Help!! My SGS2 is stuck on a screen with an orange triangle and excmamation mark between a cellphone and computer after a ROM flash attempt!
I can go to Downloading mode and Odin can detect my smartphone but i don't know what else to do...
Flash a full (different to whatever you were trying) ROM, problem solved.
Sent from my GT-I9100 using XDA App
yep, that's just a soft brick.
since you can access DL mode, just reflash with odin and normally problem solved
Haaa, thx all i fixed it! ^^
It took me 5 hours to find out what i had to do and find the stock Firmware tho...
But all fine now
Hello,
I've got the same problem but it seems I can't go into download mode. What am I doing wrong? What else can I try?
My SGS2 is not rooted and was on Android 2.3.3. Kies told me there was an update available to android 2.3.4 so I went for it.
But I'm really disappointed, now my phone is completety stuck on this screen with the phone...orange triangle with exclamation mark (warning)...PC.
EDIT : Samsung Kies proposes to do an emergency recovery, but in the end it also fails.
Fortunately, I took a screenshot before upgrading. See attachment.
Please help me.
kind regards,
Andrew
andrewvbv said:
Hello,
I've got the same problem but it seems I can't go into download mode. What am I doing wrong? What else can I try?
My SGS2 is not rooted and was on Android 2.3.3. Kies told me there was an update available to android 2.3.4 so I went for it.
But I'm really disappointed, now my phone is completety stuck on this screen with the phone...orange triangle with exclamation mark (warning)...PC.
EDIT : Samsung Kies proposes to do an emergency recovery, but in the end it also fails.
Fortunately, I took a screenshot before upgrading. See attachment.
Please help me.
kind regards,
Andrew
Click to expand...
Click to collapse
If your phone is not rooted, you still have your warranty, bring it back to the shop and ask for a new one
I bought it an amazon. But I'd prefer to have a solution right now instead of having to complain.
I continued my quest on the net... Apparently, a usb jig might take me out of this screen and back to the download mode. Can somebody confirm this?
andrewvbv said:
I bought it an amazon. But I'd prefer to have a solution right now instead of having to complain.
I continued my quest on the net... Apparently, a usb jig might take me out of this screen and back to the download mode. Can somebody confirm this?
Click to expand...
Click to collapse
One minus Did you follow the Kies recovery instructions .
One turn off and remove battery for a short period .
Two turn on
Three try recovery mode
Four try download mode ..
Five yes USB jig may enable you to get to download mode and from that you can flash a stock Samsung rom .
Six service centre
jje
Thanks JJEgan. I'll try once more and let you know. Assuming that I am able to get in download mode, why should I use a stock kernel and not the normal firmware I had before? Sorry about my question, but this is all new for me.
A USB Jig should be standard equipment for anybody who flashes their Galaxy phone, IMO.
andrewvbv said:
Thanks JJEgan. I'll try once more and let you know. Assuming that I am able to get in download mode, why should I use a stock kernel and not the normal firmware I had before? Sorry about my question, but this is all new for me.
Click to expand...
Click to collapse
Download Odin, download stock ROM, use Windows Task Manager to kill any Kies-related processes. Then turn off the phone, turn it back on in download mode and flash using Odin. Do not tick repartition and do not use the PIT file if the stock ROM comes with one.
Hi,
Thanks to this forum I managed to bring my SGS2 alive again step by step after that Kies broke it during the android upgrade from 2.3.3 to 2.3.4... Moreover, I am in the official 2.3.4 version now without using Kies!! ;-) Here's my story:
In the end, I was able leave the screen with the "phone..orange warning triangle..computer". and I was able to go in download mode without a usb jig. You have to press the 3 keys (volume down, home, and power on) quite a few seconds without releasing them. And then the download warning menu appears, press volume up to confirm that you want go go in download mode. And I was in "download mode'. Anyway, I will buy a jig ;-)
I tried once more the emergency recovery with samsung Kies without success. Failed.
Then with Odin I had problem. It was stuck at step "setup connection". Kies was not running and was not visible in the system tray. Though in the task manager, I still had 2 Kies* processes. Kiestrayagent.exe and another one starting with Kies and 4 letters (sorry I didn't write it down). I killed both processes. One step further... Then Odin was stuck on step complete(write) operation failed. Never found why. I tried several times, battery in and out again, without success. This was on a Win7 32bit. Latest Kies version.
In the end I installed Odin on another PC Win7 64bits. I had to install Kies also on it otherwise Win7 says "no driver found" when you plug in the usb cable of the SGS2. And on this computer, flashing with Odin worked perfectly.
Thanks again to all people who helped me + also thanks to this super forum where I could find the official firmware I needed after that Kies broke down my phone.
