Related
I did all that rooting crap. Now when I press the power putton, it flashes the "Samsung Vibrant" Image, then plays the tmobile tone, but no "S" image appears. And it stays black. How do I fix this?
define "all the rooting crap"? Did you flash a Voodoo Rom and try to flash something else on top of it?
There is NO way to tell you what you need to do unless you tell us what you did.
But based on what you have described.. Gonna say u are SOL.
Use odin to flash stock rom then start over. I have been stuck on that screen a couple times. Lol
Sent from my SGH-T959 using XDA App
Truth be told
Anthony is right. i had this issue earlier this week when trying to flash a mod to my phone. Odin is the only choice at this point.
This has happened to me twice, most recently after "fixing permissions" in the oclf market program. Both times I've rectified by booting into recovery and "reinstall packages". Both times I also removed sim and sd and after a couple repetitions of package reinstall it comes back to life. Maybe dumb luck, maybe not, worked twice...
Sent from my SGH-T959 using XDA App
Correction, fixing permissions in Rom Manager...
Sent from my SGH-T959 using XDA App
Also...My Vibrant Wont Turn On
Dear All
I am new to this forum and need some assistance. I recently bought a T-Mobile Vibrant from a friend who had brought it with him for the US. I am using it in the Middle East where I live at the moment.
I have been reading a lot in the past few weeks about the Vibrant and almost everything there is to know. It seems there is always more to discover.
Back to the issue at hand. I had been having problems with getting my phone to reboot into recovery mode but I finally managed to do so last night. I wanted to flash my phone with Axura 2.1E, Nero V2 or the Macnut v14, so I can use the the Black Froyo theme on it.
First, I flashed the original firmware (T959...JDF) which I got off your site, using Odin v1.3. That worked as it should. Then I proceeded to follow instructions to download the ClockworkMod from this thread: [RECOVERY] ClockworkMod Recovery for Vibrant (FINAL! SAFE!)
After I copied the CWM file to the Internal sd card, I downloaded Rom Manager, rooted the phone with Z4root, chose the Samsung Vibrant in Rom manager and clicked install ROM from sd card. it rebooted into recover mode (blue writting), I clicked 'reinstall packages', which it did and it rebooted into the ROM recovery mode (green writting). I chose the option to install zip file from sd card, then chose Axura 2.1E and it installed until it said complete.
So far everything was working as it should, or at least that was the impression I got. I am not sure of this next step. It said installation complete, so i chose 'go back', then 'reboot device'. When it went into reboot, nothing happened...just a black screen. It wont start, neither normally, not into any other mode (recovery or download). i plugged it into the charger and not even the battery icon would come up. i assume that it is...'dead' and I just did the impossible. I tried several ways and combinations to get it back to life somehow, but I have a feeling that's it.
Any suggestions, advice, remedies, whatever help...even condolences would be much appreciated..
Much appreciated and all the best to all.
Cheers
What the heck is up with all these HARD BRICKs?
Past few days, I keep reading people who have appeared to truely HARD BRICK their phone.
Meaning they can not get into download mode, they can not use odin, they are truely hard bricked.
What is up with the sudden surge of hard bricks.
This guy sounds like he did everything correct.
Scary.
Ya I've seen a lot of those also... could it be a newer version of the Vibrant? Yes he did everything correctly... he could try a jig.. its only maybe 10 bucks? worth a try at least...
My Vibrant wont turn on
Thanks guys for the reply to my post. I was thinking today that even though I did follow instructions correctly, that I might have missed a step at the end.
My thoughts went to the fact that after the installation of my chosen ROM (Axura 2.1E) was complete, I was given the choice of installing update.zip again, along with some other ones which I forgot what they were and the option to 'go back'. I went 'back' and pressed reboot device.
If the installation was fully complete, would not the phone go into automatic reboot?
Anyways seem like the boot is screwed and I am getting help from a friend to get it back to life again.
Anyone can confirm what to do after I install a 'ROM' successfully. Is there another step afterwards which I must be aware of to fully complete the flash?
Cheers again
Hey I got a old stock rom from off one of these forms off xda... for my samsung vibrant... After i flash the rom odin said reset and the vibrant never turned on.... its been like this for a day now... the battery sign dosent even turn on... what can i do..
hellobitchdog said:
Hey I got a old stock rom from off one of these forms off xda... for my samsung vibrant... After i flash the rom odin said reset and the vibrant never turned on.... its been like this for a day now... the battery sign dosent even turn on... what can i do..
Click to expand...
