[Q] Usb storage not detected. - Galaxy S II Q&A, Help & Troubleshooting

OK so, i deleted some games off of the usb storage, rebooted the phone and now the USB storage is not detected. E.g. when i go into my gallery, it says USB storage disconnected. And the battery indicator, clock and all that stuff dissapeared. When i look at how much space i have left on the USB storage it says `not available`. Havent tried wiping enything yet, coz i dont have any recent backups.
Thanks vm.
Sen

Please use the Q&A Forum for questions Thanks
Moving to Q&A

Edit - didnt' read correctly...

USB storage their is no USB connected is their that requires cable to PC .
jje

I mean the whole 16gb`s are gone, atm got only 1,27gb in the whole phone.

I am saying USB storage is not SD card you cannot store data on usb storage unless you have a connected cable with the usb storage on the end of that .
Backup data and factory reset is all i can suggest .
jje

Related

[Q] How do I get the phone in mass storage mode when connected to a PC

I am trying to view the files on my phone on my PC at work. I am unable to install Kies. I have tried the USB Utilities section but it does not work. On my HTC when you plug the USB in it came up with a menu asking you what you wanted to do, is there sommething like this on Samsung phones?
FYI, this is my first Samsung phone.
Enable USB Debugging mode...not sure if it still needs the drivers for that though, I think you still might.
try pull down the top bar and select the usb message, then click on connect storage from pc
Tried that, still nothing. If you still need drivers thats rediculous! I should b able to plug my phone into any computer and view my sd card files, if not then its not much better than an iphone!
that's strange.. i got sgs2 delivered to my work today, so yeah I have no related software or drivers installed, plugged in and entered usb storage successfully.
Btw my PC is still on XP and i cancelled all the driver request that poped up
vinokirk said:
Tried that, still nothing. If you still need drivers thats rediculous! I should b able to plug my phone into any computer and view my sd card files, if not then its not much better than an iphone!
Click to expand...
Click to collapse
No drivers needed AFAIK for mass storage... Can you check device manager and see if it shows.
Got it:
-Enable usb debugging
-return to home screen
-plug usb cable in
-pull down status bar
-press ' connect usb storage' button
vinokirk said:
Got it:
-Enable usb debugging
-return to home screen
-plug usb cable in
-pull down status bar
-press ' connect usb storage' button
Click to expand...
Click to collapse
It works for the internal mass storage, but i have a 16GB Sandisk SDHC card installed... i used to see/find both the internal storage and the 16GB card in my computer after connecting through USB cable but suddenly from today i am not seeing the 16GB card though it is accessible through My Files on the phone.
Any help??
Ok it's very simple you go settings then wireless and networks,usb utilities,click turn on usb storage then connect cable to pc.
i go into settings and choose usb debugging this way it stops the kies pop up each time
Sent from my GT-I9100 using XDA App
vinokirk said:
Got it:
-Enable usb debugging
-return to home screen
-plug usb cable in
-pull down status bar
-press ' connect usb storage' button
Click to expand...
Click to collapse
There is another approach.
1- Disconnect cable from phone
2 - Disable (uncheck): Applications \ Development \ USB Debugging
3- Go to Wireless and network \ USB utilities
4- Click Connect storage to PC. A message will show up with a "Cancel" button. DO NOT CLICK IT.
5- Connect cable to phone. The little green robot will show up.
6- Click the button to enable USB mass storage.
Whats the catch?: If you only enable USB debugging, only the Extenal SD will mount. If you do this way, then Internal USB and Extenal, both, will be mounted.
dartveiga said:
There is another approach.
1- Disconnect cable from phone
2 - Disable (uncheck): Applications \ Development \ USB Debugging
3- Go to Wireless and network \ USB utilities
4- Click Connect storage to PC. A message will show up with a "Cancel" button. DO NOT CLICK IT.
5- Connect cable to phone. The little green robot will show up.
6- Click the button to enable USB mass storage.
Whats the catch?: If you only enable USB debugging, only the Extenal SD will mount. If you do this way, then Internal USB and Extenal, both, will be mounted.
Click to expand...
Click to collapse
tried this to no avail. After I connect cable at step 5, no little green guy, no option to choose? Any ideas?
Is it a proper data cable?
Sent from my GT-I9100 using XDA App
wickedsaint said:
It works for the internal mass storage, but i have a 16GB Sandisk SDHC card installed... i used to see/find both the internal storage and the 16GB card in my computer after connecting through USB cable but suddenly from today i am not seeing the 16GB card though it is accessible through My Files on the phone.
Any help??
Click to expand...
Click to collapse
The external storage is actually a sub directory on the phone storage, it's called external_sd_card iirc (if I remember correctly)
Welcome to the world of Samsung
UMS not mounting - W7
Hello, I have the same problem.
I have done the following already and it doesn't work:
·Updated Kies in hope to get the drivers for my phone.
·Looked for support in official Samsung website, thus downloading a program to install the drivers for my phone.
·Update through Windows update (failed in windows)
Also when i enable USB debugging mode I am forced to disable it just before turning on the USB Mass Storage. Doesn't mount and doesn't recognise phone (can't find in Device Manager).
I suppose I could live using the MTP way but still, like voiced by other people I would also like to have USB Mass Storage mode.
Thank you.
Solution:
I think I have found the solution, I have not tried this yet and supposedly you need CF-root kernel (so Siyah and other kernels might not work). Here is the link:
CLICK HERE
Like the author of that thread has said, I am not responsible if your phone gets bricked, stolen, eaten, drunk, chewed by your dog or anything of the sorts either directly or indirectly! USE AT YOUR OWN RISK!

