Hmm what could be the issue? Or if i have to wait, how long to wait for the root to be clickable? I'm a little worn out over these issues, as part of it is my fault as i already have it rooted everything done. But funny thing is when i optimize my phone or try to install the android keyboard (not the default input) it won't reboot. So i went to use another flashtool to try to install it but ended up i face some issues but i got it fixed. Puzzled, are we not allowed to optimize or install custom apks?
You canNot optimize with flashtool (for 2.3) what are you running???
Sent from my Lauda X10a using XDA App
Try flash it again and don't optimize it with flash tool, it breaks xrec and might cause bootloop...
Sent from my Lauda X10a using XDA App
harissanja said:
You canNot optimize with flashtool (for 2.3) what are you running???
Sent from my Lauda X10a using XDA App
Click to expand...
Click to collapse
harissanja said:
Try flash it again and don't optimize it with flash tool, it breaks xrec and might cause bootloop...
Sent from my Lauda X10a using XDA App
Click to expand...
Click to collapse
Oh okay -_- I thought i could. Thanks alot guys, but now my phone can't seem to root. Able to flash but not root. Erm what's xrec?
Recovery, wich you can flash with flashyool...
Sent from my Lauda X10a using XDA App
What android verzion are you flashing? If its 2.3 there is tutorials on how to do it, hou have to downgrade kernel, root and upgrade kernel in order to ger root....
Sent from my Lauda X10a using XDA App
harissanja said:
Recovery, wich you can flash with flashyool...
Sent from my Lauda X10a using XDA App
Click to expand...
Click to collapse
harissanja said:
What android verzion are you flashing? If its 2.3 there is tutorials on how to do it, hou have to downgrade kernel, root and upgrade kernel in order to ger root....
Sent from my Lauda X10a using XDA App
Click to expand...
Click to collapse
I see. Yeah i followed, but how long will the root button clickable? If not i can't root at all. Another question, what's xrecovery for?
This happened to me as well, you gotta keep trying and it at the right moment. try flashing downgrade, then upgrade and then again downgrade and then try...it takes a few tries. I just rooted my device.
I have the same
is it rooting the 2.3.3 on x10i does not need to unlock the bootloaders 1st??
zm4 said:
This happened to me as well, you gotta keep trying and it at the right moment. try flashing downgrade, then upgrade and then again downgrade and then try...it takes a few tries. I just rooted my device.
Click to expand...
Click to collapse
Alright will try
Related
I have a P500 Froyo 2.2 v10a and I cant root with z4root: It says that is adquiring root shell and then quits...
Also, SuperOneClick 1.7 cant root it also....
Any ideas? thx
Mexican O1 has a diferent version that is not rootable, check Private message
Thx 4 the information
It seems that I need to flash the Canada version to root.
I used the SuperOneClick 1.7 too but not got ur issue like u,:-(
Sent from my LG-P500 using XDA Premium App
Try flashing a general unbranded rom, some continental version if you find. And root after that. I had the same problem with the Ro firmware, got an European Fw and it worked. Also try and stay below 10e to root.
As for information, Gingerbreak roots it.
You must try gingerbreak it will surely gonna root it ,but mind it its gonna root permanently, so you can't unroot again.
Sent from my LG-P500 using XDA Premium App
Nimitmak said:
You must try gingerbreak it will surely gonna root it ,but mind it its gonna root permanently, so you can't unroot again.
Sent from my LG-P500 using XDA Premium App
Click to expand...
Click to collapse
Yes, Gingerbreak is the solution.
But I think with KDZ firmware updater u can unroot the device.
iSiktir said:
Yes, Gingerbreak is the solution.
But I think with KDZ firmware updater u can unroot the device.
Click to expand...
Click to collapse
Kk
I was not knowing that.
Sent from my LG-P500 using XDA Premium App
Version 1.2 of Gingerbreak includes the Un-root option... so, just give it a try and report afterwards!
Gingerbreak have un-root option and it works fine. And if you flash oficial firmware with KDZ - you got un-root to.
system version: 4.1.83 att us
baseband version 01.77.15p
android version 2.2.2
i bricked my old atrix trying to install gingerblur on it. since i don't want to mess up again, can someone please help me with this? i'm pretty noobish on android (wnt form iphone 4 to atrix) and don't want to mess up again
thanks!
How do you hardbrick flashing gingerblur?
Sent from my MB860 using XDA App
Javi97100 said:
How do you hardbrick flashing gingerblur?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
lol dunno
i bought my atrix off of ebay, rooted and unlocked the bootloader, then messed up with gingerblur. maybe it was because i had the lastest updates installed on the atrix?
fdotorres said:
lol dunno
i bought my atrix off of ebay, rooted and unlocked the bootloader, then messed up with gingerblur. maybe it was because i had the lastest updates installed on the atrix?
Click to expand...
