It disables the auto brightness yay. Unlock bootloaders do not update will brick ur plat.
should be in the general section. good man anyways
Hasn't this been live for a few days and there is already a thread on this in general.
Sent from my R800x using Tapatalk
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
for serial, it really bricks your phone! I had to get a replacement because of this crap. Do not do it...however, now that i got a replacement for that phone, i can say it is better. I dont know why i am still writing in caps. I am yelling the first sentence though. Take it seriously!!! @@@@@@@@@@@@@@@@@@@@@@@@@@@@@
doua27 said:
it disables the auto brightness yay. Unlock bootloaders do not update will brick ur plat.
Click to expand...
Click to collapse
Cubsfan3493 said:
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
for serial, it really bricks your phone! I had to get a replacement because of this crap. Do not do it...however, now that i got a replacement for that phone, i can say it is better. I dont know why i am still writing in caps. I am yelling the first sentence though. Take it seriously!!! @@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Click to expand...
Click to collapse
I forgot to relock and it did brick but following the UNBRICKING thread i got it back working. RELOCK bootloader then update then UNLOCK and REROOT all works fine now of course after root probably best to relock bootloader anyway just incase.
Post the ftf file please
Sent from my R800i using XDA App
Cat_On_Droid said:
Post the ftf file please
Sent from my R800i using XDA App
Click to expand...
Click to collapse
It's in the first post of the relock thread
Not the relock one, the 2.3.4 r800x ftf
Sent from my R800i using XDA App
Once we have an .ftf of the new 2.3.4 VZW OTA update we will be able to flash that via fastboot, and re-root while keeping our bootloader unlocked?
With flashtool not fastvoot, and yes
Sent from my R800i using XDA App
Yeah, flashtool. Haha.
So I relocked my bootoader, and now I want to unlock it again, it fail. I even tried to just use fastboot commands to boot into recovery and it comes back as
failed phone must be rooted." I did use flashtool to reflash back to stock r800x firmware 2.3.2 I dont know what it s going on. I have flashed my phone before and unlocked the bootloader but now it wont.
I relocked my bootlaoder to ota to 2.3.3. but decided to go back to 2.3.2. for the time being.
Any ideas why this is happening?
tried to unlock the bootloader and it fails everytime. Using fastboot commands for recoveryPLAY comes back with a "phone must be rooted" line.
Related
Can i unlock my atrix if i used the official att update is it safe i wanna flash a new rom i have the instructions how to just not sure if its safe i read all these people saying its not on some of these forums
Sent from my MB860 using XDA Premium App
Nobody wants too help me
Sent from my MB860 using XDA Premium App
http://forum.xda-developers.com/showthread.php?t=1154600
Yes, but when you flash pudding, you will get soft bricked (don't worry) you'll have 5 seconds to put your phone is fastboot mode, when done just continue the process and you should be fine. I unlocked on official 2.3.4, and I'm doing good
Sent from my MB860 using XDA App
http://forum.xda-developers.com/showthread.php?t=1182526&highlight=sbf+2.3.4
this thread has a ton of information on what to expect. I did it and its worked fine
mvolkhart said:
http://forum.xda-developers.com/showthread.php?t=1182526&highlight=sbf+2.3.4
this thread has a ton of information on what to expect. I did it and its worked fine
Click to expand...
Click to collapse
OP says "i used the official att update", so I'm assuming he's already on Gingerbread. No need to flash a full SBF just to unlock it then, and flashing full SBFs is no longer recommended except as a last resort.
Pudding.sbf is the way to go (just a megabyte), and here's the easiest way to do it:
Automatic bootloader UNLOCK/ROOT for AT&T 1.26/1.57/1.83/4.5.91
http://forum.xda-developers.com/showthread.php?t=1182871
OP, this is as safe as it gets. If you are already on GB then you will get a soft brick after the initial unlock attempt but mramirezusa script warns you of this and tells you exactly what to do about it. Just make sure that you have the latest Motorola USB drivers installed before you do any of this.
The script will unlock your phone, install a special ClockworkMod for Atrix 4G, and install su for root access. After this is all done you will want to apply any future updates via ClockworkMod in your phone's Fastboot menu. Don't mess around with SBFs unless you absolutely need to, and definitely do not apply an SBF for an earlier version of the phone's firmware or you will hard brick your phone.
Good luck!