how to recover deleted data from sd card ?

When I try to connect it to the computer over USB it shows up as a "Portable Device" in windows 7 and I am unable to use file recovery software on the computer because of this.
Is it possible to mount the internal memory over USB Mass Storage so I can try recovering the files with a windows program?
Any suggestions would be much appreciated.
Are you using settings to set to USB mass storage mode ?????
Have you actually installed the Samsung USB drivers ??/
jje
recover them without a computer HERE
Undelete for Root Users
or
Hexamob Recovery Lite *root*
JJEgan said:
Are you using settings to set to USB mass storage mode ?????
Have you actually installed the Samsung USB drivers ??/
jje
Click to expand...
Click to collapse
yes i can see all the file..but when i deleted all my photos by mistake i am try to recover them through recovering soft the problem it i try several recovery softwares they seems dont detect "portable device" so i was looking for something to turn my phone as Mass storage ????
or if you dont have internet on your phone use these

[Q] CM9 4.5.1 Atrix 4G SDCard issue

I am running CM9 4.5.1 with GApps v12 on an Atrix 4G. The issue I am having is that when I connect via USB cable to my XP system, my PC detects the two sdcards (internal and external) but I can not access either one of them..."Please insert disk into drive" like they are not formatted.
I did find that the external sdcard is now being seen in the phone as folder EMMC and both of them have data so I don't think it is a format issue.
I have tried to connect via USB using the MTP and Mass Storage Option and rebooted the phone both times after the change was made. Neither attempt worked.
I have searched through the forum as best I could but with the CM9 thread pushing 1000 pages, I'm not sure if anyone has come across this. If so, what was done or are there any suggestions out there? Thanks.
Never mind, I figured it out after installing new USB drivers from Moto and trying everything else. Found out it was a simple/stupid oversight on my part. So if this happens to anyone else....
Even though I had Mass Storage enabled in the settings, when I connected the phone via USB to my XP Pro Pc, I had to pull down the notification bar, select USB storage, and turn it ON. I guess by default it is turned off. Once that was done, I am now able to access the sdcards on my PC.
I did find during all of the research and trial/error that the sdcard-ext is now the sdcard and the sdcard is now emmc in the folders. I believe there is a way to change this (xda thread) but I can live with the way it is.

[Q] "USB Storage Damaged"

When I am trying to connect my usb flash stick to my tab using the original Samsung USB adapter I am getting this message: "USB Storage Damaged, you may have to reformat it" . So I reformatted my USB to FAT32 and I am still getting this message. It happens with 3 of 4 USB flash drives.. and some of them actualy worked before. I dont have any problems with those drives when I connect them to my PC.
P.S :
I am getting mouses to work so I dont think its a problem of the port.
Questions go in the Q&A section

[Q] Big problem, would appreciate some help.

I have the following problems:
1. I can`t copy files to both the internal and external sdcard through usb
I tried to uninstall Kies and all the drivers, rebooted and reconnected the phone and windows says usb drivers not installed: missing cdc serial number. Than i installed Samsung mobile USB driver 1.5.5.0 and still cannot transfer files to and from the phone.
2. If i transfer files with Airdroid i cannot flash tem, it says E: not accessible ( i formated the external sdcard twice both on the phone and on the pc). Flashing from the internal sdcard is also not possible.
I have no clue what happened and i hope someone can provide a usefull tip. I`am on stock rom right now ,not rooted and did a factory reset and still no transfer possible. Get the message: Device stopped answering or the connection is broken. Tried several usb ports, using a samsung usb cable.
-Edit- SOLVED

Categories

Resources