Bootloop. - XPERIA X10 Q&A, Help & Troubleshooting

Help I tried reflashing WB 6 Rom and then removed the battery cause nothing would happen and now its stuck on a bootloop, i tried to load into Xrecovery but it won't. I'm desperate please.

zm4 said:
Help I tried reflashing WB 6 Rom and then removed the battery cause nothing would happen and now its stuck on a bootloop, i tried to load into Xrecovery but it won't. I'm desperate please.
Click to expand...
Click to collapse
I did notice that when flashing WB6 it would to a long time without any indication in the progress bar. If you would have waited, it eventually would have finished. Your best bet would be to reflash a complete ftf package with flashtool, root and reinstall xrecovery. you can then proceed to flash wb6 or restore the backup I know you took before you attempted to flash

Normally on WB's custom boot animation, the progress bar disappears after it fills up, then it's just a matter of waiting. Yes, it can take a while. If the progress bar restarts instead of disappearing then it's a boot loop, but this was not specified by the OP so I don't know.
I agree though, since Xrecovery is inaccessible, Flashtool is the way to go.
For reference, OP, which version of v6 did you flash? If it was v6c, Doomkernel can cause boot hangups on some devices.

Alright I will do a .ftf installation but where can I find the thread linking to that?

zm4 said:
Alright I will do a .ftf installation but where can I find the thread linking to that?
Click to expand...
Click to collapse
See the Flashtool guide sticky at the top if the page. You'll be able to find everything you need there.
Sent from my X10i using xda premium

Or google Sony Ericsson update service and install the software on your computer and follow instructions.
Sent from my X10i using Tapatalk

Related

[Q] x10 mini wont boot

I tried to install the gingerbread theme for my x10 mini and i followed all the instructions on http://aliwaqas.info/install-android-2-3-gingerbread-on-xperia-x10-mini-pro/. When i rebooted the phone it wont boot up i will only show the animation with the SE logo and then turn back off and do it agian and agian. I've tried to boot in safe mode but it doesnt help, how to do solve this? Anybody got any tips of what i can do because this really sucks! Thanks!!!
the theme may be not applicable. the only way is reflash your rom by using se update service
lh901121 said:
the theme may be not applicable. the only way is reflash your rom by using se update service
Click to expand...
Click to collapse
thats right, you must reflash, but what did you wrong?
Reflash - only variant. In future, use xRecovery(search in this forum), he knows how to do full backup of the firmware, and all user data.
simple flashtool 0.2.9 will solve ur problems, look for it on developement forum

Help please Hard Brick ???

Hello
I've installed the [ROM] MiniCM7-2.1.9 following this steps
i've previously installed a CWM
restart in recovery
wiped data/reset factory
wiped battery
wiped all ...
install Rom
install gapp
and now my phone doesn't goes to recovery and all i get is a black screen whit "Sony Ericsson" legend
please some help.
i post here, because i haven't permissions to post in the developer forum asking for help in the thread
sorry about my bad english
Did you unlock your bootloader using Flashtool?
You also need the latest version of nAa kernel installed.
Thanks for the answer
I didn't unlock my bootloader using Flashtool i haven't do that before and didn't read the installing instructions for doing that my fault
and didn't installed nAa kernel, because i think didn't need to install the kernel obligatorily
is anything i can do to solve this problem ??
You do need the nAa kernel to run MiniCM7, it just won't work without it. Next time you think about installing a rom, make sure you read all the instructions first. Especially if you're using custom kernels as that's a good way to give your phone a real hard brick.
What you've got is a soft brick. The phone still works, it just doesn't work as a phone. A hard brick is when your phone doesn't do anything at all. Which is bad.
All you need to do is download and use Sony Ericsson Update Service. This updates your phone to the latest, official firmware. If it complains that you already have it, choose the option to reinstall it anyway.
This will wipe all the data on your phone, but not your sdcard, so you'll lose your contacts, sms's, etc but you backed up anyway, didn't you?
thanks Ticklefish for the answer
i did that and now i've my phone back =D
Mine wont do that :-/
When i follow your steps Ticklefish i cant connect to the phone. it pops up with a message that tells me to pull down the status line which i cant because i only gets to the Sony Ericsson boot logo.
Got any tips for me?
thanks in advance
-Nikolaj
@niko5878..
which rom are u using?
may be i can help..
Niko5878 said:
When i follow your steps Ticklefish i cant connect to the phone. it pops up with a message that tells me to pull down the status line which i cant because i only gets to the Sony Ericsson boot logo.
Got any tips for me?
thanks in advance
-Nikolaj
Click to expand...
Click to collapse
Is your phone in download mode when you get that message? And is it SEUS you're using or PC Companion?
Sent from my U20i using XDA App
I am usin PC-Companion,
but after severals trys i made it work, so thats just briliant, you saved my smartphone
Awesome forum!
Thanks alot Ticklefish!
Yashu1019 said:
@niko5878..
which rom are u using?
may be i can help..
Click to expand...
Click to collapse
I think i was using the same as in this thread, that might e why it failed, but i'll just start rooting my phone now, and then wait and see
i'll just search around x10 forum to check out some tutorials, but thanks anyway

