Hi,
I really need help with my bricked Flyer.
I tried to install honeycomb on my Flyer followed the process described in the link below:
http://android.modaco.com/topic/345950-installing-honeycomb-on-your-flyer-the-complete-guide/
Now, I ended up with a working CM, new and UNLOCKED bootloader, and new radio, S-ON **but** device turns on to white HTC screen and stays on that state.
I tried to revert to genuine GB rom followed the process on this post:
http://forum.xda-developers.com/showthread.php?t=1257909
And now current device state is:
*** RELOCKED ***
FLYER PVT SHIP S-ON RL
HBOOT- 1.11.0006
MICROP- 0850
RADIO- 3821.08.00.26_M
eMMC-boot
I tried to RUU fastboot method using rom.img from RUU_Flyer_HC_S_HTC_WWE_3.10.405
And ended up with error 132 (signature issue)
I also tried to flash PG41IMG.zip (pulled out of RUU_Flyer_HC_S_HTC_WWE_3.10.405) using goldcard without success- same signature issue (wrong product ID)
Curent state- no ADB, no CM, only fast boot works...
I would appreciate any help getting back to a working Flyer.
Thanks!
motman said:
Hi,
I really need help with my bricked Flyer.
I tried to install honeycomb on my Flyer followed the process described in the link below:
http://android.modaco.com/topic/345950-installing-honeycomb-on-your-flyer-the-complete-guide/
Now, I ended up with a working CM, new and UNLOCKED bootloader, and new radio, S-ON **but** device turns on to white HTC screen and stays on that state.
I tried to revert to genuine GB rom followed the process on this post:
http://forum.xda-developers.com/showthread.php?t=1257909
And now current device state is:
*** RELOCKED ***
FLYER PVT SHIP S-ON RL
HBOOT- 1.11.0006
MICROP- 0850
RADIO- 3821.08.00.26_M
eMMC-boot
I tried to RUU fastboot method using rom.img from RUU_Flyer_HC_S_HTC_WWE_3.10.405
And ended up with error 132 (signature issue)
I also tried to flash PG41IMG.zip (pulled out of RUU_Flyer_HC_S_HTC_WWE_3.10.405) using goldcard without success- same signature issue (wrong product ID)
Curent state- no ADB, no CM, only fast boot works...
I would appreciate any help getting back to a working Flyer.
Thanks!
Click to expand...
Click to collapse
if you have RELOCKED, You can try your original PG41IMG.zip (GB) with Goldcard
Yeah, I made a goldcard but the problem is that the base version installed on my Fiyer is Wifi_1.36.1540.32 and I can not find this version's RUU file anyware... Am I scr**ed? or is there any way to get this RUU file?
motman said:
Yeah, I made a goldcard but the problem is that the base version installed on my Fiyer is Wifi_1.36.1540.32 and I can not find this version's RUU file anyware... Am I scr**ed? or is there any way to get this RUU file?
Click to expand...
Click to collapse
It seems you made your goldcard incorrect.
I created a new goldcard and confirmed that I made it correctly, copied 41IMG.zip from another WIFI rom but still no go... I'm getting CID incorrect error on HBOOT
motman said:
I created a new goldcard and confirmed that I made it correctly, copied 41IMG.zip from another WIFI rom but still no go... I'm getting CID incorrect error on HBOOT
Click to expand...
Click to collapse
have you branding Version? if yes: it can be image name is different. For example on my Flyer: IMG41DIAG.zip
No, this Flyer was purchased unbranded in BestBuy- US. I guess that the only free solution will be with 1.36.1540.32 RUU version which can not be found anywhere :-(
motman said:
No, this Flyer was purchased unbranded in BestBuy- US. I guess that the only free solution will be with 1.36.1540.32 RUU version which can not be found anywhere :-(
Click to expand...
Click to collapse
You can control your cid with
fastboot getvar cid
viera77 said:
You can control your cid with
fastboot getvar cid
Click to expand...
Click to collapse
Thanks!
I'll try fastboot getvar cid option next week and post my results.
OK, here are the results:
'fastboot getvar all' command:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.11.0006
(bootloader) version-baseband: 3821.08.00.26_M
(bootloader) version-cpld: None
(bootloader) version-microp: 0850
(bootloader) version-main: 1.36.1540.32
(bootloader) serialno: HT15JJN00515
(bootloader) imei: 35519**********
(bootloader) product: flyer
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG4140000
(bootloader) cidnum: BS_US001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3674mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 60a0efb2
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.031s
Now, running this command:
fastboot oem writecid 11111111
Gives me the following error:
(bootloader) [ERR] Command error !
