Hi.
I have a OUKU P800 and works perfecto with both sims and everything. nonthheless the problem is that memory fills out to quikly. so i want to root it so I can get the posibility to encrease the rom memory.
It uses the 2.2.2 version.
Ive been reading about the "gingerbreak", the problem is that i dont know how to hard reset the phone in case it doesnt works.
Can anybody help me?
Thanks
Javier (form argentina)
javiermattera said:
Hi.
I have a OUKU P800 and works perfecto with both sims and everything. nonthheless the problem is that memory fills out to quikly. so i want to root it so I can get the posibility to encrease the rom memory.
It uses the 2.2.2 version.
Ive been reading about the "gingerbreak", the problem is that i dont know how to hard reset the phone in case it doesnt works.
Can anybody help me?
Thanks
Javier (form argentina)
Click to expand...
Click to collapse
Have you try holding the power, vol- , and home button while is off???
---------- Post added at 06:05 AM ---------- Previous post was at 06:00 AM ----------
Hi i got the Ouku P800w Got it for a week now and the phone just won't boot anymore... anyone know the problem?? i'm thinking that the phone have lost the android 2.2.2 in it thats why is not booting... if anyone know how to fix this please let me know
process com.android.setupwizard has stopped unexpectedly
Hello everyone, I had a very serious problem since last week with this ouku p800w and I don't know how to solve it..
My cell is rooted and have the android version 2.2.2.
Last week when I went to charge my smartphone and I powered on, has appeared this message:
""The application Setup Wizard (process com.android.setupwizard) has stopped unexpectedly. Please try again"
And now I can't do anything, I see only the notifications bar and a black screen.
I don't know if this could be helpfull but i have these file (process com.android.setupwizard.tar.gz ; process com.android.setupwizard.apk.gz ; process com.android.setupwizard.properties) in a backup made by titanium.
Please I really need help I don't know what to do.
Thanks in advance.
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Related
Well i hope this is the right place to ask for a new section. I am requesting the Moderator/ Admin to assign a new section for the worlds Cheapest tablet. which is known as Aakash tablet. There are about 1.4 Million tablets pre ordered and is a huge hit in india. And given the specs that it has it is worth every dime. So i dont find any reason not to assign a section to it and have some further development for it. Hope the admins take this into consideration and assign a section to it.
Second that!
Aakash sucks, but it's successor UbiSlate 7 is gonna be a hit in India and it deserves a seperate forum.
Ubislate 7+
hey,
I do own a Ubislate7+ Tablet manufactured by Datawind. It has Android OS 2.2.2
can anyone help me with porting some other version.
Is there any thread assigned for Ubislate7+ ?
B2_ani said:
hey,
I do own a Ubislate7+ Tablet manufactured by Datawind. It has Android OS 2.2.2
can anyone help me with porting some other version.
Is there any thread assigned for Ubislate7+ ?
Click to expand...
Click to collapse
Hi,
How is your experience with Aakash.
Experience with Aakash (Ubislate 7+)
vinodkbishnoi said:
Hi,
How is your experience with Aakash.
Click to expand...
Click to collapse
Overall experience is not very good but just OK.
Although its not worth for the purpose it was developed for, but i think its worth the price (2999/-).
It has some very good features like Telephony support (although an external microphone is must), and USB Port for directly inserting pen drive; but still a good design is lacking.
The memory card always bulge out so much that u can't keep the tablet with memory card in it. U have to remove it.
Similarly while reading ebooks from the pendrive, the fixed layout direction forces u to keep the tab hanging in air.
The device's resistive touch-screen try to resist the touch itself . . .
Operating system is not optimized properly for running on Ubislate as:
- although no Bluetooth hardware is there but still there is an application bluetooth sharing can be found active.
- Google Play is not there, but pre-installed applications (like games) when tried over with some network related options throws error of not being able to connect to Play Store.