help! my mini pro stucked on sony ericsson logo

hey guys, this is my first time i would say i bricked my phone. i need someone to help me my phone has been in 'coma' for nearly 2 days now.
so this happened when i try to apply this mod http://forum.xda-developers.com/showthread.php?t=1306044 and after i carelessly copied framework-res.apk to system/framework using root explorer without setting the correct permissions, my phone automatically shuts off and try to restart but it failed, it stucked on the big sony ericsson logo and 'sony ericsson' text.
i have pull out the battery hundred times and try to reboot my phone normally but it didnt worked it still stucked on the sony ericsson logo.
so can anyone help me please...
what tools/application should i get to fix this?
first of all, i dont want to wipe/lose/factory reset my phone memory data because that would make my phone contacts gone which i never ever want to happen. so please is it possible to backup my contacts somewhere else if wiping is the answer at least??
okay i took a lot of time to type this and hoping someone give me an answer
Hi, what is your model no? and you rooted it?
Sent from my ST15i using xda premium
i use sk17i mini pro as mentioned above and yes it is obviously rooted
Congratulations, you have felt the power of customizing Android for the first
Actually, one way to fix this now, is to get back to fully stock firmware.
The second way would be to unlock bootloader, install a custom kernel, enter recovery and use Fix Permissions option. Unfortunately, not all Recoveries have this, only some versions of ClockworkMod Recovery. I have used many kernels on my LWW and only some of these included this option and I can't remember which one had, which not.
Someguyfromhell said:
Congratulations, you have felt the power of customizing Android for the first
Actually, one way to fix this now, is to get back to fully stock firmware.
The second way would be to unlock bootloader, install a custom kernel, enter recovery and use Fix Permissions option. Unfortunately, not all Recoveries have this, only some versions of ClockworkMod Recovery. I have used many kernels on my LWW and only some of these included this option and I can't remember which one had, which not.
Click to expand...
Click to collapse
actually, i have been in android customization for so long already when im still using my sold lg optimus one a year ago. i have flash a custom roms and kernels on that phone a lot of times so im not new on android customization at all.
i stayed away from customizing my sony ericsson phone cause its a bit different and hard here espeially when it comes to unlocking bootloader and that stuff
back to the real topic, so what tools do i need to get back to fully new stock firmware, remember, i cant boot my phone.
and how about my contacts, messages, will it be gone? omg i dont want it to be gone. please help me to make my phone boot normally without nothing lose especially my contacts
someone help me asap please, i feel bad for my phone just sitting there cant boot and cant do anything. its been 2 days i didnt use my phone!!
Izzy Stinson said:
actually, i have been in android customization for so long already when im still using my sold lg optimus one a year ago. i have flash a custom roms and kernels on that phone a lot of times so im not new on android customization at all.
i stayed away from customizing my sony ericsson phone cause its a bit different and hard here espeially when it comes to unlocking bootloader and that stuff
back to the real topic, so what tools do i need to get back to fully new stock firmware, remember, i cant boot my phone.
and how about my contacts, messages, will it be gone? omg i dont want it to be gone. please help me to make my phone boot normally without nothing lose especially my contacts
someone help me asap please, i feel bad for my phone just sitting there cant boot and cant do anything. its been 2 days i didnt use my phone!!
Click to expand...
Click to collapse
If contacts is too important for you and you have no backups, then go for the 2nd way - Unlock bootloader and install a custom kernel, which offers the Fix Permissions option.
I will check the Update Service, if Repair option will erase user data or not, currently updating my phone.
EDIT: Yes, removes all data.
Someguyfromhell said:
If contacts is too important for you and you have no backups, then go for the 2nd way - Unlock bootloader and install a custom kernel, which offers the Fix Permissions option.
I will check the Update Service, if Repair option will erase user data or not, currently updating my phone.
