I know this is not allowed by att, but is this something that can be hacked, or is it a hardware issue? Or at least tethering?
Guess it should be solved as a voice call functionality block. S-OFF + simple property modification. Without custom ROM.
I'm sure a hack will be found for it, once the device is rooted and such. Much like the Sprint device ROMs come with the Wireless Tether application, there will likely be one for the Jetstream once we can get the device rooted.
Greetings... Believe it or not, I "accidently" found a way to activate it, without root. I installed super box from the market, and when I was in the power save menu, the hotspot line said off, but clicking it took me to the regular settings menu and the menu to the right allowed me to turn it on, give it a name and set security! The odd thing is that the list of menus on the left is not highlighted as to which one you are in, so you can't access it through "settings," only superbox. There may be another way, but this works!
HI,
I am new to Android with my first device being the Jetstream. I would love to have hotspot capabilities, would it be possible for you o provide a stepwise outline of how you gt this feature to work?
Thanks so much.
Ok, I downloaded the program and as you said, I was able to turn on the wi-fi hotspot capability; however, even when I changed the SSID name it showed up in other devices as "HTC Portable Hotspot" and even if the security was left open it kept asking for a password. I changed the security to require a password, but when I entered it it did not allow me to connect.
Did you do anything else?
I think you are on track.... The password is your choice, and is only an option if you pick one of the two security protocols. The password would be entered on the other device trying to connect to the jetstream. If the name is fixed, I'm at a loss, didn't have that issue...
any luck with this?
Related
Hello All,
Latest Stock OEM ROM from U S Cellular/HTC site,
FYI: I do not have a data plan on this phone.
Been trying to get seamless sip/voip working on my new to me US Cellular HTC Touch Pro CDMA. I can get this phone to work via asterisk box by installing Raphael_voip, and Setup_voip cabs. The audio does come though the earpiece as expected but when checking voiecmails for example the connection drops at the same point each time,with never getting to listen to voicemails. I can however connect to an ip 'hardphone' and audio is perfect both ways. Something is not quite right with nat/sip traversal I am sure. I tried fring and aegphone as well and it appears they use the same sip stack,that is native to WM6.1.
I'm sure this has been hashed a zillion times but does anyone have an 'out of the box' working ROM with good sip/voip integrated.?
I can never get the 'Internet Calling" tab to show up in the phone sub catagory on this phone. I have went into the Today options,disabled TouchFlow and enabled Internet Calling,and the check mark sticks, but simply never get the Internet Calling" tab as an option?
I see in the Windows directory there is an Voip_call_16.dll file. I have never seen a reference to this anywhere,in the WinMo6.1 forums? Also nativly this phone does not ROM in with the required 4 voip files;
dnsapi.dll
rtcdll.dll
ipdialplan.xml
voipphonecanvas.dll
Wonder if anyone knows what the registry key is that sets this? I m geussing without this showing up natively,it simply will not work as expected.
Adding. When this phone registers to my Asterisk server it is in fact showing as a peer,but shows unreachable. Strange is that I can get audio both ways between this phone and a soft or hard phone,,,but I am sure something is not negotiating as it should. Example.Retreiving voicemails always fails at the exact same point. I'm not sure if it is in fact the sip stack,or something dodgey in the actual network stack of WinMo6.1?
Ideas?
Thanks,
Barry
I've felt that pain
http://forum.xda-developers.com/showthread.php?t=618486
The registry key that enables Internet Calling is listed there. There also is an issue with the way MS authentication, so that may be your voicemail issue. If you check your logs on your Asterisk server are you getting auth failed errors?
I didn't get much response on my previous question about proxy support for the stock rom, so I was wondering if any of the alternate roms include it. I would very much like to have access to the internet at work, but the school district requires loggon through a proxy server (content filter) before you can access the WiFi network. I realize that port restrictions that the district places on the network will likely prevent me from accessing the market, gmail, or voice search. But at school, I would most like to just access flash based educational website for kids.
Any thoughts on this? The district is moving toward ipads as the tablet platform of choice because of the lack of proxy support with Android. But the ipads lack of support for flash really hinders what I want a tablet to be able to do for me. (Yes, I want my cake and eat it too!) Is this too much to ask?
