[Q] back button vibrating problem - Sony Ericsson Xperia Mini, Mini Pro, Xperia Pro, A

hi all since i bought my phone i got some serious problem which was the back button and menu button keeps vibrating when playing some games r browsing for 10 min it almost gets worst when u were using outdoor it vibrates more and cant use anymore so i just taken to service center and checked out they said some touch pad problem r may b screen
just yest i given it to service center but i think it cud b problem with screen bec when u hold the sensor it goes dark and u can clearly c the vibrating reduced so v have to live in bark place to get rid of this and one more thing if u lock the phone there was no vibration as well so it wont b problem with processor r mother board its just the screen r touch pad may b
and did anyone tried out turning off bravia engine?

do you have the mini or the mini pro?

Shivatink said:
hi all since i bought my phone i got some serious problem which was the back button and menu button keeps vibrating when playing some games r browsing for 10 min it almost gets worst when u were using outdoor it vibrates more and cant use anymore so i just taken to service center and checked out they said some touch pad problem r may b screen
just yest i given it to service center but i think it cud b problem with screen bec when u hold the sensor it goes dark and u can clearly c the vibrating reduced so v have to live in bark place to get rid of this and one more thing if u lock the phone there was no vibration as well so it wont b problem with processor r mother board its just the screen r touch pad may b
and did anyone tried out turning off bravia engine?
Click to expand...
Click to collapse
My Xperia Mini gots the same problem and turning off bravia engine does not help

a-k-t-w said:
do you have the mini or the mini pro?
Click to expand...
Click to collapse
i have a SE mini ST15i. i got same problem. Help please!
tks

I had my unit for two weeks now and so far i've never encountered this problem even though i've been playing a lot of games for more than 30 minutes.
What color and build number are your mini's? You check it out at the back of the unit after you've removed the battery.
mine is 11W31 Mini ST15i Black

Mine got the problem after 2 weeks, mine is 11W29 Mini ST15i Black

i got the same problem too... its really annoying... hope someone wud come out with a solution,,...

So, during the first two weeks your phone was working perfectly. And only after having it more than two weeks then the problem starts?
I had my unit 2 weeks and 2 days now. and have not encountered the back menu malfunction.

Yup i given back to service center and got back with in a day now i was testing it for 3 days since no problem so lets c how it goes later after some days

it may be the overheat problem..... after charging for a couple of hours it happens..
if u dont experience it,, u r lucky...
have a look at this link.. http://talk.sonyericsson.com/message/111285#111285

Since I bought the unit I've been charging it overnight before I sleep and so far it doesn't overheat. I've read it in the manual that it was alright to charge it as often as you like.
It seems that the build of the touch pad of this model is defective, just like with their unit the G900 which also had a lot of complaints.
Sent from my ST15i using XDA App

Related

[Q] Xperia mini pro screen remains black

Hellow everybody! 4 days ago I got the screen I ordered from ebay and I have a big problem! I installed the screen on the phone, and the phone was booting up, the touch screen worked I could sense the lock screen when I touched it but nothing! Also the phone was burning! after noumerous tries , the screen finally worked the next day! But one day after , it had the same problem!Now the screen is black since two days ago! Any help! I tried repairing with pc companion, but the screen still remains black!!
Since you installed it yourself, you maybe made a mistake during install, something wrong got connected or something.
You said, that phone heated up. Some connections could have melted or even some chips.
xperia mini pro
The phone worked for a day before repairing. And it didnt worked for two days berfore repair, after it had worked!!
Does it work now or not?
Yes it works , the touch screen works i can feel it by sliding the lock button.
But it remains black, i heard sound about the battery. so the phone works but the screen remains black.
Seems like connection issue between mainboard and the screen. You mentioned getting warm - could have been too hot for the connections.
Sent from my WT19i using xda premium
No I've trying installing the screen many times , but the heat was coming from a single part of the motherboard , i opened the phoned and touched it! It was burnig hot! Now there is no heat , the phone boots up, i can sense the lock sliding when I move it (vibration) but i cant see anything!!! It worked for day perfect! The first morning , heated for some time , but it work after ten minutes for a whole day with no problem! the next day i went to the cafe of the village and connected to the internet by wi-fi connection, when I left, the problem started again ! And the phone is working , as I mentioned before, but the screen isn't viewing anything!

