Hello
I have searched the forum but couldn't find anything on freezing on 3.14 ROM. I upgraded 6 months ago and so far everything was fine. no problems at all.
Since yesterday the touch doesn't respond to anything so i removed the battery and restarted the device. and it worked fine but it keeps doing this. I am thinking of reloading the 3.14 ROM but wasn't sure at the moment. as i want to backup the device.
Apprivcate if someone can come back to me.
Also any backup tools recommended, Like Microsoft Myphone ( which is finished now:-( )
Thank You
I use spb backup. It works GREAT! I can load SPB mobile shell get it how i want it..backup....load CHT get it how i want it...backup... and so on..and on.. lol. It can do a COMPLETE backup of EVERYTHING
I have re-loaded the 3.14 ROM and everything is working fine. Used pimbackup to backup my test message and restored someone them.
Will try SPB backup and let me now
Thank You
Hi Ntop,
I've installed Android for 6 month, now my display does not work (hw problem, I've just try to install other ROM)
Now I must send my phone for warranty, but I can't download official ROM on htc site.
Can you send me a link to download 3.14 ROM ?
Thankyou very much,
Nicola
Nicola76b
The direct link is bleow
East Europe: (WWE_EastEurope) 3.14.479.2 - Direct
http://94.136.51.200/download/RomCode/\HTC HD2/RUU_Leo_S_HTC_WWE_EastEurope_3.14.479.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
After upgradeing the ROM, please make sure that you do a hard reset.
If your hardware is from T mobile, orange, ect... than you would need to send it back with there ROM.
Read the T & C on the warrenty
Thanks
THANK YOUUUUUUUUUUUUUUUUUU !!!
Now I read:
R: 2.15.50.4
G 15.42.50.11U
D 3.14.04666
and display still not working...
I, think, when I bought HTC, it was installed
SPL-1.66.000 XE,
now I read
SPL-2.08.HSPL
Must I downgrade it (how?) or it isn't important?
In your opinion, should I do something other before send cell for warranty?
THANKY-YOU very much (another time)
Nicola
It depends who your warranty is with?
Some warranty company don't care about what ROM you have but some do.
That's the question you need to ask or see your warranty terms
Thanks
nicola
TIM.
I don't know where search this informations (tim buisness, it is big company so I haven't direct contact)
I think I will try... fingers crossed :-|
Nicola
Send you a PM
Thanks
Found a solution
It was the rom. Re-flash and now its working.
Thank you
Sent from my GT-I9100 using XDA App
Related
Earlier, I installed unofficial T-Mobile 1.6 rom on my i-mate. I just recenlty tried installing the official i-mate update and there is a country code. I don't have the old rom to revert to. Can anyone help. I know I would have to at the least get a copy of the old rom and then install it into the i-mate. Again, since I don't have a backup of the old one, I would need info on how to get one first.
The T-Mobile unofficial one works fine. I just wanted to go back to always on gprs etc. that the i-mate update has. If not, I guess I will have to wait until the rom kitchen is up and running for this unit. :lol:
Re: Official i-mate rom won't install after installing t-mob
jonburge said:
Earlier, I installed unofficial T-Mobile 1.6 rom on my i-mate. I just recenlty tried installing the official i-mate update and there is a country code. I don't have the old rom to revert to. Can anyone help. I know I would have to at the least get a copy of the old rom and then install it into the i-mate. Again, since I don't have a backup of the old one, I would need info on how to get one first.
The T-Mobile unofficial one works fine. I just wanted to go back to always on gprs etc. that the i-mate update has. If not, I guess I will have to wait until the rom kitchen is up and running for this unit. :lol:
Click to expand...
Click to collapse
I think you better try it using bootloader way, because t-mobile protect it's update, it happen in XDAI if you update your XDA to 4.16 and you want to go back to 4.11 then you have to update it using bootloader to be able to go back from the previous one 4.11 8) hope this help you...opps correction please there is no bootloader on XDA II, there is bootloader but in different way, I think if you copy your old nbf to sd using xdatools and go to bootloader by using power+anydirection+ reset it will ask to download the nbf to you device... hmmm if this doesn't work you have to look for another way.