EDIT: Yes, removes all data.
Click to expand...
Click to collapse
okay okay i got a good news, i got my contacts backup month ago using smscontactsbackup app.
alright now, what if contacts is not important anymore and what is the 1st way?
btw how about flashtool? can i flash a new stock rom without wiping data, i think theres an option for that. but im not sure if its possible to use flashtool while my phone is off
Izzy Stinson said:
okay okay i got a good news, i got my contacts backup month ago using smscontactsbackup app.
alright now, what if contacts is not important anymore and what is the 1st way?
btw how about flashtool? can i flash a new stock rom without wiping data, i think theres an option for that. but im not sure if its possible to use flashtool while my phone is off
Click to expand...
Click to collapse
If you can access flashmode, then your okay. Just flash stock firmware.
Will check Flashtool option.
Yep, you're correct, Flashtool has option to not wipe user data.
Someguyfromhell said:
If you can access flashmode, then your okay. Just flash stock firmware.
Will check Flashtool option.
Yep, you're correct, Flashtool has option to not wipe user data.
Click to expand...
Click to collapse
nice. btw can you tell me step by step how to access flashmode using flashtool to flash a fresh stock rom?
i havent use it in a long time.
most importantly, can i use flashtool while my phone is off??
Izzy Stinson said:
nice. btw can you tell me step by step how to access flashmode using flashtool to flash a fresh stock rom?
i havent use it in a long time.
most importantly, can i use flashtool while my phone is off??
Click to expand...
Click to collapse
Flashmode - Turn off phone, connect USB cable to your computer, hold down Volume DOWN button and connect USB cable to your phone.
Flashtool guide is in my tutorial.
Someguyfromhell said:
Flashmode - Turn off phone, connect USB cable to your computer, hold down Volume DOWN button and connect USB cable to your phone.
Flashtool guide is in my tutorial.
Click to expand...
Click to collapse
i cant find your tutorial. link?
this will do? http://forum.xda-developers.com/showthread.php?t=928343
or maybe i should try what this guy says?
"Follow this guide External rooting guide but in steps 5 and 12 instead of "rootxperia.zip" use "mini_mod_v1.8.zip". Once you have phone fully booted I suggest to install CWM recovery mode (you probably don't have it now) - CWM installation file - run install-cwm1.cmd and follow the onscreen instructions. Then you will be able to enter CWM recovery via volume down button during booting."
http://forum.xda-developers.com/showthread.php?t=1306044&page=40
Izzy Stinson said:
i cant find your tutorial. link?
this will do? http://forum.xda-developers.com/showthread.php?t=928343
or maybe i should try what this guy says?
"Follow this guide External rooting guide but in steps 5 and 12 instead of "rootxperia.zip" use "mini_mod_v1.8.zip". Once you have phone fully booted I suggest to install CWM recovery mode (you probably don't have it now) - CWM installation file - run install-cwm1.cmd and follow the onscreen instructions. Then you will be able to enter CWM recovery via volume down button during booting."
http://forum.xda-developers.com/showthread.php?t=1306044&page=40
Click to expand...
Click to collapse
i followed your method. i flashed a stock firmware using flashtool via flashmode it says flashing completed. and now i want to boot my phone. it still stucked on the green se logo and 'sony ericsson' text. darn
edit: holy ****! my phone is now booted normally and none of my stuffs is gone
thanks so much for helping.
but root is gone. that shouldnt be a problem. thanks again
Izzy Stinson said:
i followed your method. i flashed a stock firmware using flashtool via flashmode it says flashing completed. and now i want to boot my phone. it still stucked on the green se logo and 'sony ericsson' text. darn
edit: holy ****! my phone is now booted normally and none of my stuffs is gone
thanks so much for helping.
but root is gone. that shouldnt be a problem. thanks again
Click to expand...
Click to collapse
You should probably get a backup app and backup your stuff or either root again and install CWM and backup that way
Izzy Stinson said:
i followed your method. i flashed a stock firmware using flashtool via flashmode it says flashing completed. and now i want to boot my phone. it still stucked on the green se logo and 'sony ericsson' text. darn
edit: holy ****! my phone is now booted normally and none of my stuffs is gone