[Q] Xperia Ray - Black screen after stand by...

Hi, first sorry for my english, I hope that it will be clear enough to understand my problem...
My Xperia Ray, updated to ICS, display a black screen (with backlight) when waking up after a stand by. I have to wait for undertermined time to have something on the screen, sometimes I remove the battery and boot the phone to be able to use it.
I updated it to last 4.0.4 ICS thinking it will resolve the issue, but it has not.
I can still use the phone when connected to MyPhone Explorer with the phone keypad, while the mobile's screen is black the MPE windows shows me the "normal" mobile screen. Everythings else works normally.
I'm afraid to give it to customer service, it was a SFR branded phone and I flashed it with a generic firmware.
Locked bootloader, sfr gave me unlock code for sim cards, lost my root with last upadte too.
Any help ?
Did it also occur on Gingerbread firmware?
Didn't try with GB, it happened when on ICS .562, SEUS update to .431 didn't fix the problem.
I have the same problem with my Xperia Ray.
It already happened on GB and now also on ICS.
The screen stays black if you try to wake it up after standby (doesn't matter if power button or home button ).
This happens around 80% of the time.
The only things that help are: Waiting a few minutes, taking out the battery, or hitting the power button like crazy and eventually the screen will show up again after around 10 times on and off.
I brought my phone to the service center of the shop 3 times and every time they tell me they won't repair or switch it because the hardware looked fine in their opinion (they don't switch it on there, the one time I showed them the switched on phone with the error, they told me they could see the problem but as long as nothing inside is broken 'it's not their problem' . I told my lawyer and now he is trying to get me a replace phone.
The problem even comes right after you factory reset so I don't think it's an app.
It happens without the sd card in.
I had an different homescreen launcher installed around the time it first happened, but I removed it and it still happened and I factory reseted and it still happened. So I think it has nothing to do with that?
I tried software repair with the SE Update Service and it told me everything was alright.
Does someone around here have an idea what could be the cause?
I brought it to SFR customer service (here in france) 2 time, the 2 time they just downgrade it to GB, diagnostic was "update problem". They didn't take in consideration what I told them.
One of the shop employee told me that the third time normally they have to replace it by another one. If they don't want to change it I think I'll mess up their shop...
This even happens on Xperia Mini
when ever i try to wake it up by pressing Home button or Power button
it takes about 3-5 seconds to wakeup
it should be instant isn't it?
I also experienced 2 times that even pressing
all the buttons doesn't wakes up the screen
but only back light, then i have to restart the
phone by removing the battery.:crying:
Me too !
I have tha same problem !! I can't take it esay..It's bad thing in my Idea! very disgusting :crying:
I've got the same delays on my Lww, sometimes my phone doesn't wake up at all, and sometimes it takes several seconds. I haven't found any solution for it, but it seems to be a Sony-specific problem.
Sent from my Transformer Pad TF300T using xda app-developers app
I have also the same problem from some days
tried to reset all with flashtool with no luck
the problem is also during kernel loading,tried different kernel,logo and cw doesn't appear 90%times
if someone is able to read in logcat file I have attached one here
thanks for any help
me also
i also have the same problem with my xperia x10
bad news for all of us.....
http://youtu.be/m4p0-kv1cxA"
I took mine off silent and its working perfectly again. I'd try that!
HPJun said:
I took mine off silent and its working perfectly again. I'd try that!
Click to expand...
Click to collapse
sorry but I haven't understood....my language isn't english
Can you explain better please?
guerrierodipace said:
sorry but I haven't understood....my language isn't english
Can you explain better please?
Click to expand...
Click to collapse
I turned the sound for messages and phone calls back on. On 'silent' the phone just vibrated.
It hasnt fixed the problem of the black screen completely, but it is happening a lot less for me.
Finally I brought my Xperia Ray to the shop where I got it for the third time.
I bought it 159 Euros in december 2011 (plus Sony gave me 50E back) and they refunded 270 Euro in november 2012 !
Not exactly a refund because I had to choose another mobile, so I took the Xperia T which was 430euro, so I had to pay 160 E for the XT.
Good deal for replacement of a one year old mobile ! Only problem is that I can't unlock the BL.
It is a strange hardware problem since the screen can eventually be turned back on, so maybe it is something in the firmware that is screwed up and doesn't get completely fixed by SUS. If I were you guys I would try this fix: http://forum.xda-developers.com/showthread.php?t=1492805
It may not work, but it is better than throwing your Ray in the trash.
I have the same problem. My phone (xperia ray) after standby or after reboot has black screen with backlight. At first waiting for couple of seconds and trying to wakelock would solve the problem, after few weeks to wake up my phone I needed it to reboot (pulling out the battery). Now I need few reboots to start the device with screen on.
I found workarounds like Llama combined with Nightclock (both from Google Play) for the screen never goes off, but this eats battery and also sometimes the screen would go off. I don't believe its a hardware problem because with this workaround the phone is usable few days (until Llama delay the "events").
Found a way to make a logcat from starting the device. Two are for unsuccessful startups (black screen with backlight) and one for successful (screen on).
I think the problem is in the kernel for not loading drivers, but someone who knows to read logcat will tell us/me for sure. I can't flash new kernel because the phone is with Bootloader locked (Bootloader unlock allowed: NO).
Kernel version is 2.6.32.9-perf
Stock Rom 4.1.B.0.587
rooted
PS. Sorry for my english its not my native language.
Just to add one or two more informations: even with black screen and backlight the phone is usable, like I can answer on calls, it vibrates when I slide to unlock... I also thought the problem is in proximity sensor, but if it was that case the touchscreen would be locked.
If you fully discharge the battery and after switch on,it start normally?
guerrierodipace said:
If you fully discharge the battery and after switch on,it start normally?
Click to expand...
Click to collapse
I never tried full discharge of battery. I will try that and post the result.