Javi97100 said:
Yes, but when you flash pudding, you will get soft bricked (don't worry) you'll have 5 seconds to put your phone is fastboot mode, when done just continue the process and you should be fine. I unlocked on official 2.3.4, and I'm doing good
Click to expand...
Click to collapse
^^^ THIS ^^^
mramirezusa's script rocks.
Thanku man now I was scared to softbrick my phone so I used my older atrix that I have laying around I unlocked using that method but im on 4.1.26 now the prob im having is how to safley update to gb now without losing my unlock any ideas
Sent from my MB860 using XDA Premium App
For your 4.1.26 unlocked phone it would be easiest to just do the full 4.5.91 SBF with unlocked bootloader and /preinstall root as another poster suggested: http://forum.xda-developers.com/showthread.php?t=1182526&highlight=sbf+2.3.4
so i'm about to install 4.5.91 in a few hours.. gonna backup lots of data first..
im trying to avoid bootloader unlocking for the meanwhile cause of the warranty issue and the fact u cannot re-lock.
anyway i just grabbed ATT-2.3.4_Pudding_preroot.rar and ill flash it over the gladiatrix 1.8.3 i have currently on the device (will it work?)
later i intend to use the preroot method and root and of course.. install a recovery BUT.. since the new recovery needs an unlocked bootloader.. ill use the previous one with the battery charging hack
so.. what do you think guys? will it work?
p0xer said:
so i'm about to install 4.5.91 in a few hours.. gonna backup lots of data first..
im trying to avoid bootloader unlocking for the meanwhile cause of the warranty issue and the fact u cannot re-lock.
anyway i just grabbed ATT-2.3.4_Pudding_preroot.rar and ill flash it over the gladiatrix 1.8.3 i have currently on the device (will it work?)
later i intend to use the preroot method and root and of course.. install a recovery BUT.. since the new recovery needs an unlocked bootloader.. ill use the previous one with the battery charging hack
so.. what do you think guys? will it work?
Click to expand...
Click to collapse
I would assume the att-2.3.4_pudding_preroot already is preunlocked (hence the pudding) which defeats your purpose?
Also, what would the purposed of the old plugged in Recovery? It won't install any of the new ROMs and I don't think the nandroid back up really works that well.
not quite.. its just have the "pudding" in it.. you'll have to perform an unlock with fastboot to void warranty.
p0xer said:
not quite.. its just have the "pudding" in it.. you'll have to perform an unlock with fastboot to void warranty.
Click to expand...
Click to collapse
Ok, so the other question - point of the old recovery? Just to help you wipe data/cache/batterystats?
The old recovery will still save him... You shouldn't need to be unlocked to do that.
Mgamerz said:
The old recovery will still save him... You shouldn't need to be unlocked to do that.
Click to expand...
Click to collapse
save him from what and how? other than wiping data... he can't flash anything that can save him...
Indeed I think he can backup with old tenfar's recovery. The problem is that the sfb he wants to flash is the incorrect one, you can't use the prerooted without unlock the BL at least for the version I know. In other hand The update process is kinda complicated without unlocking the BL, if you do it OTA you will also update the BL and that one can't be unlocked now also could leave you bricked if flash back to 1.8.3.
Sent from my MB860 using XDA App
http://forum.xda-developers.com/showthread.php?t=1163342
gives stock 2.3.4 without touching bootloader.
you should be able to use preinstall method to root then i think.
He needs to unlock the BL to flash kennp image files.
Sent from my MB860 using XDA App
Kelvin0007 said:
He needs to unlock the BL to flash kennp image files.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
yeah my bad.
Hey guys.
Two days ago i have flashed back my SK17i to stock rom.
I updated from FOTA.
I didn't know i must relock bootloader before updating from FOTA, so i bricked my phone.
After 2 minutes of deep panic, i've flashed the relock .ftf file, but it won't work on phones unlocked with test point.
So, i found a way to relock bootloader and go back to stock. (On forums i didn't see any guide regarding the method to relock bootloaders unlocked by test point)
I've done in this way:
1) Flashed stock kernel
2) Flash the .ftf relock file
3) With S1Tool hit restore
The phone is now bootloader locked, without losing of DRM!
Sent from my SK17i using XDA App
could you please give more info about that i was unlocked my st18i and than i flash stock firmware with wolan server and than i rooted my device but i do not know how i can relock it. I tried flashtool and relock.ftf but the program can't see loader.bin it just saw preset.ta and i afraid to do that please help me to relock my phone...
xSiRiNx said:
could you please give more info about that i was unlocked my st18i and than i flash stock firmware with wolan server and than i rooted my device but i do not know how i can relock it. I tried flashtool and relock.ftf but the program can't see loader.bin it just saw preset.ta and i afraid to do that please help me to relock my phone...
