[Q] HTC Evo View phone? - HTC Flyer, EVO View 4G

Hey guys, i thought i saw some time ago a way to be able to make and receive phone calls through the Sprint Evo View 4G? Am i right or was it the Flyer? now is this even possible at all?

I have made and received calls on my view using an app called grooveip.
Sent from my PG41200 using xda premium

shotguntheenforcer said:
I have made and received calls on my view using an app called grooveip.
Sent from my PG41200 using xda premium
Click to expand...
Click to collapse
Yes I am sure that works but i mean a native phone dialer like the Flyer(GSM) version? has anyone gotten this to work?

I don't believe so, Sprint disables voice on the network side, not handset side.

DevalB said:
I don't believe so, Sprint disables voice on the network side, not handset side.
Click to expand...
Click to collapse
Are you sure? While attempting to port an Evo View ROM to the 3D I came across a line in the build.prop mentioning the disabling of the dialer. I Don't remember exact syntax at the moment but we ended up changing that value on the port to get the dialer working for the 3D.
I thinks it's possible to the point that I think I'm going to try it sometime in the near future lol.

Well on my View I have the native phone dialer enabled with icon and everything. The phone doesn't connect to anything, however. It just vibrates like it's connecting and timer runs like I'm connected tho I'm not. Therefore, I just use grooveip for phone calls. This looks promising tho since the native dialer is there. But my pessimism is telling me that this is next to impossible due to voice being disabled on Sprints end as stated by a previous poster.

If I have just the data plan, then I only get data? I send and receive sms/mms just fine. Does Sprint offer a voice package for the View or one at least compatible?
EDIT:: I actually pay for unlimited SMS/MMS with my tablet plan. So ignore that part, but since messaging uses the same 1xRTT network as voice, I don't imagine it would be too hard to get voice working on this thing.

As far as I'm aware, the hard part of getting the View to make "native" phone calls, is the fact that the ESN for the device needs to be associated with the a plan that supports voice, and Sprint, as a corporate policy, won't do this. Whilst I suppose it is possible that a very, very friendly CSR could do this for you, I wouldn't like to bet on it.
Regards,
Dave

I believe the system blocks certain plans from being applied with certain ESNs. Things were different before I believe but not now.

I did manage to get a phone call out from my view to my 3d. As soon as i answered it on my 3d both lines disconnected. If I were a gambling man, which I am, I'd say you guys are correct in the no calls to/from a tablet on Sprint.
My only remaining questions are why? The device is capable of sms and if I'm not mistaken still uses 1xRTT which is also what voice calls use?

mbobino said:
I did manage to get a phone call out from my view to my 3d. As soon as i answered it on my 3d both lines disconnected. If I were a gambling man, which I am, I'd say you guys are correct in the no calls to/from a tablet on Sprint.
My only remaining questions are why? The device is capable of sms and if I'm not mistaken still uses 1xRTT which is also what voice calls use?
Click to expand...
Click to collapse
That's a good question, but I'm getting the majority of the folks who would use this device wouldn't want a 7" phone

DevalB said:
That's a good question, but I'm getting the majority of the folks who would use this device wouldn't want a 7" phone
Click to expand...
Click to collapse
Well, I bought the device for a 20$/mo 7" phone, and I love it.
The reason sprint won't let you use voice is because they don't want the secret to get out that in reality you only need one PIPE (ie data plan) to do everything you need... they love selling you a 40$/mo voice plan.
Think about how LITTLE you use the phone (even if you use it a lot it doesn't cost as much as data) and think that they basically charge the same amount for the voice as for the data, on a standard smart phone.
Great cost/benefit ratio...

I really hate how you guys make so much sense... It really does suck though that if my 3d dies that I can't make a call from my view. I might call sprint and see if they can just share my minutes between both lines. I use a whopping 3 a month total.
Sent from my PG86100 using Tapatalk

I'm using a View Port on my Evo 4g. Im using Dailer one.

Ok guys i got calls outgoing on my view an it works wel through a bluetooth headset. Im not using it on sprint. Anyone interested PM me. But i can't get calls to come into the device. When people call me it rings about 5 times then it goes into voicemail.

Ostthug2k said:
Ok guys i got calls outgoing on my view an it works wel through a bluetooth headset. Im not using it on sprint. Anyone interested PM me. But i can't get calls to come into the device. When people call me it rings about 5 times then it goes into voicemail.
Click to expand...
Click to collapse
Does it really work well? Whenever I use bt i get very delayed and crackling voice... I can hear about 30% of what is said through all the crackling. It is unusable...
I followed the build.prop in the guide... any ideas?

sdge said:
Does it really work well? Whenever I use bt i get very delayed and crackling voice... I can hear about 30% of what is said through all the crackling. It is unusable...
I followed the build.prop in the guide... any ideas?
Click to expand...
Click to collapse
Mine works perfect,? sounds great! Are you using the native Dialer, or grooveip?
Im using the native phone app. But i cant receive incoming calls. Do you receive incoming calls?