[Q] [Go] touchscreen not as sensitive as usual.

Hello, I want your help to fix my xperia go touchscreen problem. Well, Ive searched the similar problem on the forum but what I found is about "touchscreen not working" only.. was, it's very easy to text and slide trough the screens without any "not so responsive screen".. after few months my xgo became less sensitive like before, when I tried to type as fast as usual. The screen cant detect my touch.. I compared with my friend's xgo and it is easier to text on his xgo.. its because I flashed wrong rom? I flashed one roms so far (superJB and currently back on stock with phantom 1.0.9 kernel) thanks.
Xgo .100 JB with UBL.
Open your device's build.prop using any text editor and check
ro.sf.lcd_density=??
Compare its value with your friend's xperia go and edit it accordingly. After you've done with editing, restart your device.
Check screenshot in the attachment.
Note: Do not put value similar to that of screenshot. It is just for your reference.
If I helped you then press Thank you.
Sent from my MT27i using xda premium
My Xperia Go has the exact same problem recently. It just started happening a few days ago and nothing has changed on the device (software etc). I used to be able to text VERY fast but now it sometimes takes a few pushes of the keys for the device to recognise my touch. I can't believe it is anything in the build.prop as this would have suddenly changed right? MY LCD density there is set to 160 (which is the same as default).
Any help appreciated...
EDIT - I also noticed that since my touchscreen has become un-responsive I had got battery drain issues. The last 2 nights I have gone to sleep and when I have woken up my battery is almost dead... hmmm
Devo1982 said:
My Xperia Go has the exact same problem recently. It just started happening a few days ago and nothing has changed on the device (software etc). I used to be able to text VERY fast but now it sometimes takes a few pushes of the keys for the device to recognise my touch. I can't believe it is anything in the build.prop as this would have suddenly changed right? MY LCD density there is set to 160 (which is the same as default).
Any help appreciated...
EDIT - I also noticed that since my touchscreen has become un-responsive I had got battery drain issues. The last 2 nights I have gone to sleep and when I have woken up my battery is almost dead... hmmm
Click to expand...
Click to collapse
I have same problems with my xperia go .it became unresponsive ..
i didnt drop it just became like that .
I get this issue too since i accidently drop it. But when i try to testing games and the phone getting heat up and now its more sensitive than before. Maybe not as sensitive as back there at GB but its better now. Almost as sensitive as when i try using JB at 1st time i think.
Oh yeah.. i even already try to open it before to check if the connector are losen or something like that with no result. And already prepare to changing my touchscreen but i think its not necesary now. Hope this help
i have the same problem, mine im gonna change the digitizer this month.
Yeah i think it's the digitalizer too... it happened to my friend that drop it or make him goes into swim pool water or sea water .
Well my have that problem too, but after few months without "swimming" it back almost normal or It has now become a habit ...
LENNUJ said:
i have the same problem, mine im gonna change the digitizer this month.
Click to expand...
Click to collapse
Please report here if your back to normal again after you change your digitizer. Coz mine still choosing something sometime if i swipe through it even the sensitivity is good now.
ah7 said:
