[Q] sms while in 3g - Galaxy Ace S5830 General

can anyone help
i seem to have a problem with sending a sms while 3g is on, everything else works fine. i've tried with a few custom roms but having the same prob with them. when i revert back to froyo 2.2.1 its ok.
ive searched all over google and on ere, a few people have had the same prob but the only solution i've found is using a app called automateit. But shouldnt it work without the need of this app
at the moment im using fla.sh custom rom. if i do the *#1234# i have
PDA: s5830xwkpn
PHONE: s5830xwkp6
CSC : NONE
apn settings for t-mobile
i flashed the rom from coderom 2
the problem is probably down to me, but have tried loads of stuff, from flashing just a csc file to checking and re checking apn settings and smsc number but still not able to text while 3g is on.
anybody know have any ideas thanks

anyone got a clue then. its doing my head in. think i narrowed it down to the modem file as i went back to stock froyo 2.2.1 which i can text while 3g is on and played around with csc files which no matter which one i chose as long as the apn settings were right i could still send a text.

fez1782 said:
anyone got a clue then. its doing my head in. think i narrowed it down to the modem file as i went back to stock froyo 2.2.1 which i can text while 3g is on and played around with csc files which no matter which one i chose as long as the apn settings were right i could still send a text.
Click to expand...
Click to collapse
Looking at the *#1234# thingy , how can you have NO csc ?
Infused with CM7 for Galaxy Ace using XDA App

not sure really. flashed from coderom v2 to fla.sh. i do the *#1234' on the fla.sh rom and its gone. so checked to see if i have a csc file using root exployer. and not one there. so god knows.
but the main problem i have is sending a sms while in 3g, its has happend on all the custom roms that i've tried. so as not alot of people have asked about it then it must be me.
for instance to get from stock froyo 2.2.1
PDA: S5830XWKB7
MODEM: S5830XXKB1
CSC: S5830OXXKB6
to coderom v1 using odin
BOOT: S5830XXKPH
PDA: PDACODEROM
MODEM: S5830XXKPH
CSC: S5830SERKPH
i simply fill all the required fields in odin with the corresponding ones from what i downloaded. apboot to boot, modem to modem ect. is that right?
turned off, insert sim and sd card. reboot then checked apn settings. go to send a text. text comes back as failed. turn data off and it sends.
flash back to stock froyo and it all works again. the only way around it that i've found is using automateit app.
THANKS

This is the same problem with T Mobile. I think it is to do with the CSC I can't find the XEU CSC anywhere.
Sent from my GT-S5830 using XDA App

Hi i have tryed the following XEU SER OXX and all fail while on 3G.. I to have been haunted by this.. Im on orange uk.. I also think it has somthing to do with the modem.. Maybe flashing the modem from froyo and the rest from gingerbread might fix it.. Only other this is if i put an o2 sim in i have no problems at all.. Seem only to bother orange & t-mobile as i think they are now the same..
Sent from my GT-S5830 using xda premium

i think it does have something to do with the modem. i have fla.sh rom running at the mo, which i flashed from coderom v2, did the *#1234' and had no csc code at all. realising from that the only rom, as i've tried a few now, that i have been able to send a sms while 3g has been on was the stock froyo 2.2.1.
so what i've done now is extracted the whole contents of the csc file with 7zip. copied them to my sd card. and using root explorer copied, SW_Configuration (HML) CSCVersion (text) and the csc (Folder) over to /system. rebooted the phone and *#1234# again and now i have a csc which is OXXKB6, which is the one that came with stock. checked by doing *#INFO*IMEI# and it already changed to XEU and now have a list of sales code.
GOT EXCITED AT THIS POINT haha
sent a text and within secs came back as fail.........
tried flashing just the modem but dosnt boot up after. thats if i'm doing it right
odin - ops (cooper) - PHONE (modem) then start.
now i've googled about having a TMU sales code which is T-MOBILE but as i've read you only need this if your phone is branded to T-MOBILE. as my phone is not then i cant seeing this working but will give a go.
is there a way of flashing just a modem. ?????

I dod the same just flashing the modem file and wouldnt boot ither.. I think you need to use all files while flashing.. Boot code csc from ginger and modem from froyo all as same time.. If it work im affrade the SOD would come back but not 100% on that..
Sent from my GT-S5830 using xda premium

no luck im afraid
this is what i've tried: -
stock rom ( S5830XWKB7 ) then flashing gingerbread ( S5830XXKP9 ) ( S5830XXKPH ) ( S5830XWKPT ) ( S5830XWKPKN ) each time starting of with stock rom but every time i flash to any gingerbread i'm unable to send a sms while 3g is on!!!!!!!
need help?????

