Related
Okay so I installed a gingerbread ROM that keeps getting stuck at the boot screen. Yes, I installed the radio first and took all the correct steps.
But now I'm trying to simply boot into recovery to flash my backup of my other gingerbread ROM that actually worked. I boot into bootloader and it automatically tries updating the radio and there is no possible way to boot into recovery.
I don't know what to do.
When it asks you to install update, what if you say no, then you should be able to boot into recovery from the bootloader.
Sucks you're having issues.
castxaway said:
Okay so I installed a gingerbread ROM that keeps getting stuck at the boot screen. Yes, I installed the radio first and took all the correct steps.
But now I'm trying to simply boot into recovery to flash my backup of my other gingerbread ROM that actually worked. I boot into bootloader and it automatically tries updating the radio and there is no possible way to boot into recovery.
I don't know what to do.
Click to expand...
Click to collapse
Take the PBxxxx.zip file off of your zip card
I was wondering the same thing; thanks for the info.
castxaway said:
Okay so I installed a gingerbread ROM that keeps getting stuck at the boot screen. Yes, I installed the radio first and took all the correct steps.
But now I'm trying to simply boot into recovery to flash my backup of my other gingerbread ROM that actually worked. I boot into bootloader and it automatically tries updating the radio and there is no possible way to boot into recovery.
I don't know what to do.
Click to expand...
Click to collapse
Can't we do this in adb?
"adb reboot recovery"
g00s3y said:
Take the PBxxxx.zip file off of your zip card
Click to expand...
Click to collapse
Like g00s3y said, you must first remove the file you were trying (or successfully) flashed off your sd card. It's always best to remove this file once youre done with it. In your case you will probably need to use a sd card reader unless you can get your phone to mount.
castxaway said:
Okay so I installed a gingerbread ROM that keeps getting stuck at the boot screen. Yes, I installed the radio first and took all the correct steps.
But now I'm trying to simply boot into recovery to flash my backup of my other gingerbread ROM that actually worked. I boot into bootloader and it automatically tries updating the radio and there is no possible way to boot into recovery.
I don't know what to do.
Click to expand...
Click to collapse
I got the exact same problem
I ran into the same problem last night. I hooked my phone up to my laptop which has adb installed. When you're stuck at the start up screen, in a command prompt just type:
adb devices
You should see your phone show up under devices. If it shows up, then just type:
adb reboot recovery
This will get you into your recovery, and I just started the whole process over again. The 2nd time through everything worked great.
Hope this helps. (my phone wouldn't hard boot in to recovery, which I'm assuming is your problems also)
To hard boot into recovery, just hold the volume up key and turn the phone on. (correct me if I'm wrong)
Now I went and did it!
OK, so I was loading a new ROM and something went terribly wrong. I got stuck on the HTC, quietly brilliant screen. I then tried to boot into recovery thinking I would just restore the back up I had made and for some reason it jumped right to the HBoot and ran through some sequence of commands. Next thing I know I don't have root! So I'm screwing around trying to get adb to work on my computer and having problems with that. I try to recover again on the phone (power button and down volume) and notice that I still have s-off. Doesn't that mean I have root? But I also can't find a super user on the phone and none of my 'rooted' only programs work, they all say I don't have root. What do I do now?
Hboot is vol down and power.. not recovery. What that did was look for an update file on your SD card and flashed it. When you rooted your phone did you use the 1 click root? If so you probably just need to do step 3 again.. which gives you root and the super user app.. hopefully that's all it takes. When your done go into your SD card and remove the PG05 (there's more to the name don't have the whole file name memorized) zip file that's on there so it doesn't happen again
Sent from my ADR6400L using XDA App
BobVS said:
OK, so I was loading a new ROM and something went terribly wrong. I got stuck on the HTC, quietly brilliant screen. I then tried to boot into recovery thinking I would just restore the back up I had made and for some reason it jumped right to the HBoot and ran through some sequence of commands. Next thing I know I don't have root! So I'm screwing around trying to get adb to work on my computer and having problems with that. I try to recover again on the phone (power button and down volume) and notice that I still have s-off. Doesn't that mean I have root? But I also can't find a super user on the phone and none of my 'rooted' only programs work, they all say I don't have root. What do I do now?
Click to expand...
Click to collapse
You will have to re-root now. This should teach you to be more careful and not just go randomly flashing and updating things. Read up some more before just trying things.
Yeah probably like he said your best bet is to re do the whole process.. Idk what you flashed on your phone or anything so just be careful and do your research before jumping into things.
Sent from my ADR6400L using XDA App
castxaway said:
Okay so I installed a gingerbread ROM that keeps getting stuck at the boot screen. Yes, I installed the radio first and took all the correct steps.
But now I'm trying to simply boot into recovery to flash my backup of my other gingerbread ROM that actually worked. I boot into bootloader and it automatically tries updating the radio and there is no possible way to boot into recovery.
I don't know what to do.