sdge said:
Does it really work well? Whenever I use bt i get very delayed and crackling voice... I can hear about 30% of what is said through all the crackling. It is unusable...
I followed the build.prop in the guide... any ideas?
Click to expand...
Click to collapse
I called Sprint yesterday or the day before because I was having connectivity issues which gave me an idea. The Sprint reps (all 7 of them) had no idea that the Evo View was a tablet, they kept telling me to go into the dialer and dial in EPST codes and stuff which I kept telling them was impossible since I didn't have a "Phone" app to get to the dialer from. I finally got someone who did realize that the dialer is inaccessible because its a tablet and not a phone and told me to use the dialer codes in the calculator app substituting hash/pound/# for exclamation/!
My idea being, with CDMA Workshop/QPST/EPST you should be able to swap ESN's (illegal as hell so I don't recommend it nor will I share how to do it) and get the tablet up on the voice network.
As for the quote above, with your view in landscape, open the calculator and type in !!3282! = and you should get EPST. You will need your MSL code! It'll ask you for View Mode and Edit mode to which you'll want to edit the settings. Go to Advanced and make the following changes::
- EVRC-B from Disabled to Enabled
- Home Orig from EVRC to EVRC-B
- Roam Orig from EVRC to EVRC-B
What this will do is change the voice codec (kinda like .mp3 or .wma) for your incoming and outgoing voice quality to one that is newer, has better compression, and has better quality (Almost like the difference between .mpeg and .mp4).
All of this is based on my knowledge of CDMA Android phones. I'm not 100% that it will work on the view at all as mine isn't in front of me at the moment. Also, just to be safe, I'm not liable for damages if you screw up your phone. It's very easy to revert the settings back to factory defaults and doesn't require a full device wipe. I just don't remember the dialer code.
Anyways, best of luck to you in getting this working. I'm taking a break from the view (I really want Honeycomb but I'm too scared to flash radio.img and hboot.img to try and get it working) to work on my Evo 3D projects. I'll still be lurking though so I'm not gone for good. The View needs some more devs and hopefully I'll have something I like on my 3D enough to stick with it for a while.

mbobino said:
I called Sprint yesterday or the day before because I was having connectivity issues which gave me an idea. The Sprint reps (all 7 of them) had no idea that the Evo View was a tablet, they kept telling me to go into the dialer and dial in EPST codes and stuff which I kept telling them was impossible since I didn't have a "Phone" app to get to the dialer from. I finally got someone who did realize that the dialer is inaccessible because its a tablet and not a phone and told me to use the dialer codes in the calculator app substituting hash/pound/# for exclamation/!
My idea being, with CDMA Workshop/QPST/EPST you should be able to swap ESN's (illegal as hell so I don't recommend it nor will I share how to do it) and get the tablet up on the voice network.
As for the quote above, with your view in landscape, open the calculator and type in !!3282! = and you should get EPST. You will need your MSL code! It'll ask you for View Mode and Edit mode to which you'll want to edit the settings. Go to Advanced and make the following changes::
- EVRC-B from Disabled to Enabled
- Home Orig from EVRC to EVRC-B
- Roam Orig from EVRC to EVRC-B
What this will do is change the voice codec (kinda like .mp3 or .wma) for your incoming and outgoing voice quality to one that is newer, has better compression, and has better quality (Almost like the difference between .mpeg and .mp4).
All of this is based on my knowledge of CDMA Android phones. I'm not 100% that it will work on the view at all as mine isn't in front of me at the moment. Also, just to be safe, I'm not liable for damages if you screw up your phone. It's very easy to revert the settings back to factory defaults and doesn't require a full device wipe. I just don't remember the dialer code.
Anyways, best of luck to you in getting this working. I'm taking a break from the view (I really want Honeycomb but I'm too scared to flash radio.img and hboot.img to try and get it working) to work on my Evo 3D projects. I'll still be lurking though so I'm not gone for good. The View needs some more devs and hopefully I'll have something I like on my 3D enough to stick with it for a while.
Click to expand...
Click to collapse
I did this on my View, but can only get Calls out, cannot get calls to come in while tab is idle or not in a call. If some one would look into the phone app. I'm sure we could fix it.

sdge said:
Well, I bought the device for a 20$/mo 7" phone, and I love it.
The reason sprint won't let you use voice is because they don't want the secret to get out that in reality you only need one PIPE (ie data plan) to do everything you need... they love selling you a 40$/mo voice plan.
Think about how LITTLE you use the phone (even if you use it a lot it doesn't cost as much as data) and think that they basically charge the same amount for the voice as for the data, on a standard smart phone.
Great cost/benefit ratio...
Click to expand...
Click to collapse
Don't get me wrong, I love it too!

Related

[Q] Making phone calls with the galaxy tab 10.1v??