Did you try flashing with the following files..
BOOT (Gingerbread)
PDA (Gingerbread)
MODEM (Froyo)
CSC (Gingerbread)
Or maybe..
I saw a thread for the orange uk gingerbread rom.. Mayby you could use the MODEM file (as tmobile & orange are the same now).. I will be trying this at some point soon..
Sent from my GT-S5830 using xda premium

Or maybe even extract the message apps from the stock orange gingerbread rom (only this that be an issue is that i think its polish)..
Sent from my GT-S5830 using xda premium

Not sure guys. This seem to be a problem for Virgin, T-mobile and Orange users in the UK using SGA with Gingerbread. These companies share networks too, yes? The Virgin Community (self help) has some input from VM staff that suggests that they are aware of the issue and that's why they haven't released GB themselves for SGA - not sure that it's as simple as a quick file replacement to resolve. Apologies if I'm wide of the mark here as I'm new to Android but I would have though that if it was a single file/apk that they would have resolved it quickly?

But what about the leaked polish gingerbread rom for orange.. Wouldnt that not work or are the freq different???
Sent from my GT-S5830 using xda premium

This was posted on the VM Community Forums yesterday on a thread about GB on SGA:
"I am still new to the phone but so far I have had no issues sending texts (getting use to conversation style sms),calling (call quality not as good as my older Tocco) or browsing.
I got the deal on two phones last Thursday and insisted they had the latest gingerbread version. On receipt of the phones I installed Kies and tried a firmware update and received the not supported message. Following firmware version was displayed:
PDA:KPU / PHONE:KP7 / CSC:KP1(VIR)
Without checking the phone itself I called virgin support and couldnt tell me when the firmware would be released -however just before I was about to send them back I checked the "about" on the phone itself and was pleasantly surprised.
The phone itself reports
android 2.3.3
baseband version S5830XWKP7
Kernel version 2.6.35.7-perf-CL48464 [email protected]#1
Build number GINGERBREAD.XWKPU
I had also looked into alternative ways to flash the firmware(odin) but I guess this means unless you want to risk bricking the phone folk have to wait for virgin to release it I'm afraid."

Samsung working on a fix.....
Orange have posted this on their site....
"Handsets that currently have Android Gingerbread installed on the device may be having problems sending SMS (Text) messages.
This issue has been highlighted and Samsung are currently working on a resolution which should be available next week (02/10/2011)
As a temporary fix you can follow the below instructions to change your handset from 3G to 2G only which will allow you to send text messages"
So - fingers crossed!

Yay about time..
Sent from my GT-S5830 using xda premium

z80dan said:
Orange have posted this on their site....
"Handsets that currently have Android Gingerbread installed on the device may be having problems sending SMS (Text) messages.
This issue has been highlighted and Samsung are currently working on a resolution which should be available next week (02/10/2011)
As a temporary fix you can follow the below instructions to change your handset from 3G to 2G only which will allow you to send text messages"
So - fingers crossed!
Click to expand...
Click to collapse
Any chance you could post the link so i can keep updated..
Thanks
Sent from my GT-S5830 using xda premium

aronfeerick said:
Any chance you could post the link so i can keep updated..
Thanks
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
No problem - I did try and post the link in my original post. Apparently i'm not allowed until i've done some more posts!
help.orange.co.uk/orangeuk/support/personal/554575/1/640437

+1 Thanks for the update... I was up the same creek paddless
Rince

Thanks!
I've installed the ROM mentioned in this thread (forum.xda-developers.com/showthread.php?t=1284947) and it appears, so far, to have sorted out this issue. AT LAST!