thanks so much for helping.
but root is gone. that shouldnt be a problem. thanks again
Click to expand...
Click to collapse
Well he forgot to tell you that the first boot after every new 'fresh' flash required a little time for the phone to boot because it create cache at the boot animation...
Sent from my SK17a using xda premium
Izzy Stinson said:
i followed your method. i flashed a stock firmware using flashtool via flashmode it says flashing completed. and now i want to boot my phone. it still stucked on the green se logo and 'sony ericsson' text. darn
edit: holy ****! my phone is now booted normally and none of my stuffs is gone
thanks so much for helping.
but root is gone. that shouldnt be a problem. thanks again
Click to expand...
Click to collapse
which guide did you use i i have u20 model and mine is stuck on the white sony screen i cant boot into flash mode cause the phone turns on as soon as i plug it in to the comp i just baught this phone i wasnt even gonna touch it but it only has 2.1 and i cant install anything i have no sleep so i need to know if this neo tutorial will unlock my phone 4 hrs and still on the screen its prolly gonna die soon
plz help me thanks in advance gents
Actually, i think you could've salvaged your phone without the need of flashing it... If you had access to CWM, you could've put framework file into zip file and flash it with CWM. It helped me once when i got stuck in bootloop after failed installation of a mod
maso321 said:
which guide did you use i i have u20 model and mine is stuck on the white sony screen i cant boot into flash mode cause the phone turns on as soon as i plug it in to the comp i just baught this phone i wasnt even gonna touch it but it only has 2.1 and i cant install anything i have no sleep so i need to know if this neo tutorial will unlock my phone 4 hrs and still on the screen its prolly gonna die soon
plz help me thanks in advance gents
Click to expand...
Click to collapse
its very easy to recover your phone if you got bootloop or stuck at sony ericsson logo. dont sweat.
first of all you need a stock .ftf firmware downloaded. any .ftf stock firmware .58/62/42 or whatever as long as it is stock.
then download and install flashtool http://forum.xda-developers.com/showthread.php?t=1351309
then put your downloaded .ftf firmware at c:/program files/flashtool/firmwares/"your downloaded .ftf firmware"
then open flashtool and click on the lightning icon. and choose flashmode.
then press volume down button, while you do that connect your phone to pc using usb then flash the firmwares. then boom your phone back to life
Izzy Stinson said:
its very easy to recover your phone if you got bootloop or stuck at sony ericsson logo. dont sweat.
first of all you need a stock .ftf firmware downloaded. any .ftf stock firmware .58/62/42 or whatever as long as it is stock.
then download and install flashtool http://forum.xda-developers.com/showthread.php?t=1351309
then put your downloaded .ftf firmware at c:/program files/flashtool/firmwares/"your downloaded .ftf firmware"
then open flashtool and click on the lightning icon. and choose flashmode.
then press volume down button, while you do that connect your phone to pc using usb then flash the firmwares. then boom your phone back to life
Click to expand...
Click to collapse
do you know where i may get the software from ?
WORKED LIKE A CHARM !! thank you attemp number 2!
---------- Post added at 11:53 PM ---------- Previous post was at 11:34 PM ----------
Izzy Stinson said:
its very easy to recover your phone if you got bootloop or stuck at sony ericsson logo. dont sweat.
first of all you need a stock .ftf firmware downloaded. any .ftf stock firmware .58/62/42 or whatever as long as it is stock.
then download and install flashtool http://forum.xda-developers.com/showthread.php?t=1351309
then put your downloaded .ftf firmware at c:/program files/flashtool/firmwares/"your downloaded .ftf firmware"
then open flashtool and click on the lightning icon. and choose flashmode.
then press volume down button, while you do that connect your phone to pc using usb then flash the firmwares. then boom your phone back to life
Click to expand...
Click to collapse
you my friend are a dangous man !! flashing it now thanks again i got the stock rom
Problem Resolved
I think that is a bootloop problem , you can try this method. It helps http://www.youtube.com/watch?v=v4nfePh0KQc&feature=plcp
I also had this same problem when installing hybrom v17 with lock bootloader and stock kernel. It helped me a lot. Hit thanks if I helped