Click to expand...
Click to collapse
How did you unlocked? Point test or software method?
Sent from my SK17i using XDA App
unlocked with the key method at official website but the main problem is flashtool program couldn't show the loader.sin it only saw preset.ta ido not understand why?
xSiRiNx said:
unlocked with the key method at official website but the main problem is flashtool program couldn't show the loader.sin it only saw preset.ta ido not understand why?
Click to expand...
Click to collapse
Did you tried to download the latest version of flashtool?
Also, try to re-download the ftf file from another mirror, you should able to relock bootloader.
Sent from my SK17i using XDA App
does it means with the bootloader locked using this method, we could update fota after that?
paijho158 said:
does it means with the bootloader locked using this method, we could update fota after that?
Click to expand...
Click to collapse
Yes, if you use this method, you can use fota!
(I used it)
Sent from my SK17i using XDA App
cappyt said:
yes, if you use this method, you can use fota!
(i used it)
sent from my sk17i using xda app
Click to expand...
Click to collapse
dont use fota update for test point method..for some works for some dosent..for me it wont work..use pc companion to update..its safe..
CappyT said:
Hey guys.
Two days ago i have flashed back my SK17i to stock rom.
I updated from FOTA.
I didn't know i must relock bootloader before updating from FOTA, so i bricked my phone.
After 2 minutes of deep panic, i've flashed the relock .ftf file, but it won't work on phones unlocked with test point.
So, i found a way to relock bootloader and go back to stock. (On forums i didn't see any guide regarding the method to relock bootloaders unlocked by test point)
I've done in this way:
1) Flashed stock kernel
2) Flash the .ftf relock file
3) With S1Tool hit restore
The phone is now bootloader locked, without losing of DRM!
Sent from my SK17i using XDA App
Click to expand...
Click to collapse
brov dont really understand dis, please break it down a little bit!
I just registered to confirm this method works. I foolishly allowed a FOTA yesterday and bricked my phone. It was unlocked via testpoint so the relock method didn't work, even though I tried it! I also tried flashing with S1tool with generic firmware and that didn't work. Then just out of curiousity/desperation I clicked on the RESTORE button in S1 and my phone actually started but was now locked again. I re-did the testpoint unlock this morning so now my phones fully updates and working with my SIM of choice.
I don't know if you need to do all the flashing as it may just be the RESTORE that does the trick. I definitely won't be allowing any OTA from now on. Lesson learned!
Just to confirm, so long as I do the update via PCCompanion or SEUS software I wont need to do all this?
Files to download please?
snaky90 said:
Files to download please?
Click to expand...
Click to collapse
What files?
If you unlocked your bootloader with test point, no need to flash anything, just press restore button in s1tool.
anyone tried this method to relock the bootloader which unlocked by test point method and still have the sim/network unlock
CappyT said:
Hey guys.
Two days ago i have flashed back my SK17i to stock rom.
I updated from FOTA.
I didn't know i must relock bootloader before updating from FOTA, so i bricked my phone.
After 2 minutes of deep panic, i've flashed the relock .ftf file, but it won't work on phones unlocked with test point.
So, i found a way to relock bootloader and go back to stock. (On forums i didn't see any guide regarding the method to relock bootloaders unlocked by test point)
I've done in this way:
1) Flashed stock kernel
2) Flash the .ftf relock file
3) With S1Tool hit restore
The phone is now bootloader locked, without losing of DRM!
Sent from my SK17i using XDA App
Click to expand...
Click to collapse
hey, what is ur method to unlock ur BL via paid version or free?
if free , can you access the fastboot mode??
Hey guys, i cant root my phone.
I just now reflashed my phone with FlashTool into 4.0.2.A.0.62 kernel 2.6.32.9.
And now i cant root my phone with DoomLord root with ZergRrush.
Can anyone help me?
Help yourself by searching, this is all explained many times.
Sent from my MT11i using Tapatalk
I tried this, but i doesnt found everything.
Sent from my MT15i using XDA Premium App
You can't root on fw .62! You must flash back to .42 (use wotanserver) and then root. After that, update your phone by OTA (on the air update) to .62!
Completely untrue. You can root - read the posts.