I connect my gtab to my schools wirelesss that is using 802.1x EAP for wireless security. I had to install a mod that changed the settings app and allowed advanced wireless settings. That allowed me to put in the authentication type, domain name, password, etc. Once connected, I ran a mod that set it back to the original settings apps. I asked in your previous post as to whether you are having problems actually getting on the wireless or once on, you can't bet by the web filter. We use websense here. Once I got on the wireless, there was an websense authentication dialog that popped up. Once I put my domain\username and password in, it works fine.
It won't even let me connect to the district network because I don't have anywhere to enter the proxy settings in the wifi set up box.
Assuming you have Pershoot's or Clemsyn's Kernel (or one of the better ROMs), you need something like ASProxy. I use it at work all the time and it does the job. There is a free program called TransParentProxy which is more limited but does allow you to quickly test settings without spending any money.
I do not see a proxy settings in the wpa_supplicant.conf file. My understanding of this file is it lists all possible settings settings available for Wi-Fi configurations.
# This file describes configuration file format and lists all available option.
Click to expand...
Click to collapse
Previously I've only needed to access a proxy after connecting to the network. Perhaps you have run into a problem getting connected to your network using the tablets Wi-Fi settings manager. So connecting to the network might be your first step and then connecting to the proxy your 2nd.
I found the free Wifi Advanced Config Editor (WifiACE on the Android Market) to have a GUI to easily configure advanced Wi-Fi settings not found in the tablet's settings. I realized when trying to set up an advanced configuration I needed to create a new connection in the tablets WiFi Settings with the security of NONE to avoid having some of the wrong settings configured by default. Then using the information from the my network admin I manually set the options via the WifACE GUI, un-checking NONE, and bingo I got connected.
I recommend WiFiACe with one caveat: make sure you have a way (like adb) working and know how to backup, delete, and restore files and that you make a back up of all wpa_supplicant.conf files on your tablet.
My caveat comes because my first reboot after I got connected to the Enterprise network at work the Wifi would not start or run. It would only display "error" and do nothing. Several reboots later it still wouldn't start and without Wi-Fi running there is no way to make configuration changes either through WifiACE or the tablets Wi-Fi Settings. I had to use the adb shell to delete the newly configured wap_supplicant.conf and create a new connection via the tablets Wi-Fi Settings and then make the necessary changes through WifiACE. Once that was done it ran and connected. Now after multiple reboots it still works and connects. Without the ability to delete the file I'm afraid I would have had to re-flash my tablet to get Wi-Fi to work again.
I don't think you've ever mentioned what ROM you're running. If you're running stock, you will have a very difficult time, in fact it may be impossible. If you're running a different mod, there's hope. Now, assuming that you got ClockWordMod (CWM) installed, you can probably be successful in at least connecting to the wireless. If you don't have CWM installed, here's a good place to start:
http://forum.xda-developers.com/showthread.php?t=865245
Once you have CWM installed, go to this thread:
http://forum.xda-developers.com/showthread.php?t=857939
This will give you the zips for installing a differernt wireless config tool that will allow you to put in the 802.1x EAP config. Once you can successfully connect, you back out the the tool you installed.
I bought my first smartphone ever last month to give you an idea how new I am. My last phone was a Touch that I had set up to allow tethering... but I had to upgrade my phone. I need my tethering back, and I prefer not going through a program like pda-net.
So, I read that if I root the phone, I'd have tethering back. I used Revolutionary. I backed up my phone. I installed clockwork and superuser. I think I did everything I'm supposed to do. However, when I plug the phone in (I prefer USB tethering) and click the "Internet Connection Mode", I still get the message I need to subscribe for $20 a month, and I don't get a connection. Do I need to do something else to enable wired tethering? Do I have to install a 3rd party program as well? Or is it that I haven't installed a custom ROM/Kernel/Radio/Whatever would be the right thing?
The phone is a Thunderbolt. HTC Sense 2.1, Software #2.11.605.5, Android version 2.3.4.
I really don't have much of an idea what I'm talking about, so if anyone has any fairly easy answers, it would be greatly appreciated. Thanks for any help.
Find my WiFi tether thread and follow instructions
Sent from my ADR6400L using XDA App
Do what lantern says. Just rooting does not unlock the built in internet sharing apps. You need to get the apps that do what you want now. I.e. wireless tether, you might like wired but wireless is very nice.
Sent from the nearest cellular tower.
Grnlantern79,
Well, I've tried following your instructions on the other thread. I downloaded the .apk you had listed.
That took me an hour to figure out how to install... didn't know I needed to install another program to install something from a memory card.
As for these instructions:
"Mine did not work until I changed the device profile to Thunderbolt in settings.