[Q]Boot Loop in E10

Hi,
I checked the forum and try those and it didnt work.
This is the story. i try to install a custom rom to my friend's xperia x10 mini. I unlocked the bootloader. Rooted and installed a kernel Jelly Bean Mini projects kernel. Also install the apk for CWM. After i flash the JB Mini Kernel i stuck at the JB Mini logo. Entering the CWM does not worked. Then i paniced and flashed the custom kernel. Then this time it is not opened only stuck at the SE logo. After that E10i_2.1.1.A.0.6_Sony Ericsson.ftf firmware and flashed via flash tool. This time is stuck in the boot logo loop. It didnt give a chance to flash another kernel again. Opening and resetting again. ALso PC Companion Repair doesnt work because it get disconnect on doing it.
Also i tried home screen and power button to reset and then try to flash mode and it didnt allow me to do it. Do you guys any suggestion. How can i get rid of it and get back to normal.
All helps will be appreciated. Thanks.
C0ND01N said:
Hi,
I checked the forum and try those and it didnt work.
This is the story. i try to install a custom rom to my friend's xperia x10 mini. I unlocked the bootloader. Rooted and installed a kernel Jelly Bean Mini projects kernel. Also install the apk for CWM. After i flash the JB Mini Kernel i stuck at the JB Mini logo. Entering the CWM does not worked. Then i paniced and flashed the custom kernel. Then this time it is not opened only stuck at the SE logo. After that E10i_2.1.1.A.0.6_Sony Ericsson.ftf firmware and flashed via flash tool. This time is stuck in the boot logo loop. It didnt give a chance to flash another kernel again. Opening and resetting again. ALso PC Companion Repair doesnt work because it get disconnect on doing it.
Also i tried home screen and power button to reset and then try to flash mode and it didnt allow me to do it. Do you guys any suggestion. How can i get rid of it and get back to normal.
All helps will be appreciated. Thanks.
Click to expand...
Click to collapse
connect it to SEUS and flash back to stock rom. even i have the same issue
alienwrz said:
connect it to SEUS and flash back to stock rom. even i have the same issue
Click to expand...
Click to collapse
Also connected to seus and tried.to repair means stock rom and kernel. But when I choose xperia mini after downloaded the items seus need to connect.device.in flash mode. But when I connect it.restart again and seus couldn't do.anything.
Maybe another solutions perhaps?
Thanks btw.
Sent from my LT18i using xda app-developers app
C0ND01N said:
Also connected to seus and tried.to repair means stock rom and kernel. But when I choose xperia mini after downloaded the items seus need to connect.device.in flash mode. But when I connect it.restart again and seus couldn't do.anything.
Maybe another solutions perhaps?
Thanks btw.
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
yes it will ask you to connect in flash mode.... while the pop up screen shows the image of phone. connect your via usb and press home+back key it will hard reboot the phone, once it off keep holding the back button you will see led turning green and it will go into flash mode and you follow the on screen instructions
let me know if it works
alienwrz said:
yes it will ask you to connect in flash mode.... while the pop up screen shows the image of phone. connect your via usb and press home+back key it will hard reboot the phone, once it off keep holding the back button you will see led turning green and it will go into flash mode and you follow the on screen instructions
let me know if it works
Click to expand...
Click to collapse
I also tried hard reboot like you said. It connect device and reboot again while disconnect then again and again. This time battery drained. Maybe fastboot mode will work and will save my...
I am at work atm. I will try when I get back to.home. I have Xperia arc also faced same loop situation but when I remove battery it works like a charm.
Also cwm didn't work on mini. Initiate the cwm is back button like on Xperia arc I guess.
Also need.help.after save this phone. Custom kernel, rom and how to run/install cwm.
Thanks
Sent from my LT18i using xda app-developers app
C0ND01N said:
I also tried hard reboot like you said. It connect device and reboot again while disconnect then again and again. This time battery drained. Maybe fastboot mode will work and will save my...
I am at work atm. I will try when I get back to.home. I have Xperia arc also faced same loop situation but when I remove battery it works like a charm.
Also cwm didn't work on mini. Initiate the cwm is back button like on Xperia arc I guess.
Also need.help.after save this phone. Custom kernel, rom and how to run/install cwm.
Thanks
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