Device heat-up and low battery backup is definitely a problem which prevents it from being used as a regular mobile phone.
The device requires resets very frequently (i face this problem basically when i leave it (in a switched on mode) on charging for few hours).
. . . and the most important of all is the inefficient technical support staff. The experience is really not good. For any kind of problem they have a fixed solution - "resetting the device and that too with the only a SAFETY PIN". If by chance that doesn't seem to work, then hard-rest . . .
Aakash 2
Does anyone have specs for this? I have an Allwinner A10 LY-F1 tablet that looks identical in every respect and am curious whether they have the same internals. Thanks!
---------- Post added at 11:49 AM ---------- Previous post was at 11:47 AM ----------
nm_guy said:
Does anyone have specs for this? I have an Allwinner A10 LY-F1 tablet that looks identical in every respect and am curious whether they have the same internals. Thanks!
Click to expand...
Click to collapse
For reference: http://www.pandawill.com/lyf1-advan...d-40-1gb-ram-8gb-2160p-hdmi-black-p60782.html Mine's white, but otherwise the same.
No network coverage onubislate7c+
I am new to this community. I got ubislate 7c+ tab with sim function.
I have done factory reset on my tab after that it doesnt shows network. I have tried all company's sim cards but it does not work.All other functions are working properly only it does not show network so i cant use the calling function and gprs. I have called customer care they told me to use reset button, I have done that also but no use also the inbuilt browser i.e ubisurfer shows that "the device is not registered error 0001"
Please help me what should I do? I am so helpless right now? does my money wasted or what?
praphullawagh said:
I am new to this community. I got ubislate 7c+ tab with sim function.
I have done factory reset on my tab after that it doesnt shows network. I have tried all company's sim cards but it does not work.All other functions are working properly only it does not show network so i cant use the calling function and gprs. I have called customer care they told me to use reset button, I have done that also but no use also the inbuilt browser i.e ubisurfer shows that "the device is not registered error 0001"
Please help me what should I do? I am so helpless right now? does my money wasted or what?
Click to expand...
Click to collapse
hey due chillax just go to setting then below wifi and usage select more in more go to mobile network and then select select automatically
even i had dis prob but i fixed it and if dat does not work try poweroff remove sim and reinsert afte 2mins and reinsert and start it once it starts goto ubi info and fill in d info dis will get u network for sure
klamper said:
hey due chillax just go to setting then below wifi and usage select more in more go to mobile network and then select select automatically
even i had dis prob but i fixed it and if dat does not work try poweroff remove sim and reinsert afte 2mins and reinsert and start it once it starts goto ubi info and fill in d info dis will get u network for sure
Click to expand...
Click to collapse
i have tried it.no use
Also at startup it shows that "unfortunately ubiinfo has stopped"
Call them and ask for a refund
Sent from my HTC Explorer A310e using xda app-developers app
ubislate 7c+ software
praphullawagh said:
I am new to this community. I got ubislate 7c+ tab with sim function.
I have done factory reset on my tab after that it doesnt shows network. I have tried all company's sim cards but it does not work.All other functions are working properly only it does not show network so i cant use the calling function and gprs. I have called customer care they told me to use reset button, I have done that also but no use also the inbuilt browser i.e ubisurfer shows that "the device is not registered error 0001"
Please help me what should I do? I am so helpless right now? does my money wasted or what?
Click to expand...
Click to collapse
i was also having the same problem,the service centre people send me the mail
it is to reload the ubislate 7c+ fully,if you want then send me mail on [email protected]
i will forward their mail,which includes the programm and reset the tab in original condition,afterdoing this all your personal content will be deleted so take the back up before doing the formate:good:
pranjalshah said:
i was also having the same problem,the service centre people send me the mail
it is to reload the ubislate 7c+ fully,if you want then send me mail on [email protected]
i will forward their mail,which includes the programm and reset the tab in original condition,afterdoing this all your personal content will be deleted so take the back up before doing the formate:good:
Click to expand...