Related

[Q] CM 7.1 Text Messaging issue

Hey guys
I have installed CM 7.1 joo4 on my phone and everything seems to be working great.....Except I can only send short messages.
If I try to send a message bigger then 1 standard message it says message sending error and wont send till I bring the character count back to 1 message (160 I think it is)
Any ideas what's causing this guys. I'm to noob at this to figure it out.
Checked options under messaging and cant see anything that would affect it.
P.s Had no problems with messaging until I installed 7.1 j004 So I think its a silly problem.
Thanks in advance guys.
I might have found the answer (just realised I can search a thread, very handy)
I read if I check the SMS split in message options and send a message, then turn it off again it should fix the problem.
I'll update this thread when I get to test it properly tomorrow (its 22:30 here, time for bed) incase anyone else seems to be having this small issue.
Sent from my X10 using XDA Premium App
CM 7.1 J004
First, you need the correct baseband for custom ROMs. What baseband are you running, and who is your phone carrier? Baseband 2.1.65 is known to have this problem.
Basically what is happening is you cannot send mms, only sms. Long text are converted to mms.
I have AT&T and the APN settings circulated around the internet appear to be outdated for the X10 on 2.1 firmware. There are 2 APN's needed for correct mms settings.
Hey
Thanks for that info.
I'm using 2.0.52 (came with the Rom) My idea failed so I'm stuck.
Will check the web to see if I can maybe find the correct settings for the mms.
What you said makes perfect sense though agent. Thanks alot for that.
If anyone else can help or knows a fix, all help is aprciated.
Sent from my X10 using XDA Premium App. CM 7.1 J004
Basebands don't come with custom roms on the X10, because we don't have access to the kernel. You have to flash baseband yourself with the flash tool.
OK, that's odd...
I downloaded CM 7.1 j004 and the baseband folder was in the zip file.
It says for installation guide on the same page
"THIS ROM WILL WORK CORECTLY ONLY ON BASEBAND 52
even if you have baseband 52 reflash baseband included in this package or rom can be unstable"
It could be I have mistake the rom I used as a custom rom but I don't think I did.
Here is a link to the rom I used (though I'm sure your aware of it) http://forum.xda-developers.com/showthread.php?t=911364
thanks for the reply
You have to use the Flash Tool to flash baseband first, not xRecovery. Then install custom.zip with xRecovery. He even says to do a fresh flash of baseband 52.
Hey again.
I installed stock 2.1 again and reflashed the Rom using this guide: http://forum.xda-developers.com/showthread.php?t=939812
Still no joy. Thanks again though agent. Maybe I will have to live with it for now. I can split the message and then I can send long (but seperated) messages.
Thanks again mate. Much appreciated.
Sent from my X10i using XDA Premium App CM 7.1 J004
Could be your APN settings?
I think your right agent. You think it would help if I did a fresh install and the did a killall servicemanager in the cmd terminal?
Sent from my X10i using XDA Premium App
Who is your phone carrier?
Vodafone contract
Sent from my X10i using XDA Premium App
Its the baseband .52 issue
Heya guys
I looked around to see if there were any fixes for the baseband .52 issues and found that CM 7.1 has been updated from j004 to j005.
I installed the new version and it solved my problem. Now I just get WLOD when launching some apps which is nothing worth worrying about.
I'm seriously very grateful for your help guys. Problem might not have been solved by us but I learned alot in the process.
Hope this helps anyone else.
Thanks again people. Espically you agent. Very much appreciated.
HF people.
Sent from my X10 using XDA Premium App CM 7.1 j004

[Q] / [REQ]: Revert CSC / Three UK 2.3 NEEDED

Hi,
There is a new update released by my network, 2.3.4, i'm currently on their 2.3.3 KPN. I tried to use Kies and 'System Update' in Settings to update, hover i'm just given an error that it's not available on the phone, and Kies says this version of the software cannot be updated.
When I flashed CMW it seems to have changed my CSC to FOP, instead of H3G. Is there anyway I can revert to H3G? i've tried the *272 code* and it only has FOP available for selection? It should have H3G as im on their stock rom with all of their customizations. The only other way is if someone had the links to the H3G firmware? It seems extremely hard to find, does anyone know where it would be kept,
Thanks in Advance.
Jamie.
Just flash cm7 its android 2.3.7 the update never worked for me either so I flashed cm7
Sent from my GT-S5830 using xda premium
stevenc19 said:
Just flash cm7 its android 2.3.7 the update never worked for me either so I flashed cm7
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
I've tried it on my cousins Galaxy Ace, he's on O2. I love CM7, used it on my previous phone aswell. But I'm on Three, who have no coverage in my area, so I roam to Orange, and Orange seem to be restricting my speeds, it's GPRS, so it's slow enough without them slowing it down. Three's rom make it faster and more useable than CM7 does, my cousin is lucky because his is unlocked for all networks. and mine is locked to Three and so am I for the next two years. Woo.
Roll on July 2013 I guess
This could be for you.
http://forum.xda-developers.com/showthread.php?t=1268820
Sent from my GT-S5830 using xda premium