Hello guys,
does anybody knows how to make phone calls with the samsung GT-P7100 galaxy tab 10.1v? got my simcard in it and dont know how to call, sending smses, and how to get all my contacts on my tab wich one i got on my simcard?? are there any apps for it ?
Kind regards,
joan
To get contacts, sync your contacts to GMAIL then sync your gmail account.
Search the appstore for textfree with voice. Or just use Google Voice.
Chandelure said:
To get contacts, sync your contacts to GMAIL then sync your gmail account.
Search the appstore for textfree with voice. Or just use Google Voice.
Click to expand...
Click to collapse
I got all the contacts in my email but not the contact from my mobile phone,, but just the hotmail contacts wanna have the contact from my mobile phone in my tab,, if i know how to text without using apps like whatapp
jojodegraaf said:
I got all the contacts in my email but not the contact from my mobile phone,, but just the hotmail contacts wanna have the contact from my mobile phone in my tab,, if i know how to text without using apps like whatapp
Click to expand...
Click to collapse
But the phone contacts in GMAIL. And I think that if you email someone's phone at their service provider, it will be sent to them as an SMS.
Code:
[email protected]
For an example. I'm 90% sure that's correct (can't remember where I read it), so try it out on your phone first. Tell me if it works!
Chandelure said:
But the phone contacts in GMAIL. And I think that if you email someone's phone at their service provider, it will be sent to them as an SMS.
Code:
[email protected]
For an example. I'm 90% sure that's correct (can't remember where I read it), so try it out on your phone first. Tell me if it works!
Click to expand...
Click to collapse
dont think this will work, there was someone on a dutch forum asked the same, but samung made a mistake on there website about the discription. in the discriptions they were saying you can call and text someone trough your provider, so one off them contacted with samsung and they said it was a mistake on ther website
Oh, IDK then
so,ok i'm confused.
is there a way to make phone calls with the 10.1v? I mean with the sim card and a dialer and all.
otherwise i don't get it why they have a handsfree with the device...
I'm kinda interested in this too.. the tab 10.1v didn't come with a dialer app, when other apps tied to make a phone call I just get a prompt asking if I wanna save the number in my contacts and that's it.
ironically according to Vodafone AU, they encourage you to use Skype or VOIP to make phone calls...even the plan for the Tab is data only (although if you put the SIM in another phone you'll be able to make GSM calls at exorbitant rates).
P.S. the handsfree is for VOIP/Skype dialing - or so as it was intended by design.
The android 3.0 is only for tablet, no phones at all, so this OS is not designed for mobile phones, so all android 3.0 tablet cannot make a phone call, as well as moto Xoom.
However, some guys may crack this operating system and add some codes( something like that ) and make the tablet can be calling. As far as I know, moto Xoom can make a phone call but it is unstable. Perhaps we need more people to get this tablet to develop this phone call function
laoya said:
The android 3.0 is only for tablet, no phones at all, so this OS is not designed for mobile phones, so all android 3.0 tablet cannot make a phone call, as well as moto Xoom.
However, some guys may crack this operating system and add some codes( something like that ) and make the tablet can be calling. As far as I know, moto Xoom can make a phone call but it is unstable. Perhaps we need more people to get this tablet to develop this phone call function
Click to expand...
Click to collapse
I'm not so sure that's true... I'm pretty certain that Honeycomb is quite capable of making and receiving phone calls, but I doubt that carriers want that functionality for all the same reasons that US carriers gimped the US versions of the 7" Tab. Selling a single device that "does it all" is bad for business.
If you look in this video, you can see at various points where you're given an option to make a voice call, and in the settings screen, you have a "Call settings" option in there, but whether or not we will actually be able to do that when the device is released, is another question altogether...
Samsung Galaxy Tab 8.9 live first look
I'm also interested in this (wither the 10.1 Tab is able to do voice calls).
For the guy who said "Honeycomb cant make phone calls"
http://www.gsmarena.com/samsung_gal...eview_amazingly_packs_telephony-news-2709.php
Appearntly the Samsung Tab 8.9 is able to do voice calls, you can do it using your contacts, .. or by using a 3rd party dialer from market.
The Samsung Galaxy Tab 8.9 has just arrived in our office and, boy, do we have some news for you. It turns out that the Honeycomb slate takes on from where its 7” predecessor left off, and brings native telephony capabilities to an even larger form factor.
Yeap, we are talking regular GSM network phone calls and even some video-calls if you wish. There’s no dialer on board, but you can either get a 3rd party app from the market (as we did), or use your contacts list for initiating calls.
Click to expand...
