First time I'm posting so hey.
I just bought a HTC Hero today and decided to load a custom ROM onto it.
I flashed it fine, and installed modaco earlier (file name: 2.8-update-hero-modacocustomrom-core-signed).
So when I powered it back on, it looked like it worked fine, but I must of went wrong somewhere.
The phone will boot up, stay on for like 5 seconds, and then restart. When it comes on, I can't do anything cause it freezes on the lock screen then just restarts.
I'm pretty sure I messed up by putting that ROM on a t-mobile UK Hero(which I unlocked). I aint sure as I'm only new to this.
Any advice on how to fix this?
did you do a phone wipe before installing the custom rom?
I formatted the SD card.... I think before I flashed it.
Then just put the ROM on the root of the SD card.
See it looked like it done everything fine with the ROM.
I held in the home/power buttons, loaded the boot menu.
I did a "Ndroid back up" (did I spell that right) - so I could restore in case something like this happened (which I did, since I need my phone lol), then picked "SD Choose", picked the modaco ROM and it seemed to install fine. Took a few minutes. Install complete. I rebooted the phone.
Then it loaded the normal boot screen, and would literally last only 1 second and freeze on the lock screen saying no signal, then it would reboot. And loop this pattern.
Neo-Dragon said:
I formatted the SD card.... I think before I flashed it.
Click to expand...
Click to collapse
A wipe has nothing to do with the SD card. It is essentially resetting your phones internal memory back to "factory" defaults. I take it you have a custom recovery image, as you mentioned making a Nandroid backup - you will find an option to wipe there.
Regards,
Dave
So if I wipe the phone before hand and then upgrade it should be fine?
If I do a nandroid back up, will I still be able to roll my phone back if it fails?
A wipe now may fix your problems with you needing to upgrade again.
My suggestion would be trying this first - if it doesn't help, restore your nandroid backup, wipe, and apply the new ROM again.
Regards,
Dave
Cheers mate.
After the wipe, I re-installed the ROM and it works perfect.
Thanks again.
So i got this lovely update from Verizon. I rooted using the one touch but never made any changes to the phone. Still using default UI etc. Just rooted to access saves, overclocking.
So the update reboots the phone, starts installing, and fails. Then i can go to the menu and reboot the phone. It will come all the way on, and immediately just shuts down and tried the update again. Stuck in this vicious cycle. Help?
Mount the SD card either in recovery or on a PC and see if there is a PG05IMG.zip on it. Remove it if so, then reboot.
tqhx said:
So i got this lovely update from Verizon. I rooted using the one touch but never made any changes to the phone. Still using default UI etc. Just rooted to access saves, overclocking.
So the update reboots the phone, starts installing, and fails. Then i can go to the menu and reboot the phone. It will come all the way on, and immediately just shuts down and tried the update again. Stuck in this vicious cycle. Help?
Click to expand...
Click to collapse
You can't install an OTA if your rooted, even if you haven't made any changes. The problem is the custom recovery (e.g. ClockworkMod)
When the update tries to install the updated recovery, it sees that the old stock recovery isn't there, and fails.
As far as recovering from that, I'm not entirely sure.
Seeing as you used the one touch root, I doubt you installed the S-Off eng bootloader. Try what the above poster suggested first.
Thanks for the replies guys. I did have s-off, but yeah ill tell you i tried what he suggested with no luck.
I ended up being ok i made another clockwork backup, did a full restore from a backup before the date of the update, then did just a data restore from the backup i had just made. Phone is back to normal. Thanks for the responses, ill give you both marks for being helpful
I'm in the same boat, except I was silly enough to not have a backup made. I do not see the PG05IMG.zip from recovery. Any other possible ways to fix this? If I have to clear all my data and start again, I'm ok with that though I'd obviously prefer not to do that.
Boot into clockwork recovery and wipe cache only.
Sent from my HTC Thunderbolt
This same issue has happened to me with the Verizon update. Long story on how it i clicked okay to the update. I told it reject at least 3 times already.
