[Q] problem in installing original rom - Android Q&A, Help & Troubleshooting

i have Acer betouch E400 phone i installed custom rom called dark_firmware_noir2165
then i tried to install the original rom from acer site called OS_Acer_1.022.06.EMEA.GEN3_A21E_A
and i have this error
we are sorry !you cannot upgrade your acer E400 with this new image , please download the image for your SKU
any help in this?
---------- Post added at 04:29 PM ---------- Previous post was at 04:16 PM ----------
i solved the problem sorry for that , but i wanna share the solve for any one need it,
enter the recovery mode, then open the program again and install the rom
please close this topic and sorry again

hi
im not able to find this rom any where will u pls help me with that i need a download link thanks

Hi.
I',m author of this custom ROM
You can find it on the link:
http://acer-club.ru/topic/11024-custom-rom-darkfirmware-noir-102206-для-acer-betouch-e400/
You can try install original ROM with this instruction(I don't know - work it or not: I don't have this device):
Install official 1.018.13 ROM (http://acer-club.ru/topic/7714-офпрошивка-101813emea-gen1/)
After this get the root permissions, install and open Root Explorer and edit in /system/build.prop and on /system/flex/cci.prop text with "GEN1" on "GEN3" region
for example:
ro.cci.data=GEN1
ro.cci.flex.version=FF_E400_101813_EMEA_GEN1
replace on:
ro.cci.data=GEN3
ro.cci.flex.version=FF_E400_101813_EMEA_GEN3
and try to flash on 1.022.06 rom again
Sorry if you have some problems with ROM - he oriented on european market users and have problems with support arabic RTL.

can not find any folder named FLEX under system root
DViolet said:
Hi.
After this get the root permissions, install and open Root Explorer and edit in /system/build.prop and on /system/flex/cci.prop text with "GEN1" on "GEN3" region
for example:
ro.cci.data=GEN1
ro.cci.flex.version=FF_E400_101813_EMEA_GEN1
replace on:
ro.cci.data=GEN3
ro.cci.flex.version=FF_E400_101813_EMEA_GEN3
and try to flash on 1.022.06 rom again
Sorry if you have some problems with ROM - he oriented on european market users and have problems with support arabic RTL.
Click to expand...
Click to collapse
can not find any folder named FLEX under system root
is there any thing i can do

Related

[Q] about kitchen 1.63 ,i can not add app in rom by add /data/app

HI
Dear Dsixda
i use the kitchen 1.63 to customise my zte blade rom ,but when add the support of data/app functionity ,it shows successfull and also create a new data on working folder ,so i copy some of the need *.apk to the data /app folder ,then bulding new rom throght kitchen 1.63 .after ok ,i flash it ,but no my adding app run after i flash the rom by kitchen ,
could someone tell me why ? what the problem happen in my step ?
dsixda ,can you tell me why ? can you help me ?
is any boday ,here ,who can help me ?
help
help .help
help
Please post in the appropriate thread and not start a new one.
Secondly, read the kitchen FAQ for answers before asking a question, as stated a few times on post #1.

[Q] GPS Fix for Ginger yoshi rom 1.5

I found this post on this forum:
Originally Posted by ceskopanjy View Post
which kernel is the best for magic 32A new spl end radio?
IMO the one that's included.. there are others, but I suppose that the developer team would know what is the best one for their ROM
Originally Posted by kajapezz8 View Post
Hi, with this rom & carz kernel i get no GPS revealed...when i can fix?
Use the included kernel, works for me, and if you still have problems:
1. Download this.filesonic.com/file/268413...shi-gpsfix.zip[/url]
2. Archive it to the root of your SDCARD
3. Apply the two flashable zips that you extracted in recovery
4. Reboot
5. Test GPS
What i need to know is if anyone can help me get this fix, because on this link the file doen't exist anymore, anyone could send me a link that works, or send to me a PM, then i reply with my email, to send me back the fix file.
Thanks in advance.
Rui
Anyone please???????????

