I am Fu fusing with this and I had 3 question
1. before I install cm7 I have to wipe cache and data???
2. After flash cm7 I flash the gaps???
3. Before install Franco.kernel I should wipe datanand cache again??????
Th3-Famous809 said:
I am Fu fusing with this and I had 3 question
1. before I install cm7 I have to wipe cache and data???
2. After flash cm7 I flash the gaps???
3. Before install Franco.kernel I should wipe datanand cache again??????
Click to expand...
Click to collapse
1. YES... IT COMPULSORY
2. Yes, if not ur market and google services wont work
3. Just wipe dalvik cache and cache for safety...
Sent from LGE XDA phone
Do a clean wipe on everything ie factory reset/wipe cache/wipe dalvik/wipe everything than flash the ron. In your case cm7 than go to advanced in clockworkmod select reboot recovery than flash gapps then after all is done boot into recovery and flash Franco's kernel. I recommend wiping everything besides factory reset than reboot. Look at sweetnsours signature he uses 6.6.1 with the .35 family tree kernel. Anymore questions just PM me
Sent from my LG-P500 using XDA App
here i am with my signature
Thanks now i am not confuse!!
I am preparing to flash mik's 6.6.1 (CM7.1-RC1) - GB 2.3.5 from Froyo.
Please clarify whether it is necessary/must to format the SD card in Clockworkmod Recovery according with the steps stated in http://forum.xda-developers.com/showthread.php?t=1038338&page=6, i.e.:
Boot into clockwork recovery.
go to backup and restore -create a backup of your current rom (Note:If already backup has been done then avoid this step, backup created using amonra or thunderg wont support restoring using clockwork)
wipe data/factory reset
wipe cache partition
wipe dalvik cache
mount and storage-format system
go to mount and storage-format sd card
advanced-partition sd card-choose 512 mb (preferable)or 1024 mb (it automatically creates ext 4 partition, class 6/4 is preferred)
mount and storage-mount usb storage (make sure usb debugging is enabled)
copy the rom zip file to the root of your sd card
unmount
install zip from sd card-choose the rom zip and install
flashing takes 3-5 min
reboot
Please note that I had already re-arrange my SD-card partition (1GB is assigned for EXT4, and the rest is FAT32) by MiniTool Partition Wizard Home Edition. As far as I understand wipe data/factory reset, wipe cache partition, and wipe dalvik cache have already deleted everything in the phone and SD-card (even whatever stores in FAT32 partition.
Many thanks!!!
Related
I am currently using mik_os 6.5(http://forum.xda-developers.com/showthread.php?t=946354) and Clockwork Mod recovery. I tried to install 6.5.2 on top of it (wiping cache and dalvik cache) but it gets stuck on the lg logo. After going through the first post, I even formatted /system but that didn't help either.
Finally, I flashed 6.5 and it is working fine. Any pointers would be helpful.
1) mounts and storage/ wipe cache
2) mounts and storage/ wipe system
3) wipe cache partition
4) wipe data or factory reset
5) install zip from sd card
And blowww!! You have 6.5.2 flashed ;-)
Sent from my LG-P500 using XDA Premium App
casanovaredefined said:
I am currently using mik_os 6.5(http://forum.xda-developers.com/showthread.php?t=946354) and Clockwork Mod recovery. I tried to install 6.5.2 on top of it (wiping cache and dalvik cache) but it gets stuck on the lg logo. After going through the first post, I even formatted /system but that didn't help either.
Finally, I flashed 6.5 and it is working fine. Any pointers would be helpful.
Click to expand...
Click to collapse
Boot into clockwork recovery.
go to backup and restore -create a backup of your current rom (Note:If already backup has been done then avoid this step, backup created using amonra or thunderg wont support restoring using clockwork)
wipe data/factory reset
wipe cache partition
mount and storage-format system
mount and storage-mount usb storage (make sure usb debugging is enabled)
copy the rom zip file to the root of your sd card
unmount
install zip from sd card-choose the rom zip and install
flashing takes 3-5 min
reboot!
just remeber to backup all ur app using titanium and restore after a fresh install and whnever u update no need to wipe anything just flash over the old version until unless mention by the dev
I didn't want to do a factory reset, however; I still went for it after doing a nandroid backup.