Anyway - i was stuck in this nasty reboot cycle. I was lucky to have a backup from March when I first rooted my TB. Not having a more recent backup is my bad.
So I have worked most of today with near factory settings from my recovered backup and now I am restoring todays backup to see if I can fix this reboot BS.
I did the Wipe Cache from ClockMod and when the phone rebooted it gave the prompt to reinstall the update which I cancelled. So success!!! Now I can clean up my junk apps and do a proper backup to protect myself in the future.
I installed avast mobile security and set everything up as a root user. I'm on the stock ROM and as soon as I was done setting everything up I rebooted and now Im' stuck in a boot loop. It does not boot loop every time... sometimes it boots up and after about a minute it reboots itself, then bootloops.
I removed avast as an administrator / rebooted / then did a clear data and uninstall. Same thing happens so I booted into amon and did a clear cache and dalvik cache.
I've also booted into Amon and wiped all caches. Still no go and I notice that I'm not getting any signal bars (yes, I remembered to put the cover back on). Any help would be greatly appreciated...
Try this.. http://forum.xda-developers.com/showthread.php?t=1394659
sent from ics land
edit: try what the person above me posted first.
Are you on the stock kernel too? I would recommend doing a full nandroid backup and an internal SD card backup and RUU from scratch if you can't get the loops to stop.
I ran avast! for a while with no issues. Could be the link above is what you need.
Thank you all, trying option #1 now. I do have a Nandroid backup I did after I first rooted, and I am on the the stock Kernel.
Holy Cow, it was set to WCDMA Preferred! I'm really surprised that avast changed that setting. I put it back to the correct setting and now my signal is back. I'm rebooting now to see if it sticks.
Thank you all a ton! I'll post back in a few and let you know if that did the trick *fingers crossed*....
Update: Been about 15 minutes and no bootloop or auto reboot so the fix seemed to have worked. Once again, thanks a ton you guys for the help, I appreciate it.
I doubt it was avast that did it. It seems to happen randomly to certain people.
So I have had Cyangenmod 10 installed for several months now and it's been working fine until I would say the last 2 weeks. Now, sometimes it will lock up or slow down and when I restart it, it will get stuck on the cyangenmod logo and never fully boot. After several restarts, I can sometimes get in and all is fine. But today, I have rebooted the Nook Tablet about 10 times now and the Cyangenmod logo will spin for a bit, then stop and then spin and then stop, etc but I can never get in
Ideally, I don't want to restore as I have a number of things on the Tablet that I want to keep. Any suggestions before going that route?
Try going into recovery and wiping cache and dalvik-cache, and then reboot. When oddball things happen, this should be your first trouble shooting step.
Good luck
Sent with my Dinc4G
tried the wipes and still gets stuck on the cyangenmod logo..just spins and stops for a bit, then spins some more
any other ideas
Titanium backup the apps/data you want to keep then full wipe - data/factory reset.
Sent with my Dinc4G
can't do titanium backup if I cant even get passed the cyangenmod logo
Ya good point.
You may have to reflash the rom (or another rom) after a full wipe. I know you are trying to avoid this, but you may not have a choice. You should, however be able to restore your data through advance restore in recovery (make sure you do a backup first though). And it is possible something you put on your nt is causing this - not likely but possible.
Had you done any mods or such on you nt prior to this?
Edit - Another thought too, try flashing the latest update of cm10.1, Just wipe cache and dalvik cache. Flash over the top your current build.
Good luck
Sent with my Dinc4G
Hey All,
I've upgraded my 925F to Official MM 6.0.1. Rooted it through kernel Xspace and then installed recovery TWRP_3.0_MM_S6_by_ManhIT
My only concern is when I'm in TWRP I can't reboot, it just freezes.
I can nandroid backup no problem just the reboot part freezes TWRP.
Anyone else had this problem? is there another TWRP to be used?
nb : I tried clearing cache + dalvik, freezes still happen before rebooting.
thanks for ur help.
kaemon said:
Hey All,
I've upgraded my 925F to Official MM 6.0.1. Rooted it through kernel Xspace and then installed recovery TWRP_3.0_MM_S6_by_ManhIT
My only concern is when I'm in TWRP I can't reboot, it just freezes.