Make sure you're talking about the right model phone, the Xperia Mini and Xperia x10 Mini are different phones. If you have the x10 Mini, then fastboot won't work at all.
Yes, CWM is available by repeatedly pressing the back-button when the kernel-logo shows, and it is included in ALL custom kernels for the x10 mini, just not on stock, so if you flash a custom kernel it is already available without any further action on your part.
C0ND01N said:
I also tried hard reboot like you said. It connect device and reboot again while disconnect then again and again. This time battery drained. Maybe fastboot mode will work and will save my...
I am at work atm. I will try when I get back to.home. I have Xperia arc also faced same loop situation but when I remove battery it works like a charm.
Also cwm didn't work on mini. Initiate the cwm is back button like on Xperia arc I guess.
Also need.help.after save this phone. Custom kernel, rom and how to run/install cwm.
Thanks
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
never flash under low battery... maintain atleast 50% of battery and then flash. i think the method i told dint work since u had low battery... charge it via wall socket and then try my method.
SmG67 said:
Make sure you're talking about the right model phone, the Xperia Mini and Xperia x10 Mini are different phones. If you have the x10 Mini, then fastboot won't work at all.
Yes, CWM is available by repeatedly pressing the back-button when the kernel-logo shows, and it is included in ALL custom kernels for the x10 mini, just not on stock, so if you flash a custom kernel it is already available without any further action on your part.
Click to expand...
Click to collapse
Hi,
U really.have my attention there. My friend have xperia x10 mini. I tried to install a custom rom on her device. But I messed things up. Unlocked the bootloader and installed jb mini.kernel and stucked on boot.logo. Then I flash custom kernel again now its stuck.on.boot logo like a loop. Seus repair wont work because it disconnects simultaneously. Also flashing a kernel didint work either. I hope somebody helps me to recovery the device. After that somehow I can install custom rom.
Thanks. I really appreciated.
Sent from my LT18i using xda app-developers app
C0ND01N said:
Hi,
U really.have my attention there. My friend have xperia x10 mini. I tried to install a custom rom on her device. But I messed things up. Unlocked the bootloader and installed jb mini.kernel and stucked on boot.logo. Then I flash custom kernel again now its stuck.on.boot logo like a loop. Seus repair wont work because it disconnects simultaneously. Also flashing a kernel didint work either. I hope somebody helps me to recovery the device. After that somehow I can install custom rom.
Thanks. I really appreciated.
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
Yes, the JB kernel requires you to format the /system, /data and /cache partitions in CWM on first boot, otherwise you get stuck, and you'll be unable to install the JB ROM. (Mind you, if it's version 4 of Stelios97's JB Kernel, that's been reported as not working at all)
(Not sure if you're doing your friend a favour with JB just yet, not if she wants to use her phone like she does now, you might be better off with MiniCM7)
Make sure your batter has a decent amount of charge in it, and try to flash this with flashtool, it's stock firmware that should get the phone back working properly.
After that, you can try again with the custom kernel and ROM.
SmG67 said:
Yes, the JB kernel requires you to format the /system, /data and /cache partitions in CWM on first boot, otherwise you get stuck, and you'll be unable to install the JB ROM. (Mind you, if it's version 4 of Stelios97's JB Kernel, that's been reported as not working at all)
(Not sure if you're doing your friend a favour with JB just yet, not if she wants to use her phone like she does now, you might be better off with MiniCM7)
Make sure your batter has a decent amount of charge in it, and try to flash this with flashtool, it's stock firmware that should get the phone back working properly.
After that, you can try again with the custom kernel and ROM.
Click to expand...
Click to collapse
i face same issue
I wanted to install gb or ics or jb on my x10mini (e10i)
my baseband is : M76XX-TSNCjoLYM-53404015
firmware : 2.1-update1
android v : 2.1.1.A.0.6.
i successfully rooted my phone and unlocked the bootloader using flashtools 0.9.8.0.
but my problem is when ever i try to flash custom kernel i get this error
Code:
ERR_SEVERITY="MAJOR";ERR_CLASS="MEMORY_CLASS";ERR_STATIC="HASH_VER";ERR_DYNAMIC="Failed to init erase";
i tried all custom kernel including nAa-13, nAa-14, nAa-ics,nAa-jb. everything fails and i get my phone semi bricked with phone reboots and all i get is white screen and LED glows White.
