Unlocking Bootloader voids your warranty however you can relock the bootloader!!! Please think about what you do before reading on
Great kudos to the_laser, his original thread is here : http://forum.xda-developers.com/showpost.php?p=17384177&postcount=3
Requirements:
at least Froyo or Gingerbread Android
unlocked BootLoader
same Baseband as for any custom rom
Instructions:
How to Lock and Unlock the Bootloader : Thread by Spyder-X with Instructions
Please make sure to delete the following modules if present in /system/lib/modules/ this is really important otherwise phone might reboot due to unloading adresses have changed : delete x8oc.ko, x8uv.ko, cyctma300_ser.ko, x8mddi.ko, ext3/4.ko jbd(2).ko or mt.ko
except OC everything is already in Kernel, please do not try to insmod current x8oc/uv module needs to be recompiled with new addresses
unpack the Kernel zip and place ftf file in firmware folder of flashtool
select flash and choose ZombiePanic
flash like usual
Features
no touchbug with GB roms
Tun/Tap
Overclocking (and undervolted)
built in Multitouch
mddi patched!
netfilter
iptables/xtables
ASHMEM/PMEM/SHMEM
EXT3/4 JBD(2)
USB RNDIS/RMNET (one step closer to native USB Tethering)
partial USB Host Side (not yet fully working)
alot more filesystems supported (CIFS,CD_ROM ISO,etc.)
few performance tweaks on performance govenor, smartass would be nicer maybe next time after i get permission
Bugs
none known so far
Download
Again you do this at your own risk!
Download ZombiePanic Kernel v1.63
At the Moment I advise to not use Overclocking as I still need to patch some PLL values which means OC maybe slower than set to 600 MHz
Download Zombie Panic Extreme Edition
Warning: Do not use if you are a regular user, its for hardcore overclockers. Zombie Panic Extreme Overclocking Edition be careful with Overclocking!
Features:
- upto 864 MHz with patched PLL
- features (and maybe bugs) from ZPKernel v1.61 integrated .
might be unstable with higher frequencies!! be careful do not set cpu speed on boot while checking frequencies
I am not responsible for bricked devices. Do at your own risk.
Download Zombie Panic Extreme Overclocking Edition
Code:
v1.63
-worked on overall snappiness, system should react faster overall
v1.62
-for me stable again. sorry about reboots it was caused by "fixed" touchdriver, i have rewritten some part and now its fine again! (also running super user v3 without issues so far)
v1.61
-found the issue on stability/performance loss (in acpuclock.c)
v1.59
-improved stability (a nat settings was causing a few issues)
-performance in booting might be a bit better
v1.58
-fixed swiping issue in touchdriver from the right or the bottom while finger was "outside" the screen
v1.57
was a debugging version not released to public in order to rewrite most part of dual touch driver
v1.56
-sorry it was late, i forgot to revert two lines in camera now everything working again like it should fixed v1.54/v1.55 camera issue.
v1.55
-fixed video cam driver from v1.54
v1.54
-some clean up
-improved touchscreen driver a bit
-integrated Tun/Tap
-disabled all unncessary debugging
-again a slight increase in performance and boottime
-real cpu overclock not yet finished
v1.52
-integrated smartass conservative/ondemand governors and can be selected
in cm or setcpu settings [B]full credits goto AnDyX[/B] his
original Thread is [URL="http://forum.xda-developers.com/showthread.php?t=1159899"]here[/URL]
-worked again a little on kernel ramdisk
-new boot logo [B]credits go to Mr.Krypton!! thank you very much[/B]
-enabled GPU KGSL per Process caching might improve 2d/3d performance
v1.51
-all changes from v1.4 now implemented
-partial clean up on kernel ramdisk, next step no chroot anymore
-wireless working
v1.5
-reverted link back to 1.3 wireless works here, wireless issue i'll take a look again
v1.4
-patched lightsensor now should never return illegal value -1 so no automatic brightness bug
-some what patched multitouch to be a less pain in the ass while zooming
v1.3
-full overclocking support kernel wise should also reduce jiffy lags
-new custom logo for this version ;) if anybody wants to make a better one please let me know
-included mddi fully (ESD_Recovery lag should be gone)
-included small patch for light sensor (not yet finished) to not report illegal light value -1
v1.2
-full iptables support also with DroidWall
-partial NAT support
-almost done with Overclocking in Kernel
v1.0
-inital release
credits to the_laser,zdizhu, jerpelea, Bin4ry, Blagus ,azuzu, AnDyX,Mr.Krypton and everybody else involved in unlocking the bootloader
https://github.com/slade87
This Kernel is not using FXP or other sources, i started from scratch with SE kernel 492.
no need with Kernel v1.2
Just in case anyone wants to use DroidWall which uses one xtable module as well which is netfilter owner, extrace the zip file and put on /system/lib/modules/xt_owner.ko
edit hw_config.sh in /system/etc/ at end and include this line:
insmod /system/lib/modules/xt_owner.ko
and droidwall is working like it should.
next kernel will have this also included.
Great work mate!. Im working on preroot kernel you should also include it.
Btw, can you share sources for use some things, thanks.
edit: if you want a initlogo, send me ramdisk + png, and ill send you back modded initlogo
Great work mate!!! don't want to get off topic, and sorry if i do but is there a chance to get a version for x10 mini too???
My regards,
Ribben
Nice this custom kernel have alot of featurescant wait for the governersgreat work slade87
EDIT(OFFTOPIC): slade87 and D4 you should now start so help eachother on custom kernel.this is new on our device and you two are genius so keep up the good work
Sent from my U20i using xda premium
Work together please and make a fabulous kernel for our devices.
Why not Team487 lol?
Sent from my LG-P990 using XDA App
Go to this thread for instructions on gow to unlock the bootloader on your phone and verify that your bootloader unlock was successful.
Link: http://forum.xda-developers.com/showthread.php?t=1254225
Cheers ,
SpyderX
Please x8 version.
Sent from my X8 using Tapatalk
Slade, I noticed that the included iptables has no NAT support?
D4rKn3sSyS said:
Great work mate!. Im working on preroot kernel
Click to expand...
Click to collapse
Azuzu is working on that.
Sent from my U20i using xda premium
My touchsreen isnt working anymore after flashing this kernel
im on stock se 2.1.1.c.0.0
can someone help me?
darrie1 said:
My touchsreen isnt working anymore after flashing this kernel
im on stock se 2.1.1.c.0.0
can someone help me?
Click to expand...
