Hi,
I think in making this thread to discuss what is the optimal configuration for our beloved x10 minis/pros/x8
Best configuration, in my opinion, is when you can use the phone with maximum free memory(so, no lag), the maximun batery duration(so, no overclock and yes undervolt).
These options are completly harm free, if you dont like them you may just undo and be happy, no system files are harmed.
THESE WORKS ALSO WITH X8 and X10 mini pro. These three is the very same phone specs with diferente body shape.
The
Here is goes my configurations:
Cyanogenmod menu/ Performance.
CPU Configuration:
Governor Interactive X(it scales a lot the processor power, keepin it as mutch as possible in low frequencies without performance loss)
Undervolt Ticked
set on boot Ticked
Jit Ticked
allow purging of assets Ticked
Spare Parts program
Windows Animations FAST
Transition Animations FAST
Font Size EXTREMILY LARGE(im a bit blind, )
Programs That eat resources continuously
The is some of them bundled in rom.
I delete all, prefering programs that dont restart itself and eat the few phone resources.
Deleted:
DSP Manager
Gmail
Google Maps
Latitude
FOTA KILL (gOOGLE OVER THE AIR UPDATES)
Pico TTS (text to speech program/interface - if ypu arent blind u dont need it)
Voice Dial
Voice Search
Update:
Supercharger v8 Memory optimize script.
1 Download SCRIPT MANAGER FROM MARKET
2 Go to this thread and download SuPERCHARGER SCRIPT
3 Open program, load the script, Tick option run as ROOT.
4 in program dialog, type "1(fast)" and "enter"
5 In main Dialog, type "2" agressive one" and "enter"
6 Hit back button, click in run in background.
7DONE
Now i get a very Stable phone, fast as hell, with regulary 59mb free ram resources, no lag, batery lasting 1 day of heavy use and one day and a half of mediun use. BENCHMARK with ATUTU: 1608. As it should be.
link added to my FAQ, thx for this
any tests are welcome
what are these? Alow Resource Free Ticked, Set up in iniciation ticked ? i can't seem to find them.
Great tweak bdw
emmanuelcassar said:
what are these? Alow Resource Free Ticked, Set up in iniciation ticked ? i can't seem to find them.
Great tweak bdw
Click to expand...
Click to collapse
--> allow purging of assets
--> set on boot
pedrocel85 said:
Update:
Supercharger v8 Memory optimize script.
1 Download SCRIPT MANAGER FROM MARKET
2 Go to this thread and download SuPERCHARGER SCRIPT
3 Open program, load the script, Tick option set on boot. there's a problem here, in the original thread it is written run as root but DO NOT run this script at boot!!!
4 in program dialog, type "1(fast)" and "enter"
5 In main Dialog, type "2" agressive one" and "enter"
6 Hit back button, click in run in background.
7DONE
Click to expand...
Click to collapse
trying now... tests results tomorrow
please man, correct that and it will be fine
matmutant said:
trying now... tests results tomorrow
please man, correct that and it will be fine
Click to expand...
Click to collapse
I can not change the version of busybox!
Every time I make the change, it always returns the old value!
Is there a secret to it, or is it impossible?
Gustavo RD78 said:
I can not change the version of busybox!
Every time I make the change, it always returns the old value!
Is there a secret to it, or is it impossible?
Click to expand...
Click to collapse
I just did not try
everything worked ^^
matmutant said:
I just did not try
everything worked ^^
Click to expand...
Click to collapse
Sorry but my English is very bad! : s
Let's get this straight ...
... you also failed to change the busybox?
The description says the supercharger need busybox 1.18.2 or lower, because there may be errors, which are not errors.
I'll try to run the script with the version you have (1.19.1-static CM71)
Gustavo RD78 said:
Sorry but my English is very bad! : s
Let's get this straight ...
... you also failed to change the busybox?
The description says the supercharger need busybox 1.18.2 or lower, because there may be errors, which are not errors.
I'll try to run the script with the version you have (1.19.1-static CM71)
Click to expand...
Click to collapse
i'm using embedded busybox of CM7 2.1.1 by nAa and his kernel
(don't know which one but i don't care since it worked without any problem ^^)
matmutant said:
i'm using embedded busybox of CM7 2.1.1 by nAa and his kernel
(don't know which one but i don't care since it worked without any problem ^^)
Click to expand...
Click to collapse
worked! ! Thank's
Sent from my X10mini using Tapatalk
pedrocel85 said:
Update:
Supercharger v8 Memory optimize script.
1 Download SCRIPT MANAGER FROM MARKET
2 Go to this thread and download SuPERCHARGER SCRIPT
3 Open program, load the script, Tick option run as ROOT.
4 in program dialog, type "1(fast)" and "enter"
5 In main Dialog, type "2" agressive one" and "enter"
6 Hit back button, click in run in background.
7DONE
Click to expand...
Click to collapse
now your tut is great
something i do in a different way you did :
1 Download SCRIPT MANAGER FROM MARKET
2 Go to this thread and download SuPERCHARGER SCRIPT
3 Open program, load the script, Tick option run as ROOT.
4 in program dialog, type "1(fast)" and "enter"
5 In main Dialog, type "2" agressive one" and "enter"
6 type 17 (exit) and then "enter" -->at the top you see: running becoming exit code0
7 press "close" (it was "kill" while the script was running)
8 reboot
9 now your phone uses supercharger, you don't need to run it again
if you want to undo this :
1 run the cript
2 choose 1 (fast)
3 choose 14 (UnSuperCharger)
5 wait
6 type 17 (exit) and then "enter" -->at the top you see: running becoming exit code0
7 press "close" (it was "kill" while the script was running)
8 reboot
9 now your phone uses no more supercharger.
i don't know if it is a better way, but it's mine
[email protected]
the supercharge stick after reboot or did u use 98kernel?
ChavitoArg said:
the supercharge stick after reboot or did u use 98kernel?
Click to expand...
Click to collapse
It sticks after reboot. It will only go away if you undo or instal new rom.
ChavitoArg said:
the supercharge stick after reboot or did u use 98kernel?
Click to expand...
Click to collapse
here is the answer
matmutant said:
9 now your phone uses supercharger, you don't need to run it again
if you want to undo :
1 run the cript
2 choose 1 (fast)
3 choose 14 (UnSuperCharger)
5 wait
6 type 17 (exit) and then "enter" -->at the top you see: running becoming exit code0
7 press "close" (it was "kill" while the script was running)
8 reboot
9 now your phone uses no more supercharger.
Click to expand...
Click to collapse
maybe it wasn't so clear :S
matmutant said:
here is the answer
maybe it wasn't so clear :S
Click to expand...
Click to collapse
thanks for the sarcasm, lol. but before whit the old versions of MiniCM those values doesnt stick after the reboot-
ChavitoArg said:
thanks for the sarcasm, lol. but before whit the old versions of MiniCM those values doesnt stick after the reboot-
Click to expand...
Click to collapse
sorry
i didn't try with miniCM6 or with miniCM7 2.0.8 and before ^^
i didn't know that didn't stay after reboot
that wasn't really a sarcasm,
i know my english isn't so good, you could have not understood
ChavitoArg said:
thanks for the sarcasm, lol. but before whit the old versions of MiniCM those values doesnt stick after the reboot-
Click to expand...
Click to collapse
They do sticky.
Do a litle test over there.
Open script manager, aply agressive settings, wait, close program, reboot.
After a reboot, open program again.
You will see the OOM values you set will still be there.
best,
pedro
matmutant said:
sorry
i didn't try with miniCM6 or with miniCM7 2.0.8 and before ^^
i didn't know that didn't stay after reboot
that wasn't really a sarcasm,
i know my english isn't so good, you could have not understood
Click to expand...
Click to collapse
No problem men, i speak spanish btw
with te previous versions of MiniCM7 the values doesnt stick after reboot, you have to use 98kickasskernel script to make it work. Now works just running the V6 script, and the values stick
is it best to enable compache? what's the effect on the device?
emmanuelcassar said:
is it best to enable compache? what's the effect on the device?
Click to expand...
Click to collapse
compcache works only if you have nAa04 and miniCM7-2.1.2
it will increase RAM (virtually) but uses CPU to "zip-unzip" the data in the compcached RAM part
Related
These steps are intended for use on the stock Droid X2. I'm sure they will be close to the same on other phones, but if your phone is not a stock Droid X2, know that the steps may be different or you may get unfavorable results. Always backup anything you don't want to lose.
Before even considering this, READ ALL THE STEPS. Then READ IT AGAIN.
There are two tweaks recommended here: V6_Supercharger and SD Speed Increase.
Requirements for V6_Supercharger:
1. Rooted Phone (Gingerbreak 1.20)
2. Script Manager (free on Market)
3. BusyBox 1.18.2 or earlier
NOTE: I haven't confirmed the script works on 2.3.4... You may want to use the latest version of the script if you have 2.3.4
Installing/Using the script:
1. Install BusyBox. There are a number of ways to get this... it comes as part of Titanium Backup, for example. If you're not sure if you have it, or not, you can use BusyBox Installer (free on Market) to detect whether or not you have it and install it if you don't.
- Note: BusyBox Installer tells you which version you have installed on the main screen after it loads... it should be in a list that starts with "Your device is Rooted"
- Note: Make sure you don't install BusyBox 1.19 or anything newer than 1.18.2
2. Download the script. Save it in a place where you'll be able to find it.
3. Launch Script Manager and find the downloaded file (usually in /mnt/sdcard/download). Long-press no it and select rename, then delete the .txt from the end. You should have a file named "V6_SuperCharger_for_Android-update8.sh"... Press once on the script file to load it into Script Manager, check the 'Run as Root' box (DO NOT select "Run at Boot") and push "Run" to execute the script.
4. The script will run and ask for a speed. Touch anywhere on the screen to open your keyboard. Type 1 if this is your first time running the script, 0 if you're a fast reader or you are in a hurry. Next, it lists 17 options and gives an input prompt. Type 8 and push Enter. (This selects the called MegaRAM 1 preset, but feel free to try others, if you're so inclined)
5. Once script finishes, type 17 and push enter to end the script. Push the phone's Menu button and select 'exit' to return to the list of scripts.