Click to collapse
Get into download mode try again,
if not try getting the files from a different source
Sent from my SGH-T959 using XDA App
Sent from my SGH-T959 using XDA App
Hey everyone...
I need help.. And its not my phone nor do i have it in my possession... Kinda troubleshooting over the phone... My nephew got a samsung vibrant... Got his phone rooted and had Darky's v7.7 Gingerbread Edition rom running... It booted up ran for a bit had a LOGSPROVIDER error stopped unexeptedly message....
He shut the phone off then rebooted and it wont boot past the first boot screen... HE also cant get into recovery but download mode works fine..
Possible solutions..?
Well if he can get into download mode the he should just odin back to stock and reinstall the rom!
Sent from my SGH-T959 using XDA App
Thats what I was thinking... Im not familiar with samsung phones.. Whats the purpose of download mode?
Safety feature? I presume..
I find it odd though that it booted fine and was ok until he rebooted and it wouldnt load... Any specific reason that could happen
Nah if you read the disclaimers devs put up it clearly says "i am not responsible for bricking, etc."
So no, there should be no specific reason why your nephews phone won't boot, more unless he was running a lag fix and flashed the wrong zip or whatever then yeah...
But download mode is I guess a fail-safe for samsung if the phone bricks or anything, afterall the vibrant is nearly impossible to fully brick
Sent from my SGH-T959 using XDA App
Thank You for the help...
He opted to call tmo and there sending a replacement.. Then asked him if he bricked the phone... He played dumb.. and said he rebooted the phone and it wouldnt load...
And yes i know about the devs disclosure... Got myself a mytouch slide which just finally got s-off courtesy of ALPHAREV woohoo.. Also have a G1 from back when it first came out.. SO i got plenty of rom downloading under my belt
hellobitchdog said:
Hey I got a old stock rom from off one of these forms off xda... for my samsung vibrant... After i flash the rom odin said reset and the vibrant never turned on.... its been like this for a day now... the battery sign dosent even turn on... what can i do..
Click to expand...
Click to collapse
This same thing happened to me. I read about making a jig, yeah right. So I continued for the better part of three hours plugged into my computer with data cable continuing the same motion that I would to get into download mode. And finally I got the download dude. I used the s1.odin somthing .pit file I think it was the first .pit to come out. Not the 512.pit Along with the first .jar. Anyway keep trying to get into download mode even with a black screen, can be done.
Sent from my SGH-T959 using XDA App
Hello everyone. Forgive me if this is in the wrong section, but this is my first time posting. I tried to apply the Voodoo Lag Fix, and I got up to the point where the voice told me that the conversion was successful, but it was stuck at the Vibrant screen for a really long time, so I pulled the battery and tried to run it again. Now it's been stuck at the Vibrant Screen for a really long time now. Should I Odin back to stock or should I continue to wait to see if it resolves itself?
Thanks!
You're absolutely right. This should be in q and a.
What exactly is a really long time? Because like 5 minutes is normal after applying voodoo. But anyways you soft bricked it.
This happens to a lot of people by the way and you do need to use odin.
Download eugene373's froyo that doesnt brick. In odin click the repartition box and set it up and flash that.
Once done uncheck repartition in odin and set it up to flash the original jfd rom (not the ji6)
If you need instructions on how to set up and use odin search in the bible sticky thread. There are tutorials there.
And next time search is your friend. This has been answered hundreds of times.
Good luck.
Sent from my GT-I9000 using XDA App
Soft brick
Bob u might try wiping user data in samsung recovery. That seemed to do the trick for me when I had the same problem.
Good luck!
Aaron
AaronMFeld said:
Bob u might try wiping user data in samsung recovery. That seemed to do the trick for me when I had the same problem.
Good luck!
Aaron
Click to expand...
Click to collapse
I did what you suggested, and when I rebooted the phone, it told me that the conversion was successful, then proceeded to be stuck on the vibrant screen forever again. Looks like I'll be Odining this...
Odin to Eugenes froyo will fix you. Then reinstall your ROM. Voodoo will take a LONG time to install just wait it out.
Sent from my SGH-T959 using XDA App
stuck at vibrant screen
Hi guys,
I am having the same problem and im very desperate right now, my vibrant cant seem to get past the Vibrant screen, and it just loops back to vibrant screen.. after trying to install jk2 rom... please help me guys.,.. my email is [email protected]
Read post #5! If that isn't enough then go here...
http://forum.xda-developers.com/showthread.php?t=771111
I thought my phone bircked because it stock on Vibrant sign, for about 15 mins, I already went to this forum and was getting Odin , then suddenly it said "Succesful" in female voice. And it booted Guys you need more patience , and I used ROM Manager with Axura 2.0.6 rom
Installed the DoW kernel over Bionix-v and wound up in a boot loop, unable to get into recovery, but I was able to get into download mode. Tried using ODIN to flash back to stock, but it won't boot past the 1st Vibrant splash screen.