Click to collapse
Mate, you should be able to help yourself in such case, before doing that boot loader/kernel thingy :/ you also could have provided more info...
well, first steps I think::
1) if your touchscreen is only working WEIRD I guess you just have the power cable plugged in... unplug it, wait few seconds and then your touchscreen should response as usual. otherwise ref lash default se kernel...
2) if touchscreen does not work anymore... well flash default kernel and wait or build own custom kernel
darrie1 said:
My touchsreen isnt working anymore after flashing this kernel
im on stock se 2.1.1.c.0.0
can someone help me?
Click to expand...
Click to collapse
Delete cyctma300_ser.ko from /system/lib/modules multitouch is in kernel module only causing issues
Sent from my U20i using xda premium
Snoopo said:
Mate, you should be able to help yourself in such case, before doing that boot loader/kernel thingy :/ you also could have provided more info...
well, first steps I think::
1) if your touchscreen is only working WEIRD I guess you just have the power cable plugged in... unplug it, wait few seconds and then your touchscreen should response as usual. otherwise ref lash default se kernel...
2) if touchscreen does not work anymore... well flash default kernel and wait or build own custom kernel
Click to expand...
Click to collapse
i dont know what you are trying to say in your first sentence but the screen didnt respond not weird so ive flashed d4kernel
but anyway thanks for reply
slade87 said:
Delete cyctma300_ser.ko from /system/lib/modules multitouch is in kernel module only causing issues
Sent from my U20i using xda premium
Click to expand...
Click to collapse
before flashing your kernel i updated with SEUS so i didnt have mt module,
i hope next version will work
slade87 OC Does not work
Eyama said:
Nice this custom kernel have alot of featurescant wait for the governersgreat work slade87
EDIT(OFFTOPIC): slade87 and D4 you should now start so help eachother on custom kernel.this is new on our device and you two are genius so keep up the good work
Sent from my U20i using xda premium
Click to expand...
Click to collapse
Stop compairing Slade to d4rk!
terrormattie said:
Stop compairing Slade to d4rk!
Click to expand...
Click to collapse
I don't think that was eyama point---
@slade hi bro thanks given
Peace
Sent from my Xoom MZ604 using xda premium
terrormattie said:
Stop compairing Slade to d4rk!
Click to expand...
Click to collapse
As kormatoes said, he didn't mean that. I wonder how you came to this conclusion...
He just said his opinion which was Slade and D4 to cooperate.
update to kernel 1.2
slade87 Thank you. you need to refine multi-touch.
Related
Yes, the Bootloader have been successfully bypassed!!!!!!.
I know that, like me, a lot of people is goin to try this, so I believe it is a good idea to have a thread to give feedback, report bugs and post dev-related information without getting the the original thread SPAMMED,
Since future releases would be done through recognised devs, this thread would be ONLY FOR THE ALFA RELEASE MADE BY Z ON MARCH 31.
This is the original message from Z:
========================================================================================================================
Ok, here we go. It wasn't the April Fool thingy
The bootloader has been bypassed using the kexec/miniloader method
We are able to boot custom kernels now!
I'll keep it short as I'm quite busy today... I haven't had much luck with disabling MPU nor resetting a MCPU - it failed no matter what I did. Same thing with porting shutdown procedures into miniloader. But when I found out that the custom kernel doesn't reboot on baseband 52, I switched to the .504 sources and restarted the work. Using the debugfs tips by Goroh, I realised some stuff I'd rather to keep in between the developers here... And then *poof* - the green USB led appeared and I knew I was getting there!
Anyway... this is the first release of the fully working custom kernel (flashable via xRecovery). I haven't had much time to work on it so it's kind of proof-of-concept. Tested for 48h without any problem (not even a reboot).
FreeKernel-alpha1:
http://www.mediafire.com/?d8v914keiqsmc3n
This is the alpha version of custom 2.6.29 kernel based on the SE sources. I do not plan to work on this release anymore - it is just for testing purpose. From today on I'll start to port SE stuff to the latest (GBread) kernel.
Changes:
- removed 32 fps cap
- implemented netfilter (Droid wall, native USB/wifi tethering etc.)
- undervolted to 0.950mV to save battery
- don't remember what else I did, I bet something nasty
- super ugly boot logo!
Requirements:
- baseband .52 + the relevant kernel
- clean 2.1 ROM, compatibile with .52 baseband (e.g. .504)
- working xRecovery
Please note I am not responsible for any damage this software may cause to your device! Use it at your own risk!
There is absolutely no support for this alpha release!
Big thanks to (no particular order): Goroh_kun, Jerpelea, Bin4ry, Maxrfon, Biktor_gj and everybody else who contributed into X10 custom kernel development.
At first the relevant kernel patches/sources will be delivered to the recognised X10 developers. Later on everything will be released as it's obviously Open Sourced.
Please refrain from posting comments in this thread - it's for developers only. Spamming will only make our task harder to accomplish!
Cheers,
z
========================================================================================================================
Please note that I'm not a dev, and neither me or Z would be responsible for what you do with your phone!!!
Report only feedback useful for the devs
=================================================================================================================
Edit April 5:
Z posted a in-call volume fix for its alpha kernel. Please take the time to make a usefull post with feedback about it. It will be better if you include a logcat like or a detailed report.
This is the original post:
zdzihu said:
Here's the kernel image with possible in-call volume fix. Howto:
- install the alpha kernel package
- copy this boot.img into /system/kernel
Please let me know whether the call volume is fixed for you (in the "comments/feedback" threads.)
http://www.mediafire.com/?uxc0ht1tyvl0qdx
This is for testers/developers only!
Code:
--- q6audio.c~ 2011-04-05 08:29:25.653333350 +0200
+++ q6audio.c 2011-04-05 08:29:25.696666684 +0200
@@ -54,7 +54,9 @@
static struct q6_hw_info q6_audio_hw[Q6_HW_COUNT] = {
[Q6_HW_HANDSET] = {
.min_gain = -900,
- .max_gain = 600,
+ //.max_gain = 600,
+ // zdzihu: let's get loud!
+ .max_gain = 1199,
},
[Q6_HW_HEADSET] = {
.min_gain = -1900,
Cheers,
z
Click to expand...
Click to collapse
Eternity 2 003a confirmed to work with baseband .52
only one reboot while I played Angry Birds Rio, other than that I made two calls with success, wifi is ok and the uptime is around 2 and a half hour
of course, DT works
if we want to test it, how to revert to original kernel?
minjiet said:
if we want to test it, how to revert to original kernel?
Click to expand...
