My Thunderbolt will not stay in disk drive mode. I plug it in to my pc via usb, switch to Disk Drive mode, NOT EVEN A MINUTE LATER it's in Charge Only.
W T F
Could be a bad cable, a bad port on your PC, or a bad port on your phone.
Did you try a different cable or port on the computer?
Related
When I plug my gtab into my pc, it isn't recognized. On the tablet I get a message"usb debugging connected,but nothing about the usb port being connected. I was able to connect before. The only time it recognizes the usb is when I insert a microusb card and restart the unit. I am currently using bittrix-gb-beta-cm7. Everything else is working.
Hi i bough a vibrant SGH-T959
I am triying to root it but it wont conect to my pc
the guy i bought it from told me the phone was rooted before but he restord it before he sold it to me. eany ways i have try all the USB ports in my pc
and have try 2 diferent pc too, tried diferent cablesn and i have install the drivers in all of the other computers. i put it on debuging mode and the computer simply doesent recognise it. i tryUSBDeview and i dont see samsung drivers eanywhere but i know i have them install in fact i have re enstalled them and nothing
the phone charges but dosesent get detected by the computer
eany help will be apreciated thanks
Download Samsung kies. It will install Samsung drivers for you.
Link: http://www.samsung.com/us/kies/
Sent from my SGH-T959 (Samsung Vibrant)
I have tried that and nothing :/
Try turning USB debugging off and try again...
By the way, you're on stock 2.1 correct?
Sent from my SGH-T959 (Samsung Vibrant)
i have try that and nothing
i have try easytether driver
the msi program and all sort of things
and im in 2.2
So USB debugging won't work. Kies/Sammy drivers won't work. I have a radical idea. Maybe your computer won't recognize the drive as a Mass Storage device b/c the drive letter got deleted somehow. This has happened to me on a few phones when flashing-fantastic.
Try this and see. It is for XP but I suspect there are similar solutions if you are on W7.
ill chek it out but i have try my phone in 3 direrent computers and nothing :/
the strange thing is when i plug it in to the PC it only charges
but when i plug it in to de AC adater it goes into debuging mode 0.o
Now i turned debuging off and turned mass storage on
and when i plug it to charge it says USB connected phone conected to computer 0.o
Try these steps:
1. Disconnect your phone from your PC
2. Setting
3. Wireless & Network
4. USB
5. Click the last option (don't remember)
6. Reconnect your phone again
Good luck
orphan22 said:
Now i turned debuging off and turned mass storage on
and when i plug it to charge it says USB connected phone conected to computer 0.o
Click to expand...
Click to collapse
Hello. I have a problem. When i connect my SGSII to my pc it connects and disconect, and it repeats every second. I cant use usb mode. Charger works good, it charges ok via charger and usb. but problem is i cant connect my phone to pc. I tried to make factory reset,tryed on another pc and other usb cable but it doesnt helps. Please guys i need help.
My problem looks like this: http://www.youtube.com/watch?v=WEqL32bVEpQ
which udb mode is the phone in media or mass storage ?
try deleting and reinstalling the usb drivers.
me
i tried both usb modes and reinstall usb drivers, still doesnt help!
I'm having an issue with my Samsung Galaxy S2 GT-I9100 (running on stock Jellybean 4.1.2) no longer connecting to the PC via USB. It had been working fine up until a few days ago.
When I connect the USB cable, it only charges the phone. It doesn't show that it is connected in MTP mode and no USB options appear in the pull down notification bar. I tried locating the phone on the computer in Windows Explorer and the Device Manager, but it wasn't there at all. There also wasn't any unrecognised device in the Device Manager.
I’ve tried the following:
Using different USB cables. Tried two official Samsung cables, a Belkin charge/sync cable and a generic cable
Plugging into different USB ports on 3 different PCs/notebooks (running on Windows 7/8)
Turning on/off USB debugging mode on the phone
Going into Settings>Wireless and networks>USB utilities. After tapping "Connect storage to USB", it will prompt to connect a USB cable even though it is already plugged in.
Booting the phone in safe mode and connecting the USB cable
Installing the latest version of KIES. I had never used the software before but gave it a try. KIES wouldn't detect the phone
Uninstalling and reinstalling the latest Samsung drivers
Dialling *#7284# for the PhoneUtil options and checking it was PDA mode under the USB option.
Turning off the phone, removing then re-inserting the SIM card and battery
Cleaning the micro USB port on the phone
I have not made any changes to the phone (or PCs), so I'm not sure what has happened for the USB connection to stop working.
Your assistance would be much appreciated.
That is very weird. Are sure you didn't change the USB connection type?
danielbe said:
That is very weird. Are sure you didn't change the USB connection type?
Click to expand...
Click to collapse
Definitely sure.
I'm wondering if maybe the micro usb port is damaged, even though there's no problems charging the phone.
That is very possible, the port can be damaged in a way that only allows charging.
Hey guys, My micro-usb was damaged so i changed it with a new one... It didn't work and phone was charging instead of Mass Storage or Debugging mode !
I thought its fake and a bad quality micro-usb so i changed it again and still have the same problem.
I have the same computer, same cable and everything is same, even the programs which i installed in both phone and pc are same, but it wont connect to pc.
My moms phone can be connected with my cable.
Ok, before i change the Micro-Usb, it was fine but not charging as good as normal. I mean at least i was able to upgrade or downgrade my android version )
Can anyone help me ? I already did a factory reset and removed the SD card. No lucks ... ( i also tried other cables and other computers, but the problem is ONLY with my damn phone )
I'm running Android 4.0.3 KH3
I have Samsung Galaxy S2 on stock 4.1.2 ROM and have bought a USB OTG cable. I connect my USB flash drive onto USB OTG cable then connected the cable to my phone and it shows a message USB mass storage is connected. When I open My Files app, I cannot find any way to access my USB. Am I doing something wrong?
Edit: Solved, tried another USB and it worked.