In a nutshell, because posters fail to bother to read everything:
Copy Rootxperia.zip to the SD card
Factory reset (don't format the SD card)
Use flashtool or Wotan to install your version of 0.62
Use fastboot to BOOT (not flash) recoveryNeo.img
When CWM boots, install Rootxperia.zip
Done
(CWM in this instance is hot booted, not "installed")
LenAsh said:
Completely untrue. You can root - read the posts.
In a nutshell, because posters fail to bother to read everything:
Copy Rootxperia.zip to the SD card
Factory reset (don't format the SD card)
Use flashtool or Wotan to install your version of 0.62
Use fastboot to BOOT (not flash) recoveryNeo.img
When CWM boots, install Rootxperia.zip
Done
(CWM in this instance is hot booted, not "installed")
Click to expand...
Click to collapse
This method works only with unlocked bootloader. By unlocking bootloader you loose warranty and some phones has no unlockable bootloader.
The OP has an unlocked bootloader... according to previous posts. My response reflects that.
Unlocking BL MAY affect your warranty... in practice highly unlikely.
Phones that cannot be unlocked are likely carrier locked which is a whole new moral ballgame. The desire to mess with these is dubious at best. Users intending to modify their phones should have unlocked carrier-free phones.
My phone carrier unlocked, but bootloader no
Sent from my MT15i using XDA Premium App
I prefer to reflash my phone to .42 but i cant use wotant, i need ftf firmware.
I cant find it.
Or if i find it is in japanese or chinese server, so download is very slow
Sent from my MT15i using XDA Premium App
why can't you use wotan server?
Also, if you be carefull and no scarry, unlock bootloader by tespin method (use link http://forum.xda-developers.com/showthread.php?t=1409269 ), then root (use link http://forum.xda-developers.com/showthread.php?t=1431033 ) and be sure to lock bootloader after that!
Lietotajs said:
and be sure to lock bootloader after that!
Click to expand...
Click to collapse
And why is that?
Madfysh said:
And why is that?
Click to expand...
Click to collapse
If you accidentaly update officaly firmware, for example, ICS will relise and you go update (with unoffically unlocked bootloader it is possible), you brick phone!
Lietotajs said:
If you accidentaly update officaly firmware, for example, ICS will relise and you go update (with unoffically unlocked bootloader it is possible), you brick phone!
Click to expand...
Click to collapse
Well, you see, I wouldn't agree with you
You know someone who did that?
OTA update brick phones with officially unlocked BL. Since the ones unlocked via test point can use all official tools(PCC, SEUS) I believe they can also use OTA, since their BL's are patched.
Also, how can you accidentally update it?
Madfysh said:
Well, you see, I wouldn't agree with you
You know someone who did that?
OTA update brick phones with officially unlocked BL. Since the ones unlocked via test point can use all official tools(PCC, SEUS) I believe they can also use OTA, since their BL's are patched.
Also, how can you accidentally update it?
Click to expand...
Click to collapse
With officaly unlocked bootloader OTA update not possible!
Some customers with unlocked boot loaders have experienced problems when they are accepting over the air upgrades (FOTA - Firmware upgrade Over The Air). For customers that have unlocked the boot loader, please do not accept any over the air upgrades. For additional information, check out the hints and tips from the community on the XDA forum.
Lietotajs said:
With officaly unlocked bootloader OTA update not possible!
Some customers with unlocked boot loaders have experienced problems when they are accepting over the air upgrades (FOTA - Firmware upgrade Over The Air). For customers that have unlocked the boot loader, please do not accept any over the air upgrades. For additional information, check out the hints and tips from the community on the XDA forum.
Click to expand...
Click to collapse
Yes, that is official statement for BL unlocked via official way. Since those phones can't use SEUS or PCC because those programs can realize someone messed with OS, but FOTA is dumb and can't realize that, so she still try that's when Mr. brick comes into town
Unofficially unlocked BL's can use SEUS and PCC so I believe they can also use FOTA. All brick's came from officially unlocked phones. I haven't heard any case where it happen with unofficially unlocked BL.
If you show me one example they I will change my way of thinking
Ok guys, i tried flash kernel .42 (ftf) but my phone still .62
I tried flash .42 broadband, but nothing.
What should i do with locked bl?
And without wotant, becouse my internet speed is extremely slow for this month.
Sent from my MT15i using XDA Premium App
jonke11 said:
Ok guys, i tried flash kernel .42 (ftf) but my phone still .62
I tried flash .42 broadband, but nothing.