Then I changed a few other settings such as
Force WiFi driver reloading (check) *has worked for some*
Routing fix (check) *most important one*
Disable wake-lock (unchecked) -> *this is why you lose connection after your screen turns off*"
I can't for the life of me find where any of these are. I've spent a good amount of time trying to find them, and just can't seem to find a settings section.
Then I tried Autotethering and WiFi Tether from the Market. It doesn't matter which I use, when I hit "Internet Connection Mode" the Verizon $20 to use message pops up. I tried on two computers, and both will see something there, but not connect to the internet. I tried connecting without selecting that, but it still didn't work (had it on "charge only").
I'm very frustrated... I've spent hours working on this and don't feel like I'm making any progress. I appreciate you attempting to help via that other thread, but I'm lost. If you have any way of giving me a more detailed explanation of how to get this to work, I would greatly appreciate it.
If I just install some new ROM and not work off the rooted stock one I have, would they come with the tethering block from Verizon disabled?
Thanks for any advice.
Telaeus
When you open WiFi tether press menu the soft key at bottom of your phone, the settings will pop up.
Device profile = thunderbolt
Routing fix = check box
Enable access control
Now I can tell you are not tech savy so this is where my help stops. If you can't find the settings in a program after an hour, you should think about return your smart phone for a feature phone.
Sent from my ADR6400L using XDA App
Well, thanks for trying to help then Grnlantern79. I had misunderstood where to look for the settings. Figured it was settings on the phone itself I was changing to bypass the Verizon Internet Connection thing.
I changed all the settings in WiFi tether. Still no luck. The computer recognizes the network... I set it to Public. It's listed as HTC Remote NDIS Based Device. However, there is no Internet or Network access. I'm not putting it to "internet connection mode" since the Verizon popup has never gone away... leaving it on Charge only.
If anyone else is willing to try and assist me, I would appreciate it. I fully admit to not being smartphone savvy. However, I'm not incapable as Lantern implies... I've built my own computers since 1993, and can diagnose and do pretty much anything hardware related. Unfortunately, smartphones are different, and I'm still getting up to speed on all the terminology and uses of them.
So, thanks Lantern... but is anyone else able to figure out why this isn't working?
Thanks for any help.
Enable access control
Check
WiFi driver reload
Routing fix
Uncheck
Disable wake lock
Setup-method
Apple computer
Wext
Any other
softtap
Set computer profile to home network.
When u connect to ur phone it wireless not usb, ur phone will have a notification asking if its ok to connect, hit enable. Done.
Sent from my ADR6400L using XDA App
Hi,
My apologies if this is the incorrect section. I know the Virgin Mobile SGS2 is NOT the I9100 model, however the correct phone was not listed on this site (nearest is the T-Mobile model, but the options differ on their phone).
I'm experiencing an issue with trying to enable the wireless hotspot option for my phone. In every instance I have tried, I have received errors that ad-hoc failed to start and related problems. Let me make it clear that this version of the samsung galaxy DOES NOT have the option to turn on wireless tethering in the native settings menu (it's simply not there). My carrier most likely hid the option because it is an extra $15 a month to use the feature. I can, however, attempt to start the hotspot service with a third party app, but it runs for no more than 3 seconds and I get error 67:" Unable to connect to data network, turning off Hotspot..."
My phone is rooted and I have full access to edit system files (I did so to remove the ear-piercing camera shutter noise). I am using the stock rom and do not intend to flash a different rom to this phone. To lessen redundant suggestions that have been said hundreds of times and have failed to fix my issue, here is everything I have done:
Attempted to use FoxFi. All this app does is start the native hotspot capability on your phone, so I got the same error 67. No network connection. The network only appears for a split second when enabling the native hotspot setting, but since the phone turns it off, I can't connect to it.
Attempted to use Barnacle. I receive the error "Could not set ad-hoc mode of wlan0: Operation not supported on transport endpoint."
Attempted to use Wifi Tether for Rooted Users (for some reason this app is listed as "Not Compatible" for my phone in Google Play). Again, I receive an error that setting ad-hoc failed. All other services start successfully though, but the network does not appear for my PC to connect to.
Checked to make sure my 3G/4G is actually on and functioning.