Click to collapse
I hope 10.1 is the same!
i have the IO 10.2 - yes you can make phone calls using Skype or Tango
irkan said:
I'm also interested in this (wither the 10.1 Tab is able to do voice calls).
For the guy who said "Honeycomb cant make phone calls"
http://www.gsmarena.com/samsung_gal...eview_amazingly_packs_telephony-news-2709.php
Appearntly the Samsung Tab 8.9 is able to do voice calls, you can do it using your contacts, .. or by using a 3rd party dialer from market.
I hope 10.1 is the same!
Click to expand...
Click to collapse
the xoom is able to with nettalk wonder if it will work with this?
animatechnica said:
i have the IO 10.2 - yes you can make phone calls using Skype or Tango
Click to expand...
Click to collapse
I don't think we're talking about making phone calls with a 3rd party VoIP services like Skype or Tango. We're talking about making native GSM carrier switched phone calls in exactly the same manner as you can with the 7" Tab (and regular ol' mobile phones of course).
GSM? Please say yes.
Been using my 7 inch with ATT and rotohammer's rom on it to make calls since the device was released. I would love to get the 10.1 but can't see going back to using two devices, voip is not an option.
My two questions:
1. Will ATT be carrying this device
2. Can it be modified to use GSM phone service, (not skype)
clankman said:
Been using my 7 inch with ATT and rotohammer's rom on it to make calls since the device was released. I would love to get the 10.1 but can't see going back to using two devices, voip is not an option.
My two questions:
1. Will ATT be carrying this device
2. Can it be modified to use GSM phone service, (not skype)
Click to expand...
Click to collapse
Perhaps you should give this one a read:
http://forum.xda-developers.com/showthread.php?t=1015404
AT&T data plan issue
Jade Eyed Wolf said:
Perhaps you should give this one a read:
http://forum.xda-developers.com/showthread.php?t=1015404
Click to expand...
Click to collapse
this is an old issue that we have found out how to work around. Get the tethering plan and they don't mind you using you tab as a 'do everything' device. It was the iphone unlimited data plan that made the execs at att get their big girl panties in a wad. You have to be willing to pay for it, which I am, but it works great. Now, back to my questions, aside from att issues, does the 10.1 device have the ability to be used as a gsm phone?
clankman said:
this is an old issue that we have found out how to work around. Get the tethering plan and they don't mind you using you tab as a 'do everything' device. It was the iphone unlimited data plan that made the execs at att get their big girl panties in a wad. You have to be willing to pay for it, which I am, but it works great. Now, back to my questions, aside from att issues, does the 10.1 device have the ability to be used as a gsm phone?
Click to expand...
Click to collapse
Well, I guess that's my issue then; I'm not willing to let go of my unlimited data plan (either of them) so, I'm just using it as a data only device for now with my Laptop Connect SIM instead.
Back on topic though, as for being able to use the 10.1(v) inch tab as a GSM phone, from a purely hardware standpoint, there's no technical reason why it can't. Even GSM/UMTS devices which are branded as "data-only" devices, such as aircard modems, are capable of making and receiving ordinary GSM phone calls, provided you have the right software to utilize those functions. (I should know, I used to make regular phone calls from my Sierra Wireless 870 all the time). Now, whether or not carriers will allow the manufacturer to ship their devices with those calling abilities out-of-box, is an entirely different matter...
So, to summarize:
Is the Galaxy Tab 10.1, 10.1v, 8.9, etc. capable of making and receiving GSM phone calls the same way a GSM phone can? Yes, probably.
Will carriers support this innate hardware capability and allow users to make and receive regular GSM phone calls to and from their tablet devices? Probably not.
That's why I brought up my older post. Not because it isn't still an issue for that specific device, but rather because it's still an issue on the principle that US carriers (not just AT$T), apparently will deliberately cripple new technology in order to force us, the consumers, into buying more of their crap when we don't necessarily need to. E.g. forcing us to buy two line subscriptions, one for data, and one for both voice and data, when one line subscription would have been perfectly ample to suiting our needs, had we been allowed (officially) to use tablet devices as GSM phones as well, and switch freely between the two.
Jus got a 10.1v. For sure phone calls are not supported. But for sure the hardware supports it. Its just "CLOSED" for this tablet via software.
I am sure some cool developer can sort that out pretty soon for us though.
Really would want this to happen.
yahya.hamid said:
Jus got a 10.1v. For sure phone calls are not supported. But for sure the hardware supports it. Its just "CLOSED" for this tablet via software.
I am sure some cool developer can sort that out pretty soon for us though.
Really would want this to happen.
Click to expand...
Click to collapse
Just like I predicted... Great...