Click to collapse
restore a backup from xrecovery
WOW
You don´t need to downgrade to the original Kernel
After installing the custom Kernel my Xperia flys!!!!! Everything is soooo much smooth and you can see with Quadrant that fps rising over 30
Now we have to wait for the newest Kernel!
@Z: Make the next Kernel overclockable pls!!!
Whitecookie said:
You don´t need to downgrade to the original Kernel
After installing the custom Kernel my Xperia flys!!!!! Everything is soooo much smooth and you can see with Quadrant that fps rising over 30
Now we have to wait for the newest Kernel!
@Z: Make the next Kernel overclockable pls!!!
Click to expand...
Click to collapse
quadrant fps raising over 30, mean increase in 3D score?
Just out of interest, what is visual performance like without the frame cap?
Sent from my X10i using XDA App
Yes
Normally it has to improve the 3D performance.... but if i play Angry Birds it feels laggy. If i use Launcher Pro or srolling down pages it feels like..... Don´t know how to say
Man I don't understand. I downloaded the kernel but my frames are worse now
Sent from my X10a using XDA Premium App
Lion3494 said:
Man I don't understand. I downloaded the kernel but my frames are worse now
Sent from my X10a using XDA Premium App
Click to expand...
Click to collapse
Flash JIT V2 on your FW... it has to improve the performance
i agree. everything about my phone since installing this kernel makes my x10 feel and run like crap. fps suck. 2.1 rom again? what the F? this is very dissapointing.. kudos to the devs for bypassing but get real. what changes really are there? when i have overclock and fps real does go past the 33 tops that i reach on quadrant then ill try again. especially if i dont have to use a crap 2.1 se rom.
Edit: ok i have it working. this is what is up with it. fps only changes from 30 fps cap on the quadrant test when you have the rotating planets. i pegged at damn near 50fps. unfortunately this is the only one where fps were high. as i normally run z's b4 with data2sd. i peg on the same one at 33fps. being that we are only able to run this on a 2.1 se rom as of the moment. quadrant scores are going to suck. i normally run 2700 on b4 with data2sd.
As for overclocking.... not at the moment. yes it is a custom kernel but overclocking is not part of this kernel. with one is compiled to allow overclocking and the use of other basebands and builds such as .54 .55 .58, we will still be stuck with a max of 998 on our cpu. but once it is available with other builds and overclocking is allowed. we should easily be able to push close to 3000 on quadrant.
I had it installed before. Do I install it again?
Sent from my X10a using XDA Premium App
Lion3494 said:
Man I don't understand. I downloaded the kernel but my frames are worse now
Sent from my X10a using XDA Premium App
Click to expand...
Click to collapse
r u using the compatibles baseband???
Yeah im going back to my other rom on 2.2
Sent from my X10a using XDA Premium App
Yes I am on bb 52
Sent from my X10a using XDA Premium App
I fear one of u will brick your phone .
And z said he will b working on new one. So I feel its pointless to even test this? And he knows we are not developers so I doubt he will even bother reading this
Sent from my X10i using XDA Premium App
anyone make a video for it and show how to works compared to 30fps cap?
common guys ,haven't u read it ,it works only with 2.1 and baseband .52 so u cant try it on foryo custom roms it won't work perfectly
SErooted said:
i agree. everything about my phone since installing this kernel makes my x10 feel and run like crap. fps suck. 2.1 rom again? what the F? this is very dissapointing.. kudos to the devs for bypassing but get real. what changes really are there? when i have overclock and fps real does go past the 33 tops that i reach on quadrant then ill try again. especially if i dont have to use a crap 2.1 se rom.
Click to expand...
Click to collapse
Wow.
You sound soooo ungrateful!
This was only a test kernal by Zdzihu, obviously, he's starting small, only people who know what they're doing should flash this.
It may seem like a "downgrade" for all you casual users, but for the devs this is a giant leap forwards.
Here is the quick guide for all u guys having trouble..
I did it this way and i am getting upto 55 fps on quadrant.
1. flash your phone using the latest flash tool with X10i generic .504
here is the link http://forum.xda-developers.com/showthread.php?t=920746
2. Switch on the phone and finish with the setup and turn it off.
3. Now again flash your phone with the 2.0.52 baseband which replaces the current
Kernel only. Here is the link http://forum.xda-developers.com/showthread.php?t=960527
4. Switch on your phone, finish with the setup and root it with flash tool
5. Download Z's Xrecovery and install it with market's busybox, here is the link for Xrecovery http://forum.xda-developers.com/showthread.php?t=859571
6. Reboot your phone and in Xrec flash the kernel provided by Z (Freekernel)
7. Switch on the phone and enjoy fast and responsive Freex10...
Intro
Ok, this will be another fun.
Again, my first attempt (like FroyoBread and GingerDX!) to build a custom Linux kernel for a phone. I've just found some free time this weekend This time, this is a kernel. Again, you can guess it's a Linux kernel having my customized features. We will gradually see what can be done
The main goal is to have a fast, smooth, lightweight kernel with special features.
This Linux kernel is based on our great FreeXperia Project (Jerpelea) kernel. Thank you for your unbelievable contribution for our Xperias. I still use racht's great compiling machine for this project. Thank you racht.
Features
Linux 2.6.29
Default GingerDX logo
X8Gesture / AX8MT for (fake) dual touch
ext 2/3/4 support
FXP's merged minmax / smartass / smartass V2 governor
netfilter / iptables
swap. NOT recommended.
MDDI fix
Brain **** Scheduler
Known bugs
None (?)
Requirements
Unlocked bootloader
Flashtool 2.9.1
Desire to void your warranty!
Downloads
v004
v003
v002
v001
Install instruction
1. Download
2. Turn off the phone
3. Run flashtool
4. Press Flash, choose downloaded file
5. Turn on phone while pressing back button
6. Wait till progress finishes
7. Unplug the phone, turn it on back
8. Enjoy.
Notice
1. This kernel is tested by me only on GingerDX. I don't test with other ROMs, so it is only supported if you are using GingerDX. (Perhaps this will change in future, but not now)
2. This kernel is written for E15i. I don't have E15a, so if you have problems with E15a, I cannot help.
3. This kernel is in development. It may contain bugs. If you have bugs (reboot, something not working, etc...), post it here. Don't send me PM for technical problems. I will not answer most of technical PMs
4. Incompatible with FXP ROM. Wifi will not work on his ROM.
5. Source: it has been on github for a long time but how come I forgot to put the link here @[email protected]
Thanks
Thanks go to the_laser, jerpelea, racht, nobodyAtall, zdzihu, Bin4ry and lots of other contributors...
Release history
October 04 v004.
SD Card compatibility fix.