[Stock ROM] (H3G) Three UK 2.3.6 for ODIN

Thanks to 'cascader' I have used a program to extract the Stock ROM for our Three UK Galaxy Aces. Thanks again 'cascader'!
The zip file contains:
Cooper_v1.0.ops - Partition table etc. for the Ace ONLY
SS5570_Odin_Multi_Downloader_v4.38.exe - Odin 4.38 - To flash the firmware
S5830XWKT5_S5830H3GKT3_S5830NEKT2_HOME.tar.md5 - The firmware
SS_DL.dll - This file is used ONLY by Kies so is un-needed
This is a ONEPACKAGE file meaning you only need the cooper.ops file and the firmware to flash. If you do not know what you are doing - http://lmgtfy.com/?q=galaxy+ace+odin+onepackage+flash or http://yagyagaire.blogspot.com/2012/01/how-to-flash-official-stock-firmwares.html
Download link:
http://www.4shared.com/zip/TENhIZUN/GT-S5830_H3G_1_20111223114803.html?
I accept no responsibility for bricked phones. Thanks!
Jamie.
will i need to convert filesystem back from ext 4 or will flashing do this?
my phone was on O2 but after failed attempts at finding the firmware for it, i just stuck an unbranded stock from asia on there...works wonders
It has to be flashed by ODIN @PJ147 Use the included files for ODIN and the instructions from either link
@King Kaze - I was using UK XEU but it was only 2.3.3, This is 2.3.6 and includes Three's network tweaks which makes my 2G roaming a bit better, but completely useless still. I have to wait 2 minutes for 0.facebook.com to load on Opera! If I use Opera on any other phone on 2G m.facebook.com loads quickly. I'm thinking it's Three restricting how fast things can download/tx-rx on 2G, Their websites load alright in seconds... I asked them about this and they denied that they restrict speeds on 2G which makes me laugh.
0.facebook should load faster than all the other facebook sites because it barely has anything
Yeah, It should but Three restrict my 2G speed so it loads really slowly :L
Sent from my WT19i using XDA App
So Will This put My Ace Back To Stock 3uk Rom?
Installed Thank You
Can This Firmware Be Rooted?
Jaycs06 said:
So Will This put My Ace Back To Stock 3uk Rom?
Installed Thank You
Can This Firmware Be Rooted?
Click to expand...
Click to collapse
Yup I rooted it with the same rooting file i used for stock 2.3.3
Ok Cheers Rooted Quick Question Where Is The 3 Mobile Bootanimation Kept I Cant Find the Bootanimation Zip ? I Want To Save It And Use On Custom Roms I Instal
Thank you for posting this firmware, really helped me out.
Jaycs06 said:
Ok Cheers Rooted Quick Question Where Is The 3 Mobile Bootanimation Kept I Cant Find the Bootanimation Zip ? I Want To Save It And Use On Custom Roms I Instal
Click to expand...
Click to collapse
It should be /data/bootanimation.zip or something
Is this stock rom rooted? And if so, how do you go about unrooting it?
is better than DDKQ8?
@Swiftkilla - I don't know sorry, I regrettably got rid of the phone after I posted this so I didn't check
@kevo02 I don't recommend it for you. I see you're from Costa Rica and on 'ICE' - This rom is made by Three UK so I only recommend it on Three's phones. Sorry!
Note: I won't be checking this thread much, I don't really come on XDA and I sold my Galaxy Ace back in February I will still help though if you need anything
HI I tried doing everything like you said. It wont register on 3 network and when u dial it says mobile network unavailable, any advice would be good
King Kaze said:
my phone was on O2 but after failed attempts at finding the firmware for it, i just stuck an unbranded stock from asia on there...works wonders
Click to expand...
Click to collapse
Are you able to tell me which firmware you used? I'm like you and cannot seem to find any o2 firmwares anywhere on the internet, even though they are listed on their own website!
Is your IMEI still present? *#06# from dialer, should be 15/16 digit number
Sent from my Nexus 7 using XDA Premium HD app
dabby91 said:
Are you able to tell me which firmware you used? I'm like you and cannot seem to find any o2 firmwares anywhere on the internet, even though they are listed on their own website!
Click to expand...
Click to collapse
I would just use a generic stock firmware if I were you because its really hard to find them haha
Sent from my Nexus 7 using XDA Premium HD app
I know this thread is a little dusty, but the contents still apply . When I go to start the flashing in odin, it comes up saying "Please connect phones!!".
I have the latest Sammy USB drivers at hand and I'll try it again once installed, but in the mean time, have anybody else faced a similar issue?
I'm coming from this ROM
Thanks in advance
djdanster said:
I know this thread is a little dusty, but the contents still apply . When I go to start the flashing in odin, it comes up saying "Please connect phones!!".
I have the latest Sammy USB drivers at hand and I'll try it again once installed, but in the mean time, have anybody else faced a similar issue?
I'm coming from this ROM
Thanks in advance
Click to expand...
Click to collapse
bump!