6. Pushing the phone's Back button should bring you to a file browser. Push the '..' line (second from top) until the top line reads '/'.
7. Push the phone's Menu button, push 'More' and then 'Config'. Check the box 'Browse as root'. Push the phone's Back button to return to the file browser.
8. Browse to /data and select '99SuperCharger.sh' (This script was created by the first script and makes sure the settings from the first script are re-applied on boot)
9. Select both 'Run as root' and 'Run at boot'. Push 'Save' and then 'Run'. If it says "Exit code 0" at the top of the screen, the script ran successfully. Any other Exit codes should be reported.
10. Almost all the settings are now in place... but reboot your phone to get the last ones implemented.
11. After reboot, launch Script Manager and run V6_SuperCharger_for_Android-update8.sh (the first script). Select 0 at the first prompt, look for the current minfrees values... it should say "Launcher is HARD TO KILL!" and "Current minfrees = 6, 12, 40, 60, 80, 100". If the settings are correct, type 17 to exit and you are done. If not, re-read steps because you missed something.
Credit goes to Zeppelinrox, see this thread for more info on this script.
Requirements for SD Speed Increase:
1. Rooted Phone (Gingerbreak 1.20)
2. SD Speed Increase (free on Market)
Configuring SD Speed Increase:
1. Open the app and adjust the memory slider to 2048
2. Check 'Set on every reboot'
3. Push the red button
4. Reboot the phone
Advanced: 3G TurboCharge
- I'll post full step-by-step instructions soon, but for now, here are two more scripts from Zepplinrox that will boost 3G performance... (Forum Post) Run 3GTurboChargerInstaller.sh and 98KickAssKernelTweaksInstaller.sh once each (Hint: Don't forget to remove the .txt extension). The second script creates this boot script: /system/etc/init.d/98kickasskernel, so you will have use this thread to get init.d created (Side note: I haven't been able to get it to actually run the scripts that are placed in init.d... we're stuck with Script Manager for now). Run all scripts as root, obviously.
Questions, Comments & Corrections are welcome!
To Do:
Update SuperCharger to update7 (need to test it myself first)
Test and implement AutoStart script
Edit:
06/27/2011 - Removed ro.Home_app_adj tweak. It's handled by the SuperCharger script.
06/27/2011 - Updated SuperCharger script instructions to use v4 of the script.
07/14/2011 - Updated SuperCharger script instructions to use v5 of the script.
07/25/2011 - Added BusyBox requirement to the SuperCharger script.
07/25/2011 - Updated SuperCharger script instructions to use v8 of the script. Rewrote most steps for improved clarity.
08/19/2011 - Updated 3G and Kernel links.
Using it now... Cant see a major difference but I can tell some things are faster... and havent had any reason to kill any apps because the phone starts to get sluggish so IMO thats a major plus and a sign that it is working...
Oh yeah... use option 9! Megamemory device....
Sent from my DROID X2 using XDA App
alright so I did all the steps... but when i re-open it (step 10) it goes back to the original 1-3 menu. what did i do wrong?
falconfan101 said:
alright so I did all the steps... but when i re-open it (step 10) it goes back to the original 1-3 menu. what did i do wrong?
Click to expand...
Click to collapse
What does the script say those numbers mean?
The 1-3 settings are just setting the scroll speed of the text when the script runs. I personally like to set it to 1 (fastest) but it really doesn't matter. 3rd gives you a chance to read everything.
Works, like a charm, now if i wanted to get rid of it would it just be going back through the steps and undoing what i did?
slowz3r said:
Works, like a charm, now if i wanted to get rid of it would it just be going back through the steps and undoing what i did?
Click to expand...
Click to collapse
No, all you have to do is uninstall script manager and reboot. Deleting the scripts is optional.
Sent from my DROID X2 using XDA App
This script really made a big difference.
Great work, and there is no battery drain...
Sent from my DROID X2 using XDA Premium App
vvildcard said:
Before even considering this, READ ALL THE STEPS. Then READ IT AGAIN.
Requirements for V6_Supercharger:
1. Rooted Phone (Gingerbreak 1.20)
2. Script Manager (free on Market)
Installing/Using the script:
1. Download this ZIP and extract the script to your sdcard.
2. Load the V6_SuperCharger_for_Android-update4.sh script into Script Manager and check the 'Run as Root' box (DO NOT select "Run at Boot"). Push "Run" to execute the script.
3. The script will run and display a list of 16 options and a prompt. Touch anywhere on the screen to open your keyboard. Type 9 and push Enter. (This selects the option called MegaMemory Device)
4. Once script finishes, type 16 and push enter to end the script. Push the phone's Menu button and select 'exit' to return to the list of scripts.
5. Pushing the phone's Back button should bring you to a file browser. Push the '..' line (second from top) until the top line is '/'.
6. Push the phone's Menu button, push 'More' and then 'Config'. Check the box 'Browse as root'. Push the phone's Back button to return to the file browser.
7. Browse to /data and select '99SuperCharger.sh' (This script makes sure the other script runs on boot. Otherwise you would have to do steps 2-5 everytime you boot your phone)
8. Select both 'Run as root' and 'Run at boot'. Push 'Save' and then 'Run'. You will most likely see 2 errors at the end of the 99SuperCharger script... this is expected.
9. Reboot your phone, but you might already notice a significant difference in speed and zero redraws from your launcher.
10. After reboot, launch Script Manager and run the V6_SuperCharger_for_Android.sh script, but this time don't select any options just look at your current settings and make sure they are the same as the Step values you put in. Right under the list of options, it should say: 'NOTE: Current minfrees =' If they are correct, type 16 to exit and you are done. If not re-read steps because you missed something.
Credit goes to Zeppelinrox, see this thread for more info on this script.
These steps were posted a while ago on droidforums.net... you might run through the comments on that forum if you have any trouble and don't want to wait for a reply.
Click to expand...
Click to collapse
What are the values that it sets? I currently am running the V6 script and unless this is a newer version my option 9 is called "Gaming settings". At any rate I did option 10 and set values at 6,12,75,125,150,175. What does this set them to?
disregard my previous post. I ran it and found they are the same settings I have been using. Thanks for the updated script though.
is their a script dev thread where updated scripts are posted
THANK YOU!
I was about 10 mins away from calling VZW and telling them to take this back and send me my original X back... I wasn't able to get ANY Ver. of Pandora to play or even Slacker half the time. The complete phone would freeze ALL the time to the point I could not do anything unless I performed a Battery Pull to hard reset.
This fixed ALL my issues. I don't even have the 1-3 second wake delay I was experiencing before. So far so GREAT!! As I type I even realize that while Pandora is playing and the phone is charging it is not getting nearly as hot as it was before? I don't care why it's working better now, but I'm glad it is!
I can't wait until we can get a decent rom with these fixes already in place! I loved Liberty on my old X. I miss it!
A+++\
slowz3r said:
is their a script dev thread where updated scripts are posted
Click to expand...
Click to collapse
The end of the OP has the link.
This's pretty slick. While I haven't noticed huge gains in most areas, due to having cleaned and optimized my phone, the whole thing just seems to run with extra smoothness. Also, there's no more delay when waking the phone.
Sent from my DROID X2 using XDA App
I ran this script on my phone and couldn't be happier. Stock I'd get about 115mb ram free on ATK. After root and de-bloat I topped out at 170. After this script, 220+!!!
Sent from my DROID X2 using XDA App
This is a godsend!
Thanks for creating this thread and providing the most excellent script for memory mgmt. I've just installed it on my DX2 and boy, does it fly! I now see 130m+ memory free whereas before it would bounce between 50M-90M. Many thanks! I will run the remainder of this week and see if there are other impacts.
I do have one question, however, since I'm a newbie to all this: can I now remove the ATK application and disable the native Task Manager application with this script now in place? Or should I keep these as add'l failsafes?? Please advise and thanks for all the great info on this forum!
droid4ever said:
I do have one question, however, since I'm a newbie to all this: can I now remove the ATK application and disable the native Task Manager application with this script now in place? Or should I keep these as add'l failsafes?? Please advise and thanks for all the great info on this forum!
Click to expand...
Click to collapse
Try using Titanium Backup Pro to freeze these programs. I have both apps frozen, and my phone is fine
Sent from my rooted, supercharged Droid X² using XDA App
Does this increase benchmark scores at all? I know they don't mean anything but I think we can all agree, they're fun.
Also does this JUST manage memory or does it do other things as well?
Sent from my SCH-I500 using XDA Premium App
In my limited and completely amateur testing, there was no noticeable improvement in benchmarks... but I'm sure mileage will vary. You should seek out Zepplinrocks (the scripts writer) for a better answer.
I am sure this is a stupid question, but I'm a droid Newb. Is it nessicary to have the script manager app constantly running once you have already ran the script? Or is it good to go once I have exited it the last time? And after rooting, and running this script my weather widget keeps on saying i am in rockport il. And I'm not.... any suggestions?
When I click the Zip to download V6 on my phone it say "download unsuccessful"
And I have done these:
Requirements for V6_Supercharger:
1. Rooted Phone (Gingerbreak 1.20)
2. Script Manager (free on Market)
http://forum.xda-developers.com/showthread.php?t=991276&highlight=http://forum.xda-developers.com/+V6+SuperCharger!
http://forum.xda-developers.com/showthread.php?t=991276&highlight=[Script]+V6+SuperCharger!+HTK+%26amp%3B+BulletProof+Launchers!
I know quite a few roms that use this script.. That run awesome!!
I was hoping that more roms here would make use of it.
OmegaRED^ said:
http://forum.xda-developers.com/showthread.php?t=991276&highlight=http://forum.xda-developers.com/+V6+SuperCharger!
http://forum.xda-developers.com/showthread.php?t=991276&highlight=[Script]+V6+SuperCharger!+HTK+%26amp%3B+BulletProof+Launchers!
I know quite a few roms that use this script.. That run awesome!!
I was hoping that more roms here would make use of it.
Click to expand...
Click to collapse
I do use this script, and I can say that it is a success!
1.0.2 Using the MiniCM6 Nobodyatall!
One of the best roms in Big X10 xda land "Wolfbreaks" uses this.