What should i do with locked bl?
And without wotant, becouse my internet speed is extremely slow for this month.
Sent from my MT15i using XDA Premium App
Click to expand...
Click to collapse
By my opinoin the easiest way is to unlock the boot loader and then you can do what ever you want..otherwise I would recommand wotan..
everything is possible, almost then, but indeed you cant root 62, but if you downgrade to 42 do this: tick only wiping data & cache with flashtool, restart your phone and then you are on 42 not so hard to do it if you on unlocked bl, but i think thats already explained sorry for that then, but it must work i try it many times on my own phone and lock and unlock my bl to several times, so good luck with it.
Flashing original sony ericsson kernel dont need bl unlocked?
And can anyone upload .42 kernel here in ftf file?
Becouse where iam found its have same size as .62 kernel
Sent from my MT15i using XDA Premium App
I would like to add the "unlocked" that comes up when I turn on my phone since I would will have to send it in service! can someone help me pleas?
gianluca.tomat said:
I would like to add the "unlocked" that comes up when I turn on my phone since I would will have to send it in service! can someone help me pleas?
Click to expand...
Click to collapse
You can't. Also, what's with the two Qs in the thread title?
Is it not possible to put it back in its original state?
I have the original Orange 1.8gb sbf, can't it be done with this? I thought this would return it to its stock unrooted, unblocked state.
Sent from my MB680 w/tweaked blur rom.
jersonf said:
Is it not possible to put it back in its original state?
I have the original Orange 1.8gb sbf, can't it be done with this? I thought this would return it to its stock unrooted, unblocked state.
Sent from my MB680 w/tweaked blur rom.
Click to expand...
Click to collapse
If you flash a stock ROM (such as an SBF) that has the stock bootloader included the text will be gone and the bootloader will technically be locked. However, I'm pretty sure there's some sort of "fuse" inside that activates when the bootloader is unlocked. It will never revert to its original state.
This has discussed many times. The unlock bootloader actually burn the fuse permanently. If u flash a sbf, you will get the unlocked word removed, but technically the fuse still burned and can't revert back. Some call it software locked, hardware unlocked. Try search the thread about odm fuse. I did flash sbf to remove the unlock word in order to send it to motorola service centre to replace the digitizer. But flashing sbf might hard brick your phone.
Sent from my MB860 using xda app-developers app
Ok tnx for the answers, is it "safe" to flash a GB SBF, the only problem should come w/ FROYO FW right? Anyway it was just to make it appear locked, I know the fuse thing...
If you can, flash the latest version you can find. You will only hard brick your phone if you try to use RSD Lite to downgrade your phone.
jersonf said:
Is it not possible to put it back in its original state?
I have the original Orange 1.8gb sbf, can't it be done with this? I thought this would return it to its stock unrooted, unblocked state.
Sent from my MB680 w/tweaked blur rom.
Click to expand...
Click to collapse
Please would you be kind enough to upload the orange sbf ??
Sent from my MB860 using xda premium
If you hide it, its still unlocked right?
Sent from my MB860 using xda premium
DomeATRIX said:
If you hide it, its still unlocked right?
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Techinally its unlocked, but it may not work correctly with flashing Roms, kernels, etc. I have heard various reports of "unlocked" features not working correctly unless the unlock word is there.
I know it sounds fishy, but that's just what I've read on these boards over the last year.
Sent from my MB860 using xda app-developers app
ko_wei13 said:
This has discussed many times. The unlock bootloader actually burn the fuse permanently. If u flash a sbf, you will get the unlocked word removed, but technically the fuse still burned and can't revert back. Some call it software locked, hardware unlocked. Try search the thread about odm fuse. I did flash sbf to remove the unlock word in order to send it to motorola service centre to replace the digitizer. But flashing sbf might hard brick your phone.
Click to expand...
Click to collapse
This. Also, when he means "software locked, hardware unlocked", he means that the bootloader acts as if it was locked, but the fuse is still burned. It's unlocked, but you don't get any of the features that come from unlocking.
kyler084 said:
Please would you be kind enough to upload the orange sbf ??
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Got it from this link, it's not mine, it has the same md5 checksums as in the Atrix firmware superthread that were originally posted here on XDA.
http://www.4shared.com/archive/Azn21wCy/1FF-olympus_emara-user-234-452.html
Compression MD5 - 6603FA0BD5E4E3B254B664516E7F278C
SBF MD5 - DEB8E9165C20F2DFEF880D6D73164B12