OKAY [ 0.016s]
finished. total time: 0.016s
What should I do next?
I'm echoing your cry for help. I'm in EXACTLY the same position. SOMEONE PLEASE HELP!
Managed to upgrade to HoneyComb
I managed to unbrick my flyer by redo all HoneyComb process using the link in my first post.
All of this could not happen without using the unlock_code.bin file I originally received from HTC to unlock the bootloader again! I used 'fastboot flash unlocktoken Unlock_code.bin' command then flashed the new CM recovery menu then HC custom rom zip file via CM.
The only step I could not bypass is S-ON due to a newer Hboot version (1.11.0006) which is not supported by Revolutionary yet.
I can live with that although I'm not able to downgrade to stock rom, my CID is still BS_US001. I wish I knew how to revert to the older supported Hboot in order to S-OFF.
I hope that helps.
Related
LOOKS LIKE S-OFF FOR 1.54 HAS HAPPENED. NO NEED TO DOWNGRADE CHECK THE POST HERE
MODS Lock This One Up!!!
I was about to give up on s-off since I got the OTA update but there is hope.
I got s-off doing the following:
1.) Unlock your device via HTCDev
2.) Download and flash CWM Recovery
3.) Flash the stock nandroid for your phone...
a. TWRP Nandroid AT&T Thanks JEANRIVERA
b. TWRP Nandroid AT&T Thanks JEANRIVERA
c. TWRP Nandroid AT&T Thanks cschmitt​If any one has other links to other devices let me know... I think this will work on all of the variants.:laugh:
Please note that this nandroid was made with TWRP and may need to be restored with TWRP.
On a side note... The original nandroid that I had linked was also created with TWRP and as I was unable to locate the restore function in my TWRP I did restore with CWM.
4.) then relock your device
Code:
fastboot oem lock
5.) grab 1847-ruu-m7-ul-jb-50-cingular-12650212.exe here and run it... Thanks cschmitt
6.) goto the tutorial here... and follow the directions...
This has worked for me... and I hope this will help someone else. All the information came from other people, I just happened to put it in the right order.
If this did not work for you there are New instructions here... Thanks domohan
IT IS IMPORTANT TO DO ALL THE STEPS IN ORDER...
I take no responsibility for anything you do with this information.
If I forgot to mention your name specifically... I'm Sorry and Thanks!
If I helped you hit the thank you button.
I see, new hboot. Downgrading it is then. Interesting that they haven't forced htc to shut off the unlocking service.
worked as advertised
Thanks a lot. A process for sure but worked for me following the ATT OTA update to .15. Although, I went on to follow the guide at wonderhowto dot com for installing the ASOP Google Edition. Thanks again.
Yeah that was the update that got me ... I am really glad that it worked for someone else... :laugh:
I am having trouble flashing the nandroid. I have tried to both flash the zip as well as unpack it and try to do a restore. Any thoughts?
---------- Post added at 06:33 PM ---------- Previous post was at 05:38 PM ----------
Ok, I actually flashed this one http://forum.xda-developers.com/showthread.php?t=2252959
Then ran the .12 RUU and am now S-OFF. Thanks for this!
well i am glad you got that working... The way i did the nandroid was by extracting the zip to clockworkmod\backups ... then choosing restore... I had TWRP but could not find the restore Nandroid option.
The only way I see this actually working is that the RUU just checks the HBOOT version, and not the build date. Otherwise, the .12 RUU would fail to install because the OTA HBOOT has a newer build date.
If this is true, then all AT&T users better get S-OFF now (if they know what S-OFF does). I have a feeling the 4.2.2 update will come out with a newer HBOOT with a higher number. Then surely, any 4.1.2 RUU will not work.
In any case, it seems to be working for those of us who weren't paying attention and downloaded the OTA... But the message is still S-OFF now while you can, 'cause they will patch the thing eventually.
I was getting Error = -6 codes and this method worked perfectly for me! Thanks so much!
This did not work for my situation...
I had S-OFF, set my CID to 11111111 and installed the latest GE rom. I decided to go back to stock, and made the mistake of S locking without knowing that I could not go back on HBOOT 1.54. Now I'm S-ON with CID 11111111, HBOOT 1.54 and Radio 4A.18
I tried this fix... I get stuck on the RUU, it show sending... but after about 5min it errors out...
Is there any hope for my situation?
This was what in my RUU log...
<T171817><DEBUG><OUT>sending 'zip'... (1029872 KB) FAILED (data transfer failure (Too many links))</OUT>
i used this and it worked flawlessly for me, great looking out man. im now s-off with tampered removed
TabascoJoe said:
This did not work for my situation...
