Related
I did all that rooting crap. Now when I press the power putton, it flashes the "Samsung Vibrant" Image, then plays the tmobile tone, but no "S" image appears. And it stays black. How do I fix this?
define "all the rooting crap"? Did you flash a Voodoo Rom and try to flash something else on top of it?
There is NO way to tell you what you need to do unless you tell us what you did.
But based on what you have described.. Gonna say u are SOL.
Use odin to flash stock rom then start over. I have been stuck on that screen a couple times. Lol
Sent from my SGH-T959 using XDA App
Truth be told
Anthony is right. i had this issue earlier this week when trying to flash a mod to my phone. Odin is the only choice at this point.
This has happened to me twice, most recently after "fixing permissions" in the oclf market program. Both times I've rectified by booting into recovery and "reinstall packages". Both times I also removed sim and sd and after a couple repetitions of package reinstall it comes back to life. Maybe dumb luck, maybe not, worked twice...
Sent from my SGH-T959 using XDA App
Correction, fixing permissions in Rom Manager...
Sent from my SGH-T959 using XDA App
Also...My Vibrant Wont Turn On
Dear All
I am new to this forum and need some assistance. I recently bought a T-Mobile Vibrant from a friend who had brought it with him for the US. I am using it in the Middle East where I live at the moment.
I have been reading a lot in the past few weeks about the Vibrant and almost everything there is to know. It seems there is always more to discover.
Back to the issue at hand. I had been having problems with getting my phone to reboot into recovery mode but I finally managed to do so last night. I wanted to flash my phone with Axura 2.1E, Nero V2 or the Macnut v14, so I can use the the Black Froyo theme on it.
First, I flashed the original firmware (T959...JDF) which I got off your site, using Odin v1.3. That worked as it should. Then I proceeded to follow instructions to download the ClockworkMod from this thread: [RECOVERY] ClockworkMod Recovery for Vibrant (FINAL! SAFE!)
After I copied the CWM file to the Internal sd card, I downloaded Rom Manager, rooted the phone with Z4root, chose the Samsung Vibrant in Rom manager and clicked install ROM from sd card. it rebooted into recover mode (blue writting), I clicked 'reinstall packages', which it did and it rebooted into the ROM recovery mode (green writting). I chose the option to install zip file from sd card, then chose Axura 2.1E and it installed until it said complete.
So far everything was working as it should, or at least that was the impression I got. I am not sure of this next step. It said installation complete, so i chose 'go back', then 'reboot device'. When it went into reboot, nothing happened...just a black screen. It wont start, neither normally, not into any other mode (recovery or download). i plugged it into the charger and not even the battery icon would come up. i assume that it is...'dead' and I just did the impossible. I tried several ways and combinations to get it back to life somehow, but I have a feeling that's it.
Any suggestions, advice, remedies, whatever help...even condolences would be much appreciated..
Much appreciated and all the best to all.
Cheers
What the heck is up with all these HARD BRICKs?
Past few days, I keep reading people who have appeared to truely HARD BRICK their phone.
Meaning they can not get into download mode, they can not use odin, they are truely hard bricked.
What is up with the sudden surge of hard bricks.
This guy sounds like he did everything correct.
Scary.
Ya I've seen a lot of those also... could it be a newer version of the Vibrant? Yes he did everything correctly... he could try a jig.. its only maybe 10 bucks? worth a try at least...
My Vibrant wont turn on
Thanks guys for the reply to my post. I was thinking today that even though I did follow instructions correctly, that I might have missed a step at the end.
My thoughts went to the fact that after the installation of my chosen ROM (Axura 2.1E) was complete, I was given the choice of installing update.zip again, along with some other ones which I forgot what they were and the option to 'go back'. I went 'back' and pressed reboot device.
If the installation was fully complete, would not the phone go into automatic reboot?
Anyways seem like the boot is screwed and I am getting help from a friend to get it back to life again.
Anyone can confirm what to do after I install a 'ROM' successfully. Is there another step afterwards which I must be aware of to fully complete the flash?