Andrew
hi
Spl1tz said:
Haaa, thx all i fixed it! ^^
It took me 5 hours to find out what i had to do and find the stock Firmware tho...
But all fine now
Click to expand...
Click to collapse
but tell me how you got it fixed
help i have the same problem
Spl1tz said:
Help!! My SGS2 is stuck on a screen with an orange triangle and excmamation mark between a cellphone and computer after a ROM flash attempt!
I can go to Downloading mode and Odin can detect my smartphone but i don't know what else to do...
Click to expand...
Click to collapse
i have the same problem how can i silve it
skhoudary said:
i have the same problem how can i silve it
Click to expand...
Click to collapse
Simple solution:
Read the posts above!
"To err is human, to forgive is divine"
Sent from my SGS II
Related
Hello, I was attempting to flash Clockwork Mod on my G5, whilst doing it Odin crashed and now my phone is messed up.
It will turn on but a PC-Triangle with a ! in the middle-Phone, it will go into Download Mode but Odin doesn't recognise it so i can't re-flash it, any ideas?
Please help, this is urgent.
The phone itself is on stock, it turns on but displays the error i have described above, it will go into download mode but Odin doesn't recognsie it.
Thanks, Curtis.
CurtisAndroid5 said:
Hello, I was attempting to flash Clockwork Mod on my G5, whilst doing it Odin crashed and now my phone is messed up.
It will turn on but a PC-Triangle with a ! in the middle-Phone, it will go into Download Mode but Odin doesn't recognise it so i can't re-flash it, any ideas?
Please help, this is urgent.
The phone itself is on stock, it turns on but displays the error i have described above, it will go into download mode but Odin doesn't recognsie it.
Thanks, Curtis.
Click to expand...
Click to collapse
No need to worry about it.
Uninstall the drivers associated with the phone. Are you using Windows?
For XP: Go to start > Control Panel > System > Click on the Hardware tab and then Device Manager. Find the driver for the phone. I remember it has a yellow icon, and the drivers name is a mix of capital letters
It's probably similar for Windows 7, but i wouldn't know.
Uninstall the driver associated with the phone, then reinstall by plugging your phone into the computer in download mode. It would help to uninstall and reinstall Odin as well, just in case.
If you get Odin to work, just work away like you would.
Thanks for your reply, i have uninstalled the drivers, but when i plugged my phone back in, the drivers are not being installed and i can not find them on the internet. Any ideas?
I know how i messed up, i completely forgot to root my phone before i started to flash, any ideas on how i can just get my phone back to its normal working everyday self?
Will i just need to get the device recognised by Odin then insert the Ops file and the I5500.tar file and flash it back to stock?
edit- managed to get drivers installed, now how do i fix my phone? Just flash the .OPS and the stock I5500.tar file?
CurtisAndroid5 said:
Thanks for your reply, i have uninstalled the drivers, but when i plugged my phone back in, the drivers are not being installed and i can not find them on the internet. Any ideas?
I know how i messed up, i completely forgot to root my phone before i started to flash, any ideas on how i can just get my phone back to its normal working everyday self?
Will i just need to get the device recognised by Odin then insert the Ops file and the I5500.tar file and flash it back to stock?
edit- managed to get drivers installed, now how do i fix my phone? Just flash the .OPS and the stock I5500.tar file?
Click to expand...
Click to collapse
I think it'll fail again if your phone isn't rooted. You can't get rid of the Computer-Caution-Phone image without succesfully using Odin.
You could try to flash the .tar and .ops file again. I can't see it working though unfortunately.
Any ideas then? Is there a way to root my phone via Odin or anything?
CurtisAndroid5 said:
Any ideas then? Is there a way to root my phone via Odin or anything?
Click to expand...
Click to collapse
I've never heard of rooting your phone through the download mode or through Odin.
Maybe there's a file you can put on your phone through Odin which doesn't require root? I'll take a look around for you.
Thank you so much, i appreciate it, I'm 16, can't really live without a phone especially with college parties coming up in the next few days aha, I knew i shouldn't of risked around with flashing again!
CurtisAndroid5 said:
Thank you so much, i appreciate it, I'm 16, can't really live without a phone especially with college parties coming up in the next few days aha, I knew i shouldn't of risked around with flashing again!
Click to expand...
Click to collapse
Just thinking that Odin is a program which requires root so there won't be any file you can transfer when unrooted. I had a quick glance over at the Odin thread, and the first step is that you have to root your phone.
I'm sorry, but there's nothing else I can think of which might help. Maybe if somebody with a bit more knowledge/expeerience sees this thread, they might help.
Can Odin detect your phone?
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
CurtisAndroid5 said:
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
Click to expand...
Click to collapse
I don't know of any others, but Superoneclick works fine for the Galaxy 5. Like I said, I've never heard of using it during download mode so just be careful with that.