Click to collapse
Please send me the mail my email ID is [email protected] and also the alternate email ID is [email protected]
How did you pursue them
pranjalshah said:
i was also having the same problem,the service centre people send me the mail
it is to reload the ubislate 7c+ fully,if you want then send me mail on [email protected]
Click to expand...
Click to collapse
How did you pursue them? We are trying to get the firmware for 7ci and 7c+, they are not responding.
I guess this device needs a lot of development, the hardware is good for the price, it will be great if we can produce stable roms for the device,
Moderators please look into this and create a forum for the device asap..
Sent using xda app-developers app
Thanks for ur info.would u forword mail to me ...plz. also i have same problem,([email protected])
Sent from my Lenovo P770 using xda app-developers app
i have the same problem
bro i have a ubislate 7c+ edge camera at corner right side and board version is sa86v-a13-2g v1.3 please send me the email thanks my email id is [email protected]
Ubislate 7CZ
hey i have a ubislate 7CZ. Can you provide me its stock rom and some custom recovery for it???
Custom recovery
spjain said:
hey i have a ubislate 7CZ. Can you provide me its stock rom and some custom recovery for it???
Click to expand...
Click to collapse
Hello,
the custom recovery for 7CZ is needed badly..!!
If any dev's do have it, or can port it..please do help...!!
HOW do you access the stock recovery..??????
UbiSlate 7C+ Edge - Camera Related .....
Hi All,
I have a ubislate 7c+ edge (Single Camera at right Upper Corner) with Board ID sa86v-a13-2g v1.3
I am asking for a Fully Working ROM (Including Camera) - Till this point I have Managed to Get it Up & Running Using 1680 MXC622 siv121d ROM and managed wifi as well with rtl8723ak.ko module !
My Only problem is Camera : It has a single camera probably sp0838 or gc0308 or similar . All I need is a camera.cfg (from /etc) and a script.bin from an original working device along with relevant modules if possible or else kindly help me on a possible solution for this.
Thanks in advance & in anticipation :fingers-crossed:
---------- Post added at 02:06 PM ---------- Previous post was at 01:45 PM ----------
pranjalshah said:
i was also having the same problem,the service centre people send me the mail
it is to reload the ubislate 7c+ fully,if you want then send me mail on [email protected]
i will forward their mail,which includes the programm and reset the tab in original condition,afterdoing this all your personal content will be deleted so take the back up before doing the formate:good:
Click to expand...
Click to collapse
Hi ,
I would request the very same mail be forwarded to me also at [email protected] as I am having the same exact problem. I guess my tab is 7C+ Edge but the word Edge is not written any where on the back cover. It has SA86V2G v1.3 Motherboard and a Single VGA Camera on Front Right Upper Corner. Thanks in advance ! I specifically need to run its camera functionality.
ubi slate 7cz rom and cwm
can ne 1 provide me a rom of ubislate 7cz.......coz my tab is bricked and stuck on boot...i tried da 7cz img stock rom through phoenix suit but i got n error FL2fe error.....can ne body help me wit dis....¿¡¿¿¿¿¿¿¿
Hi,
My haier w910 crashes when I set WIFI on. When crashing it's rebooting. Because the battery is fixed, the proces continues till i'm fast enough to set it on flight mode.
Phone came with a different rom than the orriginal chinese/enghlish version (multilanguage western oriëntated with google play).
Because the phone isn't that populair I cannot find other users with the same problem.
I learned from member xavwanted: This is a soc msm8260a all wireless chip are integrated with the cpu.
I have allready tried another rom that the reseller send me (the original chinese/enghlish common version), wiped the phone, tried another Rom (touchwizz needrom com /mobile/haier-w910/, wiped the phone. Unfortunally lost my first rom with multilanguage.
I read other questions with the same proeblem on XDA, but didn't help me. Some reply are to difficult for me.
