hello guys,
have got SE xperia x10 from US,
have unlocked the same from AT&T to make it generic.
currently running on android 2.1
Firmware version
2.1 update 1
Baseband version
2.1.54
Kernel version
2.6.29
Build Number
2.1.A.0.435
I want to install xrecovery on my X10i, which i am unable uptill now.
My x1o is rooted somedays ago thru superoneclick.
can anyone suggest me the exact firmware to flash in my phone as i have unlocked my phone which was previously x10a US AT&T... and now its x10i generic.
Thanks.
You can install: http://www.multiupload.com/SR8R1B5KII
Using: http://forum.xda-developers.com/showthread.php?t=920746
That's x10a AM-US GB 1233-822
US generic Gingerbread for x10a.
You can then root using: http://forum.xda-developers.com/showthread.php?t=1196421
And install xrecovery right after you're done and booted up.(You have to choose ask root perms on flashtool first before you can)
The option should be enabled on flashtool when you boot up.
Thanks Dark Nightmare,
done!!!.... kudos to the flash tool owners...
had a small prob after i had flashed the fw...
the phone wasnt detecting the memory card even if i had formated the same on the PC...
tried my memory card on other smart fone, and it worked perfectly fine...
solution: format in a nokia fone and u r done.... everything works perfectly after that....
Related
I am currently using NTT Docmo Xperia x10 on android 1.6. Its model is SO-01b and i want to upgarde to android 2.1 and unlock the phone as well. But i am not clear which version to use , nordic or global. I am not sure but on according to wikipedia nTT docomo so-01b is based on x10a.
Please someone help me if anyone could give me suggestion.
My Docomo X10 is flashed to global generic 2.1 and running just fine.
Just don't forget to write down your APNs so you can put them back.
You want the "bizho" one, since that's the network where your internet fees are capped.
Thanks for the response gtkashi.I am now in Nepal and want to make the phone work here in Nepal by upgrading to android 2.1. Could u please clarify me whether flashing would make the phone sim free.
it won't. You're just updating the software, not unlocking the phone.
Get in contact with nttdocomo to see what their policies/costs for unlocking your phone are or try to see whether there's some shady services for unlock codes by now.
Global to Docomo firmware 2.1
With this upcoming update for Docomo, if you currently have global 2.1, how would we "instruct" SEUS to flash the Docomo firmware? Would we need to edit some *.prop ?
Personally I'm hoping someone would extract the firmware itself so that the flasher tool can be used to overwrite the existing one.
Either way, 30 min til Nov 10!
SE so-01B Gingerbread
Downlaod flashtool in flashtool.net
downlaod 2.3.3 ROM at http://www.mediafire.com/?jdf3988lv6wbe47
place it to firmware folder and flash it
Your SE SO-01B will be with GINGER BREAD enjoy
X10 ntt so-01b
senthilpgv said:
Downlaod flashtool in flashtool.net
downlaod 2.3.3 ROM at http://www.mediafire.com/?jdf3988lv6wbe47
place it to firmware folder and flash it
Your SE SO-01B will be with GINGER BREAD enjoy
Click to expand...
Click to collapse
Good am sir,i know this is a common question but i just know if i flash my x10 to file that you.then it openline now.its posible that after flashing i need to openline it again?
so sad the google playstore no more works in this model now as google has stopped its support.. what should be the option now? anybody can help. it doesnt have any file manager installed too
Not sure if this is where i should post this but i was trying to return my x10 mini pro to its normal state, which the past 2 days would leave me with 2.0.A.0.504 as its build version and the baseband was M76XX-TSNCJOLYM-53404006
Only just as of roughly 35 minutes ago, i had used the same program SEUS from sony ericsson to repair my x10 mini pro. I restarted my phone and checked its settings to find that my model was still U20a with the same firmware version but with a new baseband version number and the new 2.1.1.A.0.6 build version...
Your best bet is to use the flashtool.
http://forum.xda-developers.com/showthread.php?t=928343
Why do you want to use 2.0.A.0.504 vs. 2.1.1.A.0.6? The latest firmware is 2.1.1.A.0.6.
leftAlone said:
Your best bet is to use the flashtool.
http://forum.xda-developers.com/showthread.php?t=928343
Why do you want to use 2.0.A.0.504 vs. 2.1.1.A.0.6? The latest firmware is 2.1.1.A.0.6.
Click to expand...
Click to collapse
No I am just showing people that in Australia if you are on Telstra and have an x10 mini pro that they have released that update now...
We were stuck with 2.0.A.0.504 for months...
i flashed the E15_nAa-11_2.6.29.6-nAa-11.ftf on my xperia x8 so that i could install update-cm-9.0.0-V02-X8-KANG rom. Now i want to revert back to original se rom but there is conflict with the base bands meaning i have to use X8i_2.1.1.A.0.6_Baseband_015 to be able to install but this base band usually doesn have xrecovery so one has to install xrecovery but my current system doesn allow xrecovery to install. am stuck any help?
aulterra said:
No I am just showing people that in Australia if you are on Telstra and have an x10 mini pro that they have released that update now...
We were stuck with 2.0.A.0.504 for months...
Click to expand...