Click to expand...
Click to collapse
When flashing a new rom make sure you check the md5sum. You can do this in adb or dl a program, just google it. If the md5sum comes back with the correct number then you know the dl isn't corrupted and you have the correct dl.
But as far as your current problem, you need to re-root.
Research your steps before you do them. I'm NOT a fan of 1-click. If you do it manually, and one step seems not to go right, then stop and ask on the forums. Someone should respond.
I was helping a buddy root his Evo 3D today. We managed to get S-off, but couldn't get Clockwork mod to install. Later I realized that his PC was not recognizing his 3vo. Installed the HTC drivers, still same problem. Installed HTC Sync, still the same. Now I can't do anything to his phone.
To make matters worse, he can't surf online. The phone boots up just fine, and the boot loader is unlocked, but this is where we currently stand.
Try to flash TWRP:
[RECOVERY] [EVO3D] TeamWin Recovery Project
Just dl the .zip file, rename it to PG86IMG.zip, put it on the root of the SD card. Then boot into bootloader (either through adb or take battery out, put back in and hold power + vol down). Then once it loads into bootloader (not fastboot) it will auto detect the .zip and ask you to update. Press vol up to say yes, wait for it to finish.
Now you'll have a working recovery, you can flash other already rooted ROMs using the flash zip utility in the recovery or if you just want to root the default ROM you have to flash this zip file with the 'flash zip' under recovery.
Is there supposed to be a root folder, or do I just simply place the main directory.
We placed the .zip file, after it was renamed into the main directory of the 3vo. Booted into HBOOT, but nothing happened. We were not prompted, just sat there in the HBOOT screen.
Evo-3D said:
Is there supposed to be a root folder, or do I just simply place the main directory.
We placed the .zip file, after it was renamed into the main directory of the 3vo. Booted into HBOOT, but nothing happened. We were not prompted, just sat there in the HBOOT screen.
Click to expand...
Click to collapse
The root of anything is the main directory.
Sent from my HTC Hero making C.R.E.A.M.
dastin1015 said:
The root of anything is the main directory.
Sent from my HTC Hero making C.R.E.A.M.
Click to expand...
Click to collapse
Many thanks, well if that is the case then nothing is happening. No prompt, just loads into HBOOT and our only option after that is to reboot manually.
Evo-3D said:
Many thanks, well if that is the case then nothing is happening. No prompt, just loads into HBOOT and our only option after that is to reboot manually.
Click to expand...
Click to collapse
Try again? Here is a link already renamed. Just put on root of SD card as before: http://db.tt/2ARi4m4
dastin1015 said:
Try again? Here is a link already renamed. Just put on root of SD card as before: http://db.tt/2ARi4m4
Click to expand...
Click to collapse
Weird, for some reason, going directly through the link that you provided worked. So now we have twrp on the phone. The 3vo recognized it, updated, but now still no phone or internet use.
Do I use twrp as a recovery? If so how? Should there be a twrp app now? Or do I just go back through HBOOT and select recovery from there?
Evo-3D said:
Do I use twrp as a recovery? If so how? Should there be a twrp app now? Or do I just go back through HBOOT and select recovery from there?
Click to expand...
Click to collapse
This might not help but try wiping the Dalvik Cache first. If that doesnt help, do a full wipe (factory reset/data wipe), install the ROM again and try that.
Theres no app that will show so go through HBOOT, select recovery (it will look like it is rebooting but it isn't - it is loading the recovery), then choose the backup/restore option.
Alternatively if the ROM you are using has 4 way reboot you can use that to boot directly into recovery.
EDIT: yes twrp is recovery.
Evo-3D said:
I was helping a buddy root his Evo 3D today. We managed to get S-off, but couldn't get Clockwork mod to install. Later I realized that his PC was not recognizing his 3vo. Installed the HTC drivers, still same problem. Installed HTC Sync, still the same. Now I can't do anything to his phone.
To make matters worse, he can't surf online. The phone boots up just fine, and the boot loader is unlocked, but this is where we currently stand.
Click to expand...
Click to collapse
There's a Su.zip Signed and Another version that's Unsigned!
Put Both versions on your SDCard and try Flashing one at a tine, see which one works?
Good Luck!
:NOW COMPLETE:
I would like to thank everyone that helped.
Switched PCs. Installed HTC drivers on 2nd PC, worked. Then went through the same root process. All done. I only with that veterans would also inform new root users that 'Error 16' will happen once the phone is rooted. All I had to do was call the provider and all was squared away.
Got one for you now. I was able to get my buddy's phone back. Seems that he can't remember his gmail PW. He swears that the PW he is giving me is correct, but he can't get in, not even through a PC. This blows, as he cannot use the market without a valid GM account. Not even getting a new GM account solves the problem. So I did some research and it seems that the original GM account associated wtih the phone cannot associate anymore, and trying to get a new GM account will not solve the issue. So if PW is incorrect, I'm assuming that the only thing that can be done is to reset the phone back to factory. My question is, doing so will cause me to update the phone to the newest version 1.50+. In doing so, no more root.