If Odin detects your phone, have you tried just closing Odin and plugging out the USB safely?
Can't use Superoneclick as my phone isn't in USB Debugging and i obviously can't change that aha I have just tried that, no luck with the closing Odin and unplugging it, should i try installing CWM again or is that a bad idea?
CurtisAndroid5 said:
Can't use Superoneclick as my phone isn't in USB Debugging and i obviously can't change that aha I have just tried that, no luck with the closing Odin and unplugging it, should i try installing CWM again or is that a bad idea?
Click to expand...
Click to collapse
It's a bad idea because it just won't work. Odin will crash again.
I don't know what to do I'm afraid.
Looks like my phone is shagged due to my own stupidity, I forgot to root it because my phone was previously rooted and it went back for repairs, then I completely forgot i didnt install Root access -.-
Do you think i can recover my phone or is it well and truly gone?
Well it's not like your phone is bricked or anything. It's just broken a connection to Odin and it won't boot until it's completed.
You could always return it for repairs again. Your warranty might be broken though.
If I happen to come across a DIY fix then I'll post it here.
Thanks for your help mate, i've decided to just send my phone back for repairs, buy a new phone (Probably a Blackberry for BBM and stuff with all my mates), and sell my phone once i get it back.I have gave up on Samsung mobiles.
Thank you.
Did you send your phone alredy? Uncompress the firmware.tar file and unselect "one package in Odin" . On the boot in odin select the boot file of the .tar and run odin. Maybe that will help
Sent from my Galaxy5 using XDA App
Dude have u tryd using samsung kies it might detect it n let u do an emergancy firmware recovery or maybe (a verry unlikely maybe but still a maybe) it will detect the problem and provide u a solution hope this helps.
CurtisAndroid5 said:
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
Click to expand...
Click to collapse
Hi, had the very same issue as you. Odin crashed just few sec after start. What I did ; uninstalled everything (Odin & files comes with it, KIES). Then restart PC, go to Samsung.com and download latest KIES, when downloaded go to Tools and check for updates. Accept/run them, when done restart PC. Now, read the steps bellow, and see the attached picture.
1. Extract Odin v4.28 and Ops File.zip I5500XXXX.rar
2. Open Odin v4.28,
- Select OPS tab: EUROPA_v1.0.ops
- Make sure Auto Reboot & Protect OPS selected in Option tab
- get this I5500XFJPQ from samfirware.com ( for some strange reason only this package worked!), download, and unzipp to folder called GT-I5500. In to this folder place Odin and ops as well.
- Make sure One Package selected in Option tab
3. Turn off phone, remove battery for 5second, put it back
4. Hold "Volume Down, Center button & Power button" in the same time to enter Download Mode (yellow triangle)
5. Connect to PC with USB cable
6. When the data line and the phone connection is successful, com port shows yellow in Odin
7. Press Start on Odin
8. Waitin & Pray!
9. PASS, its done!
*Hard reset after flashing *2767*3855#
*Check ur Phone Info *#*#1234#*#*
Note: my i5500 was rooted, so if was yours then ok. When pressing buttons you must see an yellow triangle! If you don't see it don't try connect. Remove battery for 3-5 minutes and try again...
Thanks for the replies, I've got my 'broken' phone in its box on my wardrobe, Carphone Warehouse have ordered me a brand new G5 to replace mine, I should get that sometime next week, but I'm buying a HTC Wildfire S pretty soon anyway!
Thanks for your help, I'd rather keep my broken phone well, broke aha.
Have you tried flashing twrp recovery then using cf-autoroot?
Hi All,
I tried to flash my friends i9100 (it had arabic 2.3.4 firmware, but i didn't write down the exact firmware number), to I9100JPKI1 2.3.5 1 file update. But it gave "FAIL" result in ODIN. After that phone got stuck on Download screen. I removed battery and restarted the phone. And after it got stuck on the following screen (pic at the end of post)
I tried to flash it again by odin but it's not flashing (Attached pic of ODIN after unsuccessful flash below). Any ideas how to restore the phone?
it seems connectivity problem. Have you tried another USB or another USB cable?
Yes, tried different cables on different computers. The phone is booting with this phone-warning triangle-computer logo immediately. Even samsung logo is not coming before it.
Are you able to access recovery mode? If yes, try to do a full wipe.
EDIT: Try to Kill all process of Kies, and see if Odin recognize your phone
No, it's stuck on this screen. i can't put it in Download mode. Even if i start it: Volume Down+Home+Power this screen is coming.
ODIN can't recognize the phone.
Ouch, I see repartition and a PIT file, that usually means the phone is really dead; a job for the service centre.
Which guide did you use?
limon11 said:
Yes, tried different cables on different computers. The phone is booting with this phone-warning triangle-computer logo immediately. Even samsung logo is not coming before it.