I hope the roms here start using it... It rapes!
I must say.. this is works very well on my mini with MiniCM 2.0.5 GingerBread
Before: Active launcher and Zeam launcher is redraw everytime I finish to play NFS Shift or even after I open Application manager
After: No redraw (Active Launcher and Zeam) when finished playing Angry Birds, NFS Shift and other RAM eater games
Great ..
So I tried this script, and now my launcher is hard to kill / supercharged
but then after reboot it still says my launcher is hard to kill, but also that my prior minfrees don't match my current minfrees.
it then shows my curent minfrees as the default minfrees and the prior as what i selected. is that supposed to happen?
I mean exactly as the screenshot moedjs posted
like isn't it supposed to set current minfrees to what i selected, and not to default?
moedjs said:
I must say.. this is works very well on my mini with MiniCM 2.0.5 GingerBread
Before: Active launcher and Zeam launcher is redraw everytime I finish to play NFS Shift or even after I open Application manager
After: No redraw (Active Launcher and Zeam) when finished playing Angry Birds, NFS Shift and other RAM eater games
Great ..
Click to expand...
Click to collapse
Exactly.. makes multi tasking rock.. keeps the memory free, locks in the home app.
It works badass!
I did not understand the installation
ops , I did find a help, sorry
hey guys, does this works in SE android firmware 2.1?
Another question, in a tutorial it says :
P.S. When Installing Programs, MAKE SURE Script Manager are installed on PHONE and NOT in the MicroSD Card!
I have app2sd installed already , how can I do this? thanks
can someone who tried this give his values and his results?
sounds like a great tool
thnx in advance
I have the same problem as Carpe-Dimi above regarding new minfrees not sticking after reboot, although the Launcher is "Hard to kill".
I used option 6 in the script set up.
I followed help file advice to have Script Manager run /system/etc/init.d/99SuperCharger "at boot" and "as root" but problem persists.
Otherwise seems to work fine at keeping launcher in memory. I don't see any boost in Quadrant Score... or any other noticeable improvements to be honest.
MiniCM 7 is pretty good as it is
Any advice on settings or getting minfrees to stick?
Anyone know if it works on mini pro?
That number 1-17 is best for my phone?
alanllew said:
I have the same problem as Carpe-Dimi above regarding new minfrees not sticking after reboot, although the Launcher is "Hard to kill".
I used option 6 in the script set up.
I followed help file advice to have Script Manager run /system/etc/init.d/99SuperCharger "at boot" and "as root" but problem persists.
Otherwise seems to work fine at keeping launcher in memory. I don't see any boost in Quadrant Score... or any other noticeable improvements to be honest.
MiniCM 7 is pretty good as it is
Any advice on settings or getting minfrees to stick?
Click to expand...
Click to collapse
there are config files in the ramdisk.tar (can't remember name atm, but they are init.rc files) that have lines regarding the setting of ram optimizations.
however. these are definatley meant to do the same as the script, but the values in them don't correspond to the ones the script readsout, so I'm thinking another script runs on top of that which overrides those values again.
that's just a theory tho, since I can't edit the ramdisk file as I dunno how to set the permissions back when unpacking and repacking ramdisk.tar but I'll get back when I find out.
as for the launcher being bulletproof, that definately makes the home button respond a lot faster ^^
Carpe-Dimi said:
there are config files in the ramdisk.tar (can't remember name atm, but they are init.rc files) that have lines regarding the setting of ram optimizations.
however. these are definatley meant to do the same as the script, but the values in them don't correspond to the ones the script readsout, so I'm thinking another script runs on top of that which overrides those values again.
that's just a theory tho, since I can't edit the ramdisk file as I dunno how to set the permissions back when unpacking and repacking ramdisk.tar but I'll get back when I find out.
as for the launcher being bulletproof, that definately makes the home button respond a lot faster ^^
Click to expand...
Click to collapse
Somewhere in the original post it says that in some Custom Roms the minfrees won't stay after reboot so you HAVE TO select 'run at boot' for it to stay.
edit: From original post:
Note: For some reason, the minfree levels do not stick on some Custom ROMs. I don't know why this is. Maybe a bug in GingerBread?
........ You can check /res/user.log to see if it ran...
........ If this happens to you, use Script Manager to load /system/etc/init.d/99SuperCharger "on boot" and "run as root"
And I also have a question(just like the one 2 above)
What is the best one to choose (1-17)?
ThankYou
I tried:
'........ If this happens to you, use Script Manager to load /system/etc/init.d/99SuperCharger "on boot" and "run as root"'
and still could not get values to stick
Has anyone else tried this and had more luck?
how do you install this.. i could not understand
Carpe-Dimi said:
there are config files in the ramdisk.tar (can't remember name atm, but they are init.rc files) that have lines regarding the setting of ram optimizations.
however. these are definatley meant to do the same as the script, but the values in them don't correspond to the ones the script readsout, so I'm thinking another script runs on top of that which overrides those values again.
Click to expand...
Click to collapse
u r correct...the memory free settings are modified by some file not located in ram disk...i have examined the init.rc files and ramdisk settings are quiet different form the one that is set in the roms during runtime
now only if v knew what that file was!!!
The values are not equal with me, but I noticed a big improvement!
I am using the following values in the original 6,8,16,20,22,60 MiniCM6 Froyo!
It must have some kind of file it impossible values are equal, but it works it works!
I have done for mine and is awesome...
DareDan said:
I have done for mine and is awesome...
Click to expand...
Click to collapse
which values did you use?
please delete this post sorry
[FAQ] >> RBAP for miniCM7 by nAa, nAa's kernel X10mini/X8/x10miniPRO .: 03/12/2012 :.
Read Before Asking Please
FAQ for MiniCM7, nAa kernel, FXP (should be added soon) and any other custom rom maybe
reading may answer to lots of your questions !
for X10mini, X8 & x10miniPRO
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
since people do not pay attention at this FAQ linked in miniCM7 first post,
[*]i decided to create a new thread dedicated to Q&A about miniCM7 and nAa's kernel
this thread is the place of your questions, answers, tips about nAa's kernel and miniCM7 by nAa
so please, as usual, read FAQ, use search option or anything else before asking commonly answered questions
the FAQ will be incremented when needed
the Q&A are in random order
before all the Q&A below : one is most important :
in order to install miniCM7 2.1.X you NOW need :
- to read this upgrade guide
- to read that post
- to unlock your bootloader (see also here)
- to flash nAa's kernel for X10mini, for X8, for x10miniPRO
if not, you will brick your phone. -> read this then, that may help you : !!!!
--> i think it is still too small ...
something else that is useful to read before asking :
Here we (nearly all? XDA members, regardless of being devs or only users [like me], me at least ) don't care about your good/bad English the important is trying to be understood and to understand the content of the threads
only ask things you can't find, or you don't understand, please if you don't understand something in any process tell us exactly where is your problem : it will optimize the answer
sometime rephrasing things can make you understand better, feel free to help us for making the most understandable sentence for anybody
i'm always trying to use a proper English (not so easy for a non native English ^^)
but if there's something misunderstood because of my English your are welcome to correct me
BUT if you don't make the effort to read, I won't make the effort to answer (ok, you can't read everything... but read the minimum )
that's it
Instructions regarding miniCM7-2.1.X installation:
Download the latest all-in-one package from the release link that follows
Backup your /data contents: contacts, apps, sms, etc. or backup via recovery
Move the MiniCM7-xxx.zip to the root folder of your sdcard and rename it to update.zip. Optionally, download the suggested Google Apps for CM7 (check http://cmw.22aaf3.com/gapps/ if you want to experiment with other gapps versions)
Unlock your bootloader, if you haven't already, using the stuff in unlock/ folder. Check http://forum.xda-developers.com/showthread.php?t=1254225 for a nice tutorial
Flash the nAa kernel using Flashtool. To to this:
- Turn off your phone
- Start the Flashtool\X10FlashTool.exe and select Flash. Then select the E10_nAaxxx kernel firmware (this flashes both the kernel.sin and the loader.sin)
- Keep the back button pressed while connecting the usb cable. Flashtool should detect your phone and flash the kernel.
- Once done, disconnect the usb cable and power on the phone.
Once the logo appears, press the back button repeatedly to enter CWM4.x.
- Select 'backup and restore -> Backup'
- Select 'wipe data/factory reset' (SUGGESTED)
- Select 'apply update from sdcard'
- Flash gapps
Reboot (first boot will take ~2 mins)
Once your device has booted, you can navigate to CM Settings -> System -> Update notifications and select 'Register'. This way you can get update notifications on new versions of MiniCM7!
>>>IMPORTANT GUIDE FOR USERS WITH PERFORMANCE PROBLEMS. <<< by ronaldvalles, thx to him
miniCM website is now available
clic on the red text above Chatroom for support is now available
clic on the red text above
register, and then enjoy
tell your device's name, and the rom+kernel you are using________________________________
FAQ :
for miniCM9 refer to THIS THREAD PLEASE
for quick search, use ctrl+f and enter keyword, you should find an answer to your question
1/ I can’t see incoming call number, what can I do ?
Change CM Settings -> Lockscreen -> Style options -> Incoming call style choose sliding tabs
2/ my LED is not blinking properly is there any way to change that?
If you’re using miniCM 2.0.5 you must delete delete /system/lib/hw/lights.x10mini.so
If you’re using miniCM 2.0.6 & 2.0.7, 2.1.0,2.1.1, 2.1.2or2.1.3 you must delete /system/lib/hw/lights.robyn.so with rootexplorer or any other file manager that allows you to explore and modify root files
handcent led settings does not work properly with lights.robyn.so
of course, you need to reboot your phone after that.
then : After the restart, go to CyanogenMod settings/Interface/LED notifications/Advanced make sure everything is unchecked, select Reset and then reboot again.
of course, you need to reboot your phone after that.
also try this : go to CyanogenMod settings/Interface/LED notifications/Advanced then tick and untick "random colors" this may solve everything if not :
MarkMRL said:
By ticking and unticking everything a few times randomly, I probably triggered the random flag to update correctly, thus fixing the blinking color. Now I can select a color and have it blink normally.
Click to expand...