Click to collapse
I hope you've seen this already : http://forum.xda-developers.com/showthread.php?t=1125587
viutalic said:
i flashed the E15_nAa-11_2.6.29.6-nAa-11.ftf on my xperia x8 so that i could install update-cm-9.0.0-V02-X8-KANG rom. Now i want to revert back to original se rom but there is conflict with the base bands meaning i have to use X8i_2.1.1.A.0.6_Baseband_015 to be able to install but this base band usually doesn have xrecovery so one has to install xrecovery but my current system doesn allow xrecovery to install. am stuck any help?
Click to expand...
Click to collapse
Root your device first! Otherwise it is impossible!
i was trying to installe android 2.3.5 but i found its post the i cant unless i have
Only 2.1.1.A.0.6 or 2.1.1.C.0.0 SE firmware is that the orignal Rom the device came with ?
If you go into 'settings' then 'about phone' you will see the phones baseband version. If it ends in 15 it is most likely one of the two firmwares you mention. If you try to install a rom dependant on these firmwares and you don't have it you will temporarily brick your phone. (Requiring the use of the Sony Ericcson Update Service to hopefully restore the phone to working order).
It is possible your phone has the firmware already installed but you need to check! Some network providers have been very slow at releasing them. If you manage to find the firmware on the web (make sure it is the correct language and layout for your locale - AND the correct phone) then you need to use a flashing utility to install it, I use 'flashtool' as it can root the phone and install xrecovery, but you must be sure you read the documentation and follow the proceedure.
Once you have xrecovery and the phone is rooted the magic can begin..
Be careful. Its very easy to render your phone bricked (as in the phone is as useful as a brick!). No one here can take responsibility for the advice given or your actions.
Sent from my U20i using Tapatalk
my phone android version 2.2.1
baseband version M76XX-TSNCJOLYM-53404015
KERNAL VERSION 2.6.29 [email protected]#1
MOD VERSION FROYO MINICM/CMV6 HYBRID BY SLADE87 AND OWAIN 94
BUILD NUMBER V5.01 FINAL RELEASE
SO CAN I INSTALL SONYBREAD WHICH requires 2.1.1.A.0.6 or 2.1.1.C.0.0 SE firmware
so do i have it????
Not anymore, but if you do Factory reset, yes you have
no it will not cuz the factory ROM is not exsist
In my understanding the firmware doesn't change when you install a custom rom and (to me) they are two different entities. So yes, in my view you should be able to flash sonybread but I haven't used it myself but I have other gingerbread ports without a problem
Once your on the correct baseband you can change between roms without having to flash via the pc/flashtool.
If you get into bootloops then you can try restoring an xrecovery/cwm recovery or failing that reflashing with seus/flashtool.
Sent from my U20i using Tapatalk
Hi guys,
I am on rogers here in Canada, and we did not recieve the 2.3 update for my branded x10i.
I wanted to manually update to 2.3, and was wondering if I can do that.
Can i just download the Generic version 2.3.3 build 3.0.1.G.0.75 from:
http://forum.xda-developers.com/showthread.php?t=920746
(which says its meant for unbranded x10i's) and use it on my branded x10i from rogers and follow the instructions to root and install? Would it work? Or what are the procedures?
I ultimately want stock 2.3 rooted for my phone.
Thanks!
of course it works
just put the downloaded .ftf file in the firmware folder of your extracted flashtool
then flash it
done
It works flawlessly dude. I made that with my X10a Rogers about 20 days ago
Hi guys,
I have a Xperia Mini Pro with this configuration...
Model: U20i
Firmware: 2.1-update1
Baseband: M76XX-TSNCJOLYM-53404006
kernel: 2.6.29
I'm still a noob at installing new versions of Android.
Can anyone tell me how i update the Baseband to M76XX-TSNCJOLYM-53404015?
I already have it rooted, i just can't install modified androids because of this baseband!
Thanks! Any help is welcome!
You need to update the phone using the SEUS app. This will upgrade your baseband but will also wipe any existing mods & data.
Simply Run the SEUS program and follow the intructions given on screen. Once you've updated, your baseband will be updated.
--
Not sure why your baseband isn't already, having re-read the post you say it already has 2.1 update-1 which is wierd. Try updating the phone again anyway it might solve your problem
You can update with pc companion
Sent from my U20i using XDA App
Try updating via PC Companion or SEUS, like that:
http://www.youtube.com/watch?v=zS2LIuy6YfY
I have some probleam. My xperia x10 mini dont upgrade firmware, because it is modify by TIM. So, i have a old firmware and baseband. How i can upgrade firmware? I cant do it in SEUS because say that i have the last firmware, but dont. How can i do? Flash new firmware? If i flash i can return to the original if i have some probleam whit new firmware? Where i can found the last firmware for x10a? Tks anyway!
Yusuke17 said:
Hi guys,
I have a Xperia Mini Pro with this configuration...
Model: U20i
Firmware: 2.1-update1
Baseband: M76XX-TSNCJOLYM-53404006
kernel: 2.6.29
I'm still a noob at installing new versions of Android.
Can anyone tell me how i update the Baseband to M76XX-TSNCJOLYM-53404015?
I already have it rooted, i just can't install modified androids because of this baseband!
Thanks! Any help is welcome!
Click to expand...
Click to collapse
You need to change your build.prop file to fool SE that you have a different version so they'll send you the 015 version. To do this you must:
1. Root the phone.
2. Google and download a build.prop file for your phone (exact model).
3. Change your current /system/build.prop with that one using RootExplorer (or similar).
4. Reboot the phone.
5. Update the phone with PC Companion.