Click to expand...
Click to collapse
Maybe some file are corrupted. Try to follow these steps:
[READ THIS] Got a Boot Loop? Don't post a New Thread!
[ROM+Guide]Official i9100 Firmwares KG, KH1/2/3/4, KI1/2/3/4/8, KJ1/2 Download
meranto said:
Ouch, I see repartition and a PIT file, that usually means the phone is really dead; a job for the service centre.
Which guide did you use?
Click to expand...
Click to collapse
On the first flashing (after which it became like this) i didn't do repartitioning and didn't use PIT file. Just selected PDA file.
meranto said:
Ouch, I see repartition and a PIT file, that usually means the phone is really dead; a job for the service centre.
Which guide did you use?
Click to expand...
Click to collapse
I didn't see that...maybe only service center can do this job
I tried to follow following guide: http://forum.xda-developers.com/showthread.php?t=1108499.
Did
1) Turn off your phone. Unplug it from your computer etc
2) Hold down home, power, and volume UP. This will enter recovery mode. If you are using CF-Root, you'll get CWM recovery. If not, you get stock recovery. It doesn't matter which appears.
BUT phone is not going into recovery mode.
limon11 said:
I tried to follow following guide: http://forum.xda-developers.com/showthread.php?t=1108499.
Did
1) Turn off your phone. Unplug it from your computer etc
2) Hold down home, power, and volume UP. This will enter recovery mode. If you are using CF-Root, you'll get CWM recovery. If not, you get stock recovery. It doesn't matter which appears.
BUT phone is not going into recovery mode.
Click to expand...
Click to collapse
I think that you need to leave the phone to Service Center.
The thing is that the phone was bought in another country, so there is no warranty in my country for it. That's why i'm searching for solution myself.
limon11 said:
The thing is that the phone was bought in another country, so there is no warranty in my country for it. That's why i'm searching for solution myself.
Click to expand...
Click to collapse
I had a problem weeks ago with my phone too. Tried a lot of things and nothing fix the problem. But when i was losing hope, i found the solution by myself.
My problem was only IMEI number and i recovered it. I think that your best choice is read a lot before take some decision. And the most recommended choice is leave the phone to Service center.
Good luck!
Maybe JIG will be useful to put the phone into DOWNLOAD mode?
P.S. : I am keeping going to Service Centre options as a last resort.
If there is any way to get Odin to recognize your phone there is still hope. Try to get into download mode in all possible ways, sometimes it seems lost but suddenly you get in. Make sure Kies is not running in the background.
If you cannot get into download mode, even with a jig, and Odin never recognizes the phone, it is a job for service centre or JTAG or something, but not yourself.
limon11 said:
Maybe JIG will be useful to put the phone into DOWNLOAD mode?
P.S. : I am keeping going to Service Centre options as a last resort.
Click to expand...
Click to collapse
JIG maybe work
OK. I made very big mistake in the begining. the phone model was i9100g and i flashed it with i9100 firmware. that's seems the cause of the hang.
limon11 said:
OK. I made very big mistake in the begining. the phone model was i9100g and i flashed it with i9100 firmware. that's seems the cause of the hang.
Click to expand...
Click to collapse
That messed up your phone dude.. Can you still put your phone into download mode?
Sent from my GT-I9100 using xda premium
Finally, Alhamdulillah, i solved my problem of i9100g flashed with i9100 firmware. First to go out from "phone - yellow label - computer" mark i flashed it with i9100g original kernel Kernel_I9100GDZKI1 from http://forum.xda-developers.com/showthread.php?t=1276105&page=3. after that it became possible to put the phone into download mode. after that i flashed it with ODIN USING PIT FILE FOR OMAP4 from the same forum and with i9100G new firmware. and that's all, phone is working again.
Hi everyone,
I brought a new galaxy s2 phone about 4 weeks ago and it has spent most of that time soft bricked since I tried to update it to the newest firmware, K14....
I am using windows 7 starter, 32bit. I have installed kies, uninstalled and re-installed kies, tried uninstalling kies and just using the drivers.
Recently I did a clean install of windows, installed kies, as more drivers seem to be recognized and downloaded odin v1.85. I restart the computer, start task manager end all processes that say kies, run odin as a administrator, put the tar file in pda, only auto reboot is selected. I then plug in the phone, in download mode, wait for yellow box and press start and the process only goes as far as boot.bin.
I have tried all of my usb ports and the only difference is the number of the modem installed driver and how far along odin gets. With two ports it only goes as far as setup connection which was as far as anything went before I re-installed windows. I have replaced the usb cable and made sure the phone battery is fully charged. The phone was put into usb debugging mode before it was bricked. I have attached a picture of what drivers get installed when I plug in the phone. The firmware I am attempting to flash is the uk 3 version off the firmware page of this website.