I can nandroid backup no problem just the reboot part freezes TWRP.
Anyone else had this problem? is there another TWRP to be used?
nb : I tried clearing cache + dalvik, freezes still happen before rebooting.
thanks for ur help.
Click to expand...
Click to collapse
Try this TWRP form arter... this is the only TWRP being use by many of us here.. you flash it through odin or recovery...
I had the same problem and i solved changing my kernel
Inviato dal mio SM-G925F utilizzando Tapatalk
fabiok81 said:
I had the same problem and i solved changing my kernel
Inviato dal mio SM-G925F utilizzando Tapatalk
Click to expand...
Click to collapse
The issue is not the kernel... its the recovery that doesn't work when reboot to system is touch and is freezing..
Go to advance then terminal
Write reboot
Easy!
Yes i know the iusse is about the recovery but it seems because there is not compatibility between some recovery and some kernel. I tried various recovery 3.0 and i have always a kind of freeze. The TWRP... by Manhit for example gave me freeze with xspace kernel but not with hacker kernel. I don't no the reason....
Inviato dal mio SM-G925F utilizzando Tapatalk
same but different
Hi All,
I'm experiencing a freeze in TWRP after about a few seconds, the whole recovery stands still and this happens every time.
I flashed the Xspace kernel which hasn't help.
The TWRP from arter97 works great, except it doesn't allow me to copy files to my PC using MTP, message says unexpected error.
yet, the ManhIT and Original TWRP allow me to copy data but both of them freeze up after a few seconds which causing the copying to fail.
Reasons I'm doing this is because my SM-G925F start looping and I've tried flashing stock so many times to no avail.
I'm sure all i need to do is data/ factory wipe and my phone will boot fine, I just really need some data before I do that.
Is there perhaps a different kernel I can try?
or if anyone has any suggestions that would be very much appreciated.
Regards
wahwahward said:
Hi All,
I'm experiencing a freeze in TWRP after about a few seconds, the whole recovery stands still and this happens every time.
I flashed the Xspace kernel which hasn't help.
The TWRP from arter97 works great, except it doesn't allow me to copy files to my PC using MTP, message says unexpected error.
yet, the ManhIT and Original TWRP allow me to copy data but both of them freeze up after a few seconds which causing the copying to fail.
Reasons I'm doing this is because my SM-G925F start looping and I've tried flashing stock so many times to no avail.
I'm sure all i need to do is data/ factory wipe and my phone will boot fine, I just really need some data before I do that.
Is there perhaps a different kernel I can try?
or if anyone has any suggestions that would be very much appreciated.
Regards
Click to expand...
Click to collapse
Try with hacker kernel. Wipe cache but not data
callumbr1 said:
Try with hacker kernel. Wipe cache but not data
Click to expand...
Click to collapse
Thanks for your response callumbr1.
I've attempted two different kernels:
g925-hacker-echoe-kernel-V14.zip
hacker-kernel-S6-Universal-V12.zip
Above mentioned problems persist.
Since arter97 TWRP is not freezing on me, if I run a back up on the Data only. Then perform the wipe, the backup should still be there, correct?
and lets say I flash the stock ROM again if necessary and I'm able to boot the device.
Would it be possible to restore that data back up at all ?
or perhaps copy that back up to my PC and access/extract the files with a separate application?
Many Thanks
wahwahward said:
Thanks for your response callumbr1.
I've attempted two different kernels:
g925-hacker-echoe-kernel-V14.zip
hacker-kernel-S6-Universal-V12.zip
Above mentioned problems persist.
Since arter97 TWRP is not freezing on me, if I run a back up on the Data only. Then perform the wipe, the backup should still be there, correct?
and lets say I flash the stock ROM again if necessary and I'm able to boot the device.
Would it be possible to restore that data back up at all ?
or perhaps copy that back up to my PC and access/extract the files with a separate application?
Many Thanks
Click to expand...
Click to collapse
I think best thing to do is get an otg storage adapter that plugs direct to phone. They are cheap.