Are there any other options?
Going into setings and doing a factor reset doesn't update your phone to the 1.50 hboot and you don't lose root. Just flash a ROM that's updated to the latest ota I'm on clean ROM it runs perfect smooth as butter and don't forget to nandroid
Sent from my PG86100 using xda premium
When i was trying to boot into recovery mode it failed and it gave a superuser error. At this moment i had leedroid rom evo 3d gsm that is s-off. When i still had stock rom i never had this error but it seems like it was there all the time with the leedroid rom. Well so i was trying to boot into recovery. Tried it with power button and volume down button at same time, but this was failing. So i did it with rom manager. I used rom manager before when i installed leedroids rom. But now it didnt boot into recovery. I tried installing superuser again but it didnt seem to make any difference. with rootchecker i checked if i had root acces but it seemed i lost root acces :S. after retrying a couple of times my phone didnt boot back to the leedroid rom. I was trying a lot of things, with and without sd and sim. After about 20 reboots i tried power and volume down to go to bootloader and know it loaded. At bootloader start it loads some things and i saw no image blalbla dont really know what it meant. I tried to go to recovery but it wont boot, i get a white screen with htc and wont load anything. I tried all other options in bootloader too, to check if anything works but even a factory reset failed.
For me it looked like somehow my rom is f*cked and now i cant go to recovery mode somehow. I have rom on my sd so if i could go to recovery i could still flash. Does anyone know how i still might get to recovery mode or is there another way to still flash another rom. Maybe there are some people who can tell me more about leedroids rom, are there more people who got trouble with root acces?
anyone who might be able to help plz let me know, im so frustrated right now because i cant use my phone, i even need to think about a way to wake me up this morning because i always used my phone for alarm
That is a very easy to fix problem. First, download Clockworkmod recovery for your device (evo 3D GSM) or another recovery.
CWM 5.2.0 Shooteru: http://www.mediafire.com/?5kdr0c7xux2c64p
After download/finding the recovery, rename it to PG86DIAG. (or whatever it tries to scan for in bootloader. If its 2 things, it is the bottom one)
Place the file on your SD card somehow. (in your case you would need to take out the SD card and put it in another phone/adapter)
Boot into bootloader with volume down + power and it should scan for the file. When it asks if you want to do the update, press yes. After the recovery is installed, press power to reboot.
Do a battery pull while you are on the splash screen. Reboot back into bootloader with vol down + power and click on recovery. Wipe everything and flash the rom again. Reboot and you should be able to load the ROM with root and everything.
thx, im so happy to here your solution. Know lets search for my sd adapter, i know its somewhere . I will let you know later if it has worked
stonyhawk said:
thx, im so happy to here your solution. Know lets search for my sd adapter, i know its somewhere . I will let you know later if it has worked
Click to expand...
Click to collapse
You're welcome! I'll be watching the thread.
Oke i did what you said but when i boot into bootloader nothing has changed. It doesnt ask if i want to update anything. And if i go to recovery and try to boot it keeps hanging at the white screen with htc
btw, you said this:after download/finding the recovery, rename it to PG86DIAG. (or whatever it tries to scan for in bootloader.
Do you mean it might be other name i have to make it? How do i know this?
stonyhawk said:
Oke i did what you said but when i boot into bootloader nothing has changed. It doesnt ask if i want to update anything. And if i go to recovery and try to boot it keeps hanging at the white screen with htc
btw, you said this:after download/finding the recovery, rename it to PG86DIAG. (or whatever it tries to scan for in bootloader.
Do you mean it might be other name i have to make it? How do i know this?
Click to expand...
Click to collapse
It is probably a different name.
When you boot into bootloader, it scans for 2 files and says not found, right?
The second file it scans for is the one you want to rename it to.
hmke, ye it scans for files but its going fast so cant see it very well. I see about 5 things get scanned
oke first thing it scanned is called PG86DIAG.zip, 2nd is PG86DIAG.nbh, 3th is PG86IMG.zip, 4th is PG86IMG.nbh, 5th is PG86IMG.tar, 6th is PG86IMG.aes, 7th is PG86IMG.enc
All this things are scanned and then it says no image
From what I can read if you lost root then you are s-on on the bootloader right? if so installing recovery through bootloader wont work... check if you have S-on or S-off on bootloader if you have s-on you will need to use a official update to restore your phone...
stonyhawk said:
hmke, ye it scans for files but its going fast so cant see it very well. I see about 5 things get scanned
oke first thing it scanned is called PG86DIAG.zip, 2nd is PG86DIAG.nbh, 3th is PG86IMG.zip, 4th is PG86IMG.nbh, 5th is PG86IMG.tar, 6th is PG86IMG.aes, 7th is PG86IMG.enc
All this things are scanned and then it says no image
Click to expand...
