Hi all,
I update to RC4B rom. But I stock in screen lock. I can't open it. Anyone can help me to solve this problem?
Thank you very much!!!
PULL the ring to unlock?
Pull the ring upwards?
If u mean that the screen is stationary and not responsive to any touch input, then I guess you just have to reboot or reinstall the ROM.
Remember to wipe data/cache/Dalvik cache as I always do that before any installation of new ROMs
Pull the ring upwards，the way to unlock screenlockis different....
Related
Just now i decided to update froyo to gingerbread and dx is a very nice looking and fast rom. But the weird thing is that the screen will fades and eventually turn off by itself, the only way to get the screen to work again is to press lock button to lock then unlock. This issue doesnt get away after few reboots. Also chinese language in dx is not fully supported.
Does anyone have the same problem?
Should i try any other gingerbread rom?
This is how i install rom:
Wipe dalvik cache, wipe partition cache, fatory reset, flash rom, flash modules_fix, flash cmparts_fix, factory reset.
Is this correct?
Hi,
You can't use Autobrightness , go to :
-Settings
- Display settings
-Brightnesss
then UNCHECK Automatic brightness
now issue with fading screen should no to take place
Hey suddenly my phone wont unlock. When the "Swipe to unlock" screen comes up I swipe and it freezes for 20 seconds and then it reboots. It is not rooted and running ICS nordic.
I didn't do anything to provoke this. I just happened out of the blue.
What do I do?
I've tried pulling the battery and removing the sim but no luck so far.
Thx
mhh .. try doing a hard reset..
doing wipe data and factory
bgstcola said:
Hey suddenly my phone wont unlock. When the "Swipe to unlock" screen comes up I swipe and it freezes for 20 seconds and then it reboots. It is not rooted and running ICS nordic.
I didn't do anything to provoke this. I just happened out of the blue.
What do I do?
I've tried pulling the battery and removing the sim but no luck so far.
Thx
Click to expand...
Click to collapse
Did you do a full wipe before installing ICS? If not that could be the cause of error.
I did a wipe to factory data and now it seems to be working again.
Thanks
hii
sorry about my english i try to explain shortly
Phone in deep sleep, wont ring at all, it wont even show a missed call
If I wake the phone up and call it, phone rings almost instantly.
.Full wipe and re-install of ROM and I am getting the same crap.
I am completely back to stock, factory reset and all. The issue is still happening, if the screen is off and phone is in sleep the device will not ring
i also odin'd the modems,kernels and same.
i dont have warrenty, there is something i can do?
help me plz!:crying:
yairalm said:
hii
sorry about my english i try to explain shortly
Phone in deep sleep, wont ring at all, it wont even show a missed call
If I wake the phone up and call it, phone rings almost instantly.
.Full wipe and re-install of ROM and I am getting the same crap.
I am completely back to stock, factory reset and all. The issue is still happening, if the screen is off and phone is in sleep the device will not ring
i also odin'd the modems,kernels and same.
i dont have warrenty, there is something i can do?
help me plz!:crying:
Click to expand...
Click to collapse
Hmm ... should be modem-related.
Try to flash another modem (for your region + mobile carrier).
Then wipe cache and Dalvik cache and fix permissions if you have CWM.
Have you changed the development settings?
Or energy saving?
Or have you a task killer app installed?
Good luck !
It_ler said:
Hmm ... should be modem-related.
Try to flash another modem (for your region + mobile carrier).
Then wipe cache and Dalvik cache and fix permissions if you have CWM.
Have you changed the development settings?
Or energy saving?
Or have you a task killer app installed?
Good luck !
Click to expand...
Click to collapse
i flash 4 kind of modems the last is my carrier modem(ki2)
now i on stock (lpd) with no app insttalled and i didnt tauch development setting.
you have more idea?
Hi! Trying to set up an Eris for my youngest, but have run into a strange issue. When trying to activate the phone, goes thru the 1st 2 screens (language, activate), but after pushing the activate button, the screen goes blank and calls Verizon to activate. But there is no dialer screen to push the buttons to enter his phone number. I've tried rooting and flashing, tried a few ROM's, and flashing to stock again, but as mentioned in another thread, most stock ota update flashes are patches, and don't appear to touch the dialer app. Any ideas or suggestions would be very much appreciated. Thanks in advance for any advice or suggestions.
smaugmra said:
Hi! Trying to set up an Eris for my youngest, but have run into a strange issue. When trying to activate the phone, goes thru the 1st 2 screens (language, activate), but after pushing the activate button, the screen goes blank and calls Verizon to activate. But there is no dialer screen to push the buttons to enter his phone number. I've tried rooting and flashing, tried a few ROM's, and flashing to stock again, but as mentioned in another thread, most stock ota update flashes are patches, and don't appear to touch the dialer app. Any ideas or suggestions would be very much appreciated. Thanks in advance for any advice or suggestions.