Then run the backup of data and store on otg storage. Then you have it safe and it can be restored at a later time with restore option in twrp.
Or you can always do a full nandroid backup.
Can you get onto the phone now? Does it boot up?
Is there anything specific you need off the phone? To be backed up?
callumbr1 said:
I think best thing to do is get an otg storage adapter that plugs direct to phone. They are cheap.
Then run the backup of data and store on otg storage. Then you have it safe and it can be restored at a later time with restore option in twrp.
Or you can always do a full nandroid backup.
Can you get onto the phone now? Does it boot up?
Is there anything specific you need off the phone? To be backed up?
Click to expand...
Click to collapse
I plan on getting one of those, they seem extremely useful. A colleague has one which I plan to use tomorrow if they remember to bring it, I will then do as you suggest.
Never done a full nandroid back up before but will do some searching on that.
Phone still hangs at the Samsung splash screen.
And its really only pictures and some videos that I want, contacts would be nice too.
PS, this happened when I plugged my device into the PC to charge it was at about 5%, and I was making use of side sync to control the device when it just shutdown. I thought maybe the battery died so left it to charge a bit, it eventually tried to boot up by itself and its been looping ever since. Was really strange cause it gave me no issues prior to this. When I tried to get to the recovery it would hang at the "installing updates" section once I flashed the stock ROM I was able to get to recovery to wipe the cache but no luck.
Thanks for your suggestions much appreciated.
wahwahward said:
I plan on getting one of those, they seem extremely useful. A colleague has one which I plan to use tomorrow if they remember to bring it, I will then do as you suggest.
Never done a full nandroid back up before but will do some searching on that.
Phone still hangs at the Samsung splash screen.
And its really only pictures and some videos that I want, contacts would be nice too.
PS, this happened when I plugged my device into the PC to charge it was at about 5%, and I was making use of side sync to control the device when it just shutdown. I thought maybe the battery died so left it to charge a bit, it eventually tried to boot up by itself and its been looping ever since. Was really strange cause it gave me no issues prior to this. When I tried to get to the recovery it would hang at the "installing updates" section once I flashed the stock ROM I was able to get to recovery to wipe the cache but no luck.
Thanks for your suggestions much appreciated.
Click to expand...
Click to collapse
They are really useful, one of the best things ive ever bought regarding my phone. I use it daily now.
As for nandroid backup, it basically backs up absolutely everything including the firmware and data and all partitions. I always do it before flashing or modifying anything. Then if anything goes wrong, you just flash back your nandroid backup.
Can i ask before this happened did you use google photos? If so and sync was on they will all be saved. If you dont use it i reccomend you to use it from now on incase this ever happens in future.
See how you go making the backup when you can then if you need help regarding flashing the stock and getting the phone working ill help
callumbr1 said:
They are really useful, one of the best things ive ever bought regarding my phone. I use it daily now.
As for nandroid backup, it basically backs up absolutely everything including the firmware and data and all partitions. I always do it before flashing or modifying anything. Then if anything goes wrong, you just flash back your nandroid backup.
Can i ask before this happened did you use google photos? If so and sync was on they will all be saved. If you dont use it i reccomend you to use it from now on incase this ever happens in future.
See how you go making the backup when you can then if you need help regarding flashing the stock and getting the phone working ill help
Click to expand...
Click to collapse
Good day callumbr1
I never made use of google photos, not the biggest fan of cloud storage to be completely honest but I do see its benefits when it comes to times like these. lol
as for the device, last night I flashed a custom recovery (arter97) and made use of the SkipSoft Android ToolKit to pull my photos, videos and documents through the adb protocol. That being said, I have the data I wanted so all is well there.
However, after wiping the cache and doing a data / factory reset. I reflashed the stock ROM, it all goes swell until the android pops up with a message displaying " installing system updates". It gets to 32% changes to erasing then restarts , and this happens constantly no matter how many times I flash it or restart the device.
I read on another forum that my devices is probably dead and it could be the mother board. Any thoughts?