then i use SEUS to flash back to stock rom. i did this for almost 20times so far everytime it fails....
SmG67 said:
Yes, the JB kernel requires you to format the /system, /data and /cache partitions in CWM on first boot, otherwise you get stuck, and you'll be unable to install the JB ROM. (Mind you, if it's version 4 of Stelios97's JB Kernel, that's been reported as not working at all)
(Not sure if you're doing your friend a favour with JB just yet, not if she wants to use her phone like she does now, you might be better off with MiniCM7)
Make sure your batter has a decent amount of charge in it, and try to flash this with flashtool, it's stock firmware that should get the phone back working properly.
After that, you can try again with the custom kernel and ROM.
Click to expand...
Click to collapse
I will try what u said as soon as I get home. If I save the device 'll try your suggestion Rom and kernel.
Thanks
Sent from my LT18i using xda app-developers app
alienwrz said:
i face same issue
I wanted to install gb or ics or jb on my x10mini (e10i)
my baseband is : M76XX-TSNCjoLYM-53404015
firmware : 2.1-update1
android v : 2.1.1.A.0.6.
i successfully rooted my phone and unlocked the bootloader using flashtools 0.9.8.0.
but my problem is when ever i try to flash custom kernel i get this error
Code:
ERR_SEVERITY="MAJOR";ERR_CLASS="MEMORY_CLASS";ERR_STATIC="HASH_VER";ERR_DYNAMIC="Failed to init erase";
i tried all custom kernel including nAa-13, nAa-14, nAa-ics,nAa-jb. everything fails and i get my phone semi bricked with phone reboots and all i get is white screen and LED glows White.
then i use SEUS to flash back to stock rom. i did this for almost 20times so far everytime it fails....
Click to expand...
Click to collapse
I hope you chose flashmode when flashing and not fastboot?
SmG67 said:
Yes, the JB kernel requires you to format the /system, /data and /cache partitions in CWM on first boot, otherwise you get stuck, and you'll be unable to install the JB ROM. (Mind you, if it's version 4 of Stelios97's JB Kernel, that's been reported as not working at all)
(Not sure if you're doing your friend a favour with JB just yet, not if she wants to use her phone like she does now, you might be better off with MiniCM7)
Make sure your batter has a decent amount of charge in it, and try to flash this with flashtool, it's stock firmware that should get the phone back working properly.
After that, you can try again with the custom kernel and ROM.
Click to expand...
Click to collapse
I flashed your ftf it flashed without an error but there isnt any Sony logo or something. It bright a bit and reboot again. What do you think guys?
Hey,
is there another way to solve this problem? I really need that. Its been 2 days device down
Thanks
C0ND01N said:
Hey,
is there another way to solve this problem? I really need that. Its been 2 days device down
Thanks
Click to expand...
Click to collapse
Do you get a red led when you try to power it on?
SmG67 said:
Do you get a red led when you try to power it on?
Click to expand...
Click to collapse
Yea, when i try to connect in flashmode (back button and plug in) it gets a red led. Didint recognized Adb device after that.(Flash your ftf i guess)
Thanks.
C0ND01N said:
Yea, when i try to connect in flashmode (back button and plug in) it gets a red led. Didint recognized Adb device after that.(Flash your ftf i guess)
Thanks.
Click to expand...
Click to collapse
hmmmzzz, sounds like your battery is empty... leave it to charge, preferably from the wall-charger.
It *should* turn on, show the white Sony Ericsson text and then a battery...
SmG67 said:
hmmmzzz, sounds like your battery is empty... leave it to charge, preferably from the wall-charger.
It *should* turn on, show the white Sony Ericsson text and then a battery...
Click to expand...
Click to collapse
Now its green in flash mode
Also i tried again SEUS Repair and it said something like you dont have any software for you. Now what should i do? I charged
C0ND01N said:
Now its green in flash mode
Also i tried again SEUS Repair and it said something like you dont have any software for you. Now what should i do? I charged
Click to expand...
Click to collapse
If the ftf i sent you flashed without problem, you have the latest firmware from sony, so SEUS can't update your phone from that. What does it do when you connect it to the wallcharger?
SmG67 said:
If the ftf i sent you flashed without problem, you have the latest firmware from sony, so SEUS can't update your phone from that. What does it do when you connect it to the wallcharger?
Click to expand...
Click to collapse
I connect to the wallcharger and try to power on but there isnt any Sony Ericson logo. its just 1 moment bright screen and some kind of reboot i guess. Then a bright screen and then dark.
Do you know what is the problem here?