The ONLY rom I've been able to boot is Eugene's JK2+2e Froyo ROM, but it's not recognizing both the internal and external storage (shows unavailable). I'm assuming this is due to ODINing with voodoo enabled, so I tried flashing one of SuperCurio's voodoo kernels on top, but that seemed to have no effect.
I've tried using Eugene's Froyo that doesnt brick and then downgrading to stock JFD, but it still refuses to boot, same as if I negated the Froyo step. I'm fairly lost as to what my next step should be besides randomly changing settings, but I dont want to get to a state where I can't enter download mode.
ANY help anyone can provide would be amazing and greatly appreciated, and I can of course provide any additional information that would be helpful.
Odin needs time. Odin is your solution.
Sent from my SGH-T959 using XDA App
Thanks for the response, but could you be more specific? I'm aware that ODIN is the solution, because I'm unable to flash anything in recovery.
torturedsoul802 said:
Thanks for the response, but could you be more specific? I'm aware that ODIN is the solution, because I'm unable to flash anything in recovery.
Click to expand...
Click to collapse
Sure. If it was me id download an older odin version. Just try it. Id also go back to stock.
Remember to back up a program to root.
I still use odin 1.3 myself. Works every single time.
Let me know.
Sent from my SGH-T959 using XDA App
Using Odin 1.7 now, I'll try 1.3 and report back on that. The problem is, every time I attempt to revert back to stock (JFD or JI6), the phone refuses to boot, shows Vibrant splashscreen for ~1.5 sec and then shuts off. No boot animations.
torturedsoul802 said:
Using Odin 1.7 now, I'll try 1.3 and report back on that. The problem is, every time I attempt to revert back to stock (JFD or JI6), the phone refuses to boot, shows Vibrant splashscreen for ~1.5 sec and then shuts off. No boot animations.
Click to expand...
Click to collapse
Keep trying. It will work eventually for no reason.
Sent from my SGH-T959 using XDA App
Leave it alone for at least 5 to 10 min on splash screen. Sometimes that takes a while.
Sent from my SGH-T959 using XDA App
mr.orange303 said:
Leave it alone for at least 5 to 10 min on splash screen. Sometimes that takes a while.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
15 max
Sent from my SGH-T959 using XDA App
Would you recommend flashing Eugene's Froyo that does not brick first and then flashing stock on top? Or straight to flash? And should "re-partition" be checked at any point, since the ext4 system needs to be rebuilt to RFS.
torturedsoul802 said:
Would you recommend flashing Eugene's Froyo that does not brick first and then flashing stock on top? Or straight to flash? And should "re-partition" be checked at any point, since the ext4 system needs to be rebuilt to RFS.
Click to expand...
Click to collapse
No to repartition on my end. But u may want to ask about the ext4 going back to rfs. Ive always done it in cwm honestly.
Someone else with more expirience will have to answer that.
But I have never and read it doesnt need to be done.
Sent from my SGH-T959 using XDA App
Tried, still wont turn on on stock, just vibrant screen.
torturedsoul802 said:
Tried, still wont turn on on stock, just vibrant screen.
Click to expand...
Click to collapse
Its not bricked. Keep trying.
Sent from my SGH-T959 using XDA App
mr.orange303 said:
Its not bricked. Keep trying.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
+1. If your phone boots at all it's in my experience 100% recoverable. I own a RIFF box as well so if you brick it dead then I can still fix it... . I'll be getting a video up on ODIN usage for Vibrant/i9000 owners tomorrow. Check out my Boot Logo video on my website for a little bit of ODIN usage to give you an idea. You just need to open ODIN. The put the phone in download mode and plug in via USB. Then select your PIT and PDA file and click start. Then you can reflash stock firmware. PM me as I offer this as a service as well.
Thanks for the reply. Usage of ODIN is not my problem, the problem is that flashing to JFD (whether I use Eugene's Froyo 1st or not) results in a failed boot. The phone shows the 1st Vibrant splash screen for ~2 sec and then shuts off. No process I have tried results in a successful stock boot.
Thinking about trying both of these:
http://forum.xda-developers.com/showthread.php?t=823300
http://forum.xda-developers.com/showthread.php?t=940671
HOPEFULLY, one of these will let me get into CWM or access the filesystem in order to disable Voodoo.
