Related
I have recently returned to my apartment with my brand new archos 70. I use WPA2-PSK encryption for my wifi network. at first everything was golden, I could browse the web and whatnot just fine. as of a few days ago, wifi has not been working correctly. my device connects to the network (pulls an ip address from the router) but when I try to browse web pages or open web based apps they hang up and act as if I have no connection. it works fine on other networks (to limit the problem to my network) I have tried doing a factory reset of the device, tried power cycling my router and modem with no luck. I have also changed encryption types to no avail. i have the latest firmware for the gen 8 series. also from time to time during this session of events, sometimes it will connect to the router, then disconnect and reconnect. I have no clue whats going on because I havent changed any router settings since I got back. the only other devices on my wifi network are two laptops. any help would be appreciated.
you mean you restored to the factory settings ran through the start up all over again and it still won't connect to your router? have you tried any other types of connections or routers?
I had this problem just the other night was this close to reformatting the whole thing. but I solve the problem by turning the device off, then holding the reset button while it rebooted to turn it off again, an reinitializing the drivers.
how do you reinitialize the drivers? I did a factory wipe. and it connects, it shows as having network connectivity (even my router lists it as a dhcp client and currently making use of the access point) but no internet functions work. ive connected to other networks fine.
This happened to me when I first got my A70. What I had to do to fix it (after getting incredibly pissed, reformatting twice, and almost returning the thing) was to set it up to use a static IP address on my home wifi network. Don't know if it'll solve your problem, but it works beautifully for me and I'm able to enjoy the device now.
Just remember to uncheck "use static IP address" when you get on other wifi networks.
well, I set up static addressing, gave it a private ip, set up the gateway and dns, and it still wont connect to anything.
If set as wireless N, set as N+G or G only, latest firmware may have trouble connecting to wireless N networks.
na, I dont have it set to n, I have it set to auto which I believe puts it to g with my archos. thing is, it used to work. now it suddenly has problems.
Im beginning to wonder if the archos tablets are just picky about wireless routers. I wouldnt think so...
Upgrade the firmware
Archos published a firmware upgrade to solve this problem (December 2010). The related bug in the release notes is...
Wi-Fi: fix Wi-Fi stuck after a while when using WPA2/AES encryption mode
The new firmware download link is in the Archos website.
you can download the firmware to your computer, copy it to the root directory of the tablet using the USB cable, and run the upgrade process in the tablet.
... or you can use another WiFi network (without WPA2/AES) and download the update in the same tablet
Note: I cannot send the links, however you can use the information to search the links in the internet.
Hi just received my GTablet and have installed ClockworkMod v08. Next, I am attempting to install the TNT Lite Rom but I am having trouble connecting to my home router.
The response I keep getting when trying to connect is to the point of "Obtaining IP address.." then it disconnects. I am sure it's not the wireless router but just to be eliminate possibilities, I've even switched off all the security with connect to the router, but the sames results. It keeps trying to re-connect. I can easily connect with my other PCs and printers.
Any ideas? Thanks in advance.
Hello there,
did you ever solve your wifi problem, I am currently running the latest TnTlite, and this just started happening to me as well. It just hangs in Obtaining Ip then it disconnects.... I have never had this problem before in fact was online on the tab last night, now it seems i cannot connect... I will see if I can connect in another location hope nothing happened to the Tab..... BTW I tried restarting as what was suggested but that did nothing for me also....
Are you broadcasting your SSID?
Can you take the tablet somewhere else and try connecting at a Star Bucks, or a library, or something. See if it connects ok there?
Also, if it doesn't connect anywhere. Try flashing a different ROM to see if it is just that one.
I've had the same problem. I do not seem to be able to connect to any wifi that is encrypted with WPA. At work, we are WPA and I cannot connect at all. At home, I have WEP and can connect. I thought it might be something with the wifi settings on the tab, and have searched and searched and cannot find anthing.
By the way, this is my third tab and none of them could connect to a WPA encrypted router. The first two I returned as defective. IF there is an answer, I would love to hear about it.
Also, this is my first android device. I have been messing with Windows phones for a long time...thanks to the great people on this site.