Notice: after this release I'll be very busy. I will not work on both GDX and LDX for some time.
September 27 v003. Fully working.
Wifi fix! Thanks to FXP.
Remove chargemon compatibility to solve 100% load of init process.
September 24 v002. Improvements.
Integrated ClockworkMod 4.0.1.5. Use touchscreen to activate it during boot.
Built in UV/OC. Set 614MHz as default and removed 600MHz. I'm not a fan of OC.
BFS 0.313
Chargemon compatible!
September 19 v001. Initial public release.
Development (What has been done in my development kernel)
Nothing yet
Disclaimer
I'm not responsible if this kernel bricks your lovely phone. Use it at your own risk!
Donation
You like my kernel? Feel free to
. I'd like some beer in this hot summer!
Wow dx, you are truly rocking X8!
Amazing job, im going to wait a little bit til this gets better!!!
Goodbye!
I agree with the comment before mine
Keep up the good work...
Can this be flashed on top of gdx ROM or we need to do it from stock ROM?
Sent from my X8 using xda premium
thanks so much dx, you are really awesome
this kernel can be used with other rom, like mini cm? thanks u
wow.. thanks and keep it up bro..
ps. noob here about this kernel thing, do I need to unlock first the bootloader or just flash it? Sorry co'z i don't see it in the installation procedure..thanks
Thanks, doixanh, you're the man! Although i'll keep my paws away from my bootloader for a little longer until all this custom kernel thing settles down
Keep up the awesome work!
Well dx, what word should we use to describe you? I'm just happy to see you joining this another fun time. Thks for such good job.
Sent from my X8
@DX you need to change wifi module to make wifi work
come to think of it.
what are kernel?
where is the screenshot? (for example?)
Rycon33 said:
Can this be flashed on top of gdx ROM or we need to do it from stock ROM?
Sent from my X8 using xda premium
Click to expand...
Click to collapse
my question also
Nice work, dx
Nice work DX !!!
unfortunately i use WiFi a lot so i will w8 for next update
I'm really sorry to see these guys that want kernel but they dont know what it is:
fakhry7 said:
come to think of it.
what are kernel?
where is the screenshot? (for example?)
Click to expand...
Click to collapse
Don't get disappointed for them
Yes I remember Angga has the same question regarding wifi, it will be fix soon
GJ, DX
anyways... shouldn't u have a warning of some sort to remove the modules already included in your kernel? it will mess up the memory addressing and cause bootloops, no?
also, requirements should have "Unlocked bootloader" too for those ignorant twits
Wow, nice worck!!!
chewdaniel said:
GJ, DX
anyways... shouldn't u have a warning of some sort to remove the modules already included in your kernel? it will mess up the memory addressing and cause bootloops, no?
also, requirements should have "Unlocked bootloader" too for those ignorant twits
Click to expand...
Click to collapse
Wow! You're so great. Maybe you can be one of the president of SE. Nice bro.
Can't boot with stock rom. Appear the GDX boot image but then go to black screen.
Thanks but I guess it will be hard for just one man to develop a kernel and a rom at the same time....so i appreciate all of this contribution to this community
Sent from my X8 using xda premium
Good work
Sent from my Xperia X8 using Tapatalk
This is a repackaging of DooMLoRD's kernel for the Ray - this is only for the stock Rom at this time, and will not work on MIUI or CM.
It's based on DooMLoRD's Github sources, original thread with more information about the Kernel is here: http://forum.xda-developers.com/showthread.php?t=1172885 - all thanks should go to him, I've edited very little, simply changed some of the config to suit the Ray and tested it.
Brief summary:
* Overclockable to 2GHz (set at 1GHz to start - made sure of it this time!)
* Enabled most of the schedulers so you can choose your favourite (brazillianwax, smoothass, SavagedZen, interactiveX, lagfree, minmax, Scary, smartass, interactive, conservative, ondemand, userspace, powersave, smartassV2, performance).
[UPDATE]
Had a look at the issues with the 'Flash' on the camera not working - this is now fixed.
Also, after being requested by a couple of people I've recompiled it for MIUI - you'll have to flash the second version for it to boot. (Please choose the correct one, flashing the wrong one will let you access CWM-recovery, but the system won't boot.) MIUI isn't working at this time.
Updated Kernel can be found here for Stock Roms:
http://dl.dropbox.com/u/17615284/DoomKernel-2011-12-28-1201.img
[Edit] Kernel for MIUI booted, but became unresponsive after it's been on a while. Taken the link down until I can find a day or two where I'm not using my phone so I can flash MIUI myself and look into it.
Thank you very much for this good present !
I just would ask if it is compatible with bheremans' MIUI rom, and if it's not if someone can port it, or explain to me how it can be done.
hartej said:
Brief summary:
* Overclockable to 2GHz (set at 1GHz to start - made sure of it this time!)
* Enabled most of the schedulers so you can choose your favourite (brazillianwax, smoothass, SavagedZen, interactiveX, lagfree, minmax, Scary, smartass, interactive, conservative, ondemand, userspace, powersave, smartassV2, performance). Think I may have missed a few - shall go back and check when I get a chance.
* Can't remember if I managed to get it working with the latest Ramdisk or not. At one point I was using it with a previous Ramdisk but not sure if I eventually got it working... (Currently the CMW Recovery is version 5.0.2.7?) I'll have to check on this, if it's using an old RamDisk then some of the features may not be available.
Initial release - I've been using it for a day now and it seems quite stable.
http://dl.dropbox.com/u/17615284/RayDoomKernel-2011-12-18.img
Click to expand...
Click to collapse
Can you integrate in the kernel the dual mode call recording ability, please?
aragog53 said:
Thank you very much for this good present !
I just would ask if it is compatible with bheremans' MIUI rom, and if it's not if someone can port it, or explain to me how it can be done.
Click to expand...
Click to collapse
No idea, I think that MIUI, CM7 and Stock Roms require different Kernels (or some serious customisation) so i'd be guessing: No. But it's just a guess.
Tistitus said:
Can you integrate in the kernel the dual mode call recording ability, please?
Click to expand...
Click to collapse
DooMLoRD added this to his Kernel, but I don't have any requirement to record my calls so can't confirm if it's working or not. Feel free to test it out - you may find yourself in luck!
Bah! Uploading failed the first time, but it's fixed now.
If you downloaded the file before I posted this, and only have a 1.2MB file then please DONT FLASH IT. It shouldn't mess anything up permanantly but your device won't boot.
I've uploaded the file again (to the same location), please re-download and flash this one (it should be just over 6MB)
Please make it compatible for miui?;D.......