Click to collapse
Do PG86IMG. Also, if it says S-On at the top of the bootloader, you will need to get S-Off with revolutionary again.
1107963 said:
From what I can read if you lost root then you are s-on on the bootloader right? if so installing recovery through bootloader wont work... check if you have S-on or S-off on bootloader if you have s-on you will need to use a official update to restore your phone...
Click to expand...
Click to collapse
No im still s-off, but when my phone was less ****ed as it is now and i could still boot normaly, i already had some strange things with leedroid rom. superuser never seems to be working well. i couldnt give root acces, it gave an error when i try. even through root chekker it says no root, but i thought that might have something to do with superuser.
stonyhawk said:
No im still s-off, but when my phone was less ****ed as it is now and i could still boot normaly, i already had some strange things with leedroid rom. superuser never seems to be working well. i couldnt give root acces, it gave an error when i try. even through root chekker it says no root, but i thought that might have something to do with superuser.
Click to expand...
Click to collapse
Instead of renaming to PG86DIAG, rename to PG86IMG and see if that works.
yousefak said:
Do PG86IMG. Also, if it says S-On at the top of the bootloader, you will need to get S-Off with revolutionary again.
Click to expand...
Click to collapse
do you mean name the file PG86IMG and not PG86DIAG?
lol your answer came faster
Oke still no difference, but it is chekking for a .zip file right? Im not sure if its .zip right now, is this the reason why its failing?
Ummmmm I dont see any other choice but this... you can follow this tutorial to get your phone working...
Code:
http://forum.xda-developers.com/showthread.php?t=1262457
You are going to need to revert back to stock
I had the same problem a month back and was able to fix it.
Also don't worry if you can still get to the boot loader its fixable.
stonyhawk said:
do you mean name the file PG86IMG and not PG86DIAG?
lol your answer came faster
Oke still no difference, but it is chekking for a .zip file right? Im not sure if its .zip right now, is this the reason why its failing?
Click to expand...
Click to collapse
So it acts as if there is no .zip at all? Like it says "No image found"?
Double check if its a zip and the file is named properly. If it doesn't recognize it, there is a problem with your SD card/bootloader.
Oke when i put the .zip in a clockworkmod folder it didnt see it but now it shows parsing behind the PG86DIAG.zip and the PG86DIAG.img says no image or wrong image. All other thing still say no image
I tried the .zip you uploaded and now it could load the image , trying to flash now
stonyhawk said:
Oke when i put the .zip in a clockworkmod folder it didnt see it but now it shows parsing behind the PG86DIAG.zip and the PG86DIAG.img says no image or wrong image. All other thing still say no image
Click to expand...
Click to collapse
I see what you're doing wrong. Don't put the zip in a clockworckmod folder. Put it on the root of your sd card.
(just directly on the sd card)
yousefak said:
I see what you're doing wrong. Don't put the zip in a clockworckmod folder. Put it on the root of your sd card.
(just directly on the sd card)
Click to expand...
Click to collapse
Good catch on that one.
If you don't put it directly on the root of your sd card then the boot loader will not be able to find the zip and flash it.
Oke thx, i finally booted into recovery . I first had to delete the .zip again because it was trying to update again when i didnt. Im so happy now , couldnt done this without your help so i will push the thx button few times^^
stonyhawk said:
Oke thx, i finally booted into recovery . I first had to delete the .zip again because it was trying to update again when i didnt. Im so happy now , couldnt done this without your help so i will push the thx button few times^^
Click to expand...
Click to collapse
You're welcome!
Also, one thank is enough
Okay folks, I am at oss and need to know if I am just flat out screwed or if maybe, just
Maybe I might have a shot at storing my EVO 3d. I was running meanrom. Everything was running smoothly but I decided to give ViperROM a shot. So I d a wipe, rebooted into recovery and flashed ViperROM. Initially I thought everything had gone according to plan until I realized something was amiss when I attempted to start 4g. 4g wouldn't start. I did some looking into and came to tonclusion that because as far as I could tell because I had been running meanrom when I flashed viper the kernel no longer stock was not compatible with viper. So I started flash image GUI, found stockkernel.zip on my sd card and flashed or so I thought the stock kernel in hopes that after I did then the 4g would work on ViperROM. Well I was mistaken. When the phone rebooted, after the initial HTC screen rather than next seeing the ViperROM boot animation my screen went black. It remained there laughing at me till the phone automatically rebooted and then once again went to a darn black screen. It seems my phone is stuck in an endless loop. HTC screen, black scree reboot, HTC... Ect. I then booted into recovery wiped again and tried to then just reinstall meanrom. Well, according twrp recovery the installation went smoothly but after HTC screen, my phone goes straight to black screen. Ive tried various variations of reinstallations and nothing has worked so far. Am I stuck like this or is there something that can be done. Any pointers or suggestions would be more than appreciated
le?OR am I
3ncrypt3d said:
Okay folks, I am at oss and need to know if I am just flat out screwed or if maybe, just
Maybe I might have a shot at storing my EVO 3d. I was running meanrom. Everything was running smoothly but I decided to give ViperROM a shot. So I d a wipe, rebooted into recovery and flashed ViperROM. Initially I thought everything had gone according to plan until I realized something was amiss when I attempted to start 4g. 4g wouldn't start. I did some looking into and came to tonclusion that because as far as I could tell because I had been running meanrom when I flashed viper the kernel no longer stock was not compatible with viper. So I started flash image GUI, found stockkernel.zip on my sd card and flashed or so I thought the stock kernel in hopes that after I did then the 4g would work on ViperROM. Well I was mistaken. When the phone rebooted, after the initial HTC screen rather than next seeing the ViperROM boot animation my screen went black. It remained there laughing at me till the phone automatically rebooted and then once again went to a darn black screen. It seems my phone is stuck in an endless loop. HTC screen, black scree reboot, HTC... Ect. I then booted into recovery wiped again and tried to then just reinstall meanrom. Well, according twrp recovery the installation went smoothly but after HTC screen, my phone goes straight to black screen. Ive tried various variations of reinstallations and nothing has worked so far. Am I stuck like this or is there something that can be done. Any pointers or suggestions would be more than appreciated
le?OR am I
Click to expand...