Please can somebody give me the solution it is driving me nuts!
Sorry for waffling but I figure you need to know what I've tried so that I don't waste anybodies time.
Thanks guys
Did you try a different stock rom? Did you try a different pc? Or if you want to, flash a CF-root kernel. Then boot in recovery and flash a rom of your choice.
The flashcounter will start and stock roms can't be flashed this way (at least as far as I know).
Is your phone a I9100 model?
I ask this to make sure you are trying to flash the correct firmware for your device.
Sent from my GT-I9100 using XDA App
Cookoospite said:
Hi everyone,
I brought a new galaxy s2 phone about 4 weeks ago and it has spent most of that time soft bricked since I tried to update it to the newest firmware, K14....
I am using windows 7 starter, 32bit. I have installed kies, uninstalled and re-installed kies, tried uninstalling kies and just using the drivers.
Recently I did a clean install of windows, installed kies, as more drivers seem to be recognized and downloaded odin v1.85. I restart the computer, start task manager end all processes that say kies, run odin as a administrator, put the tar file in pda, only auto reboot is selected. I then plug in the phone, in download mode, wait for yellow box and press start and the process only goes as far as boot.bin.
Possibility one bad firmware file or wrong file ,
Or not using Samsung USB cable .
jje
Click to expand...
Click to collapse
Hi Lenny,
Yh, i have tried it on my desktop which runs 7 home premium. Clean install with same results. Tried the K14 firmware a few times but that never got any further than setup connection. Don't understand the rest of your post sorry. Can you do a flash for dummies thing? And is there a firmware you would recommend trying?
@ aceofclubs -the box says i9100 and so does the sticker in the back.
@ JJEgan - the first cable I used was the one in the box and while the one I have replaced by ebay, they had good feedback. The K14 firmware was given to be by a user of the galaxy s2 that he had successfully flashed with.
Does the phone look to have installed correctly, the guy who gave me the firmware said he had abd appear in device manager, which I haven't got. Also after the phone is finished installing drivers if I click in the system tray, the green icon that shows devices that are present is not there and neither is the phone but if I go into device manager samsung composite device is.
Cookoospite said:
Hi Lenny,
The K14 firmware was given to be by a user of the galaxy s2 that he had successfully flashed with.
Does the phone look to have installed correctly, the guy who gave me the firmware said he had abd appear in device manager,
Better of following the instructions than second hand stuff .
Download firmware from stock rom thread no excuses of bad firmware then .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Click to expand...
Click to collapse
Thanks for the suggestion JJegan but I just tried another firmware from the link you provided above with no success, stopped at setup connection. What is abd and do I need it? Think I must be missing some drivers!
Cookoospite said:
Thanks for the suggestion JJegan but I just tried another firmware from the link you provided above with no success, stopped at setup connection. What is abd and do I need it? Think I must be missing some drivers!
Click to expand...
Click to collapse
No you dont need a ADB neccesarily for flashing. ADB (Android Debug Bridge) is a tool that comes with the Android SDK that allows you to control and interface with your Android device. Well do u have the phone specifications before bricking it, like Model No, Built, CSC, Kernal Etc.
First try to uninstall Kies and Install the latest version, so that you have the latest drivers.
Check the Intratech thread on Stock ROM ( http://forum.xda-developers.com/showthread.php?t=1075278) and download the correct rom.( I presume you have I9100 Intenational Version of S2). Open Odin 1.85, do not change any options, brownse and put the stock rom u downloaded into the PDA section and click on start button, you should be good.PM me if you have any issues.
The above didn't work. Here's what I got:
Cookoospite said:
Thanks for the suggestion JJegan but I just tried another firmware from the link you provided above with no success, stopped at setup connection. What is abd and do I need it? Think I must be missing some drivers!
Click to expand...
Click to collapse
AS you have the yellow box in Odin you have the drivers all the firmware in that link works .
run odin as a administrator, put the tar file in pda, only auto reboot is selected. I then plug in the phone, in download mode, wait for yellow box and press start
Lets do this the right way just to be sure . Open Odin put the tar file in PDA
go to download mode at first screen download mode on phone follow instruction ( vol up from memory ) after next screen connect Samsung USB cable to phone and PC .
jje
Thanks, think I've done that anyway but, just to check, what do you mean by next screen?
The screen when you are in download mode and press volume up.
Yh that is what I'm doing, thanks tho. Can someone please give me a reliable link to an older version of Odin to try? At the mo I am using v1.85, this the latest version?