Click to collapse
you can"t delete the file? see q33/
REDELETE AFTER EACH UPDATE if you have the same problem SINCE THE FILE IS REWRITTEN
this Q/A2 is also True for all builds of MiniCM9 and 10
3/I want SE stock keyboard on this ROM !!
Just long press on any txt you’re typing on, “choose input method” then choose default input
4/ I’m already running an older version on miniCM7 (2.0.4 for example) do I have to perform a factory reset/ full wipe ?
There’s no need to factory reset in that case
you may have to perform this to avoid performance issue : here
5/ I’m already running an older version on miniCM6 (1.0.2 for example) do I have to perform a factory reset/ full wipe ?
Yes, absolutely, same as if you were under gingerDX, SE stock rom or any other non miniCM7 based. you will loose ALL your data that are on phone memory (sms/mms, contacts, calendar...) if you're sync to a google account, your contacts and calendar should be preserved
q4/ and q5/ : to upgrade from any version of miniCM below 2.1.X you need an unlocked bootloader, and to flash nAa's kernel !
all is explain in the first lines of this post
6/ how can I activate overclock or undervolt ?
Open CMsettings/performances/CPUsettings/ then tick overclock OR undervolt, undervolt is automatically activated with overclock.
Remember not to tick “set on boot” option if you’re trying frequenies upper than 710 that could make your phone unstable or being damaged.
for miniCM7 2.0.6 you also need to flash the module hotfix to see overclock/undervolt working
no need to install that for 2.0.7, see Q 16/
for nAa07+ and miniCM7-2.1.6+, Open CMsettings/performances/CPUsettings/,
Remember not to tick “set on boot” option if you’re trying frequenies upper than 710 that could make your phone unstable or being damaged.
Since OC is now embedded in kernel, no module to enable (so OC option disappeared!), if you want to OC only, just choose the freq, if you want to undervolt too, tick undervolt option !
7/ i'm actually using Xrecovery can i install miniCM7 directly ?
no, you can't, you first need to install clockworkmod recovery from the link given in the first post (put in on the root of your sd card, then reboot to recovery, "install custom zip", reboot : cwm recovery is now installed, you can flash this ROM )
8/ i can't download some apps from the market
download 'market enabler' and select T-mobile Usa as fake provider, then retry to search and download them. that should work
9/ random problems that are unknown for anyody?
reflash the rom, i.e. reinstall the rom zip trough recovery
&/or
first backup, then do a factory reset, or restart from the beginning, it could solve lots of problem (you will loose ALL your data that are on phone memory (sms/mms, contacts, calendar...) if you're sync to a google account, your contacts and calendar should be preserved)
you may have to perform this to avoid performance issue : here
10/ i own a X10miniPRO (u20i) does this ROM suites to this phone?
NO,No, and No this ROM is ONLY for X10mini (e10i/e10a) not for any other phone [a version is also available for X8, in the X8 section.]
edit : there is a version for minPRO available here so the ROM suites to X10mini, X8 and X10miniPRO in their respective version
11/ my battery is draining so fast ... what should i do ?
first calibrate your battery by fully charging your phone, then reboot into recovery, select Advanced/Wipe Battery Stats and then unplug and reboot
if there's no improvement so far
- see if there's app running always in the background
- look in CyanogenMod settings/Interface/LED notifications/Advanced make sure radom is not ticked
12/ i have installed minicm7 when i power on the phone it stuck on cyanogen 7 logo. what should i do.
does your phone comply to the conditions of the first post ?
if yes and if you can access to CWMrecovery, then reflash the rom and/or factory reset (you will loose ALL your data that are on phone memory (sms/mms, contacts, calendar...) if you're sync to a google account, your contacts and calendar should be preserved)
if not or if you can't access to CWM use Sony Ericsson Update Service to recover your phone as if it was out of the box (you will loose ALL your data that are on phone memory (sms/mms, contacts, calendar...) if you're sync to a google account, your contacts and calendar should be preserved)
13/ in the default input method, when i scroll down/up the "-,?,!,@,_ ..." & emoticons menu until it stops itself, the keyboard remains froozen
rotate your screen and this will be fixed, and don't scroll this violently
14/ app2SD and other features aren't working with 2.0.6, why is that?
for miniCM7 2.0.6 you also need to flash the module hotfix to see all the modules working (oc; uv; app2sd...)
15/
novicebg said:
The radio starts playing on speaker instead of on handsfree.
Click to expand...
Click to collapse
you may first need to choose speaker, and then handfree to route radio correctly (may happen each tile the radio is started...)
16/ i want to install 2.0.7, do I have to install hotfix from 2.0.6?
no you don't : each hotfix is specific of each version
"module hotfix" was for 2.0.6 not 2.0.7
17/ where are market, gmail and other google apps ????
you seem not have read carefully the first post : you need to flash gapps via CWM after flashing the ROM in order to use google services!
18/
mrozilla said:
With CM7 I need a ext partition? I have a standard 2GB card with the X10 MINI and I did not do anything with partitions, is that ok?
Click to expand...
Click to collapse
nAa's first post!!! said:
App2sd / Dalvik2sd compatible with 2.1 app2sd (storing to ext2/3/4 pre-existing partition is detected and mounted as such)
Gingerbread's native App2sd (storing to fat)
Click to expand...
Click to collapse
there is an app2sd storing to FAT feature.
so you don't need any ext partition
but if you have an ext partition on your SD, then it should be used automatically.
19/
hertell said:
Hi folks!
I have tried to find in this thread info on how to enable the sonyericsson version of android market, but i with no luck.
Click to expand...
Click to collapse
hertell said:
I reply to myself after getting help from matmutant.
I was looking for two different things: Getting the Sony Ericsson menu to the market, and enabling the Road Sync app that's free for SonyEricsson X10 mini users
To enable the SonyEricsson market, you need to edit the /system/build.prop file. Please be careful when you edit the file. If you mess up the file, you might get a phone that you can't boot (this can be fixed, cause i messed up a couple fo times I explain this later).
You can either just change the keys, or do like below: comment the old values with a # as the first char on the row, and write the new below.
Code:
#ro.com.google.clientidbase=android-google
ro.com.google.clientidbase=android-sonyericsson
ro.com.google.clientidbase.yt=android-sonyericsson
ro.com.google.clientidbase.am=android-sonyericsson
ro.com.google.clientidbase.vs=android-sonyericsson
ro.com.google.clientidbase.gmm=android-sonyericsson
For enabling the RoadSync app (or i guess any other app that want's to verify that it's running on a real SE-phone), then do these changes:
Code:
#ro.product.model=X10mini
#ro.product.brand=SE
#ro.product.name=robyn
#ro.product.device=robyn
#ro.product.board=robyn
ro.product.model=E10i
ro.product.brand=SEMC
ro.product.name=E10i_1237-0392
ro.product.device=SonyEricssonE10i
ro.product.board=delta
#ro.product.manufacturer=SE
ro.product.manufacturer=Sony Ericsson
As I mentioned earlier, i messed up the /system/build.prop file at one point. To get this fixed, i just rebootet into recoverymode, and mounted /system. After this i could use adb (found in the android-sdk) to copy back an corrected build.prop (./adb push build.prop /system/build.prop)
I had also an other issue with the android-market app. It crashed and got stuck a couple of times, so i fixed this by uninstalling the recent update from manage applications->All->Market.
I hope my changes don't break anything for the CM7, so please if you know that CM7 needs any of these keys i changed in build.prop, then please inform me
Click to expand...
Click to collapse
20/ i can't pull off the notification menu by pressing the bottom of the screen after opening notifications... only for 2.0.7 and previous builds!
it is somewhat hard to close notifications like this (sometime easy sometimes not.) just press back button and all would be fine
regarding 2.1.0+ and custom kernel :
my phone is laggy with 2.1.0 and crashes when screen goes off
it seems that on some phones, lockscreen is related to phone crash:
waiting for a fix,DustArma found a workaround :
DustArma said:
To everyone who has the lockscreen crashing problem, just disable it.
Go to Menu > Settings > CM Settings > Tablet tweaks > Disable lockscreen.
Now it won't freeze, but of course you won't have a lockscreen, that could be fixed by downloading a custom lockscreen from market though
Click to expand...
Click to collapse
DustArma said:
I can confirm that replacement Lockscreens from the market, such as WidgetLocker and Simply Lockscreen will work, so just follow my instructions to disable the lockscreen and then download a replacement one from the market, this will be a good enough workaround until nAa fixes the lockscreen reboot issue some of us are having.
Click to expand...
Click to collapse
---> reported to work. the phone won't freeze anymore, nor need reboots
BETTER WAY : flash miniCM7-2.1.1 that seems to fix the lock screen problem with carrier.
draco_ag said:
21/ I notced weird behaviour of CWM recovery tool.
In some options, e.g wipe cache/factory data or install zip from sdcard i receive otpions like this:
- No
- No
- No
- No
- No
- No
- Yes
- No
- No
Could You fix it please
Click to expand...
Click to collapse
DanielFran said:
This is normal with CWM 4.x, this is to avoid that by mistake you choose YES if it have only 2 options!?!
That way, if you really want to apply YES it will be because you really want....
Click to expand...
Click to collapse
22/ on 2.1.0 & 2.1.1 nAa kernel 02&03, at boot i don't have sony ericsson logo but a blue distorted image instead, is this normal?
bollitodecrema said:
Hi,
I've been loocking in the forum this problem but I can not find it. >>> answered 2000 times, even after the answer being added here.
After unlock the bootloader, when the phone startup show a worng image with blue lines before show the boot animation.
Click to expand...
Click to collapse
yes it is normal, this is a kernel bug, don't worry about that it has been fixed since nAa_kernel 04
when you see that thing it's time to press back button if you want to access recovery
23/ offline charging doesn't work, and my phone boots instead when i plug it to charge, why?
for 2.1.0, 2.1.1, 2.1.2, 2.1.3,2.1.4 & 2.1.5 there is no offline charging due to kernel+cwm (not implemented yet ?), as a result, the phone boots up
fixed with nAa kernel07+miniCM7-2.1.6 !
WestIsland said:
24/ "portable wi-fi hotspot" works fine.
while Charging it keeps connected.
