
I dont understand. Could you give me a step by step on how to do this??
1.download rj kernel r2
2. Put your device in download mode(device turned off hold down button and plug in USB cable immediately) you should see an android with yellow triangle
3.open odin 3
4.under PDA Choose rj kernel r2(zimage)
5.Press start in Odin
6. You have now successfully flashed your first kernel
OK thanks i flashed the kernel already
Now how do i acces CWM while in recovery mode?
Also i have also installed Gingerbread After installing my kernel. Does this mean my kernel has been erased??
Thanks in advance
Oh, I thought you already had gingerbread installed.
Well on the US YP-G70 to access CWM, while the device is off, hold the volume UP button + power button. Let go of power button when you see the samsung logo. Try it.
IF CWM recovery comes up you should still have the kernel because CWM comes with the kernel.
goodluck
No, I have just installed gingerbread using the same method as trying to install a kernel but out of curiosity.
My device is now on gingerbread 2.3.6 it is unrooted and doesnt have the kernel installed
How can i root gingerbread? superoneclick doesnt work and i triede Z4root and gingerbreak
And does the latest rj kernel have CWM installed?
Thanks in advance
Rimusa said:
Hey guys
Well im new to this page and i have a galaxy player 5.0. Im have succesfully rooted it but i have trouble flashing a custom recovery.
I have downloaded ROM manager but when it asks for my phone model im cant find it on the list. I have chosen Galaxy S 4G because i thought it was closer to this model.
Im sorry if there was a answer out there and didnt find it but i have some trouble finding stuff with the search function and cat understand some terms that are used by more experienced people
Sorry for my english its not my native language
Thanks in advance
Click to expand...
Click to collapse
Do not flash a incorrect recovery, at best you will softbrick.
Most of the time- you loose your device.
Q&A for [GUIDE] How to Root the Samsung Galaxy Tab 10.1 [Video Walkthrough]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [GUIDE] How to Root the Samsung Galaxy Tab 10.1 [Video Walkthrough]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Can't root my tab, Heimdall can't find "RECOVERY"
Help, I'm trying to root my GAlaxy Tab 10.1 WiFi. First of all, the ODIN program and Heimdall GUI ask for gz.tar files, but all the recovery files I download are .img files....?? Well I'm trying to put TWRP on my Tab through Heimdall command line (I'm on Linux), but I get this error:
Code:
ERROR: Partition "RECOVERY" does not exist in the specified PIT.
I have tried typing RECOVERY both in upper cases and lower cases.
After this, the device just reboots into stock ROM.
The command I am using is
Code:
sudo heimdall flash --RECOVERY recovery.img --no-reboot
Any ideas?
I'm not familiar with Heimdall, so if possible try to use Odin. Go to http://droidbasement.com/db-blog/?p=3158 and download the recovery.tar.md5 for your tab version, launch Odin, connect your tab, select PDA and choose the recovery.tar.md5 file and flash. And then you can flash the twrp zip file from AAcount's Omni ROM thread through recovery. To root, the easiest and most updated way is to simply flash the SuperSU zip from recovery. http://download.chainfire.eu/supersu
Sent from my GT-P7500 using Tapatalk
Where's Link
Where is the download link?
Guys
Urgent help
I am trying to repair my friends galaxy 10.1 tab which she tried to root nd wasn't a success.
I tried flashing stock rom but it is stuck on Samsung logo
Initial boot loader was high on android
Tried wiping cache nd reset factory all done but gives efs error too
Restart nd stuck again
Plz help
Swapyyyyy said:
Guys
Urgent help
I am trying to repair my friends galaxy 10.1 tab which she tried to root nd wasn't a success.
I tried flashing stock rom but it is stuck on Samsung logo
Initial boot loader was high on android
Tried wiping cache nd reset factory all done but gives efs error too
Restart nd stuck again
Plz help
Click to expand...
Click to collapse
Are you sure it's a p7510/7500 galaxy tab?
Sent from my Nexus 7 using XDA Free mobile app
It's n8000 galaxy note
Swapyyyyy said:
It's n8000 galaxy note
Click to expand...
Click to collapse
Then you're in the wrong forum. If you ask your question in the right forum they will be able to help you.
Sent from my Z1 Compact
open links
I am having no luck opening links in the forum. Is it me, or my computer?
Shotweb said:
Help, I'm trying to root my GAlaxy Tab 10.1 WiFi. First of all, the ODIN program and Heimdall GUI ask for gz.tar files, but all the recovery files I download are .img files....?? Well I'm trying to put TWRP on my Tab through Heimdall command line (I'm on Linux), but I get this error:
Code:
ERROR: Partition "RECOVERY" does not exist in the specified PIT.
I have tried typing RECOVERY both in upper cases and lower cases.
After this, the device just reboots into stock ROM.
The command I am using is
Code:
sudo heimdall flash --RECOVERY recovery.img --no-reboot
Any ideas?[/QUOTE
Have you tried WINE..I use it in xubuntu 14.10 and run Odin in it
Click to expand...
Click to collapse
perfect instructions! Thanks!
perfect instructions! Thanks!
Looking for the downloads
I know this is old but do you have another location where I can find these downloads? I need a recovery file for my 10.1
thanks
Joe
Galaxy Tab 3 GT-P5210. Root links removed!
Why are the links removed? I want those links badly
Hello! Since everything here seams to be outdated I'm going to add my own little guide right here.
I tried to put this in the main thread, but was unable to.