T-Mobile 1.60 BUGGY Rom - Want to go back to iMate ROM
Folks,
I'm in the same position - Can someone please outline the success they've had going back from the T-Mobile 1.60 ROM to Imate ROM 1.5283??
Any thoughts would be great... (I'm guessing the boot loader using an SD card may work but would love to hear of any new tricks that people have learned on this
Cheers
Andy
I'll try to help.
Where can the ROM be downloaded, so I can have a look at it.
Jos
T-Mobile Back to iMate ROM
Thanks
I've uploaded the new iMate ROM image to:
http://www.c1au.com/iMatePDAROMS/ruu15283.zip
The somewhat flakey T-Mobile 1.6.006 ROM (which I'm trying to get away from is at
http://www.c1au.com/iMatePDAROMS/TMobile160.zip
Of course, with the different operator / country codes, it's not just a matter of running the .EXE - It'll need to involve the boot loader of a little hex editing of the header, I'm guessing (just guessing?!)
The new iMate ROM is meant to be the best bet around at the moment and my device is an iMate in the first place. The only reason why I installed the T-Mobile one was to get the Bluetooth GPS fix (which works well) - BUT so many other things aren't as stable!!
The new iMate ROM is meant to have the BT GPS fix as well.
Any help, much appreciated!
Cheers
Andy
Re: T-Mobile Back to iMate ROM
acurtis007 said:
Thanks
Of course, with the different operator / country codes, it's not just a matter of running the .EXE - It'll need to involve the boot loader of a little hex editing of the header, I'm guessing (just guessing?!)
Click to expand...
Click to collapse
That's correct, you need to mod it.
I'll make a procedure for it.
Jos
THANKS!
You're a champion!
Thanks very much..
It sounds like there's a few people that'll thank you!
The other posts on the subject aren't too clear at this point - So it'll be great to clear up the issue for the iMate / XDA II.
All the best - Have a great weekend.
Andy
OK, made some time to create a batch file to upgrade.
Works only for upgrade from T-Mobile 1.60.06 NL to I-mate 1.53.82.
1. Download the ROM image ruu15283.zip from the site in this posting
2. Unzip the file with Winzip
3. You now get a file called ruu15283wwwe_cdl.exe
3. Extract this file with Winzip to a new folder
4. Extract the attached file to the same folder
5. Start the conversion and upgrade by double-clicking convert.bat
Since I'm out till Sunday, I can't check my mail to respond to problems.
Enjoy!
Can the first person brave enough to try this please confirm success.
IT WORKS!!
Jes - You're a scholar and a gentleman!!
And a *(&(&( good programmer
IT WORKED!
Thanks a million!
Let me know how to send you virtual beers or whatever
(or if you need a hand with anything - Please let me know!)
Cheers
Andy
Nah, I'm not a good programmer, I just know how to write bachfiles and how to combine things to get the disered result.
Thanks has to go to Isme. He knows a lot about the internal working of the XDA II, the ROMS and the bootloader process.
He wrote the great tool used to change the file headers, so you can update your machine with a ROM of a different brand.
He's a good programmer!
If somebody needs a mod to upgrade from another ROM version, please let me know.
And if you want to do something back, please donate to the people who keep this nice forum up and running.
It worked. For those who want to get back onto the official path from unofficial t-mobile this is an automated way to do it. Thanks...Jon
Backing Up XDA2 ROM+CE
I'm a new XDA2 iMate user, want to back up my ROM+CE before I screw things up. I did this on my XDA1 (power + software reset, then press contact button I think). Anyway, I always had my ROM+CE backed up to a 64M SD card ... just in case.
I've searched these forums for such a procedure for XDA2 ... no luck.
What is the process, if any, to backup the XDA2's ROM+CE image to SD card?
Appreciate any help,
Craig
I think it's possible with the xda2dmp tool, but you better ask Itsme, he wrote it.