Yeah i think it's the digitalizer too... it happened to my friend that drop it or make him goes into swim pool water or sea water .
Well my have that problem too, but after few months without "swimming" it back almost normal or It has now become a habit ...
Click to expand...
Click to collapse
I use mine to record fish on beach at first month but its still good at that time. Mine dropped few times but the last drop make it not sensitive as before, since i used it like what i post before the sensitivity back to normal but sometime (in 1 of 8) not recognize my touch.
yeah i will report here, try to dial *#*#7378423#*#* then service tests select touch screen now draw a line to see if there's something wrong on your touch screen, mine i never drop or submerge.
LENNUJ said:
yeah i will report here, try to dial *#*#7378423#*#* then service tests select touch screen now draw a line to see if there's something wrong on your touch screen, mine i never drop or submerge.
Click to expand...
Click to collapse
seems like mine is problem with digitizer too...(marking on red) Thx BTW
Do you use back cover? Mine is nillkin back cover i hope thats not affect the digitizer
Sent from my ST27i using xda premium
LENNUJ said:
Do you use back cover? Mine is nillkin back cover i hope thats not affect the digitizer
Sent from my ST27i using xda premium
Click to expand...
Click to collapse
yeah i use back cover too (i dont know about the brand). i dont think the back cover affect the digitizer coz i already use it at least 2 month after i buy mine but the digitizer is became troubled last month since i drop it.
LENNUJ said:
i have the same problem, mine im gonna change the digitizer this month.
Click to expand...
Click to collapse
Hey , does the touch screen turn to normal after you change the digitizer ?
Please give a feedback on that . Anyone ?
Red stripes shows dead spots on my Xperia U, ill try replacing Digitalizer next week, but if anyone can report it before, it would be helpfully.
im still stucked with my defective digitizer i got a problem with my order from china the item never arrive. i will try to buy another digitizer next week.
LENNUJ said:
im still stucked with my defective digitizer i got a problem with my order from china the item never arrive. i will try to buy another digitizer next week.
Click to expand...
Click to collapse
Its china...
SIGNATURE OUTDATED. I now use honami moonwalker 4.2
"AndroidNoob69.... Your favorite NOOB!"
UPDATE: I just got my replacement digitizer & i tested it, now my xgo live again but im still waiting the adhesive tape to stick it! :silly:
LENNUJ said:
UPDATE: I just got my replacement digitizer & i tested it, now my xgo live again but im still waiting the adhesive tape to stick it! :silly:
Click to expand...
Click to collapse
Nice... because i am planning to replace my digitizer by my self too when i got my digitizer spare . Just need to know what the other things i would need to change it perfectly (Make sure my XGO still have water resistant capability). Sooo... i would appreciate if u could reporting back when you done it .
Same problem.. My phone is not sensitive as usual.. When typing and gaming, it is really annoying.. :'(
How much is the digitizer for Xperia U?
I didn't do nothing and the phone just became not sensitive to touch.. Sliding is good but when I press 3 times to screen.. Only 2 times approx is known to touch..
Help me out ? Only way is change digitizer?
Just make sure u didnt get touchscreen issue from lag. I use custom rom and the touchscreen is feel better, but some area still hard to use because mine is defect already. U could try search on google for ur digitizer price .
Sent from my ST27i using xda app-developers app