Click to collapse
Your phone is alright and working , dont worry.
..............................................................................
I am assuming you are unlocked via htcdev.com .
Follow the steps:
Copy the img file of the recovery you are using to the fastboot/adb folder (folder which you have used to unlock the bootloader).
1.Now boot your phone in bootloader
2.Select Fastboot and connect to PC.(phone should say "fastboot-usb")
3.now open command prompt and navigate to your fastboot folder.
4.Type "fastboot boot <recovery name>.img". Your recovery should boot now.
5.Wipe everything , and install any ROM you want.
6.Then reboot your phone as normal and your problem should be solved.
7.If you get stuck at HTC screen or that black screen , just open the zip file of the ROM that you've just flashed and copy the boot.img file to your fastboot/adb folder > then boot your phone into bootloader > select fastboot > connect to PC > in command prompt type "fastboot flash boot boot.img" > then reboot.
Hope this helps........
Did you make a nand backup before you flashed vipers rom? Or do what he said ^^^^^^^
Did you look in the meanrom folder on ur SD card. Inside of there is the stock kernel. Second try to flash cleanROM and see if that helps. And if that doesn't work, look for the modifiedsuperwipe.zip. if all else fails..... I had the boot loop a while a go. All I did was flash the modifiedsuperwipe.zip and then flashed the ROM of choice and i was good to go. Hope this helps a lil
I'm stumped
So I did the modified wipe. I thought it was going to be smooth sailing well, I plugged in the phone and went to fast boot tried sending my phone a command line but it hangs on waiting for device. So now I'm stuck wondering wtf. No go on fastboot commands for now that is unless someone has an idea on that. Is there a way to perhaps browse root from recovery and transfer the boot image from my sd card to the folder in needs to. Go to? Or can I mount as a usb storage device and move the boot.img file to where it needs to go from the computer. I'm so desperate to fix this issue without surrendering to defeat and bringing it somewhere for someone else to do it. Hell I probably can't afford it if I have to. Whelp, if you have any thoughts I'm grateful. Thanks for the assistance thus far fellas. When bootloader loads it says I believe loading PG86DIAG.zip no image found if that means any more to any of you. I also tried reinstalling meanrom. I booted into recovery via hold power +. Volume up then choose recovery. Twrp loads. Choose meanrom zip flash image. According to twrp this goes down swell with not a problem but when I boot to system still I get the black screen. It mocks me still.
oh yes. Probably worth mentioning. Today I was working from a bit installation of windows. It was a pain on the as o get the adb drivers workingnet but finally found something called pdapal installed it and it got things squared away or so I thought on the windows drivers side of things. So in device manager there are no errors and it says the android device is working properly now alert symbols over the driver or anything but still can't get the phone to accept fastboot commands.
3ncrypt3d said:
So I did the modified wipe. I thought it was going to be smooth sailing well, I plugged in the phone and went to fast boot tried sending my phone a command line but it hangs on waiting for device. So now I'm stuck wondering wtf. No go on fastboot commands for now that is unless someone has an idea on that. Is there a way to perhaps browse root from recovery and transfer the boot image from my sd card to the folder in needs to. Go to? Or can I mount as a usb storage device and move the boot.img file to where it needs to go from the computer. I'm so desperate to fix this issue without surrendering to defeat and bringing it somewhere for someone else to do it. Hell I probably can't afford it if I have to. Whelp, if you have any thoughts I'm grateful. Thanks for the assistance thus far fellas. When bootloader loads it says I believe loading PG86DIAG.zip no image found if that means any more to any of you. I also tried reinstalling meanrom. I booted into recovery via hold power +. Volume up then choose recovery. Twrp loads. Choose meanrom zip flash image. According to twrp this goes down swell with not a problem but when I boot to system still I get the black screen. It mocks me still.
Click to expand...
Click to collapse
4ext has kernel flashing for hboot 1.5 works good i am no good with hboot i got lucky i got soff in 1.5 look into 4ext its a good recovery
Thanks
I've got twrp flashed fine. However my phone won't respond to commands while in fastboot from the command prompt. It says waiting for device and never responds. Is there a possibility that usb debugging is not working. Is there a way to the? this on from recovery if you needed. I'm not nt intimidated by advanced procedures Im an analyst programmer and am stuck doing super boring things most of the day. I can't believe I'm being thrown a curve ball like this. I'm definitely humbled. Just saying that anything you throw out there Ide be willing to give a shot at this point.
3ncrypt3d said:
I've got twrp flashed fine. However my phone won't respond to commands while in fastboot from the command prompt. It says waiting for device and never responds. Is there a possibility that usb debugging is not working. Is there a way to the? this on from recovery if you needed. I'm not nt intimidated by advanced procedures Im an analyst programmer and am stuck doing super boring things most of the day. I can't believe I'm being thrown a curve ball like this. I'm definitely humbled. Just saying that anything you throw out there Ide be willing to give a shot at this point.
Click to expand...
Click to collapse
could be the abd drivers are not on your pc for your phone the reason i said to get ext4 recovery is you can flash kernels now you still cant do that with twrp but with your phone plunged in, in fastboot go to my computer right click propertys go to hardware tab click device manager and look for a question mark that says android phone if it is their you need the drivers
hope i helped you out
3ncrypt3d said:
I've got twrp flashed fine. However my phone won't respond to commands while in fastboot from the command prompt. It says waiting for device and never responds. Is there a possibility that usb debugging is not working. Is there a way to the? this on from recovery if you needed. I'm not nt intimidated by advanced procedures Im an analyst programmer and am stuck doing super boring things most of the day. I can't believe I'm being thrown a curve ball like this. I'm definitely humbled. Just saying that anything you throw out there Ide be willing to give a shot at this point.
Click to expand...
Click to collapse
Are you sure you are accessing fastboot from bootloader ? By your words, it seems like you are checking fast boot in settings> power
Does the bootloader say fastboot-usb? If not select it and press power.
Sent from my PG86100 using XDA App
Still Trying
Yeah, I'm definitely in fastboot through bootloader. Yes it says fastboot usb. I think despite the fact that it says drivers are installed properly in device manager there might still be some kind of driver issue. I'm away from home and don't have access to. My usual computers? I'm stuck on an installation of windows 7 64bit. Originally I was having issues getting the right drivers installed and so I installed pda net and that seemed to solve the issue in device manager but I'm still having issues. If there's some recovery I could flash which would allow me toove boot.img to the right path manually that might be a way I could solve this. Hell, I'll give anything a try. So that's where I am so far. Any advice on what I might be doing wrong or where I might go from here?
hboot 1.5 s-on
I've got the same specs as you save the rom and kernel. @ itzloltraim.
I did try flashing clockwork mod using rom manager before my phone started having issues but even though rom manager said it flashed when I booted to recovery next twrp was still there. Is there somewhere I can download a flashable zip from? I couldn't find one last time I looked. From what I remember the Dev Site Links to rommanager to get it. If you have a link that would be a help.
Questions
Hboot?
Base?
Have you tried flashing clockworkmod?
Sent from my PG86100 using Tapatalk
iTzLOLtrain said:
Questions
Hboot?
Base?
Have you tried flashing clockworkmod?
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
That plus what is he doing rooting or trying to flash a recovery?
Yea, I have the same problem...
I was running MeanROM4.1 with the dodava kernel. Being an idiot I flashed the new Anthrax kernel and now my phone gives me a black screen. When the phone starts up, theres no lock ring. Ive been trying to flash another kernel but i dont seem to be doing it properly. im using 4ext as recovery.
Im currently performing a Superwipe then factory reset. Ill reply with my findings. Good thing I backed up at MeanROM3.91, but if I cant get my screen to work...shall I assume bricked?
**problem solved. I flashed a kernel using the fastboot method. Someone posted it and it worked fine for me.**
Hello XDA members,
I was hoping somebody would help me out, I'm fairly new when it comes to installing custom roms so I require your patience. I don't know how to install a custom rom onto my Bell Atrix HD MB886, everytime I try it says abortion failed, what can I do to fix this. I have wiped data and all that probably 5 times in the past week alone. I would like to know how to successfully install roms without errors. Both the times that I have done this I had my bootloader unlocked, and I had clockword recovery mod latest version 6.0.4.4. I bought an SD card today to help install the roms because otherwise I can't do it from my internal storage. I really hope somebody can help me out.
Regards,
Roger
riekkir said:
Hello XDA members,
I was hoping somebody would help me out, I'm fairly new when it comes to installing custom roms so I require your patience. I don't know how to install a custom rom onto my Bell Atrix HD MB886, everytime I try it says abortion failed, what can I do to fix this. I have wiped data and all that probably 5 times in the past week alone. I would like to know how to successfully install roms without errors. Both the times that I have done this I had my bootloader unlocked, and I had clockword recovery mod latest version 6.0.4.4. I bought an SD card today to help install the roms because otherwise I can't do it from my internal storage. I really hope somebody can help me out.
Regards,
Roger
Click to expand...
Click to collapse
Hi there. A failed abortion certainly seems like an issue... I guess I am not totally clear on the status here. You say that you had CWM. Do you still have it? Bootloader is still unlocked? What rom are you trying to install? Are you certain it's for the Bell version and not like the AT&T one? What is the exact error message?
es0tericcha0s said:
Hi there. A failed abortion certainly seems like an issue... I guess I am not totally clear on the status here. You say that you had CWM. Do you still have it? Bootloader is still unlocked? What rom are you trying to install? Are you certain it's for the Bell version and not like the AT&T one? What is the exact error message?
Click to expand...
Click to collapse
No I don't have it atm as I just wiped the data/cache last night but will I already have CWM, I just need to unlock the bootloader and try again...I'm trying to install this one:
Android 4.4.2 KitKat Mokee Rom, and it says the version is a nightly. Yes I'm positive it's the Bell Version as I purchased it at a Bell Store and my carrier is Bell. The error message is "Installation Aborted." It begins installing, and then halfway through I get that error message. How do I fix this?
I figured you knew what phone you had. I was wondering if you had a rom built for the Bell version vs an ATT one. But since you are using a CM based rom, it obviously doesn't matter. Curious as to why you are bothering with relocking the bootloader? But I suggest to either try a different version of the rom, or to change your recovery to one of the Philz Touch versions as that's what some of the other users in that thread for the rom for your phone were using. You can find them here:
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/moto_msm8960
es0tericcha0s said:
I figured you knew what phone you had. I was wondering if you had a rom built for the Bell version vs an ATT one. But since you are using a CM based rom, it obviously doesn't matter. Curious as to why you are bothering with relocking the bootloader? But I suggest to either try a different version of the rom, or to change your recovery to one of the Philz Touch versions as that's what some of the other users in that thread for the rom for your phone were using. You can find them here:
Click to expand...
Click to collapse
No I was bothering to unlock it again, not lock it. Where can I find different versions for the 4.4.2 Mokee Rom? I've tried using the Philz Touch version: Motorola Atrix HD One Click Philz recovery installer and when I tried it a couple of times it said it failed to install although I'm not sure why. I came across these images the other day but how do I use the .img files on my device, as I'm not sure to proceed from here once I have them downloaded.
riekkir said:
No I was bothering to unlock it again, not lock it. Where can I find different versions for the 4.4.2 Mokee Rom? I've tried using the Philz Touch version: Motorola Atrix HD One Click Philz recovery installer and when I tried it a couple of times it said it failed to install although I'm not sure why. I came across these images the other day but how do I use the .img files on my device, as I'm not sure to proceed from here once I have them downloaded.
Click to expand...
Click to collapse
I was curious as why you relocked it in the first place.
Where are you getting Mokee from that doesn't have a link to their Downloads?
http://forum.xda-developers.com/showthread.php?t=2619489
For installing recovery:
http://forum.xda-developers.com/showthread.php?t=2262726
es0tericcha0s said:
I was curious as why you relocked it in the first place.
Where are you getting Mokee from that doesn't have a link to their Downloads?
For installing recovery:
Click to expand...
Click to collapse
thanks will try this out and let you know later how it works! I download the custom rom from true android blogspot.ca (can't post links just yet, annoying).
riekkir said:
thanks will try this out and let you know later how it works! I download the custom rom from true android blogspot.ca (can't post links just yet, annoying).
Click to expand...
Click to collapse
Right on. Well, you should bookmark the thread here on XDA because that's typically where the action happens.
es0tericcha0s said:
Right on. Well, you should bookmark the thread here on XDA because that's typically where the action happens.
Click to expand...
Click to collapse
Okay so I'm trying it now and the program won't even open :/
Odd. I just downloaded it to test and I didn't have any issues. If you can't get the actual application / exe file to open, then just use the Main-Skip.bat. Does the same thing.
If it doesn't open still, make sure that you have your anti-virus off as sometimes those interfere with programs like this. Might also try as admin.
es0tericcha0s said:
Odd. I just downloaded it to test and I didn't have any issues. If you can't get the actual application / exe file to open, then just use the Main-Skip.bat. Does the same thing.
If it doesn't open still, make sure that you have your anti-virus off as sometimes those interfere with programs like this. Might also try as admin.
Click to expand...