I had S-OFF, set my CID to 11111111 and installed the latest GE rom. I decided to go back to stock, and made the mistake of S locking without knowing that I could not go back on HBOOT 1.54. Now I'm S-ON with CID 11111111, HBOOT 1.54 and Radio 4A.18
I tried this fix... I get stuck on the RUU, it show sending... but after about 5min it errors out...
Is there any hope for my situation?
This was what in my RUU log...
<T171817><DEBUG><OUT>sending 'zip'... (1029872 KB) FAILED (data transfer failure (Too many links))</OUT>
Click to expand...
Click to collapse
I'm not totally sure...
1.) do you have unlock from htcdev?
2.) can you flash a recovery?
a. if so there is hope to get back to at least a working phone till a new exploit for 1.54 is found.
b. Are you sure you re-locked your phone...
Code:
fastboot oem lock
c. SUPER CID - (allows you to flash ANY ROM to the device regardless of the carrier. Just click RUU.EXE) So make sure the phone is locked and flash an older RUU. Then revone and you should be good to go my friend.
let me know if this works!
...and remember to hit the thank you button!
INeFFeCTiVE said:
I'm not totally sure...
1.) do you have unlock from htcdev?
2.) can you flash a recovery?
a. if so there is hope to get back to at least a working phone till a new exploit for 1.54 is found.
b. Are you sure you re-locked your phone...
Code:
fastboot oem lock
c. SUPER CID - (allows you to flash ANY ROM to the device regardless of the carrier. Just click RUU.EXE) So make sure the phone is locked and flash an older RUU. Then revone and you should be good to go my friend.
let me know if this works!
...and remember to hit the thank you button!
Click to expand...
Click to collapse
I have a working phone. I have an unlock from htcdev. i have locked it, i can flash roms and recovery in twrp.
Its when I try an RUU it get suck on sending.... and errors out
Could it be my Main Version? I used misc tool to try to get back to 1.26.502.10, but can never get it to write the last digit correctly. Here is my getvar output:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.18.3263.15
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.010
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3999mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-94cf81a8fd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I guess I was wrong on being SuperCID. Using the misctool what should I change my main version to, and how?
Thanks
Here are the steps I did to unlock bootloader, root and acquire s-off:
I went back to fully stock unrooted s-on to get the OTA just to b on the safe side. This is where I knew the update screwed up the current s-off method so I unlocked the bootloader using HTCDev. Then proceed to root and pushed the revone file to the appropriate folder location. I followed all the commands from revone up to where u Chmod 755 revone. After that since I already had root, I simply type su then proceeded with the s-off and unlock command. Removed tampered label and voila!!! Back in business with latest software.
Sent from my HTC One using xda premium
---------- Post added at 07:50 PM ---------- Previous post was at 07:48 PM ----------
I think what happened was the new update screwed up the motochopper temp root exploit and that's y I think u can't s-off with the updated software. But there is always a way...
Sent from my HTC One using xda premium
TabascoJoe said:
I have a working phone. I have an unlock from htcdev. i have locked it, i can flash roms and recovery in twrp.
Its when I try an RUU it get suck on sending.... and errors out
Could it be my Main Version? I used misc tool to try to get back to 1.26.502.10, but can never get it to write the last digit correctly. Here is my getvar output:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.18.3263.15
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.010
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3999mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-94cf81a8fd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I guess I was wrong on being SuperCID. Using the misctool what should I change my main version to, and how?
Thanks
Click to expand...
Click to collapse
You can't use the AT&T RUU because your HBOOT is higher than the one in the RUU. S-ON is preventing any older HBOOT to be flashed.
Hi guys, will this work on T-Mobile HTC ONE? I updated not knowing they blocked from s-off.
Thanx,
Vinny
It would certainly be worth a try. The hardware is the same, so I don't see why not... as long as your boot loader is 1.44.00000 (not sure on the amount of zero's) this should work.
I'm pretty sure there are nandroid images for TMO out there so give it a try.
vinny.1967 said:
Hi guys, will this work on T-Mobile HTC ONE? I updated not knowing they blocked from s-off.
Thanx,
Vinny
Click to expand...
Click to collapse
let me know if it's work with you
me_rashad said:
let me know if it's work with you
Click to expand...
Click to collapse
Hey me_rashad, it's a no go. I also flash tmobile nand still no go. from what i research on difference forum is because tmobile update did a patch to the 1.44 HBoot so i guess we have to wait till revone or monshine dev find the way.
vinny.1967 said:
Hey me_rashad, it's a no go. I also flash tmobile nand still no go. from what i research on difference forum is because tmobile update did a patch to the 1.44 HBoot so i guess we have to wait till revone or monshine dev find the way.