Cheers again
Hey I got a old stock rom from off one of these forms off xda... for my samsung vibrant... After i flash the rom odin said reset and the vibrant never turned on.... its been like this for a day now... the battery sign dosent even turn on... what can i do..
hellobitchdog said:
Hey I got a old stock rom from off one of these forms off xda... for my samsung vibrant... After i flash the rom odin said reset and the vibrant never turned on.... its been like this for a day now... the battery sign dosent even turn on... what can i do..
Click to expand...
Click to collapse
Get into download mode try again,
if not try getting the files from a different source
Sent from my SGH-T959 using XDA App
Sent from my SGH-T959 using XDA App
Hey everyone...
I need help.. And its not my phone nor do i have it in my possession... Kinda troubleshooting over the phone... My nephew got a samsung vibrant... Got his phone rooted and had Darky's v7.7 Gingerbread Edition rom running... It booted up ran for a bit had a LOGSPROVIDER error stopped unexeptedly message....
He shut the phone off then rebooted and it wont boot past the first boot screen... HE also cant get into recovery but download mode works fine..
Possible solutions..?
Well if he can get into download mode the he should just odin back to stock and reinstall the rom!
Sent from my SGH-T959 using XDA App
Thats what I was thinking... Im not familiar with samsung phones.. Whats the purpose of download mode?
Safety feature? I presume..
I find it odd though that it booted fine and was ok until he rebooted and it wouldnt load... Any specific reason that could happen
Nah if you read the disclaimers devs put up it clearly says "i am not responsible for bricking, etc."
So no, there should be no specific reason why your nephews phone won't boot, more unless he was running a lag fix and flashed the wrong zip or whatever then yeah...
But download mode is I guess a fail-safe for samsung if the phone bricks or anything, afterall the vibrant is nearly impossible to fully brick
Sent from my SGH-T959 using XDA App
Thank You for the help...
He opted to call tmo and there sending a replacement.. Then asked him if he bricked the phone... He played dumb.. and said he rebooted the phone and it wouldnt load...
And yes i know about the devs disclosure... Got myself a mytouch slide which just finally got s-off courtesy of ALPHAREV woohoo.. Also have a G1 from back when it first came out.. SO i got plenty of rom downloading under my belt
hellobitchdog said:
Hey I got a old stock rom from off one of these forms off xda... for my samsung vibrant... After i flash the rom odin said reset and the vibrant never turned on.... its been like this for a day now... the battery sign dosent even turn on... what can i do..
Click to expand...
Click to collapse
This same thing happened to me. I read about making a jig, yeah right. So I continued for the better part of three hours plugged into my computer with data cable continuing the same motion that I would to get into download mode. And finally I got the download dude. I used the s1.odin somthing .pit file I think it was the first .pit to come out. Not the 512.pit Along with the first .jar. Anyway keep trying to get into download mode even with a black screen, can be done.
Sent from my SGH-T959 using XDA App
Hey guys. I've been an Android & XDA user for a while now, so this question shouldn't be about a nooby-sitiuation.
My friend bought an AT&T Samsung Galaxy SII (SGH-i777) this week. I've been trying to flash CM7 ever since. I got the rooting done, the properly recovery (with no signature / "abort" problems)
The rom seems to keep bricking the phone. Its simply unflashable. I seen tons of people on XDA who got it to work, with barely any serious problems. I troubleshooted the problem myself, and its simply just the CM7 roms. I would do a full wipe, and then install the rom like I would on my other Android phones, and the installation is successful. When it boots, it gets stuck on the Galaxy SII boot screen (not the splash/boot animation screen) and it would stay on it with a yellow warning triangle on the bottom.
I tried flashing other roms, like Cognition X2, and they worked. Its just CM7 on this phone... which is odd because CM7 is usually stable (nightlies aside.) Especially since the 7.1 stable version was recently released. Anyone can help me get the rom up and going? Would be highly appreciated.
did you try to wipe dalvick cashe as well when you wiped data?