You think maybe a custom ROM would bring it up?
wahwahward said:
Good day callumbr1
I never made use of google photos, not the biggest fan of cloud storage to be completely honest but I do see its benefits when it comes to times like these. lol
as for the device, last night I flashed a custom recovery (arter97) and made use of the SkipSoft Android ToolKit to pull my photos, videos and documents through the adb protocol. That being said, I have the data I wanted so all is well there.
However, after wiping the cache and doing a data / factory reset. I reflashed the stock ROM, it all goes swell until the android pops up with a message displaying " installing system updates". It gets to 32% changes to erasing then restarts , and this happens constantly no matter how many times I flash it or restart the device.
I read on another forum that my devices is probably dead and it could be the mother board. Any thoughts?
You think maybe a custom ROM would bring it up?
Click to expand...
Click to collapse
Thats good about your data :good:
As for the little android guy and the installing updates then erasing, this normally happens. It happens every single time i restore and normally boots fine just after its not normally an issue. After yours says erasing does it then just reboot and restart the process of erasing constantly?
What i would suggest first is to flash a different stock ROM, preferably one with newest bootloader.
After flashing, boot to recovery and wipe dalvik cache. If it gets as far as the samsung logo just leave it as the first boot can take a while... like 30 minutes.
If that doesnt work try to flash a custom ROM. I reccomend CarHD ROM. I uave used it for quite some time and no issues.
It deffinately does not sound like motherboard issue. Normally you would have many issues and errors on boot prior to having main board issues.
See how you get on and keep me updated.
callumbr1 said:
Thats good about your data :good:
As for the little android guy and the installing updates then erasing, this normally happens. It happens every single time i restore and normally boots fine just after its not normally an issue. After yours says erasing does it then just reboot and restart the process of erasing constantly?
What i would suggest first is to flash a different stock ROM, preferably one with newest bootloader.
After flashing, boot to recovery and wipe dalvik cache. If it gets as far as the samsung logo just leave it as the first boot can take a while... like 30 minutes.
If that doesnt work try to flash a custom ROM. I reccomend CarHD ROM. I uave used it for quite some time and no issues.
It deffinately does not sound like motherboard issue. Normally you would have many issues and errors on boot prior to having main board issues.
See how you get on and keep me updated.
Click to expand...
Click to collapse
It doesn't say erasing after the first time. Right after the flash it will reboot to the blue screen with the android, it displays Installing update with a percentage bar which gets to 32% then that disappears and shows erasing, then again it shows installing update with no percentage bar. The android guy has a two arrows on his chest spinning which eventually stops. The device then reboots. It goes back to the Android guy but this time it shows "installing system update" without the percentage bar, it will then freeze again then reboot. That will continue forever until the battery dies.
After flashing though I can't seem to get to recovery to wipe the cache, I hit the buttons as I always do, but the blue screen and android always appears.
This is the stock ROM I'm currently using:
https://www.sammobile.com/firmwares/download/105085/G925FXXU4DPJB_G925FXFV4DPJ2_XFV/
Do you perhaps have a link to that custom ROM? would it work fine with the service provider here in SA (Vodacom) ?
And well at least that is some good news, I'm not too keen on having to take this into a shop and pay for parts.
wahwahward said:
It doesn't say erasing after the first time. Right after the flash it will reboot to the blue screen with the android, it displays Installing update with a percentage bar which gets to 32% then that disappears and shows erasing, then again it shows installing update with no percentage bar. The android guy has a two arrows on his chest spinning which eventually stops. The device then reboots. It goes back to the Android guy but this time it shows "installing system update" without the percentage bar, it will then freeze again then reboot. That will continue forever until the battery dies.
After flashing though I can't seem to get to recovery to wipe the cache, I hit the buttons as I always do, but the blue screen and android always appears.
This is the stock ROM I'm currently using:
https://www.sammobile.com/firmwares/download/105085/G925FXXU4DPJB_G925FXFV4DPJ2_XFV/
Do you perhaps have a link to that custom ROM? would it work fine with the service provider here in SA (Vodacom) ?
And well at least that is some good news, I'm not too keen on having to take this into a shop and pay for parts.