Click to expand...
Click to collapse
I did get the OTA too and having the same pesky error -6. The bootloader version still says 1.44.0000, how do we know if its patched or not? Shouldn't the version number increase? What is your version?
okay,
I've unlocked the bootloader, rooted it, it's s-on and installed cm11. After less than a day, I've decided to go back to stock. Unfortunately, because cm11 is kitkat 4.4 it seems I can't even use an ruu, as they'll only go to 4.3 (which it seems i can't use because with s-on, I can't downgrade firmwares).
I've used Twrp 2.6.3.3 for recovery.
i've tried to use moonshine and rum runner, but they both fail, presumably because i've got cm11 installed. Also, when I connect to the pc, it only comes up as a media player or camera (depending on the settings in cyanogenmod), I've got debugging on and i believe everything else I should have.
In device manager, it calls itself "My HTC", yet in utorrent "HTC Aria"
When running (in cmd) "adb devices" it shows my phone, but when I do "fastboot devices" nothing comes up.
i've tried installing htc drivers, but nothing seems to change it. Some have mentioned forcing drivers but I don't know where to get the specific htc one driver.
in the bootloader this is what comes up:
hboot 1.44
m7ul pvt ship s-on rh
radio 4A.12.3750.20
open dsp v31.120.274.0617
eMMC-boot
what are my next steps/options?
damiancds said:
okay,
I've unlocked the bootloader, rooted it, it's s-on and installed cm11. After less than a day, I've decided to go back to stock. Unfortunately, because cm11 is kitkat 4.4 it seems I can't even use an ruu, as they'll only go to 4.3 (which it seems i can't use because with s-on, I can't downgrade firmwares).
I've used Twrp 2.6.3.3 for recovery.
i've tried to use moonshine and rum runner, but they both fail, presumably because i've got cm11 installed. Also, when I connect to the pc, it only comes up as a media player or camera (depending on the settings in cyanogenmod), I've got debugging on and i believe everything else I should have.
In device manager, it calls itself "My HTC", yet in utorrent "HTC Aria"
When running (in cmd) "adb devices" it shows my phone, but when I do "fastboot devices" nothing comes up.
i've tried installing htc drivers, but nothing seems to change it. Some have mentioned forcing drivers but I don't know where to get the specific htc one driver.
in the bootloader this is what comes up:
hboot 1.44
m7ul pvt ship s-on rh
radio 4A.12.3750.20
open dsp v31.120.274.0617
eMMC-boot
what are my next steps/options?
Click to expand...
Click to collapse
cm 11 did'nt update your firmware
what's your results for fastboot getvar all
run it from the bootloader screen / fastboot usb (remove your serial no and iemi)
all it says is "< waiting for device >"
this leads me to believe there's a driver error?
Sorry, I'm an idiot
C:\OneDrivers_Fastboot\Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.17.3250.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.15
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4315mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.056s
damiancds said:
all it says is "< waiting for device >"
this leads me to believe there's a driver error?
Sorry, I'm an idiot
C:\OneDrivers_Fastboot\Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.17.3250.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.15
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4315mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.056s
Click to expand...
Click to collapse
this is the last AT&T RUU it will update you to android 4.3 >>
http://www.htc1guru.com/dld/ruu_m7_...3_10-38j-1157-04_release_334235_signed_2-exe/
if that link is slow you can get it directly from HTC here >>
http://www.htc.com/us/support/htc-one-att/news/
you'll have to relock your bootloader
fastboot oem lock
then run the RUU with your phone sitting at the fastboot usb screen
Worked beautifully. Thank You.
there's only two niggling things. when you pull down for your notifications, in the top right used to be settings, now it's quick tiles like cm11.
Also, in my computer, the device shows up as portable media player, where it used to just show up as htc one and an icon that looked like it. (from quick reading, it seems this is normal.)
Thanks again for all your help
damiancds said:
Worked beautifully. Thank You.
there's only two niggling things. when you pull down for your notifications, in the top right used to be settings, now it's quick tiles like cm11.
Also, in my computer, the device shows up as portable media player, where it used to just show up as htc one and an icon that looked like it. (from quick reading, it seems this is normal.)
Thanks again for all your help
Click to expand...
Click to collapse
yeah welcome to android 4.3 .. it's different, wait till you get sense 5.5 in the kitkat update
clsA said:
yeah welcome to android 4.3 .. it's different, wait till you get sense 5.5 in the kitkat update
Click to expand...
Click to collapse
I know now, a rough search turned up the same....