I just flashed it tonight myself and all I did was reboot into CWM and did a Wipe data/factory reset and then Wipe cache partition. After doing that, I simply flashed the cm7 zip file that was loaded on my internal sd. Rebooted and no problems.
I didn't have ANH ISSUES installing it but I know I read that some.people bad to flash it twice initially. So flash it, then when it goes back to the recovery screen flash it a second time. I also remember users on the international SGS2 bad to do the same thing. Most have no issues but I think they found that it depends on what you used to root your phone (on the SGS2 internationals) and I THINK some had to do the same here. Try it and if it works just hit the thanks button.
Sent from My KickAss CM7 Galaxy S2
if you flash it and get stuck in a bootloop, just pull the battery, and 3-finger back into recovery to flash the rom again.
keep doing this until you get it up and running - took me a few times, including a couple of battery pulls.
How do you boot into recovery? I know On the SGH-i777 you have to hold the Vol down+back+power to get to the Download mode, but I tried everything to get to the recovery itself.
Boobie Watcher said:
did you try to wipe dalvick cashe as well when you wiped data?
Click to expand...
Click to collapse
Yes. I've flashed many roms before, this seems to be the only one I had ever seen a problem with.
mfpearson said:
if you flash it and get stuck in a bootloop, just pull the battery, and 3-finger back into recovery to flash the rom again.
keep doing this until you get it up and running - took me a few times, including a couple of battery pulls.
Click to expand...
Click to collapse
Word.
Edit: To boot into recovery vol up+vol down+power
Had the same problem. Read somewhere to install the ROM twice in a row in CWM without rebooting inbetween. Worked like a charm.
Thanks for the feedback guys. I'll try this in the morning once I get my hands on the phone again.
Saw this type of behaviour on occasion with cm7 on my aria. Sometimes caused by a bad download of the rom. Did you verify md5s ?
Sent from my SAMSUNG-SGH-I777 using Tapatalk
Don't forget to do a master data clear /reset before trying to boot the new CM7 rom for the first time - clear out the old stuff. Works perfectly here.
Sent from my SGH-I777 using xda premium
I'm having the same issue. I'm getting signature errors when trying to flashCM7.1 stable. I've downloaded it two times now with the same problem. My question is, I'm trying to flash from on the phone itself, storing the zip in the download dir on the phone as I don't have an sd card. Will this even work? I've tried looking around and all I can find is flashing from an sd card. I can get one, I just haven't yet.
squigge said:
I'm having the same issue. I'm getting signature errors when trying to flashCM7.1 stable. I've downloaded it two times now with the same problem. My question is, I'm trying to flash from on the phone itself, storing the zip in the download dir on the phone as I don't have an sd card. Will this even work? I've tried looking around and all I can find is flashing from an sd card. I can get one, I just haven't yet.
Click to expand...
Click to collapse
That's the way I did it. Put the update in the same folder on the internal SD card. I can't even access my external SD card from CWM.
Sent from my SGH-I777 using xda premium
Hmm, I'm not sure what I'm doing wrong then. I did a factory reset, and wiped the cache and get the same thing. I know it wiped because now I have nothing setup on the phone when I boot normally. Suggestions?
Quit downloading the CM7 builds for the International Galaxy S II. They will NOT work. That is why it fails. Look for the Galaxys2ATT build.
Sent from my SGH-I777 using xda premium
I got the build by going to the cm7 website, looking by device, finding the galaxy s 2 and grabbing the stable one. So perhaps that is the incorrect one and I'll look closer for one that has att in it, whenever the site isn't going up and down. They seem to be having issues today.
Make sure you're installing the version located in this thread...
http://forum.xda-developers.com/showthread.php?t=1297568
Specifically this link
Double flash made it work. Thanks guys. + thanks for telling me how to boot into recovery lol. Great rom.