[Q] Screwed up brand new SGS2 and a bit puzzled now

Hi all,
My gf got a new SGS2. It was branded with Play Poland and it was running v2.3.3 of Android.
I thought I would flash it to CM9 ICS nightly like mine (it was bought in France can't remember if it was branded or not).
I first flash the CM9 resurrection and then flash the same nightly as on my phone (20120524). But on her phone I had strange problems like wifi would connect but not get access to the internet (my SGS2 was fine on the same network), very low GSM signal etc. I thought it could be a modem issue so I flashed to LPS but nothing changed.
I eventually reflashed but with DarkyROM resurrection based on GGB KL1. In the installation infos thread (which I cannot link to because I dont have 8 posts), it said to use the .pit and the PDA, which I did.
Since then it is stuck on the black and white GT-i9100 screen with a yellow /!\ and won't boot into GGB anymore. I can get into download but not into recovery. Custom binary in download shows 2.
I don't want to aggravate the problem anymore and I don't know what to do now... I hate myself so much for not backing up the original ROM. I thought I wouldn't need to because there was no personal data on the phone. And now I don't know where to get a copy of the original branded image for the whole phone to bring it back to life.
Please advise.
It was bought in France and you didnt even check to make sure it was the I9100 international.
Take the back cover off, remove the battery and check the info.
Please please dont flash one custom rom on top of another custom rom when things are obviously going wrong.
Check out this thread and read a few more while your at it please.
http://forum.xda-developers.com/showthread.php?p=21493413
Sent from my GT-I9100 using Xparent ICS Blue Tapatalk 2
Should be ok
Download the stock firmware (there is a thread on this site for it) and flash using Odin on your PC. There are plenty of guides around for it. If you can get into download mode this should work.
bored_stupid said:
It was bought in France and you didnt even check to make sure it was the I9100 international.
Take the back cover off, remove the battery and check the info.
Please please dont flash one custom rom on top of another custom rom when things are obviously going wrong.
Check out this thread and read a few more while your at it please.
http://forum.xda-developers.com/showthread.php?p=21493413
Sent from my GT-I9100 using Xparent ICS Blue Tapatalk 2
Click to expand...
Click to collapse
My french SGS2 is fine, it's the Polish SGS2 that's having trouble.
There are no warnings regarding local versions and I assumed that a GT-I9100 was like any other one; one difference would be in the software hence my mistake. I was obviously wrong.
I thought that maybe the CSC didn't match (I didn't check before as I assumed all localisation was software) but couldn't do anything about it.
info sticker says (on both phones)
Model GT-I9100
SSN -I9100GSMH
FCC ID A3LGTI9100
---------- Post added at 12:35 AM ---------- Previous post was at 12:29 AM ----------
scayre32 said:
Download the stock firmware (there is a thread on this site for it) and flash using Odin on your PC. There are plenty of guides around for it. If you can get into download mode this should work.
Click to expand...
Click to collapse
I looked everywhere I could and didn't find the branded gingerbread 2.3.3 Play Poland firmware… Any suggestions?
---------- Post added at 12:56 AM ---------- Previous post was at 12:35 AM ----------
Looking back, I think the stupidest things was to go from branded gingerbread to custom ice cream sandwich and back to custom gingerbread (with .pit) because apparently you cannot go back and forth between GGB and ICS
I go back and forth between gb and ics all the time, no probz.. I never touch odin thou
Sent from my GT-I9100 using xda premium
@OP what comes to my mind is that you corrupted your efs folder content. That will require you sending your phone in.
Sent from my GT-I9100 using xda premium
I have had similar issue and told samsung it happend while i was updating. They emailed me a postage, had my phone back 2 weeks. But seems like it should not be a tough fix. I also go between gb and ics frequently and have no prob.
efs corruption sucks
I can't send it in, it has the yellow /!\ on boot and hangs on it...
If I flash a stock kernel, the /!\ will disappear and I can send it in maybe?
Hi,
There are several official firmware packages listed on this thread for Poland: http://forum.xda-developers.com/showthread.php?t=1075278
I did a quick scan, and found XXKE4, XXKF2, XXKG2, but it's a huge thread, so there are probably lots more.
The thread also has a good guide for flashing/rebuilding using ODIN.
Hope that helps.
Hmmm so with the help of a friend we managed to put it back on stock ICS XXLPB.
But I still have this weird radio bug. I have two phones sitting next to each other, on the same network.
The weird SGS2 has 1 bar and the other phone has full bars. Same goes for wifi, both SGS2 on the same network within 10 cm of each other.
They both get full reception but the weird SGS2 cannot access the internet or any other device on the network.
Although it has a correct IP and I can see it connected on the router.
I am at a complete loss.
You don't have to flash Poland firmware specifically. You can flash any stock firmware via Odin, choose the latest non-Frankenstein version. If you can get your phone into download mode, which you should be able to.
Sent from my GT-I9100 using Tapatalk 2
Wrong config in router caused the wifi mess. No idea why only the Polish SGS2 was affected.
All seems well now, its running CM9 nightly like mine and I'm proceeding to configuring it.
Thanks all for your help