However, when not on charge, the phone turns to sleep and disconnects
Is there a way not to make it keeping connected when idle ?
Click to expand...
Click to collapse
Aerobreaker said:
Settings > Wireless & networks > Wi-Fi settings > Click the left button and choose advanced > Wifi sleep policy > choose never ( i think u chose never when plugged in )
Click to expand...
Click to collapse
waiting for a better answer... this one doesn't change anything since wifi hotspot and wifi are unrelated
for now there is no good answer, this issue should be fixed later
25/ where can i find themes for my mini? (theme chooser themes...)
themes that are fully compatible with our mini are called LDPI so look for LDPI themes !!
here are some themes : pedrocel85 thread
sensified theme : NTsense
sony blue
sony green
CM9 like theme : by ronaldvalles
theme reference : here
flashable theme : black HTC --> WARNING : this destroys stocktheme of CM and takes place instead !!
26/ i'have some problem for sending mms (data enabled) --> with CM7 you just CANT send mms without data enabled
in that case :
DaRk_dOg said:
I think that this is a common issue with CM7 and not just MiniCM7 (I experienced it on my DHD too).
Here is a small workaround for now:
Before sending the mms, disable data traffic, then enable it again and then send your mms.
You have to do it every time, before an mms but it is working for me.
Regards, D_d
Click to expand...
Click to collapse
27/ i need to delete chargemon to boot up to the right recovery but :
arturos1996 said:
i deleted chargemon but cwm 4.x can't mount sdcard!!!! please help!!!!!!
Click to expand...
Click to collapse
--> reboot normally and press back button, do not use the software way of booting to recovery
also try to reboot with the hardware combination : power+back , and then back multipress
each reboot rebuild the chargemon
so each time it fails you need to redelete it
28/ for ext issue, read that :
rogeliodh said:
It is failing to mount sd-ext, script /etc/init.d/05mountsd is failing with:
I/mountsd ( 1160): /dev/block/mmcblk0 not ready, waiting 7 seconds...
I/mountsd ( 1164): /dev/block/mmcblk0 not ready, waiting 6 seconds...
I/mountsd ( 1168): /dev/block/mmcblk0 not ready, waiting 5 seconds...
I/mountsd ( 1172): /dev/block/mmcblk0 not ready, waiting 4 seconds...
I/mountsd ( 1176): /dev/block/mmcblk0 not ready, waiting 3 seconds...
I/mountsd ( 1180): /dev/block/mmcblk0 not ready, waiting 2 seconds...
I/mountsd ( 1184): /dev/block/mmcblk0 not ready, waiting 1 seconds...
E/mountsd ( 1189): SD not found (/dev/block/mmcblk0)
I added the following mknod lines to /etc/init.d/05mountsd:
#!/system/bin/sh
#
# mount ext[234] partition from sd card
mknod /dev/block/mmcblk0 b 179 0
mknod /dev/block/mmcblk0p1 b 179 1
mknod /dev/block/mmcblk0p2 b 179 2
BB="logwrapper busybox";
and it is working now
Click to expand...
Click to collapse
chicco said:
i modified the script and pushed it into the phone with adb: now everything is fixed!!!
this is a small guide:
download android sdk
download the fixed script and unzip it then copy it into the sdcard
launch a command line and To start the SDK Manager, please execute the program "tools/android"
./android
from the graphic menu install the platform tools
after the installal,go in the platform-tool directory and give theese commands
./adb remount
./adb shell
cp /sdcard 05mountsd /etc/init.d/05mountsd
then reboot the phone
now all apps in sd-ext partition are back!
Click to expand...
Click to collapse
here is the file >> direct link
here is the flashable zip (EASY INSTALL)
original fix
go there to thank them :
rogeliodh's post
chicco's post
maxadamo
29/ strange output while unlocking bootloader?
read this (may help you )
30/ after unlocking the BL, my no more recognize the SIM card... What should i do?
DarkestPriest said:
first, if you are not using stock ROM reflash stock ROM&kernel with SEUS then relock, re root etc ...
Click to expand...
Click to collapse
31/ CM native Screenshot doesnt work what can i do?
reboot once or twice
ChavitoArg said:
alternative (not validated for now)
with a root explorer app go to /system/app find CMScreenshot.apk ,
choose Install (replace) ,
system says trough a box: "APP not installed",
then Reboot and voila working again
Click to expand...
Click to collapse
32/ about miniCM7-2.1.2+ :
Kostas1601 said:
Guys I don't see the MIUI battery bar change...how do I apply it???
Click to expand...
Click to collapse
cm settings>interface>status bar tweaks>battery style? option "status bar".
33/ how to edit/delete stuff in /system using rootexplorer?
in the top of rootexplorer there is a button (mount r/w)
touch it, then it will say the /system is mounted as read/write and the button becomes (mount r/o) or something like that
you now can edit the files
34/ if you disabled the bootanimation, the first boot after applying update will seem to be VERY VERY VERY long with a black screen. don't be afraid
for 2.1.6+, when bootanimation is disabled, the kernel bootlogo is displayed instead, after a purple led blinking once
35/ can i apply update 2.1.3 without flashing nAa kernel05 ?
you shouldn't try, 2.1.3 is dependent to kernel05 !
36/ how do i enable USB tether?
settings > wireless and network > network sharing
37/ i've got an issue with SDcard : i can't install the rom since CWMrecovery says that sdcard cannot be mounted !
download sdcard formatter from here and format the sd
then copy/paste update and CWMrecovery should mount sd and install update successfully
(thx to r95)
37b/
Linkinsoldier said:
hi,
my wifi stopped working and i couldn't scan for any wifi!
Click to expand...
Click to collapse
Linkinsoldier said:
i removed my existing network and re-adding them solved the problem!
Click to expand...
Click to collapse
NEXT QUESTIONS ARE POST : #6
________________________
POST #3 : useful links, tweaks & thks
... read all this, again and again,
if this wont be stickied, I will lose hope in mankind
I MADE THIS ONLY FOR X10mini, THIS MAY BE COMPATIBLE WITH X8/X10miniPRO BUT NO TESTS HAVE BEEN PERFORMED YET
1somes usefull links will be added here :
flashtool (use 0.2.9.1)
Flastool last version
SEUS found in MIN thread by dr.norton
optimal config & supercharger (thread by Pedrocel85)
unlock how to
unlock how to 2
what is the use of priority for settings in setcpu?
summary for x10mini/pro
debrick your mini
last chance debrick
miniCM wallpaper by D_d
SD formatter
flashplayer for X10 mini (use the download link for armv6) use it at you OWN risk.
[how to] change X10mini battery
IMPORTANT GUIDE FOR USERS WITH PERFORMANCE PROBLEMS. >>> and here !
Stock kernel for X10 mini ! (not pro)
denoobing, reference and help for x10miniPRO (mimmi) thx to static28
themes that are fully compatible with our mini are called LDPI so look for LDPI themes !!
here are some themes : pedrocel85 thread
sensified theme : NTsense
sony blue
sony green
theme reference : here
...
___________________________________
(nearly)-Safe to remove apps :
yomiguy said:
here is my list:
(these first ones thanks to pedrocel and his optimal config thread)
DSP Manager
Gmail
Google Maps
Latitude
FOTA KILL (gOOGLE OVER THE AIR UPDATES)
Pico TTS (text to speech program/interface - if ypu arent blind u dont need it)
Voice Dial
Voice Search
(these others thanks to bojler in lets free up some memory thread)
androidian - 4MB - useless theme for me, which even isnt ldpi
browser - 320 kb - really bad browser, i use dolphin browser
calculator - i use realcalc
cmstats
cmupdatenotify useful if you want to be notified fr coming updates
cmwallpapers - 2,5MB
cyanbread - 3,6 MB also useless theme
dspmanager - always drains battery in background, and i really havent see any difference in playing music with it
email -1,5 MB - there are better alternatives
file manager - i use rootexplorer
latinime - 13 MB - i dont use this keyboard, its really too hard to use it on our devices, when you delete it, automatically is used standard multitap sony keyboard
livewallpapers - 3,8 MB if you dont use them you can delete this too
livewallpaperspicker you need it if you don't use quickpick ...
orangehaze - 1,7 MB - also, i don't use this theme
protips - that annoying android guy what is providing you tips on first boot after flashing
quicksearchbox 1,0 MB - i also dont use this, on mini pro, when opening keyboard on launcher, that search box launches.
soundrecorder - also, i use different apps for this purpose
genie widget
google books
weather and news (or newspapers, i dont remember the exact name)
an app called car home or something like that...
I think that's all
Click to expand...
Click to collapse
___________________________________
DaRk_dOg said:
Regards, D_d
Click to expand...
Click to collapse
___________________________________
Mrakoris/ said:
There is a demonstration of miniCM7)
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=-5-sxnx62-c
___________________________________
some tests about my config :
Dithering is enabled (wiki) so my performance may be lower than yours
values are reall unstable for each test;
if someone has some time to loose, he can make 10 tests for each settings
theses test have been made with an old version of miniCM7, will be updated later
ondemand
@ max691MHz
7.9MFLOPS
1659 antutu score
@ max600Hz (no UV, no OC)
7.6MFLOPS
1606 antutu score
smartass(v2)
@ max691MHz
8.1MFLOPS
1643 antutu score
@ max614MHz :
7.1MFLOPS
1517 antutu score
@ max600MHz (no OC, no UV)
7.5MFLOPS
1618 antutu score
interactiveX --> this cpu usage policy seems to be the best ratio atm
@ max691 MHz
7.1MFLOPS
1586 antutu score
@ max600MHz (no UV, no OC)
7.5MFLOPS
1550 antutu score
scary : with miniCM7 2.1.3
max CPU clock @691MHz
min CPU clock @122MHz
scary CPU governor
compcache disabled
JIT enabled
dithering enabled
transparency 16bits enabled
purging of assets (bitmap) diabled
home in RAm disabled
SMS/MMS in RAM disabled
VM heap size 32m
SDcard cache size 128kB
no tweaks like supercharged, OOM fixes, compache or anything else enabled
average score : 1782 (using antutu benchmark 2.4.1)
UPDATE:
antutu score : 2000!!@768MHz ondemand
(with no optimization add-on, all animations enabled, dithering, many apps installed and so on : this is not the optimal config for benchmarks...)
some more cool pics :
for more info : follow me on twitter
for battery life i use [email protected], undervolt enabled!