This worked fine for me.
I Started with Stock Android ICS + stock recovery and ended up with rooted stock + ClockWorkMod recovery.
Rooting GT-P7500 (3G):
(I'm sure this works with whatever model you have.)
Downloads:
Odin3 v3.10.6:http://forum.xda-developers.com/showthread.php?t=2711451
ClockWorkMod:http://www.clockworkmod.com/rommanager
Caboomi's Recovery img2tar odin maker:http://forum.xda-developers.com/showthread.php?t=2281287
SuperSU:https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
Installation:
Put the UPDATE-SuperSU zip file on your tablets sdcard.
Convert your recovery image to odin flashable tar file with Caboomi's nifty script. (If you get any errors just read the thread.)
Make sure you have USB-drivers installed
Start Odin on your PC.
Go in to download mode on tablet.
Connect tablet to PC, click AP, choose your recovery tar file and flash.
Reboot in to your tablets new recovery.
Install the SuperSU application.
Press Thanks button.
Reboot, done!
Galaxy Tab 10.1 Root Guide by djR3Z
Hello,
I don't have a noob question, I just need the links updated in the "[GUIDE] How to Root the Samsung Galaxy Tab 10.1 [Video Walkthrough]" by djR3Z. I have a friend who has this tablet and still uses it so I need the links updated please. He has the Samsung Galaxy Tab 10.1 P7510 wifi only. I see dennyhhh has posted links but do they work for the Samsung Galaxy Tab 10.1 P7510 wifi only? Yea, he wants to update from the Android Honeycomb version, I dont blame him!!
Thank you.
Where can I find links, I need it.
Thanks!
Missing links
I feel like I'm overlooking the links...but I don't see them.
2017 update
Hi everyone, I just rooted my galaxy tab 10.1 wifi and it was difficult to find the files, hopefully I can help someone in trouble.
First of all, dennyhhh thanks a lot for the instructions, that was clear but unfortunately the clock work mode doesn't work that way now. So I'll cite what dennyhhh said:
Rooting GT-P7500 (3G):
(I'm sure this works with whatever model you have.)
Downloads:
Odin3 v3.10.6:http://forum.xda-developers.com/show....php?t=2711451
ClockWorkMod:http://www.clockworkmod.com/rommanager
Caboomi's Recovery img2tar odin maker:http://forum.xda-developers.com/show....php?t=2281287
SuperSU:https://download.chainfire.eu/696/Su...erSU-v2.46.zip
Installation:
Put the UPDATE-SuperSU zip file on your tablets sdcard.
Convert your recovery image to odin flashable tar file with Caboomi's nifty script. (If you get any errors just read the thread.)
Make sure you have USB-drivers installed
Start Odin on your PC.
Go in to download mode on tablet.
Connect tablet to PC, click AP, choose your recovery tar file and flash.
Reboot in to your tablets new recovery.
Install the SuperSU application.
Press Thanks button.
Reboot, done!
So it was not very clear to me how to use the Caboomis script so I ended up downloading the tar file that is mention on original post:
https://www.androidfilehost.com/?fid=529152257862684556
I also used a really old version of Odin, It was 1.3
Also, If you have troubles to get in the download mode you must press Power button + low volume button and when the galaxy logo shows, inmedialty let the power button go while still pressing the low volume button.
I guided myself with dennyhhh post and also the original post, the difference is that I installed the superSU instead of Samsung_Galaxy_Tab_10.1_root.zip on recovery mode.
That's all Fellas!!! By the way the clockrom is now an app you can download from the market after the root:good:
---------- Post added at 12:53 AM ---------- Previous post was at 12:49 AM ----------
2017 update
Hi everyone, I just rooted my galaxy tab 10.1 wifi and it was difficult to find the files, hopefully I can help someone in trouble.
First of all, dennyhhh thanks a lot for the instructions, that was clear but unfortunately the clock work mode doesn't work that way now. So I'll cite what dennyhhh said:
Rooting GT-P7500 (3G):
(I'm sure this works with whatever model you have.)
Downloads:
Odin3 v3.10.6:http://forum.xda-developers.com/show....php?t=2711451
ClockWorkMod:http://www.clockworkmod.com/rommanager
Caboomi's Recovery img2tar odin maker:http://forum.xda-developers.com/show....php?t=2281287
SuperSU:https://download.chainfire.eu/696/Su...erSU-v2.46.zip
Installation:
Put the UPDATE-SuperSU zip file on your tablets sdcard.
Convert your recovery image to odin flashable tar file with Caboomi's nifty script. (If you get any errors just read the thread.)
Make sure you have USB-drivers installed
Start Odin on your PC.
Go in to download mode on tablet.
Connect tablet to PC, click AP, choose your recovery tar file and flash.
Reboot in to your tablets new recovery.
Install the SuperSU application.
Press Thanks button.
Reboot, done!
So it was not very clear to me how to use the Caboomis script so I ended up downloading the tar file that is mention on original post:
https://www.androidfilehost.com/?fid=529152257862684556
I also used a really old version of Odin, It was 1.3
Also, If you have troubles to get in the download mode you must press Power button + low volume button and when the galaxy logo shows, inmedialty let the power button go while still pressing the low volume button.
I guided myself with dennyhhh post and also the original post, the difference is that I installed the superSU instead of Samsung_Galaxy_Tab_10.1_root.zip on recovery mode.
That's all Fellas!!! By the way the clockrom is now an app you can download from the market after the root