One last question,
I'm sticking with stock, but i want to root it, everything i've done has been unsuccessful, where before first time and it was done, I was reading the guide over here, http://forum.xda-developers.com/showthread.php?t=2273376&page=2 , and it mentions that I can't root a stock rom? that means I would need to grab one of the rooted ones then, correct? I know I've seen a link to them around here, but can't seem to find it, let alone which one I should use.
damiancds said:
I know now, a rough search turned up the same....
One last question,
I'm sticking with stock, but i want to root it, everything i've done has been unsuccessful, where before first time and it was done, I was reading the guide over here, http://forum.xda-developers.com/showthread.php?t=2273376&page=2 , and it mentions that I can't root a stock rom? that means I would need to grab one of the rooted ones then, correct? I know I've seen a link to them around here, but can't seem to find it, let alone which one I should use.
Click to expand...
Click to collapse
after running the RUU your starting from scratch
1.unlock bootloader at HTCDEV.com
2. Flash custom recovery I recommend TWRP 2.6.3.3
How to flash?
1) Download your recovery
2) Put it on your adb/fastboot folder
3) Rename it to recovery.img
4) Open a CMD/Teminal windows on adb folder
5) Put your phone in fastboot
6) Flash the recovery with the command:
fastboot flash recovery recovery.img
fastboot erase cache
fastboot reboot-bootloader
Click to expand...
Click to collapse
3. flash custom rom 3.17.502.3 Stock Rooted
That should do it if your Root needs updated
download and flash this same as a rom
http://download.chainfire.eu/372/SuperSU/UPDATE-SuperSU-v1.86.zip
i'd installed cm11 via installer but now i wanna go back to sense
i'd installed cm11 via cm installer but now i wanna go back to stock sense,sadly i couldnt find the suitable RUU for my device.Since im really new to this android system i dont have any ideas bout flashing or locking the devices,could u guys please help me out?
i'd tried turning S off with rumrunner but at the end i was struck on an error.
here are my devices details.
m7_U S on
Hboot 1.56
CID : htc__038
version : 4.20.707.7
THANKS.
Hello all, I've been using these forums for information frequently, but this is the first time I've run into trouble. I updated my AT&T HTC One to the GPE, but decided I wanted to go back to stock with the impending HTC Sense 5.5 update around the corner. I had gotten GPE via rumrunner and the methods at htc-one.wonderhowto.com (I can't post the direct link).
I had then reverted back to a rooted stock ROM, but it would not perform OTA updates. So, my next step was to get S-ON and re-lock the device. I accomplished those, but somehow I now have no OS - I can get into recovery (stock), but cannot perform anything from there. Factory resets and wipes do nothing for me. I have access to fastboot, and have attempted running various RUUs but all of them give me error code 155, which appears to be due to the wrong version. However, I have tried all of the AT&T US RUUs I can find, so I'm sort of at a loss there.
I thought maybe I could get unlocked again so that I could load TWRP again, but running the HTCDev unlocktoken command does nothing, other than tell me it was successful - it stays on the fastboot screen instead of showing the option to choose Yes/No to unlock.
So, after hours of attempts, I'm sort of stuck. Could anyone help point me in the right direction? By the way, my device reads TAMPERED and RELOCKED in the bootloader, and S-ON. Below is the output of my getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.22.3263.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.06.1540.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: XXXXXXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXXXXX
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4325mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bee46337
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.040s
Please remove serial number and imei from the report.
Sent from my HTC One using xda app-developers app
TopoX84 said:
Please remove serial number and imei from the report.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
I did just as you posted this, thanks!
codejunkie83 said:
Hello all, I've been using these forums for information frequently, but this is the first time I've run into trouble. I updated my AT&T HTC One to the GPE, but decided I wanted to go back to stock with the impending HTC Sense 5.5 update around the corner. I had gotten GPE via rumrunner and the methods at htc-one.wonderhowto.com (I can't post the direct link).
I had then reverted back to a rooted stock ROM, but it would not perform OTA updates. So, my next step was to get S-ON and re-lock the device. I accomplished those, but somehow I now have no OS - I can get into recovery (stock), but cannot perform anything from there. Factory resets and wipes do nothing for me. I have access to fastboot, and have attempted running various RUUs but all of them give me error code 155, which appears to be due to the wrong version. However, I have tried all of the AT&T US RUUs I can find, so I'm sort of at a loss there.
I thought maybe I could get unlocked again so that I could load TWRP again, but running the HTCDev unlocktoken command does nothing, other than tell me it was successful - it stays on the fastboot screen instead of showing the option to choose Yes/No to unlock.
So, after hours of attempts, I'm sort of stuck. Could anyone help point me in the right direction? By the way, my device reads TAMPERED and RELOCKED in the bootloader, and S-ON. Below is the output of my getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.22.3263.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.06.1540.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: XXXXXXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXXXXX
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4325mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bee46337
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.040s
Click to expand...