___________________________________
you want to switch quickly between a battery saving mode and performance??
here is a somewhat simple solution >>>> CPU/governor easy and quick switching
it allows you to switch min/max CPUclock, CPU governor and enabling disabling undervolt just by pressing one widget
___________________________________
supercharger optimization that can be usefull :
before updating to newer miniCM,
unsupercharge,
delete supercharger backups and
update to the new miniCM,
then resupercharge if you want
if you don't do that, you may experience some tricky problems if unsupercharging newer miniCM !
if you didn't, ofc don't complain about performance problem
SuperCharger v6 update9-RC1 ONLY for SuperCharger v6 update9 6.2.2 see the middle/end of this post!
first optimization:
1 Download SCRIPT MANAGER FROM MARKET
2 Go to this thread and download SuPERCHARGER SCRIPT 6 update9-RC1
3 Open program, load the script, Tick option run as ROOT.
in program dialog, type "1(fast)" and "enter"
4 answer properly to asked questions by the script !!
5 In main Dialog, type "4" "super UL (aggressive)" and "enter"
6 type 30 (exit) and then "enter" -->at the top you see: running becoming exit code0
7 press "close" (it was "kill" while the script was running)
8 reboot
9 now your phone uses supercharger, you don't need to run it again
another one that seems to be better for our phone (since miniCM7-2.1.3) :
another opti : (i tested and approve this to be somewhat working )
Gustavo RD78 said:
After many tests, I've found the best setting for my phone!
Use only grouping fixes OOM + bulletproof launcher script v6 supercharger, compcache kickasskernelizer standard 18% and tweaks!
The CPU is 600MHz!
I confess that I never had my phone as fast and as stable at the moment!
Back to share more news ...
Click to expand...
Click to collapse
1 Download SCRIPT MANAGER FROM MARKET
2 Go to this thread and download SuPERCHARGER SCRIPT 6 update9
3 Open program, load the script, Tick option run as ROOT.
4 in program dialog, type "1(fast)" and "enter"
5 In main Dialog, type "13" "OOM grouping fixes + bullet proof launcher" and "enter"
6 type 30 (exit) and then "enter" -->at the top you see: running becoming exit code0
7 press "close" (it was "kill" while the script was running)
8 reboot
9 now your phone uses supercharger, you don't need to run it again
then settings > CMsettings > performance > compcache > 18% ; reboot
do NOT use the two at the same time, i recommend the second for better results (at least it is better on my phone)
if you want to undo theses opti :
1 run the script
2 choose 1 (fast)
3 choose 15 (UnSuperCharger)
5 wait
6 type 30 (exit) and then "enter" -->at the top you see: running becoming exit code0
7 press "close" (it was "kill" while the script was running)
8 reboot
9 now your phone uses no more supercharger.
of course, if you have any comment about the tweaks, better tweaks or anything else (e.g comments about the way of introducing the process...), please tell me
____
third opti that yo may want to try :
Mischell53 said:
Good combination with:
Spare Parts program:
Windows Animations FAST
Transition Animations FAST and this script http://forum.xda-developers.com/showthread.php?t=1111145
Compcache 18%
Click to expand...
Click to collapse
___________________________________
things you might want to delete : (but why?)
jorz21 said:
More free space
with rootexplorer /system/usr/zi
delete the languages that you dont need.
system/usr/keyboard-config-languages-delete all languages that you dont need...
/system/fonts delete arabic(1.1mb)fallback(3.47mb)japannese(1.12mb)
/system/media/audio-delete all the sounds that you dont need..
Click to expand...
Click to collapse
___________________________________
Feel free to ask me about adding new answers, or anything that could be useful for users.
this thread is made for this
for my FAQ, i need to say thanks especially to :
Blagus
ChavitoArg
chicco
Dark_dog
Dettofatto
Doixanh
dr.norton
FrenchKoR
Gustavo RD78
Gx3
Linkinsoldier
maxadamo
Maxfron
Mrakoris/
NobodyAtall
Pedrocel85
pollob666
r3drogo
rogeliodh
ronaldvalles
Rooterdam
SpyderX
The_Laser
Yenkazu
yomiguy
...
for their help, their knowledge, or anything else they did that helped me to create this FAQ
and many many others that i can't remember (if i forget some names please notify )
i have done everything fine (unlocked bootloader and installed custom kernel) and made 2nd partition on SD card but when i open LINK2SD i`m getting trouble. sometimes it`s making script but after reboot i need to make script again and again. it can`t mount second partiton. what i have to do to get app2sd working?
Question ???
What is the best that I have to use a custom kernel? Thank you for your attention.
gallardo5 said:
i have done everything fine (unlocked bootloader and installed custom kernel) and made 2nd partition on SD card but when i open LINK2SD i`m getting trouble. sometimes it`s making script but after reboot i need to make script again and again. it can`t mount second partiton. what i have to do to get app2sd working?
Click to expand...
Click to collapse
from which rom did you upgrade ?
I don't really understand why do you use link2sd since this feature is embedded in the rom ...
you should better delete the content of the ext partition and use gb app2sd feature
______________________________________
FAQ second part since there's a max number of letters(...) per posts
38/
novicebg said:
The Sound icon on the Taskbar does not switch on and off the sound - it doesn't change the phone's state to silent, only vibrating, ringing or ringing with vibration. The other 3 icons work well - the BT, Wi-Fi and the GPS switch on and off with no problem, but the Sound and vibration... Why is that?
Click to expand...
Click to collapse
ronaldvalles said:
settings > CyanogenMod Settings > Interface > Notification widget status bar i.e option 2 ("gestion de alimentation" in French) , > widget buttons (i.e option7),
scroll nearly to the end to find sound (ring) modes,
tick the options you need, then accept
now it should work
Click to expand...
Click to collapse
if you have problem with any widget button try a similar solving way
39/ if you have any problem with flashing using flashtool, theses posts may help you :
original explanation by hakanyildiz
rephrased by alex_gm
40/ why do i have an annoying pop up asking for unlock key when i boot up my phone?
ferotakis said:
after little talk with one my friend we figure it out why in some provider is asking this code and in some not( like my case)
The reason is: This ROM is not legal I mean the original one from the Sony who before opening to users in theirs regions firs will be sent to operators , operators check it and then when you use for example Vodafone.de Vodafone.de if aprove the Sony ROM send a notification to users for a update is ON. When users updates their phone with the operator passed ROM they can be ''seen'' by the operator what type of phone with what type ot Android they are use and can send them auto setings like the APN MMS and etc.
If you want see the truelles of this just call your operator and ask them for auto APN . Try it if you have x10 mini with stock rom and with x10 mini with this one
In firs one operator say you : Ok i see in system you are using x10 mini vith android 2.1 i will send you the setings . But with this room she/he ask you what type of phone do you use bicoz I cant see it on system.
This is same wit the automated operator menus too : when you pres 4 (for example ) in voice menu and ask for a auto internet setings the autovoice say sorry we not support you phone yet will try again later.
This is not big deal for now bicoz the most of operators APN is already configuret but if you use operator who is not includet you cant use mobile data bicoz you not have APNs.
That is wy this code is asking for when you put some of providers sim some of them make theirs system in that way ... its more easy for them but for us is just annoing popup window
Click to expand...
Click to collapse
>>> thk him for this please
41/ how can i disable the network lock dialog after pin input? (miniCM7-2.1.5)
to disable the network lock dialog after pin input, add this line at the end of your build.prop (/system/build.prop)
Code:
ro.telephony.ril_skip_locked=true
then reboot
to re-enable change the value to "false", or delete the line
how to : use rootexplorer,
go to the right place,
then long press on the file,
choose "open in text editor" in the scrolling menu
and add the line at the end of the file
42/
TrissyGE said:
What are ETA´s?
Click to expand...
Click to collapse
phoneyericsson said:
ETA: Estimated Time of Arrival i.e. when something is expected to arrive/be finished.
Click to expand...
Click to collapse
43/
BééHach said:
i can't find my wifi network but some other are discovered by the phone, how to fix it?
Click to expand...
Click to collapse
Go to Settings > Wireless & Networks > Wi-Fi Settings and press the menu button.
Choose 'Advanced' and in the 'Regulatory domain' option, change the number of channels from 11 to 14.
44/ you feel wrong with autobrightness ?
maybe this can help you (i did not try, i prefer not to but instead of flashing blindly, open it and see what has changed )
45/ problem with google precache?
nussbaum said:
Hi to denlille and all others,
to get Google Maps Precache working with x10mini / e10i
edit your /system/build.prop and add
Code:
ro.opengles.version=131072
I added that line above ro.com.google.locationfeatures=1
- reboot after editing and maybe
- delete app data of maps
Here is the link of the thread i found it:
http://forum.xda-developers.com/showthread.php?t=1158183
Click to expand...
Click to collapse
46/ if you have a instable connection, you may read the following
ChavitoArg said:
Hi everyone, my 3g conection was really unstable and i delete this lines in build.prop:
ro.ril.hsxpa=2
ro.ril.gprsclass=10
ro.ril.hsupa.category=5
Now my data start inmediatly and the conection is stable again.
Ps: it may not work for all, because my 3g works on other freq bands.
Click to expand...
Click to collapse
ChavitoArg said:
47/ What is exactly WLOD? :?
Click to expand...
Click to collapse
it is the led that turns on in white when a kernel panic happens (unix's BSOD [Blue Screen Of Death that happens on windows when a critical hard/software error happens and needs the system to freeze to prevent a data loss)
White Led Of Death is meant to help to see from where comes the bug (i.e. if it comes from kernel : white led!)
some more precisions about the LED : here !