The problem started when the temperature (weather) was very high, about 34 degree celcius... Maybe something went broke? :-s
1. Are there more possible sollutions? Can someone help me when it's on a step by step base?
2. Is there a w910 user with the original (or another that fits) multilanguage ROM?
Good bye,
Chris
Haier w910
I have same problem if someone can pass the official rom unlocked for me I thank everyone.
1kiel said:
I have same problem if someone can pass the official rom unlocked for me I thank everyone.
Click to expand...
Click to collapse
I have send my phone back tho the reseller (Tinydeal). For you, I don't think someone replies on this topic
Haier w910
Solved my problem, put the original rom link ://pan.baidu.com/share/link?shareid=150215&uk=2939107928 click fastboot_dl_all which is the uncompressed file, the cable connected to your computer volume off putting down blue light illuminates and minisculas letters will appear wait for the update it is android 4.0.4 English and Chinese, the Wi-Fi is working again, put yourself directly on the card will give signature error. "Then did the same process of putting this update v6.0.1.5 for clock-4.1.2 muitlinguagem.
The link to the 4.1.2 update just follow the steps in this post is easy ://pan.baidu.com/share/link?shareid=150215&uk=2939107928
include the http because the forum does not let put link
Hi all
I came to this forum, to find help for my problem.
Believe me, this problem has me really break my head.
I bought a tablet zync Z930-plus with android 4.0
I began to discover it, connecting and installing applications via Google Play store.
And suddenly, in five days of use, it failed, stilling blocked at the logon android.
The last thing I remember is that I installed an application that upgrad android to 4.2 , I can't exactly remember the name of the application, but I remember that I tried to go to android 4.2. Do not blame me, because I'm not an expert, but I'm curious, and I think that all the things go well.
Now the tablet is still stucking on android logo when I turn it on.
I tried to repair it and reinstall with several method, I did the factory reset ... still nothing, one of this method is that I navigate to the official website of zync, and I downloaded the pack of updating and reinstalling the OS with the PDF tutorial, but the tablet does not connect with the computer (Windows XP), it is still stuck at android logo.
I download and install firmware with the sd card, I got a little,:laugh: but the toutche screen not work, and I came across a Chinese android:crying: !!!!!!....
I do not know what to do now.
Can you give me a hand please
some friendes in forums advised me to go and ask in xda-developers.com, they tell me that i need a firmware that work fine with the CPU of the tablet...for this, i am here, and i bring with me a picture of the "motherboard" of the tablet, in joint
Thank you
Note: If you want more information, I will pass it
Tell me more about your tablet? i can help u
mtktauseef said:
Tell me more about your tablet? i can help u
Click to expand...
Click to collapse
hi freind
thanks for your replay
this problem was sloved with a god link that i found
here is the firmware name's inet-86vs-rev01
thanks twince
Keep in touch
mahboub said:
hi freind
thanks for your replay
this problem was sloved with a god link that i found
here is the firmware name's inet-86vs-rev01
thanks twince
Click to expand...
Click to collapse
:good::good::good::good: ohk If you need any Help then .... Contact Me :- :good::good::good:
Hi i have a m-horse n9000w mobile ( similar as note3 ) and after a bad flash with SP FLASH TOOL my phone won't boot up at all he just show a black screen ( like he his off ) i have tried many solution to recover it and so .. i don't know how to do .. if anyone have an idea please help me :/
( Sorry for my bad english i'm french ^^ )
Thank you for your help !
Up
Anyone ? I have tried to put preloader but i get 4032 error in sp flash tool
Help Help Help! M-HORSE N9000W stuck in boot logo!
Mine was working fine until they hung up and when I went to turn on, always gets stuck on the screen where the boot logo appears.
I've tried Wipe Data and Cache and remains the same. :crying:
I have looked around the room side and not against. :/
Someone who can help?
