Build#: 4.5.2A-51_OLL-17
System: 45.2.17.MB860.BellMobility.en.CA
Version: 2.3.4 (on rooted stock Gingerbread)
I rooted my 2.3.4 Bell Atrix using the instructions on Atrixforums website, and it worked like a charm. Then i went into the market and downloaded ROM Manager, through which i flashed the latest Clockwork Mod Recovery. Since this was going to be my first time flashing a Custom ROM, I followed online advice of performing a Nandroid backup. I pressed "Backup Current ROM" in ROM Manager, and my phone turned off. When it turned back on, I was at the Motorola Dual Core screen, and at the top there was a message: "Failed to boot 2 Starting RSD Mode". After reading some more on the forums, I noticed that I never unlocked my phone and that I couldn't flash a custom Recovery meaning Nandroid backups won't work.
But now I'm stuck with a broken Recovery mode and I don't know what to do to fix this. Can I still flash the original recovery image back to fix the Failed to boot error?
Can someone please help point me to the right direction?
Thanks
Try pulling the battery. Hope that works, then unlock your phone, re root it and install rom racers recovery and you should be good to go. Thoroughly read the beginners thread, it will answer a lot of your questions and help walk you through everything you ned to do. Saved me a lot of hassle and headaches
JRW 28 said:
Try pulling the battery. Hope that works, then unlock your phone, re root it and install rom racers recovery and you should be good to go. Thoroughly read the beginners thread, it will answer a lot of your questions and help walk you through everything you ned to do. Saved me a lot of hassle and headaches
Click to expand...
Click to collapse
to unlock my phone, don't i need to get into the recovery mode first? I can still boot into the homescreen and do stuff, but it's just the recovery mode is screwed up. RSD lite and stuff still works though. Would you be kind enough to provide a link to the right direction to unlock the phone? Will this fix my recovery mode problem? I've been going on a wild goose chase to find a way to install a custom ROM and alot of the posts were for the AT&T Atrix (or at least i believe it's only compatible with the ATT Atrix).
no, you have to use RDS to flash a unlockable bootloader, use fastboot, and then install the custom recovery
Sent from my MB860 using XDA App
i am having this same exact problem as the original poster. i am still new to the "rooting" world, and the motorola atrix is quite a bit more difficult then the other devices i have rooted, if someone could link a guide to follow it would be very much appreciated, i have been browsing the forum for quite awhile now searching for a guide. again, thank you very much for your time and please excuse my ignorance.
guidoido004 said:
no, you have to use RDS to flash a unlockable bootloader, use fastboot, and then install the custom recovery
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
+1
Sent from my MB860 using XDA App
How to unlock:
http://forum.xda-developers.com/showthread.php?t=1136261
Related
Good morning everyone. I have a major technical issue with my phone after flashing to HKTW 2.3.4 and I am in dire need of assistance. I hope someone here can help me asap since I really need to use this phone.
So here is my issue. After flashing to 2.3.4 via Flash Recovery, I was greeted with an unusable touchscreen. Everything looked fine, however when I try to "touch" anything on the screen (keyboard, icons, menus, etc) I am forced to touch the opposite side of it, which means to click on an icon on the left side of the screen, i have to touch the right side of the screen. Similarly with the keyboard, to click a letter that's on the right side of the screen, I have to touch on the left side. I think the touchscreen is mirrored, probably for the Chinese characters?
But not only that, apparently, the 4 primary touch buttons (menu, home, return, search) are also reversed, thus having me to touch search in order to access menu.
I practically can't set up the phone due to this, and I didn't make a backup of /data prior to unlocking the phone (didnt know how to do so earlier). I have backups from TiBu but it's at home right now.
Is there anything I can do? Maybe change a setting via root explorer, or maybe through Flash recovery? Please someone help me.
Thanks,
Aqua
p.s. Moderators/Admins, I know I've posted this in several threads and I apologize for "spamming" but this is very urgent, so please don't delete this thread. Thank you.
Try to SBF flash 1.83 via RSDLite
Sent from my MB860 using XDA App
neer2005 said:
Try to SBF flash 1.83 via RSDLite
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Hi Neer, I will try that right now. If it fixes the issue, then something's wrong my flash to 2.3.4. I was hoping that I can resolve this without going backwards but I guess have no choice.
aquariuz23 said:
Hi Neer, I will try that right now. If it fixes the issue, then something's wrong my flash to 2.3.4. I was hoping that I can resolve this without going backwards but I guess have no choice.
Click to expand...
Click to collapse
That's the only hope you've got buddy.