Sorry for the newb issues, it was the wrong version. I got the att version from the thread previously mentioned and that worked perfectly. Thanks!
so i try to turn on wifi and ses error and hard resets and then just randomly does it so i tried flashing a different rom well 4 of them actually and none of them fixed it then i tried to sbf with 183 with pudding then it wouldnt even loadn up it would get to the att logo then reboot and go off with the red light flashing finally i had to fast boot to get clockwork mod then flashed another rom and its still doing it any one got an answer to this crap
Engrish Prease?
If I'm getting that right, you bootlooped, tried flashing 4 roms without wiping, then decided to sbf?
Well... Fastboot wipe, try flashing any rom using the latest romracer recovery, and hope that you didn't HARD BRICK YOUR PHONE BECAUSE YOU USED AN SBF.
omni_angel7 said:
Engrish Prease?
If I'm getting that right, you bootlooped, tried flashing 4 roms without wiping, then decided to sbf?
Well... Fastboot wipe, try flashing any rom using the latest romracer recovery, and hope that you didn't HARD BRICK YOUR PHONE BECAUSE YOU USED AN SBF.
Click to expand...
Click to collapse
i would say that is english! i decided not to use punctuation, my bad you cant read that sorry let me include i wiped each and everytime before i flashed i am not a newb at this so if your not going to help then don't post!!! simple enough right.???
somthing new now when i plug my charger in to charge it it reboots and stays at the moto screen.
shadowscreation said:
i would say that is english! i decided not to use punctuation, my bad you cant read that sorry let me include i wiped each and everytime before i flashed i am not a newb at this so if your not going to help then don't post!!! simple enough right.???
somthing new now when i plug my charger in to charge it it reboots and stays at the moto screen.
Click to expand...
Click to collapse
Still don't know whether you're on the latest recovery (romracer's or CWM touch). That could be an issue. If you aren't getting failed to boot message, then it's almost certainly a software issue. Were it my atrix, I would ask myself:
Am I still getting the white unlocked text after that SBF?
1. If not, then unlock, wipe, and flash a rom using the latest recovery, and NEVER touch another SBF
2. If so, try a more thorough wipe if possible. Use every fastboot erase and make sure that your downloaded ROM isn't corrupted. Then do the rest of 1. minus unlocking, of course.
I have the latest rom racer recovery and the sbf I flashed was 1.83 with pudding I got it mostly functional again by restoring a backup I had. but still if I try to turn on wifi it will say error and the bootlooping starts all over again . That seems to be what is causing it. And yes the unlocked is still at the top of the moto logo.
Sent from my MB860 using XDA Premium App
So i purchased an atrix 4g off of eBay, and it has a few Root applications on it, but isn't actually rooted.
The android recovery mode is also broken, i get an android robot with the Attention symbol. Would post a link to one i found on the internet but i cannot since i am under 8 posts.
The phone was on 2.3.6 build # 4.5.141 when i received it. and i have done nothing to it so far.
So maybe someone applied OTA updates and killed the root or something, idk.
in the end the end i would like to root it with some ISC.
So is there anyway i can Reset everything to stock out of the box. Or to fix the problems with recovery?
Also for now it wont really be used as a phone, as i don't have a sim yet.
To cover the basics here let's make sure the phone isn't bootloader unlocked or rooted. To check bootloader, when you boot the phone, does the moto screen say "Unlocked" in top left hand corner of the screen? If not, it isn't. Then for root, check it with the app root checker basic or pro from market. Get back to the thread once you can answer those questions and then I will post something to help you with the getting ics.
Sent from my Atrix with XDA Premium
Both of those come up as a no So no unlocked boot loader and no root
Try this but you know the risks of messing with the phone right??? Read EVERYTHING before you do. Your phone says a different version of firmware than the thread but if you look back in the posts of the thread in the end, it will work. You can also read the Atrix thread stickies.
Edit.... having trouble posting link ... give me sec.
Edit 2....can't post from phone. Let me post it from my computer when I get to the computer in the morning.
Sent from my Atrix with XDA Premium
Is this the link you wanted to post?
http://forum.xda-developers.com/showthread.php?t=1182871
If so i cant go through with it because my "Android Recovery" menu is broken.