Is there a fix for the mic? (Sounds Muffled)

Is there a fix and/or setting out for the muffled audio sound from the microphone? I thought my phone was defective, but my wife's phone sounds just as poor.
I thought that I could live with the poor microphone, but I can't. I'm getting tired of repeating myself. I miss my EVO.
Thanks,
John
Sent from my PG86100 using Tapatalk
Bump
Sent from my PG86100 using Tapatalk
I honestly haven't heard of anyone having this issue. I know a few people with this phone, me being one of them, and haven't heard or have any issues like that. I know its slim chance but maybe they are both defective....take it to a sprint store...can't hurt.
from the silencer of my shooter
Yeah, it's most likely something else, maybe reception. Try taking a video, or use the voice recorder. I've noticed video sound has been really good compared to the og evo.
Im taking in my phone today to see what is the issue. My wife and I both have the HTC EVO 3D, and the call quality really sucks. She has a hard time understanding me and vise vesa. Ive had the HTC Touch Pro, TP2, HTC Hero, and their call quality was amazing compared this his unit.
There have been some people posting that changing the voice codec (vocoder) on the phone helps, but I haven't done a lot of testing with it to say for sure.
I don't know off hand the original post with these directions so someone feel free to link but...
1) get your MSL - call sprint and ask nicely or search for other ways if you're rooted or feel confident to use a software to access your phone from your computer which could screw things up if you change something
2) dial ##DATA# (##3282# - same thing)
3) Choose EDIT MODE
4) Enter your MSL for the password
5) Choose Advanced
6) Change EVRC-B to enable
7) Change Home Orig to EVRC-B
8) Change Roam Orig to EVRC-B
From what I've read, EVRC-B may not work on roaming or airaves, so you may want to keep that on EVRC or just switch back if you have issues. I'm currently testing SVM which I read is newer than both EVRC and EVRC-B but I could be wrong and people have said they hear me clearer. Not sure if this one works everywhere though and I could be wrong in it being newer.
I DID read that 13K gives great quality, but is older, uses more bandwidth from the tower (bad for Sprint), and has more tendency to drop calls in weaker signal spots. Also read that glitches (pops, digital noise, etc) is more obvious using that one too.
See if that helps.
Thanks! I'm an going to try this out. I will let you know.
Sent from my PG86100 using Tapatalk
Has anyone been able to dial Sprint Support (*2 or 1-888-211-4727) while on EVRC-B?
When I switched to EVRC-B, I noticed that I couldn't call Sprint Support, whether I dialed *2 or 1-888-211-4727, either way it would always give me a message saying "Network is Busy, Please try again at a later time".
I ended up having to call Sprint from my home phone and I wasn't able to actually make a call to Sprint Support from my EVO 3D until I went back into the EPST Settings, disabled EVRC-B and switched Home and Roam Orig. back to EVRC.
Has anyone else had this problem?
djslawslaw said:
When I switched to EVRC-B, I noticed that I couldn't call Sprint Support, whether I dialed *2 or 1-888-211-4727, either way it would always give me a message saying "Network is Busy, Please try again at a later time".
I ended up having to call Sprint from my home phone and I wasn't able to actually make a call to Sprint Support from my EVO 3D until I went back into the EPST Settings, disabled EVRC-B and switched Home and Roam Orig. back to EVRC.
Has anyone else had this problem?
Click to expand...
Click to collapse
Same here.
AND HERE!!
That's why I asked this question [Q] In-Call Voice Quality Better on Rooted EVO3D With Flashed ROMs?
I have had similar problems, nailed it down to this:
- handset and speakerphone work fine (for me), good audio quality in and out
- WIRED headset is the problem - mic gain is way too high, so sound is very muffled, but incoming sound is fine
- If I enable TTY mode, mic gain is reduced to the point where it is fine, people can hear me clearly, but incoming sound is very low (no good with any background noise at all...)
I restored factory settings (erased all my data), and initially the problem was fixed, but after setting up email, etc., problem has returned.
I am trialing Volume+, early on it seems okay, but the real answer is to fix the mic gain.
Is there a way to adjust the mic gain? I am on the Rogers network in Canada, some of the suggestions from the Sprint posts do not work for me...
I have reported the issue to HTC tech support but they had no solution (yet?)
Anybody have any suggestions?
I never had any luck finding a solution.
Sent from my PG86100 using Tapatalk
I have the same problem with my mic.
I haven't found a solution yet but somewhere on the web I found a thread about a Google nexus phone with a similar problem with the mic.
The guy there said that when he cleared the dalvic cache the problem disappeared.
I tried the same thing and for the first couple of calls it seemed to work.
But then all of a sudden the problem appeared again.