Sent from rooted Atrix on 2.3.4 with unlocked bootloader using xda premium app.
ceo.mtcl said:
That's the only hope you've got buddy.
Sent from rooted Atrix on 2.3.4 with unlocked bootloader using xda premium app.
Click to expand...
Click to collapse
Crap!! now it's stuck in a boot loop. After flashing 1.8.3, it attempts to boot, and after passing the att screen, the screen goes black and the red led continuously blinks. Afterwards it just reboots again. What should I do?
the cwm flash method seems to present this bug to several people. Now that you have flashed to 1.8.3, try going into recovery and doing a factory reset. If that does not do it, i would then try flashing either 1.8.3 or 2.3.4 via fastboot, by manually flashing the system and boot partitions. if neither suggestion works, then this problem is beyond my realm of expertise and youll have to wait on someone who knows what they are talking about to chime in.
Well, I now can't proceed nowhere. Apparently, I bricked my phone flashing back to 1.8.3. Now another ordeal to tackle. Gonna try Designgear's guide to recovering from a brick. Wish me luck
aquariuz23 said:
Well, I now can't proceed nowhere. Apparently, I bricked my phone flashing back to 1.8.3. Now another ordeal to tackle. Gonna try Designgear's guide to recovering from a brick. Wish me luck
Click to expand...
Click to collapse
the same thing happened to me.. charge up your phone all the way and flash the 1.2.6 SBF. it took 2 seperate flashed for me, but it worked. and then i was able to proceed flashing 2.3.4 again
Successfully unbricked the phone via this guide: (just posting it in case some people encountered the same issue)
http://forum.xda-developers.com/showthread.php?t=966648
Now i'm in stock 1.83 froyo. Gonna do the unlock again, and proceed from there on. Not gonna do the 2.3.4 flash via CWM, will try a different method, hopefully it wont fail on me this time
what does bricking mean?
for the record a bricked device cannot be unbricked.
SuperUserMovado said:
for the record a bricked device cannot be unbricked.
Click to expand...
Click to collapse
I guess i did a soft-brick? Not to argue with you, but based on several threads here on the forum, if the atrix is stuck boot-looping with the red led flashing rapidly, then it's considered bricked, but hey what do i know. All I care is I managed to get out of the predicament and proceed with trying to flash 2.3.4.
use the fastboot flash method, very clean and works great.
Success!!
I managed to get 2.3.4 without any issues (excluding whatever bugs there might be on this release). The touchscreen works perfectly fine without the crazy reversed touch or super sensitive responses.
After unlocking the phone using the pudding guide, I went and flashed the following through fastboot:
http://forum.xda-developers.com/showthread.php?t=1139715
And it works like a charm. I am guessing either Tenfar's CWM or his flashable 2.3.4 release is buggy and did not want to work with mine. Or maybe I simply had to start from scratch (1.83 sbf) instead of continuing from my deodexed 1.83 *shrugs*. But yeah, things are looking much better now thank god.
Now, I will try to install Tenfar's CWM and this as well:
http://forum.xda-developers.com/showthread.php?t=1142674
Hopefully all will stay well
Thanks for all your help and suggestions guys/gals.
pyro254750 said:
use the fastboot flash method, very clean and works great.
Click to expand...
Click to collapse
Did so, n it works much better than through flash recovery. Thanks.
I read a ton of threads and that is why I'm just going to make a post because I know I must be doing something wrong, but I keep reading and reading following steps and yet I can't see what I am doing wrong. I am very noob so I am so sorry for that.
I've soft bricked 3 times now so here goes.
I'm trying to install a cust rom, like cherrblur.
I first flashed to 1.5.2 because I read that I should not use 1.8.x. OK done.
I use superoneclick and root the phone (done) and then enabled side loading (done)
So far no issues!
I then need to unlock my bootloader which I do by reading the brief mobile instructions (//briefmobile.com/how-to-unlock-the-atrix-4g-bootloader)
I place the cus rom such as cherrblur onto my sd card.
I then install cwm recovery and install recovery, plug into charger recovery mode. I click down to install zip from sd card, it does and goes on to install with no issues it says down, I click back and then reboot.
THen boom, bootloop, bootloop, bootloop.... I then flash back to 1.5.2 and write this...
Any help would be greatly appreciated or even a link to a thread I might have missed? I really read a ton of stuff so I might be doing something wrong by mixing something up.
Thanks!
MrSexyMan said:
I read a ton of threads and that is why I'm just going to make a post because I know I must be doing something wrong, but I keep reading and reading following steps and yet I can't see what I am doing wrong. I am very noob so I am so sorry for that.