48/ concerning wifi, if it stops working at all, first try to delete wpa_supplicant.conf in data/misc/wifi or read Qs 24, 37b and 43
49/
Dualtouch:
If you want to enable the fake DT by dx (instead of andrej456's which is the default), you have to insert the following line in the /system/etc/hw_config.sh file:
insmod /system/lib/modules/synaptics_i2c_rmi4_dt.ko
If you want to remove the fake DT altogether, insert the following line in the /system/etc/hw_config.sh file:
insmod /system/lib/modules/synaptics_i2c_rmi4_no_dt.ko
aloy99 said:
50/ Hmm... So the new a2sd is essentially data2ext? Will I have problems upgrading as I'm on ext2, which is not supported?
Sent from my E10i using XDA App
Click to expand...
Click to collapse
nobodyAtall said:
Here's a brief explanation for A2SD/DC2SD/Swap:
A2SD/DC2SD only makes sense if you have /data that is over 200MB i.e. many apps.
Swap is useful if you need to run memory-hungry apps or wanna have more apps loaded in memory.
Any size for swap should be good depending on your needs (e.g. 128MB). To verify a2sd is loaded, run df via adb shell. It should show /data/app and /data/app-private mounted in /sd-ext.
Also /data/dalvik-cache should be mounted to /sd-ext/dalvik-cache if DC2SD is chosen.
To verify swap is used, try the command 'free' via adb shell.
None of the above are for the everyday/novice users. You have to know what you are doing.
Click to expand...
Click to collapse
51/ A2SD, WTF? (bis)
todonormal said:
explanation of http://forum.xda-developers.com/showthread.php?p=22505939#post22505939 for dummies:
A2SD
What is a2sd?
It's other metod to save applications in SD.
How prepare your SD?
In Windows: Use http://www.partitionwizard.com/free-partition-manager.html or other tool partition. Create a ext4 partition in your SD.
In Ubuntu: Use gparted for create ext4 partition
How activate? (thanks to ferotakis)
1. Format SD and partiton it with CWM on phone make yor ext part and swap if yo want swap ig not live it 0
2. Install minicm7
3. Go to CM seting under performance put the a2sd (first show none till reboot)
4. Go to CM then hit apps and tick the "allow app moving to external "
5. Open terminal and type free
6. Go to CM again then performance again then to a2sd and chek there must no say NONE and must be a2sd
7. Install some apps then rootexplorer and browse in root dir on your phone you will saw ext folder open it and look your apps will be there
8. Thanks again if you missed to NAa
9. Learn some Linux
10. Go outside and show your fr and bbf your amazing phone
Click to expand...
Click to collapse
Hey my friend,
Can you see if this thread is worty to enter en the FAQ.:
CM7 Configuration Thread:
http://forum.xda-developers.com/showthread.php?p=17714446#post17714446
best,
pedrocel85
pedrocel85 said:
Hey my friend,
Can you see if this thread is worty to enter en the FAQ.:
CM7 Configuration Thread:
http://forum.xda-developers.com/showthread.php?p=17714446#post17714446
best,
pedrocel85
Click to expand...
Click to collapse
of course i will
i'm currently testing some governors with or without OC/UV i'll post them later
matmutant said:
from which rom did you upgrade ?
I don't really understand why do you use link2sd since this feature is embedded in the rom ...
you should better delete the content of the ext partition and use gb app2sd feature
Click to expand...
Click to collapse
i updated from MiniCM7 2.0.7. and I want to use link2sd because i`m installing a lot of apps on the phone and i need them to still work when i`m mounting SD Card to the PC. i`m trying to make it work from about 3 days but still nothing
gallardo5 said:
i updated from MiniCM7 2.0.7. and I want to use link2sd because i`m installing a lot of apps on the phone and i need them to still work when i`m mounting SD Card to the PC. i`m trying to make it work from about 3 days but still nothing
Click to expand...
Click to collapse
but if you create an ext partition, it should be recognized by GB native app2sd... and you will be able to only mount fat part of your sd .. no?
matmutant said:
but if you create an ext partition, it should be recognized by GB native app2sd... and you will be able to only mount fat part of your sd .. no?
Click to expand...
Click to collapse
i moved GMail with native GB app2sd but when i`m mounting SD Card to PC GMail and another apps are stopping to work
edit: i`m not sure to which partition native GB app2sd is moving apps but i tried to do this with ext2,3,4 and FAT32 and it didn`t work with any of them
new links added
any request, questions&answers, etc... are awaited
matmutant said:
new links added
any request, questions&answers, etc... are awaited
Click to expand...
Click to collapse
maybe make a tutorial how to set the link2sd properly?? I think that will be usefull because some people have the same problem like me
gallardo5 said:
maybe make a tutorial how to set the link2sd properly?? I think that will be usefull because some people have the same problem like me
Click to expand...
Click to collapse
since i don't know the answer atm ... i can't
matmutant said:
since i don't know the answer atm ... i can't
Click to expand...
Click to collapse
awwww ok so I need to wait but it`s worth this. and by the way are you using link2sd on your phone?? if yes what type of partition are you using??
gallardo5 said:
awwww ok so I need to wait but it`s worth this. and by the way are you using link2sd on your phone?? if yes what type of partition are you using??
Click to expand...
Click to collapse
i'm using GBapp2sd storing to fat feature
so no partition, only one main partition on the sd card
matmutant, perfect!
Delete the question.
RoTiV- said:
matmutant, perfect!
Click to expand...
Click to collapse
you can try to posh the thank button if you think my work is worth the click
have a nice day
hey mat, check out this script, already added in my optimal configuration thread:
Supercharger v8 Memory optimize script.
1 Download SCRIPT MANAGER FROM MARKET
2 Go to this thread and download SuPERCHARGER SCRIPT
3 Open program, load the script, Tick option set on boot.
4 in program dialog, type "1(fast)" and "enter"
5 In main Dialog, type "2" agressive one" and "enter"
6 Hit back button, click in run in background.
7DONE
So I was searching around the Internet to find a way to make live wallpapers smoother. And I found a tutorial on another forum, tried it, and it worked like a charm, so I decided to post the tutorial on XDA Developers. Credits for this go to boimkun, a member of the Symbianize forum.
If you don't make to waste time on making the script, I have uploaded mine for you. Download the script
Requirements:
-Root access
-An application for making scripts (in this tutorial we are using GScript)
-Live wallpapers
Tutorial:
1. Open GScript
2. Click Menu, and then click "Add script"
3. Tick "Needs SU" if it's not ticked
4. Set the script name, and type in the text box below:
Code:
renice -15 `pgrep android.process.acore'
Note: "android.process.acore" stands for your launcher process name. You can use android.process.acore for ADW Launcher and Launcher Pro
5. Save the script and execute it
You must run the script on every boot.
Optional (I haven't tried this, but works very smooth without this as well):
boimkun said:
Maybe you want to try to renice the live wallpaper too (this may slow it down, I would not suggest to do it). To do this
- launch the terminal
- write 'ps' then press enter
- will appear a list of processes. here you should find one that has a name similar to the LWP you're using (for example, I'm using Pixel Zombies Infection and the process name is haydenTheAndroid.liveWallpaper.pixelZombies)
now you can renice it either from terminal or from GScript.
To renice from terminal:
- check the number *** which the process has in the PID row. You have to remember this number
- write 'su' then press enter. now you have root privileges
- write 'renice N ***' where N is the nice number you want (20=minimum priority ; -20=maximum priority, which you obviously don't want). You can set it to 20 to give the LWP the minimum priority
To renice from GScript go in the script you already created and add a similar line, by substituting "-15" with "20" and the process name with your LWP's process name.
You should now see an increased smoothness when scrolling homescreens and app drawer
Click to expand...
Click to collapse
That was all for this tutorial. Please post a comment, whether this script works for you or not.
It won't work alongside the loop smoothness tweak right?
Sent from my GT540
gonna try it out soon!!
yeah will this work along with the loopy and supercharger??
andreas__ said:
It won't work alongside the loop smoothness tweak right?
Sent from my GT540
Click to expand...
Click to collapse
I don't know about that, because I don't use that tweak. But you can try.
androidboss7 said:
gonna try it out soon!!
yeah will this work along with the loopy and supercharger??
Click to expand...
Click to collapse
It should, but I'm not sure. Try it, and you'll see.
despotovski01 said:
It should, but I'm not sure. Try it, and you'll see.
Click to expand...
Click to collapse
ok i will just for the fun of it!!
cause i dont really use live wallpapers!
i wanna try this utility it's easy to use??
Nirvanico said:
i wanna try this utility it's easy to use??
Click to expand...
Click to collapse
Yes, it's as easy as pie.
despotovski01 said:
Yes, it's as easy as pie.
Click to expand...
Click to collapse
hmmmm pie
just so u know. i put the command line in etc/init.d and give proper permission and the live wallpaper works really well.
though i only use multipicture live wallpaper but it loads automatically now after reboot and it scroll smoother.
I know there are a couple posts out there on how to fix this, but this is one of the most legitimate ways to fix the multitasking issue we have all come to know and hate on Android devices running Sense. If you don't want to install a whole new ROM, such as MEANROM, you don't have to! This is a small guide to using the V6 SuperCharger script by Zeppelinrox. I know the amount of steps seems like a lot, but it's really not that many. Most of the steps will be followed by just reading what you see on the screen and accepting the recommended option!
Zeppelinrox said:
What's it do?
It makes your phone FAST... super snappy with better multitasking!
It rearranges and fixes the OOM Groupings and Priorites and lowmemorykiller values.
So basically, it's a COMPLETE MEMORY MANAGEMENT FIX!
It's the ONLY one of it's kind
NO LAUNCHER REDRAWS, faster than ever, multitasking is better... why?
Because it works with the lowmemorykiller and letting it work the way it's meant to work.
Also, because of the rearrangement, it works the same on all roms!
The problem with using minfree tweakers like AMM or AKMO is that it doesn't work the same on all roms.
Secondary apps may be in slot 3 on some roms but in slot 5 in others!
That's why you hear people comment "I tried AKMO but it didn't do anything..."
Most likely it didn't do anything because the apps weren't sitting where they were expected to be.
So fasten your seat belts and enjoy the ride!
Click to expand...
Click to collapse
So, everything you need to know or want to know can be found at Zep's original thread here. There is a lot of information, and because he is so technical, I think that sometimes his instructions can be hard to read for some, so I thought I would put together a VERY SIMPLE GUIDE to give you guys a hand. You can find the best instructions from him under Installing/Using.
http://forum.xda-developers.com/showthread.php?t=991276
On to the instructions...