You can find it on this site: http://www.xs4all.nl/~itsme/projects/xda/xda-ii.html
PHoto contacts wont work
I have an imate and i just upgraded it with the new rom, but now i have a problem that the photo contacts wont work... Is there a way i can downgrade to an older version of rom. I use to rely alot on the photo contacts.. anyone else have the same problem?? thank you
Installing i-mate ROM after T-Mobile's
Gentlemen ,
I did the same (install T-mobile ROM on an imate ) and I want to install the imate ROM update. I am not sure about the T-mobile ROM , but when I boot it displays the following :
R 1.06.01
G 1337.16
D 1.60.00WWE
Kindly advsie if the above mentioned patch work in my case .
Appreciate you kind advice !
Thanks!
Should work.
Just try it out. If it's not ok, you get country error when you try to upgrade.
Jos
Hi Jos ,
I tried it and it WORKS!!!!!!!!!! You are a brilliant guy !!!
I owe you one!!
My friend wants to install the T-Mobile Update because the windows CE version on the T-mobile ROM is newer than that of the imate. Any magic patches that can be done.
Note -> Please tell me of how can I be of any help to you in return for your support
All the best
If you want to do something back, please donate to this forum to keep it up and running without advertisements or banners (just click Donate Money on top of this page).
This is how to upgrade:
Works only for upgrade from i-mate to T-Mobile 1.60.06 NL.
1. Download the T-Mobile ROM image from http://www.xda-developers.com/incoming/rom160wwe/
2. Extract this file with Winzip to a new folder
3. Extract the attached file to the same folder
4. Start the conversion and upgrade by double-clicking convert.bat
Let me know if it works.
Grtz,
Jos
Difference between i-mate 1.52.00WWE ROM and i-mate 1.53.82
Can anybody outline the differences between the 1.52.00 and the 1.53.82 official i-mate ROMs?
I'm trying to ascertain whether I have sufficient incentive to upgrade (given the "If it ain't broke, don't fix it" mentality I subscribe to in my old age!).
Sufficient incentive might be;
:arrow: Faster GPRS
:arrow: Improved battery life
:arrow: Improved all-round performance.
Thanks guys.
Codenix
Just upgraded to i-mate from much-loved XDA!
first i want to excuse me for my bad english
ok since 1week i have htc hermes tytn and i'm very, very satisfied with it. but i saw, that my rom is old and slow (1.18.255.3 07/22/06 with 1.03.03.10 radio and 1.18.255.106 extrom). i saw already the 1.35.255.2 rom, but i'm confused, because it's for south africa.... i live in Bulgaria and i'm not sure, will the device run, after the flash? problems?
i want you to explain or give me links to understand how to flash the rom. i don't know what the bootloader ist (maybe something for the startup of the device ) and the CID unlocker.... please help me, this is my first WM phone (i had before symbian)
plese tell me step by step, how to flash the rom without problems...
i'll be very, very grateful!!!
10x!
p.s. i can't understand why the avi files played so badly (stutters). my old phone (symbian) played them great and now... i hope, that the new rom will fix this
terzer said:
first i want to excuse me for my bad english
ok since 1week i have htc hermes tytn and i'm very, very satisfied with it. but i saw, that my rom is old and slow (1.18.255.3 07/22/06 with 1.03.03.10 radio and 1.18.255.106 extrom). i saw already the 1.35.255.2 rom, but i'm confused, because it's for south africa.... i live in Bulgaria and i'm not sure, will the device run, after the flash? problems?
i want you to explain or give me links to understand how to flash the rom. i don't know what the bootloader ist (maybe something for the startup of the device ) and the CID unlocker.... please help me, this is my first WM phone (i had before symbian)
plese tell me step by step, how to flash the rom without problems...
i'll be very, very grateful!!!
10x!
p.s. i can't understand why the avi files played so badly (stutters). my old phone (symbian) played them great and now... i hope, that the new rom will fix this
Click to expand...