Click to collapse
Did you try ruu ?
RUU M7 UL JB 50 Cingular US 1.26.502.15 Radio 4A.17.3250.20 10.40.1150.04 Release 326691 Signed 2
http://www.htc1guru.com/dld/ruu_m7_...13_10-33-1150-01_release_318450_signed_2-exe/
or you could try this which is supposed to be the latest version that at&t has gotten out
http://androidromupdate.com/2013/10/09/att-htc-one-official-4-3-ota-update-stock-ruu-3175023/
Sent from my HTC One using xda app-developers app
TopoX84 said:
Did you try ruu ?
RUU M7 UL JB 50 Cingular US 1.26.502.15 Radio 4A.17.3250.20 10.40.1150.04 Release 326691 Signed 2
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Yes, I tried all of the Cingular ones on that page, to no avail. They all fail with the 155 error code.
EDIT: I also tried that latest AT&T version from androidromupdate, but it failed the same
codejunkie83 said:
Yes, I tried all of the Cingular ones on that page, to no avail. They all fail with the 155 error code.
Click to expand...
Click to collapse
http://androidforums.com/incredible...or-155-using-htc-rom-utility.html#post4767526
http://forum.xda-developers.com/showthread.php?t=2257921
Okay, seems like I've followed all of those steps. I ran fastboot oem lock, but each time I try the RUU I get the 155 message. I had just installed the latest HTC drivers last week, as that was when I went to the GPE. I'm using the same USB port that I had been using then, so no differences there.
Thank you for your responses - if you need any more information I'll be glad to give it.
TopoX84 said:
http://androidforums.com/incredible...or-155-using-htc-rom-utility.html#post4767526
http://forum.xda-developers.com/showthread.php?t=2257921
Click to expand...
Click to collapse
Okay, so one thing that I have noticed - my main versions seems to be X.XX.1540.X, which as best I can tell is the US Dev Edition. However, my CID is CWS_001, which should have X.XX.502.X as the main version. Unfortunately, I think the conflict here is causing my RUUs to fail. Any suggestions?
So, after a long night and morning of fighting with this, I've concluded that I'm completely hosed. Here is how I stand at this time:
My CID is correct, CWS__001, which matches my carrier (AT&T)
My OS version, however, is 4.06.1540.2. This marks it as being a developer edition.
There does not exist an RUU for the OS I have currently. Also, if one did exist, I'm not certain that it would work, as that would require my CID to be different (not sure on that last bit)
All AT&T RUUs fail - this is due to low main version.
I do not have access to Android at all, only bootloader and fastboot.
I am S-ON
I am RELOCKED/TAMPERED
Because of these, I cannot flash a custom recovery to be able to load a new system of ANY version.
Because I can only access bootloader, I cannot achieve S-OFF.
And the final nail, HTC Dev unlock feature does not work. It says it is successful, but the splash screen is never displayed, and I receive the message that the splash screen could not load on my next fastboot command (no matter what command it is)
So, from this criteria, I think I'm stuck with an expensive piece of dead technology. I'm posting all of this information in hopes that someone else may get stuck in the same manner and have a miracle cure.
codejunkie83 said:
So, after a long night and morning of fighting with this, I've concluded that I'm completely hosed. Here is how I stand at this time:
My CID is correct, CWS__001, which matches my carrier (AT&T)
My OS version, however, is 4.06.1540.2. This marks it as being a developer edition.
There does not exist an RUU for the OS I have currently. Also, if one did exist, I'm not certain that it would work, as that would require my CID to be different (not sure on that last bit)
All AT&T RUUs fail - this is due to low main version.
I do not have access to Android at all, only bootloader and fastboot.
I am S-ON
I am RELOCKED/TAMPERED
Because of these, I cannot flash a custom recovery to be able to load a new system of ANY version.
Because I can only access bootloader, I cannot achieve S-OFF.
And the final nail, HTC Dev unlock feature does not work. It says it is successful, but the splash screen is never displayed, and I receive the message that the splash screen could not load on my next fastboot command (no matter what command it is)
So, from this criteria, I think I'm stuck with an expensive piece of dead technology. I'm posting all of this information in hopes that someone else may get stuck in the same manner and have a miracle cure.
Click to expand...
Click to collapse
Have you worked through this article??
http://forum.xda-developers.com/showthread.php?t=2358738
mb_guy said:
Have you worked through this article??
http://forum.xda-developers.com/showthread.php?t=2358738
Click to expand...