Sorry to hear about your wifi problems. Just to let you know my experiences, I've (in the week I've owned my tablet) run TnT, VegaN and cyanogen (latest of each) and have never had a problem connecting to my home wifi - I do not broadcast my SSID at all and use WPA2/PSK encryption. You both mention WPA - can either of you try WPA2/PSK?
But on saying all of that, if you can't even connect to your wifi point without any security involved, it sounds either:
1) Hardware - faulty tablet but you said you're on your third so that sounds unlikely. Remember, while the tablet supports wifi G/N it does so over 2.4Ghz so if you have a router that only does 5Ghz or is set to work exclusively over 5Ghz, your router will not see your tablet
2) Software related - Have you reflashed your kernel at all? Did you possibly install a kernel (not rom) that does not have wifi drivers installed or something similar?
I hope something above might help you....
I was never able to connect to the wireless router. I shut all the security off, reset the router, rebooted the tablet but still the same results, "obtaining IP address" then it fails and tries again. I could connect to my neighbors Linksys so I know the tablet wifi is ok. I also so know that the router was ok since it had been serving my other PCs & printers for a number of years. It just wouldn't connect to each other.
The problem still persists.
+++++++++++++++++
Running TNT Lite 4.2.1
bevbeng said:
I was never able to connect to the wireless router. I shut all the security off, reset the router, rebooted the tablet but still the same results, "obtaining IP address" then it fails and tries again. I could connect to my neighbors Linksys so I know the tablet wifi is ok. I also so know that the router was ok since it had been serving my other PCs & printers for a number of years. It just wouldn't connect to each other.
The problem still persists.
+++++++++++++++++
Running TNT Lite 4.2.1
Click to expand...
Click to collapse
You didn't answer in your response above, is your router a 5Ghz router or 2.4Ghz? Could the frequency of your router be causing your problem here? Remember the tab only supports 2.4Ghz frequencies
1. if your tablet can connect to your neighbor's router, then problem lies between your router and the tablet.
2. is your router a linksys? what wireless router are you trying to use?
3. are you using mac address filtering? is dchp enabled on the router or by some sort of home server?
4. your tablet can see your router, but for some reaon they cant agree on how to talk to each other. i'm on a linksys wrt54gsv4 and havent had a problem, not with default settings or wpa2 or mac filtering or the custom firmware i eventually installed on it (ddwrt), tomato)
Sent from my GTablet-TnT-Lite using Tapatalk
bevbeng said:
Hi just received my GTablet and have installed ClockworkMod v08. Next, I am attempting to install the TNT Lite Rom but I am having trouble connecting to my home router.
The response I keep getting when trying to connect is to the point of "Obtaining IP address.." then it disconnects. I am sure it's not the wireless router but just to be eliminate possibilities, I've even switched off all the security with connect to the router, but the sames results. It keeps trying to re-connect. I can easily connect with my other PCs and printers.
Any ideas? Thanks in advance.
Click to expand...
Click to collapse
You are ATTEMPTING to install TnT ROM? You dont need the Internet connection, just sideload it then install. Am i Right?
Then after you install the TnT rom, sideload also the Kernel TnT base with wifi fix.
http://forum.xda-developers.com/showthread.php?t=895825
Hope this will solve your problem.
Good luck
powercrazy said:
You didn't answer in your response above, is your router a 5Ghz router or 2.4Ghz? Could the frequency of your router be causing your problem here? Remember the tab only supports 2.4Ghz frequencies
Click to expand...
Click to collapse
I have an older Microsoft 2.4Ghz B/G wireless Router. I'll try to sideload the Kernel TNT base with the WiFi fix.
Thanks for the tips.
Since the original posting I have got TNT Lite installed (using my neighbors router)
bevbeng said:
I have an older Microsoft 2.4Ghz B/G wireless Router. I'll try to sideload the Kernel TNT base with the WiFi fix.
Thanks for the tips.
Let us know if it solve. If not, I think you have defective unit.
Goodluck!
Click to expand...
Click to collapse
Something else occurs to me out of pure ignorance. I'm not sure how Android stores profile information. But I know with both mac and windows I've had occasion where "forgetting" the network and letting the device rediscover it has solved problems.