Click to collapse
i recommend you to read the wiki first as it has all the info you need to start with. you'll find the answers to most of the questions you asked here. you can also search for the threads on that rom from south africa and the audio issues you mentioned.
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
10x i will read it carefully and if i have more questions or problems i'll write here!
10x a lot!
terzer said:
10x i will read it carefully and if i have more questions or problems i'll write here!
10x a lot!
Click to expand...
Click to collapse
great well come on board to wm5 arena!
10x, 10x, 10x!!! i successfully flashed the rom and works great!!!
one question: are they backup programs to save all my data (with settings and files) to the pc, because active sync saves only my document folder and i have to install all applications again?
thanks a lot!!!
terzer said:
10x, 10x, 10x!!! i successfully flashed the rom and works great!!!
one question: are they backup programs to save all my data (with settings and files) to the pc, because active sync saves only my document folder and i have to install all applications again?
thanks a lot!!!
Click to expand...
Click to collapse
A ROM upgrade may change the registary etc and restoring applications from a previous ROM is not recommended. However you can purchase 3rd party applications to backup files etc IE Sprite Backup there are a couple of others mentioned here in the forums.
As mentioned earlier Welcome Aboard!
10x, sorry but i have one more question
i want to unlock extrom (i have unlocked the past rom) but now i can't. i tryed all registry hacks and i can't unlock it. its unhidden, but not unlocked.
10x!
RUU_Hermes_QTEK_FRA_2.11.256.1_102_6275_1.38.00.10_108_Ship
http://www.smart-phones.be/
I'm thinking It's WM5 AKU 3.3.1. but i must go ....
Hello,
Can you please upload it on rapidshare or similar.
My IMEI is not accepted on smart-phone site.
Thanks,
Regards
Same for me : my IMEI is not accepted ...
If somebody could upload the file ...
I hope I'm not breaking any rules...
Here it is:
Code:
RUU_Hermes_QTEK_FRA_2.11.256.1_102_6275_1.38.00.10_108_Ship.exe
http://rapidshare.com/files/28220588/hermes_fr.rar
hi,
thanks for he head up, i have downloaded the rom but i have a question will i lose warranty if i install this rom ? should i consider it official rom as in from "europe htc" ? and finally can i do the upgrade using windows vista with Windows Mobile Device Center ?
thanks,
i||uSi0n^
dorways said:
I hope I'm not breaking any rules...
Here it is:
Code:
RUU_Hermes_QTEK_FRA_2.11.256.1_102_6275_1.38.00.10_108_Ship.exe
http://rapidshare.com/files/28220588/hermes_fr.rar
Click to expand...
Click to collapse
Thanks, will try this one...
This 's extract version from RUU_Hermes_QTEK_FRA_2.11.256.1_102_6275_1.38.00.10_108_Ship.exe
OS+EXTROM (no radio,IPL,SPL) request hardspl olipro.tested
http://rapidshare.com/files/28244789/RUU_Hermes_QTEK_FRA_2.11.256.1_102_6275.rar.html
Good rom
viva belgium
voice command 1.5 prob
HI,
did upgrade with this rom and everything is ok... but VC 1.5
each time i start it, it says Vc has encountred a problem , restart it and retry.
I also noticed that VC settings has now an "activated " and "pswd protected" check box. the problem is that, if i toggle the activated checkbox and klick ok , it won't stay toggled .
Can anyone help me please
Thanks
Th
No problem for me.
The audi car kit's issue is solved but the screen alignement's probleme still...
perfect for me too
I can't turn on my wifi anymore. Who has the same problem ?
fine for me, sorry
for me too, no pb with wifi.
try a hard reset
Hi all,
I would like to send my hermes for repair and upgrade to this ROM but my bootloader is still SPL-1.40.olipro !
How can I replace them?
Hi,
I need this rom, but the link does'nt work anymore. Could someone re-upload it or send it to me ?