Sent from my ST18i using Tapatalk
Hi hartej glad to see you back on the forum
A have quick question, how can be repaired this problem: http://code.google.com/p/android/issues/detail?id=3708 DooMLord may be able to help you repair it? Or will show some tips
Sorry for double post...i had found a way to port to MIUI...take a look here hartej..)
bheremans said:
Rom by iriijo
To port kernel : nothing special, just compile it with :
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
and
CONFIG_PAGE_OFFSET=0xC0000000
Click to expand...
Click to collapse
Sent from my ST18i using Tapatalk
Hi Hartej, sorry but even with your second upload. The kernel doesn't boot. It stays at black screen (not even the SE logo)
@hartej: some notes ...
thinking its a good choise using DooMLoRD's kernel as your base, congratulations for your wise decision
some minutes befor i fastboot'ed (temporarly) your image (i.e. fastboot boot <image>)
# kernel cpufreq defaults is ondemand 245760/1862400Hz - no max 1GHz as you'r thinking?
some LITTLE change-requests from me - please
# /proc/config.gz support - a great help for every self-builder
# init.d support - importent i'm thinking, i modifyed init.semc.rc in initrd.img in your boot image for myself (serves only as a example)
service sysinit /system/bin/logwrapper /system/xbin/busybox run-parts /system/etc/init.d
user root
oneshot
# a git respository of your kernel for self builder
ok, thats all for NOW, thank you for your good work.
greetings
Doesn't boot
I've downloaded your present(RayDoomKernel-2011-12-18.img / 6.23MB) and flash it on my Ray with fastboot tool. But it doesn't boot, just shows me black screen.(Not even show me SE logo ) Anyway I appreciate your great effort.
is it for stock 4.0.2.0.A.42 firmware
Oh I tried.Doesn't boot with the 4.0.2.A.042 FW.
@hartej
glad to see u back on this
some devices cant handle 1.6Ghz+
thats why i keep 2 kernels
2.0Ghz
and
1.6Ghz
for other things u can check my kernel-ramdisk
SWDJPA said:
I've downloaded your present(RayDoomKernel-2011-12-18.img / 6.23MB) and flash it on my Ray with fastboot tool. But it doesn't boot, just shows me black screen.(Not even show me SE logo ) Anyway I appreciate your great effort.
Click to expand...
Click to collapse
masray said:
Oh I tried.Doesn't boot with the 4.0.2.A.042 FW.
Click to expand...
Click to collapse
Lol, I'll upload the right one eventually! Just tried downloading and flashing this myself, only to discover that I'd mistakenly uploaded the latest version instead of the working one. Still playing with getting the ARC ramdisk working with the Ray, possibly because of the speed issue DooMLoRD quotes above which is the reason for the black screen - the Kernel itself is identical, it's just a difference in the RamDisks.
I've uploaded the working one now - sorry for any confusion!
http://dl.dropbox.com/u/17615284/DoomKernel-2011-12-18-1547.img
hartej said:
Lol, ... I've uploaded the working one now - sorry for any confusion!
http://dl.dropbox.com/u/17615284/DoomKernel-2011-12-18-1547.img
Click to expand...
Click to collapse
i'll testet it shortly, now it boot in ondemand 245760/1024000Hz und init.d support works too - super
one questions leaves ...
i want to compile myself. where to get your changes for the ray (.config mainly ???), when i use DooMLoRD's cloned git sources ???
thanks and have i nice day ...
hartej said:
Lol, I'll upload the right one eventually! Just tried downloading and flashing this myself, only to discover that I'd mistakenly uploaded the latest version instead of the working one. Still playing with getting the ARC ramdisk working with the Ray, possibly because of the speed issue DooMLoRD quotes above which is the reason for the black screen - the Kernel itself is identical, it's just a difference in the RamDisks.
I've uploaded the working one now - sorry for any confusion!
http://dl.dropbox.com/u/17615284/DoomKernel-2011-12-18-1547.img
Click to expand...
Click to collapse
Please for MIUI ??
Works Great
Two thumbs up!
It is quite stable even at 2ghz.
But I would stay at 1.5 with smartass v2 considering battery life.
Thank you
-Ray User from Korea.
doesn't work with FXP050 on my Ray ... It does boot into the system but it doesn't show any submenus or option menus ... they are there, i can select by where i remember them to be but it is not graphicly shown
This Kernel is for STOCK Rom !!!! not for cyanogen mod.
This is Rage Kernel v2.9 for Xperia Mini / Mini Pro / Active / Live recompiled to run on FXP CM7.2.0 ROM from Freexperia Project here.
The boot image consists of kernel compiled from DuMOHsmol's Rage Kernel v2.9 source, FXP wi-fi driver and FXP ramdisk. It is tested running in FXP122 CM7.
The kernel is compiled using FXP default config, modified to enabled added features in Rage Kernel, so overall the features is similar to Rage Kernel v2.9 (see post #2 below)
Credits:
Many thanks to DuMOHsmol for Rage kernel source and DoomLord for providing the base/stock source.
Thanks for Freexperia Team for making such a great rom.
Thanks for wucinac, HUdasp, gandhar, Snoopo, & jakobxxl for initial testing and feedbacks.
This kernel will not be updated everyweek like FXP rom releases. It would only be updated if there's update in Rage Kernel or there's update in FXP ramdisk/ROM that requires changes in this kernel too.
I mainly compiled this kernel because it gives good battery life, so I haven't tested all features that Rage Kernel offer. Therefore I can't really confirm that those added features will work fine in CM7. What does work is the basic functionalities (like calls, wifi, bluetooth, camera, etc) and added cpu governors, overclocking options, and added i/o schedulers. What I haven't test: zram and swap.
And because I personally considered this kernel as some kind of a workaround for the battery drain issue in fxp kernel (see post #3 below), then if FXP team has fixed it, this kernel might be no longer needed.
As of version 2.6, changes from original Rage Kernel source are below:
4 files in Rage source replaced with files from FXP source :
- arch/arm/mach-msm/board-semc_mogami.c
- arch/arm/mach-msm/sdio_ctl.c
- drivers/mfd/marimba-codec.c
- drivers/misc/lm356x.c
Files sdio_ctl.c and marimba-codec.c is replaced to avoid compiling errors when using fxp defconfig. The file board-semc_mogami.c is replaced to fix touchscreen problem when using original file. File lm36x.c is replaced to fix force close problem in Torch app.
Another change is patch from here applied to fix the touchscreen issue.
Changes in version 2.7 are included as a patch files in the download post below.
