Can anyone tell me how to do this?
I maybe pulling this out of my ass but I think there are different profiles for headset vs. media audio. I have a pair of Nokia bluetooth headphones that function as both. When I pair it with the phone, it shows up as two devices. One as a headset and another as "media audio" so if you're device isn't designed for it, it may not work
and even if you get it to work, it will sound like crap with low bitrate mono audio
Stop pulling stuff out your ass! XD
Super bt mono froyo free.
I would post a link, but I can't seem to find the share button. It sounds like crap, but it works.
Sent from my PG86100 using XDA App
Related
I've spent many a frustrated hour trying to find a way to use my Bluetake I-Phono bluetooth headphones without that damn dongle and at long last, I've found a solution!
"Simply" install the WM2003SE upgrade by toenailed/xda2jojo (which is pretty bloomin impressive, BTW) and then install the HP iPAQ Bluetooth Stereo Headphones Driver Update.
This adds a "High Quality Audio setup" option to the Broadcom bluetooth implementation within the WM2003SE upgrade. Not quite A2DP but pretty damn close. Fidelity, volume, bass are pretty good, particularly considering its a wireless connection, but there are occasional "pops" and "squeaks" to contend with. The connection is so sensitive that I'm having to maintain line-of-sight between my XDAII and the right-hand (BT connected) side of the headphones. I can move several yards away but only as long as I keep the LOS, otherwise the connection degrades significantly.
It's far from perfect but its not a bad compromise until someone cracks A2DP on the XDA (something which I would happily pay £50 to achieve, if any interested party is listening).
Cheers,
Ged.
Headset Update
I've been playing around with bluetooth headset settings and I can't make it work under either BT stack.
BLUETOOTH HEADSET
Hi there mate I have V3 BTHS I tried using broadcom plus the upgrade but its not working...not sure though if I configure it correctly ...When i checked the connection on the bluetooth MAnager/Active Connection it shows an Icon in the Outgoing Connection and it is connected but i dont hear any sounds on my bt headset. What could be the problem? BTW my BT works on the orig bluetooth progy but only on the calls not in music players and sound notification. Hope you can help me. Thanks
As I understand it, you can use a BT headset for calls or BT headphones for music, but not both. My headphones are supposed to work in headset mode but they don't... for the moment at least.
Sorry I can't help further mate.
I understand "High Quality Audio setup" is A2DP. There is nothing more to achieve.
Surur
Okay I have the Bluetake i-PHONO on order. Can someone please tell me if it's possible to use them as stereo headphones and a headset at the same time? When you add the Bluetake to your BT setup as high-quality audio, can you add it at the same time as a BT headset? Does it show up as two icons in the BT manager? The Bluetake is supposed to automatically switch between A2DP and headset/handsfree profile... What I want is to be listening to music using media player over A2DP, then hit the button on the Bluetake and pick up a call. Isn't this the way it's supposed to work?
BLUETOOTH HEADSET
oh ok now it makes sense hehe. thanks PinkySlayer. Iphono is bit expensive though its almost a price of a mini ipod...
Expensive they may be, MTX, but I HATE cables, and what's the point in carrying around an MP3 player when you already have one in the form of an XDA (albeit with a few 1GB SD cards in tow)!? I'm working towards a personal nirvana of "single music source, multiple outputs"; I have an FM transmitter wired up to my GPS enabled car cradle so both my WMA and TomTom audio come out of my car speakers; I have wireless Sennheiser headphones for the house and now and now I have wireless BT headphones for mobile use.
I didn't think that was the case, surur. It certainly isn't in practican terms in that the Bluetake phones work great with their own BT dongle (which truly supports A2DP) but with the "High Quality Audio setup", things arn't so rosy.
That's what the Bluetake phones are designed to do, trhuseby, but I think the only way to achieve that at the moment is to use the BT dongle for music playback and then connect your XDA direct to the phones in headset mode. I believe that the phones would then automatically swap from music playback to headset mode when a call comes in, but you have to use that bloody dongle.
The settings for "High Quality Audio setup" do allow the (de)selection of both audio and headset connections but alas, this does not make it work.
BT HEADPHONE
yeah i hear you Pinkyslayer...I really like to have a bt headphone i'm just looking for a cheaper headphone. i was thinking on buying a HP or Toshiba headphones
http://ces.engadget.com/entry/1234000003026291/
will this work? Thanks
Can't see why not.
trhuseby said:
Okay I have the Bluetake i-PHONO on order. Can someone please tell me if it's possible to use them as stereo headphones and a headset at the same time? When you add the Bluetake to your BT setup as high-quality audio, can you add it at the same time as a BT headset? Does it show up as two icons in the BT manager? The Bluetake is supposed to automatically switch between A2DP and headset/handsfree profile... What I want is to be listening to music using media player over A2DP, then hit the button on the Bluetake and pick up a call. Isn't this the way it's supposed to work?
Click to expand...