Click to collapse
With what recovery did you flash gingerblur
Sent from my MB860 using XDA App
Javi97100 said:
With what recovery did you flash gingerblur
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
tenfar's CWM
fdotorres said:
tenfar's CWM
Click to expand...
Click to collapse
You were supposed to flash through the system recovery app's recovery, but anyways back to your question. If you follow directions on how to do things im sure you'll be fine off, as of now the only way to hardbrick is to sbf back when you have the ota installed,
Sent from my MB860 using XDA App
Are you sure that your old atrix is hardbricked? Sounds like it would be more of a softbrick unless your old atrix had Gingerbread. Eitherway, it sounds fixable.
Javi97100 said:
You were supposed to flash through the system recovery app's recovery, but anyways back to your question. If you follow directions on how to do things im sure you'll be fine off, as of now the only way to hardbrick is to sbf back when you have the ota installed,
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
i'm unable to root it for some reason. tried cmd method as well as superoneclick... don't know what else to do
Do I have to flash doomlord's firmware and then go on super one click or from stock firmware from England can I just root with super one click safely.
Sent from my ST15i using XDA App
Anyone know?
Sent from my ST15i using XDA App
I used doomlords firmware and mines rooted successfully.
Try with his first, then if it works , try the English firmware and do the same steps.
Sorry if im not clear with my answers this is the first forum ive actively posted on
Sent from my SK17i using XDA App
superoneclick uses exploits to get root if the phone doesnt have unsecure kernel. However, there is no exploit for the new gingerbread SE software right now (gingerbreak is fixed!). Therefore there is now chance right now to get root without unlocking bootloader and flash unsecure kernel :/
Therefore you have to flash the unsecure kernel, and then superoneclick gets root quite easily.
Oh, so basically the unsecure kernel hasnt got the patch or fix or update that stops you from rooting, its been removed ? Am I right ???
Sent from my SK17i using XDA App
no, there is just an option "secure" which (if set to 0) allows superoneclick to root very easy!
Oh k, I get it
Sent from my SK17i using XDA App
Hi, I rooted my XPS and I was wondering if I could just upgrade the way its suposed to upgrade, trough sony siteor whatever, and still keep the root and doomkernel
Sent from my LT26i using xda app-developers app
You need to relock the bootloader in order to use the official way to upgrade.
hello_hello said:
You need to relock the bootloader in order to use the official way to upgrade.
Click to expand...
Click to collapse
I tried the way what you said, and failed. Just installed ICS from flashtool.
isaacius0323 said:
I tried the way what you said, and failed. Just installed ICS from flashtool.
Click to expand...
Click to collapse
Is there a way to flash it trough recovery
Sent from my LT26i using xda app-developers app
I just got this phone from my sister, but last year I rooted it. I think it was the superoneclick thing? Any way Its still on att rom and firmware version is 2.1update1. build number 2.1.A.0.492. and I want to know if I can put a custom rom n it and if so how? Thanks in advance
Yes u can and look through the threads or watch a YouTube video hope this helps
Sent from my X10i using xda premium
Thanks! Unlocked bootloader, flashed 2.3, rooted it,and flashed xRecovery. Also im about to put miui 2.3.2 or X10S
gamingwiz said:
Thanks! Unlocked bootloader, flashed 2.3, rooted it,and flashed xRecovery. Also im about to put miui 2.3.2 or X10S
Click to expand...
Click to collapse
how u did it , any help will be appreciated
I used flash tool, upgraded the phone to 2.3, rooted it, installed 0.3 recovery, unlocked the bootloader, and finally I installed miui 2.3.7. All of it was done with flashtool
Sent from my X10 using xda app-developers app
gamingwiz said:
I used flash tool, upgraded the phone to 2.3, rooted it, installed 0.3 recovery, unlocked the bootloader, and finally I installed miui 2.3.7. All of it was done with flashtool
Sent from my X10 using xda app-developers app
Click to expand...
Click to collapse
lol it seems easy when u just say it
qazafee said:
lol it seems easy when u just say it
Click to expand...
Click to collapse
It is quite easy once you have done it a couple of times. I used to flash my x10 on a daily basis. Sometimes 3 or 4 times a day because I was bored or several ROM updates came at once lol
Sent from my GT-N7100 using xda premium
Haha yeah, I did that on my mytouch 4g before it got hard bricked
Sent from my X10 using xda app-developers app
EpicLordPhone said:
I just got this phone from my sister, but last year I rooted it. I think it was the superoneclick thing? Any way Its still on att rom and firmware version is 2.1update1. build number 2.1.A.0.492. and I want to know if I can put a custom rom n it and if so how? Thanks in advance
Click to expand...
Click to collapse
read here http://forum.xda-developers.com/showthread.php?t=678513 and here http://forum.xda-developers.com/showthread.php?t=920746