Despite all this, I CAN utilize the USB tether feature just fine in PdaNet. It's the wireless hotspot that is eluding me. I know that flashing a different rom can get me around this issue, but I really would prefer to resolve this problem without doing that if it's possible. One thread I read said something about editing a .db file, but it was for an HTC phone and I'm a little wary to try it on my phone. I'm sorry for coming off rather cross, but I'm just a bit frustrated as every solution I find never works. It seems like this would be a simple thing to do. Is there a system file I can edit that will allow my phone to enable its native hotspot capabilities? Or something that will resolve the ad-hoc issue? Or am I blindly over-looking something obvious? If nothing will work except for flashing, then hey, at least I tried. It's not going to kill me if I can't get the wireless tethering to work, but it was one of the reasons I wanted to root my phone.
Any help would be greatly appreciated. Thanks in advance!
I randomly figured out the problem myself. Downloaded something on a whim and it actually worked. Let me go through each step so anyone else who has this same problem can try this out.
The majority of what I did can be followed here:
*Can't post the link. Thank you, forum restrictions... It's from a website called "highonandroid.com" so google that with the appropriate keywords (wifi tether, android, etc.).
But in case the link goes dead or something like that, here is a step-by-step reiteration:
1. Download Trev-E's mod for the Wifi Tether for Root Users app. I have the exact version I used attached to this post.
2. Install it, and immediately go to settings and make the following adjustments:
- Change device profile to "Generic ICS/JB (wlan0)."
- Change setup-method to "Netd-Ndc (master)."
- Tick the option "Send Netd Max Client Cmd."
- Tick "Wifi driver reload." The second one did not work for me, but try it if the first reload does nothing.
- Although the original tutorial says to tick "MSS clamping," this option is not available on my phone. But this did not stop the app from working.
3. Exit settings and hit the wifi icon. Fingers crossed it works for you!
After doing that, the app showed no errors in the log, the network name appeared on my computer, and I was able to connect effortlessly. Most importantly, the internet worked!
Also, enabling/disabling the tether DID NOT break my phone's wifi or 3G service. Everything ran fine when I stopped using the app and I didn't need to restart my phone. Putting this out there because I know some phones will trip out when enabling this feature. Good luck! And big thanks to xda's Trev-E for the app.
Thank you! That was driving me nuts trying to tether my GS2 to my tablet. I dont have the clamping option either but its working perfectly when nothing else has.
Nice instructions. I rooted my phone today (root virgin), downloaded the trev-e you have linked and got it to work. (Virgin Mobile Samsung Galaxy SII 4G)
I then tried to use encryption and the phone was just not having it, the internet connection wouldn't work anymore (laptop was connected but said there was no internet access). Frooze up the phone, had to reboot, frooze again, reboot, turn the feature off, freeze, reboot, pull battery etc etc. Finally have it working again with encryption off.
Pretty happy to have tethering working, but wish I could encrypt it haha.
Do I have the wrong TrevE using the stock ROM? (using the TrevE linked in this thread).
Now to learn what else to do in the wonderful world of being rooted...
*** EDIT- Looks like installing busybox fixed the issue!!
Thanks!
Awesome work, follow the instructions if you have virgin mobile it will work perfectly
Wifi Calling/Texts info for other countries​
This is just some info I found out while traveling around Mexico. I would imagine it would work in other countries as well.
Sprint is still working on this, but they really want it to work so they don't have to unlock your phone Sim Card. They will still unlock your Sim if you meet the criteria. Google that info, it's in these forums. Mine is unlocked BTW.
So this is what it took to get Wifi Calling/texts to work:
1. Turn off Data
2. Turn off Location
3. Turn on Wifi - you'll need a pretty strong signal for this to work. Or else it will keep tripping out.
4. Turn on Wifi Calling - You should probably do this before traveling to another country to get it all set up. It uses data and requires a reboot to work - if I remember right.
4a. You'll need to enter an actual address. This is required for 9-1-1 which is a requirement for Wifi Calling. It's all part of the agreement you'll need to acknowledge when setting it up.
5. While out of country, and with Wifi Calling turned on, Make sure the "Locate me" box is not checked, then enter the address you entered earlier in this format:
1234 Street name,
Anytown, AA 123456
MAKE SURE the comma's are in the right place!! Or it won't accept it.
5a. You may also need to go to Settings>Wifi Calling and select the Wifi You'll be connected to.
The address/location seemed to be the biggest issue. Once I figured that out, all was working great.
I'm doing this all from memory, so if anybody has any questions or comments that they've found, Please put them here. This is a great FREE feature that allows us to travel elsewhere and still use our phones. Obviously where you go requires Wifi for this to work.