[Q] Xperia MINI PRO sk17 , screen remains black, although working

HI everyone My Xperia Mini Pro worked just fine, then one day the screen remained black after unlocking it... it still worked, i could feel the touch and vibrations, i could basicly do everything just that i wasn't able to see it. After some shaking, pressing, sliding the keyboard out, it came back to its normal state, but would go black again if i pressed it hard and hold...Now the screen is always black. I hadn't really dropped it, it wasn't exposed to high temperatures, it just happened......i took it to some service centers and they have changed the flex cable a few times but didn't work..they assumed it was a hardware issue.....My warranty's long out.....WHAT SHOULD I DO???...Is there a chance that a screen change might help it and what would it cost me? please help
Toowoomba said:
HI everyone My Xperia Mini Pro worked just fine, then one day the screen remained black after unlocking it... it still worked, i could feel the touch and vibrations, i could basicly do everything just that i wasn't able to see it. After some shaking, pressing, sliding the keyboard out, it came back to its normal state, but would go black again if i pressed it hard and hold...Now the screen is always black. I hadn't really dropped it, it wasn't exposed to high temperatures, it just happened......i took it to some service centers and they have changed the flex cable a few times but didn't work..they assumed it was a hardware issue.....My warranty's long out.....WHAT SHOULD I DO???...Is there a chance that a screen change might help it and what would it cost me? please help
Click to expand...
Click to collapse
You have to replace the screen of course . Not very expensive i think .
Toowoomba said:
HI everyone My Xperia Mini Pro worked just fine, then one day the screen remained black after unlocking it... it still worked, i could feel the touch and vibrations, i could basicly do everything just that i wasn't able to see it. After some shaking, pressing, sliding the keyboard out, it came back to its normal state, but would go black again if i pressed it hard and hold...Now the screen is always black. I hadn't really dropped it, it wasn't exposed to high temperatures, it just happened......i took it to some service centers and they have changed the flex cable a few times but didn't work..they assumed it was a hardware issue.....My warranty's long out.....WHAT SHOULD I DO???...Is there a chance that a screen change might help it and what would it cost me? please help
Click to expand...
Click to collapse
My friend broke his XMP screen bro, and in the service center they charged it too heavy such that he can buy an another device
try flashing stock ics just to check if it is software problem else you have to bear expenses if you cant miss such a good device
you can buy cheap screen screen for your device on some asian web sites and mabe from ebay. if you need links, just tell me...
mutlu_live said:
you can buy cheap screen screen for your device on some asian web sites and mabe from ebay. if you need links, just tell me...
Click to expand...
Click to collapse
I need links

[Q] touchscreen dont work

hello everyone im french so if i dont type rigth sorry
so here is my problem i was in the pool with my xperia z2 and i was taking photos in the wather after it worked fine but i had not a lot of battery so i decided to turn the mobile off after 1 or 2 hours i turned the phone on but it didnt turn on so i charged it and after it worked "fine" only a small part of the screen dont respond what can i do ?
Wait day or two and see if things changed to screen work completely.If not,use your warranty if you have or you must to take him in some phone service.

Categories

Resources