TIA
Grom
Hey,
Newbie here. I own two smartflips bought from i-mate hq (Dubai). However, i'm now in Aus. WM6 looks nice and i must say, great work and appreciation for those who cook up these ROMs. However, i noticed that all these ROMs start off from either Cingular or QTEK or HTC. why leave i-mate ROMs behind guys? Anyways, before i try out any of these ROMs, i just don't want to end up killing my phone. I've searched high and low for i-mate stock ROMs (WM5). I saw one in a post but that was like WWE or something which i'm not sure what it means. I don't want to register on i-mate and do loads of form-filling and IMEI filling just to get some ROMs. Anyone have any idea of where i can acquire some 'stock' WM5 i-mate ROMs (not qtek or cingular or htc or wotever).
The other thing.. i haven't SuperCID-ed my smartflip. I tried to get to the bootloader (for no reason.. just experimenting) by pressing the keys n all but it doesn't show up. it goes to the i-mate screen.. then flashes an HTC logo and boots WM5. Once again my smartflip is Out-of-the box, hope that helps someone explaining the phenomena. i do have the i-mate CD that came with it. However didn't find and option to install Windows Mobile 5.0. I need a ROM to keep a backup in case i screw up. If anyone could help me obtain an i-mate WM5 ROM, it would be greatly appreciated.
Also, how would one find out the IPL and SPL of the smartflip? As i mentioned i wouldn't like to brick my phone. It is mentioned somewhere that the 3.06 or wotever IPL and SPL version are not capable of flashing through micro-sd card. Not sure but i think the 4.0 or wotever can flash through micro-sd card. Apart from the link(to files) posted in a thread, isn't there an 'official' way of getting to update the IPL and SPL?
Sorry for such a long post. One thing i must say, great work guys. I would like to suggest people to follow up on their threads. there was one 'bricked' post but the person said he found a solution but never posted what his solution was. It would be helpful if he could have posted the solution as it does help others. Apologies if i said anything wrong.
Thanks,
Dan.
You used to be able topick up Imate roms from ftp://ftp.clubimate.com
But they won't be nearly as good as the cooked Wm6 ones. Just follow the instruction and flash away.
(WWE means worldwide english)
Flash one of the cooked ones! I use Erofich's 6.1 and it's great.
WWE just means WorldWideEnglish as opposed to other languages.
Good luck
I have a SmartFlip upgraded with GnatGoSplat's WM6 ROM (Eurofich' WM6 is better but GPRS doesn't work): it works fast and without problems.
WM6 ROM, SPL/IPL and Radio at:
http://forum.xda-developers.com/showthread.php?t=368715
Imate didn't upgrade the SmartFlip's ROM to WM6.
D'rath
D'rath said:
Eurofich' WM6 is better but GPRS doesn't work
Click to expand...
Click to collapse
What's a problem? Use my WM6.1 where everything works
http://forum.xda-developers.com/showthread.php?t=374397
just install a Cumulative Fix after flashing and have a fun
Btw, you can also use Jony_aa's WM6 AKU 0.5.1 ROMs with most useful software included, or clean version
http://forum.xda-developers.com/showthread.php?t=373099
Thank you all!
Hi,
Thank you all for your responses. i-mate roms at imate ftp site is confirmed. Thanks unwired. The thing is i take calculated risks and have most info before i do some thing. so if i end up somehow bricking my phone, i will know what to do before dad kills me . Now i just need to update the IPL/SPL and get into bootloader to see if it works. Then gonna flash with WM6 or WM6.1. I just needed a stock ROM to keep as backup because its mentioned somewhere that if your phone is bricked, u can try to flash it using micro-sd card flashing. but that only works with stock ROMs if WM6 flashing fails. Anyways, thanks once again. i will keep you guys updated on my progress.. Thanks!
Best Regards,
Dan.
Erofich said:
What's a problem? Use my WM6.1 where everything works
http://forum.xda-developers.com/showthread.php?t=374397
just install a Cumulative Fix after flashing and have a fun
Btw, you can also use Jony_aa's WM6 AKU 0.5.1 ROMs with most useful software included, or clean version
http://forum.xda-developers.com/showthread.php?t=373099
Click to expand...