Once again, if anyone knows of a way to revert EXT4 -> RFS through ADB or download mode, please let me know!
Well I have been working on it for a day straight and no luck. I have talked to several people and the phone has readonly partition now so it is ****ed! Nand death! I called T-Mobile yesterday and told them I have know idea why but my phone won't turn on, blah, blah, blah. So they are going to replace it under warranty and it will be here in a few days.
torturedsoul802 said:
Thinking about trying both of these:
http://forum.xda-developers.com/showthread.php?t=823300
http://forum.xda-developers.com/showthread.php?t=940671
HOPEFULLY, one of these will let me get into CWM or access the filesystem in order to disable Voodoo.
Once again, if anyone knows of a way to revert EXT4 -> RFS through ADB or download mode, please let me know!
Click to expand...
Click to collapse
Hey, thank you so much for posting this up. These are great finds. I'd be more inclined though, to just call Tmobile and get another phone. I'm really tired of messing with the phone. I don't have time to be messing with this anymore.
The fact that I can get into download mode may be good news, but it does nothing for me right now. With what we know about bricking and unbricking phones, I've thrown every trick I know at it already. I hope you get it fixed, but I"m not messing with it anymore.
drewdude007 said:
Well I have been working on it for a day straight and no luck. I have talked to several people and the phone has readonly partition now so it is ****ed! Nand death! I called T-Mobile yesterday and told them I have know idea why but my phone won't turn on, blah, blah, blah. So they are going to replace it under warranty and it will be here in a few days.
Click to expand...
Click to collapse
Yeah man, me too. I'm getting this thing exchanged. It's a paperweight right now. My phone is doing exactly the same thing.
Can you recap one more time? You are only having problems flashing a custom ROM? You said ODIN is not the problem so I'm taking it you could flash back to stock if you wanted to?
Size matters.
Hey, I haven't posted in here before, I've been a member for a while, just never had anything to contribute. So I got the whole soft brick problem. I spent countless hours trying to get into download mode. The size of the usb cable matters, I was using an LG Optimus cord, and my buddy tried his blackberry cord which had much more gerth, and BAM download mode everytime no problem. Maybe this might help some of you out there.
Also I would like to say, thank you for everyones hard work. I had to roll back to stock roms, and just got the Froyo.UVKA7 to work. I love it, it's quick, it's got color in the settings menu. I wanted to cry... Everyone that has ever had anything to do with the developement to make Android better. THANK YOU!
Absolutely,
I am having problems with the phone starting up and loading what I flashed.
I flashed JI5 Ji6, and Eugene's non bricking Froyo Rom
These 3 are the only ones I was able to find that is ODIN flashable
Why you ask?
I cannot get into Recovery, but I can get into Download mode. I can't get into any recovery at all. NOTHING. This is why ODIN seems to be my only option.
But regardless of any ROM i flash, my phone shuts off right after the Vibrant screen. No splash screen, no loading, no booting. .Nothing. It just shuts off.
I can't charge it either.
i get a Charging bootloop. HOurglass - battery shows up for a bit, then restarts over and over.
So in other words. it's ****ed.
Hope that explains it sufficiently. if you have any more questions or suggestions, Im open man, Im open.
Help me
connexion2005 said:
Can you recap one more time? You are only having problems flashing a custom ROM? You said ODIN is not the problem so I'm taking it you could flash back to stock if you wanted to?
Click to expand...
Click to collapse
Hi all
I'm not new to flashing but I'm new to flashing cm7.
I odin back to stock jfd eclair. Root and Install CWM 2.xxx. I downloaded the stable cm7 and I started flashing. (after I wipe data/cache of course)
IN recovery, it said finding package, opening package, then my phone processed a series of lines and reboot automatically. On the startup, it says VIBRANT SAMSUNG, then GALAXY S CYANOGEN(mod) then the same recovery screen with many lines. It moved too fast into another reboot I couldn't read what was on the screen. And it kept doing this for quite 10 mins now.
Is it normal? if not, what did I do wrong? I can get into download mode and odin back to stock but I did it last night and I couldn't think what i did wrong.
Please help!
Hmmmm..... seems a bit wierd, try going into recovery and wiping and reinstalling with a new download.
Sent from my Nexus S 4G using XDA App
stumpyz9 said:
Hmmmm..... seems a bit wierd, try going into recovery and wiping and reinstalling with a new download.
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
No i don't think its a bad dl. I checked md5. I'm odin back to stock again now.
wavestar92 said:
No i don't think its a bad dl. I checked md5. I'm odin back to stock again now.
Click to expand...
Click to collapse
Try reflashing cwm when your rooted, may have not flashed right
Sent from my Gewgle Phone via XDA App
This happened to me also, I went directly back to recovery, 3 button, and reflashed. Worked the second flash for some reason.
Thanks. I turn it off, get into recovery again, and re flash it successfully
Same exact thing happened. I have no idea how many time I odened back to stock trying to figure it out.
I did as you guys said, as soon as that loop began, pulled the battery and got back into recovery. flashed again and worked just fine!
same thing happened to me...i got back into recovery...i noticed cwm updated to 5.0.2.8 then i reflashed and all good...when i tried to flash at first. cwm was 2.5 ..maybe thats the issued it wont flash on that...has to be cwm 5.0
anyway getting ready enjoy some cm7 on my vibrant...
major problem.
i flashed team perfection objection ics rom. felt that i wanted to go back to stock and thats when the problem showed up.
i havent flashed any other custom rom before the objection ics. i came from stock rooted telus.
tried flashing the tar file from this thread
[STOCK][ODIN][GB][Telus] For those who wish to revert to stock Telus
http://forum.xda-developers.com/showthread.php?p=27508953#post27508953
- sometimes odin freezes but when it doesnt and actually finishes flashing, phone wouldnt start up after the automatic reboot. (how long should i wait for the initial boot to start? i wait for about 2-3 minutes of nothing but black screen before resetting)
i tried flashing the backup files from this thread
[ROOT]For TELUS Note (i717D) - No Flash Counter
http://forum.xda-developers.com/showthread.php?t=1585440&highlight=telus+rooted+system
- after flashing, boots but gets stuck at the "touch the android screen to begin"
anybody have an idea whats going on?
tried 2 different stock tar files through odin and i cant get any of them to work.
i flashed back to the objection rom through cwm to make sure that my phone isnt bricked or anything. seems to be working fine. havent tried any other custom roms though.
any help would be appreciated.
thanks
Hi you may have a partition that is corrapted or there may be something wrong with that telus Odin flash. Go to dev section. There is another Odin flash for telus. It is a stock telus rom rooted that is flashed through Odin. It does work, I hav e used: t before. I will send you a link when I get home from work.
Sent from my SAMSUNG-SGH-I717 using xda premium
I use to have a telus note now I have a rogers note. I may still have a back up of a telus rom. Will check my computure when I get home
Sent from my SAMSUNG-SGH-I717 using xda premium
I may have found your problem. When using Odin, and flashing a backup file, it does not format your phone partitions. So you first have to go into cwm and do a factory wipe, wipe dalvik and go into advance and wipe the other dalvik . Do a battery pull, and now put your phone into download for Odin. I have telus kernel, telus modem and telus stock recovery that can be flashed in cwm. Just not sure if I have the stock from still. Pm me if you have any questions
Sent from my SAMSUNG-SGH-I717 using xda premium
Just a update wipe data, wipe cache and wipe dalvik cache before you use Odin to flash a rom. I told you partly wrong in precise post
Sent from my SAMSUNG-SGH-I717 using xda premium
thanks for the help guys
thanks for the help guys.
i dont know if its a partition problem though but it really got me worried.
for some reason i got it to flash properly and it booted up with no problems.
now im thinking thats its the odin software that was causing the problems. the first one that i used to root my phone a couple of weeks back had an "evo 4g" title at the top. it didnt gave me any problems back then so i ignored it. and thats the same one ive been busting to use last night to flash back to stock. anyhow, i tried using a different odin3 that has "android+slp" label on it and i noticed that it was freezing less and actually finishes the flashing but the bootup still has some problems. i get stuck at the bootup logo for a couple of tries. after sometime i just flashed it over and over again until i hit the jackpot.
is there anyway that i can check if my partitions are still broken? im thinking that i wont be doing any flashing until the update comes in july. the ics roms arent stable enough for me anyway.
oh what do i do if wanna get the official ics update? i have stock system, i think, but its rooted. do i just flash stock kernel and unroot it?
i found an article in lockermikedotcom that allows you to unroot using a batchfile. i was wondering if you guys can point me in the right direction. thanks
If you have a stock rom but it is rooted, flashing a stock kernel usually does not remove root. You would have to install stock recovery first and then you adb to remove the superuser and busbox files from your phone to get it totally stock like it was before you rooted it. This batch file DooMLord_v1_unrooting_zip will unroot your phone .It work on the Rogers Note anyways. http://www.mediafire.com/download.php?7ysrb3v7tfu9t1a