Click to expand...
Click to collapse
If it is just pressing buttons, you *should* be able to long-press the menu button to bring up the system keyboard, switch to the numeric keyboard, and just type the number that you need. If that doesn't work, then I would flash the close-to-stock xtrSENSE (make sure to nandroid backup and then flash the zip file and wipe data/factory reset after flashing). I think that the xtrSENSE download is broken, but I have it on my dropbox: https://www.dropbox.com/s/57hivjeuaulvqx5/xtrSENSE5.0.1.zip
xtrSENSE will allow you to bring up the dialpad.
Hi Xda members, here is my problem: Yesterday i rooted MY PHOTON 4G 2.3.5 version with the torpedo method, i wanted to install Jelly Beam, with this steps.. ibtimes.com/how-install-android-412-jelly-bean-motorola-photon-4g-using-custom-firmware-tutorial-939294 after the wipe factory reset step i couldn't find the install from zip on sd card option in the recovery mode so i restarted the phone and all was reset but working well and then i restored a nandroid backup and a lot of applications stopped working, had to restart the phone but the home screen was black i couldn't see nothing just the notifications, then i decided to wipe the phone again but this time when it started again after the reset in the step when motorola asks to setup your social accouts when i press done it says motorola.setup has stopped working a button with caption force close shows up but when you tap it it takes you to the setup accounts screen again and the same thing happens and i tried to wipe it again and again the same problem comes up, thank you, i hope you can help me..
disjes said:
Hi Xda members, here is my problem: Yesterday i rooted MY PHOTON 4G 2.3.5 version with the torpedo method, i wanted to install Jelly Beam, with this steps.. ibtimes.com/how-install-android-412-jelly-bean-motorola-photon-4g-using-custom-firmware-tutorial-939294 after the wipe factory reset step i couldn't find the install from zip on sd card option in the recovery mode so i restarted the phone and all was reset but working well and then i restored a nandroid backup and a lot of applications stopped working, had to restart the phone but the home screen was black i couldn't see nothing just the notifications, then i decided to wipe the phone again but this time when it started again after the reset in the step when motorola asks to setup your social accouts when i press done it says motorola.setup has stopped working a button with caption force close shows up but when you tap it it takes you to the setup accounts screen again and the same thing happens and i tried to wipe it again and again the same problem comes up, thank you, i hope you can help me..
Click to expand...
Click to collapse
You have to unlock bootloader to install jelly bean rom and since you have 2.3.5 its impossible to do unless 2.3.5 was on there when bought.
MarcquisDale said:
You have to unlock bootloader to install jelly bean rom and since you have 2.3.5 its impossible to do unless 2.3.5 was on there when bought.
Click to expand...
Click to collapse
Thanks Marcquis, Yes it was there when bought, how can i unlock the bootloader in 2.3.5 version? and also is ther ea way to skip the setup accounts crap from motorola, i don't know maybe a key combination, i can use the keyboard but that screen stays there.. when i say done it throws and error saying force close and when i force close the setup accounts comes again.. anyway if i made a mess i would like to know if there is a way to fix it or maybe install Jelly beam, thanks again Marcquis
disjes said:
Thanks Marcquis, Yes it was there when bought, how can i unlock the bootloader in 2.3.5 version? and also is ther ea way to skip the setup accounts crap from motorola, i don't know maybe a key combination, i can use the keyboard but that screen stays there.. when i say done it throws and error saying force close and when i force close the setup accounts comes again.. anyway if i made a mess i would like to know if there is a way to fix it or maybe install Jelly beam, thanks again Marcquis
Click to expand...
Click to collapse
What i mean by 2.3.5 being already on there is if it came from motorola with it on there and not being updated to 2.3.5
Download the rsd lite, moto fastboot and pudding files from here
http://forums.acsyndicate.net/showthread.php?3362-Photon-FIles
And then follow the photon pudding bootloader unlock section on this.
http://forum.xda-developers.com/showpost.php?p=20331623&postcount=6
Did you try pressing the menu button? And yes once you unlock the bootliader you can install jelly bean roms and such.