[Q] wifi calling unlocked note on tmobile?

ok so i bought this phone and it's delightful. I dont get the speeds i would normally get on a native tmobile 4g phone, but most of the time i'm either working or at home so wifi is always available
however, i've recently moved into a new apartment with my fiance and i only get about 1 bar of reception in my bedroom, and pretty much no bars in my living room and bathroom. Unfortunately, it dosen't appear as though this phone has any native wifi calling, and was wondering if anybody had some sort of resolution for this?
Yes i thought of some of the other apps out there but what i dont like is the fact that i either have to subscribe a new number, or there are advertisements before ringing, or how i have to disable an app when i go out because my data connection isn't as fast as a native tmobile 4g, so im kind of in a bind... i really love the phone and would prefer to keep using it, i just wish that i had something that would be able to run as smoothly as any of my previous tmobile android phones...
anyways i know it's probably asking for alot, but if someone has a solution, please let me know, i tried searching but i didn't come up with much
This would be awesome.
tekhnologia said:
ok so i bought this phone and it's delightful. I dont get the speeds i would normally get on a native tmobile 4g phone, but most of the time i'm either working or at home so wifi is always available
a
however, i've recently moved into a new apartment with my fiance and i only get about 1 bar of reception in my bedroom, and pretty much no bars in my living room and bathroom. Unfortunately, it dosen't appear as though this phone has any native wifi calling, and was wondering if anybody had some sort of resolution for this?
Yes i thought of some of the other apps out there but what i dont like is the fact that i either have to subscribe a new number, or there are advertisements before ringing, or how i have to disable an app when i go out because my data connection isn't as fast as a native tmobile 4g, so im kind of in a bind... i really love the phone and would prefer to keep using it, i just wish that i had something that would be able to run as smoothly as any of my previous tmobile android phones...
anyways i know it's probably asking for alot, but if someone has a solution, please let me know, i tried searching but i didn't come up with much
Click to expand...
Click to collapse
I would like to recommend this:
https://play.google.com/store/apps/...ch_result#?t=W251bGwsMSwyLDEsImNvbS5ndm9pcCJd
It will do everything you are wanting, plus you can make calls and save your minuets even if you have service, if your in an area where your data is fast enough. It integrates with the phone well and even uses the built in dialer.
I bought this app back when i got my first tablet that didn't even have cell capabilities and I've used it on various devices since. i think you will find the call quality is excellent.
tekhnologia said:
ok so i bought this phone and it's delightful. I dont get the speeds i would normally get on a native tmobile 4g phone, but most of the time i'm either working or at home so wifi is always available
however, i've recently moved into a new apartment with my fiance and i only get about 1 bar of reception in my bedroom, and pretty much no bars in my living room and bathroom. Unfortunately, it dosen't appear as though this phone has any native wifi calling, and was wondering if anybody had some sort of resolution for this?
Yes i thought of some of the other apps out there but what i dont like is the fact that i either have to subscribe a new number, or there are advertisements before ringing, or how i have to disable an app when i go out because my data connection isn't as fast as a native tmobile 4g, so im kind of in a bind... i really love the phone and would prefer to keep using it, i just wish that i had something that would be able to run as smoothly as any of my previous tmobile android phones...
anyways i know it's probably asking for alot, but if someone has a solution, please let me know, i tried searching but i didn't come up with much
Click to expand...
Click to collapse
Ok, this is like 99% of what i want, i just want people to call my NATIVE phone number to call me when im on wifi.
I dont want to hand out an alternative number, that's my biggest issue at the moment
for example:
if my family is in an accident, and they have my native number listed in their emergency contact, and they try calling, then that could be rather bad...
but yea, if you have any other ideas, i'm all open to it
When you set up your Google Voice number, you put your "native" number in google voice, when someone calls it, your google voice number will ring, the person calling is not aware of your real number... i'll give my google voice number out... 731-412-0080. When you call it, it automatically rings my house and my cellphone and which ever one i pick up on, you will have no clue, all that matters is when you call my google voice number you get me, I have several forwarding filters set up...
You would simply set up your native number calls forward to your Google voice automatically.
So If your native number was 555-121-1234 and I called it, I would be silently fowarded to your GV number and your cell would ring... (google voice it's self is completely free) go here to see: https://www.google.com/voice
tekhnologia said:
Ok, this is like 99% of what i want, i just want people to call my NATIVE phone number to call me when im on wifi.
I dont want to hand out an alternative number, that's my biggest issue at the moment
for example:
if my family is in an accident, and they have my native number listed in their emergency contact, and they try calling, then that could be rather bad...
but yea, if you have any other ideas, i'm all open to it
Click to expand...
Click to collapse
i already have google voice but never considered forwarding my tmobile number to it... hmm.. you may have made my day =)
Glad I could help... Google voice + that app oi told you about in my 1st post = awesomeness
tekhnologia said:
i already have google voice but never considered forwarding my tmobile number to it... hmm.. you may have made my day =)
Click to expand...
Click to collapse
I use google voice on that app but the call quality is not decent at all. Ive only used it on wifi and its terrible. Voce gets distored some lag, and even some echoing.
ok so here was my ultimate solution
got the app that was mentioned and also got tasker
i set it so that whenever i would enter my home wireless network exclusively, tasker would make my phone forward calls to my google voice number, which in turn forwarded the calls to my app =)
also set it so that when i leave my network, it would automatically disengage the ipgroove app, so all in all i gotta say it worked out ok, thanks!
I use groove ip
Sent from my BAMF Samsung G/Note
Yup that's what I recommended I have had it for a year now.
Felinos11 said:
I use groove ip
Sent from my BAMF Samsung G/Note
Click to expand...
Click to collapse
if anyone chooses to go this route and there's no wifi calling app in the future, just let me know, it was a wonderful way to get to do what i needed to do, and with the help of tasker, it will auto engage/disengage features, almost as if we did have the native wifi calling feature that the s2 has, but yea, i'd be glad to help anytime =)
Taking up on technologia's offer to help
@tekhnologia: When you are at home connected via wifi, are you forwarding your t-mobile number to your google voice number (perhaps using "conditional call forwarding")?
Otherwise, I think I more or less understand your setup, but a brief list of steps would be awesome!
Thanks for the offer to help.
tekhnologia said:
if anyone chooses to go this route and there's no wifi calling app in the future, just let me know, it was a wonderful way to get to do what i needed to do, and with the help of tasker, it will auto engage/disengage features, almost as if we did have the native wifi calling feature that the s2 has, but yea, i'd be glad to help anytime =)
Click to expand...
Click to collapse

Use Tablet as Phone with an app like skyroam

I just stumbled upon this really useful device which many of us might already know about...Gmate...
which uses a network ic to connect to cellular service and provides you added functionality of a phone to your tablet via bluetooth and a special app from playstore...
http://www.skyroam.com/index.php?option=com_content&view=article&id=44&Itemid=67&lang=en
The skyroam app...it acts as an interface between the two devices and lets you optimize the phone function on the tablet...
https://play.google.com/store/apps/details?id=com.simo.simomate&feature=search_result
But my real concern is that our android phones already have a network ic working in them with a bluetooth chip...
So is there an app like skyroam already made which can enable us to make calls and use the network functions on our TFP via the android phone...i tried searching for it but all in vain...
If not already developed...This is an interesting concept and will be quite useful to use tablet for phone functions especially handsfree voice calls, video calls and using the 3G internet from the phone (though we can use network by creating a hotspot)...
My point is why buy the same thing twice in form of gmate when we have all the ingredients already working right with us...we just need an app...
Can anyone help me with this...?
The closest I've seen is TabletTalk. The developer seems to be aiming for the type of functionality you describe, and much of it is in there already. I find it very useful.
Tablet talk has been good for me. You can answer and make calls right from your tablet. You do need to be paired with your phone through blue tooth or wifi.
Sent from my Transformer Prime TF201 using Tapatalk 2
Who is this guy, Dr. Seuss? Sorry.....I couldn't resist.
Thanks for this thread OP, I have been looking for this functionality for awhile now, but wasn't sure which way to go with it.
Am I correct to understand that something like tablet talk using your cell for calls?
dvickers79 said:
Thanks for this thread OP, I have been looking for this functionality for awhile now, but wasn't sure which way to go with it.
Am I correct to understand that something like tablet talk using your cell for calls?
Click to expand...
Click to collapse
With tablet talk you can answer and place calls through your tablet and caller ID shows up on your tab, you can also send and receive text messages.
The call audio does NOT get routed through the tablet though. I believe you need to have a BT headset if you want to route the call audio. So when you get or place a call from the tab it actually activates the call on your phone. If you have a BT headset audio gets routed (I believe, I dont use BT headsets so dont hold me to that) otherwise you either have to pick up your phone and talk like you normally would, or you can activate your phone's speakerphone from the app on the tab
You may want to take a look at grooveIP, which uses your google voice number to call and receive calls without a cell network. Works great on tabs and phones and you can even receive calls. Works great for me so far!
Sent from my Inspire 4G using xda premium

[Verizon LG V10] Advanced Calling feature: are you using it?