Click to collapse
I've tried - how would I go about restoring the stock rom/recovery? Just flash the individual images from that zip? Also, would I need to do the X.XX.502.X version (my carrier), or the X.XX.1540.X version (the currently loaded firmware)?
EDIT: No dice. I tried both, but continue to receive the message that the signature verify is failing.
codejunkie83 said:
I've tried - how would I go about restoring the stock rom/recovery? Just flash the individual images from that zip? Also, would I need to do the X.XX.502.X version (my carrier), or the X.XX.1540.X version (the currently loaded firmware)?
EDIT: No dice. I tried both, but continue to receive the message that the signature verify is failing.
Click to expand...
Click to collapse
I think your issue may be that you went back to S-on before going to stock and now firmware is wrong. I would follow the article to regain s-off then you can likely move ahead. There are also several articles saying going to s-on after being s-off can cause issues.
mb_guy said:
I think your issue may be that you went back to S-on before going to stock and now firmware is wrong. I would follow the article to regain s-off then you can likely move ahead. There are also several articles saying going to s-on after being s-off can cause issues.
Click to expand...
Click to collapse
The problem is that I cannot access my phone's storage to push revone, or to use rumrunner. I cannot unlock the device because unlocktoken does not work - it applies the token, but nothing happens.
I wonder - can I flash the splash screen that it is missing? I think it's due to me missing the piece where it asks me to confirm I want to unlock the phone.
codejunkie83 said:
The problem is that I cannot access my phone's storage to push revone, or to use rumrunner. I cannot unlock the device because unlocktoken does not work - it applies the token, but nothing happens.
I wonder - can I flash the splash screen that it is missing? I think it's due to me missing the piece where it asks me to confirm I want to unlock the phone.
Click to expand...
Click to collapse
I would try posting here in the main htc one forum
http://forum.xda-developers.com/htc-one/help
Lots of smart guys hang out there.
BTW: have you tried "fastboot oem unlock" again
mb_guy said:
I would try posting here in the main htc one forum
http://forum.xda-developers.com/htc-one/help
Lots of smart guys hang out there.
Click to expand...
Click to collapse
Thanks, will do!
Trying to get an RUU to run to update the HTC One M7 from T-Mobile. I've tried both the 3.24 that the phone has, and the 4.xx new one from the Original Android Dev forum. Both of them fail. 3.xx when trying to verify information, and 4.xx after step 1/5 pushing boot. 4.xx gives error 171 USB issue. I've got the drivers installed, as well as ADB and Fastboot. It connects to the phone and the RUU file reboots it, but instead of going to bootloader it goes to a black screen with HTC in silver, then the RUU on the computer fails.
Any ideas what I might be doing wrong? I have fastboot/bootloader access, but can't boot past the HTC O1ne screen.
Edit: I GOT IT!!! If you're in the same spot as me, make sure to put the RUU in your ADB directory. It wasn't working for me, moved it, worked like a charm.
detox702 said:
Trying to get an RUU to run to update the HTC One M7 from T-Mobile. I've tried both the 3.24 that the phone has, and the 4.xx new one from the Original Android Dev forum. Both of them fail. 3.xx when trying to verify information, and 4.xx after step 1/5 pushing boot. 4.xx gives error 171 USB issue. I've got the drivers installed, as well as ADB and Fastboot. It connects to the phone and the RUU file reboots it, but instead of going to bootloader it goes to a black screen with HTC in silver, then the RUU on the computer fails.
Any ideas what I might be doing wrong? I have fastboot/bootloader access, but can't boot past the HTC O1ne screen.
Click to expand...
Click to collapse
Are you S-On or S-Off? Do you have stock recovery? Is your MID and CID the same as the RUU? Is your bootloader "Locked"? Do you have the stock hboot for the RUU you are trying to run? The hboot has to be the same or lower than hboot in the RUU!
majmoz said:
Are you S-On or S-Off? Do you have stock recovery? Is your MID and CID the same as the RUU? Is your bootloader "Locked"? Do you have the stock hboot for the RUU you are trying to run? The hboot has to be the same or lower than hboot in the RUU!
Click to expand...
Click to collapse
Everything is stock. The co-worker never bothered with rooting/etc. S-On. T-Mo phone using a T-Mo RUU. Locked bootloader. Pretty sure the hboot is the same as well.
detox702 said:
Everything is stock. The co-worker never bothered with rooting/etc. S-On. T-Mo phone using a T-Mo RUU. Locked bootloader. Pretty sure the hboot is the same as well.
Click to expand...
Click to collapse
Reboot to bootloader (FASTBOOT USB), then run the command: fastboot getvar all This will tell you the id information about the phone. There may be some light shed on the status of the phone.
majmoz said:
Reboot to bootloader (FASTBOOT USB), then run the command: fastboot getvar all This will tell you the id information about the phone. There may be some light shed on the status of the phone.