How To Use Supercharger
Please only proceed if you are rooted and have busybox
Download script manager from the market: https://play.google.com/store/apps/details?id=os.tools.scriptmanager&hl=en
Download zep's latest V6 Script (V6_SuperCharger_for_Android-Update9_RC11_Test_6.sh.pdf): http://forum.xda-developers.com/showpost.php?p=18703418&postcount=5021
remove the .pdf extension (should now end in .sh) and place on your phone /sdcard (you can use rom tool box or estrongs to rename the file)
At this point, I highly recommend you make a nandroid through TWRP or CWM. The script has a built-in undo feature, which works well, but I still think we all know this is best.
Open up Script manager on your phone. Make sure to check 'Browse as Root' Option
Navigate to the location wher you placed the V6 .sh script
Click the Skull/Crossbones to run as root. This should turn green. NOTE: DON'T USE THE BOOT OPTION
Hit Run
At this point, get ready for an onslaught of text. Don't be afraid and try your best to read even though much of it may not make sense!
You may be asked about your launcher. Answer the question correctly for your setup.
Any time you are asked to press Enter, go ahead and proceed. This is the last time I will tell you to hit Enter for most occasions.
Pick your scrolling speed. I recommend slow or normal the first time you do this, so you can keep up.
On the kernel panic screen, I recommend choosing the Rock(H)ard Option, so hit H and then enter
Accept the Misc and 3G tweaks by hitting Y
Feel free to keep or disable the annoying animation (the scrolling V6 at the beginning of the script)
Hit Y(es) for SuperMinFree Calculator settings. This is an automatic calculation. You can change this later when you get more confident. Many will choose the 1000HP option for our phone (based on available memory)
It will now backup your build.prop and some other system files.
ICS and newer Android services store a lot of the memory tweaks in services.jar. This script will now take you through an ICS patcher. Accept the Automatic Transmission. This will upload services.jar, and download the patched one.
It will eventually tell you that it needs to wipe your caches and restart. You will definitely want to do this. You will need to wait 4-5 minutes while it rebuilds your Dalvik Cache
Almost done! After your phone boots up and stabilizes, go back into Script Manager. Navigate to /data/99Supercharger script. Check the SU (skull/crossbones) and check the boot option.
Zepelinrox said:
- Stock ROMs - It also creates /data/99SuperCharger.sh which you can load up on boot (run as root) with Script Manager. The OOM groupings work as well since it happens on boot in local.prop or build.prop (18 entries added)
Click to expand...
Click to collapse
Reboot your phone and now your phone will run the supercharger script on startup. If you ever want to verify that your script is working, or if you want to mess with any of the extra options (including removal), run the original V6 shell script you downloaded as root, just like we did at the beginning. This will tell you if you are 100% optimized and give you a whole menu of options to play with!
I can actually open multiple apps now and go back to the first one without it having to reload. Waze is the best example. If I ever switched out and then back, it always had to reload...not anymore! Again, this all seems like a lot, but it's really pretty easy once you give it a shot!
Let me know if anything is unclear so that I can adjust this OP to help others.
Make sure to give Zep a 5 Star Rating in his OP and also give him thanks, he is the man!
Reserved just in case.
ok i need to correct you on one of your steps...DO NOT SELECT THE BOOT OPTION FOR THE SCRIPT. IT COULD CAUSE YOUR PHONE TO BOOT LOOP. only select run as root. it even tells you that on the guide that zeppelinx put in his thread.
edit: sorry for caps but i wanted to point this out before someone made this mistake
bog3nator said:
ok i need to correct you on one of your steps...DO NOT SELECT THE BOOT OPTION FOR THE SCRIPT. IT COULD CAUSE YOUR PHONE TO BOOT LOOP. only select run as root. it even tells you that on the guide that zeppelinx put in his thread.
edit: sorry for caps but i wanted to point this out before someone made this mistake
Click to expand...
Click to collapse
You have to run /data/99Supercharger as root and give it boot option or it won't be applied at boot. But you are right, if you are worried, you could just run it as root the first few times. I personally always set this one to boot as well. If you had to, you could always adb in recovery, and remove /data/Supercharger if you are having problems.
*EDIT
This is mostly a concern for ROMS/Kernels that utilize /etc/init.d but I will add this caveat to the OP
adma84 said:
You have to run /data/99Supercharger as root and give it boot option or it won't be applied at boot. But you are right, if you are worried, you could just run it as root the first few times. I personally always set this one to boot as well. If you had to, you could always adb in recovery, and remove /data/Supercharger if you are having problems.
*EDIT
This is mostly a concern for ROMS/Kernels that utilize /etc/init.d but I will add this caveat to the OP
Click to expand...
Click to collapse
if the rom uses init.d then the script will install a service to the init folder and it will auto load when then phone is restarted, no need to try and force it to run. also if it is a stock rom (with the script manager program) you can set the 99supercharger to run after boot as a task.
bog3nator said:
if the rom uses init.d then the script will install a service to the init folder and it will auto load when then phone is restarted, no need to try and force it to run. also if it is a stock rom (with the script manager program) you can set the 99supercharger to run after boot as a task.
Click to expand...
Click to collapse
What you are saying is exactly the point I made in the OP. Is this unclear? You should only ever run 99Supercharger on boot, not the original V6Supercharge Script. And yes, this is geared mostly towards stock users, who do not have init.d support and therefore need SManager to run the boot script for them.
adma84 said:
What you are saying is exactly the point I made in the OP. Is this unclear? You should only ever run 99Supercharger on boot, not the original V6Supercharge Script. And yes, this is geared mostly towards stock users, who do not have init.d support and therefore need SManager to run the boot script for them.
Click to expand...
Click to collapse
i understand what you are saying but the boot symbol next to the run ass root symbol in the script should not be checked. if you need it to run at boot the script manager program can do that for you, by setting up a scheduler when you reboot. after boot it will run the script but not during
p.s. let me re-read what you put so i am just not looking stupid lol. i think i need a nap
edit: yea if you need it to run at boot do it through the script manager program and set it up to schedule it to load the script after your phone is already booted to avoid any potential boot loops (but dont check the boot logo at the top left hang corner of the actual script itself
bog3nator said:
i understand what you are saying but the boot symbol next to the run ass root symbol in the script should not be checked. if you need it to run at boot the script manager program can do that for you, by setting up a scheduler when you reboot. after boot it will run the script but not during
p.s. let me re-read what you put so i am just not looking stupid lol. i think i need a nap
edit: yea if you need it to run at boot do it through the script manager program and set it up to schedule it to load the script after your phone is already booted to avoid any potential boot loops (but dont check the boot logo at the top left hang corner of the actual script itself
Click to expand...
Click to collapse
Can you post the steps to describe how you personally do boot scripts with SManager?
After Android starts up, it will send a boot intent to all apps registered to receive such an intent. This is where SManager is allowed to execute any scripts you have marked with the boot option. This happens much later than a traditional /etc/init.d start script, but is no less effective. Please let me know how you mark scripts as bootable and I can add that recommendation as well. Thanks.
adma84 said:
Can you post the steps to describe how you personally do boot scripts with SManager?
After Android starts up, it will send a boot intent to all apps registered to receive such an intent. This is where SManager is allowed to execute any scripts you have marked with the boot option. This happens much later than a traditional /etc/init.d start script, but is no less effective. Please let me know how you mark scripts as bootable and I can add that recommendation as well. Thanks.
Click to expand...
Click to collapse
1. open script manager
2. click menu
3. click more
4. click advanced options
5. click scheduler
6. click add new task
7. click select file
8. navigate to 99supercarger file the script created and click on it
9.you can from there click on boot (inside the file you just clicked on)
10. click save
it will boot the script after the phone is done booting, to prevent the possibility of boot looping. you can also create an event to do an engine flush however often you want (i do one at midnight everyday)
This gets executed at the same time during system boot as the method I mentioned. Both are valid. Thanks for the feedback!
Sent from my Nexus 7 using xda app-developers app
adma84 said:
This gets executed at the same time during system boot as the method I mentioned. Both are valid. Thanks for the feedback!
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
i thought you were saying click the boot thing during install ....i am sorry haha i got really tired all of a sudden and stuff wass getting jumbled together...
v6 works awesome though i have been using it for about 1 year now on this phone and my old evo
Also, for anyone that gives this a shot, please post back with your results!
Not to be "that guy" buuuut the effects of v6 at least from my experience with this phone (again fresh frombcustoms preorder release) the day i got it i was rooted and installed v6 because ive used it on all my prior evos since i found it probably right around when zep released lol...anyways on this phone its a strictly placebo effect and actually created more lag and launcher reloads...i was running the 1000hp option and tried the i believe 750hp whatever the one down from 1000 is anyways both of them gave me same results and once i removed the script all was good in the hood as they say lol...but if its working for yall then maybe zep fixed some ish for this problem and i didnt know about it...well this epic runon sentence is finished sorry for the length and useless points
Sent from the depths of hell
yea i also used it on my og evo and i just put it on last night again on this one, tried the 750 option and 1000 option. today at school my memory got so low it locked my phone, that never happened with mean rom and the tweaks he puts in. undoing the supercharge now.
Sorry everyone.
Sent from my Nexus 7 using xda app-developers app
adma84 said:
Sorry everyone.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
no thanks man for helping out, i just think this phone doesnt do well with it, and that may be because of how HTC changed the multitasking settings themselves. it may conflict with v6
Theres something up with it because its def just this phone because nothing solves it at all
Sent from the depths of hell
wileout said:
Theres something up with it because its def just this phone because nothing solves it at all
Sent from the depths of hell
Click to expand...
Click to collapse
I wonder if it's hard coded into sense somewhere
Sent from my EVO using xda app-developers app
bog3nator said:
I wonder if it's hard coded into sense somewhere
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Im thinking its sonething stupid like a character in the code is supposed to be one way and its mirrored the other way lol
Sent from the depths of hell
It's definitely helps with multitasking. I can keep apps open in the background much easier. Problem is that it chokes out the available ram for running apps, so it can make it feel sluggish. I think it's overtweaking the mem settings.