[Q] Bought an used phone and don´t know what root.

Hi guys I am kind of new to this forum and really like all the website with so much information !
I am turning to you because because my friend wanted to buy an SGS 2 and bought one from some random guy whom he has no contact with.
The problem is now that the phone seems to be rooted because there is an yellow triangle that follows in the start up. I wonder if anyone knows how to see what kind of room is installed on the phone? I ask this because because the phone has been unlocked with the simunlock app but
the network connection is so bad, I´ve managed to make 1-2 calls to see that the phone works but i get max 1/5 bars in the connection barometer.
This made me think that maybe the root is bad performed by the guy that did flash the device from the begining.
If you guys have any kind of tweaks or ideas what to do I would really appreciate it.
I gathered some information that might help. This is taken from t he status menu in the galaxy S2.
Would it maybe help to restore everything to stock?
Ver 4.0.4
ground verision [email protected] s2 ics k3-31
smp
baseband 19100XXLQ6
clockworkmod 5.8.1.8
This is the Samsung Galaxy "NOTE" 2 forum, you would probably be best posting this in the Galaxy S2 forum... different devices!!!
Sent from my GT-N7100 using xda app-developers app
Sorry I choose the wrong section for my thread. Thanks to the MOD that moved it to the right one.
Root has no impact on signal strength.
But if you want to revert to stock, just download original firmware from http://sammobile.com/firmware, unpack and flash via Odin in PDA.
IvanTutic said:
maybe the root is bad performed by the guy that did flash the device from the begining.
If you guys have any kind of tweaks or ideas what to do I would really appreciate it.
Click to expand...
Click to collapse
The ROM you use has no effect on your signal strength. The modem however, does. So you can try flashing a new modem if you're fine with the ROM besides the signal problems. ie.the UI, features offered, etc. Else you can flash your stock firmware for your region and that would solve your problem
Sent from my GT-I9100 using xda app-developers app
Go to settings-wireless-mobile networks and in network mode check gsm only...if its on wcdma thats probably why u have poor signal
Sent from my GT-I9100 using xda app-developers app
Thanks a lot for the answers ! I´ve already tried to switch to gsm mode, dosn´t get any better. I will try to flash to a different modem but I have a few questions. Does it matter wich modem is current on my phone before i flash to another?
And if someone could point me in the right direction about wich modem I should use for my region, I live in sweden and use a swedish sim card and operator.
Does it matter wich modem is current on my phone before i flash to another?
Click to expand...
Click to collapse
No.
For Sweden I think it will be I9100XXLQ6.
If you got the phone from a totally unknown person, i would suggest to revert it back to complete stock, and then start making all the changes you want from scratch, just to be 100% safe.
I agree i´ll flash everything back to stock and start from the begining, I think it´s the best way. But 19100XXLQ6 is the modem that my phone says I have, does that mean that I´am on stock baseband?`Otherwise if someone could show me a link or something for a step to step guide of how to restore everything back to stock.
Thanks a lot for your help guys !
Look backup your efs folder before you start pissi g about with stuff.
Then go to that link and get a 4.0.3 stock firmware for your region.
Then come back here and you can be advised about like siyah kernel/nand backups/roms.

Categories

Resources