Click to collapse
Hi, finally did you try the Bluetake? Did you found any solution or stereo headphones with headset working for you?
Thanks
Hi im looking for some bluetooth headphones for my blackstone. I want to be able to answer calls and control the media player using the bluetooth headphones.
Does anybody have a rough idea if any of the following are compatable. I know they are not well known brands but thought i may aswell ask anyway.
cheers
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=160327905040
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=120318070798
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=120383172015
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=150338016640
i bought the 2nd one
http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=120318070798
wat i can say is not bad. Clear when paired wif both my phone and my laptop.
ps. for better sound quality, i'm using my own headphone.
do the controls work ie play ,pause, prev track, next track ect?
bjy8138 said:
i bought the 2nd one
http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=120318070798
wat i can say is not bad. Clear when paired wif both my phone and my laptop.
ps. for better sound quality, i'm using my own headphone.
Click to expand...
Click to collapse
Is this headset compatible with voice dialing? I use microsoft voice control.
Thanks
Why not get some well known branded headsets like motorola s9, that comes close to the price range as well...
i dont like the headsets. i want something that can clip on my shirt, control the hd media player and plug any headphones into.
cheers
Calypso SP
Hi,
I first had the Motorola S9 which were nice, but too much bass, and after some time they completely fell apart
Now I bought the Calypso SP and they work just fine. They support Bluetooth 2.0, so you don't have those annoying pauses if the phone is not exactly behind your back, and the sound is great.
They look a bit like Princess Leia's haircut though
KR
Xandi
I've got sony ericsson HBH-DS970 and they're really excellent.
They will control next/previous track etc in the built in touchflo player but I cannot find out how to make them control Coreplayer instead. I hate the built in player and use Coreplayer for almost everything, but I've had to stop using these headphones because I can't control the tracks with them sadly. Really gutted about it.
I've got Sennheiser CX500s which sound great, but the track control & untangled wires of the bluetooth set was brilliant, and the sound was very good too.
Anyone know a decent bluetooth earbud set that works to control Coreplayer? Or a way I can fix this problem as it really sucks.
do the controls work with windows media player?
My Motorola H17 pairs and connects to my TP but there's no sound when playing music or audio. It works fine with my Optimus V phone using the BT-Mono app to redirect the sound out to the headset. I've tried BT-Mono which appears to function correctly (no errors etc), but when I switch it over no audio through the H17 although the tablet speaker is muted as it should be.
Is there something else I need to do on the Prime to switch the sound over, is it an incompatibility issue with this headset, or is there another app that would work? I've searched a bit and apparently others with BT headsets get them working with TP, but also found very little on the subject. Perhaps it's the lack of phone functionality with some headsets? I'd try another brand/model if I was sure it would work.
Thanks for any help.
Get audio manager from the market, there is both pay and free, pay attention to incall volume. It worked for me, seems incall volume is defaulted to zero at least in my case.
Dahenjo said:
My Motorola H17 pairs and connects to my TP but there's no sound when playing music or audio. It works fine with my Optimus V phone using the BT-Mono app to redirect the sound out to the headset. I've tried BT-Mono which appears to function correctly (no errors etc), but when I switch it over no audio through the H17 although the tablet speaker is muted as it should be.
Is there something else I need to do on the Prime to switch the sound over, is it an incompatibility issue with this headset, or is there another app that would work? I've searched a bit and apparently others with BT headsets get them working with TP, but also found very little on the subject. Perhaps it's the lack of phone functionality with some headsets? I'd try another brand/model if I was sure it would work.
Thanks for any help.
Click to expand...
Click to collapse
Does anyone use an audio profile app they really like? I'm trying to find one that will consistently apply a custom EQ only when connected to my bluetooth helmet. The rest of the time I would like the EQ to be perfectly flat, with no intervention at all. Is this even possible? I need to knock the treble way down for listening to music while riding and would appreciate it if it didnt apply to profile to my other bluetooth headsets used for phone calls.
i like using the stock music app or google play music. I do own poweramp but it didnt have this function.
abbazaba said:
Does anyone use an audio profile app they really like? I'm trying to find one that will consistently apply a custom EQ only when connected to my bluetooth helmet. The rest of the time I would like the EQ to be perfectly flat, with no intervention at all. Is this even possible? I need to knock the treble way down for listening to music while riding and would appreciate it if it didnt apply to profile to my other bluetooth headsets used for phone calls.
i like using the stock music app or google play music. I do own poweramp but it didnt have this function.
Click to expand...
Click to collapse
I used a software called DSP Manager, but I don't see it in the Play store anymore. But if you search for DSP in Play store you should see some other ones that do pretty much what your looking for.
abbazaba said:
Does anyone use an audio profile app they really like? I'm trying to find one that will consistently apply a custom EQ only when connected to my bluetooth helmet. The rest of the time I would like the EQ to be perfectly flat, with no intervention at all. Is this even possible? I need to knock the treble way down for listening to music while riding and would appreciate it if it didnt apply to profile to my other bluetooth headsets used for phone calls.
i like using the stock music app or google play music. I do own poweramp but it didnt have this function.
Click to expand...
Click to collapse
Silly quesiton and not that it really matters, but is this actually legal?
Will
shellguy said:
Silly quesiton and not that it really matters, but is this actually legal?
Will
Click to expand...
Click to collapse
I don't see nothing illegal by doing so, hes just modifying the why the music sounds on the fly not permanently applying the modification. It's up to the consumer to regulate how he listens to the music.
No my concern was the listening to music while wearing the helmet. Not the changes to the phone it self. Sorry I didn't make that clear.
Will
^Headphones in helmets are legit.
I use Volume+, on both transformer prime, and the evo.
it works great. Has seperate profiles for Handset, speaker, bluetooth,and headphones.
Unfortunately it wouldn't allow seperate settings for two seperate bluetooth devices though. Its just bluetooth in general.
Although, the way your headphones probably come up as media audio and a handsfree comes up as a headset device, maybe it would treat it differently, would have to try it out.
I have the A100 HTC Car StereoClip for streaming audio to my car stereo, but only the bluetooth profile is for "Media audio."
The device works great for streaming audio - it sounds just as good as a wired connection - but, it will not work for phone calls. When a call comes in, the "media audio" stops/pauses, then the call comes through the phone's speaker. With a wired connection using the physical headphone jack, the call will go through the car stereo and use the phone's microphone.
Is it possible to force a different profile for the A100 to do the same thing as the wired connection?
junkmail9 said:
I have the A100 HTC Car StereoClip for streaming audio to my car stereo, but only the bluetooth profile is for "Media audio."
The device works great for streaming audio - it sounds just as good as a wired connection - but, it will not work for phone calls. When a call comes in, the "media audio" stops/pauses, then the call comes through the phone's speaker. With a wired connection using the physical headphone jack, the call will go through the car stereo and use the phone's microphone.
Is it possible to force a different profile for the A100 to do the same thing as the wired connection?
Click to expand...
Click to collapse
I've been searching for this same exact question, but haven't found jack. Did you ever figure this out?
h41cyon said:
I've been searching for this same exact question, but haven't found jack. Did you ever figure this out?
Click to expand...
Click to collapse
Not yet. I haven't found any app or utility that will make the A100 work like a corded link for phone calls.
I am hoping the answer lies in the /system/etc/bluetooth/audio.conf file. I haven't really looked into it because root is needed to test anything there. I plan to resume looking into this once s-off is achieved.
any solutions as of yet????
optiknerv said:
any solutions as of yet????
Click to expand...
Click to collapse
Nothing as of yet. However, the answer is not in the audio.conf file.
Can anyone tell me where the system detects the headphone jack is inserted and then redirects the audio?
Go to the bluetooth settings for your device, you will see two different options "Phone Audio" and "Media Audio". If you only see "Media Audio" your A100 does not support the required bluetooth prodiles to handle phone calls.
These are two separate bluetooth audio profiles, HFP for phone and AVRCP/A2DP for media.
When a phone call comes in, the phone pauses the AVRCP connection for the duration of the phone call, and HFP comes on to handle the call.
This is the device I used for bluetooth media/phone calls in my older model car, nothing spectacular about it but it works decently for being a $40 unit.
Connects via wire/RCA jacks to aux port and needs to be hardwired into power though.
http://www.clarion.com/us/en/produc...es/BLT370/us-en-product-pf_1259392722474.html
Reading around ive abandoned the idea of finding a way to get this working on a2dp devices. Its just so stupid. All I want is to route the audio through the speakers, the microphone in the one x is close enough to pick up my voice. This is what I used to have when I hard wired the audio to my stereo in my car, and now with blutooth I can't.
optiknerv said:
Reading around ive abandoned the idea of finding a way to get this working on a2dp devices. Its just so stupid. All I want is to route the audio through the speakers, the microphone in the one x is close enough to pick up my voice. This is what I used to have when I hard wired the audio to my stereo in my car, and now with blutooth I can't.
Click to expand...
Click to collapse
Exactly. I haven't given up yet, but I agree that information on this is few and far between. Most info seems to be focused on redirecting all audio to mono SDP. With root, it should be possible somehow by re-routing the audio. I'm even ok if the music gets blended with phone audio - it might be annoying, but not nearly as frustrating as not getting phone audio via A2DP.
Sent from my Kindle Fire using Xparent Blue Tapatalk 2
any one have anything yet?
App soundabout
Sent from my ADR6410LVW using xda app-developers app
jose51197 said:
App soundabout
Sent from my ADR6410LVW using xda app-developers app
Click to expand...
Click to collapse
Unfortunately, even SoundAbout can't force the phone audio over AD2P-only devices. I talked (well, emailed) with the author about it last December. He was very receptive to input and he even tried a couple things, but no joy.
This solution requires root and knowledge beyond me. Or, I need to buy an adapter that supports AD2P and SCO and has a microphone.