[Q] Sola - Can't restore stock firmware

Hi All,
I recently installed CM 9.1 on my Sola in the hope that it was a software problem that was stopping my reception from working. Alas, it was not, and while I was enjoying CM I now need to restore stock software to see if I can get the phone repaired.
I tried using flashtool, a version that has the .54 and .10 firmware built in. First I cleared all the cache as per the normal approach from the boot loader to install a new ROM, then I used flash tool to flash .54 stock firmware. Unfortunately now it has resulted in the boot loader being removed, but the boot still shows the CM startup and then after a screen saying "Android is updating" it says a whole bunch of services can't be open. Clicking OK just enters me into a loop of the same services failing to start. If I let the screen lock I can't do anything but a hard shutdown with power+volume up. The unfortunate thing about this is that then the phone starts up automatically and I can't go into flash mode to try anything else.
What is the best way forward from here? I can wait for the battery to go flat and then maybe get into flashmode, but how do I restore stock?
Thanks
Lionel
Lionel_82 said:
Hi All,
What is the best way forward from here? I can wait for the battery to go flat and then maybe get into flashmode, but how do I restore stock?
Thanks
Lionel
Click to expand...
Click to collapse
Figured out why the flash didn't work, the built in was just the kernel. So now I know how to do that part, just need to know the best way to get back into flashmode.
Must be a bad firmware you installed. Check if you have the correct drivers.
Sent from my HONAMI THEMED Nexus 5 using Tapatalk 2
Lionel_82 said:
Figured out why the flash didn't work, the built in was just the kernel. So now I know how to do that part, just need to know the best way to get back into flashmode.
Click to expand...
Click to collapse
Use SUS or PC Companion

Categories

Resources