Click to collapse
Okay I wasn't looking at the actual .exe sorry, I got it to work and all I installed the Philz One Touch Recovery from that program, just downloaded a different rom and all and then I select the apply update from external storage and when it gets to the verifying update package, it gave me the same error message as yesterday, Installation Aborted.
So again, how do I fix this, am I doing something wrong? Why won't my custom rom install?
riekkir said:
Okay I wasn't looking at the actual .exe sorry, I got it to work and all I installed the Philz One Touch Recovery from that program, just downloaded a different rom and all and then I select the apply update from external storage and when it gets to the verifying update package, it gave me the same error message as yesterday, Installation Aborted.
So again, how do I fix this, am I doing something wrong? Why won't my custom rom install?
Click to expand...
Click to collapse
I don't think that is the most updated version. What's the version number of the recovery that was installed? It should be listed on the main page of it when you boot there. I was suggesting to use one of the new ones. It might have something to do with the SELinux support that KK roms need. You just have to put the img file in the tools folder and rename the new one the same. But here's no other error that shows up other than Installation Aborted? I was thinking usually it would have an error code or some other message.Have you checked the md5 of the rom zip to make sure it's not corrupted (if the dev provided it)?
es0tericcha0s said:
I don't think that is the most updated version. What's the version number of the recovery that was installed? It should be listed on the main page of it when you boot there. I was suggesting to use one of the new ones. It might have something to do with the SELinux support that KK roms need. You just have to put the img file in the tools folder and rename the new one the same. But here's no other error that shows up other than Installation Aborted? I was thinking usually it would have an error code or some other message.Have you checked the md5 of the rom zip to make sure it's not corrupted (if the dev provided it)?
Click to expand...
Click to collapse
Use one of the new versions of that program or to use the latest CWM which I have been. Okay I really don't know how to do that and where to move it to, how do I do such a thing? No it just says Installation Aborted... How would I do that? And yes I downloaded the new rom directly from his site.
riekkir said:
Use one of the new versions of that program or to use the latest CWM which I have been. Okay I really don't know how to do that and where to move it to, how do I do such a thing? No it just says Installation Aborted... How would I do that? And yes I downloaded the new rom directly from his site.
Click to expand...
Click to collapse
Look in the tools folder of the zip you downloaded. Download the newest Philz Touch img from the other link from earlier. Rename it to replace the one in the tools folder. Redo the recovery install. But you didn't say what version you already have.
es0tericcha0s said:
Look in the tools folder of the zip you downloaded. Download the newest Philz Touch img from the other link from earlier. Rename it to replace the one in the tools folder. Redo the recovery install. But you didn't say what version you already have.
Click to expand...
Click to collapse
Okay that did the trick, properly got philz recovery installed, did the install again, this time it worked, clicked reboot and now it's stuck at the Dual Core bootlogo screen
riekkir said:
Okay that did the trick, properly got philz recovery installed, did the install again, this time it worked, clicked reboot and now it's stuck at the Dual Core bootlogo screen
Click to expand...
Click to collapse
Did you do a full wipe, including wiping /system?
If you didn't, it should be under Mounts and Storage > Format /system of something of that sort.
es0tericcha0s said:
Did you do a full wipe, including wiping /system?
If you didn't, it should be under Mounts and Storage > Format /system of something of that sort.
Click to expand...
Click to collapse
No I forgot to do that dammit, can't get into recovery mode and my computer doesn't recognize my phone now, think I bricked it.
riekkir said:
No I forgot to do that dammit, can't get into recovery mode and my computer doesn't recognize my phone now, think I bricked it.
Click to expand...
Click to collapse
Pop the battery out for a bit, then pop it back in and hold Volume Down while powering up. Should get you into fastboot where you can skip to the recovery.
es0tericcha0s said:
Pop the battery out for a bit, then pop it back in and hold Volume Down while powering up. Should get you into fastboot where you can skip to the recovery.
Click to expand...
Click to collapse
The battery doesn't come out of my phone as you can't take the back off. I got into fast boot easily them selected recovery and nothing happened, I think my phone is screwed
riekkir said:
The battery doesn't come out of my phone as you can't take the back off. I got into fast boot easily them selected recovery and nothing happened, I think my phone is screwed
Click to expand...
Click to collapse
Oh yea, forgot you have to undo the screws on the bottom. So you scroll down to hit recovery and use the Power button to select and it doesn't do anything? That's odd.. Try and reflash the recovery since you can still get to fastboot. If that doesn't work, you're not totally screwed since you can still get to fastboot, that means you should be able to restore it to stock and start over.
Alternatively, if you have fastboot set up, you could make sure that philz touch is in the fastboot folder and use this command:
fastboot boot recovery nameofphilztouchfile.img
If you don't have fastboot, then just grab this one: http://forum.xda-developers.com/showthread.php?t=2317790 , drop the recovery img in that folder and open the CMD prompt on your computer and change directories to it and run the command.