Changes in version 2.8 & 2.9 are related only to cpufreq driver & cpu governors, so the patch from 2.7 can still be used, but the cpufreq part of the diff must be removed.
Version 2.7 / 2.8 / 2.9:
Please see all download links for Mini/Mini Pro/Active/LiveWithWalkman in this #75 post.
Flashing disclaimer applies! Use this kernel at your own risk.
How to use:
1. For the first time CM7 users: Flash the Freexperia CM7 kernel & Rom first, and make sure everything works fine, and then continue to step 2. For those that already have CM7 running, just begin at step 2.
2. Flash this kernel using fastboot.
3. Reboot to CWM and wipe cache
4. Reboot again.
Notes :
- This kernel is not supported in anyway by FXP team or original Rage maintainer DuMOHsmol. Anyone having problem, please don't ask them for support. Just ask in this thread & I'll try to figure it out.
- Battery life is not solely affected by the kernel. It can also be affected by apps/mods/tweaks used or applied in the rom. If battery drain is high, then please check what cause the wakelocks using apps like BetterBatteryStats here
- There are instances that using Google Maps or Latitude (or maybe other gps-related apps) would cause GpsLocationProvider keeping the phone awake, like the case in this post #82 and post #34. This situation can be diagnosed using that BetterBatteryStats app mentioned above. The workaround is to disable gps and reboot the phone.
- Of course, other than advantages, there are also disadvantages using this kernel in FXP cm7. Advantages including: a bit better battery life, more cpu governors, more i/o schedulers, etc. Disadvantages: I perceive sdcard i/o is somewhat slower, sometimes there's lag in video recorder, there might be broken features in future FXP releases, not supported by FXP team, and there might be other problems that haven't been encountered yet. If anyone experiencing more disadvantages than advantages using this kernel, then please consider using FXP kernel instead.
Features (quoted directly from DuMOHsmol's Rage Kernel original post here ) :
DuMOHsmol said:
This is my kernel, it's based on stock SE 4.0.2.A.0.74 kernel sources, with some things from DoomKernel by DooMLoRD (so go and say thanks to him, and other developers too).
It has:
- Overclock up to 2Ghz
- CWM Recovery 5.0.2.7
- Prerooting
- CPU Governors:
brazilianwax
smoothass
smartassV2
SavagedZen
interactiveX
lagfree
minmax
Scary
smartass
interactive
conservative
userspace
powersave
ondemand
perfomance
v2 added:
- Xperia Mini support
- Tun/tap interface enabled (VPN, ipv6)
- Swap support enabled
- Two way call recording support added
- I/O schedulers:
noop
anticipatory
deadline
cfq
bfq
vr
sio
v2.1 changed:
- disabled NFS and CIFS (battery drain fix from DoomKernel), let's see if it can really increase battery life.
v2.2 changed:
- moved to from 4.0.2.A.0.58 to 62 source, though I didn't see any changes
- added 0% battery workaround patch by Bazoocaze. I don't even know what it does but it seems to be something useful since everyone includes this in their kernels
- New cpufreq driver from DoomKernel. You can experience some problems with overclocking now (my phone becomes unstable at 1.8GHz now, instead of 2.0), but phone eats much less battery in sleep. I've also changed 1018Hz to 1024Hz and 249Hz to 245Hz because those new numbers looked wierd
v2.3 changed:
- moved back to 4.0.2.A.0.58 source (just to make sure that everything will work).
- updated version number in ramdisks to 62.
- removed 0% battery workaround patch (it's useless on our devices).
- reverted old cpufreq driver with small fix. It should be stable now and phone seems to eat less battery than in 2.1. (thanks himasura for lots of testing)
- salvaged some ram.
- enabled NTFS support.
- enabled usb-storage driver, so you don't need to manually load usb-storage.ko now.
- Version number now shows version of kernel (#23=2.3).
v2.4 changed:
- Now phone lights up blue led to show when you can enter recovery (thx to DooMLoRD).
- Minor changes in ramdisks.
- Enabled hid drivers for microsoft and a4tech.
v2.5 changed:
- Re-added CIFS
- Enabled ext4 support
- Added zram and cleancache drivers
- Added lulzactive governor
- Root fs now mounts as rw after boot.
v2.6 changed:
- removed lulzactive governor as it wasn't working properly (thx to kamarush and others for pointing that)
v2.7 changed:
- moved to sony 4.0.2.A.0.74 kernel sources (updated touchscreen driver)
- Increased GPU dedicated memory to 4MB
- Updated su binary in autoroot.
v2.8 changed:
- added new cpufreq driver at last (with CPU frequency fixup by DooMLoRD), battery drain is lower now. I left version 2.7 too for those who want higher overclock or have some problems with 2.8.
Everything else is similar to stock kernel for now.
Click to expand...
Click to collapse
A bit background:
I use FXP CM7 rom for my mini pro since release 049 and like it very much. One thing that made me keep switching back to stock rom was the high battery drain, because in my daily activities electric plug is not always readily available, so battery life is critical for me.
In fxp 052 I got a bit desperate and trying to use custom kernel based on stock from bbooff here, with fxp rom. The battery life is excellent, just like stock rom, but I encountered 2 problems: touchscreen sometimes become unresponsive and wifi was not working (even if I replaced wifi modules with stock).
Finally, I decide to learn how to compile android kernel, and I found that it is quite similar with compiling linux kernel, which I've frequently done to my computer and laptop.
So, I compiled kernels from 3 sources and compare the battery life in my mini pro. They are from DoomLord's official SE source, DuMOHsmol's Rage kernel source, and krizky82's X Kernel source. I also recompiled kernel from FXP kernel source using stock semc_mango_defconfig, to see if battery life is better. The conclusion is that best battery life is achieved using stock and Rage Kernel, and I've been using FXP with rage kernel since release 102 and haven't considered going back to stock rom again.
I posted in Rage Kernel thread to thank DuMOHsmol, and since then there's 3 xda members that ask me to share this kernel, so I make this thread.
I hope this could help those who want to use FXP CM7 and need a battery life that's close to what stock rom offer.
Note:
As of release 114/115, FXP kernel also has better power management and quite a good battery life. The power consumption difference between this rage kernel and fxp kernel is not as much as it used to be before. In case of broken features or any problem caused by using this kernel in FXP cm7 rom, then please consider using FXP kernel instead.
hi ,after flash your kernel ,my device have a boot-loop,please check it ,thank you
zhanglz0904 said:
hi ,after flash your kernel ,my device have a boot-loop,please check it ,thank you
Click to expand...