Click to collapse
I Try WM6.1 but it gives me problems importing old sms (the inbox elements are stocked in send items)... i must import old sms ^^'
Jony_aa with Neo is very nice but the home isn't so custumizable: so i flash Gnat's ROM.
D'rath
PS: My English is very hungly O_O
SDA_ApplicationUnlock
Where can one get the SDA_ApplicationUnlock.exe? the superCID thread didn't mention where to get it or either i missed it... anyone out there to help me??
Thanks,
Dan.
(If i succeed in doing this.. i'll make an Utimate WM6 for STRTRK guide)
IPL/SPL
Hi,
Sorry for multiple questions. I still haven't been able to get into the bootloader by pressing the voice notes and camera and power on key. I'm still not sure how it goes. Do you have to hold the keys, press the power button and let go immediately of all the three keys or do you have to hold the power button for long with holding the voice and camera keys? i need to check which version of the bootloader i have to make sure it supports flashing from micro-sd. Thanks in advance.
Regards,
Dan.
EDIT: I was also looking for some way to backup software from my current WM5 ROM. There are some apps that come in-built which i like. But since i don't have the .cab(s) i was wondering if there would be a way to backup software and later on install it. Any help would be greatly appreciated.
Out of a million tries, I only managed to get into the bootloader ONCE that way. Okay, I exaggerate, but I found it almost impossible to use RECORD, CAMERA, and POWER to get into bootloader. Instead, I've found with the phone OFF, press RECORD, CAMERA, and plug the USB connector into the PC while holding those buttons. It goes into Bootloader every single time that way.
You can back up the built-in apps, but it requires figuring out which files belong to which app, and also getting their registry entries. Then you can either manually copy all those files into the phone and manually import the registry entries, or make them into a cab file to automate it.
WOW.. thnx for that!
Yup! Worked like a charm! i have IPL/SPL 1.02 or wotever.. so i don't need to worry about micro-sd card flashing problems ( i hope i never need to use that in my life). So if it works this way.. i would recommend others who have bricked their phones and trying to flash it holding the record, and camera button while phone is off, plug it in the usb. As soon as i did that, Vista picked it up as a mobile device. the bootloader ( the screen sucks! what a dreadful combination of colors!) also shows a usb sign at the bottom. I hope this info helps those who bricked/killed their phone and were finding it hard to re-flash it. As it is mentioned in some thread... if wm6 flashing fails, u have to revert back to stock rom WM5 (cingular rom for cingular phone, i-mate rom for i-mate, etc) and then re-flash with WM6. I wonder if rom update utilities work when in bootloader connected to pc.
Once again, thanks for your reply GnatGoSplat. As for the apps, yea.. i know its bad. I did check over onto the i-mate site and found a file 'Arabic...' something. it didn't mention it as a rom so i'm hoping they are the software packages that come with the default middleast rom. You might have heard of 'Portableapps' on PCs. They are little beauties. Because the original windows and windows mobile are linked closely.. i might wonder if there could be a way to port those ( or even create your own) onto windows mobile. I know how to make portableapps so if you need any info, i think i could help unless someone knows better.
So where do i get the SDA_ApplicationUnlock file? Thanks.
Regards,
Dan.
Dan_Ultimate said:
So where do i get the SDA_ApplicationUnlock file?.
Click to expand...
Click to collapse
Get it from attach
Thanks.. sadly, i've got some bad news...
Hi,
Thanks for the file Erofich. Unfortunately, I've just been caught up with studies and hence will not be able to work on modding my i-mate until i get some free time. however, i'm still going to try to work on an 'Ultimate WM6 for Startrek Guide'.
Its just that its better for end-users because some of the information is scattered around and 'some' of the instructions are a bit hard to follow (no offense to anyone). If anyone has any concerns or is against my actions, please let me know.
Regards,
Dan
i want EUR rom, with spanish language... all roms are WWE in english or russian.
know any european rom wm6 for star trek?
moebior said:
i want EUR rom, with spanish language... all roms are WWE in english or russian.
know any european rom wm6 for star trek?