Click to expand...
Click to collapse
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.03
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.24.531.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 4312mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-412e361e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.046s
C:\adb>
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
C:\adb>[/QUOTE]
First of all please remove the serialno and imei from your original post. Nothing looks out of the order. Could the RUU be corrupt? Check the MD5 checksum just to be sure. Or download another RUU from a different site. I have used this site's RUU in the past.
majmoz said:
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
C:\adb>
Click to expand...
Click to collapse
First of all please remove the serialno and imei from your original post. Nothing looks out of the order. Could the RUU be corrupt? Check the MD5 checksum just to be sure. Or download another RUU from a different site. I have used this site's RUU in the past.[/QUOTE]
I apparently got it. Moved the file from C:\Downloads to C:\adb, ran it, success. Thanks for the pointers, though.
Hey guys I tried to root my phone a while back and something happened and now its stuck on the HTC logo. I can still access bootloader alright though. This is what my phone says while in bootloader:
***TAMPERED***
***UNLOCKED***
ZARA_UL PVT SHIPS S-ON RL
HBOOT-2.22.0000
RADIO-1.26.40E.00.14
OpenDSP-v18.2.0268.0925
OS-2.14.661.3
eMMC-boot 1024MB
FEB 26 2014 12:27:49.0
how can I get out of it ?
c:\Fastboot>fastboot getvar all
< waiting for any device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.22.0000
(bootloader) version-baseband: 1.26.40e.00.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.14.661.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid:
(bootloader) product: zara_ul
(bootloader) platform: HBOOT-8930
(bootloader) modelid: 0P4E23000
(bootloader) cidnum: TELUS001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4255mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-ae8bbb39
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Looks like you just need to try relocking the bootloader
Code:
fastboot oem lock
That will be the fastboot command you use.
MeniscusKing said:
Looks like you just need to try relocking the bootloader
Code:
fastboot oem lock
That will be the fastboot command you use.
Click to expand...
Click to collapse
I tried this maneuver to install the original ruu like indicated in this topic : http://forum.xda-developers.com/desire-601/general/collection-kitkat-ruu-t3228817 but unfortunately there's no ruu available for my version (2.14.661.3) and as my phone is S-ON I cannot downgrade or flash a different ruu.
Also I tried to restore a rom by twrp using this methode : http://forum.xda-developers.com/showpost.php?p=55220726&postcount=2 but it failed too.
Now I dunno if any custom rom for zara ul can be installed with S-ON, it seems the last hope
Nexting said:
I tried this maneuver to install the original ruu like indicated in this topic : http://forum.xda-developers.com/desire-601/general/collection-kitkat-ruu-t3228817 but unfortunately there's no ruu available for my version (2.14.661.3) and as my phone is S-ON I cannot downgrade or flash a different ruu.
Also I tried to restore a rom by twrp using this methode : http://forum.xda-developers.com/showpost.php?p=55220726&postcount=2 but it failed too.
Now I dunno if any custom rom for zara ul can be installed with S-ON, it seems the last hope
Click to expand...
Click to collapse
Have you tried installing this using TWRP?
I've used this one before just to have root and it's Zara UL
MeniscusKing said:
Have you tried installing this using TWRP?
I've used this one before just to have root and it's Zara UL
Click to expand...
Click to collapse
I finally get out of this by installing the same stock wit PhilZ Touch, although I guess the installation of STOCK_ODEX_ROOT_HTC_ZARA_UL_601_2.14.1401.86_v.1.0.1.zip before using TWRP was necessary for me
Now I got S-OFF using rumrunner and a new RUU moving to supercid :good:
Thank's for your help
Nexting said:
I tried this maneuver to install the original ruu like indicated in this topic : http://forum.xda-developers.com/desire-601/general/collection-kitkat-ruu-t3228817 but unfortunately there's no ruu available for my version (2.14.661.3) and as my phone is S-ON I cannot downgrade or flash a different ruu.
Also I tried to restore a rom by twrp using this methode : http://forum.xda-developers.com/showpost.php?p=55220726&postcount=2 but it failed too.
Now I dunno if any custom rom for zara ul can be installed with S-ON, it seems the last hope [/Q]
Have you by any chance managed to get S-OFF while your phone was bricked?
Click to expand...
Click to collapse
I need a rom 2.15.557.3 Zara_cl
hey! I need a rom 2.15.557.3 Zara_cl
But I can not find it on the internet! Can someone please upload it? My zara_cl is without OS, S-ON and I can not flash any other.