I followed all the steps mentioned by sshbz, but it still got stuck at the boot logo (the one with website address written).
Finally, thanks to the Nandroid backup, I reverted back to 6.5 without having to go through titanium restore.
For 6.5.2, the rom link is given in post 1 and mik_os had also posted a fix for clockword mod users.
I have tried the below
1. Install only the rom
2. Install rom and then the fix
Neither worked. I think I would have to wait for the next update now unless someone can make this work for me.
Whats the best way to do a FULL wipe of the device? including ALL user data/files/rom leftovers/battery stats/binary counter/everything!?
I am talking about as clean a slate as possible.
*2767*3855#
Extra wipe probably overkill .
Connect phone in mass storage mode and format the phone drive .
Boot to recovery wipe cache Advanced wipe dalvik cache .
Mounts and Storage format system data and sd card .
Use Odin to flash stock firmware as phone is empty .
jje
Thanks Guys appreciate it!
Sent from my GT-I9100 using Tapatalk
Flash CWM Recovery. Then select every option called "Wipe xxxxx" in every menu and submenu. Then flash a stock rom.
I have a question by full wipe u mean-
in cwm format system ,data,cache
wipe cache, dalvik cache. Anything else.I dont want to lose sd card contents so i did not do format sd card.Is it ok when installing a new rom?
abhiwltya said:
I have a question by full wipe u mean-
in cwm format system ,data,cache
wipe cache, dalvik cache. Anything else.I dont want to lose sd card contents so i did not do format sd card.Is it ok when installing a new rom?
Click to expand...
Click to collapse
if u wipe with this way u just loss contact and apps that u installed them on your phone but other things like musics,movies and photos .
thanks button
wipe data factory reset and go to mount and storage and format system
To me complete wipe means complete not part wiped .
System Data Cache and internal SD card .
Though no need for wiping SD Card unless data corruption on it .
jje
Wiping by means of formatting won't destroy all of the data, formatting an ext4 partition simply overwrites the file tables. With the right tools it is still possible to retrieve lots of your personal information from a re-formatted partition, including stored passwords, pictures, etc.
tanseerj said:
..including../binary counter..
Click to expand...
Click to collapse
All the named procedures does not, don't they?
So either old bootloader and jig or easier use triangle away.
Erasing user data there is an additional option: settings-device-storage-erase USB-storage.
Full wipe. How??
aydc said:
Flash CWM Recovery. Then select every option called "Wipe xxxxx" in every menu and submenu. Then flash a stock rom.
Click to expand...
Click to collapse
I also do this when the instruction says "full wipe". Aside from this I also format the internal SD(to delete extra folders created from the previous ROM) since all my installers are inside the external SD.
Aside from the above instruction, I also read some posts that you have to mount to a specific folder(not internal/external sd) and clear/format that location. Can anyone confirm this? Thanks in advance.
I do this:
Wipes:
- Factory Reset
- Cache Partition
- Dalvik (Advanced)
Format:
- System
- Data
- Cache
- Internal Storage (No SD)
austick said:
I do this:
Wipes:
- Factory Reset
- Cache Partition
- Dalvik (Advanced)
Format:
- System
- Data
- Cache
- Internal Storage (No SD)
Click to expand...
Click to collapse
Could you care to elaborate on how to do the ones in bold?
What I normally do is that I mount points like /system, /data, /cache, /emmc and format all of them. I'll do all of this using ClockworkMod Recovery.
Sent from my GT-I9100 using Tapatalk 2
I have a plenty of force close problem with almost all of my installed apps, the initial apps from this ROM won't have this problem.
May I know what is the problem? I believe I have correct partition my SD Card and flash the ROM with correct steps...have tried to flash it many many times dy...
Information:
device : bravo(desire) S-OFF
sd card : Sandisk 8GB Class-4
hboot : CM7 r2
recovery : 4EXT Recovery Touch 1.0.0.3 Beta 7
radio : 5.17.05.23
rom : Runnymede AIO 5.0 Special Edition
Partition my SD Card via 4EXT Recovery:
1) tools -> partition sd card -> remove all partitions and start from scratch
2) choose "1024MB" for 1st partition
3) choose "skip" for 2nd partition
4) choose "skip" for swap partition
5) choose "EXT4"
6) check partition aligment
Rom Installation:
Choosen AD2SDX
Wipe:
1) wipe data/factory reset
2) wipe cache
3) wipe cache + dalvik
4) wipe dalvik cache
5) format all partitions (except sdcard)
Can please help help me =.= I like this ROM very much
anyone help help me ?