Sent from my GT-I9100 using XDA App
Odin 1.3 here
Cookoospite said:
Yh that is what I'm doing, thanks tho. Can someone please give me a reliable link to an older version of Odin to try? At the mo I am using v1.85, this the latest version?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
So close! I plugged the phone in and got as far as cache with the green progress bar showing just the tiniest bit. Left it for over an hour but the bar didn't move at all! Encouraged I restarted the computer to try again only to find that now the computer and odin won't recognize the phone until I uninstall and reinstall kies and always hangs on cache. I restarted in the first place as the phone never shows in the system tray. Sorry to be a bore but have you any idea why everyone else can plug in and flash and my machines refuse to! I welcome any ideas you have. Thank you.
Instead of Odin, you could try Heimdall. Maybe that will work for you.
http://forum.xda-developers.com/showthread.php?t=1104826
Thanks Lenny. Don't know how to use it tho no boxes like on the tutorials I have watched in the latest version. Can you clue me in please?
Sent from my GT-I9100 using XDA App
Here is a guide, it should work the same for our phone.
http://forum.xda-developers.com/showthread.php?t=878686
Thanks. Have to wait a couple of days to try it now. Happy Christmas
Sent from my GT-I9100 using XDA App
hey hope everyone had a good christmas and new year. Still no joy, where do I get PIT files to flash with the newest version of heimdall to go with our firmware? The newest version won't let me add files until I enter a PIT. I tried version 1.1 but I couldn't get it to recognise a compatible device.
On the odin front: I thought I'd cracked it. It started flashing, took hours but I had half a green progress bar and then it just seem to freeze. Also this seems replicable a few times and then I get stuck at setup connection again. I then have to do a system restore to get it to flash to the furthest point again. Does this give anyone any clues? Or does anyone know of any heimdell packages I could try? And the long shot, any way of getting firmware on to an sd card and flashing that way when a phone is soft bricked?
Sorry if I'm annoying you but there has to a way round this. I brought a rooted one to use while this is sorted, love the phone but need to know I can update and be able to sort it out if things go wrong.
Thanks again for your help and suggestions.
Hello!
First I want to tell you that are new on this forum and wish you a Happy New Year!
I am the owner of a GT-I9100 Samsung S2 Galaxy a few months, was branded by Orange Romania.
Yesterday I wanted to make him ROOT indicated in the forum they have found.
Everything went well the first step, with Odin, after restarting my phone remained on the screen S2 Galaxy <Samsung GT-I9100> and below yellow triangle with an exclamation mark.
I went to step 2, .... and <Waiting SuperOneClick device> after 10 minutes nothing happened .... so remained.
I clicked on the window and he appeared in the top left corner, after the program name (Not Response), that something is stuck somewhere.
I tried to resume operations, but without succes.
Can anyone tell me how to flash it or how I can put a ROM you can use something?
All I can tell you is that Kies was the last version and the phone was updated daily by Kies. (Unfortunately not noted version)
You advised me to do?
What I have to say is that in some versions of ROM writing software gives me error and squares is red. (That in ODIN).
Thank you in advance.
Your best bet is to start again from the beginning. You can find branded and unbranded firmware here...
Unbranded firmware
Branded firmware
Flash one of them using Odin (as instructed in the thread where you download), but make sure that nothing associated with Kies is running. (Open task manager, look at processes and kill everything that begins with kies.)
Once your phone is working okay, to root just use this very simple method...
Easy Rooting Toolkit
First of all does your computer have the Samsung drivers installed and/or adb drivers?
If you want to root the easiest way is to flash a kernel, cf root is recommended for rooting you can flash this via odin.
This will give you Cwm recovery so you can flash roms via recovery on your phone.
Sent from my GT-P7510 using Tapatalk
nikzDHD said:
First of all does your computer have the Samsung drivers installed and/or adb drivers?
Click to expand...
Click to collapse
He's been updating it with Kies
x.shadowman.x1 said:
Hello!
Yesterday I wanted to make him ROOT indicated in the forum they have found.
Everything went well the first step, with Odin, after restarting my phone remained on the screen S2 Galaxy <Samsung GT-I9100> and below yellow triangle with an exclamation mark.
I went to step 2, .... and <Waiting SuperOneClick device> after 10 minutes nothing happened .... so remained.
Thats a very old method if you read the instructions its no longer in use .
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
Flash stock rom via ODIN.
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Click to expand...
Click to collapse
Guys ... do not laugh at me, but now another problem arose.
First I want to thank those who have answered me.
So ... let me tell you. Finally I managed to pass the problem occurred, but now appeared to me another. I managed to i9100XWKDD_i9100XXKDH_i9100OXXKDC_HOME.TAR satrec error and install the phone.
All well and good SWITCH only lasted a lot, about 15 minutes after the restart after installation.
Once started I did a hard reset.
At the start I have seen a lot of lines written in red so a lot of errors.