The phone is this: M-HORSE N9000W Android 4.2 MTK6572 Dual Core 1.3GHz 512MB RAM + 4GB ROM bought in everbuying...
Sorry for the english I'm Portuguese.
Stock ROM but (BROM ERROR: S_FT_ENABLE_DRAM_FAIL)
The supplier sent me the ROM STOCK
But the SP Flash Tool Flash gives error 4032 (BROM ERROR: S_FT_ENABLE_DRAM_FAIL).
Someone can help me solve?
Cumpz
The same problen
The first day the mobile work during two hours after don´t turn on. If I connect it to PC is on but the touch screen is dark. Help us? . I think that this problem is for the ROM
...
forlillo said:
The first day the mobile work during two hours after don´t turn on. If I connect it to PC is on but the touch screen is dark. Help us? . I think that this problem is for the ROM
Click to expand...
Click to collapse
you did root the phone? You deleted something from the cellphone?
My remained so after doing root and then delete those programs comes from the factory with TITANIUM BACKUP.
Blackscreen
Same here...
Was first time booting the phone the Blue android started flackering and than software Crash (blackscreen).
Now i got allways just the blackscreen.
Help please
Video: facebook.com/photo.php?v=820772054601727
SOLVED
Finally after many attempts, I managed to get it working: D
Whoever wants I can help.
Add: facebook.com/FgSe7en on Facebook or fabio_godinho on skype.
no on m hors n9000w
Nino1200 said:
Finally after many attempts, I managed to get it working: D
Whoever wants I can help.
Add: facebook.com/FgSe7en on Facebook or fabio_godinho on skype.
Click to expand...
Click to collapse
.hi frend help mi my phone not on and no charg .any salusation
Add me...
asad75 said:
.hi frend help mi my phone not on and no charg .any salusation
Click to expand...
Click to collapse
Add: facebook.com/FgSe7en on Facebook or fabio_godinho on skype.
Great guy
Nino1200 said:
Add: facebook.com/FgSe7en on Facebook or fabio_godinho on skype.
Click to expand...
Click to collapse
He helped me to fix it, and my software broken Samsung Galaxy S2 that was off since a year (Y)
Really a great guy!
Help connect to PC.... M-Horse N9000w
MrPatrickMr said:
He helped me to fix it, and my software broken Samsung Galaxy S2 that was off since a year (Y)
Really a great guy!
Click to expand...
Click to collapse
Hi, MRPatrickMr.
I have a problem to connect to PC my M-Horse N9000w (black screen...not powering...not charge)
I have installed MTK driver....PDANet....but ...How to make the computer do I detect my phone???
Thanks for your help in advanded.
Csa.
Phone M-HORSE N9000W dont turn on
Dear all
Please, i have big problem with my new phone M-HORSE N9000W. The first day the mobile work during two hours after don´t turn on. If I connect it to PC is on but the touch screen is dark. Please Help us?:crying::crying:
How do you root the m horse n9000w
Hello dear XDA Forum.
I've got a bit of a problem with the Samsung Mega 6.3 of my father. Up until now I have flashed it every month or so with a new rom, but now for the first time I have encountered a problem I can't solve on my own.
After flashing a new Cynogen Mod Rom the Smartphone stopped recognizing the Sim-Card, it won't even let me make a Emergency call.
I've tried several othe Roms now (Broken, other Cynogen Mods, Aokp) but with every rom I get the same error massage "com.android.phone has stopped working".
The only step I got into the right direction was, after reading alot of post about the same problem on other devices I saw that mine didn't have its IMEI anymore, I flashed the original IMEI with an exposed module but the error still remains.
I'm at a standstill and have now idea what I could try now.
Does anyone of you have a clue what the problem could be?
Thanks in advance!
[Btw. sorry if my writting isn't understandable or if there are any grammar mistakes, but english isn't my first language]
my samsung mega GT19205,cannot read my simcard,it says no simcard,pls help me fix it,thanks..