I've soft bricked 3 times now so here goes.
I'm trying to install a cust rom, like cherrblur.
I first flashed to 1.5.2 because I read that I should not use 1.8.x. OK done.
I use superoneclick and root the phone (done) and then enabled side loading (done)
So far no issues!
I then need to unlock my bootloader which I do by reading the brief mobile instructions (//briefmobile.com/how-to-unlock-the-atrix-4g-bootloader)
I place the cus rom such as cherrblur onto my sd card.
I then install cwm recovery and install recovery, plug into charger recovery mode. I click down to install zip from sd card, it does and goes on to install with no issues it says down, I click back and then reboot.
THen boom, bootloop, bootloop, bootloop.... I then flash back to 1.5.2 and write this...
Any help would be greatly appreciated or even a link to a thread I might have missed? I really read a ton of stuff so I might be doing something wrong by mixing something up.
Thanks!
Click to expand...
Click to collapse
Sorry to say this, but you are extremely mixed up!
1.5.2 is old. Extremely old. You are also using Tenfar's old CWM, the bootstrapped one. SuperOneClick root method was also deprecated. We now have semi-ROM Manager support, as well as a full-blown CWM from Tenfar.
I suggest you follow these videos: http://forum.xda-developers.com/showthread.php?t=1179506 or this guide: http://forum.xda-developers.com/showthread.php?t=1167373
Thank you so much, wow looking at this I was VERY mixed up! Thank you, reading the instructions now
Glad to see others think my videos are useful if u need any other help let me know
Sent from my MB860 using XDA Premium App
TechnoNeto said:
Glad to see others think my videos are useful if u need any other help let me know
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
Thank you sir, it all worked out and was explained so well! I'm so happy its like a new device!
Sent from my MB860 using XDA App
Hey guys, I hope you can help, I have a motorola atrix (At&t), and this is what happened:
My phone is rooted, and i was running Alien rom, but things went wrong when I installed Grey Blur.
Now my phone doesnt boot, and it doesnt go into recovery mode, I am not sure what to do, please help me
Thanks in Advance
droidict said:
Hey guys, I hope you can help, I have a motorola atrix (At&t), and this is what happened:
My phone is rooted, and i was running Alien rom, but things went wrong when I installed Grey Blur.
Now my phone doesnt boot, and it doesnt go into recovery mode, I am not sure what to do, please help me
Thanks in Advance
Click to expand...
Click to collapse
Why don't u flash recovery through adb, so the recovery will work and then you can install a Rom next...
You think you can walk me though it, im still a noob at this
droidict said:
You think you can walk me though it, im still a noob at this
Click to expand...
Click to collapse
You certainly can enter the boot loader ryt?
I actually own HTC incredible s so can't say much about it, nut then android OS works around the same way with bootloaders and recoveries, so hope I can get u some head start....
What exactly happens when you turn on the phone?
My ATRIX has wrote this without my consent!
Can you get into "Fastboot" mode? Wait.. are you just rooted or rooted and unlocked? If you are unlocked or even not unlocked and can get into RSD Mode, you could flash the Pudding 2.3.4 sbf. Or you could go to the "Fruit Cakes" thread, download the zip file extract the boot.img and system.img and flash them via fastboot...
The issue has been resolved...
It seemed that he could flash roms with sense 2.0 or 2.1 without any problems, but then he couldn't flash the 4ext recovery, as it did not seem to work, all it would do is give a blank screen, wherein the recovery would run but the text wasn't visible at all...
He first formatted his SD card...
Flashed 4extrecovery 2.1.0 final version. And it worked...
Next he flash VU 2.35 ROM. And power off the device after the flash from the recovery itself.
Went back into recovery again (keep in mind he hasn't started his phone, it actually ends up in boot loops) and flashed the unity v3 kernel.
Power off Tue device again and power on... Voila!!! It worked....
Some cpu's tend to be a little diff. than others. So some can bare the alterations made to their frequencies and voltage while others can't. Hope it goes well with all the IncS users....
EDIT: sorry posted this on the wrong thread... This is how another incredible s user had a problem like, so solved his one....