It sounds like you've been down that road already. However, it does bear asking. It's the more obvious things we often forget to consider.
Well it looked like the tablet needed to be reset a couple of times as i was just online with it... now the tab just froze, shut off and now i cannot turn it on... off to another thread to see what to do now... god i hope this thing is not bricked....any suggestions on what is a good thread would be appreciated... off i go.......
edit: found a thread now to find the internal reset button. thanks to all at xda....
RyuFDAC01 said:
Well it looked like the tablet needed to be reset a couple of times as i was just online with it... now the tab just froze, shut off and now i cannot turn it on... off to another thread to see what to do now... god i hope this thing is not bricked....any suggestions on what is a good thread would be appreciated... off i go.......
edit: found a thread now to find the internal reset button. thanks to all at xda....
Click to expand...
Click to collapse
Try to hold the power button for a long time and maybe it may turn back on. Before doing your last resort (disecting the tablet).
I had a problem with my wifi going into loops when I first got the unit. It would show it connecting/disconnecting/connecting/etc as described in the first post.
I had another router (both the same makes - Linksys WRT54G but different model numbers) so I tested the other router and I connected fine. I haven't gone back to test the first router yet and I am using the 2nd one.
The router I couldn't connect to has DD-WRT micro on it, and I haven't had problems connecting other wireless devices to. The one that is working fine with the g-tablet now has Tomato on it (it is a lower version number which supported Tomato).
Too bizarre... I now have this problem.
I received my gtablet today and installed clockwork mod recovery and vegan-tab ginger RC 1. Or, essentially, I followed the instructions here and got everything working. http://forum.xda-developers.com/showthread.php?t=865245
Wifi worked fine until the evening. Wifi is on, and in the settings under the SSID of my wifi network, it says Obtaining IP address for a minute until it says Disabled, network in range. I've done some common trouble shooting, like restarting, turning wifi off and on, forgetting the network and reentering password. That didn't work. My cell phone has a mobile hotspot feature and the gtablet CAN join that. I wonder what gives... I hope someone can help.
(This could be just coincidence, but it's about when I powered up my desktop computer. The desktop connects to the internet through a DMZ router that has a wired connection to the wifi router in another room. The desktop is now off and the gtablet still has this problem.)
Ok. Resetting my router fixed it. I never thought that my router could just "dislike" one particular device. I thought for sure something had to be wrong with the device. Forgive my ignorance!
G Tablet Wifi
I do not transmit my SSID and this has never been a problem with any of our laptops or netbooks. When I first received my G Tab and tried to connect to my network, even though I had entered the SSID and Passphrase correctly, it still would not connect. As soon as I set my wireless router to transmit the SSID the G Tab connected without any problems.
This is the first time I've encountered a problem of this nature. Comments?
This is what worked for me. I posted this in a similar thread as well.
Hey, I had WiFi connection issues too. I just got a Viewsonic G-Tablet with the Android 3.0 OS and have a D-Link DI-524 wireless router. It could see router and would try to connect, but would cycle and never connect. I could try to connect to other available networks in the area. It connected fine to an unsecure network, and when I tired to connect to secure networks there was a place where I could enter a network key/password. However, I noticed this option was not available on my network when I tried to connect. I reset my router which did not help. I then chose the option to add a network on the tab. This worked!! I was able to enter the key from the add a network option. I then told the "bad" connection to be forgotten. Hope this helps someone else, as I had looked on the internet for awhile for an answer. I was about to buy a new wireless router too!! Oh, I am using WEP too.
edit: ok when I power my tablet back on the same issue was happening. This time I could enter a network and the cycling still contiuned. I even forgot and re-entered the network. The fix this time was to reboot the tab. However, my internet has been acting up lately so IDK.
Hey. My phone arrived today and so did the problems.
I have a wireless router(Asus W530G-V2). The internet runs great on my PC
Just before I went to school I could see my Wireless Network's name but I couldn't connect to it. It simply said Connecting... over and over again. The interned didn't work. Now I got home and and I can't even find the network. If I manually add it it's out of range.
Can someone help me?
Thanks.
edit: once in a while i get a weak connection (tp-link_b22866) that also doesn't work.
lol. check if ur asus router supports wireless internet. does it have an antenna or something?