[Q] Kocaso M1050S compatibility pack for CM10

Hello community!
I'm looking for help to build a Kocaso M1050S compatibility pack for CM10 (http://forum.xda-developers.com/showthread.php?t=1821398).
It should be a recovery based zip mod, but I'm not sure how to build it.
I've downloaded an original firmware from here: dl [dot] dropbox [dot] com/u/22474333/Kocaso_M1050S_Softwinners_Crane-bc1003_ICS_4.0.4_ENG_Build_%2318_Firmware.img and works just fine. Now I'm looking a way of running Christian Troy CM10 port on it. The port works itself, but the touchscreen doesn't responds at all. So seems like I need to apply a correct drivers there. I've unpacked original firmware and included all required files from it (script.fex, complete modules and etc directory, idc and icu, /lib/hw). I guess that is enough to build the patch for it. Here is the smaller archive for these files, so you don't have to download the complete firmware: www [dot] multiupload [dot] nl/A4WUIS15D3
Could somebody please help to build a recovery patch from these files?
EDIT: Oh, and here is the init.sun4i.rc from firmware: pastebin [dot] com/qNguiS75
Couldn't find much on this tablet. I would also like to do the same as you. My wife won this tablet at an arcade and think it would be a pretty decent unit if it didn't run so slow. Did you manage to find anything out? I'm going to look around myself. I've been doing AOKP builds, I might sync up Troys and mess around with it this week.
No info still. I don't have an experience in building the compatibility patches. But it should be doable with files I've provided and someone who can do it.
NStorm said:
Hello community!
I'm looking for help to build a Kocaso M1050S compatibility pack for CM10 (http://forum.xda-developers.com/showthread.php?t=1821398).
It should be a recovery based zip mod, but I'm not sure how to build it.
I've downloaded an original firmware from here: dl [dot] dropbox [dot] com/u/22474333/Kocaso_M1050S_Softwinners_Crane-bc1003_ICS_4.0.4_ENG_Build_%2318_Firmware.img and works just fine. Now I'm looking a way of running Christian Troy CM10 port on it. The port works itself, but the touchscreen doesn't responds at all. So seems like I need to apply a correct drivers there. I've unpacked original firmware and included all required files from it (script.fex, complete modules and etc directory, idc and icu, /lib/hw). I guess that is enough to build the patch for it. Here is the smaller archive for these files, so you don't have to download the complete firmware: www [dot] multiupload [dot] nl/A4WUIS15D3
Could somebody please help to build a recovery patch from these files?
EDIT: Oh, and here is the init.sun4i.rc from firmware: pastebin [dot] com/qNguiS75
Click to expand...
Click to collapse
Kocaso M1050S the .img link is broken. I will be grateful if you able to provide me with correct one. and another question: how did you install CWM recovery. thx in advance.
Same here, haven't had time to try and mess with it. I'm going to download a pack and see whats done in there. I'm going to switch into Ubuntu in a few and try and sync with CT's git as well.
I installed CWM 6.0.1.2 using this tutorial :
http://forum.xda-developers.com/showthread.php?t=1802268
It seems to work so far. It reads my SD card and I was able to perform a backup. I've done nothing else at all with it yet so i'm not sure if it's really working properly but so far my device is still working fine.
---------- Post added at 07:58 PM ---------- Previous post was at 07:52 PM ----------
Also I got the files you are looking for from another site.
Google this exactly :
MID_M1050s(chinese) bricked at android screen
As i'm unsure if outside links are ok here. It should be the first result. It's posted further down the thread.
Right, here is the new download link for firmware: docs.google.com/folder/d/0B_88d7OJP9HPWWEwejlSQkQ0X2s/edit
I'm still looking for CM10 mod...
working one for me
NStorm said:
Right, here is the new download link for firmware: docs.google.com/folder/d/0B_88d7OJP9HPWWEwejlSQkQ0X2s/edit
I'm still looking for CM10 mod...
Click to expand...
Click to collapse
Thank you! But this firmware stops at 3 percent of flashing.
I finally found a working version and http://www.irexsoft.com/M1050_bc1003.img
I think that we can take device drivers from it for CM10)
kocaso m760 stuck in bootloop.....kind of
NStorm said:
Hello community!
I'm looking for help to build a Kocaso M1050S compatibility pack for CM10 (http://forum.xda-developers.com/showthread.php?t=1821398).
It should be a recovery based zip mod, but I'm not sure how to build it.
I've downloaded an original firmware from here: dl [dot] dropbox [dot] com/u/22474333/Kocaso_M1050S_Softwinners_Crane-bc1003_ICS_4.0.4_ENG_Build_%2318_Firmware.img and works just fine. Now I'm looking a way of running Christian Troy CM10 port on it. The port works itself, but the touchscreen doesn't responds at all. So seems like I need to apply a correct drivers there. I've unpacked original firmware and included all required files from it (script.fex, complete modules and etc directory, idc and icu, /lib/hw). I guess that is enough to build the patch for it. Here is the smaller archive for these files, so you don't have to download the complete firmware: www [dot] multiupload [dot] nl/A4WUIS15D3
Could somebody please help to build a recovery patch from these files?
EDIT: Oh, and here is the init.sun4i.rc from firmware: pastebin [dot] com/qNguiS75
Click to expand...
Click to collapse
hi there i hate to be a noob but i have a kocaso m760. i tried the vold fstab memory swap trick, now im in bootloop, but the tablet will only work while plug and accessed by adb. when i unplug it bootloops. i downloaded my devices firmware, but cant find a .img file to restore to. any suggestions would help. thanx

[Q] Problem in generating update script???

Hey Guys I don't know . its right to post a new thread here or not?
Guyz I am facing A issue with creating flashable rom update.zip package with dxda kitchen by my clockworkmod backup! whenever I tried flashing my cooked rom in cwm 6.0.x It always says update failed. I searched on google and come to know that it a update script or binary prob. Then I searched on xda nd come to know that there is no programe who create update binary. But then the question arise " Is all the binaries Same for all devices??" or having any defference?
And second question is for update script ...
How to get mount point on device? (I know its different for all)
I should also say these all question stuck my mind when i was trying to create a flashable rom.zip via cwm backup with dxda for my tablet ubislate 7c !
Can Any One here answer my qus or give me the refrence where i find answers!
Thanks in advance !!!!