Try without a2sd. It causes a lot of fc issues
Sent from my phone to your eyes
you mean choose APP2SD instead of AD2SDX?
if use APP2SD,the storage is very low o...
my force close happen after few hours use, have to reboot again when everytime force close...
by the way u using APP2SD type?
No I don't. I don't even own that device. Just giving you some general tips
Sent from my phone to your eyes
I had same problem, but what i did is that,
I used "MiniTool Partition Wizard Home Edition" it is free working on windows. I used it to
1- remove all the partition from my sdcard, then
2- do a partition using 4EXT as a (primary) with 1250MB. and move it the back of the sdcard. (you will know that when you use the MiniTool program).
3- do a partition using Fat32 as a (primary) with the rest of space, you may note extra blank area usually 8MB, that fine just forget about it .
4- upload all the roms you like to the Fat32 part of your sdcard.
5- Wipe:
1) wipe data/factory reset
2) wipe cache
3) wipe cache + dalvik
4) wipe dalvik cache
5) format all partitions (data, system ...etc) (except sdcard).
then install your ROM.
It works with me from the first time and I didn't get any error.
It you get any error after that. take the battery out for few minuses and repeat the wipe step, 2 times for every thing before you install the ROM.
Good Luck and Greeting from Saudi Arabia ..
Hello,
i really tried to find answers around before asking.
I have tryed different roms on my i9100, cm7, cm9, rr, miui. Now i have a tonn of folders from apps that are not even installed on my phone. Now what i want is to get rid of all the trash in my phone, like leftovers from apps i installed with previous roms and make a clean install of cyanogenmod 9.1.
How do i do that?
I would really appreciate any help. Tutorials, links, everything you guys can give to help me out.
Thank you
full wipe, install cm9, erase internal sd card
I normally do the wipes in cwm and format usb storage.
do the following and nothing of the old files will be left.
reboot to recovery
wipe data
wipe cache
mount and storage
format cache
format system
format data
mount cache
mount system
mount data
flash the rom
wait for the installation
Flash a samsung stock rom, keyin the following code using phone keypad *2767*3855# . Is a master factory format code.
Sent from my GT-I9100 using xda premium
Do this step by step :
1. to format internal and external mmc, connect your phone in mass storage mode and format each drive with windows format tool (right click on drive icon -> format)
2. to format flash memory go to recovery wipe data, wipe cache, wipe dalviq cache
3. Install rom
Cosmic Blue said:
do the following and nothing of the old files will be left.
reboot to recovery
wipe data
wipe cache
mount and storage
format cache
format system
format data
mount cache
mount system
mount data
flash the rom
wait for the installation
Click to expand...
Click to collapse
Thank yo very much! I didn't notice those formats in recovery before. That solved my problem.
/thread
I was installing jellybean cm 10 on my atrix and here's what I did
I rooted the device
unlocked the boot loader
power and volume down
I stopped at android recovery
I went to mounts and storage
format system
format cache
format data
format preinstall
wipe cache partition
wipe dalvik
wipe data factory reset
and I install the cm10 zip from the sd card
then download google apps
then rebooted.
Once it rebooted I'm stuck.. and I really have no clue what to do.
cbmortel said:
I was installing jellybean cm 10 on my atrix and here's what I did
I rooted the device
unlocked the boot loader
power and volume down
I stopped at android recovery
I went to mounts and storage
format system
format cache
format data
format preinstall
wipe cache partition
wipe dalvik
wipe data factory reset
and I install the cm10 zip from the sd card
then download google apps
then rebooted.
Once it rebooted I'm stuck.. and I really have no clue what to do.
Click to expand...
Click to collapse
Download ROM
Download Gapps for version of CM
Reboot recovery
Wipe system, data, cache, vendor/webtop, dalvik cache
Flash ROM
Flash Gapps
Reboot to ROM
1st boot in new ROM will take longer than normal
Sent from my MB886 using xda app-developers app