Yes, it does. My sister used the wireless to use internet on her laptop.
It's possible that you could have entered the wrong password the first time, that would result in the connecting loop you mentioned, as for it not being visible I'm not sure why that would happen unless the SSID of the router is being masked, an idea might be to go to maccas and test your phone using the wifi there maybe? If nothing else connecting to another network would help us diagnose the problem.
I did a factory reset but still, the phone wouldn't see any network.
I'll try adding a wireless card to my PC and see if it receives any signal from the router.
If not, I gotta set up the router somehow.
Thanks.
check if ur router is compatible with the dd-wrt custom firmware. if its compatible flash it on ur router, it will solve all the problems.
or
try this
Small utility that allows you to adjust the transmitter power of WiFi, thus can be great help to save battery life.
Has been done 5 hard dimmer. The apartment is missing 4 or 11 dBm for normal operation. Battery consumption with this sometimes falls on the 60-100 mA.
Nope, dd-wrt is not supported
And I can't install the apk since I don't have internet access therefore I don't have Astro File Manager.
ok try this.
find out ssid broadcast name of ur router from ur sisters laptop.
ask her if its password protected. if yes, get it from her somehow.
then on ur phone do this,
Settings>Wireless & network settings> Wi-Fi settings
turn on the wifi
and select add Wi-Fi network
enter the ssid name in there.
if needed enter that damn password and save it.
voila!
I've tried that but below the network name it says "Out of range".
And my sister ain't here. I don't know if it's my phone that isn't receiving the wireless signal or if it's the router which isn't sending. I'll go later today in a place with hotspot.
Images of the router's settings. maybe there's something wrong here:
http://imgur.com/iJu8n&6TIsH&rkcJk&rKvub
maybe ur sister needs all the bandwidth and blocked ur phones mac id on the router lol
I said above that my sister isn't here now. It's only me so no one is using the wireless.
From what I can see there it's possible that the security on the network could be set to filter MAC addresses, I'm not sure if that is the problem, however at this point I'm not sure what else it could be...
Nah, it's not that.
I've messed around with it(to accepts the phone's MAC, disabled) but still won't work.
I'll go to a mall or somewhere to see if the phone's the culprit here.
Went to the local library and wifi worked smoothly. I've downloaded all the apps I needed(especially Astro file manager). So the router was the problem from the beginning.
Thanks anyway.
Well I'm glad it's not your phone that's the problem, hope you like your 01 and that you get your router working.
Hi,
can you check on which wifi channel your router sends. On my P500 I also don`t see a wifi network above channel 11.
By the way I`d like to know how to enable these channels with my Cyanogen 7.0.2 beta 6.5. I know that there must be some possibilities..
see: http://forum.xda-developers.com/showthread.php?t=576575
Hi, is anyone has the same problem? When I'm connected at home to my Tenda router (WIFI b/g/n) after cca 30 min. my phone WIFI stops sending and recieving data, Skype is offline, etc... but WIFI in phone is stil switched on. After I switch WIFI off and back on (on my Samsung, not on my router), everything works good for a while and after cca 30 min. is situation the same. Is there in Samsung any WIFI sleep mode or something like that? Or some settings, which is not visible? Any other suggestions? Sorry for my poor English. Thanx in advance.
I'm having the same problem. But I did a factory reset and it works fine afterward.
And just few hours ago, I encountered this problem again. What did to get this error was, I pressed "on samsungapps" and it failed to update and thus results wifi connection stopping. What about you? Also my Kies air is not working.
are you guys sure you have wifi sleep policy set correctly? just to be sure, settings, wireless, wifi, menu button, advanced, wifi sleep policy to NEVER.
Yes. And also even if i manually disconnect and reconnect the wifi back. The data still doesn't come in. It is stated there as connected but no data at all.
Somehow Wifi keeps searching every few seconds, even thought it's connected.
This is bound to cost in battery life too.
I have reseted router to default settings, disabled n mode, disabled security (only mac filtering is on), disabled all unnecessary features and PROBLEM IS SOLVED !!! Thanx God Tomorrow I will experiment with router settings to know, what was causing this error ;-)
Well at least u're connected, I'm facing the same problem as the thread starter. No data flow at all. Browser showing me offline msg. I had the same problem on the 1st day with the phone after I woke up. previously playing with most of the default aps. So i'm not sure what went wrong, did a factory reset and it works fine.
Until, few hours ago, I tried my kies air which didn't work. Browser couldnt load the address given. And I thought i had an outdated kies air, so i went to click on samsungapps, which failed to update me. At that point the wifi is still working, i leave my phone for about 30 mins, and when i came back. The same problem which happened on the 1st day came back. I was hoping to find an answer here so I didnt do the factory reset it. On another note, the phone wifi works after restart, but wouldn't last.
Edit: The wifi works after i resetted my modem to default. oh well. at least that solved it.
lukecz said:
I have reseted router to default settings, disabled n mode, disabled security (only mac filtering is on), disabled all unnecessary features and PROBLEM IS SOLVED !!! Thanx God Tomorrow I will experiment with router settings to know, what was causing this error ;-)
Click to expand...
Click to collapse
Hi,
Did you find out what setting was causing the connection issue? I also have this problem with my Tenda router. I thought it might be the wireless N, but disabling that doesn't fix it. I have a wireless distribution system set up with other tenda routers so didn't want to disable all the settings to troubleshoot if i can help it!
Thanks
spen2 said:
Hi,
Did you find out what setting was causing the connection issue? I also have this problem with my Tenda router. I thought it might be the wireless N, but disabling that doesn't fix it. I have a wireless distribution system set up with other tenda routers so didn't want to disable all the settings to troubleshoot if i can help it!
Thanks
Click to expand...
Click to collapse
I have the same problem, my router is N and the conection between SGS2 and my router is bad. Any idea?
Same problem here, I'm running WZR-AGL300NH in access point connected to my Ubuntu Server. Everything else works in the house just fine but SG2 stops transmitting data after a while.
I recently upgraded to KF1 firmware (and unknowingly wiped out whole phone, being on the bleeding edge and that didn't seem to help.
I would very much appreciate all tips because this problem is very annoying!
Additional Info:
- Buffalo is running latest firmware
- Authentication WPA2-PSK
- Encryption AES
paranoidi said:
Same problem here, I'm running WZR-AGL300NH in access point connected to my Ubuntu Server. Everything else works in the house just fine but SG2 stops transmitting data after a while.
I recently upgraded to KF1 firmware (and unknowingly wiped out whole phone, being on the bleeding edge and that didn't seem to help.
I would very much appreciate all tips because this problem is very annoying!
Additional Info:
- Buffalo is running latest firmware
- Authentication WPA2-PSK
- Encryption AES
Click to expand...
Click to collapse
Same symptoms here. Cisco DDR2200. WPA2 PSK. Haven't tried fiddling with the router yet.
This seems to be a common problem. Anyone knows of a definitive fix?
Bump...I have the same problem and the issue persists even after i reset the phone
Sent from my GT-I9100 using XDA App
Glad I found this, thought it was the ROM I had flashed to the phone (which is VillainROM)
I keep losing connection from my phone via wifi like everyone else in this thread
edit: I've just assigned my phone an IP address via my routers settings and I can connect to the net again
Also when it wasn't working, I couldn't ping the phone. When I assigned the IP just now I still couldn't ping it.
When I did a tracert to it, I could get to it when the IP was assigned and when it wasn't.
I have no removed the assigned IP for the phone from the router. Wifi connection is still working after disconnecting/reconnecting wifi on the phone.
I can also now ping the phone, where as before it was getting timeouts.
Also when it wasn't working the first time when I did a tracert it was showing up as HPsomething (didn't make note of the numbers)
this time when it is working it's just showing up as the IP address when doing a tracert.
Another update:
Just checked my printer, it has an IP address manually set on it, which at one stage when the phone wasn't working for internet it had the same IP as the printer, hence when tracert'ing it I was going to the printer instead of the phone and getting the HP etc back.
When it wasn't working at that time and looking at my routers DHCP list, it had the MAC Address of the phone against the IP that the printer has....
So I've got some issues with how my own network is setup ^_^ which looks like is causing me grief.
So the issue is with DHCP? Setting a static IP fixes it? I'll have to try, but I doubt this is a problem with the network, as all my other devices use DHCP without this problem.
I have the exact same problem!!
It's really annoying.
i was having problems with wifi too.. it keeps scanning and checking, etc, signal dropping for no reason..
fixed mine..well for me it worked
backup ur phone ( i dont take responsibility if ur phone catches fire or dies or chases u around )
u need to be rooted
download FXR WiFi fix and rescue from market
and just run the app.
now my wifi signal stays constant speed and i get good speeds
alternatively try
WiFi Fixer
both of them will cause high battery usage..i think since it keeps the signal at maximum.. so only enable wireless when i need it or use juice defender or green power.
greenpower seems great. using this at the moment
I seem to be having some problems with my tab gray 16 gb wifi version.
When i started it for the first time it could not find my wifi, i went ahead with setup and when i was finished i looked into wifi settings and it had found my router.
A few days went by and all of a sudden i was connected to the router but had no internet connection, I checked my computer which was connected by wire and it had internet connection. I then tried to switch wifi on and off on the tab and since then i cannot find my router.
I've tried rebooting both router and tab and it has not resolved the problem. Anyone else experiencing these issues? Any solutions? I thank you all in advance.
btw the router is a D-link dir-655
Anaximandros said:
I seem to be having some problems with my tab gray 16 gb wifi version.
When i started it for the first time it could not find my wifi, i went ahead with setup and when i was finished i looked into wifi settings and it had found my router.
A few days went by and all of a sudden i was connected to the router but had no internet connection, I checked my computer which was connected by wire and it had internet connection. I then tried to switch wifi on and off on the tab and since then i cannot find my router.
I've tried rebooting both router and tab and it has not resolved the problem. Anyone else experiencing these issues? Any solutions? I thank you all in advance.
btw the router is a D-link dir-655
Click to expand...
Click to collapse
Unplug the router and plug it back in. I have experience this issue as well. My desktop was able to connect to the Internet. But my laptop won't connect through wireless. Not even my wireless printer. I unplugged it and plugged it back in, and it works fine. Sometimes, it's other way round.
Sent from my GT-I9000 using XDA Premium App
I have the same router and I don't have any problems connecting. I did have many problems with my OG Droid phone connecting though, until I switched from WEP to WPA encryption.
Can you see the router on your Tab, but it just won't connect? Or is it not visible at all?
I have tried unplugging the router leaving it unplugged for 30 sexonds or so and then plugging it back in, no luck. And no I cant even see the router, I see lots of routers but not mine, I can connect to my phone using mobile access point but just not my router
Does your router use a hidden SSID?
Anaximandros said:
I seem to be having some problems with my tab gray 16 gb wifi version.
When i started it for the first time it could not find my wifi, i went ahead with setup and when i was finished i looked into wifi settings and it had found my router.
A few days went by and all of a sudden i was connected to the router but had no internet connection, I checked my computer which was connected by wire and it had internet connection. I then tried to switch wifi on and off on the tab and since then i cannot find my router.
I've tried rebooting both router and tab and it has not resolved the problem. Anyone else experiencing these issues? Any solutions? I thank you all in advance.
btw the router is a D-link dir-655
Click to expand...
Click to collapse
This might sound funny, but do you have anything else connected to the WiFi? My router sometimes does this same exact thing and it happens to do with the traffic going through it. It happens alot when I'm using my laptop and my Xbox 360 and I turn off my Xbox for some reason. The way that I've always found that fixes it, is by rebooting all my connected devices along with rebooting my router. It's as if their is a conflict with the connections that make it not work.
No hidden SSID and at the moment nothing is connected to my router wireless
edit: Solution! logged in to my router switch of wi-fi, turned it back on, enabled wpa2 security and there it was right on my tab, welcome back old friend
I had the same problem, but solved it by changing locale setting on my router from Czech Republic (where I live) to USA.
figure out how many devices are connected to your router. My router can hold only five devices at a time. Also change the channel in your router settings.
good to know problem is solved
Please use the Q&A Forum for questions Thanks
Moving to Q&A