Click to collapse
Okay, I'll check it. I might zip the wrong file. What is your device? I assume it is mini / st15? Because kernel for mini pro works fine in my mango. I'll check and if needed I will re-compile it.
Edit:
I think the problem was I incidentally used wrong ramdisk for mini kernel.
I have made a new kernel for mini, but it needs testing first. So, if anyone's willing to test it, please send me a PM. Thank you...
Edit:
Fixed. Link for mini updated.
Thank you!!
Im using cyanogen fxp 111
Only need flash the kernel?
Or need make a full wipe?
edwarddd said:
Thank you!!
Im using cyanogen fxp 111
Only need flash the kernel?
Or need make a full wipe?
Click to expand...
Click to collapse
You are using mini pro, right? I'm still fixing kernel for mini.
You don't need to do a full wipe, just wipe the cache partition.
Yes im using the mini pro
Thanks!
thanks a lot.even i was switching back to stock because of the battery drain ..will try this on my mini pro today
i am using fxp111 on my st15i,thank you for your great work .
zhanglz0904 said:
i am using fxp111 on my st15i,thank you for your great work .
Click to expand...
Click to collapse
Mini kernel is fixed. Link is updated. Please test it and let me know if you encounter any more problem. Thank you for your feedback...
greenAlgae said:
Mini kernel is fixed. Link is updated. Please test it and let me know if you encounter any more problem. Thank you for your feedback...
Click to expand...
Click to collapse
hi ,greenAlgae ,i am sorry to tell that i encountered the same problems with using your fixed kernel ,it may not the ramdisk,but the drivers,i think .
by the way ,some of us using the rage kernel have encountered the same problem,they aslo "complained" the boot-loop ,so i think the problem is kernel itself not the the ramdisk ,i am very happy if you will fix it ,thank you much .respected your work
zhanglz0904 said:
hi ,greenAlgae ,i am sorry to tell that i encountered the same problems with using your fixed kernel ,it may not the ramdisk,but the drivers,i think .
Click to expand...
Click to collapse
what is the problem?
im install fixed kernel and everithing working.
no bootlop or error during boot.
zhanglz0904 said:
hi ,greenAlgae ,i am sorry to tell that i encountered the same problems with using your fixed kernel ,it may not the ramdisk,but the drivers,i think .
by the way ,some of us using the rage kernel have encountered the same problem,they aslo "complained" the boot-loop ,so i think the problem is kernel itself not the the ramdisk ,i am very happy if you will fix it ,thank you much .respected your work
Click to expand...
Click to collapse
Is there any error when you flash it using fastboot? Did you get to boot logo only or you get to cyanogen boot animation when the phone bootloop?
wucinac said:
what is the problem?
im install fixed kernel and everithing working.
no bootlop or error during boot.
Click to expand...
Click to collapse
Thank you wucinac. It seems there's some kind of inconsistencies here. Hopefully it can be worked out, else i would have to pull out the kernel for mini altogether.
Sent from my SK17i using XDA
For st15i i have to use fastboot query with flag:
Code:
fastboot -i 0xfce flash boot boot.img
fastboot -i 0xfce reboot
P.S. Rage flash'ed without any problems. Kudos to developer, many thanks for merging battery save and direct call record!
oh great! Let's test!
gqcJYb3UN8xSIWNUy2xX said:
For st15i i have to use fastboot query with flag:
Code:
fastboot -i 0xfce flash boot boot.img
fastboot -i 0xfce reboot
P.S. Rage flash'ed without any problems. Kudos to developer, many thanks for merging battery save and direct call record!
Click to expand...
Click to collapse
So, it does work for mini after all, right?
All credits goes to original devs. It was DuMOHsmol who added the features, so your kudos goes to him
Snoopo said:
oh great! Let's test!
Click to expand...
Click to collapse
Yes sir, please test it and kindly let me know how it goes . Any feedbacks - even negative ones - will be much appreciated
Sent from my SK17i using XDA
So long time ago i using stock rom, and rage kernel are the best, i think that are the best kernel
For stock neves restart the phone on overclock , i dont back to stock rom never thanks!!
Sorry for my bad inglish
edwarddd said:
So long time ago i using stock rom, and rage kernel are the best, i think that are the best kernel
For stock neves restart the phone on overclock , i dont back to stock rom never thanks!!
Sorry for my bad inglish
Click to expand...
Click to collapse
Well, overclocking is the feature that I very rarely use. Because I use this kernel for better battery life, and overclocking might just negated that
But I'm glad that it works for you
Sent from my SK17i using XDA
greenAlgae said:
A bit background:
I use FXP CM7 rom for my mini pro since release 049 and like it very much. One thing that made me keep switching back to stock rom was the high battery drain, because in my daily activities electric plug is not always readily available, so battery life is critical for me.
In fxp 052 I got a bit desperate and trying to use custom kernel based on stock from bbooff here, with fxp rom. The battery life is excellent, just like stock rom, but I encountered 2 problems: touchscreen sometimes become unresponsive and wifi was not working (even if I replaced wifi modules with stock).
Finally, I decide to learn how to compile android kernel, and I found that it is quite similar with compiling linux kernel, which I've frequently done to my computer and laptop.
So, I compiled kernels from 3 sources and compare the battery life in my mini pro. They are from DoomLord's official SE source, DuMOHsmol's Rage kernel source, and krizky82's X Kernel source. I also recompiled kernel from FXP kernel source using stock semc_mango_defconfig, to see if battery life is better. The conclusion is that best battery life is achieved using stock and Rage Kernel, and I've been using FXP with rage kernel since release 102 and haven't considered going back to stock rom again.
I posted in Rage Kernel thread to thank DuMOHsmol, and since then there's 3 xda members that ask me to share this kernel, so I make this thread.
I hope this could help those who want to use FXP CM7 and need a battery life that's close to what stock rom offer.
Click to expand...
Click to collapse
I have installed your kernel on my sk17i .. with FXP 111, but overclocking is set to 1024?
v2 Released. Scroll down for info!
Hello,
After lots of help from sirkay and FXP, I've built my own kernel that I thought I'd share with you.
This kernel wouldn't exist without the hard work of FXP. This is built from his source code. All real credit for this belongs with him (and DoomLord too, also an FXP Team member)
That said, this is my take and keeps the rather awesome release that is CM7.2 alive!
To be clear: This is a kernel for Cyanogen Mod 7.2 - Gingerbread! If you want a good ICS Kernel look at Sirkay's Thread.
So, what's different?
Uses a very recent GCC to compile, GCC version 4.6.3 which I optimised the build for Cortex-a8 and NEON.