Click to expand...
Click to collapse
Thats pretty much exactly what happens to mine after restoring or flashing but mine boots up.
Flash the firmware again but in odin options uncheck auto reboot. This time after flashing, the phone should stay off. Then you can boot to recovery.
If that doesnt work, whilst it is on the blue screen with android guy hold only vol down and power, phone will reboot, as soon as the screen goes off switch to recovery combo and this should force it to recovery.
https://forum.xda-developers.com/galaxy-s6-edge/development/rom-carhdrom-1-t3111519/page1427
Here is the link to custom ROM, it will work fine on your phone. You need to flash this through TWRP. If you need steps on how to do this please tell me.
callumbr1 said:
Thats pretty much exactly what happens to mine after restoring or flashing but mine boots up.
Flash the firmware again but in odin options uncheck auto reboot. This time after flashing, the phone should stay off. Then you can boot to recovery.
If that doesnt work, whilst it is on the blue screen with android guy hold only vol down and power, phone will reboot, as soon as the screen goes off switch to recovery combo and this should force it to recovery.
https://forum.xda-developers.com/galaxy-s6-edge/development/rom-carhdrom-1-t3111519/page1427
Here is the link to custom ROM, it will work fine on your phone. You need to flash this through TWRP. If you need steps on how to do this please tell me.
Click to expand...
Click to collapse
Man I think I'm just going to try the custom to see if it works.
Would I need to flash a custom kernel or can it be stock?
After flashing the kernel with twrp I'm going to assume I would follow the same step.
1. flash TWRP custom recovery
2. copy .zip file to sdcard
3. go to recovery, install , select the .zip
Is that it or am I missing anything else when it comes to flashing ROMs through the recovery?
wahwahward said:
Man I think I'm just going to try the custom to see if it works.
Would I need to flash a custom kernel or can it be stock?
After flashing the kernel with twrp I'm going to assume I would follow the same step.
1. flash TWRP custom recovery
2. copy .zip file to sdcard
3. go to recovery, install , select the .zip
Is that it or am I missing anything else when it comes to flashing ROMs through the recovery?
Click to expand...
Click to collapse
Thats it.
Before installing rom go to wipe in TWRP, wipe data, dalvik, cache and system.
You dont need to flash a kernel though.
However when flashing carhd rom aroma installer will go through some choices, from there you can choose to install arter kernel. I reccomend doing this rather than keeping stock kernel.
Remember once installer complete and rom is installed leave it a while if it hangs on samsung logo screen. It can take a while to boot.
callumbr1 said:
Thats it.
Before installing rom go to wipe in TWRP, wipe data, dalvik, cache and system.
You dont need to flash a kernel though.
However when flashing carhd rom aroma installer will go through some choices, from there you can choose to install arter kernel. I reccomend doing this rather than keeping stock kernel.
Remember once installer complete and rom is installed leave it a while if it hangs on samsung logo screen. It can take a while to boot.
Click to expand...
Click to collapse
Currently waiting on the custom to download, don't have the quickest internet connection.
while I've been waiting, I've tried the stock ROM again.
something I forgot to mention before, which has happened a few times:
During the blue screen with the droid stating installing updates.
it switches to a screen with a big yellow triangle two dots below it and a dead droid.
After this I get to recovery, I wiped the cache and its getting to the samsung logo but freezes and then restarts all over again.
I'm just curious if you know what the yellow triangle thing means?
wahwahward said:
Currently waiting on the custom to download, don't have the quickest internet connection.
while I've been waiting, I've tried the stock ROM again.
something I forgot to mention before, which has happened a few times:
During the blue screen with the droid stating installing updates.
it switches to a screen with a big yellow triangle two dots below it and a dead droid.
After this I get to recovery, I wiped the cache and its getting to the samsung logo but freezes and then restarts all over again.
I'm just curious if you know what the yellow triangle thing means?
Click to expand...
Click to collapse
I think it normally means a failed update. Sometimes there are instructions to use smart switch other times it just means the update failed.
Try with the custom ROM and keep me updated.