If you're using Advanced Calling feature, please share your experience. Like, dislike, what affect it has on other things (if any), etc.
Thank you.
If you are talking about the phone call over WiFi, I had it on for a few calls and thought the quality was not very good so I turned it off.
No, Advanced Calling (AC) is voice over LTE tech. The LG V10 can't do simultaneous voice and data (i.e. using a web search while on a call) unless AC is turned on.
Here's info from Verizon:
Advanced Calling 1.0 for Android Devices FAQs
What is Advanced Calling?
For Apple devices, check out our Advanced Calling 1.0 for Apple devices FAQs.
Advanced Calling 1.0 is a first generation suite of services enabled by VoLTE (Voice over LTE) technology. VoLTE is a new technology platform that delivers voice calls over the 4G LTE network instead of the traditional voice network.
The benefits of Advanced Calling 1.0 include:
HD Voice
1-way or 2-way video calls* (including support for video calls over Wi-Fi)
6-way conference calls
Simultaneous voice and 4G LTE data**
*Note: Not all Advanced Calling 1.0-capable devices support Video Calling.
**Note: Most 4G LTE Android smartphones today already support simultaneous voice and LTE data without Advanced Calling 1.0. However, some newer Advanced Calling 1.0-capable devices such as the Droid Turbo by Motorola do not support simultaneous voice and LTE data unless Advanced Calling 1.0 is activated.
What is HD Voice?
HD Voice delivers clearer, natural-sounding audio when both parties are using HD Voice-enabled phones that are connected to our 4G LTE network.
HD Voice is included in your existing voice plan at no additional charge, but must be added to your account in My Verizon. HD Voice calls are billed as standard voice minutes, according to your plan.
What is Video Calling?
Video Calling is a feature that lets you make an HD Voice call combined with real-time video.
Making video calls is as simple and easy as making traditional voice calls. If the person you're calling can accept a video call, you'll see a Camera icon. You can then select that icon to upgrade to a video call. There's no need to download an app or set up a new user ID to place a video call.
Notes:
Video Calling requires a Video Calling-enabled phone.
When connected to Verizon's 4G LTE network and known Wi-Fi access points, video calls will automatically hand off to Wi-Fi.
What is simultaneous voice and LTE data?
Simultaneous voice and 4G LTE data allows customers connected to Verizon's 4G LTE network to surf the web, continue a download, use an application, or use a feature like Mobile Hotspot while talking on a call.
Who's eligible for Advanced Calling 1.0?
To be eligible for Advanced Calling 1.0, you need to meet all of the following requirements:
Be on a standard monthly plan*
Have an HD Voice-capable phone
Note: If you have any features that are incompatible with Advanced Calling 1.0, you'll need to remove them when you add the HD Voice feature to your account.
* Prepaid accounts aren't eligible for Advanced Calling 1.0 at this time.
Which devices support Advanced Calling 1.0?
You can view our current list of phones compatible with Advanced Calling 1.0 online. This list will grow over time.
How much does Advanced Calling 1.0 cost?
Advanced Calling 1.0 is available at no additional charge, and HD Voice is included in existing plans.
HD Voice calls are billed as standard voice calls according to your plan. No data charges apply.
Mobile-to-Mobile calls that happen to be HD Voice calls are charged just like traditional Mobile-to-Mobile calls and are billed against your monthly minute allowance according to your plan.
A video call is an HD Voice call combined with real-time video. The voice portion is billed as a standard voice call, according to your plan. The video portion is billed as data, according to your data plan. No data charges apply to video calls transmitted over Wi-Fi.
Note: An average 1-minute video call uses about 6 - 8 MB of data. The actual data consumption of your video call may vary. You can estimate your data usage using our online Data Usage Calculator.
I use it all the time. I would not get a phone that I could not talk on and use the internet simultaneously. I don't have any issues with voice quality.
AndroidCraig said:
I use it all the time. I would not get a phone that I could not talk on and use the internet simultaneously. I don't have any issues with voice quality.
Click to expand...
Click to collapse
Great, thank you!
Truename said:
If you're using Advanced Calling feature, please share your experience. Like, dislike, what affect it has on other things (if any), etc.
Thank you.
Click to expand...
Click to collapse
For me, I felt the call audio was a little soft/tinny (not sure how to describe it) and thought it odd that the call audio on a phone like this wasn't better so I thought I'd give it a try and activated it late last week. At first, I wasn't sure I could tell a difference but then noticed that the clarity of the audio on phone calls seems to be improved - i.e. instead of the call sounding distant/tinny, it seemed to "feel" closer, with better audio clarity.
Maybe it's a placebo affect but I can say I'm happier with the call quality after activating it. Plus, what can it hurt...it's a feature Verizon is offering for free!
When I use advance calling for some reason on BT the names aren't displayed on my vehicle screen, only the phone number shows up. If I turn it off it will display the name of the call coming in or going out. Anyone else have this happen?
My family won't talk to me with it on. They sound great to me but I sound like I am in a tunnel.
But with it off no data while in a call.
This is might be a deal killer with this phone...
I rarely had dropped calls until using AC. Coupled with weird sound quality, I call it At&t Calling. ?
Couple observations