Is compiled for performance not size (Optimize for size unticked)
Heap Randomisation is disabled.
Enabled SWAP - So you can use swap if you want to...
Default Scheduler changed to deadline, same as the Sony official kernel (still has bfq if you want to use it)
Default governor changed to ondemand.
CONFIG_OABI_COMPAT turned off. (This might break apps, haven't found any yet though)
Disabled CPUFreq Debugging.
Disabled FRAME_POINTERS, enabled STACK_UNWIND. Reason here: http://lists.openmoko.org/nabble.html#nabble-td6126708
There is no boot logo when this kernel boots. Each time I added one, the kernel refused to boot. I'll look at that. Just have patience, your phone is booting still...
(Here's where I make lots of stupid claims about how smooth, how buttery, how much battery life this kernel saves. Except I'm not a screaming idiot, so I'm not going to do that!)
I'm interested in any feedback you have, but I did this mostly for me.
And please remember the real person to thank, FXP. It's his source code I've used to build this. Also again thanks to Sirkay for his help and pointers.
Download it from here.
- muppet
Nice Kernel what's battery performance ??
aditya080908 said:
Nice Kernel what's battery performance ??
Click to expand...
Click to collapse
About the same as every other kernel.
OTG support? ?!
Sent from my ST18i
so good, This is what I looking for
@muppetmania attach here you png file. i can try to convert it to .rle for you
Could GB MIUI have the privilege?
Could we have a CM7 based MIUI 2.3.7 kernel?
I think GB MIUI works just fine and don't want to upgrade to ICS or JB.
But a better kernel for GB MIUI is always appreciated.
Thanks in advance,pls let us know if you'd be willing to.
Anoopnk said:
OTG support? ?!
Click to expand...
Click to collapse
If you'd like me to respond to questions, please post an actual articulate question in the first place. Cheers.
Yes, I'm aware I'm a ****, it's been pointed out to me already
sirkay said:
@muppetmania attach here you png file. i can try to convert it to .rle for you
Click to expand...
Click to collapse
Thanks sirkay, but the problem isn't that I can't make a rle file, it's that the rle file when added to the ramdisk stops the kernel booting. It seems to a bug in the SEMC loader, I found a post about it somewhere. Does the boot.img need to be padded out to a certain size to work?
Sometimes my logo.rle would work, but then I'd make changes, recompile, and the kernel would hang on boot. Annoying, so I've removed it for the moment.
rivtre said:
Could we have a CM7 based MIUI 2.3.7 kernel?
I think GB MIUI works just fine and don't want to upgrade to ICS or JB.
But a better kernel for GB MIUI is always appreciated.
Thanks in advance,pls let us know if you'd be willing to.
Click to expand...
Click to collapse
Hi rivtre,
I'd love to help, but my Ray is the only phone I have and is running CM7.2. While I could make a kernel for MIUI I'd have no (easy) way to test it. It wouldn't be fair to anyone if I started releasing untested things. So I'm sorry, it's not that I don't want to help, but no. Anyway, read the next bit to see why that's probably not a bad thing!
To All:
My kernel seems to be terrible when it comes to HD video recording. Can anyone else test this? I get heaps of dropped frames using my kernel when recording HD video vs a FXP Stock kernel. I need to look more at this, but for the moment I'd recommend not using this kernel!
v2 Released!
Version 2 of muppet kernel released.
What's new?
Compiled with GCC 4.7.1
Reverted to BFQ Scheduler by default
Reverted to Interactive CPU Scaling by default
Added logo.rle so you know it's booting!
Removed Debugging Symbols (CONFIG_KALLSYMS)
Reverted the scheduler and CPU scaling as they seemed to be the cause of the video recording lag.
Enjoy!
Download
does the kernel also work with this rom http://forum.xda-developers.com/showthread.php?t=1424121?
can I flqsh the kernel with flashtool?
is overclocking possible?
borg17a said:
does the kernel also work with this rom http://forum.xda-developers.com/showthread.php?t=1424121?
can I flqsh the kernel with flashtool?
is overclocking possible?
Click to expand...
Click to collapse
Not sure if it works with the stock ROM or not - try it and report back.
Yes, like all kernel images, you can flash it with Flashtool.
You can OC up to 1.6Ghz.
I tried it, but It doesn't work. Booting failed
muppetmania said:
Not sure if it works with the stock ROM or not - try it and report back.
Yes, like all kernel images, you can flash it with Flashtool.
You can OC up to 1.6Ghz.
Click to expand...
Click to collapse
borg17a said:
I tried it, but It doesn't work. Booting failed
Click to expand...
Click to collapse
Oh well sorry. It's only for CM7.2
muppetmania said:
Version 2 of muppet kernel released.
What's new?
Compiled with GCC 4.7.1
Reverted to BFQ Scheduler by default
Reverted to Interactive CPU Scaling by default
Added logo.rle so you know it's booting!
Removed Debugging Symbols (CONFIG_KALLSYMS)
Reverted the scheduler and CPU scaling as they seemed to be the cause of the video recording lag.
Enjoy!
Download
Click to expand...
Click to collapse
Just flashed your kernel, going to give a test run! thanks!!
Edit:
Well it doesn't seem to me that the camera recording works at all ... pictures = fine - but when trying to record video - the image freezes - and the camera app crashes.
I have to reboot to get back into the camera app...
Also, can't play any video I previously recorded...
Anything I'm missing?
I've flashed your kernel and did a cache + dalvik wipe...
Cheers!
Apocalyps2 said:
Just flashed your kernel, going to give a test run! thanks!!
Edit:
Well it doesn't seem to me that the camera recording works at all ... pictures = fine - but when trying to record video - the image freezes - and the camera app crashes.
I have to reboot to get back into the camera app...
Also, can't play any video I previously recorded...
Anything I'm missing?
I've flashed your kernel and did a cache + dalvik wipe...
Cheers!
Click to expand...
Click to collapse
Oh, well that's not the sort of feedback I wanted!
I haven't done much video recording the last couple of weeks (I've been away from work)
Let me do some testing and see what I can find...
Thanks for reporting
If you want a logcat I'll make one and get it to you , cheers
Sent from my ST18i using xda app-developers app
GPS
i just install your kernel on my phone...but why my GPS cannot running well
a1nx said:
i just install your kernel on my phone...but why my GPS cannot running well
Click to expand...
Click to collapse
why your bug reporting so terrible
a1nx said:
i just install your kernel on my phone...but why my GPS cannot running well
Click to expand...
Click to collapse
Update baseband to 75 or 77 ...reflash kernel !!!
Have fun !!
Sent from my ST18i