[Q&A] [GUIDE] [how to] CREATE OWN ROM [FOR ANY ANDROID DEVICE] [FOR N00B] [EASIEST M

[Q&A] [GUIDE] [how to] CREATE OWN ROM [FOR ANY ANDROID DEVICE] [FOR N00B] [EASIEST M
Q&A for [GUIDE] [how to] CREATE OWN ROM [FOR ANY ANDROID DEVICE] [FOR N00B] [EASIEST METHODS]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [GUIDE] [how to] CREATE OWN ROM [FOR ANY ANDROID DEVICE] [FOR N00B] [EASIEST METHODS]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
nice guide
lokeshsaini94 said:
Special Thanks to -
Who is this tutorial for?
Tools Required : (Update them manually and report me dead links please)
Step one: Installing the JAVA JDK, Cygwin and Setting up the Kitchen.
*Before you do anything install the java jdk*
INSTRUCTIONS
Download and extract the cygwin_packages.zip
Run the set up(make sure there is no previous cygwin installation)
when it shows all the package names, go to the top and select "all default" until it changes to "all install" (you must click on the arrows)
Download the kitchen from above. Then, extract the kitchen's .zip file to a folder under your home account. Rename the dsixda-android-kitchen-*** folder to just "kitchen". In Cygwin, this folder would depend on what was set for your Cygwin install directory, e.g. C:\cygwin\home\John\kitchen
NOTE!! If your user folder contains spaces (e.g. C:\cygwin\home\John Smith\kitchen), then the kitchen will not function properly. Instead, copy it under C:\cygwin\home\kitchen.
Now your ready to run the kitchen type:
Click to expand...
Click to collapse
easy-to-follow guide..
Building custom Rom for gear 2
Hi, like the title says I would like to modify my gear 2.. I was wondering if it was possible to build a rom for my gear 2 so it works like the gear live?
Would it be possible to use a existing gear live rom and modify it and install it on gear2?
Thanks for your help..
how to restore laf partition in case of boot certify error lg g3 d855
stuck in cyanogenmod 11. lg flash toool not working so cant flash sock kdz. cant go into twrp so cant flash any rom also. please help. reading on xda forum i ot that i accidentally deleted laf partition. nw i got no img files. how to restore my phone to stock.
Sent from my SKY5.0D using XDA Free mobile app
---------- Post added at 04:07 AM ---------- Previous post was at 04:02 AM ----------
Um new to all this
So I was wondering
How would I know if it would work on my phone and it said something about rooting, how I I go about that?
Sent from my SKY5.0D using XDA Free mobile app
Thank you man.
I have a question : What should I do to install Android 5.0 for my HTC Desire 600?
During Setup Kitchen .....
how to solve this problem......
In this thread Dsixda_Kitchen_Install_Picture_Tutor.zip link is not working. If you guys want to see the pics, plz google Dsixda_Kitchen_Install_Picture_Tutor.zip. You will able to download the zip file.
Nice tutorial
Hello,
Nice tutorial very helpfull...
I`m just started making my own Rom and this tut is very helpfull....
Thnx
not working for me
not working for me on galaxy chat
Guys I ported cyanogenmod 12 Rom for q700s from android one devices Bt when flashing it gives status 0 error anyone know how to fix it
All the images are blank, no matter what browser I use to view this.
Hi,
I'm trying to follow your instructions, but all of the images you have all the way down are blank, they all give an error stating find on image shack?
Do you have a complete tutorial that I could download that has all of the images included?
Thank you,
Nordis,
Updating via custom custom ROM?
Hi,
Quick question. Would I be able to update my tablet by taking its 4.1 OS and using the data to customize another manufactures 5.0 ROM using system folders and anything I can find in the root folders?
Thanks.
Rom porting
I ported 5 roms(CM and xperia ROMs included) to my device, a tecno n9 Phantom pad. They boot successfully but within 1 minute of booting, the screen of the custom roms suddenly go blank for a while and finally reboots. The roms are all JellyBean based custom roms . My specs: quad core 1.2ghz, 1gb ram, 16 gb rom, JB 4.2.1 What am I doing wrong cos the problem persists in all the ROMs. Here's my logcat
nice tutorial
thanks for this tutorial
ERROR while flashing
error executing updater binary in zip - I got this error previously also while flashing other custom rom, but then i came over it by some or other way given in GOOGLE but this time when cooked my own ROM nothing is happening every time i get the same message
Plz help with this error and can u tell me why this error occurs
Wow, thanks works like charm.
Good
Sent from my 2013023 using XDA Free mobile app
Anything about porting custom recovery?
Will I be able to develop Lollipop ROM?
Will I be able to develop a Lollipop ROM for my device using that tutorial, although there isn't a Lollipop ROM at the moment? Because I didn't see usage of Android's source code

Categories

Resources