-I maybe incorrect on this, but I believe that in order for voLTE to actually work, BOTH parties in a call need to have it - service availability and a compatible phone. So I'm not sure whether most people weighing in actually know for certain if they've actually had a VOLTE call or not.
- In a post elsewhere another user blamed voLTE for increasing battery drain rate. Certainly seems plausible, but if true, that would be truly unfortunate because apparently disabling it prevents simultaneous data and voice - an issue I've never had to deal with before.
- this might not be relevant to many, but I was pulling my hair out trying to determine why my location-based profile app (Llama) as well as similar apps that use cell tower polling to determine location at low battery cost, were not able to read any cell tower IDs - until I disabled Advanced Calling and then low and behold they worked again.
I'm dubious of AC at this point, and curious to hear more people's experience.
Sent from my GT-N5110 using Tapatalk
I came from the G3 which allowed simultaneous voice and data but never really used it. What I think is that we should AT MINIMUM be able to use Maps and be on a call without losing out directions as now Maps directions stop if you get a call. I really don't think GPS directions should be using data anyway. I will not be enabling AC until it works with Ring Back Tones or it is something that I can't avoid.
Sent from my VS990 using Tapatalk
I use it, but so far the only person I've been able to talk to using HD voice is my girlfriend and that's only because I activated it on her phone. It sounds a lot different, but it's hard to explain what it's like. It's almost like you're talking to someone right next to you, but your in a glass box. There's this weird difference that I can't put my finger on what it is exactly but it seems the sound of emptiness is clearer in the background.
Quick update, it's awful if you don't have a decent data connection. We were talking while she was in the gym and it sounded so bad. She would cut out randomly, or sound way softer than normal and I couldn't understand anything. It's OK at best, but I think I prefer traditional calling.
I am suspicious of it causing my voice to echo. It doesn't always happen but since I've left it on for a while, I've heard my own voice very frequently. The other party, who probably isn't using AC has never commented on an echo and I assume they're not hearing it.
I have it activated on my phone as well as my wife's; i've only talked to her using AC. It sounds very much like talking to someone over Skype, Hangouts, etc. Sometimes it seems very clear and easier to hear the other person, then other times it will "pixelate" the sound, which is also something that most people that have used Skype, etc have experiences. I've never had any voice echoing though. I would never pay for this feature, but it is the only way we can use data and voice simultaneously.
It was also needlessly difficult to enable this feature on my wifes G4. I was able to activate it on my V10 no prob, but could not do it on the G4. Finally called VZW and after 10 minutes with an L2 support guy it was enabled. Something was messed up on their end.
I'm unable to activate it on my phone. My 'Advanced Calling' screen just says "upgrade service to..." but I activated it online in my Verizon account 8 hours and about 3 reboots ago. Any ideas?
I can't believe a device in 2015 is incapable of simultaneous voice and data. Verizon forcing this single antenna path on us is pretty ridiculous. I use tethering a lot and I also look things up for my parents while talking to them. Are these use cases really that rare that no one complains?
ornwilson said:
I'm unable to activate it on my phone. My 'Advanced Calling' screen just says "upgrade service to..." but I activated it online in my Verizon account 8 hours and about 3 reboots ago. Any ideas?
I can't believe a device in 2015 is incapable of simultaneous voice and data. Verizon forcing this single antenna path on us is pretty ridiculous. I use tethering a lot and I also look things up for my parents while talking to them. Are these use cases really that rare that no one complains?
Click to expand...
Click to collapse
Ok this happened to me and what the problem was my advanced calling got corrupt and Verizon on there end had to remove my advanced calling and add it back to my account and then I restarted and all my options displayed right
Sent from my VS990 using Tapatalk
ornwilson said:
I'm unable to activate it on my phone. My 'Advanced Calling' screen just says "upgrade service to..." but I activated it online in my Verizon account 8 hours and about 3 reboots ago. Any ideas?
I can't believe a device in 2015 is incapable of simultaneous voice and data. Verizon forcing this single antenna path on us is pretty ridiculous. I use tethering a lot and I also look things up for my parents while talking to them. Are these use cases really that rare that no one complains?
Click to expand...
Click to collapse
Honestly, no they are not that rare. I've used data while talking on my note 3 and LG G3. This makes me want to sell the lg v10. That's excluding the fact I can't get txts after root working and no I don't want to use HD calling and it's not on my plan.
Ok guys I got a question!! I rooted my v10 on 5.1.1 and had my A/C calling on when I flashed the upgrade root package. phone started to get a bit buggie after awhile so I did a factory reset lost my A/C so I unrooted and try to reactivate it was a no go. I disabled it from my line then tried again and again and again. Did this for about 3 hours finally call Verizon they tried to help but there useless considering there reading from a script. So now I'm back to root with no A/C. I really like my A/C and they want me to update to 6.0 and I'm not giving up root no way in hell am I doing that does anyone know of a work around. I got a new SIM card coming in from Verizon hoping that may fix it. Any and all help is very much appreciated!!
Sent from my XPOSED V10

Categories

Resources