Finally they did not want to restart my phone, I only appear GT-I9100 Samsung Galaxy SII and NO yellow triangle.
Did not want to do anything. After about 10 minutes I decided to try again with Odin. Now it's surprise, the ODIN not want to recognize my phone ..... can not do anything with phone ODIN!!
When the download get in step (volume down + home + power) Were it says "current binary: OFFICIAL SAMSUNG" is this a problem? Before there was writing "binary power: CUSTOM"
Unfortunately the PC does not recognize the phone when the USB stick, I say it's not recognized.
What can I do?
Can I do anything with it at home? Or should it go on it for service?
What would I be able to attempt to revive it?
Once again thank you in advance.
x.shadowman.x1 said:
Guys ... do not laugh at me, but now another problem arose.
i9100XWKDD_i9100XXKDH_i9100OXXKDC_HOME.TAR satrec error and install the phone.
Thats very very old out of date firmware and out of date method .
When the download get in step (volume down + home + power) Were it says "current binary: OFFICIAL SAMSUNG" is this a problem? Before there was writing "binary power: CUSTOM"
Can I do anything with it at home? Or should it go on it for service?
What would I be able to attempt to revive it?
If its rooted then no warranty .
QUESTION
Can you get to either recovery mode or download mode .
Will ODIN show when in download mode and connected with Samsung usb cable a yellow connected bar top left .
jje
Click to expand...
Click to collapse
@ JJEgan-thank you.
version is old, but was the only one who can get me to install the phone to ODIN.
in ODIN, is not left anything yellow, all fields are empty.
is strange that neither you put your PC does not recognize USB cable in, it says USB DEVICE is not recognized.
I am desperate.
Fault of phone or USB drivers on PC .
Guess its a part flashed firmware f888 up phone .
jje
Hi!
It seems that the PC recognizes other devices when connected.
The only explanation is that something happened in the phone.
In order to reboot, I only appear in red script.
It seems only able to make phone to communicate with any PC.
The only way is to make micro SD card.
At the "Volume Up + HOME + POWER" gives me the opportunity to do reboot or update using the SD card.
Can anyone explain to me how to do? And we need that?
Thank you.
i was trying to flash ICS 4.0 firmware to my samsung s2 I9100G Malaysia just now... but failed..
then i try to unplugged it from my computer and pulling my battery out from my phone..
when i try to reboot my phone it shows up a black screen with a phone connecting to a computer with a yellow triangle warning sign between...
how can i quit this mode!! omg!!!
Hi there
Check your usb connections please, one of the most common and unmentioned problems with ODIN is that it doesnt like being connected through hubs or non usb2 ports, i failed with odin quite a few times, until i disconnected my phone from the usb hub and connected it directly to the pc usb2 port, everything was fine after that.
Odin doesnt usually fail, what files are you flashing, is the firmware a 1 file package or multiple files with a .pit file??
If its 1 file, make sure you untick repartition.
Odin is solid, i would ask you to go away and check all the above, use odin 1.83 which is the best version i found, then try again, also check your lead, sometimes cheap usb leads are designed for charging and not syncing.
Good luck
---------- Post added at 12:47 PM ---------- Previous post was at 12:45 PM ----------
also the black screen mode is because the flash failed, you need to re enter download mode, and reflash until you get a pass, if it fails again, check md5 sums or download a generic s2 firmware and try again, its not bricked dont worry, as long as you do it right it will be fine.
thank for ur info.
anyway to get the hell out of the black scren??..
i connot re-enter the download mode... keep stuck in the black screen with a phone connecting to a computer with a yellow triangle warning sign!..
Can u get into clockworkmod recovery?
Press Home+volume up+ power key until you get to cwm recovery.
And yes you probably connected your phone through a hub or usb1 port.
If nothing else works you'll need a jig to restart into download mode. Try and look for the jig thread on general sgs2 forum for free locations.
That's forced download mode I.E. it's forcing you to flash something. Get a stock rom from Samfirmware or Checkfus & flash it with Odin.
Absolutley these guys are right, even if your flash has failed you should still be able to enter download mode, are you sure you cant, VOLUME DOWN, MIDDLE BUTTON AND POWER BUTTON, keep them all held down and it will boot to DL Mode, every time mine got a fail i still got to dl mode no problem.
Failing that yer, get a jig, usually they come from singapore, so if you cant wait that long pop to an electronics store, buy the resistors you need and a micro usb plug and make one, i made one yesterday and it cost me £1.40 to make, although its a makeshift for emergencies, it will do until the one ive ordered arrives.
Keep trying dl mode, no reason to not get into it.
MistahBungle said:
That's forced download mode I.E. it's forcing you to flash something. Get a stock rom from Samfirmware or Checkfus & flash it with Odin.
Click to expand...
Click to collapse
^This.