Ok so here's the thing I obviously have a Motorola Atrix 4g and I am from the United States. I have rooted my device via Pete's Motorola root tools, I have accessed my webtop hack and tether. I've been research for about a week straight on how to install CM7, but the CM7 that I really want is EVOGP's whch has facial recognition capabilities (http://forum.xda-developers.com/showthread.php?t=1382934&highlight=facial+recognition). I am currently running stock Gingerbread. I have previously tried t0dbld's way of installing for the latest version of CM7 (Ba2TF) based on his installation instructions (http://forum.xda-developers.com/showthread.php?t=1257574&highlight=facial+recognition). Unfortunately I failed and ended up wiping all my contacts and starting brand new. The portion that I do not see is the second step :
1.)Reboot phone into CWM recovery (Power Button + Vol Down), press Vol Down until you see "Android Recovery" then press Vol Up to enter.
2.) Go to Backup & Restore and create a backup (this may take some time)
I dont see where to go for Backup and restore to create a back. It too me a while to figure out that had to press the both volume buttons just to toggle. But this was the first area, that was blurry. If someone could explain step by step how to get to "Backup &Restore and create a backup" would be great.
Next while apparently not backing up my rom, I decided since I already had a rom and I wanted CM7 that wouldnt be important. So I try to install the Ba2tf.zip via the bootloader screen which located on my sd card. So I go "apply blah blah to Sd card" I see the Ba2tf.zip and I press the power button to unzip the file or install. The process I see starts unloading the zip file then starts to installing the file, everything is great. Then it says "installation failed".
If someone can tell me what I did wrong and give me a step by step process of what I should and be seeing, I would greatly appreciate this help. As you cant tell I really want CM7 especially EVOGP's. Please help!!! Step by step please!!!!
Have you unlocked your phone using fruitcake? Which CWM are you running?
It's Pudding, not fruitcake.
http://forum.xda-developers.com/showthread.php?t=1136261
Fruitcakes are stock system files that can flashed through CWM.
jiggytom said:
Have you unlocked your phone using fruitcake? Which CWM are you running?
Click to expand...
Click to collapse
Is your bootloader unlocked? If not, then unlock it. Search for pudding in the Dev Forum.
After that, you need the right recovery (CWM)
Which recovery are you using? You should flash romracer's latest CWM. Most of all the ROMs are using the latest Romracer's recovery so you won't go wrong with using that.
Then from there --- you should be good to go.......
I had no idea you had to unlock, I thought unlocking and rooting was the same thing. And I a bit new with lingo does CWM refer to Clockwork Mod? If so I downloaded the standard free Rom Manager on the market. I assume judging by your message I should probably unlock my phone using fruitcake? If I do can you post simplified link on how to install fruit cake?
Follow the instructions here:
http://forum.xda-developers.com/showthread.php?t=1302423
The instructions provide links for Pudding and romracer's recovery, which are both needed to flash any custom Rom.
Here's the link for CM7:
http://forum.xda-developers.com/showthread.php?t=1257574
baller24hr said:
I had no idea you had to unlock, I thought unlocking and rooting was the same thing. And I a bit new with lingo does CWM refer to Clockwork Mod? If so I downloaded the standard free Rom Manager on the market. I assume judging by your message I should probably unlock my phone using fruitcake? If I do can you post simplified link on how to install fruit cake?
Click to expand...
Click to collapse
I guess I have to use pudding right? I see the link i'll flash it. I'll go searching for Romracer's latest recovery... please point me towards it if possible.
Re-read what I wrote.
live4nyy said:
Follow the instructions here:
http://forum.xda-developers.com/showthread.php?t=1302423
The instructions provide links for Pudding and romracer's recovery, which are both needed to flash any custom Rom.
Here's the link for CM7:
http://forum.xda-developers.com/showthread.php?t=1257574
Click to expand...
Click to collapse
baller24hr said:
I guess I have to use pudding right? I see the link i'll flash it. I'll go searching for Romracer's latest recovery... please point me towards it if possible.
Click to expand...
Click to collapse
@live4nyy Thank you so much you are a huge help.... I greatly appreciate it
No problem, just make sure to read the instructions thoroughly and make sure you have the appropriate "pudding" file.
baller24hr said:
@live4nyy Thank you so much you are a huge help.... I greatly appreciate it
Click to expand...
Click to collapse
I have installed rsdlite. Where can I find the drivers that I'm supposed to install? Or does it come bundled already?
Here:
http://www.motorola.com/Support/US-...tware_and_Drivers/USB-and-PC-Charging-Drivers
Also, after you install the drivers it helps to plug it in and then go through all the USB options in the drop down and allow each one to install as well. (eg. Windows Sync, USB Mass Storage, Portal)
baller24hr said:
I have installed rsdlite. Where can I find the drivers that I'm supposed to install? Or does it come bundled already?
Click to expand...
Click to collapse
Yeah i remember downloading this a while back.... I'm currently at Proper Recovery 5B and my command prompt says <waiting for device> and it wont allow me to type 5C.... Do I choose either A,B or C then pick D? And I'm currently on my bootload screen and it says Unlocked in the top left corner
Does anybody know anything of this nature?
Someone help I'm getting worried now
Now my phone shut off and the charging light is on....
I typed in 5c and it says it's not found... i tried 5d and that didnt work <waiting for devices> .... my phone was unresponsive even to the power button so i pulled the battery and turned it on it brought me back to the bootload screen that said unlock in the top left. my phone is now charging on the normal house charger and i turned it back on it's responsive I dont have any of my cards in so it's showing motoblur
Does this mean my phones unlocked and I should just go ahead and install the CM7?
baller24hr said:
Does this mean my phones unlocked and I should just go ahead and install the CM7?
Click to expand...
Click to collapse
Yup.
Sent from my Xoom using xda premium
thanks I appreciate it
Hi, I have an Amaze 4G with ICS 4.0.3, and I want to change the rom for space in the internal memory and battery life, but it has the android 3e recovery, and will not let me flash any recovery or roms or any ZIP, always gives me the error "e: signature failure". I root, I replaced the recovery of the / system / bin for one of this forum, as amended, but still all the same. I visited all the xda forums and HTCMania, I'm Spanish and I can hardly understand English, but I have not found a way to flash without me signing error android 3e.
Help, please
Read This. It has EVERYTHING Amaze Related. Before asking another question always revert back to that to see if the question you have already has an answer.
Double0EK said:
Read This. It has EVERYTHING Amaze Related. Before asking another question always revert back to that to see if the question you have already has an answer.
Click to expand...
Click to collapse
thanks for you fast response, but i trying do it the guide step by step, no errors are saying for my phone, but reboot in recovery and beguin in android recovery 3e.
i trying more and more and more things, but never go.
odin error
amon-ra error
4ext error
clockworkmod all well but reboot in the 3e
etc, etc.
now i desilusions, for a wipe format, my google apps no go. google play no downs the apks.
i desesperated, i sorry for discomfort, but now not to try.
[Deleted]
Is your bootloader unlocked?
Sent from my SGH-T999 using xda app-developers app
Its really hard to understand but I don't think you unlocked your boot loader and flashed a recovery.
What method did you use to root?
Double0EK said:
Its really hard to understand but I don't think you unlocked your boot loader and flashed a recovery.
What method did you use to root?
Click to expand...
Click to collapse
i`m root with unlockroot.
Gasuky said:
i`m root with unlockroot.
Click to expand...
Click to collapse
How sure are you that you're rooted? Anyways, if you just used an app to root, it won't be possible to flash a custom recovery until you unlock your bootloader.
hello, I have not posted before, it broke my wifi.
Turns out my ruby, is a Chinese clone, if you have not unlocked the bootloader, but try to flash the recovery.img with flashtools and I did, but it was starting to 3e, so try flashing boot.img, a boot.img flashtools accept, and did, but when you restart the phone, it stays in green android screen with black background.
Any idea?
Gasuky said:
hello, I have not posted before, it broke my wifi.
Turns out my ruby, is a Chinese clone, if you have not unlocked the bootloader, but try to flash the recovery.img with flashtools and I did, but it was starting to 3e, so try flashing boot.img, a boot.img flashtools accept, and did, but when you restart the phone, it stays in green android screen with black background.
Any idea?
Click to expand...
Click to collapse
You honestly lost me there, if your device is a Chinese clone, why would you attempt to flash files from this device to begin with? You'll need the stock files for that device to recover it.
of course, but i buy an Htc Amaze 4g and not a chinese phone. i dont know that thing, and now flash recovery.img and boot img compatibles with htc ruby, with flashtools and my phone fake is brick. Only on to android green and hold in that screen.
Today, i open new thread
http://forum.xda-developers.com/showthread.php?t=1916935.
i am not know this phone is a fake.
somebody can help me.
Thanks.
otherwise, a friend too buy the same phone. I can get the archives necessary to recovery my phone?
I did not know it was a clone, I bought it as HTC Amaze 4G:
http://www.fastcardtech.com/goods.php?id=7080
but when I hear that is a clone someone contact the customer service, and gave me the link to download the stock ROM from my phone.
http://www.sendspace.com/file/lgkfyw
So I made my query in this forum. From what I have seen, this MOBILE, carries a EVO 4g rom, so I'll try to find solutions for this.
I appreciate all the responses received.
thanks