Click to expand...
Click to collapse
You can translate some menu (in the post of WM6 by Eurofich you find how) but not all of them.
You can get the xT9 with spanish language with a cab you can find looking in that ROOM.
D'rath
arabic laguage smartflip
sir i try to make arabic laguage my i-mate smartflip but i cant do it..i seek from last one month plz help me tel me how can i make arabic my smarflip.plzzzzzzzzzzz.
irfansamsia said:
sir i try to make arabic laguage my i-mate smartflip but i cant do it..i seek from last one month plz help me tel me how can i make arabic my smarflip.plzzzzzzzzzzz.
Click to expand...
Click to collapse
What's the version of your rom ?
for official rom ( win 5.0 ) , you can go to this topic :
http://forum.xda-developers.com/showthread.php?t=400183
and if you install erofish's great rom ( win 6.1 ) go to this one :
http://forum.xda-developers.com/showthread.php?t=465294
i-mate smartflip
Thanx for repy bro.but same problem ,i update widh this rom..but stil same.no arabic when i try to instal arabizersute its say unsuccsecful..when i try to instal it by memory then also same..plz help me ..i have two device same proble.
Hi
1. do you use from this ro M : WM6.1 Build 5.2.19593 AKU 1.1.7 by Erofich ?
2. second link is specially for imate smartflip then i don't now what's your problem ( maybe don't install your new rom correctly )
3. arabizer must be installed on phone memory ( not memory card )
Good luck !
Thanx bor.its working nice .....thanx again...mawah....
Hi, i have to send my device to o2 Germany Service. Can please somebody tell me what Radio, Protocol and ROM Versions are shown on the startscreen by the original device?
Thx.
p.s. tried to use search, but found nothing...
p.p.s. really need help...
On mine it used to be this radio: 1.58.21.23
I am not sure about the system, but there is a thread for original Roms around here with a german o2 dump ( http://forum.xda-developers.com/showthread.php?t=368284 ). That should be fine. Don't forget to get rid of the SPL too...
mblaster
sure, i've flashed original ROM and SPL, but this is what i've got on a bootscreen.
I dont think, it's ok...
You still seem to have radio version 1.71.09.01. Your phone should not work properly with that one (ok, obviously it doesn't anyway, but the service could notice that). This stock rom needs radio version < 1.65.x.y. So you need to do SPL again to flash the older radio.
Unfortunately I dont know the exact output on the bootscreen for a xda star that has never been flashed, but there may be variations in any case. I dont think the service will notice something if you have the right radio version, a stock rom and no "security unlocked" message in the bootscreen, perhaps someone can confirm this?
mblaster said:
You still seem to have radio version 1.71.09.01. Your phone should not work properly with that one (ok, obviously it doesn't anyway, but the service could notice that). This stock rom needs radio version < 1.65.x.y. So you need to do SPL again to flash the older radio.
Unfortunately I dont know the exact output on the bootscreen for a xda star that has never been flashed, but there may be variations in any case. I dont think the service will notice something if you have the right radio version, a stock rom and no "security unlocked" message in the bootscreen, perhaps someone can confirm this?
Click to expand...
Click to collapse
Thx, i'll try to flash older radio today, but what about "1iki"? Should it be there?
Ok, now i flashed it again. This is what i've got
P.S. Spl is 1.16.0000
Is it ok now? )
Hey guys,
thank you very much for the hint about the original German Windows Mobile 6.0 HTC Nike ROM.
I checked that one and it's working fine with HardSPL.
Nevertheless I wasn't satisfied yet so I was looking for an updated ROM and I was successful.
I found an original Windows Mobile 6.1 German ROM and that one is working fine as well.
Due to the fact I hate Rapidshare I have also uploaded the ROM to MegaUpload.
Here they are:
http://rapidshare.com/files/1530151...407.1_Radio_NikeMR_1.65.28.25_signed_Ship.exe
http://www.megaupload.com/?d=D9YXW8OX
Enjoy