Ahh now i see, i was selecting the wrong option stupid me
Ok now i have my bootloader unlocked CMW installed, wouldn't boot into android just sat there on M dual core screen for a long time. Ok tries to install another rom
MIUI but that has the same problem gets stuck at That Screen, i can still get into recovery, and everything.
Now what?
dfanz0r said:
Ok now i have my bootloader unlocked CMW installed, wouldn't boot into android just sat there on M dual core screen for a long time. Ok tries to install another rom
MIUI but that has the same problem gets stuck at That Screen, i can still get into recovery, and everything.
Now what?
Click to expand...
Click to collapse
Did you wipe before installing?
Sent from my MB860 running Jokersax's CM9
Yes i wiped
dfanz0r said:
Yes i wiped
Click to expand...
Click to collapse
Try cm9. Here's the order you should do it in:
1. Full wipe
2. Flash 0.6
3. Flash 0.6 again
4. Flash gapps
Sent from my MB860 running Jokersax's CM9
dfanz0r said:
Is this the link you wanted to post?
http://forum.xda-developers.com/showthread.php?t=1182871
If so i cant go through with it because my "Android Recovery" menu is broken.
Ahh now i see, i was selecting the wrong option stupid me
Click to expand...
Click to collapse
Yup that was it.
Glad you found it.
Sent from my Atrix with XDA Premium
giqbal said:
Try cm9. Here's the order you should do it in:
1. Full wipe
2. Flash 0.6
3. Flash 0.6 again
4. Flash gapps
Sent from my MB860 running Jokersax's CM9
Click to expand...
Click to collapse
This doesn't work either same result
Does anyone else have any ideas?
dfanz0r said:
Does anyone else have any ideas?
Click to expand...
Click to collapse
Have you flashed a different ROM for the time being to at least have a working phone? Like a blur or cm7 ROM?
Sent from my Atrix with XDA Premium
Thats is what i was going to try next, i havent got to it today.
Are you flashing plugged in? Try flashing the rom without having your phone plugged in.
Also, if you're at the M logo screen, I suggest waiting it out for quite a while. Be patient. I used to think when I flashed roms that I was stuck at M logo, but I just wasn't waiting long enough, especially coming from a full wipe.
Otherwise, try doing a battery pull and then putting it back in and booting it up.
You can also try using Nottachtrix with the installer? I've heard that fixes a lot of people's problems that are getting stuck at logo screen.
well right now it seems that the battery is dead and wont charge....
So im not sure what im gonna do about that
Ok so im installing NottachTrix now will report how it went when done.
Also about leaving it on to boot, i did that for 24 hours, nothing happened
Edit:
It seems to be working so far. The phone is stuck at a charging screen with a battery icon, much more than it was before.
dfanz0r said:
Ok so im installing NottachTrix now will report how it went when done.
Also about leaving it on to boot, i did that for 24 hours, nothing happened
Edit:
It seems to be working so far. The phone is stuck at a charging screen with a battery icon, much more than it was before.
Click to expand...
Click to collapse
Wipe cache partition, wipe data, wipe delvik. Install Rom (cm7). Reboot recovery. Install gapps. Reboot now. If it's not working perhaps you cwm is outdated?
Sent from my MB860 using xda premium
NottachTrix works fine so far, my battery just needed to charge some.
(SOLVED) hello neighbors. I am having an issue... my atrix will only boot if i install honey atrix on it. i have tried many other roms. many different times. i have wiped all data cache partitions, dalvik, battery stats, formatted system, dat, cache. And still i can get nothing to boot besides Honeyatrix rom.
it seems to load them from the zip file ok just wont boot past the unlock dual core screen. i have let it set for 10-20 min to see if it will boot and nothing.
i had recieved this under warranty and it was shipped with the new 2.3.6. 4.5.91 and i rooted and unlocked using the unlock tool v.4.
any help with this would be greatly appreciated
thanks in advance,
SErooted
Try a full wipe with fastboot before flashing. Also may need to flash appropriate kernel. What ROM's have you tried?
Sent from my MB860 using xda premium
ive tried cherry pie, algorythm, cm7, neutrino, miui many of them, and i have never had this problem with my other atrix. just this one doesnt seem to be want todo anything but this one rom. and i have done a full wipe in moto fastboot as well. i forgot to mention it earlier.
SErooted said:
ive tried cherry pie, algorythm, cm7, neutrino, miui many of them, and i have never had this problem with my other atrix. just this one doesnt seem to be want todo anything but this one rom. and i have done a full wipe in moto fastboot as well. i forgot to mention it earlier.
Click to expand...
Click to collapse
Which recovery are you using?
Maybe install it again or try another one, perhaps its not installing properly
Sent from my MB860 using xda premium
i have used cwm and tefnars recovery. i have installed each rom several times and still no change. it will only boot into honey atrix rom. i am really wanting to put miui back on and i have checked the latest by stevend25 ( sorry if spelled wrong) and i can go through the set up process but upon reboot, it wont boot past the startup screen.:-(
Damn replacement device!!!
Seriously people>>>> not one of you has insight on what the problem may be? i am not new to this phone or modding it and this is the first time ive ever had a problem and the community cant help?
PATHETIC!!!
Just wait somebody will answer you, be patience. If u act like this, sure nobody won't help you.
Inviato dal mio Atrix con Tapatalk
SErooted said:
Seriously people>>>> not one of you has insight on what the problem may be? i am not new to this phone or modding it and this is the first time ive ever had a problem and the community cant help?
PATHETIC!!!
Click to expand...
Click to collapse
Since it was almost 2 weeks between the last post trying to help you and your posts yesterday it's pretty safe to say everyone thought you had solved your problem and moved on. After this latest post, it's probably also safe to say you won't receive any more help.
SErooted said:
Seriously people>>>> not one of you has insight on what the problem may be? i am not new to this phone or modding it and this is the first time ive ever had a problem and the community cant help?
PATHETIC!!!
Click to expand...
Click to collapse
You are not entitled to help from anyone. Keep that in mind while making future posts. Always be kind and respectful to other members in the community.
SErooted said:
i have used cwm and tefnars recovery. i have installed each rom several times and still no change. it will only boot into honey atrix rom. i am really wanting to put miui back on and i have checked the latest by stevend25 ( sorry if spelled wrong) and i can go through the set up process but upon reboot, it wont boot past the startup screen.:-(
Damn replacement device!!!
Click to expand...
Click to collapse
your recovery is the problem install rom manager from market and update cwm or try romracer recovery.
Could also be the baseband radio. If that doesn't fix, looks like its time for the dreaded sbf.
Sent from my MB860 using XDA
I would also use the latest romracer recovery or twrp from here http://forum.xda-developers.com/showthread.php?t=1400641. Also be sure to use appropriate kernel for the rom you are flashing and try the stock clocked kernels first. Good luck.
Sent from my MB860 using XDA
hmmmm I wondering on this one if his internal might be mal-partitioned.. I had this problem and was cured using mini tool partition wizard. Start off by making sure all's formatted fat 32 primary. Once you're assured of that, format again, fastboot - w and reinstall something like neutrino. Twice for good measure. Boot it , wait 60 seconds, pull battery and reboot. Lemme know bro if that helped..
Sent from my SGH-I997 using xda premium
How to make atrix's internal partition (system, osh, etc) to be detected by mini tool?
Sent from my MB860 using xda premium
Thank you all for your insight. Im happy that you have responded. Please forgive my frustration. It just has been annoying to keep this software on my attic as there are other Toms I enjoy. Ill let you all know how it goes
Sent from my MB860 using XDA App
i had wondered if this was the problem but i have tried cwm from market and tefnars recovery and had the same issue with both.
Thank you for your ionsight into this. it really has been bothering me.
ok everyone.... thank you all for your help in getting the matter resolved. it was an issue with recovery and i am now running with twrp instead of cwm or tefnar. miui is now running and am going to see what kinda fun i can have with it. Thanks again everyone!!!