Also, OP, make sure you are flashing an I9100G firmware, and NOT an I9100 firmware. Likely that was the cause of your predicament in the first place, as that is the common cause of this screen being reached.
That sounds like a brick software, I get some like this time ago
Sent from SGSII//CM9 >>xBlackDroid<<
tried to flash the phone from ODIN and failed, most probably he done it wrong. The only thing the phone does is displaying an icon in the middle of the screen with a phone and a PC and an exclamation point in between them. I can`t get it to enter in download mode (volume down+home+power) and I can`t start it eather. It just stays at that icon. Kies is not recognizing the phone although the drivers are installed. When I pluged the phone for the first time in the PC it automatically instaled 2 drivers and that was it. Is it bricked? I haven`t seen this before.
The phone is an SGS 2 model GT-I9100G, ssn I9100GGSMH.
I hav downloaded 2 official firmware, 2.3.6 and 4.0 .. all is Malaysia..
flash so many times and keep failing..
dlan1 said:
The only thing the phone does is displaying an icon in the middle of the screen with a phone and a PC and an exclamation point in between them. I can`t get it to enter in download mode (volume down+home+power) and I can`t start it eather. It just stays at that icon.
Click to expand...
Click to collapse
Stop ignoring the people in this thread who actually know what they're talking about. Your phone is already in download mode.
please share firmware SAMSUNG GALAXY S II I9100GGsmh
dlan1 said:
i was trying to flash ICS 4.0 firmware to my samsung s2 I9100G Malaysia just now... but failed..
then i try to unplugged it from my computer and pulling my battery out from my phone..
when i try to reboot my phone it shows up a black screen with a phone connecting to a computer with a yellow triangle warning sign between...
how can i quit this mode!! omg!!!
Click to expand...
Click to collapse
get ur phone in download mode and flash stock firmware it shud be fi9
This is already forced download mode. Read earlier posts.
Did you see this thread: :fingers-crossed:
http://forum.xda-developers.com/showthread.php?t=1457458
Why are you people replying to a thread/poster from 6 weeks ago ?
The most recent poster (Ciasing) seems to be after an I9100G stock rom.
That's happened to me too please check this , thank god the link really helped me http://www.youtube.com/watch?v=KPSBXC72rmg
ciasing said:
please share firmware SAMSUNG GALAXY S II I9100GGsmh
Click to expand...
Click to collapse
u can find it here
http://forum.xda-developers.com/showthread.php?t=1754158
or
www.samfirmware.com
or download the firmware using checkfus
oinkylicious said:
Stop ignoring the people in this thread who actually know what they're talking about. Your phone is already in download mode.
Click to expand...
Click to collapse
I have the same problem and if it was actually in download mode properly then why won't ODIN detect the device????????????????????
I am trying to get clockworkmod onto the device. And the phone does nothing else but show that screen no matter how many times I do button combos etc... Maybe you should stop ignoring the guy when he's saying IT ISN'T WORKING AFTER HE HAS TRIED THE STEPS THAT PEOPLE WHO "KNOW WHAT THEY ARE DOING" HAVE PROVIDED.
machv5 said:
I have the same problem and if it was actually in download mode properly then why won't ODIN detect the device????????????????????
I am trying to get clockworkmod onto the device. And the phone does nothing else but show that screen no matter how many times I do button combos etc... Maybe you should stop ignoring the guy when he's saying IT ISN'T WORKING AFTER HE HAS TRIED THE STEPS THAT PEOPLE WHO "KNOW WHAT THEY ARE DOING" HAVE PROVIDED.
Click to expand...
Click to collapse
Depends on what you have already tried flashing since you originally got into this mess in the first place.
If you started blindly flashing stuff for any which device, it's possible you have borked your device to the point where your PC will no longer detect it.
Say, if you tried flashing a Fascinate ROM or similar to a Vibrant.
I'm just guessing that's what happened, because you started this thread in the Fascinate forum.
The Fascinate and the Vibrant are two completely different models of phones. The Fascinate is the Verizon variant of the Galaxy S, and is a CDMA phone. You have a Telus version of the Vibrant, which is a GSM phone.
So if you flashed something out of the Fascinate forum to your SGH-T959D Vibrant, you likely caused this issue yourself. And why are you in the I9100 forum trying to solve your problem?
Go to the Vibrant forum for your problem with your Vibrant phone.
Use Odin
dlan1 said:
thank for ur info.
anyway to get the hell out of the black scren??..
i connot re-enter the download mode... keep stuck in the black screen with a phone connecting to a computer with a yellow triangle warning sign!..
Click to expand...
Click to collapse
dont worry.. i also encountered with the same problem.. connect ur phone as it is to the pc and open odin of latest version. and flash its stock rom using PDA.. the phone will come back to normal.:good: